product offer for commercial lineset cover product ... · architectural linesets cover: the...

Product offer for Commercial lineset cover

Copyright © 2020 Inaba Denko America All Rights Reserved.

Product : SLIMDUCT RD

RD

2

Traditional Application 1 - Without Covers


But, NO covers or lids.

Issues:

Not good appearance.

Might cause severe damage on insulation

due to UV light, rain water, bad air, accidental damage,

or vandalism, which might result in gas leakage from

copper and reduce energy efficiency of air conditioners.

Application:

Put on metal trays. Put on mesh wires. Supported by stand brackets

3

Traditional Application 2 - Jacketing


Issues:


Space waste - One line can’t accommodate multiple linesets.

Might easily cause deformation or crack due to exterior force.

Might get rust due to rain water or bad air.

Takes time for installation.

Difficult to perform maintenance for

lineset inside of cover.

Application:

Accommodated by jacketing, round type sheet metal.

4

Traditional Application 3 - Sheet Metal


Issues:


Space waste - Too big enough to accommodate linesets.

Might easily cause deformation due to exterior force.

Might get rust due to rain water or bad air.

Difficult to transport.

Difficult to perform maintenance for lineset

inside of cover.

Application:

Accommodated by box made of sheet metal.

5

SLIMDUCT RD - Elegant Appearance

Architectural Linesets Cover:The professional and aesthetic finish blends perfectly in with any type ofcommercial building, which exterior will be enhanced by the sleek appearance of finished installation.


Keeps the value of buildings higher for the property owners.

6

SLIMDUCT RD - Multiple Application


Optimizes the limited space of the buildings for the property owners.

Multiple Application:Use of various fittings available such as risers, vertical mountings and under-slab mountings enables it to be easily customized on-site during the installation and to be installed in any orientation. NOTE: Excludes some sizes.

Compact Design:Because of its compact design, it requires less space than traditional installation. But it can accommodate a lot of linesetsin one run.

7

SLIMDUCT RD - Easy Installation and Maintenance


Reduces man-hours on-site and realizes easy maintenance for HVAC contractors.

Easy Installation:No special tools are required to assemble and connect together, and it is assembled by only two kinds of screws included.

Easy Maintenance for AC:Its WALKWAY TYPE with an anti-slip surface permits maintenance personnel to walk on ducts without damaging them or linesets duringroutine maintenance of any mechanical equipment on the rooftop.

Easy Maintenance for linesets; Unscrewing enables maintenance personnel to perform maintenance oflinesets inside of it.

8

SLIMDUCT RD - Heavy Duty Material


No necessary to replace SLIMDUCT RD in as far as appropriate use.

Durability and Weather Resistance:It is fabricated from ZAM® which offered superior resistance over stainless steel even in highly corrosive atmosphere such as seashore.

NOTE: ZAM® is a highly corrosion-resistant hot-dip coated steel sheet has a coating layer of zinc, 6% aluminum, and 3% magnesium.

Scratch and Abrasion Resistance:The coating layer contains a higher proportion of magnesium and is more rigid than the standard galvanized sheet. It offers superior scratch and abrasion resistance to ensure that any scratch or cut edges will be covered by a zinc protection film in a fewmonths.

Salt Tolerance: Salt Resistant Specification.

9

SLIMDUCT RD - Reliability


SLIMDUCT RD is a reliable option for the building owners and HVAC contractors.

Reliability throughout the world:From the roll-out in 1988, it has been gaining the reliability from the markets throughout the world for over 30 years, Japan, USA, Mexico,UK, Taiwan, Hong Kong, Indonesia, Thailand, India, etc.

10

SLIMDUCT RD - Technical Specifications


Keeps outstanding performance during the lifetime of AC Units.

Material:ZAM®, highly corrosion-resistant hot-dip galvanized steel sheet has a coating layer of zinc, 6% aluminum, and 3% magnesium.

Tensile Strength: More than 274.6N/mm2 (=28kgf/mm2)(=39.885psi)

Salt Tolerance: Salt Resistant

Stretch: More than 28%

NOTE: Coating volume: 190g/m2 (=0.62oz/ft2) per sideMechanism of Corrosion Resistance

11

SLIMDUCT RD - Line-Up


SLIMDUCT RD can go through any complicated configuration.

Size: Totally 35 combinations

Fittings/Parts: Totally 296 SKUs

Width: 6”, 11-7/8”, 17-3/4”, 23-5/8”, 35-1/2”

Height: 4-3/8”, 5-3/8”, 10”

Length: 11-7/8”, 19-3/4”, 39-3/8”, 8-3/4”

Primary :

Supplementary : Refer to our catalog or website.

WALKWAY type : Available in the primary fittings.

12

SLIMDUCT RD - Lineset Capacity


Less material means cost effectiveness for the owners and HVAC contractors.

Lineset Capacity

NOTE: Nominal lineset capacities for SLIMDUCT RD can differ according to the configuration of lineset installed.Capacities shown are based on Net Usable Section Area of each duct size and are for reference only/

13

SLIMDUCT RD - Job References


NOTE: For further information, refer to our catalog or the Installation Manual on our website.

14Copyright © 2020 Inaba Denko America All Rights Reserved.

Inaba Denko AmericaHVAC div. of PATLITE (U.S.A.) Corporation

20130 S. Western Avenue Torrance, CA 90501Tel: 310-328-3222Fax: 310-328-2676E-mail: [email protected] : inabadenko-america.com

product offer for commercial lineset cover product ... · architectural linesets cover: the...

Documents