product presentation - · pdf filebefore a module thrives to product-ripe, it ... hanging...

product presentation

2015

VAROLAB made Systems Solution for the In-Vitro-Fertilisation

Varolab Chronology Varolab is in 1989 under the Company name “Zapf Instruments” opened under direction of Werner ZAPF. The son, his name Stephan over the management in 2003 and adopted the new name “VAROLAB”. We are the world and pursue a mission statement:

“QUALITY HAS A NAME… VAROLAB” Quality factor: Technical innovation The high technological standards in equipment and expansion capabilities of our laboratory systems, we owe decades of striving for continual improvement. Before a module thrives to product-ripe, it has along with all required legal, technical and medical standardizations and significantly exceeded. Varolab - our motivation is progress Quality factor: Precision and longevity In the manufacturing process through each module more than once all the necessary quality assurance tests, before we send our products with a clear conscience to travel to them. Through this ambitious own in mind, we have ensured that our Service Department in our company. Complaints have rarity value in real Varolab. Varolab – our drive is uncompromising quality ones Quality factor: Ergonomics Because our products are exceptionally durable due to the high quality standards, we want them to appreciate the ergonomic advantages also has years away. Because that a laboratory unit of Varolab longer with them is on duty when, as their staff is very high. Therefore is important to us that we think from the beginning always one step further. Varolab – our steps away is a step better with each to be Our inspiring For more than 20 years, we guarantee continued through constant development of our products provide maximum ergonomics, precision and durability, the best foundation for your investments. Unit for unit can be custom made in our workshops according to their individual requirements with the highest precision. It sounds like a paradox, but we refer to this as “high-end manufactory” Varolab – our incentive is your satisfaction conclusion If they did, then equal to the best. Varolab Made in Germany

Varolab all products are supplied with a Certificate of


Varolab is a German company, which focuses on the construction and the conversion of IVF laboratory equipment. We manufacture our products in a modular construction, so we have the possibility to combine all modules to customer specification. We provide them with built-in stereo microscopes in warming plates and vibration-free elements for ICSI microscopes. These units will be installed in selected airflow benches and IVF-tables into the worktop according to their needs.

Work surface The polish stainless steel work surface is designed and tested, for standard works on the current international IVF laboratories. The newly developed countertop has a specially curved front edge, for relaxing work.

Warming plates The heating area is highlighted with a Laser characteristic visible. The basic construction of the heat surface consists of a glued-on aluminum plate. Inside the milled grooves, is heating conductors placed with highest safety. The heating plate is from the bottom insulated and protected with a cover. The Working temperature RT+5°C ~ 50°C ±0,2°C without use air-flow. The electric heating is switching OFF with 60°C safety-switch. The microscope light bases are mounted under the warming plates.

Microscope glass The adjustable Standard-glass is 60 mm light through glass is flush with the work surface. In option heated warming glasses 90 mm, from OKO etc. In option 84 mm glasses with the modern VisiLED light system

Temperature controlling (Warming plate only) The standard temperature control is via a double-display-controller with a restive display of target SET and ACTUAL value. The controller are self-calibrating and therefore do not require any maintenance. The electronics components we assemble at or below the work surface, to the best operability of the user work process. This controller is easy to operate and visibly mounted in the front edge of the worktop. In option we offer a two-channel 3,5” touch-screen-monitor.


Double Temperature controlling (Warming plate & TOKAI-Hit-heating glass) The standard temperature control is via a double-display-controller with a restive display of target SET and ACTUAL value. The second temperature control is via double-display-controller for Tokai-Hit heating glass. The electronics components we assemble at or below the work surface, to the best operability of the user work

process. The heating glass is 90 mm for the Stereo microscope.

Touch-screen Monitor Temperature controlling (Warming plate & OKO-heating glass) DICON touch screen Temperature Program Controller 3,5” TFT color display (320 x 420 Pixel, 256 colors) double Channel controlling included weekly-timer. The monitor has integrated two separate weekly timer-functions. For update etc. is installing a USB-port. This two channel touch-screen-monitor we installing together with

OKO warming glass. The heating glass is 90 mm for the Stereo microscope. 1

st Line: warming plate controlling / with timer function

2nd

Line: OKO warming glass controlling / with timer function

Light systems We install original stereo-microscope systems from Leica, Olympus, Nikon, Zeiss etc. Here it should be noted that the light remains easy to use only original in microscope. We offer a Halogen-light-version of, in which the brightness of light, takes place from the front of the work surface.

