product spec sheetsof ballistic helmets against the hpw-tp-0401b standard which helps to better...
TRANSCRIPT
PRODUCT SPEC SHEETS
STRIKER HELMETS OVERVIEW
Compliance at Type IIIA requires that new and unworn armor samples protect against .357 SIG FMJ Flat Nose (FN) bullets with a specified mass of 8.1 g (125 gr) and a veloc-ity of 448 m/s ± 9.1 m/s (1470 ft/s ± 30 ft/s) and with .44 Magnum Semi Jacketed Hollow Point (SJHP) bullets with a specified mass of 15.6 g (240 gr) and a velocity of 436 m/s ± 9.1 m/s (1430 ft/s ± 30 ft/s). Compliance at Type IIIA also requires that conditioned armor samples protect against .357 SIG FMJ FN bullets with a specified mass of 8.1 g (125 gr) and a velocity of 430 m/s ± 9.1 m/s (1410 ft/s ± 30 ft/s) and with .44 Magnum SJHP bullets with a specified mass of 15.6 g (240 gr) and a velocity of 408 m/s ± 9.1 m/s (1340 ft/s ± 30 ft/s).
HighCom offers a wide range of Helmet styles, shapes, and configurations for use by Military and Law Enforcement throughout the world. Our helmets are designed to be high performing while ensuring a lightweight solution for our customers. Because our helmets are designed and manufactured using US Mil Spec standards and materials from leading companies like DuPont, Hon-eywell, and DSM, we are able to warranty and ensure a long life of consistent and reliable use for our customers deploying in all combat and tactical situations.
We test our helmets against many standards such as in accordance with NIJ, Mil-Std, ASTM, CRASH, including critical impact and trauma standards to ensure proper end results to protect our operators no matter what the deployment purpose. Ballistic capa-bility of our helmets includes independent tests according to the NIJ 0106.01 standard. We also perform testing against V50 and special threats and can work with specific demands of our customer requirements to protect against other domestic and interna-tional or custom designed threat assessments when requested.
HighCom has and will continue to test specific models of ballistic helmets against the HPW-TP-0401B standard which helps to better measure and determine the back face trauma and performance of ballistic shells against var-ious threats related to the NIJ 0106.01 standard Level IIIA.
HighCom helmets are tested according to the Stanag 2920 / Mil-Std 662f which is used as the Protection Ballistic Limit (PBL) V50 among the most elegant performance metrics for armor systems. The V50 is intended to define the veloci-ty at which 50% of projectiles (of identical material type, hardness, strength, mass and geometry) will perforate an armor system, and 50% will be defeated by the armor. A methodology and the threats for the estimation of V50 velocity is defined in MIL-STD-662F.
COLORSBlack Desert Tan Coyote Tan
OD Green Foliage Navy
HPW-TP-0401B
STANAG 2920 / MIL SPEC 662f
NIJ LEVEL IIIA NIJ 0106.01 Compliant
Striker ACH™ Striker HPACHMC ™
Striker ACHMC™ Striker HPACHHC™
Striker ACHHC™ Striker PLT™
Striker ULACH™ Striker PLTp4™
Striker ULACHMC™ Striker ULPLT™
Striker ULACHHC™ Striker HPPLT™
Striker HPACH ™
Helmet Accessories
HighCom Suspension and Retention Systems
HighCom Helmet Accessories
Team Wendy Helmet Accessories
Paulson Helmet Accessories
Ops Core Helmet Accessories
160101.08.kg - ver 8.00 approved: Aug 3 2016
Department of State ITAR / Department of Commerce EAR: This data sheet is for an EXPORT CONTROLLED PRODUCT. The export of these products and technical information related to these products is governed by the U.S. Department of State International Traffic in Arms Regulations (ITAR) and/or the Department of Commerce Export Administration Regulations (EAR). Non-Sales Technical Data related to these products must not be transmitted to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative, civil, or criminal penalties. ITAR/EAR Export Licenses and/or ITAR/EAR Brokering Licenses (as appropriate) will be required prior to submittal of any further technical information and/or shipment of samples and/or products. DISCLAIMER The information contained in this specification is intended solely to provide general guidance. The right is reserved to make changes to this specification without notice at any time. Nothing in this specification (i) constitutes an offer, representation, warranty, term or condition or (ii) is a substitute for the need to employ adequate independent technical expertise and judgment. COPYRIGHT NOTICE Material featured in this specification is subject to copyright protection and may not be used in any product or service, modified, adapted, published, distributed or reproduced without obtaining prior written permission. Any requests for such permission should be made in writing.
+ Protection: Level IIIA according to NIJ 0106.01 including Frag protection according to Mil Std 662f
+ NIJ Standard 0106.01: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0106.01 by an NIJ accredited laboratory
+ Materials Including: Kevlar® fibers and thermoset resin shell construction
+ Head protection: Front, back, crown, and top of head
+ Adjustable: Multiple Harness options and comes standard with 4 pt H
+ Harness Padding: D3O TRUST 7 Pad helmet system + Optional: Team Wendy Cam Fit and Ops Core Rails
and Shroud + Warranty: 5 years on all ballistic material excluding
exterior cover and 1 year on exterior cover material and workmanship
STRIKER SERIES ACH: ADVANCED COMBAT HELMET LEVEL IIIA STANDARD CUT
CARTRIDGE PROJECTILE VEL (FT/S ± 30) VEL (M/S ± 9)
.357 SIG (NIJ06) 125 gr FMJ 1470 448
.44 Magnum (NIJ06) 240 gr SJHP 1430 436
.357 Magnum 158 gr JSP 1430 435
.44 Magnum 240 gr SWCGC 1400 426
9 x 19 mm Parabellum 124 gr FMJ RN 1400 426
40 S&W 180 gr FMJ 1155 352
V50 17 gr 2221 677
SIZE LENGTH WIDTH CIRCUMFERENCE WEIGHT
S 7.1 to 7.6 5.6 to 6.0 21.1 to 21.9 1220 g 1.2 kg 2.7 lbs
M 7.6 to 7.9 6.0 to 6.3 21.9 to 22.7 1280 g 1.3 kg 2.8 lbs
L 7.9 to 8.3 6.3 to 6.5 22.7 to 24 1350 g 1.4 kg 3.0 lbs
XL 8.3 to 8.8 6.5 to 7.1 24 to 26 1450 g 1.5 kg 3.2 lbs
FEATURES
SIZE AND WEIGHT CHART
Weight tolerance +/- .15lbs / .068kg
WEAPON TYPE
STANDARD CUT OPSCORE RAILS + SHROUD (OPTIONAL) TEAM WENDY CAM-FIT (OPTIONAL)
BLACK DESERT TAN COYOTE TAN
OD GREEN FOLIAGE NAVY
COLORS
NIJ 0106.01LIGHT WEIGHT MULTI HITMIL-STD 662f
160101.08.kg - ver 8.00 approved: Aug 3 2016
Department of State ITAR / Department of Commerce EAR: This data sheet is for an EXPORT CONTROLLED PRODUCT. The export of these products and technical information related to these products is governed by the U.S. Department of State International Traffic in Arms Regulations (ITAR) and/or the Department of Commerce Export Administration Regulations (EAR). Non-Sales Technical Data related to these products must not be transmitted to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative, civil, or criminal penalties. ITAR/EAR Export Licenses and/or ITAR/EAR Brokering Licenses (as appropriate) will be required prior to submittal of any further technical information and/or shipment of samples and/or products. DISCLAIMER The information contained in this specification is intended solely to provide general guidance. The right is reserved to make changes to this specification without notice at any time. Nothing in this specification (i) constitutes an offer, representation, warranty, term or condition or (ii) is a substitute for the need to employ adequate independent technical expertise and judgment. COPYRIGHT NOTICE Material featured in this specification is subject to copyright protection and may not be used in any product or service, modified, adapted, published, distributed or reproduced without obtaining prior written permission. Any requests for such permission should be made in writing.
