product repair range
DESCRIPTION
repair productsTRANSCRIPT
2 Sales 01525 382713 • Email: [email protected] • Web: www.autoinparts.com
The E-Tech Vehicle Repair and Restoration Range
The damage caused to most vehicles is from the hazards of modern day motoring: parking in tight spaces, high kerbs, larger vehicles, and general wear and tear that comes from increased traffic volumes.
The damage usually affects door mirrors, wheel arches, bumpers and the lower and middle side bodywork and can be categorised mainly as scuffs, scratches and small dents. The traditional approach to repairing this would be to go to a body shop or contact your local mobile franchise repair man.
This approach will be expensive as labour costs make up the biggest cost of any repair or restoration work. If you consider making an insurance claim you know this will increase your renewal fee and affect your no claim status. So if your vehicle suffers any minor damage to body, bumper or paintwork and you repair it yourself you will save a considerable amount of money. The repairing procedure is quite straightforward however it is cloaked in “trade talk/jargon” that most people don’t understand and are intimidated by.
Our Vehicle Repair & Restoration product range has been devloped to provide an effective and economic solution to repairing typical vehicle damage as mentioned above.
If you are prepared to put in a bit of
TECHNIK SURFACE
DEEP CLEANER
400ml Part No: ER00102
TECHNIK REPAIRED SURFACE PRIMER
500ml Part No: ER00109
TECHNIK 2 in 1 FILLER
& PRIMER 400ml
Part No: ER00108
TECHNIK PLASTIC
PRE-PRIMER 400ml
Part No: ER00110
TECHNIK RUST
PREVENTER 500ml
Part No: ER00111
TECHNIK SELF-ETCH PRIMER
400ml Part No: ER00112
The first job with any repair is to clean the damaged area
thoroughly. This product is
made for this and does it perfectly.
Specially developed for
priming repaired, restored and
filled surfaces. Excellent
coverage and adhesion.
Fills minor scuffs and
scratches and also primes the surface so it is ready for the top coat of
paint.
Prepares all plastic surfaces
for priming and painting.
Ensures a strong foundation for primer and top coat of paint.
Stops rust on exposed and
exterior metal & steel surfaces by creating an impenetrable
barrier against moisture.
Specially developed to
allow notoriously difficult surfaces
to be painted such as:
aluminium, stainless steel, bare metals etc
time and effort a saving of up to about 80% can be achieved which will both improve your vehicle’s appearance and increase its resale value.
The fillers are easy to apply, sand and paint and are supplied in retail packaging for maximum impact and come with detailed instructions that are simple and straightforward to follow.
Manufactured in Germany using the latest polymer, polyester and adhesion technology, this high quality range of professional body shop grade fillers and preparation paints and sprays has been specially developed for DIY use so that with a bit of time and effort you can achieve a perfect repair.
ULTRA FINE SURFACE DETAILING
FILLER 250g Part No: ESF00107 (no hardener required)
Ideal for minor bodywork dents, shallow scuffs and
scratches.The perfect finishing layer for an ultra smooth finish.
PLASTIC BUMPER & TRIM REPAIR
PUTTY 250g Part No: ER00101
(242g putty/8g hardener)
The perfect solution for cracked, split and holed
plastic bumpers and trim.Excellent adhesion.
Easy to sand and shape.
ADVANCED BODY FILLER
500g Part No: ER00103 (488g filler/12g hardener) 1000g Part No: ER00104 (975g filler/25g hardener)
Specially developed for use on both modern day vehicle
body panels as well as traditional steel ones.
Ideal for filling & repairing dents, gouges, splits and scratches in body work.
ULTRA LIGHT FILLER
420g Part No: ER00106 (408g filler/12g hardener)
Half the weight and just as strong as conventional
fillers.For use where weight reduction is required: motorsport, marine,
cycling, modelling etc.
FIBRE REINFORCED HOLE BRIDGING
FILLER 362g Part No: ER00105
(350g filler/12g hardener)
Gives structural strength to any repair. Ideal for filling and bridging holes, splits & cracks and for repairing
rust damaged areas.
The amount of damage generally increases with the age of the vehicle.