VisiLED Light systems The latest modern version is a Schott-LED-light flicker free high

brigness daylight (5.600K) 84 mm with dimming function,

adjustment for Segment-light and rotation, pillar 32 mm, with which the cultures are very high contrast visible. The controller system is installing on the top from the work-surface.

CO2 / O2 Flow meter We use a gas flow meter into the back wall, per warming plate. The setting range is from 4 to 40 l/h. The pipe-connection is automatically after acceptance from the gas. These options are 100% free of Service. Remarks: The picture is included the option USB port on the top.


Cable-ports for ICSI area

The models ICSI guard2 and ICSI guard3 have two cable-troughs for electrical cables, from the ICSI utilities. so is go this cable direct from the utilities under the work surfaces. This is the best cleaning version and you have not too many cables on the top from the work surface.

Vibration-free Area

The vibration-free cutout segment inside the stainless steel plate is designed from aluminum. All components are securely mounted under the work surface, so that no additional strive required. This Damped size is wide 400 x depth 475 mm.

Vibration-free Area “passive” (Only for Granite plate) The vibration-free segment moved about 4 rubber metal elements. His passive spectrum dynamic is from 0,5 Hz to 10 Hz All rubber-metal elements are 100%free of Services. Load direction

Vibration-free Area “passive” (Only for stainless steel) The vibration-free segment moved about 4 bell-mounts elements. His passive spectrum dynamic is from 0,5 Hz to 10 Hz All bell-mounts elements are 100% free of Services.

Vibration-free Area “active”

The active vibration separation is moving about one compact electronic module with (70VA). This active module is damping about 8 electronic Actuator’s. This constructed is designed in aluminum sandwich. The active Dynamic range is from 0,7 Hz to 200 Hz, all higher frequencies to 2 kHz is passive damped. Damped-area size is wide 400 x depth 475 mm. The Front display shows weight, balance and velocity.


Safety glass vwindows

In all cabinets, we only install side window and front wind-shields in safety glass (ESG). In the vertical Flow Cabinet, is the hanging front wind-shield for the microscope is cut. In the Class II Cabinet is the windshield electrical operating.

Imported: Operate the hanging wind-shield in vertical Flow Cabinets exclusively with two hands!

Main filter

The H14 HEPA-filter (high efficiency-particular air-filter) are efficiency for the highest and provide the required particle-separation. The filter separation is 99,995 % and absorbed particles > 0,3 µm. The aluminum frame has special seals on both sides. Remarks: The durability of the filter-elements is in dependence of the air quality in the Laboratory.

Exhaust filter

Only in Class II Cabinets The H14 HEPA-filter (high efficiency-particular air-filter) is efficiency for the highest and provides the required particle-separation. The filter separation is 99,995 % and absorbed particles > 0,3 µm. The aluminum frame has special seals on both sides.

Pre filter Not in Class II Cabinets

The G3 filter is a coarse-dust-filter and has a separation efficiency of 82%. Self cleaning is possible by blowing.

Announcements

International Warranty Varolab offer 36 mounts international warranty

o parts only o parts available on Ex-Work Basic (EXW) o parts warranty 90 days replacement o parts shipping excluded


ICSI table Magnum passive “granite” Heavy vibration-free ICSI microscope table Magnum passive for your inverted microscope. The Frame is made from rectangular tubular, a stable welded steel-construction. It has a completely smooth surface and can be compensated by adjusting screws. This Types is for all standard Laboratory applications

o Work surface height leveling from 780 to 835 mm o Passive dynamic 0,5 Hz to 10 Hz o Available in three standard sizes 0,9 m; 1,2 m and 1,4 m o Special sizes can be on request o Damping loading area max. 100 kg o For individual, we offer a lot of accessories

o This Types is for all standard Laboratory application

Compact table with granite plate “Africa-Impala-Nero” Damping the complete granite plate Damping system made about

4 each rubber-metal elements Remarks: The table is visible with Monitor pillar & Containers.