STRIKER SERIES ACHMC: ADVANCED COMBAT HELMET LEVEL IIIA MID CUT
MID CUT OPSCORE RAILS + SHROUD (OPTIONAL) TEAM WENDY CAM-FIT (OPTIONAL)
+ Protection: Level IIIA according to NIJ 0106.01 including Frag protection according to Mil Std 662f
+ NIJ Standard 0106.01: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0106.01 by an NIJ accredited laboratory
+ Materials Including: Kevlar® fibers and thermoset resin shell construction
+ Head protection: Front, back, crown, and top of head
+ Adjustable: Multiple Harness options and comes standard with 4 pt H
+ Harness Padding: D3O TRUST 7 Pad helmet system + Optional: Team Wendy Cam Fit and Ops Core Rails
and Shroud + Warranty: 5 years on all ballistic material excluding
exterior cover and 1 year on exterior cover material and workmanship
Cartridge Projectile Velocity (ft/s ± 30) Velocity (m/s ± 9)
.357 SIG (NIJ06) 125 gr FMJ 1470 448
.44 Magnum (NIJ06) 240 gr SJHP 1430 436
.357 Magnum 158 gr JSP 1430 435
.44 Magnum 240 gr SWCGC 1400 426
9 x 19 mm Parabellum 124 gr FMJ RN 1400 426
40 S&W 180 gr FMJ 1155 352
V50 17 gr 2221 677
Size Length Width Circumference Weight
S 7.1 to 7.6 5.6 to 6.0 21.1 to 21.9 1170 g 1.2 kg 2.6 lbs
M 7.6 to 7.9 6.0 to 6.3 21.9 to 22.7 1225 g 1.2 kg 2.7 lbs
L 7.9 to 8.3 6.3 to 6.5 22.7 to 24 1290 g 1.3 kg 2.8 lbs
XL 8.3 to 8.8 6.5 to 7.1 24 to 26 1385 g 1.4 kg 3.0 lbs
FEATURES
SIZE AND WEIGHT CHART
Weight tolerance +/- .15lbs / .068kg
WEAPON TYPE
BLACK DESERT TAN COYOTE TAN
OD GREEN FOLIAGE NAVY
COLORS
NIJ 0106.01LIGHT WEIGHT MULTI HITMIL-STD 662f
160101.08.kg - ver 8.00 approved: Aug 3 2016
Department of State ITAR / Department of Commerce EAR: This data sheet is for an EXPORT CONTROLLED PRODUCT. The export of these products and technical information related to these products is governed by the U.S. Department of State International Traffic in Arms Regulations (ITAR) and/or the Department of Commerce Export Administration Regulations (EAR). Non-Sales Technical Data related to these products must not be transmitted to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative, civil, or criminal penalties. ITAR/EAR Export Licenses and/or ITAR/EAR Brokering Licenses (as appropriate) will be required prior to submittal of any further technical information and/or shipment of samples and/or products. DISCLAIMER The information contained in this specification is intended solely to provide general guidance. The right is reserved to make changes to this specification without notice at any time. Nothing in this specification (i) constitutes an offer, representation, warranty, term or condition or (ii) is a substitute for the need to employ adequate independent technical expertise and judgment. COPYRIGHT NOTICE Material featured in this specification is subject to copyright protection and may not be used in any product or service, modified, adapted, published, distributed or reproduced without obtaining prior written permission. Any requests for such permission should be made in writing.
STRIKER SERIES ACHHC: ADVANCED COMBAT HELMET LEVEL IIIA HIGH CUT
+ Protection: Level IIIA according to NIJ 0106.01 including Frag protection according to Mil Std 662f
+ NIJ Standard 0106.01: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0106.01 by an NIJ accredited laboratory
+ Materials Including: Kevlar® fibers and thermoset resin shell construction
+ Head protection: Front, back, crown, and top of head
+ Adjustable: Multiple Harness options and comes standard with 4 pt H
+ Harness Padding: D3O TRUST 7 Pad helmet system + Optional: Team Wendy Cam Fit and Ops Core Rails
and Shroud + Warranty: 5 years on all ballistic material excluding
exterior cover and 1 year on exterior cover material and workmanship CARTRIDGE PROJECTILE VEL (FT/S ± 30) VEL (M/S ± 9)
.357 SIG (NIJ06) 125 gr FMJ 1470 448
.44 Magnum (NIJ06) 240 gr SJHP 1430 436
.357 Magnum 158 gr JSP 1430 435
.44 Magnum 240 gr SWCGC 1400 426
9 x 19 mm Parabellum 124 gr FMJ RN 1400 426
40 S&W 180 gr FMJ 1155 352
V50 17 gr 2221 677
SIZE LENGTH WIDTH CIRCUMFERENCE WEIGHT
S 7.1 to 7.6 5.6 to 6.0 21.1 to 21.9 1120 g 1.1 kg 2.5 lbs
M 7.6 to 7.9 6.0 to 6.3 21.9 to 22.7 1175 g 1.2 kg 2.6 lbs
L 7.9 to 8.3 6.3 to 6.5 22.7 to 24 1235 g 1.2 kg 2.7 lbs
XL 8.3 to 8.8 6.5 to 7.1 24 to 26 1320 g 1.3 kg 2.9 lbs
SIZE AND WEIGHT CHART
Weight tolerance +/- .15lbs / .068kg
WEAPON TYPE
FEATURES
HIGH CUT OPSCORE RAILS + SHROUD (OPTIONAL) TEAM WENDY CAM-FIT (OPTIONAL)
BLACK DESERT TAN COYOTE TAN
OD GREEN FOLIAGE NAVY
COLORS
NIJ 0106.01LIGHT WEIGHT MULTI HITMIL-STD 662f
160101.08.kg - ver 8.00 approved: Aug 3 2016
Department of State ITAR / Department of Commerce EAR: This data sheet is for an EXPORT CONTROLLED PRODUCT. The export of these products and technical information related to these products is governed by the U.S. Department of State International Traffic in Arms Regulations (ITAR) and/or the Department of Commerce Export Administration Regulations (EAR). Non-Sales Technical Data related to these products must not be transmitted to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative, civil, or criminal penalties. ITAR/EAR Export Licenses and/or ITAR/EAR Brokering Licenses (as appropriate) will be required prior to submittal of any further technical information and/or shipment of samples and/or products. DISCLAIMER The information contained in this specification is intended solely to provide general guidance. The right is reserved to make changes to this specification without notice at any time. Nothing in this specification (i) constitutes an offer, representation, warranty, term or condition or (ii) is a substitute for the need to employ adequate independent technical expertise and judgment. COPYRIGHT NOTICE Material featured in this specification is subject to copyright protection and may not be used in any product or service, modified, adapted, published, distributed or reproduced without obtaining prior written permission. Any requests for such permission should be made in writing.
+ Protection: Level IIIA according to NIJ 0106.01 including Frag protection according to Mil Std 662f
+ NIJ Standard 0106.01: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0106.01 by an NIJ accredited laboratory
+ Materials Including: UHMWPE Spectra® fibers and thermoset resin shell construction
+ Head protection: Front, back, crown, and top of head
+ Adjustable: Multiple Harness options and comes standard with 4 pt H
+ Harness Padding: D3O TRUST 7 Pad helmet system + Optional: Team Wendy Cam Fit and Ops Core Rails
and Shroud + Warranty: 5 years on all ballistic material excluding
exterior cover and 1 year on exterior cover material and workmanship
STRIKER SERIES ULACH: ULTRA LIGHTWEIGHT ADVANCED COMBAT HELMET LEVEL IIIA STANDARD CUT
STANDARD CUT OPSCORE RAILS + SHROUD (OPTIONAL) TEAM WENDY CAM-FIT (OPTIONAL)
FEATURES
Black Desert Tan Coyote Tan
OD Green Foliage Navy
COLORS
CARTRIDGE PROJECTILE VEL (FT/S ± 30) VEL (M/S ± 9)
.357 SIG (NIJ06) 125 gr FMJ 1470 448
.44 Magnum (NIJ06) 240 gr SJHP 1430 436
.357 Magnum 158 gr JSP 1430 435
.44 Magnum 240 gr SWCGC 1400 426
9 x 19 mm Parabellum 124 gr FMJ RN 1400 426
40 S&W 180 gr FMJ 1155 352
V50 17 gr 2221 677
SIZE LENGTH WIDTH CIRCUMFERENCE WEIGHT
S 7.1 to 7.6 5.6 to 6.0 21.1 to 21.9 890 g 0.9 kg 2.0 lbs
M 7.6 to 7.9 6.0 to 6.3 21.9 to 22.7 950 g 1.0 kg 2.1 lbs
L 7.9 to 8.3 6.3 to 6.5 22.7 to 24 1030 g 1.0 kg 2.3 lbs
XL 8.3 to 8.8 6.5 to 7.1 24 to 26 1120 g 1.1 kg 2.5 lbs
SIZE AND WEIGHT CHART
Weight tolerance +/- .15lbs / .068kg
WEAPON TYPE
NIJ 0106.01LIGHT WEIGHT MULTI HITMIL-STD 662f
160101.08.kg - ver 8.00 approved: Aug 3 2016
Department of State ITAR / Department of Commerce EAR: This data sheet is for an EXPORT CONTROLLED PRODUCT. The export of these products and technical information related to these products is governed by the U.S. Department of State International Traffic in Arms Regulations (ITAR) and/or the Department of Commerce Export Administration Regulations (EAR). Non-Sales Technical Data related to these products must not be transmitted to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative, civil, or criminal penalties. ITAR/EAR Export Licenses and/or ITAR/EAR Brokering Licenses (as appropriate) will be required prior to submittal of any further technical information and/or shipment of samples and/or products. DISCLAIMER The information contained in this specification is intended solely to provide general guidance. The right is reserved to make changes to this specification without notice at any time. Nothing in this specification (i) constitutes an offer, representation, warranty, term or condition or (ii) is a substitute for the need to employ adequate independent technical expertise and judgment. COPYRIGHT NOTICE Material featured in this specification is subject to copyright protection and may not be used in any product or service, modified, adapted, published, distributed or reproduced without obtaining prior written permission. Any requests for such permission should be made in writing.