Statistics claim 1 in 7 cars has sustained minor to medium bodywork damage
REPAIR&RESTORATIONRESTORATION
Sales 01525 382713 • Email: [email protected] • Web: www.autoinparts.com 3Sales 01525 382713 • Email: [email protected] • Web: www.autoinparts.com
Typical Vehicle Damage:
REPAIRING A SCRATCH OR SCUFF
REPAIRING A DENT, DEEP SCRATCH OR CREASE IN BODY WORK
REPAIRING A HOLE IN A BODY PANEL - Caused by accident or rust
REPAIRING HOLED OR CRACKED PLASTIC BUMPER
Check the depth of the scratch - If it is under 3mm (3000 microns) deep see the below steps of how to repair and which products to use: If it is deeper than 3mm - SEEStep 1 Clean the surface with Technik Surface Deep Cleaner Part No:ER00102Step 2 Fill the scratch or scuff using either of the following products A or B: A Ultra Fine Surface Detailing Filler Part No: ER00107 - the ideal finishing layer for an ultra smooth finish and then use Technik Repaired Surface Primer Part No: ER00109 to prime the filled area ready for the top coat of paint. B 2 in 1 Filler & Primer Part No: ER00108 - use to fill and prime a scratch or scuff under 0.5mm (500 microns) deep. Apply several coats/layers. When filled apply the top coat of paint. Step 3 Top coat of paint - SEE PAGE 9
Step 1 Clean the surface with Technik Surface Deep Cleaner Part No: ER00102Step 2 Bridge and fill the hole with Fibre Reinforced Hole Bridging Filler Part No: ER00105Step 3 Then for a smooth finish cover the Fibre Reinforced Filler using the Advanced Body Filler Part No: ER00103 or Part No: ER00104. If weight reduction is important use the Ultra Light Filler Part No: ER00106 which is specially developed for use where weight reduction is preferred. Optional: As a final top layer and for an exceptionally smooth supercar finish use the Ultra Fine Surface Detailing Filler Part No: ER00107 Step 4 Spray over the filled area with Technik Repaired Surface Primer Part No: ER00109 before applying the top coat of paint.Step 5 Top coat of paint - SEE PAGE 9
Step 1 Clean the surface with Technik Surface Deep Cleaner Part No: ER00102 Step 2 Fill the damaged area using Advanced Body Filler Part No: ER00103 or Part No: ER00104. If weight reduction is important use the Ultra Light Filler Part No: ER00106 which is specially developed for use where weight reduction is required. Optional: As a final top layer and for an exceptionally smooth supercar finish use the Ultra Fine Surface Detailing Filler Part No: ER00107 Step 3 Spray over the filled area with Technik Repaired Surface Primer Part No: ER00109 before applying the top coat of paint.Step 4 Top coat of paint - SEE PAGE 9
Step 1 Clean the surface with Technik Surface Deep Cleaner Part No: ER00102Step 2 Bridge the hole or crack from behind using Fibre Reinforced Hole Bridging Filler Part No: ER00105Step 3 Fill the damaged area from the front using Plastic Bumper & Trim Repair Putty Part No: ER00101Step 4 Use the Technik Plastic Pre-primer Part No: ER00110 over the filled surface prior to painting for maximum paint adhesion.Step 5 Spray over the plastic pre- primer with Technik Repaired Surface Primer Part No: ER00109 before applying the top coat of paint.Step 6 Top coat of paint - SEE PAGE 9
3
1
3
2
4
REPAIR&RESTORATIONRESTORATION
Repair & Restoration Product Range
Part number Description ER00103 Advanced Body Filler - 500g (488g Filler/12g Hardener, Instructions and Applicator) ER00104 Advanced Body Filler - 1000g (975g Filler/25g Hardener, Instructions and Applicator)
• Excellent adhesion to bodywork• Easy to sand and shape• When sanded leaves a smooth finish for priming and painting• New pre-accelerated formula - fast setting• Impact resistant with good flexibility• Polyester based filler• Waterproof and includes anti-rust properties• Suitable for professional paint shop oven - heat resistant up to 120°C• Can be used as a general purpose filler on steel or alloy bodywork, rigid plastics, glass fibre (GRP), wood and masonry
• Suitable for filling and repairing dents, gouges, splits and scratches with a depth of up to 30mm.• Specially developed for use on both modern day vehicle body panels as well as traditional steel ones.
