product guide - bando usa · 4 bando conveyor belt bando chemical industries, ltd. produced the...
TRANSCRIPT
Product guide
C-C-007-018
コンベヤベルト製品案内
* The contents of this catalog are subject to change without notice.* Reprinting or reproducing all or part of these contents without our permission is forbidden.
2014.6
http://www.bando.co.jpMarketing and Sales Dept.Industrial Products DivisionBelt Business Administrative Headquarters
Bando Chemical Industries, Ltd.
4
b a n d o c o n v e y o r b e l t
Bando Chemical Industries, Ltd. produced the first conveyor belts made in Japan in 1921. Since that time, Bando has been a pioneer in conveyor belt production, and has developed the latest facilities and technologies, which have contributed to conveyor belt production in Japan at world-class levels. Our efforts are now directed at environment-friendly production and technological development, along with systems rationalization and labor savings to offer environment-friendly and safe products.
Standard Conveyor Belts............................................................... 4-5
Package Belts (for inclined conveyance)...........................................6
V-Cleat Conveyor Belts (for inclined conveyance) .............................7
Flexowell® Conveyor Belts (for steep-incline conveyance)............ 8-9
Bando Eco-Carry™ (energy-saving conveyor belts).................. 10-11
Flame Resistant Conveyor Belts......................................................12
Oil Resistant Conveyor Belts ...........................................................13
FR-450M – Flame Resistant and Highly Oil Resistant Conveyor Belts...14
Impact Resistant Rock Belts™........................................................15
Heat Carry™ – Heat Resistant Conveyor Belts.......................... 16-17
Aramid Conveyor Belts....................................................................18
Cable Conveyor Belts......................................................................19
Rip Resistant Conveyor Belts.................................................... 20-21
Pipe Conveyor Belts ........................................................................22
Cylindrical Conveyor Belts...............................................................23
Shot Blast Conveyor Belts – Endless Conveyor Belts for Tumblers....24
Moving Walkway Conveyor Belts ....................................................25
Related Products
Impact Bar AR – Impact absorbing material for conveyor belts ...26
Non Spill – Conveyor belt skirt rubber........................................27
Rubber Cloth, Canback™ (Linings for inner surfaces of hoppers and chutes) ...28
RC-Ⅰ Belt Cleaner................................................................. 29-30
SAC Belt Cleaners ................................................................ 31-32
Other Products ................................................................................33
Safe Usage of Conveyor Belts................................................... 34-35
Conveyor Belt Quality Requirements...............................................36
4 5
200
100
Belt type
■ Belt elongation guideInitial
elongation(%)
Totalelongation
(%)
Time to reachrelative elongation
stability
Monoply Belt™Rock Belt™Sun conveyor belt
0.3
0.9
0.7
1.7
0.5–1 year
1–2 years
Core body(polyester)
Belt strengthN/mm
Number of plies
Standard Conveyor Belts
* Add extra length of 0.4% to the value in the table above as take-up stroke.
Colored Conveyor Belts(White, Green)
ColoredConveyor Belts
Applicationsand
features
Rock Belts™ 0, 1 and 2
Monoply Belts™
Vinyl 300 Conveyor Belts
Vinyl 300Conveyor Belts
● Impact testApplications
andfeatures
Applications include transportation of bulk materials, such as coal, ore, limestone, cement, wood chips, crushed rock, packaged materials, powder, aggregate, earth and sand. Also suitable to transport bulk materials in large industrial facilities.1. Standard belt with CO2 reduction specification.2. Reduced electrical use.3. Superior flexibility with fewer plies.4. Superior impact resistance, gripping resistance, and tear resistance.5. Belt strength values of 630N/mm and 800N/mm are standard specifications.
Suitable for large impact applications, such as transport of rocks and debris from crushers, and transport of timber, rock, debris, earth and sand.1. Superior impact resistance and gripping resistance result
in reduced core body damage.2. Superior cut resistance and wear resistance lead to long
service life.3. Non-standard Rock Belt™ 8 has strength value of 1500
N/mm. (Refer to page 15.)
Impa
ct in
dex
Roc
k B
elt™
2
Roc
k B
elt™
1
Mono
ply™
#400
Mult
i-ply
#500
Evaluation at impact when core body torn
Applicationsand
features
Suitable for applications exposed to small-to-medium-scale impact, such as crushed stone, ore and lumber.1. Superior impact resistance and gripping resistance due to specially woven nylon canvas.2. Superior flexibility due to monopoly construction.3. Reduced scratches on the canvas.4. Superior slide-wear resistance.
Cover rubber
Monoply™(special weave)
Cover rubber
Core body canvas
Suitable to transport goods which may be adversely affected by exposure to black belts, as well as for use in assembly lines and packaging operations.1. Sharp colors.2. Reduces contamination to goods being transported.3. Green Belts reduce eye fatigue.
(Not suitable for transport of unpackaged food.)
Light-duty white and green belts suitable for oily or oil-treated products.1. Highly resistant to oil.2. One surface is white and the other is green. Odorless,
with superior non-contamination properties.3. Surface cleanliness as transported items are less likely
to adhere to the belt surface.4. Superior wear resistance compared with general
colored belts.(Not suitable for transport of unpackaged food.)
Rock Belt™
™
™
Standard types
™
Monoply Belts™
6 7
160160160160160160160160160160160160160
2.5×02.5×02.5×02.5×02.5×02.5×02.5×02.5×02.5×02.5×02.5×02.5×02.5×0
5.35.35.35.35.35.35.35.35.35.35.35.35.3
5.55.55.55.55.55.55.55.55.55.55.55.55.5
300350400450500600700750800900
100010501200
2222222222222
30035040045050060070075080090010001050
1200–1600
5.05.05.05.05.05.05.05.05.05.05.05.05.0
12121212121212121212121211
808080808080808080808080150
120°120°120°120°120°120°120°120°120°120°120°120°120°
AAAAAAAAAAAAB
Belt width (mm) Belt thickness (mm) Reference weight (kg/m2) ColorCover rubber thickness (mm)Belt strength (N/mm)BlackBlackBlackBlackBlackBlackBlackBlackBlackBlackBlackBlackBlack
Number of pliesBelt width
(mm)Cleat height
t (mm)Cleat width
b (mm)Cleat pitch
p (mm)Cleat
angle θ Type
StructureTop cover rubber
Type A Type B
1050
mm
wide
Fabric pliesBottom cover rubber
Totalthickness
Package Belts (for inclined conveyance) V-Cleat Conveyor Belts (for inclined conveyance)
Applications
Standardstructure
Standard specifications
▲ Package Conveyor Belt
Cross section structure
V-Cleat Belt Dimensions
▲ V-Cleat Conveyor Belt
Features
Applications
Features
Conveyor belt
1. There is no bottom cover rubber on the belt so the coefficient of friction is less, and it is suitable for use on table runs.