STRIKER SERIES ULACHMC: ULTRA LIGHTWEIGHT ADVANCED COMBAT HELMET LEVEL IIIA MID CUT
MID CUT OPSCORE RAILS + SHROUD (OPTIONAL) TEAM WENDY CAM-FIT (OPTIONAL)
+ Protection: Level IIIA according to NIJ 0106.01 including Frag protection according to Mil Std 662f
+ NIJ Standard 0106.01: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0106.01 by an NIJ accredited laboratory
+ Materials Including: UHMWPE Spectra® fibers and thermoset resin shell construction
+ Head protection: Front, back, crown, and top of head
+ Adjustable: Multiple Harness options and comes standard with 4 pt H
+ Harness Padding: D3O TRUST 7 Pad helmet system + Optional: Team Wendy Cam Fit and Ops Core Rails
and Shroud + Warranty: 5 years on all ballistic material excluding
exterior cover and 1 year on exterior cover material and workmanship
FEATURES
Black Desert Tan Coyote Tan
OD Green Foliage Navy
COLORS
CARTRIDGE PROJECTILE VEL (FT/S ± 30) VEL (M/S ± 9)
.357 SIG (NIJ06) 125 gr FMJ 1470 448
.44 Magnum (NIJ06) 240 gr SJHP 1430 436
.357 Magnum 158 gr JSP 1430 435
.44 Magnum 240 gr SWCGC 1400 426
9 x 19 mm Parabellum 124 gr FMJ RN 1400 426
40 S&W 180 gr FMJ 1155 352
V50 17 gr 2221 677
SIZE LENGTH WIDTH CIRCUMFERENCE WEIGHT
S 7.1 to 7.6 5.6 to 6.0 21.1 to 21.9 830 g 0.8 kg 1.8 lbs
M 7.6 to 7.9 6.0 to 6.3 21.9 to 22.7 890 g 0.9 kg 2.0 lbs
L 7.9 to 8.3 6.3 to 6.5 22.7 to 24 970 g 1.0 kg 2.1 lbs
XL 8.3 to 8.8 6.5 to 7.1 24 to 26 1060 g 1.1 kg 2.3 lbs
SIZE AND WEIGHT CHART
Weight tolerance +/- .15lbs / .068kg
WEAPON TYPE
NIJ 0106.01LIGHT WEIGHT MULTI HITMIL-STD 662f
160101.08.kg - ver 8.00 approved: Aug 3 2016
Department of State ITAR / Department of Commerce EAR: This data sheet is for an EXPORT CONTROLLED PRODUCT. The export of these products and technical information related to these products is governed by the U.S. Department of State International Traffic in Arms Regulations (ITAR) and/or the Department of Commerce Export Administration Regulations (EAR). Non-Sales Technical Data related to these products must not be transmitted to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative, civil, or criminal penalties. ITAR/EAR Export Licenses and/or ITAR/EAR Brokering Licenses (as appropriate) will be required prior to submittal of any further technical information and/or shipment of samples and/or products. DISCLAIMER The information contained in this specification is intended solely to provide general guidance. The right is reserved to make changes to this specification without notice at any time. Nothing in this specification (i) constitutes an offer, representation, warranty, term or condition or (ii) is a substitute for the need to employ adequate independent technical expertise and judgment. COPYRIGHT NOTICE Material featured in this specification is subject to copyright protection and may not be used in any product or service, modified, adapted, published, distributed or reproduced without obtaining prior written permission. Any requests for such permission should be made in writing.
STRIKER SERIES ULACHHC: ULTRA LIGHTWEIGHT ADVANCED COMBAT HELMET LEVEL IIIA HIGH CUT
HIGH CUT OPSCORE RAILS + SHROUD (OPTIONAL) TEAM WENDY CAM-FIT (OPTIONAL)
+ Protection: Level IIIA according to NIJ 0106.01 including Frag protection according to Mil Std 662f
+ NIJ Standard 0106.01: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0106.01 by an NIJ accredited laboratory
+ Materials Including: UHMWPE Spectra® fibers and thermoset resin shell construction
+ Head protection: Front, back, crown, and top of head
+ Adjustable: Multiple Harness options and comes standard with 4 pt H
+ Harness Padding: D3O TRUST 7 Pad helmet system + Optional: Team Wendy Cam Fit and Ops Core Rails
and Shroud + Warranty: 5 years on all ballistic material excluding
exterior cover and 1 year on exterior cover material and workmanship
FEATURES
BLACK DESERT TAN COYOTE TAN
OD GREEN FOLIAGE NAVY
COLORS
CARTRIDGE PROJECTILE VEL (FT/S ± 30) VEL (M/S ± 9)
.357 SIG (NIJ06) 125 gr FMJ 1470 448
.44 Magnum (NIJ06) 240 gr SJHP 1430 436
.357 Magnum 158 gr JSP 1430 435
.44 Magnum 240 gr SWCGC 1400 426
9 x 19 mm Parabellum 124 gr FMJ RN 1400 426
40 S&W 180 gr FMJ 1155 352
V50 17 gr 2221 677
SIZE LENGTH WIDTH CIRCUMFERENCE WEIGHT
S 7.1 to 7.6 5.6 to 6.0 21.1 to 21.9 770 g 0.8 kg 1.7 lbs
M 7.6 to 7.9 6.0 to 6.3 21.9 to 22.7 830 g 0.8 kg 1.8 lbs
L 7.9 to 8.3 6.3 to 6.5 22.7 to 24 910 g 0.9 kg 2.0 lbs
XL 8.3 to 8.8 6.5 to 7.1 24 to 26 1000 g 1.0 kg 2.2 lbs
SIZE AND WEIGHT CHART
Weight tolerance +/- .15lbs / .068kg
WEAPON TYPE
NIJ 0106.01LIGHT WEIGHT MULTI HITMIL-STD 662f
160101.08.kg - ver 8.00 approved: Aug 3 2016
Department of State ITAR / Department of Commerce EAR: This data sheet is for an EXPORT CONTROLLED PRODUCT. The export of these products and technical information related to these products is governed by the U.S. Department of State International Traffic in Arms Regulations (ITAR) and/or the Department of Commerce Export Administration Regulations (EAR). Non-Sales Technical Data related to these products must not be transmitted to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative, civil, or criminal penalties. ITAR/EAR Export Licenses and/or ITAR/EAR Brokering Licenses (as appropriate) will be required prior to submittal of any further technical information and/or shipment of samples and/or products. DISCLAIMER The information contained in this specification is intended solely to provide general guidance. The right is reserved to make changes to this specification without notice at any time. Nothing in this specification (i) constitutes an offer, representation, warranty, term or condition or (ii) is a substitute for the need to employ adequate independent technical expertise and judgment. COPYRIGHT NOTICE Material featured in this specification is subject to copyright protection and may not be used in any product or service, modified, adapted, published, distributed or reproduced without obtaining prior written permission. Any requests for such permission should be made in writing.
+ Protection: Level IIIA according to NIJ 0106.01 including Frag protection according to Mil Std 662f
+ NIJ Standard 0106.01: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0106.01 by an NIJ accredited laboratory
+ Materials Including: hybridized Kevlar® fibers and UHMWPE Spectra® shell construction
+ Head protection: Front, back, crown, and top of head
+ Adjustable: Multiple Harness options and comes standard with 4 pt H
+ Harness Padding: D3O TRUST 7 Pad helmet system + Optional: Team Wendy Cam Fit and Ops Core Rails
and Shroud + Warranty: 5 years on all ballistic material excluding
exterior cover and 1 year on exterior cover material and workmanship
STRIKER SERIES HPACH: HIGH PERFORMANCE ADVANCED COMBAT HELMET LEVEL IIIA STANDARD CUT
STANDARD CUT OPSCORE RAILS + SHROUD (OPTIONAL) TEAM WENDY CAM-FIT (OPTIONAL)
FEATURES
BLACK DESERT TAN COYOTE TAN
OD GREEN FOLIAGE NAVY
COLORS
SIZE LENGTH WIDTH CIRCUMFERENCE WEIGHT
S 7.1 to 7.6 5.6 to 6.0 21.1 to 21.9 1250 g 1.3 kg 2.8 lbs
M 7.6 to 7.9 6.0 to 6.3 21.9 to 22.7 1310 g 1.3 kg 2.9 lbs
L 7.9 to 8.3 6.3 to 6.5 22.7 to 24 1380 g 1.4 kg 3.0 lbs
XL 8.3 to 8.8 6.5 to 7.1 24 to 26 1480 g 1.5 kg 3.3 lbs
SIZE AND WEIGHT CHART
Weight tolerance +/- .15lbs / .068kg
CARTRIDGE PROJECTILE VEL (FT/S ± 30) VEL (M/S ± 9)
.357 SIG (NIJ06) 125 gr FMJ 1470 448
.44 Magnum (NIJ06) 240 gr SJHP 1430 436
.357 Magnum 158 gr JSP 1430 435
.44 Magnum 240 gr SWCGC 1400 426
9 x 19 mm Parabellum 124 gr FMJ RN 1400 426
40 S&W 180 gr FMJ 1155 352
V50 17gr 2579 786
WEAPON TYPE
NIJ 0106.01LIGHT WEIGHT MULTI HITMIL-STD 662f
160101.08.kg - ver 8.00 approved: Aug 3 2016
Department of State ITAR / Department of Commerce EAR: This data sheet is for an EXPORT CONTROLLED PRODUCT. The export of these products and technical information related to these products is governed by the U.S. Department of State International Traffic in Arms Regulations (ITAR) and/or the Department of Commerce Export Administration Regulations (EAR). Non-Sales Technical Data related to these products must not be transmitted to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative, civil, or criminal penalties. ITAR/EAR Export Licenses and/or ITAR/EAR Brokering Licenses (as appropriate) will be required prior to submittal of any further technical information and/or shipment of samples and/or products. DISCLAIMER The information contained in this specification is intended solely to provide general guidance. The right is reserved to make changes to this specification without notice at any time. Nothing in this specification (i) constitutes an offer, representation, warranty, term or condition or (ii) is a substitute for the need to employ adequate independent technical expertise and judgment. COPYRIGHT NOTICE Material featured in this specification is subject to copyright protection and may not be used in any product or service, modified, adapted, published, distributed or reproduced without obtaining prior written permission. Any requests for such permission should be made in writing.
