product notice unicoatpro plasma final
TRANSCRIPT
-
8/10/2019 Product Notice UniCoatPro Plasma Final
1/3
Product Notice 2014-7 1
ProAlkjljlkjljkjlj
Product Notice
To: Oerlikon Metco Sales Personnel and Distributors Issue Date: September 10th, 2014
From: Omar Sabouni PLM APS Index No: 05 Equipment Plasma APS
Number: 2014-7
Subject: Availability of the UniCoatProPlasma controller core packageAffects: New product Release
Oerlikon Metco is pleased to announce the availability of the UniCoatProplasma controller.
The UniCoatPro Plasma controller is a compact single process plasma controller featuring a large and intuitive color
touchscreen interface. Please refer to the [product datasheet]for more detailed information on features and options.
Available for quotation immediately the UniCoatPro Plasma will be available only as a core package consisting of:
UniCoatPro Plasma controller
Power supply
JAMBox
Spray gun
Twin-140 powder feeder for fully integrated feeder capability (other feeders with feed start/stop only)
The Systems group will independently manage customer needs for:
Booth (cabin) selections
Gun manipulation
Part handling interfaces
Dust/fume extraction
Water cooling equipment
UniCoatPro Plasma will notimmediately be available as a standalone component.
Sales process
Quotations will be supplied according to the existing core system model.
-
8/10/2019 Product Notice UniCoatPro Plasma Final
2/3
Product Notice 2014-07 2
Standard core package options
Controller The controller will be available as three standard gas configurations
Two GasArgon 200 l/m
Hydrogen20 l/m
Three GasArgon 200 l/m
Hydrogen 20 l/m
Nitrogen100 l/min
Four Gas
Argon 200 l/m
Hydrogen 20 l/m
Nitrogen 100 l/min
Helium50 l/min
Power supply Two power supply options will be available
Inverter PT3X
Thyristor PT1140
JAMBox and Guns There will be two separate JAMBox options. Option 1 will onlysup-
port conventional single electrode plasma guns. Option 2 will sup-
port both Conventional and single electrode Cascade guns.
Conventional9MB series
Supports 3MB/7MB
F4 Series
Cascade
SinplexPro series
Powder feeders Three feeder options are available. UniCoatPro Plasma can only
support a single Twin 140 series feeder (2 hoppers).
Twin 140 series
Includes full recipe integration with the
UniCoatPro Plasma controller.
Optional Heated hoppers managed by the
controller are available
9MP & 9MPESingle feeder with on/off capability man-aged from controller. A Second feeder can
be operated in parallel.
5MPESingle feeder with on/off capability man-
aged from controller. A Second feeder can
be operated in parallel.
Miscellaneous Cables, hoses and documentation to support the core package
-
8/10/2019 Product Notice UniCoatPro Plasma Final
3/3
Product Notice 2014-07 3
FAQs
Can a customer use their existing power supply?
With the exception of most TriStar power supplies the answer at date of publication is no. UniCoatPro Plasma uses
a signal directly from the power supply to measure voltage. Previously voltage measurements were made at the dis-tribution unit (9MCD) or JAM Box. The equipment group is looking at designing interfaces to support some earlier
and competitor power supplies.
Can I use other Metco and non-Metco plasma guns?
Currently only the SinplexPro, F4 series and 9MB series (3MB&7MB can also be used with this selection) are se-
lectable from the gun menu. Other guns such as the 8MB, iPro-90, F1, F100, F210 and F300 will be added to the
gun database once they are fully validated. Some competitor guns such as the SG-100 from Praxair may be added if
there is sufficient customer demand.
Can the UniCoatPro Plasma run TriplexPro?
No. UniCoatPro Plasma only supports single electrode guns.
Will EvoLink be available for the UniCoatPro Plasma controller?
No. Evolink as a concept is currently not being considered for integration into the UniCoatPro Plasma controller.
Action:
For informationand distribution