2. The mesh pattern of the top cover rubber cushions impact, alleviates vibration and prevents slippage.
3. Inclined conveyance up to 30° is possible, depending on the items transported.
1. Inclined conveyance of lightweight goods and packages.2. Conveyance of breakable items (bottles, etc.) and items that might easily slide on an incline.
Note 1: Unsuitable for oily goods.Note 2: Not for use with powders.
1. Inclined conveyance of granular materials up to 50mm diameter, with large coefficient of friction on the top surface.
2. Inclined conveyance of low-load goods, such as soft packaged goods.Note: Not suitable to convey sticky substances as the recessed structure is difficult to clean. (Unable to
directly apply cleanser due to the belt surface shape.)
1. Inclined conveyanceInclines up to 30 degrees, depending on the goods being conveyed. Suitable for the conveyance of unbagged gravel and sand, bulky goods and bagged goods.
2. Safe, with few dropsGoods being conveyed naturally gather at the belt center due to the cleat shape, which prevent goods from falling.
3. The cleats are vulcanized, and cure at the same time as the belt, so there is no cleat separation.
4. Noise due to vibration is reduced because the cleat angle pitch is designed so that the cleats wrap onto the return roller.
Package Belts are used to transport goods on inclines. A mesh pattern is inscribed into the top cover rubber to prevent the collapse or spilling of items conveyed. The special pattern also cushions impact and alleviates vibration, so the belt is suitable to convey breakable items.
V-Cleat Conveyor Belts are designed for inclined conveyance. The unique shape of the cleats on the top cover rubber stabilizes the goods being transported and prevents spillage. V-Cleat Belts are effective in preventing load spillage and drops in inclined conveyance, as well as for the transport of granular materials.
8 9
300
350
400
450
500
600
650
700
800
900
1000
1200
1400
1600
1050
750
60N80N60N80N60N80N
100N120N
60N80N
100N120N
80N100N
120S
80N100N
120N
120S
120N
120S100N120N
120S
160S
120N
120S
240S
100N
120S160S100N120N
160S200S120S160S200S120S160S200S
240S
120S
300ES400ES
120S160S200S
240S280S300S
160S200S
240S280S
280S300S
300ES400ES
200S
300ES400ES
300S
160S200S240S280S
55755575557590
110557590
110
7590
7590
110
110
110
110
11090
110
110
140
110
110
220
90
110140
90110
140180110140180110140180
220
110
280360
110140180
220260280
140180
220260
260280280360
180
280360
280
140180220260
120200150250
280400260400210350360500340500290450390550340500320500440600420600370550470650420600400600
450
530
750510750610
850
640
900
750
930
910
850
1050
1000
800
1050
590850
7701050
660900
700700
650
180300
200
300
230
350
400
500
600
700
700
700
800
800
800
800
900
800
900
900
900
900
1000
100
110
0120
0120
0
130
0
150
160
170
200
200
200
200
0
1300
1400
1200
150150
0
600
50
0
60
0
Types and applications
Types of rubber Applications Major transferred goods
Standardproducts
Heat-resistantproducts
Oil-resistantproducts
Flame-retardantproducts
S-shaped L-shaped Reverse L-shaped I-shaped
Major line shapes
Required space
Ordinary conveyor line
Flexowell®
S-shaped line
Space that can be saved
Space saving
■ Combination types (Types 1, 2 and 3 are standard)
Type 1
Type 2
Type 3
Flame-retardantand oil-resistant
products*
Transportation of oily goods (highly oil resistant)
Coal-fired power stations, etc.
Bulk waste disposal sites, etc.(waste crushing facilities) Coarse refuse, etc.
Coal and others
■ Standard combination
Belt cross section
Flexowell® Belts are made up of the main body belt, wave-shaped sidewalls and horizontal cleats. The three components are rigidly cold-bonded by mechanical means. Please consult with us, as various combinations are available, depending on the items conveyed, volume and the angle of inclination.
Wave-shaped lug cleat
Horizontal cleat Free zone
Main belt
Belt width Sidewall height Horizontal cleat height Effective width Free zone widthIn mm
Special horizontal cleats and wave-shaped sidewalls enable Flexowell® Belts to convey at angles up to 90° (vertical). Capital investment savings due to substantially reduced facility space, with high efficiency. The simple structure allows for easy maintenance and contributes to reduced running costs.
Flexowell® is a registered trademark of ContiTech Transportbandsysteme GmbH; used by permission.
Conveyor belt
Transportation of loose materials and powders
Transportation of high-temperature goods(Intermediate heat-resistant transportation with the temperature of transferred goods not higher than 100°C and the belt surface temperature not
higher than 70°C)
Sand, gravel, crushed stone, iron ore, sintered steel, steelmaking auxiliary materials, granulated slag, steel shot, wood chips, pulp, used paper, clay, cement, bricks, tile raw materials, cullet, glass raw materials, grain, fertilizers, coal, and coal ash
Coke, molding sand, mesalite ore, sulfur, pellets, cement clinker, sintered steel, glass raw materials, and cement
Settled sand, dewatered sludge, scum, municipal refuse, paper making sludge, punched steel sheets, animal skin, grain, and animal feeding stuff
* Fire prevention measure at bulk waste disposal sites. Used in steep-incline crusher lines.(Flame resistance performance equivalent to products passing JIS flame resistance test.)
Features1. Space saving
Vertical conveyance substantially saves space compared with conventional conveyor facilities.
2. Freely design conveyor line anglesEasy to design the required conveyor angle, from flat to steep incline, depending on the facility layout.
3. High capacity conveyanceSignificantly improved cross-section area, with dramatically increased load capacity compared with trough conveyors.
4. Reduced facility costsSmall pulley diameters may be used, without the need for skirt boards. Facility costs are reduced with flat rollers.
Structure
Components
Type 1: No free zone, no horizontal cleatsFor lines with 0-16° inclinations, without angle change in conveyance.
Type 2: No free zone, with horizontal cleatsFor sharp inclines, without angle change in conveyance.
Type 3: With free zone and horizontal cleatsFor sharp inclines, with angle change(s) in conveyance.