HPACHMC: HIGH PERFORMANCE ADVANCED COMBAT HELMET LEVEL IIIA MID CUT
STRIKER SERIES
MID CUT OPSCORE RAILS + SHROUD (OPTIONAL) TEAM WENDY CAM-FIT (OPTIONAL)
+ Protection: Level IIIA according to NIJ 0106.01 including Frag protection according to Mil Std 662f
+ NIJ Standard 0106.01: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0106.01 by an NIJ accredited laboratory
+ Materials Including: hybridized Kevlar® fibers and UHMWPE Spectra® shell construction
+ Head protection: Front, back, crown, and top of head
+ Adjustable: Multiple Harness options and comes standard with 4 pt H
+ Harness Padding: D3O TRUST 7 Pad helmet system + Optional: Team Wendy Cam Fit and Ops Core Rails
and Shroud + Warranty: 5 years on all ballistic material excluding
exterior cover and 1 year on exterior cover material and workmanship
FEATURES
BLACK DESERT TAN COYOTE TAN
OD GREEN FOLIAGE NAVY
COLORS
CARTRIDGE PROJECTILE VEL (FT/S ± 30) VEL (M/S ± 9)
.357 SIG (NIJ06) 125 gr FMJ 1470 448
.44 Magnum (NIJ06) 240 gr SJHP 1430 436
.357 Magnum 158 gr JSP 1430 435
.44 Magnum 240 gr SWCGC 1400 426
9 x 19 mm Parabellum 124 gr FMJ RN 1400 426
40 S&W 180 gr FMJ 1155 352
V50 17gr 2579 786
WEAPON TYPE
SIZE LENGTH WIDTH CIRCUMFERENCE WEIGHT
S 7.1 to 7.6 5.6 to 6.0 21.1 to 21.9 1200 g 1.2 kg 2.6 lbs
M 7.6 to 7.9 6.0 to 6.3 21.9 to 22.7 1255 g 1.3 kg 2.8 lbs
L 7.9 to 8.3 6.3 to 6.5 22.7 to 24 1320 g 1.3 kg 2.9 lbs
XL 8.3 to 8.8 6.5 to 7.1 24 to 26 1415 g 1.4 kg 3.1 lbs
SIZE AND WEIGHT CHART
Weight tolerance +/- .15lbs / .068kg
NIJ 0106.01LIGHT WEIGHT MULTI HITMIL-STD 662f
160101.08.kg - ver 8.00 approved: Aug 3 2016
Department of State ITAR / Department of Commerce EAR: This data sheet is for an EXPORT CONTROLLED PRODUCT. The export of these products and technical information related to these products is governed by the U.S. Department of State International Traffic in Arms Regulations (ITAR) and/or the Department of Commerce Export Administration Regulations (EAR). Non-Sales Technical Data related to these products must not be transmitted to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative, civil, or criminal penalties. ITAR/EAR Export Licenses and/or ITAR/EAR Brokering Licenses (as appropriate) will be required prior to submittal of any further technical information and/or shipment of samples and/or products. DISCLAIMER The information contained in this specification is intended solely to provide general guidance. The right is reserved to make changes to this specification without notice at any time. Nothing in this specification (i) constitutes an offer, representation, warranty, term or condition or (ii) is a substitute for the need to employ adequate independent technical expertise and judgment. COPYRIGHT NOTICE Material featured in this specification is subject to copyright protection and may not be used in any product or service, modified, adapted, published, distributed or reproduced without obtaining prior written permission. Any requests for such permission should be made in writing.
STRIKER SERIES HPACHHC: HIGH PERFORMANCE ADVANCED COMBAT HELMET LEVEL IIIA HIGH CUT
HIGH CUT OPSCORE RAILS + SHROUD (OPTIONAL) TEAM WENDY CAM-FIT (OPTIONAL)
+ Protection: Level IIIA according to NIJ 0106.01 including Frag protection according to Mil Std 662f
+ NIJ Standard 0106.01: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0106.01 by an NIJ accredited laboratory
+ Materials Including: hybridized Kevlar® fibers and UHMWPE Spectra® shell construction
+ Head protection: Front, back, crown, and top of head
+ Adjustable: Multiple Harness options and comes standard with 4 pt H
+ Harness Padding: D3O TRUST 7 Pad helmet system + Optional: Team Wendy Cam Fit and Ops Core Rails
and Shroud + Warranty: 5 years on all ballistic material excluding
exterior cover and 1 year on exterior cover material and workmanship
FEATURES
BLACK DESERT TAN COYOTE TAN
OD GREEN FOLIAGE NAVY
COLORS
SIZE LENGTH WIDTH CIRCUMFERENCE WEIGHT
S 7.1 to 7.6 5.6 to 6.0 21.1 to 21.9 1150 g 1.2 kg 2.5 lbs
M 7.6 to 7.9 6.0 to 6.3 21.9 to 22.7 1205 g 1.2 kg 2.7 lbs
L 7.9 to 8.3 6.3 to 6.5 22.7 to 24 1265 g 1.3 kg 2.8 lbs
XL 8.3 to 8.8 6.5 to 7.1 24 to 26 1350 g 1.4 kg 3 lbs
SIZE AND WEIGHT CHART
Weight tolerance +/- .15lbs / .068kg
CARTRIDGE PROJECTILE VEL (FT/S ± 30) VEL (M/S ± 9)
.357 SIG (NIJ06) 125 gr FMJ 1470 448
.44 Magnum (NIJ06) 240 gr SJHP 1430 436
.357 Magnum 158 gr JSP 1430 435
.44 Magnum 240 gr SWCGC 1400 426
9 x 19 mm Parabellum 124 gr FMJ RN 1400 426
40 S&W 180 gr FMJ 1155 352
V50 17gr 2579 786
WEAPON TYPE
NIJ 0106.01LIGHT WEIGHT MULTI HITMIL-STD 662f
160101.08.kg - ver 8.00 approved: Aug 3 2016
Department of State ITAR / Department of Commerce EAR: This data sheet is for an EXPORT CONTROLLED PRODUCT. The export of these products and technical information related to these products is governed by the U.S. Department of State International Traffic in Arms Regulations (ITAR) and/or the Department of Commerce Export Administration Regulations (EAR). Non-Sales Technical Data related to these products must not be transmitted to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative, civil, or criminal penalties. ITAR/EAR Export Licenses and/or ITAR/EAR Brokering Licenses (as appropriate) will be required prior to submittal of any further technical information and/or shipment of samples and/or products. DISCLAIMER The information contained in this specification is intended solely to provide general guidance. The right is reserved to make changes to this specification without notice at any time. Nothing in this specification (i) constitutes an offer, representation, warranty, term or condition or (ii) is a substitute for the need to employ adequate independent technical expertise and judgment. COPYRIGHT NOTICE Material featured in this specification is subject to copyright protection and may not be used in any product or service, modified, adapted, published, distributed or reproduced without obtaining prior written permission. Any requests for such permission should be made in writing.