TECHNICAL WEIGHT CALCULATION for a Granite plate:

width x depth x thickness x 2,8 = weight kg Example: 700 x 1200 x 60 mm x 2,8 = 141 kg

- New -

Magnum passive “light” The main arguments for Magnum passive “Light” o Light to handle o Low cost o Light to ship (1200 x 800 x 300 mm / 120 kg) o Low ship cost o Only isolated the microscope area o Work surface is made from stainless steel o Frame is made from aluminum o The frame high leveling from 780 to 830 mm o Frame is bolted together in the Lab (4 each) o Frame is powder painted


ICSI table Magnum passive “stainless steel” Heavy vibration-free ICSI microscope table Magnum passive for your inverted microscope. The Frame is made from rectangular tubular, a stable welded steel-construction. It has a completely smooth surface and can be compensated by adjusting screws.

o Work surface height leveling from 780 to 835 mm o Passive dynamic 0,5 Hz to 10 Hz o Available in three standard sizes 0,9 m - 1,2 m - 1,4 m o Special sizes can be on request o Damping loading area max. 100 kg o For individual, we offer a lot of accessories

o This Types is for all standard Laboratory application

Compact table with stainless steel plate Special curved front allowing for relax work Damping only the microscope area Damping system made about

4 each bell-mounts elements Easy to handling and transportation

ICSI table "Magnum active" Heavy vibration-free ICSI microscope table Magnum active for your inverted microscope. The Frame is made from rectangular tubular, a stable welded steel-construction. It has a completely smooth surface and can be compensated by adjusting screws.

o Work surface height leveling from 780 to 835 mm o Active dynamic 0,7 Hz to 200 Hz,

Higher frequency to 2 kHz passive o Available in two standard sizes 1,2 m - 1,4 m o Special sizes can be on request o Damping loading area max. 100 kg o For individual, we offer a lot of accessories

o This type is for extremely building vibrations applications

and compensates all vibrations far better than any other available equipment on the market!

Compact table with stainless steel plate Special curved front allowing for relax work Damping system over electronic module (70VA)

only the microscope area Designed aluminum sandwich system Easy to handling and transportation Power 1/PE AC, 115 – 230V 50/60Hz


ICSI sterile flow Cabinet "guard2" ICSI guard2 is a sterile work bench with horizontal laminar air flow. These devices are characterized by a long and wide working space and do not require windshield. Our newly developed work surface has a special curved front so that is for relax long time work.

o Two-stage ventilation-system with 0,32 and 0,38 m/s o H14 HEPA-Main-filter efficiency (99,995%) o G3 Pre-filter elements o Side wall made from safety-glass o Working without front-windshield o Available in two sizes 1,2 m and 1,8 m o ordered to active or passive Damping systems o Damping only the ICSI microscope area o two Cable-through holes for the ICSI-area o specially Aluminum leveling base stand 780 – 835 mm o Total height incl. leveling base stand 2130 mm o Power 1/PE AC, 230V 50Hz

o For individual, we offer a lot of accessories o Door size for transportation must be 800 mm

ICSI-area „active" Size 1,2 m made in the center Size 1,8 m standard left side, optional right side Operations Principles

ICSI-area „passive" Size 1,2 m made in the center ► Room air / dirty air Size 1,8 m standard left side, optional right side ► Filtered air

Stereo microscope-area, only in 1,8 m version Warming plate standard right side, optional left side Warming area wide 680 x depth 380 mm We installing Stereo Microscope from

Leica, Olympus, Nikon, Zeiss etc. with pillar 32 mm optional with advanced light source or LED-light

The ambient air is drawn in from the Top through the upper part of the cabinet via a pre-filter and it then passes after filtration through a H14 HEPA/ULPA filter into the working area in an horizontal laminar air flow pattern and exhausted outside


ICSI sterile flow Cabinet "guard3" ICSI guard3 is a sterile work bench with vertical laminar air flow. This work bench operates with positive pressure with a long and wide working space. At the front of a windshield mounted with cut-outs for the microscopes. For better operability is the windshield folding.