Type 4: With free zone, without horizontal cleatsFor lines with 0-16° inclinations, with angle change(s) in conveyance.
* Standard effective widths of ES types are available in multiples of 100mm.
* We can design and manufacture large-capacity non-standard belts, with various widths and strengths. Please contact us.
Flexowell® Conveyor Belts(for steep-incline conveyance)
10 11
P′
PE′
PB′
PW′
P′′′
Pv
P′3.3%
PW′1.4%
P′′′0.9%
Pv23.4%
PE′70.6%
PB′0.4%
100
50
Bando Eco-Carry™ (energy-saving conveyor belts)Global efforts are now being made to conserve energy and reduce CO2 emissions to protect the world’s environment. These efforts are very important to us at Bando. Bando Eco-Carry™ was developed to meet customer needs for reduced costs for electricity associated with conveyor operations. Bando Eco-Carry™ conserves energy and contributes to reduced CO2 emissions. Bando develops environment-friendly belts, and consistently remains at the forefront of global conveyor technology.
Applications
Features
How are energy savings achieved?
We provide energy conservation analyses.
Factors in Running Resistance
Roller rotational resistance
■ Total resistance in conveyor belts (Segmentation calculation/Hannover University)
Total resistance13,319.88 (kg)
Belt width = 1400 mmQuantity transferred = 4450 t/hBelt speed = 180 m/minHorizontal machine length = 686 mLift = 7.1 m
Calculation assumptions
Verification of Energy Savings
Conceptual diagram of rolling resistance Rolling resistance test results
Core body
Bottom coverrubber
LoadTop cover rubber
Energy loss occurs when the conveyor belt passes over the roller. Minimizing this energy loss results in energy conservation.
Rollingresistance
Conventionalproduct
Eco-Carry™
Roller
Energy Saving Performance
FEM analysis Evaluation of actualmachinery in the fieldIn-house evaluation
Materials designStructural design
FEM analysis Evaluation of actualmachinery in the fieldIn-house evaluation
Materials designStructural design
Output
Strain energy density distribution
Enlarged view
1. Energy-savings (reduced electricity), contribution to reduced CO2 emissionsEffective energy savings in the drive motor due to reduced rolling resistance.
2. No modifications to existing facilitiesExisting facilities do not require modification when switching to Eco-Carry™ belts.
3. Secure operationsThe safety factor is increased with Eco-Carry™, as it has the same strength as conventional belts, with reduced power requirements.
Steelworks, cement, limestone mines, paper mills, electric power, etc.
Canvas conveyor belts are used for short runs and steel cord conveyor belts are used for long runs.(Please contact Bando for details.)
Among the various resistances encountered by the belt as it runs, resistance over the rollers is the greatest. Reducing rolling resistance was our key point in developing Bando Eco-Carry™. Our research into belt materials and construction resulted in reducing rolling resistance by 50%. Reduced rolling resistance → reduced power required by the conveyor → reduced power consumption by the motor → contribution to reduced CO2 emissions
A theoretical analysis of energy savings is conducted using FEM, along with in-house testing and an actual field evaluation of the equipment in use.
We would be happy to conduct a simulation based on your usage conditions to calculate expected energy savings.
Types
Conveyor belt
Resistance due to belt sagging before and after the belt passes over the roller (rolling resistance)
Sag resistance caused by belt bending vibration
Resistance caused by belt bending
Resistance due to lift
Belt slack caused by material loadAttention to
this resistance
Reduces rolling resistance here
* Values expressed are indexes based on in-house testing.
Energy conservation (reduced power consumption) is in the following ranges compared with conventional belts:• Canvas conveyor belt: 3–10%• Steel cord conveyor belt: 7–30%* Energy savings vary depending on individual conveyor belt line requirements (machinery length, incline, line shape, etc.)
12
200±
3045
±5
0–10
45°
13
70 60175142
41405165
2 12225
50486698
−3−5 10 6
Oil-resistant 300
× 100
Flame Resistant Conveyor Belts Oil Resistant Conveyor BeltsFlame resistant conveyor belts use special self-extinguishing compounds and chemicals in the rubber. These belts comply with JIS K 6324-1994, grades 2 and 3.• Wear-resistant grade (equivalent to JIS S)......FR300J• Ultra wear-resistant grade (equivalent to JIS A)......FR300T (Please contact us for information regarding JIS K 6324 grade 1 compliance and non-Japanese standard compliance.)
If ordinary belts are used to convey goods containing oil (mineral, animal or vegetable oil), the oil causes swelling in the cover rubber, offset, meandering or reverse warping may occur. The belt may become disabled or service life may be shortened. We recommend oil-resistant conveyor belts even if only a small amount of oil is present in the goods being conveyed.
Applications
Conveyor belt
●Burn duration testAdjust the burner to obtain an inner flame length of 45 ± 5mm and an outer flame length of 200 ± 30mm. Tilt the test piece at 45 degrees, and set it so that the lowermost end of the test piece comes to a position 0 – 10mm from the uppermost end of the inner flame. After exposing the test piece to the flame for 45 seconds, remove the flame, and measure the time the test piece continues to burn.
●Re-combustion testAfter removing the flame in the burn duration test, wait 60 ± 10 seconds, and use a blower to expose the test piece to a wind speed of 1.5m/second in the direction shown at right to examine the re-combustibility of the fire.
Note: Adjust wind speed in advance using a portable anemometer.
* Use LP gas (Type 1, No. 1) for the flame, as specified in JIS K 2240.
Mines, steel mills (blast furnace), coal, people-movers, grain and petroleum terminals, and hazardous (flammable) materials conveyance
Example of use
Flame resistancetesting method
In compliance with JIS K 6324( )
Item
Burn duration
Re-combustion
Types of rubberconveyor belts
(Reference)
Flame resistance grade
Grade 3Grade 2
No re-combustion on any of the test pieces.
Fabric conveyor belts, steel cord conveyor belts
Oil-resistant 110 blackOil-resistant 130 white
Oil-resistant 210 blackOil-resistant 230 whiteOil-resistant 240 green
Oil-resistant 220 black
Oil-resistant 300
Oil-resistant 310 blackOil-resistant 330 whiteOil-resistant 340 green
CR(Chloroprene)
Oil-resistant 300 belts in made-to-order colors.