+ Protection: Level IIIA according to NIJ 0106.01 including Frag protection according to Mil Std 662f
+ NIJ Standard 0106.01: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0106.01 by an NIJ accredited laboratory
+ Materials Including: Kevlar® fibers and thermoset resin shell construction
+ Head protection: Front, back, crown, and top of head
+ Adjustable: Multiple Harness options and comes standard with 3 PT US PASGT Harness
+ Warranty: 5 years on all ballistic material exclud-ing exterior cover and 1 year on exterior cover material and workmanship
STRIKER SERIES PLT PASGT LEVEL IIIA
FEATURES
BLACK DESERT TAN COYOTE TAN
OD GREEN FOLIAGE NAVY
COLORS
CARTRIDGE PROJECTILE VEL (FT/S ± 30) VEL (M/S ± 9)
.357 SIG (NIJ06) 125 gr FMJ 1470 448
.44 Magnum (NIJ06) 240 gr SJHP 1430 436
.357 Magnum 158 gr JSP 1430 435
.44 Magnum 240 gr SWCGC 1400 426
9 x 19 mm Parabellum 124 gr FMJ RN 1400 426
40 S&W 180 gr FMJ 1155 352
V50 17gr 2258 688
WEAPON TYPE
SIZE LENGTH WIDTH CIRCUMFERENCE WEIGHT
S 7.1 to 7.6 5.6 to 6.0 21.1 to 21.9 1285 g 1.3 kg 2.8 lbs
M 7.6 to 7.9 6.0 to 6.3 21.9 to 22.7 1335 g 1.3 kg 2.9 lbs
L 7.9 to 8.3 6.3 to 6.5 22.7 to 24 1425 g 1.4 kg 3.1 lbs
XL 8.3 to 8.8 6.5 to 7.1 24 to 26 1475 g 1.5 kg 3.3 lbs
SIZE AND WEIGHT CHART
Weight tolerance +/- .15lbs / .068kg
NIJ 0106.01PASGT MULTI HITMIL-STD 662f
160101.08.kg - ver 8.00 approved: Aug 3 2016
Department of State ITAR / Department of Commerce EAR: This data sheet is for an EXPORT CONTROLLED PRODUCT. The export of these products and technical information related to these products is governed by the U.S. Department of State International Traffic in Arms Regulations (ITAR) and/or the Department of Commerce Export Administration Regulations (EAR). Non-Sales Technical Data related to these products must not be transmitted to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative, civil, or criminal penalties. ITAR/EAR Export Licenses and/or ITAR/EAR Brokering Licenses (as appropriate) will be required prior to submittal of any further technical information and/or shipment of samples and/or products. DISCLAIMER The information contained in this specification is intended solely to provide general guidance. The right is reserved to make changes to this specification without notice at any time. Nothing in this specification (i) constitutes an offer, representation, warranty, term or condition or (ii) is a substitute for the need to employ adequate independent technical expertise and judgment. COPYRIGHT NOTICE Material featured in this specification is subject to copyright protection and may not be used in any product or service, modified, adapted, published, distributed or reproduced without obtaining prior written permission. Any requests for such permission should be made in writing.
STRIKER SERIES PLTp4 PASGT LEVEL IIIA WITH 4pt + PADS
+ Protection: Level IIIA according to NIJ 0106.01 including Frag protection according to Mil Std 662f
+ NIJ Standard 0106.01: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0106.01 by an NIJ accredited laboratory
+ Materials Including: Kevlar® fibers and thermoset resin shell construction
+ Head protection: Front, back, crown, and top of head
+ Adjustable: Multiple Harness options and comes standard with 3 PT US PASGT Harness
+ Padding: Multiple harness options comes standard with 4 pt. H with D3O TRUST 7 Pad helmet system
+ Warranty: 5 years on all ballistic material excluding exterior cover and 1 year on exterior cover material and workmanship
FEATURES
BLACK DESERT TAN COYOTE TAN
OD GREEN FOLIAGE NAVY
COLORS
CARTRIDGE PROJECTILE VEL (FT/S ± 30) VEL (M/S ± 9)
.357 SIG (NIJ06) 125 gr FMJ 1470 448
.44 Magnum (NIJ06) 240 gr SJHP 1430 436
.357 Magnum 158 gr JSP 1430 435
.44 Magnum 240 gr SWCGC 1400 426
9 x 19 mm Parabellum 124 gr FMJ RN 1400 426
40 S&W 180 gr FMJ 1155 352
V50 17gr 2258 688
WEAPON TYPE
SIZE LENGTH WIDTH CIRCUMFERENCE WEIGHT
S 7.1 to 7.6 5.6 to 6.0 21.1 to 21.9 1305 g 1.3 kg 2.9 lbs
M 7.6 to 7.9 6.0 to 6.3 21.9 to 22.7 1365 g 1.4 kg 3.0 lbs
L 7.9 to 8.3 6.3 to 6.5 22.7 to 24 1455 g 1.5 kg 3.2 lbs
XL 8.3 to 8.8 6.5 to 7.1 24 to 26 1505 g 1.5 kg 3.3 lbs
SIZE AND WEIGHT CHART
Weight tolerance +/- .15lbs / .068kg
NIJ 0106.01PASGT MULTI HITMIL-STD 662f
160101.08.kg - ver 8.00 approved: Aug 3 2016
Department of State ITAR / Department of Commerce EAR: This data sheet is for an EXPORT CONTROLLED PRODUCT. The export of these products and technical information related to these products is governed by the U.S. Department of State International Traffic in Arms Regulations (ITAR) and/or the Department of Commerce Export Administration Regulations (EAR). Non-Sales Technical Data related to these products must not be transmitted to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative, civil, or criminal penalties. ITAR/EAR Export Licenses and/or ITAR/EAR Brokering Licenses (as appropriate) will be required prior to submittal of any further technical information and/or shipment of samples and/or products. DISCLAIMER The information contained in this specification is intended solely to provide general guidance. The right is reserved to make changes to this specification without notice at any time. Nothing in this specification (i) constitutes an offer, representation, warranty, term or condition or (ii) is a substitute for the need to employ adequate independent technical expertise and judgment. COPYRIGHT NOTICE Material featured in this specification is subject to copyright protection and may not be used in any product or service, modified, adapted, published, distributed or reproduced without obtaining prior written permission. Any requests for such permission should be made in writing.
+ Protection: Level IIIA according to NIJ 0106.01 including Frag protection according to Mil Std 662f
+ NIJ Standard 0106.01: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0106.01 by an NIJ accredited laboratory
+ Materials Including: UHMWPE Spectra® fibers and thermoset resin shell construction
+ Head protection: Front, back, crown, and top of head
+ Adjustable: Multiple Harness options and comes standard with 3 PT US PASGT Harness
+ Padding: Multiple harness options comes standard with 4 pt. H with D3O TRUST 7 Pad helmet system
+ Warranty: 5 years on all ballistic material excluding exterior cover and 1 year on exterior cover material and workmanship
STRIKER SERIES ULPLT ULTRA LIGHT WEIGHT PASGT LEVEL IIIA
FEATURES
BLACK DESERT TAN COYOTE TAN
OD GREEN FOLIAGE NAVY
COLORS
CARTRIDGE PROJECTILE VEL (FT/S ± 30) VEL (M/S ± 9)
.357 SIG (NIJ06) 125 gr FMJ 1470 448
.44 Magnum (NIJ06) 240 gr SJHP 1430 436
.357 Magnum 158 gr JSP 1430 435
.44 Magnum 240 gr SWCGC 1400 426
9 x 19 mm Parabellum 124 gr FMJ RN 1400 426
40 S&W 180 gr FMJ 1155 352
V50 17gr 2258 688
WEAPON TYPE
SIZE LENGTH WIDTH CIRCUMFERENCE WEIGHT
S 7.1 to 7.6 5.6 to 6.0 21.1 to 21.9 950 g 1.0 kg 2.1 lbs
M 7.6 to 7.9 6.0 to 6.3 21.9 to 22.7 1030 g 1.0 kg 2.3 lbs
L 7.9 to 8.3 6.3 to 6.5 22.7 to 24 1110 g 1.1 kg 2.5 lbs
XL 8.3 to 8.8 6.5 to 7.1 24 to 26 1220 g 1.2 kg 2.7 lbs
SIZE AND WEIGHT CHART
Weight tolerance +/- .15lbs / .068kg
NIJ 0106.01MULTI HITMIL-STD 662f PASGT LIGHT WEIGHT
160101.08.kg - ver 8.00 approved: Aug 3 2016
Department of State ITAR / Department of Commerce EAR: This data sheet is for an EXPORT CONTROLLED PRODUCT. The export of these products and technical information related to these products is governed by the U.S. Department of State International Traffic in Arms Regulations (ITAR) and/or the Department of Commerce Export Administration Regulations (EAR). Non-Sales Technical Data related to these products must not be transmitted to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative, civil, or criminal penalties. ITAR/EAR Export Licenses and/or ITAR/EAR Brokering Licenses (as appropriate) will be required prior to submittal of any further technical information and/or shipment of samples and/or products. DISCLAIMER The information contained in this specification is intended solely to provide general guidance. The right is reserved to make changes to this specification without notice at any time. Nothing in this specification (i) constitutes an offer, representation, warranty, term or condition or (ii) is a substitute for the need to employ adequate independent technical expertise and judgment. COPYRIGHT NOTICE Material featured in this specification is subject to copyright protection and may not be used in any product or service, modified, adapted, published, distributed or reproduced without obtaining prior written permission. Any requests for such permission should be made in writing.
