product overview - pumps and service overview.pdf · product overview. general purpose tefc single...
TRANSCRIPT
Baldor’s mission is “to be the best (as determined by our customers) marketers, designers and manufacturers…”
PRODUCT OVERVIEW
GeneralPurposeTEFC
SinglePhase
TwoSpeed
Woodworking/ArborSaw
FarmDuty
CommercialDuty SmartMotor
VectorDuty
InverterDuty
C-FaceandD-Flange
50Hertz
GeneralPurposeODP• Single and Three Phase• 1/12 Hp thru 600 Hp stock,
to 800 Hp custom• Foot and Face Mount• Enclosures: TEFC and
TENV• Low and medium voltage
including 200V and 575V
• Single and Three Phase• 1/12 Hp thru 600 Hp
stock, to 1500 Hp custom• Foot and Face Mount• Enclosures: ODP, WPI,
WPII• Low and medium voltage
including 200V and 575V
• Single Phase• 1/12 thru 15 Hp stock• Enclosures TEFC, TENV
and ODP• Foot or face mount
• Single and Three Phase• 1/3 thru 60 Hp stock,
custom to 1250 Hp• Enclosures: TEFC, ODP
and Explosion Proof• Foot and face mount• NEMA or IEC Mounting
• Three Phase• 1/12 Hp thru 25 Hp stock,
1000 Hp custom• Enclosures: TEFC, OPEN
and OPSB
• C-Face motors available from stock in most all configurations and product families
• D-Flange motors are available as custom items or through Mod Express
• NEMA or IEC style
• Three Phase• Low Profile• Supplied with keyway and
non threaded shaft• Custom shaft threading thru
Mod Express• Double row ball bearings for
maximum shaft stability• 7-1/2 thru 15 Hp stocked
• 1/3 Hp thru 200 Hp stock, custom to 800 Hp
• Enclosures: TEBC, TENV and TEFC
• Stocked as Washdown, Paint Free, All Stainless and Explosion Proof
• Inverter Gear Motors also available
• Single and Three Phase• 1/3 Hp thru 30 Hp• Foot and Face Mount• Epoxy finish
• 1/3 Hp thru 500 Hp stock, custom to 800 Hp• Enclosures: TEBC and TENV• Stocked with foot and face
mount to 256TC frame• Includes mounted 1024 PPR op-
tical encoder and Milspec-style connector
• 1-10 Hp Washdown duty stocked
• Single and Three Phase• 1/4 Hp thru 3 Hp• Enclosures: ODP and
TEAO• Foot and Face Mount
• 230 or 460 volts• 1 thru 10 Hp stock• TEFC Enclosure: • C-Face with base• Optional 32 character
operator keypad and cable
Motors
F2Mount
Quarry/CrusherDuty
AutomotiveDuty
BrakeMotors
DesignDOilFieldPump
IECFrameMetric DCDrive
Tachometers/FeedbackDevices
• Enclosures: TEFC and ODP• 1 Hp thru 60 Hp stocked• Super-E Cast Iron TEFC 15
Hp thru 30 Hp in stock• F2 mount on other sizes
available through Mod Express
• Three Phase• 1 thru 15 Hp Quarry Duty
Design C in stock• 100 thru 300 Hp Crusher
Duty stocked with roller bearing for heavy belted loads
• TEFC, U-Frame• 1/4 Hp thru 100 Hp• Epoxy Finish• GM7EQ Approved• High Efficiency• Low Noise Levels
• Single and Three Phase• 1/4 Hp thru 30 Hp stock,
larger available as custom• Standard and Super Efficient• Enclosures: ODP, TEFC,
TENV and Explosion Proof• Foot and Face Mount• Washdown Super-E 1/2 thru 5 Hp
• Three Phase• 2 thru 150 Hp stock• Enclosure: TEFC and ODP• 230/460/796 12-lead or
460/796 6-lead • High slip Design D winding
• 50 or 100 volt/1000 RPM DC tachs available in choice of: PY flange or base mount,
• XC42 or 46 foot and face • 8.5” rabbet pancake style AC or
DC output• PY flange encoder• Hollow shaft encoders and pulse
generators
• Three Phase• 18 thru 30 kW stock, 1100
kW custom• Enclosures: TEFC• F2 mounted Conduit box• B3 foot, B5 flange or B14
face mount• 50 or 60 Hz