NBR(Nitrile)
NR+NBR(Natural rubber plus nitrile)
PVC+NBR(Vinyl chloride plus nitrile)
PVC+NBR(Vinyl chloride plus nitrile)
Kind of rubberType Major features and applications
Soybean oilAnti-corrosive oilWhale oilVolatile oil
JIS-G Oil-resistant 110 Oil-resistant 210 Oil-resistant 220
(Weight in the air after immersion – weight in the water after immersion) – (weight in the air before immersion – weight of the water before immersion)
Weight in the air before immersion – weight of the water before immersion
Volume change rate (%) JIS K 6258-1993
Volume change rate (%)Condition: Immersion at 70°C for a week
Original thickness
Outer flame
Inner flame
Burner tinderInside diameter: 11 ± 1
Burner(Movable)
Test piece(Fixed)
About
200
About25
(In mm)
(JIS K 6324)
Wind direction in the re-combustion test
Flameresistance
grade
The total burn duration of six test pieces of cover rubber not to exceed 45 seconds and the burn duration for any one of the six test pieces not to exceed 15 seconds.
Average burn duration for three test pieces of cover rubber not to exceed 60 seconds.
Types andapplications
Oil resistancetest examples
Conveyorbelts for grains
Well-balanced mechanical properties with light resistance to oil. Used in applications where these features are required or where light resistance to oil and moderately high heat resistance are required.
Highly resistant to aromatic solvents (benzole, toluene, etc.), halogenated hydrocarbons, ketones, vegetable and mineral oils, except esters. Used in applications where large amounts of oil are present.
Used in applications where high oil resistance is required, or in the light-duty conveyance of not-ready-to-eat foods that directly contact the belt. Standard belts have one side white and the other side green.
Note: For problematic applications, such as those involving mixed oils, the proper belt will be determined after examining the previous belt(s) test samples, and oil resistance testing.
Greater cold resistance than other belts, with mild oil resistance. Suitable for the conveyance of wood chips, frozen fish and grains.
* Grain-oil-resistant SBR-base belts are most suitable to convey grains (wheat, soybeans, corn, etc.). However, we recommend Oil-resistant 210 for the conveyance of crushed or granulated grains. Please contact us for additional information.
14
00 1 2 3 4 5 6 7 8
5
10
15
20
00 1 2 3 4 5 6 7 8
70
40
30
20
10
60
50
0
40
20
60
80
100
120
140
FR450M
10090
80
110
120130
140
150160
15
B CA400500630720800
1000100012501500
222323233
6.0×3.0Up to 1400Up to 1400Up to 1800Up to 3000Up to 1800Up to 3000Up to 1800Up to 3000Up to 3000
400400550600650800800950
1150
350350450500550650650800
1000
300300400450450550550650800
100 120 140
(#500/3P)
100 200 300 400
(#500/3P)
We developed a cover rubber for FR-450M that adds the feature of high oil resistance to conventional flame resistant belts. These belts are a fire prevention measure used in oil-contaminated conveyance in mines, refuse disposal facilities and sewage treatment plants. Additionally, longer belt service life can be expected due to measures taken to counter swelling in the cover rubber.
Impact Resistant Rock Belts™
Rock Belts™ were developed for conveyor runs exposed to large impact. A special woven structure is used in the core body canvas, designed in consideration of impact to the cover rubber and core body. Rock Belts™ are ideal for lines with high impact force that shortened the service life of traditional belts.
Conveyor belt
Applications
Features
Performance
Applications
Structure
Performance
Evaluation data
1. Oil immersion resistance tests (JIS-K6258-2003)
3. JIS Flame resistance test (JIS-K6324-2013)
2. Cover rubber wear resistance, tensile strength
● Result of oil-immersion resistance test at 23°C
● Result of oil-immersion resistance test at 70°C
Number of days for test
Oil type: IRM #903
Flame resistance and oil resistance standard: 11% or less after 7 days
Conventional productFR450M
Immediately after ignition 1 second afterthe removal of the burner
1 minute afterthe removal of the burner
● Wear resistance test results: DIN abrasion loss
FR450MConventionalproduct
Conventionalproduct
OriginalAging (4 days at 70°C)
● Tensile strength test results: Elongation
Grade Numberof plies
Belt strength(N/mm)
Cover rubber thickness(mm)
Belt width(mm)
Minimum pulley diameter (mm)
Rock Belt™ 0Rock Belt™ 1Rock Belt™ 2Rock Belt™ 3Rock Belt™ 4Rock Belt™ 5Rock Belt™ 6Rock Belt™ 7Rock Belt™ 8
2-ply product example
Belt cross section structure
Top cover rubber(Impact resistance, wear resistance)
Core body canvas(specially woven nylon)
Bottom cover rubber(Impact resistance, wear resistance) Core body canvas/
specially woven structure
[1] Impact resistance
Impact resistance index
Multi-ply belt NN500/4P
Rock Belt™ 1 S
[2] Tear resistance
Tear resistance index
Multi-ply NN599/4P
Rock Belt™ 1 S
A: Drive, head, drive snap, stacker bend, tripper, tripper bend, and stacker (θ > 90°)B: Tail and take-up bend (θ > 90°)C: Head snap, tail snap, take-up snap, and take-up bend (θ ≤ 90°)* Refer to pages 4 – 5 for standard Rock Belts™ 0, 1 and 2.
Made to order
1. Meets JIS flame resistance standards.2. Highly oil resistant specification (oil and wear resistance are twice those of conventional belts).
1. Treatment facilities for household waste containing oil, such as garbage and sewage.2. Oily-coke and oily-coal conveyor lines at thermal power plants and steel mills.3. Fire prevention belts in underground pits and refineries.
Volu
me
chan
ge (%
)
Number of days for test
Oil type: IRM #903
Flame resistance and oil resistance standard: 30% or less after 7 days
Conventional productFR450M
Volu
me
chan
ge (%
)
Abr
asio
n lo
ss in
dex
Elon
gatio
n in
dex
Highly oil resistant requirements applicable to FR450M
Abrasion loss is one-half compared with conventional flame resistant and oil resistant products(wear resistance doubled).
Approx. 15% improvement in physical properties after aging
Flame extinguished immediately after the removal of fire source
No re-ignition
Quarries, steel mills, paper manufacturers, mining, barges, civil engineering, other(Ideal for ore, rock crusher and timber applications)
[Features of core body canvas]Binding yarns are interwoven into the warp and wept of the canvas. The canvas excels in impact resistance and gripping resistance as it is rich in flexibility, with the warp and weft separately receiving belt stress and absorbing it.
