product sheet - tekni-plex
TRANSCRIPT
Product Sheet Barrier Films for Pharmaceutical Packaging
Flexapharm® LaminatedPVC / PE
Flexapharm® Laminated
PVC PE
Review date 5 May 2016
Tekni-Films USA1445 Timberwolf DriveHolland, OH 43528 • USATel : +1 908 566 1127E-mail: [email protected]
Tekni-Plex Gallazzi SrlVia S. Allende 621049 Tradate (VA) • ItalyTel : +39 0331 815 211E-mail: [email protected]
Tekni-Films EuropeIndustrielaan, 379320 Erembodegem • BelgiumTel : +32 53 650 711E-mail: [email protected]
Tekni-Films South AmericaTimoteo Gordillo 54901439 Buenos Aires • ArgentinaTel : +54 11 4605 4042E-mail: [email protected]
Disclaimer: The information set forth in this brochure is subject to change without notice and must be confirmed at time of purchase. Tekni-Plex makes no warranty, express or implied, with respect to this information and disclaims all liability from reliance on it. Tekni-Plex specifically disclaims all other warranties, express or implied, with respect to the products, including, but not limited to, warranties of merchantability and fitness for a particular purpose. Nothing herein shall constitute or imply any promise to enter into a legally valid relationship.
Aclar® is a Honeywell registered trademark • Flexapharm® is a Tekni-Plex Gallazzi registered trademark Tekniflex® is a Tekni-Plex registered trademark • Teknilid™ is a Tekni-Plex trademark • TekniMD™ is a Tekni-Plex trademark
EUFL1731
Chemical-Physical Properties
Flexapharm® PVC thickness
(μm)
PE thickness
(μm)
WVTR (g/m2/d)
38°C, 90% RH ASTM F1249
OTR (cm3/m2/d)
23°C, 0% RH ASTM D3985
NS6 L 100µ ~ 120µ 27µ ~ 40µ 4.50* 25.00*
NS1 L 150µ ~ 500µ 40µ ~ 50µ 2.30** 12.00**
* Figures for PVC thickness of 100 μm ** Figures for PVC thickness of 250 μm
Product Sheet Barrier Films for Pharmaceutical Packaging
Flexapharm® LaminatedPVC / PE
GRADE DESCRIPTION AND APPLICATION
Flexapharm® NS6 L Calendered PVC film laminated to PE, suitable for production of suppository blisters, easily sealable at low temperature
Flexapharm® NS1 L Calendered PVC film laminated to PE suitable for production of monodoses