STRIKER SERIES HPPLT HIGH PERFORMANCE LEVEL IIIA
+ Protection: Level IIIA according to NIJ 0106.01 including Frag protection according to Mil Std 662f
+ NIJ Standard 0106.01: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0106.01 by an NIJ accredited laboratory
+ Materials Including: hybridized Kevlar® fibers and UHMWPE Spectra® shell construction
+ Head protection: Front, back, crown, and top of head
+ Adjustable: Multiple Harness options and comes standard with 3 PT US PASGT Harness
+ Padding: Multiple harness options comes standard with 4 pt. H with D3O TRUST 7 Pad helmet system
+ Warranty: 5 years on all ballistic material excluding exterior cover and 1 year on exterior cover material and workmanship
FEATURES
CARTRIDGE PROJECTILE VEL (FT/S ± 30) VEL (M/S ± 9)
.357 SIG (NIJ06) 125 gr FMJ 1470 448
.44 Magnum (NIJ06) 240 gr SJHP 1430 436
.357 Magnum 158 gr JSP 1430 435
.44 Magnum 240 gr SWCGC 1400 426
9 x 19 mm Parabellum 124 gr FMJ RN 1400 426
40 S&W 180 gr FMJ 1155 352
V50 17gr 2654 809
WEAPON TYPE
SIZE LENGTH WIDTH CIRCUMFERENCE WEIGHT
S 7.1 to 7.6 5.6 to 6.0 21.1 to 21.9 1315 g 1.3 kg 2.9 lbs
M 7.6 to 7.9 6.0 to 6.3 21.9 to 22.7 1365 g 1.4 kg 3.0 lbs
L 7.9 to 8.3 6.3 to 6.5 22.7 to 24 1455 g 1.5 kg 3.2 lbs
XL 8.3 to 8.8 6.5 to 7.1 24 to 26 1505 g 1.5 kg 3.3 lbs
SIZE AND WEIGHT CHART
Weight tolerance +/- .15lbs / .068kg
Black Desert Tan Coyote Tan
OD Green Foliage Navy
COLORS
NIJ 0106.01PASGT MULTI HITMIL-STD 662f
Riot Visor
STRIKER SERIES HELMET ACCESSORIES USA MADE
Inside view of ACH/MICH helmet with 7 pad system (size 6/8)
Opscore VAS shroud kit
Velcro Attachment
Rails and bungee kit
Ballistic Visor
Striker Helmet Bag
Striker 3 pt PASGT Harness
Striker 4 ptU.S. Harness
Striker 4 pt ACH Harness
Designed to fit our Striker ACH/MICH and PLT level IIIA ballistic helmets; all of our accessory helmet solutions are USA made and offer advanced protection and scalability for advanced operations requirements.
+ Options: Multiple options for harness setup + Adjustable: accessories for specific fit to our medium and large helmets + Warranty: 1 year on exterior cover material and workmanship
BLACK DESERT TAN COYOTE TAN
OD GREEN FOLIAGE NAVY
COLORSOVERVIEW
STRIKER SERIES HIGHCOM HELMET ACCESSORIES
HighCom’s advanced helmet configuration platform allows for the configuration of a unique and versatile rail attachment system which allows for the fast and effective attachment of secure headborne accessories such as audio, video, and lighting systems.
HighCom rail attachment is offered as an upgrade across it’s Striker line of advanced combat helmet systems and can be packaged with the low profile secure attachment shroud for NVG’s on the front mount of helmet platforms.
RAILS
HighCom's universal compatible shroud mount provides a secure attachment on the front of it's advanced combat helmet system for the addition of most NVGs, vid-eo, and illumination equipment. The multi point attachment provides a unique and powerful platform for critical equipment and mission ready deployment.
SHROUD
HighCom’ bungees provided as optional with the rails and shroud system provide
the needed support and stabilization for the NVG mount of choice.
BUNGEES
HighCom’s Velcro mount attachment is designed for incorporation when a rails and shroud application is required for allowing the addition of additional critical mission equipment including illumination accessories, communication, counterweights, and identification placards.
VELCRO
+ Team Wendy’s REVOLVE™ Helmet Liner is a 3-piece impact mitigating system designed to be a replacement liner for most ballistic shells.
+ REVOLVE™ meets and exceeds the latest ACH blunt impact requirements (AR/PD 10-02 Rev A, 08 May 2012).
+ Multiple impacts across all temperatures (14°F to 130°F) result in average head acceleration under 100G @ 10ft/sec, and under 180G @ 14ft/sec
The EPIC Air™ Combat Helmet Liner System takes protection to a whole new level. The design incorporates three main pads (front, rear and crown) for impact protection, an assortment of ergonomically designed comfort pads, and patent-pending Air Channeling™ technology to keep you cooler. EPIC Air™ also comes in a variety of cuts and sizes to fit any style of ground combat helmet and is compatible with all styles of communications headsets. The sizing for EPIC Air™ depends on your helmet cut.
REVOLVE™ HELMET LINER SYSTEM
The ¾-inch ZAP™ NSN System is the standard system authorized for all ground combat helmets. The set includes seven ZAP™ pads – 1 circular crown pad (NSN 8470-01-546-9415), 2 trapezoid pads (NSN 8470-01-546-9407), 4 oblong pads (NSN 8470-01-546-9356) – as well as an illustrated instruction manual. Velcro® hook disks not included. Also available in 1-inch pads.
EPIC™ (Enhanced Protection, Individual Comfort) consists of a one-piece protective impact liner, and 22 adjustable comfort pads provided in four shapes (oblong, trapezoid, tapered trapezoid, and triangle) and two thicknesses (3/16-inch “thin” and 3/8-inch “thick”). The comfort pad set also includes four Ultra Grip™ pads for added stability and two sweat bands for moisture absorption. EPIC™’s design offers a significant increase in protection at high-G impacts without adversely affecting weight or heat dissipation. EPIC™ employs the same Zorbium® foam proven through years of service in Team Wendy’s standard ZAP™ products and fits all standard ground combat helmets. The complete system includes an illustrated instruction manual included. Velcro® coins not included.
STRIKER SERIES TEAM WENDY HELMET ACCESSORIESUSA MADE
EPIC AIR™ COMBAT HELMET LINER SYSTEM
EPIC ™ COMBAT HELMET LINER SYSTEM
ORBIUM® ACTION PAD (ZAP™) NSN SYSTEM
STRIKER SERIES TEAM WENDY HELMET ACCESSORIESUSA MADE
The ZAP™ Airborne Pad is designed to be worn in addition to other ZAP™ sets and is placed at the nape of the helmet during airborne operations. The ZAP™ Airborne Pad weighs less than 3/4 of an ounce and provides significant additional impact protection to the vulner-able nape area of the skull by reducing peak G’s experienced during high-speed impacts. The ZAP™ Airborne Pad includes an illustrated instruction manual.
ZORBIUM® ACTION PAD (ZAP™) AIRBONE PAD
+ 18 Velcro hook disks for helmet pad installation
VELCRO HOOK DISKS
The ZAP™ SOF System is designed to accommodate communication headset integra-tion within ground combat helmets. The set includes eight ZAP™ pads comprising 2 trapezoid pads (NSN 8470-01-546-9407) and 6 oblong pads (NSN 8470-01-546-9356), and an illustrated instruction manual. Also available in 1-inch pads. Velcro® hook disks not included.
ZORBIUM® ACTION PAD (ZAP™) SOF SYSTEM
The new Team Wendy H-back chinstrap is our lightest retention offering, weighing below 100g (3.5oz) including ballistic mounting hardware. This system truly adheres to the KISS principle, with no unnecessary components, adjustments, or loose ends - while providing an extremely high level of comfort and stability The H-back utilizes our cam-lock sliders which allow for one handed adjustment and no-slip, positive-locking engagement.
CAM-BUCKLE H-BACK
The first stand-alone chinstrap to feature dial-adjustable fit. The Boa® Closure System pro-vides the ultimate in stability, adjustment and fit while remaining lightweight and dura-ble. Taking it one step further, the retention system is compatible with a wide variety of helmet liner systems as well as most common ballistic shell styles.
CAM FIT™ RETENTION SYSTEM
STRIKER SERIES TEAM WENDY HELMET ACCESSORIESUSA MADE
The Team Wendy Standard 4-point Chinstrap incorporates a soft anti-microbial fabric in the chin cup and the nape pad to prevent chafing and skin irritation. Attachment points are nylon reinforced and compatible with current standard issue ACH, LWH, and ECH hardware, as well as most other common tactical helmets. The chinstrap is constructed using 5/8-inch webbing with anti-chafe, anti-microbial sleeves, and meets all ACH, LWH, and ECH retention test performance requirements.