Comparison of physical properties by belt type
Tear resistance● Tear resistance test
without the center cover according to ISO505
Standardspecifications
Stan
dard
spec
ificat
ion
Non
-sta
ndar
d
FR-450M – Flame Resistant and Highly Oil Resistant Conveyor Belts
™
™
16
0
1
2
3
4
5
6
HC1500
HC1500
HC1500
010 2 3 4 5 6 7
2
4
6
8
10
12
HC1500
17
HC-513
HC-515
HC-710
HC-770
HC-1500
HC-530
HC-795
HC-730
HC-719
Heat Carry™ – Heat Resistant Conveyor BeltsHeat Carry™ belts are a lineup of high-heat-resistant and wear-resistant belts, designed to convey high-temperature items.
Applications
Features
Conveyor belt
1. Superior resistance to wear and heat aging when exposed to heat.
2. The core body is designed to minimize performance variation under heat.
3. Superior adhesion between the cover rubber and core body when exposed to heat.
Heat Carry™-1500 has superior crack and heat resistance when belt surface temperatures are in the range of 100–200°C, so you can expect service life more than twice as long as conventional high-heat resistance belts. (Not suitable for lines where belt surface temperature are less than 100°C.
Steel mills (sintered ore, coke, pellets, slag, etc.), cement plants (clinker, cement products, compound raw materials, dry clay, etc.), other (foundry sand, etc.)
Heat Carry™ 1500 (HC-1500)
Features
PerformanceEvaluation data [1]: Crack life evaluation
Evaluation data [2]: Wear life evaluation
● Service life comparison on a foundry sand conveyor line (Belt surface temperature 260°C max.)
Conventional heat-resistant belt
2 timesConventional heat-resistant belt
Conventional heat-resistant belt
● Remaining cover rubber thickness on a sintered ore conveyor line
Service life (months)
Life of a conventional heat-resistant belt
General purpose heat-resistant belt for use in medium temperature ranges. The SBR feature in the belt minimizes hardening due to heat (heat crack generation). Suitable for conveying powders.
Special heat resistant belt, with significantly improved wear resistance, including resistance to gouging due to impact.
High temperature heat resistant belt, designed so that it is difficult for cracks to appear.
Superior wear resistance and heat aging resistance at high temperatures.
Superior wear resistance and heat aging resistance at high temperatures.
White belt for use on lines averse to contamination of the items conveyed.
White belt for use on lines averse to contamination of the items conveyed.
Improved wear resistance at high temperatures. Ideal for lines with short service life due to wear.
Almost no belt hardening or softening, even at high temperatures. Ideal for use in cylindrical conveyors.
• Sintered ore products: Belt surface temperature 100°C or less
• Coke: Belt surface temperature 100°C or less
• Clinker: Belt surface temperature 100°C or less
• Sintered ore products: Belt surface temperature 100°C or less
• Coke: Belt surface temperature 100°C or less
• Clinker: Belt surface temperature 100°C or less
• Sintered ore products: Belt surface temperature 180°C or less
• Coke: Belt surface temperature 180°C or less
• Clinker: Belt surface temperature 180°C or less
• Clinker (best-suited):Belt surface temperature 180°C or lower
• Dried clay, dried lime:Belt surface temperature 180°C or lower
• Sintered steel pellets: Surface temperature 200°C or lower
• Coke:Surface temperature 200°C or lower
• Clinker:Surface temperature 200°C or lower
• White cement, chemical fertilizers, and titanium:
Belt surface temperature 100°C or less
• Sintered steel, coke, clinker, and the like:Lines with a service life of less than 2 years that have short machine lengths and cycle timesBelt surface temperature 180°C or lower
• White cement, chemical agents, fertilizers, resin raw materials, and the like:
Belt surface temperature 120°C or lower
• Cylindrical conveyors, etc.
Type FeaturesTemperaturerange
Temperature ofthe objects beingtransported (°C)
Allowable beltsurface
temperature (°C)
Major applications(Belts can be used in applications
other than those listed below.)Powder: up to 150Bulk: up to 200
Powder: up to 150Bulk: up to 200
Powder: up to 180Bulk: up to 400
Powder: up to 180Bulk: up to 450
Powder: up to 180Bulk: up to 450
Powder: up to 180Bulk: up to 300
60–150
Powder: up to 200Bulk: up to 450
Powder: up to 150Bulk: up to 200
Up to 180
Up to 100
Up to 100
Up to 180
Up to 180
Up to 180
Up to 120
Up to 200
Up to 100
Types and features of Heat Carry™ products
Serv
ice
life
(mon
ths)
Rem
aining
thick
ness
of t
he c
over
rubb
er (m
m)
Medium temperature range applications
High temperature range applications
Specific applications
Heat resistant belt selectionThe temperature of the items being conveyed and belt surface temperatures are important considerations, as well as atmospheric temperatures. Powder affects belt performance differently than bulk in terms of temperature. Please contact us to select the best belt for your needs.
18
●Cord type aramid canvas ●Woven type aramid canvas
100
90
80
70
60
50
40
30
20
2 4 6 8 10 12 14 16 18 20
Belt strength N/mm Standardsafety factorBelt width mm Belt width mmBelt strength N/mm Standard
safety factor 630 8001000125016002200
400 – 1500400 – 1500400 – 1500400 – 1300400 – 1300400 – 1200
888888
630 800100012501500
800 – 1400800 – 1400800 – 1400800 – 1200800 – 1200
88888
●Cord type ●Woven type
19
Top cover rubber
Bottom cover rubber Canvas reinforcement
Steel belt
Aramid belt
Nylon belt
Polyester belt
Aramid canvas(cord or woven)
Elasticity performance of aramid canvas
Applicable cover rubber typeOrdinary JIS (S, G, A, L, D, H), flame-retardant, heat-resistant, oil-resistant, ultra wear-resistant
Applicable cover rubber typeOrdinary JIS, ultra wear-resistant
Conveyor belt
The core body canvas in aramid conveyor belts is characterized by high strength and high elasticity, which enables aramid belts to replace steel cord conveyor belts.
In a cable conveyor system, the belt “rides” on two wire cables on either side of the belt. The cable and belt move together at the same time, driven by carrier and return pulleys. Suitable for long distance conveyance.
Applications Applications
Features
Features
Structure
Beltspecifications
1. Extended service life as the core body remains rust-free.
2. Reduced belt weight.3. Little belt elongation.4. Improved gripping resistance and impact resistance.5. Improved longitudinal tear resistance.