ANTI-RUST
FORMULA
DAMAGED AND DENTED BODYWORK
ADVANCED FILLER APPLIED DIRECTLY
INTO DAMAGED/DENTED AREA
Advanced Body Filler
DENTED BODY PANEL DENT PREPARED
DENT FILLEDFILLER SANDED READY FOR PRIMING
1
3
2
4
4 EASY STEPS:
ADVANCED BODY FILLER CAN BE USED ON ALL TYPES OF VEHICLES:
Cult Vehicles Retro Cars Family Cars Motorsport Performance and Kit Cars Classic Cars
ADVANCED
T E C H N O L O G Y
Part number Description ER00106 Ultra Light Filler - 420g (408g Filler/12g Hardener)
• Very versatile, can be used like any other filler, but offers great weight saving gains• Excellent adhesion, fast drying and easy to sand and shape• Waterproof and includes anti-rust properties• Ideal for applications that are exposed to high friction or vibrations. • Will resist temperatures up to 180°C• When sanded leaves an ultra smooth finish ready for priming & painting• Polyester based filler• Ideal for use on metal or alloy bodywork, rigid plastic, glass fibre (GRP), wood and masonry
• Specially developed for use where weight reduction is required: motorsport, marine, cycling, modelling etc.• Half the weight and just as strong as conventional fillers• Produced using a unique low density formula so it is about 50% lighter
SUITABLE FOR: Motorsport • Modelling • Motorbikes • Marine • Kit Cars etc
Ultra Light Filler
Supplied with detailed instructions, hardener and spreader
All types of motorsport
Modelling and Design Motorbikes Boating
and MarinePerformance and Kit Cars
Model Cars and Planes
50%LIGHTER
4 Sales 01525 382713 • Email: [email protected] • Web: www.autoinparts.com
ENGINEERED
IN GERMANY
ENGINEERED
IN GERMANY
REPAIR&RESTORATIONRESTORATION
Part number Description ER00107 Ultra Fine Surface Detailing Filler - 250g
• The perfect finishing layer for an ultra smooth finish• Air dries - no hardener required
• Ideal for minor bodywork dents, shallow scuffs and scratches.• Can be applied directly into the damaged area and will fill up to a depth of 3mm - 3000 microns(µ)• New Nano Polymer technology creates an ultra smooth finish leaving no air bubbles and ready for priming and painting.• Easy to sand and shape leaving no swirl marks or pin holes.• Excellent adhesion to bodywork and other fillers.• Can be used on metal or alloy panels, rigid plastics, GRP (Glass Fibre) and is the perfect finishing layer to any other body filler.
Ultra Fine Surface Detailing Filler
ENGINEERED
IN GERMANY
Supercar Surface Finish
ULTIMATE
F I L L E RSupplied with detailed Instructions and Spreader
Repair & Restoration Product Range
Part number Description ER00105 Fibre Reinforced Hole Bridging Filler - 362g
• Developed for filling and bridging holes, splits & cracks in body panels & bumpers. • Ideal for repairing rust damaged areas: rusted wings, rust bubbles, wheel and door edges etc
• Gives structural strength to any repair• Ultra strong adhesion to bodywork• Impact resistant, fast setting and waterproof• Provides a secure platform to build up layers of body filler for a smooth surface finish• Perfect for filling rust damage areas and rust spots• Can be used on steel or alloy body panels, plastic bumpers and glass fibre (GRP)
Great for repairing and reinforcing rusted wheel arches exposed edges, holed bodywork etc
ADVANCED FILLER APPLIED OVER THE TOP OF FIBRE REINFORCED FILLER SO IT CAN BE SANDED TO A
SMOOTH FINISH READY FOR PRIMING & PAINTING
DAMAGED AND DENTED BODYWORK
FIBRE REINFORCED FILLER PROVIDES
STRUCTURAL SUPPORT
Fibre Reinforced Hole Bridging Filler
ENGINEERED
IN GERMANY
A
DVANCED
T E C H N O L O G Y
362g pot - 350g Filler/12g Hardener, Instructions and Applicator supplied
Holed Panels
Rusted Wheel Arch Rust Holes
Part number Description ER00101 Plastic Bumper and Trim Repair Putty - 250g (242g putty/8g hardener)
The perfect repair solution for cracked, split and holed plastic bumpers and trim.