• DC SCR Drive• 230 Volt 5 thru 300 Hp• 460 Volt 5 thru 600 Hp• 240 or 500 Armature Volts• DC Motor Field Supply• One Way or Line Regenerative• Armature or Motor Feedback• 115 Volt 1/100 thru 2 Hp
Motors
LiftingMagnetGenerators
LowVoltageandDCPower
WoundFieldDC
PermanentMagnetDC• SCR-rated 90 or 180 volt• 1/50-5 Hp stocked• Enclosures: TENV and TEFC• C-Face with base• Tach Adaptable• Explosion proof in stock 1/4
thru 1.5 Hp• Integral tach in stock 1/4 thru 5 Hp
• SCR-rated 90, 180, 240 or 500 volt• 1/4 thru 500 Hp stocked• Enclosures: TENV, TEFC, DPFG, DPBV, TEUC and TEAO• C-Face with base thru 10 Hp in stock• Tach adaptable• Explosion proof thru 3 Hp in stock
• 12 and 24 volt permanent magnet, 1/4 thru 1 Hp stocked
• 115 and 230 volt com-pound wound power motors stocked 1/3 thru 1.5 Hp, custom to 500 Hp
• Enclosure: TENV and TEFC• Base mounted
• 230 volt, three phase compound wound with drooping voltage characteristic
• 5 thru 40 kW stocked, custom to 100 kW• Heavy steel frame with cast
iron endplates• Choice of foot or foot with face mount
DirectCurrentMotorsandDrives
StockAvailability
CustomCapabilities
ModExpress
Grinders
Buffers
Dental/PolishingLathes ExplosionProof-1.15SF
ExplosionProof
Super-EExplosionProof
IndustrialPrime/Standby
Towables&LightTowers
PortableGenerators• Baldor maintains the
largest inventory of stock motors, drives, gear products and generators in the industry
• 36 distribution centers in the US and Canada
• Over 6500 items available for immediate shipment
• Industrial portables range from 1,100 to 11,000 watts
• Gasoline, multi-fuel and diesel designs
• Available features include: Focal Vibration System, Auto Idler, Switchless Full Power
• Custom motor lead-time in two weeks on existing designs
• Special electrical and mechanical designs suited to OEM needs
• Ratings from 25KVA to 250KVA
• Available with or without trailer
• Diesel engines• Mobile Light Towers - 6000 watt - (4) 1000 Watt Halide Bulbs
- 30 ft. Mast
• Mod Express performs simple modifications to stock product to allow shipment in 2-3 days
• Modification changes include: mounting, enclosures, shaft, space heaters, drains, seals and weatherproofing
• Diesel Ratings from 20 kW to 2000 KW
• LP and Nat. Gas to 880 kW• Engines include: GM, John
Deere, Detroit, Mitsubishi• Prime Power, Commercial
standby, Peak shaving
• Bench and Tool Grinders• Industrial Quality• Continuous Duty• 6” through 14” wheels• Pedestals and other
accessories available
• Three Phase• 1 Hp thru 60 Hp stock, to
300 Hp custom• Enclosures: TEFC and TENV• Class 1 Group C & D, Class
II Group F & G• U.L. approved cast conduit
box standard• Low voltage
• Cotton wheel buffing• Extra long double shafts• Fractional through 7.5 Hp
• Single and Three Phase• 1/4 Hp thru 300 Hp stock• Class I Group C & D; Class II Group F & G • Foot and Face Mount• Corrosion resistant epoxy
finish• U.L. approved cast conduit
box included
• Can be used for Dental, Jewelry and Lapidary applications
• Single and two speed models
• Three Phase• 2 Hp thru 100 Hp stock• Class I Group C & D only, T3C• Corrosion resistant epoxy finish• U.L. approved cast conduit box
included• Labyrith-type recessed slinger
& XP breather/drain• 230/460 and 575 Volt in stock
Capabilities
Grinders,BuffersandLathes
Generators
ExplosionProofMotors
WashdownDuty
Paint-FreeWashdownDuty
All-StainlessWashdownDuty
DirtyDutyWashdown
Inverter/VectorDutyWashdown
PMDCWashdown
Super-ESinglePhase
Super-EOpenDripProof
TotallyEnclosedFanCooled• Three Phase• 1 Hp thru 500 Hp Stock, to
