product standard rev-02 date: july 10, 2017 … 1 of 1 product standard rev-02 date: july 10, 2017...
TRANSCRIPT
Page 1 of 1 Product Standard
REV-02
Date: July 10, 2017 FIT.U.BUSH.BRS.DYN
Fitting, Utility Grade, Bushing, NPT, Brass The information below lists the required dimensional, chemical and physical characteristics of the products in this purchase order. If
the order received does not meet these requirements, it may result in a supplier corrective action request, which could jeopardize your
status as an approved vendor. Unless otherwise specified, all referenced consensus standards must be adhered to in their entirety.
Safety Factor 4:1
Specification Requirements:
• Dimensions: See Table Above
• Material: C36000 Brass; In compliance with current RoHS European
Union Directive. In addition, minimum
Copper content 57%, maximum alloying elements 5%,
remainder zinc.
• Threads: NPT per ASME B1.20.1
• Marking: DF® (size permitting)
• Finish: Plain, as processed
C D E F
OALShoulder
LengthBore ID WAF
Max.
69850 1/4 x 1/8 0.591 0.453 0.327 0.625 1200
69851 3/8 x 1/8 0.748 0.551 0.327 0.689 1200
69853 1/2 x 1/8 0.748 0.551 0.327 0.875 1200
69856 3/4 x 1/8 0.906 0.610 0.327 1.063 1200
69852 3/8 x 1/4 0.689 0.512 0.429 0.689 1200
69854 1/2x1/4 0.748 0.551 0.429 0.875 1200
69857 3/4 x 1/4 0.906 0.610 0.429 1.063 1200
69362 1 x 1/4 1.122 0.748 0.429 1.375 1200
69855 1/2 x 3/8 0.748 0.551 0.567 0.875 1200
69858 3/4 x 3/8 0.878 0.650 0.559 1.063 1200
69859 3/4 x 1/2 0.878 0.650 0.693 1.063 1200
69364 1 x 1/2 1.083 0.768 1.043 1.375 1200
69860 1 x 3/4 1.154 0.787 0.894 1.375 1200
Part
NumberB x A
+/- 0.008"
Working
Pressure
(psi)