Ideal for cracked, holed or split front and rear bumpers
NANO
T E C H N O L O GY
• Excellent adhesion to original bumper• Ultra fine formula eliminates air bubbles and provides a smooth finish• Easy to sand and shape to original bumper contours• Can be painted• Simple and easy to use and apply• Good flexibility and fast setting• Can be used on all types of plastic bumpers, wheel arches and most other automotive plastic trim parts
Plastic Bumper and Trim Repair Putty
ENGINEERED
IN GERMANY
Supplied with detailed Instructions, Hardener and Spreader
5Sales 01525 382713 • Email: [email protected] • Web: www.autoinparts.com
REPAIR&RESTORATIONRESTORATION
PRIMED AND READY FOR
PAINTING
6 Sales 01525 382713 • Email: [email protected] • Web: www.autoinparts.com
Repair & Restoration Product Range
• Perfect for filled and sanded surfaces• Ideal for smoothing out textured or rough surfaces• The ‘High build’ nature of this product and easy sanding provide great surface levelling properties• Excellent foundation for the top coat of paint• Can be used on most painted or unpainted metal surfaces, rigid plastics, GRP (Glass Fibre), wood and masonry
PAINT
BODYWORKPRIMER
DAMAGED AREA
DAMAGED AREA BEING FILLED AND
PRIMED
Part number Description ER00108 Technik 2 in 1 Filler & Primer - 400ml
Technik 2 in 1 Filler & Primer
ENGINEERED
IN GERMANYFills minor scuffs, scratches and surface imperfections up to 500 microns (µ), 0.5mm / ½mm while at the same time primes the surface so it is ready to accept the top coat of paint
Ideal for minor scuffs and scratches
Damaged area filled, primed and ready for painting
Use to a max depth of 500 microns (µ)
0.5mm • ½mm
A
DVANCED
T E C H N O L O GY
Part number Description ER00109 Technik Repaired Surface Primer - 500ml
Technik Repaired Surface Primer
Specially developed for repaired, restored and filled surfaces
• Excellent adhesion qualities for all types of filler• Provides a firm foundation for the top coat of paint• Good flexibility and can be used on semi-rigid surfaces like plastic bumpers• Quick drying with great coverage• Can be used on fillers & putties, metal surfaces (painted or unpainted), most plastics, GRP (Glass Fibre), masonry & wood
Professional paint and body shop application
Wide range of applications including: refurbishing
alloy wheels and bumper repairs
PRIMED AREA
ENGINEERED
IN GERMANY
AFTER PRIMING
BEFORE PRIMING
Flattens out uneven
textured surfaces
ANTI CORROSION
FORMULA
ANTI CORROSION
FORMULA
ADVANCED
T E C H N O L O GY
Ideal for rigid or flexible bumpers
1
2
3
PRIMED
TOP COATDEEP CLEANED AND PLASTIC PRE-PRIMED
REPAIR&RESTORATIONRESTORATION
7Sales 01525 382713 • Email: [email protected] • Web: www.autoinparts.com
Part number Description ER00102 Technik Surface Deep Cleaner - 400ml
Technik Surface Deep Cleaner
• Quickly and effectively removes all traces of polish, wax, silicone, oil, grease, tar, insects & adhesive residue• Developed to enhance the adhesion of fillers, primers and the top coat of paint• Safe to use on painted surfaces• Used by professional car valeting companies for a really effective surface deep clean
ADVANCED
T E C H N O L O G Y
Safe to use on carbon and composite surfaces
Repair & Restoration Product Range
TOP COAT OF PAINT
PRIMER
PLASTIC PRE-PRIMER APPLIED
1
2
3
Specially developed to prepare all plastic surfaces for priming and painting
• Ideal for use on flexible & rigid plastics• Seals plastic surfaces and ensures a strong foundation for the primer and top coat of paint• Fast drying with advanced paint adhesion promoter• Increases the chip resistance of top coat of paint• Specially developed by professional paint and body shops for DIY use
Technik Plastic Transparent Pre-Primer
ENGINEERED
IN GERMANY
Perfect for flexible plastic bumpers
Part number Description ER00110 Technik Plastic Pre-Primer - 400ml
Ideal for preparing plastic trim: vents, grilles, fog lamp housings etc, prior to painting
PLASTIC CHAIRS
WHEELIE BINS
GREAT STYLING
UPGRADE
Ideal for fine detail cleaning
Ideal for deep cleaning damaged & repaired areas
before priming and painting
Vents Grilles
Fog Lamp Housing - before and after
QUICK &EFFECTIVE
DEEP CLEAN
Specially developed by Professional Paint & Bodyshops for DIY useIf you are performing any repair or restoration work to your vehicle, or sticking anything to it, the first step is to clean the surface you are going to be working on properly. Our Surface Deep Cleaner is the perfect product for this job.