o Two-stage ventilation-system with 0,32 and 0,38 m/s o H14 HEPA-Main-filter efficiency (99,995%) o G3 Pre-filter elements o Side wall made from safety-glass o Working with folding safety glass windshield

1,2 m ea. one / 1,8 m two ea. half windshield o Available in two sizes 1,2 m and 1,8 m o 1,2 m one power socket inside the back wall o 1,8 m two power sockets inside the back wall o ordered to active or passive Damping systems o Damping only the ICSI microscope area o two Cable-through holes for the ICSI-area o Aluminum leveling base stand 780 – 835 mm o Total height incl. leveling base stand 2130 mm o Power 1/PE AC, 230V 50Hz


Operations Principles

ICSI-area „active" Size 1,2 m made in the center Size 1,8 m standard left side, optional right side ► Room air / dirty air ► re-circulated air

ICSI-area „passive" ► Filtered air Size 1,2 m made in the center Size 1,8 m standard left side, optional right side

Stereo microscope-area, only in 1,8 m version Warming plate standard right side, optional left side Warming area wide 680 x depth 380 mm We installing Stereo Microscope from

Leica, Olympus, Nikon, Zeiss etc. with pillar 32 mm optional with advanced light source or LED-light CO2 flow meter 0 - 40 l/h inside the back wall

The environment air is drawn from the top of the cabinet via a pre-filter and then pulled down words and filtered by virtue of H14 HEPA/ULPA filter into the working area in vertical laminar air flow pattern. About half of the volume is exhausted outside into the environment and remaining volume is re-circulated by means of slots positioned at the bottom of the back Panel.


Easy This work-plate Easy is made for customers who to modernise their present lab wok-plates to current standards of IVF-working. This table is for customers, who have sterile laboratory air. The polish work-plate is made of high-grade stainless steel on with a special ground finish identifies the electrical warming area.

o Available in four sizes in 0,9 m; 1,2 m; 1,5 m and 1,80 m o Warming plates single or double

with or without stereo microscope installing o Warming area wide 680 x depth 380 mm o Trolley exclusive wide 370 x depth 300 mm o Aspirations table wide 500 x depth 380 mm o We installing Stereo Microscopes from

Leica, Olympus, Nikon, Zeiss etc with pillar 32 mm o optional with advanced light source or LED light o electronic components positioned at the front side o Power 1/PE AC, 230V 50Hz

o For individual, we offer a lot of accessories

Basic2 The lab table Basic2 is a stainless steel construction with a media channel. The base has a frame construction can be leveled using stainless steel adjusting screws. This table is for customers, who have sterile laboratory air. The polish work plate is made of high-grade stainless steel on which a special ground finish identifies the electrical warming area

o Available in three sizes in 1,2 m; 1,5 m and 1,8 m o Warming plates single or double

with or without stereo microscope o Warming area wide 680 x depth 380 mm o We installing Stereo Microscopes from

Leica, Olympus, Nikon, Zeiss etc with pillar 32 mm o optional with advanced light source or LED light o electronic components positioned at the media channel o two power socket o CO2 Flow-meter with pipe connector, Range 4 – 40 l/h o Powder painted Steel leveling base stand 835 mm o Power 1/PE AC, 230V 50Hz



Classic2 Classic2 is a sterile work bench with horizontal laminar air flow. These devices are characterized by a long and wide working space and do not require windshield. Our newly developed work surface has a special curved front so that is for relax long time work.

o Two-stage ventilation-system with 0,32 and 0,38 m/s o H14 HEPA-Main-filter efficiency (99,995%) o G3 Pre-filter elements o Side wall made from safety-glass o Working without front-windshield o Available in four sizes 0,9 m; 1,2 m; 1,5 m and 1,8 m o Warming plates single or double


Leica, Olympus, Nikon, Zeiss etc with pillar 32 mm o optional with advanced light source or LED light o electronic components positioned at the front side o Powder painted Steel leveling base stand 835 mm o Total height incl. leveling base stand 2130 mm o Power 1/PE AC, 230V 50Hz



► Room air / dirty air ► Filtered air

The ambient air is drawn in from the Top through the upper part of the cabinet via a pre-filter and it then passes after filtration through a H14 HEPA/ULPA filter into the working area in an horizontal laminar air flow pattern and exhausted outside