TEAM WENDY STANDARD CHINSTRAP
+ The chinstrap extender is compatible with Team Wendy’s CAM FIT Retention and Cam-Buckle H-Back Retention but not compatible with the Standard Chinstrap
+ Extends the chinstrap by 4” + Commonly used by Operators who need to extend the length of their chinstrap to accom-
modate a gas mask
CHINSTRAP EXTENDER
+ Designed and built by Wilcox for use with the Team Wendy EXFIL® tactical bump helmet + Low profile design mounts flush to the surface of the EXFIL® helmet, making it com-
pletely snag free for HALO, HAHO and static line operations + Standard 3-hole mounting pattern + Lightweight composite construction with insert machined from 6061-T6 aircraft alumi-
num billet to ensure solid and precise interface with NVG mounting arm + Compatible with many common non-aviation quick-detach-type NVG arms, includ-
ing: US Army Standard #A3256368, Wilcox® L4 G24 #28300G24, Wilcox® L4 G21M #28300G21M, Wilcox® L4 G25 #28300G25, Wilcox® L4 G29M #28300G29M, Wilcox® L4 G01 #56500G01, Wilcox® L4 G02 #56500G02, Norotos® INVG #1820010, Norotos® AKA2 #1840010
+ Also accepts helmet-borne accessories that use NVG-type mounts, such as the GoPro HD Hero camera (NVG mounting option sold separately) and PrincetonTec Remix illumi-nator
+ Black oxide coated stainless steel hardware; all hardware and Allen wrench are included
SHROUD
STRIKER SERIES OPSCORE HELMET ACCESSORIESUSA MADE
+ 3X more stable under rotational forces than standard issue system + Patented tabs provide one-handed adjustment while wearing the helmet + Straight force lines and unique design eliminate loose strap ends + Available in left-eye dominant (LED) configuration (buckle on right side) + The only chinstrap available in Tan that meets SOF DG2 IR specification + Airborne Certified for USSOCOM
+ 2X more stable under rotational forces than standard issue system + Patented tabs provide one-handed adjustment while wearing the helmet + Straight force lines and unique design eliminate loose strap ends + Available in left-eye dominant (LED) configuration (buckle on right side) + The only chinstrap available in Tan that meets SOF DG2 IR specification + Airborne Certified for USSOCOM
+ Fits ACH / MICH 2000 helmets and ACH / MICH 2002 Gunfighter Cut helmets + Does NOT fit ACH / MICH 2001 Special Forces Side Cut helmet, RBR helmets or any helmet that is
not a MICH style helmet with the exact mounting hole pattern + Lightweight, multi-impact, ventilated liner system with repositionable EPP impact pads and
LDV closed-cell comfort foam that is not affected by temperature, altitude, or moisture + Pads are pre-molded to the shape of a head - no more “flat” blocks + Occ-Dial adjustable fitband with replaceable leather front, nape, and side pads quickly detaches
to allow convenient donning and doffing of COMs headsets with internal top headbands + Integrated Head-Loc chinstrap retention system gives helmet 4x more stability than standard
issue ACH helmet suspension / retention + Easily installs using existing Velcro hook interior disks and chinstrap mounting holes
ACH OCC-DIAL LINER
ACH HEAD-LOC™ RENTENTION SYSTEM X-NAPE
+ Retrofits into the FAST Ballistic High Cut and Maritime Helmets and is available in two variations: with a low profile Worm-Dial fitband, or with the traditional H-Nape Head-Loc chinstrap.
+ Both systems utilize the same one-piece full coverage impact layer with modular pads. + Pads are durable, breathable and low absorbency + Designed for shockwave attenuation + Installs into FAST helmets using the existing Velcro pattern in the shells and comes in corre-
sponding helmet sizes (S/M, M/L, L/XL) + Easy battlefield replacement
LUX LINER KIT
ACH HEAD-LOC™ RENTENTION SYSTEM H-NAPE
+ New lighter weight design with more precise tolerances + Forged aluminum construction for greater strength and durability + Multiple bungee and lanyard mounting points for compatibility with visors + Fits all FAST, Sentry, ACH and ECH style helmets with the MARSOC / WARCOM 3-hole pattern
SKELETON SHROUD
+ Snag free for HALO, HAHO and static line operations + All aluminum construction with powder coated finish and stainless steel ballistic hard-
ware + Fits all ACH, MICH, PASGT and Lightweight Marine Helmets with the MARSOC / WARCOM
3-hole pattern + Fits all FAST Ballistic and FAST Carbon helmets + Includes a foam gasket to provide additional stabilization and eliminate any vibration
and wobble, better than competitor shrouds + Ideal for replacing the original helmet “hook and strap” mounting system + Can be used for mounting night vision devices (requires night vision mounting arm and
NVG goggles, not sold by Ops-Core) + It is the lightest, lowest profile, least obtrusive, and least expensive front shroud solution
currently available
VAS SHROUD
+ Strongest, lowest profile accessory mounting solution for helmets + Improved lower profile version of the 2007 design with added features for the attach-
ment of accessories + Includes lower dove-tail slot for support of O2 mask, goggle, and illuminator devices + Provides instant donning and doffing of mandible and face protection solutions for
the ACH + Compatible with a Single Strap O2 Kit as well as Double Strap O2 Kit + Snag free for HALO, HAHO and static line + Uses existing chinstrap mounting holes and is compatible with MSA and Ops-Core
chinstraps + Available with or without bungees
ACH-ARC KIT AND BUNGEES
STRIKER SERIES OPSCORE HELMET ACCESSORIESUSA MADE
+ Snapdragon buckle for quick release of O2 mask + Head-Loc Tabs for on-the-fly fit adjustment + Available in Tan, Foliage Green and Black + Requires Ops-Core 2010 ACH-ARC Kit mounted onto ACH Helmets + Snaps into the corner buckle receiver on the ACH-ARC rail
O2 SINGLE STRAP KIT (FOR 2010 ACH-ARC)
+ Snapdragon buckle for quick release of O2 mask + Head-Loc Tabs for on-the-fly fit adjustment to tighten or loosen the straps + Two attachment points to each side rail for extra security + Swivel clip pivots inside the shoe to allow proper strap height alignment to fit both O2
masks + Available in Tan, Foliage Green and Black + Requires Ops-Core 2010 ACH-ARC Kit mounted onto ACH Helmets + Easy attachment to the rail - swivel shoes slide into the upper and lower dovetails
O2 DOUBLE STRAP KIT (FOR 2010 ACH-ARC)
+ Snapdragon buckle for quick release of O2 mask
+ Head-Loc Tabs for on-the-fly fit adjustment + Available in Tan, Foliage Green and Black
+ Snapdragon buckle for quick release of O2 mask + Head-Loc” Tabs for on-the-fly fit adjustment to tighten or loosen the straps + Provides two attachment points to each side rail for extra security + Swivel clip pivots inside the shoe to allow proper strap height alignment to fit PHAOS and
PHANTOM masks + Available in Tan, Foliage Green and Black + Requires Ops-Core FAST Helmet with rails + Designed specifically for the FAST Helmet + Easy attachment - swivel shoes slide into the upper and lower dovetails of the FAST ARCs
O2 SINGLE STRAP KIT (FOR FAST HELMETS)
O2 DOUBLE STRAP KIT (FOR FAST HELMETS)
STRIKER SERIES OPSCORE HELMET ACCESSORIESUSA MADE
+ Requires Ops-Core FAST Helmet with rails
+ Snaps into the corner buckle receiver on the FAST ARCs
+ For use with Ops-Core Retention System and Gas Mask Extender when wearing a gas mask
+ Slides over the chincup or the Extender when they are worn under the chin + Soft fleece provides added comfort and prevents irritation
FLEECE CHINCUP
+ Works with the ACH-ARC Kit and the FAST Helmet rails + ACH-ARC Kit includes (2) Picatinnys, FAST Helmets include (1) Picatinny + Use it to mount a variety of headborne accessories to the helmet + Quickly attaches or releases from the rail system
PICATINNY ADAPTER
+ Works with the ACH-ARC Kit and the FAST Helmet rails + Use it as a base to mount a variety of headborne accessories to the helmet + Quickly attaches or releases from the rail system
WING-LOC ADAPTER
+ Works with the ACH-ARC Kit and the FAST Helmet rails + Adapts the Surefire X300 Tactical Weapon Light to your helmet + Quickly attaches or releases from the rail
SUREFIRE X300 ADAPTER
+ Compatible with Contour HD cameras + Quickly mounts onto FAST Helmet ARC Rails or ACH-ARC Kit + Attaches Contour HD Camera to your helmet with the lowest possible profile + Allows for rotation of the camera to the desired pitch with secure stabilization
SUREFIRE X300 ADAPTER
STRIKER SERIES OPSCORE HELMET ACCESSORIESUSA MADE
STRIKER SERIES OPSCORE HELMET ACCESSORIESUSA MADE
+ Works with the ACH-ARC Kit and the FAST Helmet rails + Use it to mount lights and cameras to the helmet (ie. VIO POV1 Camera or Surefire E1L Light) + Quickly attaches or releases from the rail system
SINGLE CLAMP
+ Customizable weight management system with (5) 70g removable weights and (5) elastic pock-ets
+ Total weight of the system is 0.85lbs (385g) + Elastic pockets can stretch to fit (2) weights or (1) weight and (1) battery (AA, AAA or 123) + Mounts to the rear of the helmet with custom anchors using the existing helmet holes with
longer ballistic screws (provided) + Anchors remain on the helmet while the counterweight can be removed quickly and reattached
as needed + Rear Velcro attachment ensures secure positioning + Features a Chemlight window and Velcro patch for Glint tape for use with low light IFF
COUNTERWEIGHT KIT
+ Works with the ACH-ARC Kit and the FAST Helmet rails to quickly and easily attach goggles to the helmet
+ Compatible with most tactical goggles (36mm strap width and 19mm strap width) + Provides rotational freedom of motion, without the hassle of hook and loop style attach-
ment + The clips can be mounted to upper or lower dovetails to provide instant and secure attach-
ment of straps, while allowing full rotational range + The shoe can remain in the dovetail once the goggles are removed
GOGGLE SWIVEL CLIPS (36MM OR 19MM)
CBRN Mask Extender can be used with all Head-Loc™ Retention Systems. It adds 3.5” to the chinstrap, allowing it to fasten over the CBRN mask. The extender is simply at-tached and removed with one click of the buckle.