1. Long distance conveyor belts – for conveyor runs exceeding about 300m.
2. High strength conveyor belts – 630N/mm to 2200N/mm.
3. Ultra-low elongation conveyor belts.
The cables are tensioned, so the belts are suitable for long distances. There are lines in Japan that run 3000 – 6000m; runs overseas can reach up to about 10 kilometers.
1. Rubber projections, called shoe rubber, are built into both sides of the belt on the top and bottom surfaces. The wire cables run below the shoe rubber.
2. Steel bars are built horizontally into the belt core to support the load.3. Additionally, fabric reinforcements above and below the steel bar cores help to distribute load,
and function to transmit driving force from the cables to the belt.
Structure
Belt strength, belt widths and safety factors
Performance
Load
(%)
Elongation (%)
Cable Conveyor Belts
Shoe rubber
Shoe rubber
Canvas reinforcement
Steel core
Top cover rubber
Bottom cover rubber
Example of use
Cross-sectional view
LoadBelt
Cable
Side view
Carrier side pulley
Line stand Return side pulley
Direction of the belt
Aramid Conveyor Belts
20
Belt width
21
EP250/35.0×1.5
EP500/35.0×1.5
EP500/35.0×1.5
EP500/35.0×1.5
(In N)
10000 20000 30000
EP250/35.0×1.5
EP500/35.0×1.5
EP500/35.0×1.5
EP500/35.0×1.5
50% 100%
EP250/35.0×1.5
EP500/35.0×1.5
EP500/35.0×1.5
EP500/35.0×1.5
Top cover rubber
Core body
Steel cord
Bottom cover rubber
Structure
1P 2P 3P
Edge rubber
Conveyor belt
Type-6 and Type-6BWith increasingly larger facilities using continuous conveyor lines, potential loss due to a ripped belt has increased, including a potential factory shutdown to repair or replace belts to restore operations. Rip resistant belts are suitable for use on remotely controlled conveyor systems, in which a gouge to the belt may cause the entire circumference of the belt to rip.
Applications
Features
Structure
1. Superior rip resistance2. Superior impact resistance, with effective impact absorption3. Superior gouge resistance and mitigation4. Improved belt durability reduces costs5. Reduced maintenance
1. Type-6 steel cords become exposed, and metal fragments mix into the load being carried.2. Lines using metal detectors and magnetic pulleys.3. Items being conveyed come into contact with the steel cord and the load is rejected after inspection.
Steel cord (Type-6) or aramid cord (Type-6B) are embedded, in the width direction at constant pitch, between the core EP canvas and the top cover rubber. This enhances gouge protection, which is a cause of belt ripping, and strengthens rip resistance.
Structure of Rip Resistant Belt Type-6(steel cord embedded)
Rip Resistant Belt Type-6B selection criteria
Structure of Rip Resistant Belt Type-6B(special aramid cord embedded)
●Lines conveying sharp objects where belts may be easily gouged.
Examples●Cullet conveyance in glass plants●Burr conveyance in foundries●Pressed steel conveyance in machinery plants●Slag conveyance●Bulk waste disposal sites, crusher lines
●Lines containing foreign matter, such as steel or iron pieces, which tend to cause belt rips
Examples●Cargo unloading lines●Bulk materials receiving yards●Mine feeder belts
Structure
Ordinary
Ordinary
Rip resistanceBeltspecification
(Severed after 3 times)
(Severed after 14 times)
Rip Resistant Belt Capabilities
Vertical tear resistanceRip Resistant Belt Types 6 and 6B have remarkable lateral reinforcement, with resistance 2.5 – 3 times more effective than belts without such reinforcement.
Lateral reinforcement is remarkably effective. Type-6, with stronger reinforcement that Type-6B, is best suited to large bulk conveyance exposed to large impact force.
Note: Type-6 is stronger against knife-edge foreign matter.
Rip Resistant Belt Type-6
Rip Resistant Belt Type-6B
Impact conditions Core body strength retention rateImpact resistanceBelt
specification
Impact resistance
●Drop height0.96 m
●Impact: 100 times
●Impact weight(knife-edge shaped)15 kg
Belt width
Rip Resistant Belt Type-6 and Type-6B
Top cover rubber
Core body
Special aramid cord
Bottom cover rubberThe effect of lateral reinforcement and the resistance and mitigation effect against gouging is substantial. Ideal for the conveyance of materials prone to gouge, such as cullet, cast burrs, pressed steel sheets, etc.
Ordinary
Ordinary
Rip Resistant Belt Type-6
Rip Resistant Belt Type-6B
Ordinary
Ordinary
Rip Resistant Belt Type-6
Rip Resistant Belt Type-6B
Conditions Depth of flaw
Top c
over
rubbe
r
Reinf
orced
laye
r
Botto
m co
ver ru
bber
Seve
r
Sticking resistanceStructure Belt
specification
Gouge resistance
●Drop height1.54 m
●Single impact●Impact weight
(knife-edge shaped)15 kg
Rip Resistant Conveyor Belts
22
100
150
200
250
300
Ply ×Top
cover(mm)
Bottomcover(mm)
400
600
780
1000
1100
100 125 160
125 160 250 315
160 250 315 400
250 315 400 500
315 400 500 630
2P × 3.0 × 2.0
2P × 3.0 × 2.0
2P × 3.0 × 2.02P × 5.0 × 2.02P × 3.0 × 2.02P × 5.0 × 2.02P × 3.0 × 2.02P × 5.0 × 2.0
6.5
8.4
9.110.910.011.811.412.5
θ° θ°
θ°R
R
23
Diameter
D
B mm D mm
Crosssection area
40m/min 60 80 100 120 140 150 160 180 200 220 250
600750900
1,0501,2001,6001,8002,000
150190230275320430485530
1.4162.2723.3294.7596.444
11.68514.80217.676
34.054.579.9
114.2154.7279.2355.2424.2
51.081.8
119.8171.3232.0418.9532.8636.3
68.0109.1159.8228.4309.3558.5710.5848.4
85.0136.3199.7285.5386.6698.1888.1
1060.6
102.0163.6239.7342.6464.0837.7
1065.71272.7
118.9190.8279.6399.8541.3977.3
1243.41484.8
127.4204.5299.6428.3580.0
1047.21332.21590.8
135.9218.1319.6456.9618.6
1117.01421.01696.9
152.9245.4359.5514.0696.0
1256.61598.61909.0
170.0272.6399.5571.1773.3
1396.21776.22121.1
186.9299.9439.4628.2850.6
1535.81953.92333.2
212.4340.8499.4713.9966.6
1745.32220.32651.4
4050607080
110120140
7080
100120140200220240
Rh
OhRV1 RV2
OV
R
Example of use
Conveyor belt
The edges of Cylindrical Conveyor Belts come together using seal rollers. Maintenance is easy and there is no belt rolling or snaking.