800 Hp custom• Enclosures: TEFC• Foot and Face Mount• Inverter-Ready• Low and medium voltage
including 200V and 575V
• Single and Three Phase• 1/2 Hp thru 20 Hp stock• Enclosures: TEFC and TENV• Base mount, C-Face with or without
base or JM pump shaft• Available with BISSC approval• Standard and Super-E efficiency• IEC Ratings Available
• Three Phase• 1/2 Hp thru 10 Hp stock• Enclosures: TEFC and TENV• C-Face with or without base• Labyrinth seals • Standard and Super-E
efficiency• IEC Ratings Available
• Three Phase• 1 Hp thru 300 Hp stock, to
1500 Hp custom• Enclosures: ODTF, OPEN,
OPSB, WPI and WPII• Inverter-Ready• Low and medium voltage
including 200V and 575V
• Three Phase• 1/2 Hp thru 10 Hp stock• Enclosures: TEFC and TENV• C-Face with or without base• Labyrinth seals • Standard and Super-E
efficiency• IEC Ratings Available
• Single Phase• 1/4 Hp thru 5 Hp stock, to
15 Hp custom• Enclosures: TEFC and ODP• Foot or face mount
• Three Phase• 1/2 Hp thru 10 Hp stock• Enclosures: TEFC and TENV• C-Face with or without base• Weatherproof per IEEE 45
and USCG 259 for below deck use
• Standard efficiency
• 230/460 volts• Inverter Washdown, 1 thru
10 Hp stock• Inverter Paint Free, 1 thru
10 Hp stock• Vector Washdown, 1 thru
10 Hp stock• Enclosure: TENV and TEFC• C-Face with base
• SCR-rated 90 and 180 volt• 1/4 thru 5 Hp in stock• Enclosure: TENV and TEFC• C-Face with foot• Paint Free Washdown in
stock 1/4 thru 1 Hp
WashdownDutyMotors PremiumEfficientSuper-E®Motors
Super-EBrakeMotors
HVAC
Chiller/CoolingTower
• Three Phase• 1 Hp thru 30 Hp stock• Enclosures: TEFC and TENV• Inverter-Ready brake
connection• NEMA standard BA
dimension• Easily convertible to C-Face
• Single and Three Phase• 1/4 Hp thru 75 Hp• Enclosures: OPAO, TEAO
TEFC and OPEN
• Three Phase• Corrosion Resistant Epoxy Finish• Double sealed Bearings with
Inpro/Seal®
• Stainless Steel Nameplate• Corrosion Resistant Hardware• Designed for high humidity
environment• 5 Hp-7 Hp in stock
HVACMotors
Super-EPumpMotors
PumpMotors
P-BaseMotors
Gears
SubfractionalGearmotors
WPI-WPII
TEFCAboveNEMA• Low and Medium Voltage• 250-500 Hp stock to 800 Hp
custom• Severe Duty and IEEE 841
available• Sleeve bearings available• Standard aluminum and
copper bar rotor designs
• Low and Medium Voltage through 600 Hp Stock to 1500 Hp Custom
• Sleeve bearings available• Super-E NEMA Premium®
efficiency available• Standard aluminum and
copper bar rotor designs
• Three Phase• 1 Hp thru 50 Hp stock, to
250 Hp custom• Enclosures: TEFC and ODP• JM, JP and West Coast
Shafts• Inverter-Ready
• Single and Three Phase• 1/4 Hp thru 125 Hp• Enclosures: ODP, OPEN,
OPSB, TENV and XPFC• 56J, JM, JP and West
Coast Shafts
• AC and DC ratings• Right Angle and Parallel
Shaft 1/50 through 1/2 Hp• Enclosures: TENV and
TEFC
• Three Phase• 1/4 Hp thru 75 Hp stocked• Enclosures: OPEN and TEFC• Normal, medium and high thrust designs• Standard and Super Efficiencies
• Single and Double reductions from 5:1 to 3600:1
• Output ratings to 9000 in-lbs.• Right angle, parallel shaft and
ratio multipliers• Optional mounting bases and
accessories• Available in Washdown Duty
and Stainless Washdown
InverterGearmotors• 230 volt 3/8 Hp inverter
gearmotors• Right angle 490 RPM @
68 in-lb thru 33 RPM @ 315 in-lb
• Parallel shaft 490 RPM @ 58 in-lb thru 82 RPM @ 350 in-lb
PumpMotors
LargeFrameMotors
GearProducts DirtyDuty
Super-ESevereDutyIEEE841
Super-ESevereDuty• Three Phase• 1 Hp thru 500 Hp stock, to