CBRN MASK EXTENDER
STRIKER SERIES PAULSON FACE SHIELDS
RIOT FACE SHIELD: MODEL DK7-X.250AFUniversal anti-fog coated face shield system that adapts to most helmets. Designed to fit ACH, MICH, and PASGT style military helmets. Shield locks into the stowed or deployed positions and can be released with one hand. Pivot and lock assembly can be transferred to right or left of the shield for individual preference. Shield length is 6 inches. Shield thickness is .250 inches.
+ Material: Polycarbonate + Color: Clear + Product Weight: 1.90 lb. + Specification: NIJ 0104.02 MIL-V-43511C, V-50 rated
Universal face shield system that adapts to most helmets. Designed to fit ACH, MICH, and PASGT style military helmets. Shield locks into the stowed or deployed positions and can be released with one hand. Pivot and lock assembly can be transferred to right or left of the shield for individual preference. Shield length is 6 inches. Shield thickness is .250 inches.
+ Material: Polycarbonate + Color: Clear + Product Weight: 1.90 lb. + Specification: NIJ 0104.02 MIL-V-43511C, V-50 rated
RIOT FACE SHIELD: MODEL DK7-X.250
RIOT FACE SHIELD: DK6X.250AF-NUniversal anti-fog and hard coated face shield system that adapts to most helmets. De-signed to fit ACH, MICH, and PASGT style military helmets. Integral rubber seal provides a liquid barrier at the helmet/shield interface. Shield locks into the stowed or deployed positions and can be released with one hand. Pivot and lock assembly can be trans-ferred to right or left of the shield for individual preference. Shield length is 8 inches. Shield thickness is .250 inches.
+ Material: Polycarbonate + Color: Clear + Product Weight: 1.55 lb. + Specification: MIL-STD-662F, MIL-P-46593A
STRIKER SERIES PAULSON FACE SHIELDS
RIOT FACE SHIELD: DK6X.250AFUniversal anti-fog and hard coated face shield system that adapts to most helmets. De-signed to fit ACH, MICH, and PASGT style military helmets. Integral rubber seal provides a liquid barrier at the helmet/shield interface. Shield locks into the stowed or deployed positions and can be released with one hand. Pivot and lock assembly can be trans-ferred to right or left of the shield for individual preference. Shield length is 8 inches. Shield thickness is .250 inches.
+ Material: Polycarbonate + Color: Clear + Product Weight: 1.55 lb. + Specification: NIJ 0104.02, MIL-V-43511C, NATO 841.501.552.7134, V-50 rated
RIOT FACE SHIELD: DK6-X.250AFSUniversal anti-fog and hard coated face shield system that adapts to most helmets. De-signed to fit ACH, MICH, and PASGT style military helmets. Integral rubber seal provides a liquid barrier at the helmet/shield interface. Shield locks into the stowed or deployed positions and can be released with one hand. Pivot and lock assembly can be trans-ferred to right or left of the shield for individual preference. Shield length is 6 inches to accommodate use of NBC cartridge on a gas mask. Shield thickness is .250 inches.
+ Material: Polycarbonate + Color: Clear + Product Weight: 1.30 lb. + Specification: NIJ 0104.02, MIL-V-43511C, V-50
RIOT FACE SHIELD: DK6-X.250Universal face shield system that adapts to most helmets. Designed to fit ACH, MICH, and PASGT style military helmets. Integral rubber seal provides a liquid barrier at the helmet/shield interface. Shield locks into the stowed or deployed positions and can be released with one hand. Pivot and lock assembly can be transferred to right or left of the shield for individual preference. Shield length is 8 inches. Shield thickness is .250 inches.
+ Material: Polycarbonate + Color: Clear + Product Weight: 1.30 lb. + Specification: NIJ 0104.02, MIL-V-43511C, V-50
STRIKER SERIES PAULSON FACE SHIELDS
RIOT FACE SHIELD: DK6-H.150Universal face shield system that adapts to most helmets. Designed to fit ACH, MICH, and PASGT style military helmets. Integral rubber seal provides a liquid barrier at the helmet/shield interface. Shield locks into the stowed or deployed positions and can be released with one hand. Pivot and lock assembly can be transferred to right or left of the shield for individual preference. Shield length is 8 inches. Shield thickness is .150 inches.
+ Material: Polycarbonate + Color: Clear + Product Weight: 1.45 lb. + Specification: NIJ 0104.02, MIL-V-43511C
RIOT FACE SHIELD: DK6-H.150SUniversal face shield system that adapts to most helmets. Designed to fit ACH, MICH, and PASGT style military helmets. Integral rubber seal provides a liquid barrier at the helmet/shield interface. Shield locks into the stowed or deployed positions and can be released with one hand. Pivot and lock assembly can be transferred to right or left of the shield for individual preference. Shield length is 6 inches to accommodate use of NBC cartridge on a gas mask. Shield thickness is .150 inches.
+ Material: Polycarbonate + Color: Clear + Product Weight: 1.45 lb. + Specification: NIJ 0104.02, MIL-V-43511C
RIOT FACE SHIELD: DK5-H.150Universal face shield system that adapts to many helmets to provide face protection in riot conditions. Integral rubber seal provides a liquid barrier at the helmet/shield interface. Shield locks into the stowed or deployed positions and can be released with one hand. Pivot and lock assembly can be transferred to right or left of the shield for individual preference. Shield length is 8 inches. Shield thickness is .150 inches.
+ Material: Polycarbonate + Color: Clear + Product Weight: 1.06 lb. + Specification: NIJ 0104.02, MIL-V-43511C, NSN # 4240-01-430-1983, NATO # 841-
501-514-8851
STRIKER SERIES PAULSON FACE SHIELDS
RIOT FACE SHIELD: DK5-H.150 ShortUniversal face shield system that adapts to many helmets to provide face protection in riot conditions. Integral rubber seal provides a liquid barrier at the helmet/shield interface. Shield locks into the stowed or deployed positions and can be released with one hand. Pivot and lock assembly can be transferred to right or left of the shield for individual preference. Shield length is 6 inches to accommodate use of NBC cartridge on a gas mask. Shield thickness is .150 inches.
+ Material: Polycarbonate + Color: Clear + Product Weight: 1.10 lb. + Specification: NIJ 0104.02, MIL-V-43511C, NSN # 4240-01-430-1983, NATO # 841-
501-514-8851
RIOT FACE SHIELD: DK5-X.250Universal face shield system that adapts to many helmets to provide face protection in riot conditions. Integral rubber seal provides a liquid barrier at the helmet/shield interface. Shield locks into the stowed or deployed positions and can be released with one hand. Pivot and lock assembly can be transferred to right or left of the shield for individual preference. Shield length is 8 inches. Shield thickness is .250 inches.
+ Material: Polycarbonate + Color: Clear + Product Weight: 1.90 lb. + Specification: NIJ 0104.02, MIL-V-43511C, NSN # 8470-01-467-0754, NATO # 841-
501-514-8855, V-50 rated
RIOT FACE SHIELD: DK5-X.250 ShortUniversal face shield system that adapts to many helmets to provide face protection in riot conditions. Integral rubber seal provides a liquid barrier at the helmet/shield interface. Shield locks into the stowed or deployed positions and can be released with one hand. Pivot and lock assembly can be transferred to right or left of the shield for individual preference. Shield length is 6 inches to accommodate use of NBC cartridge on a gas mask. Shield thickness is .150 inches
+ Material: Polycarbonate + Color: Clear + Product Weight: 1.10 lb. + Specification: NIJ 0104.02, MIL-V-43511C, NSN # 4240-01-430-1983, NATO # 841-
501-514-8851
STRIKER SERIES PAULSON FACE SHIELDS
RIOT FACE SHIELD: DK5-X.250AFUniversal anti-fog and hard coated face shield system that adapts to many helmets to provide face protection in riot conditions. Integral rubber seal provides a liquid barrier at the helmet/shield interface. Shield locks into the stowed or deployed positions and can be released with one hand. Pivot and lock assembly can be transferred to right or left of the shield for individual preference. Shield length is 8 inches. Shield thickness is .250 inches.
+ Material: Polycarbonate + Color: Clear + Product Weight: 1.90 lb. + Specification: NIJ 0104.02, MIL-V-43511C, NSN 8415-01-514-8856, V-50 rated
RIOT FACE SHIELD: DK5-H.150HM“Hard Mount” face shield system designed to attach to military PASGT helmets. Integral rubber seal provides a liquid barrier at the helmet/shield interface. Shield locks into the stowed or deployed positions and can be released with one hand. Pivot and lock assembly can be transferred to right or left of the shield for individual preference. Shield thickness is .150
+ Material: Polycarbonate + Color: Clear + Product Weight: 1.90 lb. + Specification: NIJ 0104.02, MIL-V-43511C, NATO # 841-501-514-8857
RIOT FACE SHIELD: DK5-X.250HM“Hard Mount” face shield system designed to attach to military PASGT helmets. Integral rubber seal provides a liquid barrier at the helmet/shield interface. Shield locks into the stowed or deployed positions and can be released with one hand. Pivot and lock assembly can be transferred to right or left of the shield for individual preference. Shield thickness is .250inches.
+ Material: Polycarbonate + Color: Clear + Product Weight: 1.90 lb. + Specification: NIJ 0104.02, MIL-V-43511C, NATO # 841-501-514-8857, V-50 rated