ApplicationsApplicationsFeatures
Features
Structure
Structure
Standardspecifications
Standard specifications
1. Enclosed conveyance. Cylindrical conveyance prevents scattering or spillage of items conveyed, and foreign matter contamination is not a concern.
2. Curved and steep incline conveyance. The belts are capable of vertical and lateral rotation at specified curvature radii. They are also capable of inclined conveyance at angles 10 – 20% greater than conventional conveyor belts.
3. Safety and economy. Complex adjustments due to snaking are unnecessary as the belt safely runs on a predetermined course. Excellent economy, as machine length can be shortened.
●Boilers (coal, coke, ash)●Steelworks (slag, de-siliconizing agents, coal pellets)●Paper manufacturers (woodchips)●Cement●Chemicals (fertilizers, chemicals)
●Foods (oil refining, milling materials)●Feed (raw materials, finished products)●Powdered substances, pellet-shaped materials
Example of use▼
●Boilers (coal, coke, ash)
●Steelworks (slag, de-siliconizing agents, coal pellets)
●Paper manufacturers (woodchips)
●Cement●Chemicals (fertilizers, chemicals)
●Foods (oil refining, milling materials)
●Feed (raw materials, finished products)
●Powdered substances, pellet-shaped materials
1. Enclosed conveyance.2. No spillage as the return side is also enclosed.3. Inclined and curved conveyance on a single conveyor
(rather than using 2 – 3 lines.)4. Little noise and vibration, along with the first two features
above, make pipe conveyors environment friendly.5. General purpose, heat resistant, flame resistant and oil
resistant specifications are available.
Roller panel
Circular retentionroller
Belt cross section
Torsion-preventionroller
Pipediameter(φmm)
Belt width(mm)
Belt strength(N/mm)
Belt weight(kg/m2)×
Radius ofcurvature
Radius allottedangle
Range in which curved travel is allowed (R)
R = 300 × pipe diameter (φ)
45° or less
1. Horizontal radius of curvatureRH = Belt inside diameter × 100 or more
2. Maximum bending angleOh = 90°
Circular retentionroller
Torsion-preventionroller
Canvas
Special rubber layer
Bottom cover rubber
Top cover rubber
Note:Please contact us for products with a pipe diameter of 350 mm or more.
3. Vertical bending radiusRV1 = Belt inside diameter × 200 or moreRV2 = Belt inside diameter × 150 or more
4. Maximum inclination:Ov = about 30°
Belt insidediameter
Beltwidth
Transportation capability by belt speed Q = 60 • A • V [m3/h] Maximum dimensionof bulk mm
Grain sizeuniform
80%fine grains
×10-2
A m2
Plane Ground
Specialcanvas layer
Press roller
Seal roller
Support roller
Strengtheninglayer
The shape retaining effect of various rollers makes the cross section cylindrical.The edges are brought together and the load is carried in a sealed enclosure.
Pipe Conveyor Belts are environment friendly, as the items being conveyed are enclosed, preventing spillage and dust. Curved conveyance is also possible.
Pipe Conveyor Belts Cylindrical Conveyor Belts
24 25
(In mm)
30 m/min40 m/min50 m/min
706 mm600 mm
3,600 persons/hour4,800 persons/hour6,000 persons/hour
1100 mm1000 mm
7,200 persons/hour 9,600 persons/hour12,000 persons/hour
0–15°270 kg/m2
732.51100732.51100
ST−630ST−630ST−800ST−800
8×38×38×38×3
Example of use
Conveyor belt
Shot Blast Conveyor Belts
Result: Reduced failure and increased service life
Result: Increased service life
Result: Reduced failure and increased service life
Result: Increased service life
Applications
Features
Features
Belt size
Structure
Applications
Structure
Beltspecifications
1. High rigidity in the direction of belt width.There is little flex in the middle of the belt, even in forward-reverse operation, so there is little snaking or buckling.
2. Good flexibility in the direction of belt length.Good small pulley conformability, with superior durability and fatigue resistance.
3. Superior tear/crack resistance in the bored section of the belt.Little scratching from workpiece impact, with little crack propagation around the bore holes.
4. Superior abrasion resistance against shot and grit.
Moving Walkway Conveyor Belts have longitudinal grooves. They are flexible in the direction of belt length and rigid in the direction of belt width. The core body steel cord has little elongation, so small pulleys can be used and the belt contributes to compact conveyor systems.
1. Bando Moving Walkway Conveyor Belts have the greatest track record in Japan, with proven safety, quality and service life.
2. Reduced cost designs are possible using small pulley diameters.3. Wheelchair safe.4. Long service life reduces maintenance costs.
Plastic shot peen machines throw abrasive cleaning agents onto workpieces at high speed to remove sand from cast objects, reduce the size, remove burrs, or treat metal surfaces. They are widely used in the casting and machine tool processing industries. Endless belts play a central role in the tumbler-type shot peen machines.
Bando Moving Walkway Conveyor Belts conform to Construction Ministry guidelines. They are widely used in airport terminals, shopping centers, theme parks and hospitals.
Custom designed and manufactured to meet customer use conditions.
●How the belt is used ●Belt cross section structure
High-speed impeller
Reinforcing wire
Steel cord Bottom cover
Top cover
Cabinet
Workpiece
Shot or grit
Tail pulley200–300φ
Drive pulley200–300φ
Tension pulley200–300φ
Endless belt“Shot blast conveyor belt”
Bucket elevator
Model
Belt width Strength Unit weightCover rubber thickness Belt thickness (Standard)
Belt widthTread width
Inclination angleAllowable load
Speed
Model 800 Model 1200
About 26About 26About 26About 26
Top and bottomcover rubber Special
canvas
Core bodycanvas
Cushionrubber
Core bodythickness
25.0 kg/m37.5 kg/m28.0 kg/m42.1 kg/m
Endless Conveyor Belts for Tumblers Moving Walkway Conveyor Belts
26
450500600750900
105012001400160018002000
22223344556
22223344556
666699
1212151518
BA
B
A A
100
27
0102030354045
Non Spill L = 5000×0 Non Spill L = 5000×10Non Spill L = 5000×20Non Spill L = 5000×30Non Spill L = 5000×35Non Spill L = 5000×40Non Spill L = 5000×45
144R 101171144R 101271144R 101371144R 101471144R 101571144R 101671144R 101771
15
200
15
60
Impact absorbing material for conveyor belts
Impact Bar AR Non Spill – Conveyor belt skirt rubberUsing Impact Bar AR in place of impact rollers provides increased belt support, alleviates impact and helps to prevent belt damage. Impact rollers cause the belt to sag at the point of impact which, in turn, causes gaps in skirt rubber and leads to spillage and dust. Impact Bar AR does not rotate. The load impacts a flat surface, so there is no belt sagging at the point of impact. Use of Bando’s Non Spill skirt rubber further prevents load spillage and dust.