800 Hp custom• Enclosures: TEFC and TENV• Foot and face mount• Inverter-Ready• Low and medium voltage
including 575V
• Three Phase• 1 Hp thru 250 Hp stock, to
800 Hp custom• Enclosures: TEFC and TENV• Exceeds the IEEE 841-2001
standards for severe duty TEFC induction motors
• InproSeal® on fan & drive end shafts
• Three Phase• 1 Hp thru 20 Hp stock• Enclosures: TEFC and TENV• Foot and face mount• Corrosion-resistant epoxy finish• Washdown Dirty Duty®
SevereDutyMotors
SoftStart• Digital and Solid State Controls• Single Phase Starters• Three Phase Starters• Three Phase Torque Controls• Three Phase Electronic Brake• 115, 230, 460 & 575 Volt units• Ratings of 1/4 thru 800 Hp • Control & Combination Starters
HSeriesDrives
MiniInverterDrives
MicroInverterDrives
H2Drives
Baldor’sMintMTSoftware
LinearMotors
MotionControl
ServoDrives
DCServoMotors
ACServoMotors
• Inverter, Vector Drives and AC Servo versions available
• 230 Volt 3/4 thru 60 Hp• 460 Volt 3/4 thru 1500 Hp• 575 Volt 3/4 thru 1500 Hp• Line Regenerative versions
available• PID Process Control Loop• Washdown Enclosures available
• Peak torques over 1500 lb-in (170 Nm)• Standard or low inertia• Potted stator - superior protection for high voltage and current spikes• Premium 200°C moisture resistant, multi-coated wire• Stainless steel IP67 enclosures
available
• 230 Volt 1/3 thru 5 Hp• 460 Volt 1 thru 7.5 Hp• Simple Potentiometer
or Fully Programmable Operator Display
• Heavy Duty Industrial Ratings
• Dynamic Braking Option• NEMA 1 Enclosures
• Peak torques to 283 lb-in (32 N-m)• High continuous 155°C operating
design• Optimized long life copper-graphite
brushes• Premium 200°C moisture resistant,
multi-coated wire• Variety of feedback devices available
• 115 Volts 1/2 thru 2 Hp• 230 Volts 1/2 thru 2 Hp• Chassis Mount or NEMA 4
Enclosures available• Potentiometer Operator
Control• Start/Stop Command• Auto or Manual restart
• Operate either rotary or linear brushless servo motors• PC or Keypad setup• 115/230/460V models - continuous to 54 amps• Full auto-tuning wizard - current velocity & position• Programmable • Device Net, ProfibusDP, CANopen, Ethernet
• Multi-axis control • Digital and Analog I/O• Available in PCI format or standalone units with USB and serial interfaces• Program via Baldor’s MintMT
(Multi-Tasking), embedded ‘C’ or ActiveX • Device Net, ProfibusDP, CANopen, Ethernet
• Very high acceleration - up to 10 g’s (9.8 m/s2)
• High speeds to 320 in/sec (8 m/s)• High peak forces to 3100 lbs
(13,800 N)• Extremely low backlash, high
stiffness• Positioning to 50 nm
• Inverter, Encloderless Vector, Vector Drive and AC Servo available
• 230 Volt 3/4 thru 60 Hp• 460 Volt 3/4 thru 150 Hp• 575 Volt 3/4 thru 150 Hp• Graphical Operator Display• PID Process Control Loop• Ethernet Connection option
• High speed compiled Basic programming language for motion and machine control
• Multi-tasking capability for motion, I/O, HMI and communication tasks
• Modular programming capability
Drives MotionControlandLinearProducts
Pre-EngineeredPanel• Inverter, Encoderless Vector and
Vector Drives available• Open Panel, NEMA 1 or NEMA 12• Keypad, 2-Wire or 3-Wire control operation• Control Bypass Option• Line Disconnect Option• Line Reactor & Load Reactor Option• Custom Configurations
• Usable as Input Line Reactors and Output Load Reactors
• Stock ratings for 3% Impedance• 60 Hz ratings of 208/230, 460
and 575 Volts• 50 Hz ratings of 208/240 and
380/400/415 Volts• Optional NEMA 1 Enclosures
ThreePhaseACReactors