Avantgarde4 Avantgarde4 is a sterile work bench with vertical laminar air flow. This work bench operates with positive pressure with a long and wide working space. At the front of a windshield mounted with cut-outs for the microscopes. For better operability is the windshield folding.

o Two-stage ventilation-system with 0,32 and 0,38 m/s o H14 HEPA-Main-filter efficiency (99,995%) o G3 Pre-filter elements o Side wall made from safety-glass o Working with folding safety glass windshield

1,20 m ea. one / 1,80 m two ea. half windshield o Available in three sizes 1,2 m; 1,5 m and 1,8 m o Warming plates single or double


Leica, Olympus, Nikon, Zeiss etc with pillar 32 mm o optional with advanced light source or LED light o electronic components positioned at the front side o CO2 flow meter 0 - 40 l/h inside the back wall o Painted steel leveling base stand 835 mm o Total height incl. leveling base stand 2130 mm o Available in three sizes 1,2 m; 1,5 m and 1,8 m o 1,2 m one power socket inside the back wall o 1,5 m & 1,8 m two power sockets inside the back wall o Power 1/PE AC, 230V 50Hz



► Room air / dirty air

► re-circulated air ► Filtered air

The environment air is drawn from the top of the cabinet via a pre-filter and then pulled down words and filtered by virtue of H14 HEPA/ULPA filter into the working area in vertical laminar air flow pattern. About half of the volume is exhausted outside into the environment and remaining volume is re-circulated by means of slots positioned at the bottom of the back Panel.


IVF guard IVF guard Microbiology Class II Safety Cabinet, with the choice of materials of construction of the highest quality guarantees conformity to the strictest safety standards, product and environmental protection about vertical laminar air flow system. 70% air re-circulated and 30% air exhaust designed & built to performance requirements of the EN-12469:2000.

o This Cabinet have the lowest power consummation and the lowest noise level on the market

o H14 HEPA-Main-filter efficiency (99,995%) o H14 HEPA-Exhaust-filter efficiency (99,995%) o Two-stage ventilation-system o Double centrifugal fan provide complete operator o Low pressure Drop HEPA filter increased media

filtration for double filter lifetime o All window made from safety-glass o Front glass electrical operated, 250 mm opening size o Available in four sizes 0,9 m; 1,2 m; 1,5 m and 1,8 m o Warming plates single or double

with or without stereo microscope o Warming area wide 580 x depth 350 mm

o We installing Stereo Microscopes from Leica, Olympus, Nikon, Zeiss etc with pillar 32 mm

o Dimming modern flicker-free Microscope LED light, brightness-daylight 5.600 k, lamp life >30.000 hrs

o electronic components at the top from the work surface o Painted steel leveling base stand 835 mm o Total height incl. leveling base stand 2300 mm o Available in three sizes 1,2 m; 1,5 m and 1,8 m o 1,2 m one power socket inside the back wall o 1,5 m & 1,8 m two power sockets inside the back wall Operations Principles o Power 1/PE AC, 230V 50Hz

o For individual, we offer a lot of accessories ► Room air / dirty air o Door size for transportation must be 800 mm ► re-circulated air

► Filtered air

The ambient air is drawn in from the slots at the stainless-steel base of the front opening and it then passes under the work surface, from where it is drawn up and blown into the plenum of the recalculating and exhaust fans. The “bio-dynamic sealing system” of the negative pressure plenum ensures that all contaminated particles are automatically drawn to the plenum or pressure chamber to be captured by the main re-circulating and exhaust H14 HEPA filters. The fan system assures that no part of the cabinet comes ever under positive contaminated pressure to the laboratory, thus protecting and preserving the environment and operating personnel from exposure to agents of bio-contamination. 70% of the filtered air is re-circulated (after passing through a H14 filter) in a air clean less in Class ISO 3, according to ISO 14644-1 laminar flow pattern downwards into the work chamber and the remaining 30% is exhausted to atmosphere through another H14 HEPA filter.

product presentation - · pdf filebefore a module thrives to product-ripe, it ... hanging...

Documents