ENGINEERED
IN GERMANY
MAKES PAINTING
PLASTIC SIMPLE Ideal preparation for most
plastics before painting
REPAIR&RESTORATIONRESTORATION
Repair & Restoration Product Range
• Enriched zinc particles electro-chemically bond to the surface creating an impenetrable barrier against atmospheric moisture• Perfect for vehicle repair and restoration where preventing corrosion is a priority• Resistant to moisture, UV rays, road salt, oil, extreme weather conditions and temperstures up to 350°C• Suitable for coating and touching up galvanised surfaces• Prevents corrosion between spot welds• Once applied maintains excellent welding conductivityPart number Description
ER00111 Technik Rust Preventer - 500ml
Technik Rust Preventer
ENGINEERED
TO PERFORMProtects exposed and exterior metal & steel surfaces from rust and corrosion
For brackets, parts, components etc
Technik Self-Etch Primer
Specially developed to allow notoriously difficult surfaces to be painted such as:
ENGINEERED
TO PERFORM
ETCHES & PRIMES
IN ONE STEP
EASY TO APPLY
AND FAST DRYING
Rust protection for bodywork and panels
Construction and Industrial applications
Protection for vehicle chassis and sub-frames
ADVANCED
T E C H N O L O G Y
Part number Description ER00112 Technik Self-Etch Primer - 400ml
For alloy wheel refurbishments & alloy surfaces
For machined or polished steel
surfaces
Engineering and industrial
applications For glass fibre and composite surfaces
• Chemically etches the surface creating a firm foundation for primer and paint• Microscopically impregnates the first few microns of the surface promoting excellent primer and paint adhesion• Ideal for restoration and refurbishment of alloy wheels
• Aluminium • Stainless Steel • Galvanised, treated or untreated steel• Bare Metals • Fibre Glass
When spread on to a surface a chemical process starts and the acid content impregnates the top layer of the surface and provides a firm foundation.Compatible with virtually any primer or top coat of paint.
ADVANCED
T E C H N O L O GY
8 Sales 01525 382713 • Email: [email protected] • Web: www.autoinparts.com
REPAIR&RESTORATIONRESTORATION
9Sales 01525 382713 • Email: [email protected] • Web: www.autoinparts.com
Repair & Restoration Accessories
The same hardener is suitable for all E-Tech Fillers.Part number Description ER-H12G 12g ER-H25G 25g ER-H50G 50g
Additional Tubes of Hardener for E-Tech Body Fillers
Part number Description ER-FILES Diamond File Set - 5 piece
5 Piece Diamond File Set
Part number Description ER-GLOVESX10 10 pairs of Disposable Gloves
10 Pairs of Disposable Gloves
Part number Description ER-CSACHETX10 10 Surface Cleaning Sachets ER-CSACHETX25 25 Surface Cleaning Sachets ER-CSACHETX100 100 Surface Cleaning Sachets
Surface Cleaning Sachets
3 sheets of abrasive paper - fine, medium and coarse.
Part number Description ERA/PAPER One sheet of each: Sheet size: 230x280mm - Fine and Medium Sheet size: 115x280mm - Coarse
Abrasive Paper Pack
Set of 3 applicators/spreaders for use when applying body fillers or putties.Size: 75mmx 95mm
Part number Description ER/SPRD 3 Applicators/Spreaders
Applicators/Spreaders
COARSE
FINE
MEDIUM
Set of 10 wooden sticks for use when mixing fillers & hardeners.Part number Description ER-MIX Pack of 10 mixing sticks
Mixing Sticks
Ideal for cleaning in small spaces or recesses, particularly air vents and grilles.Shaped foam swab on a 140mm stick. Supplied in packs of 10Part number Description AIL669 Foam Detail Cleaning Swabs Pack of 10
Foam Detail Cleaning Swabs
TOP COAT OF PAINTThe manufacturer’s colour code for your vehicle will be on the VIN plate/chassis plate (refer to vehicle owner’s hand book to locate this information) or you could ask your local dealer for your paint colour code. Contact a good local motor factor who mixes paint on their premises and they will be able to provide you the exact colour match in an aerosol for DIY application (use).
REPAIR&RESTORATIONRESTORATION