Features1. Effective spill and dust prevention as there is no belt sag at the point of impact (unlike rollers).2. Using rubber that is superior in impact resilience, Impact Bar AR is high in impact absorption, reducing
belt damage.3. Low frictional properties (μ=0.08 – 0.1 friction coefficient with rubber) reduces belt running resistance.4. Impact Bar AR does not rotate so it is maintenance free.5. Easy installation and replacement using aluminum clamps.6. Retractable frame type available.
Standard Impact Bar AR frames accommodate belt widths of 450 – 2000mm with trough angles of 20, 30 or 45 degrees, in place of standard roller frames complying with JISB8803-1990. We can custom design frames outside this JIS standard.
Non Spill Conveyor Belt Skirt Rubber products are selected based on the trough angle of the carrier rollers. Applications include the conveyance of:
●Cement ●Iron ore ●Coal and pulverized coal ●Crushed rock, etc.
Non Spill installation is the same as that for other skirt rubber, by making holes in it.
Non Spill Installation Points1. Use a gauge to adjust the gap to about 2mm between Non
Spill and the belt.2. The Non Spill support frame should be within 50mm of the
conveyor belt surface.(Increasing the gap will cause the skirt to sag, causing spillage or dust.)
Method of indicating
dimensions
Frame
Standardspecifications
Standardspecifications
Installation
Applications
Features
Structure
1. Effective in preventing spillage and dust in the conveyor belt chute portion.2. Prevents localized abrasion where the skirt comes into contact with the belt.3. Use of Non Spill Skirt Rubber with Impact Bar is effective against powdery substances being blown off
the conveyor.
Related Products
BAA hinge-like structure ( and above) allows for easy installation and maintenance.
Standard specification: Impact Bar AR 100 × 77 × 1500 (Product number: 144S213261)
AR type(Fixed frame)
ARK type(Retractable frame)
With fixed trough angle
Width (mm)
Height (mm)
Length (mm)
Belt width Total
Trough angle Product name Product number
Chute bodyGauge(2 to 3 mm thick steel sheet or the like)
Chute body
50 mm or less
Conveyor belt
* The standard length is 5.0 m.
●Shape ●Example of using Impact Bar AR together with Non Spill
Troughangle
28
60 ±5
60 ±5
35 ±5
11QRA13000
11QRA23000
11QRA33000
11QRA43000
11QRA53000
11QRG13000
11QRG23000
11QRG33000
11QRG43000
11QRG53000
11QRJ12000
11QRJ22000
11QRJ32000
11QRJ42000
5
10
15
20
25
5
10
15
20
25
5
10
15
20
30
30
20
15
12
70
50
30
20
15
30
30
20
15
1220
1220
1220
1220
1220
1220
1220
1220
1220
1220
1200
1200
1200
1200
≥15
≥15
≥20
≥550
≥550
≥670
≥85
≥85
≥35
≤60
≤60
≤350
HT
ST
●Canback™ is canvas-reinforced. ●Rubber Cloth is made entirely of rubber.●Buffing is required when bonding Rubber Cloth HT and ST.
29
RC- 40RC- 50RC- 60RC- 75RC- 90RC-100RC-105RC-120RC-140RC-150RC-160RC-180RC-200RC-220RC-240
M(mm)
N(mm)
D(mm)
H(mm)
300, 400450, 500
600750
800,9001000105012001400150016001800200022002400
3456789
1012131416182022
456789
101113141517192123
300400500600700800900
10001200130014001600180020002200
90010501150135015001600170018002000220023002500270029003100
410510610710810910
101011101310141015101710191021102310
350450550650750850950
10501250135014501650185020502250
42.742.742.742.748.648.648.660.560.560.560.576.376.376.376.3
157157157157160160160166166166166174174174174
141516182021222628354652576165
65
L
Wn×100
100
50 50
30 N
M
30φ15
350
H
6
200
150
36 65
Linings in light load applications, such as inside hoppers, silos, feeders and chutes, improves the environment, increases durability and reduces running costs.
It has been said that belt cleaners are only effective in the early stages of belt use, after which they need frequent adjustment. Making the most of the know-how we have obtained from belt inspection services and our design and manufacturing technology for rubber vibration isolators, Bando has developed an epoch-making belt cleaner equipped with a two-stage spring rubber system that softly scrapes the belt surface when foreign matter has weak adhesion and forcefully when foreign matter has stronger adhesion. This dramatically increases cleaning effectiveness and sustainability.
Applications Features
Features
Types and physical properties
1. Linings inside hoppers, chutes, silos, etc.2. Flat pulley linings3. Concrete mixer linings4. Use as cushioning material
1. Ultra abrasion resistant, high tensile strength, superior tear resistance, and particularly superior resistance against impact and wear.
2. Superior adhesion prevention.3. Easy installation.4. Much greater noise prevention compared with metal liners, prevents noise pollution and
improves the work environment.5. Easy disposal at the end of service life.
1. Excellent scraping effectivenessThe reactive force of the cushion rubber changes depending on the adhesive strength of the foreign matter. The tips and cushion rubber are integrated. The horizontal resilience of the cushion rubber supporting the tips is provided by a two-stage spring structure with a soft rubber layer and a rigid rubber layer. The soft layer works when foreign object adhesion is weak and both layers work when such adhesion is stronger. Cleaning is effective, with reactive force determining the tip angle.
2. Cleaning sustainabilityThe cushion rubber is compressed by metal so it retains its firmness. This, in turn, maintains tip pressure and allows for sustained cleaning.
3. Superior operational safetyThe vertically-flexible cushion rubber and tips evade belt surface unevenness to prevent belt damage. The vertical tips are unaffected by forward/reverse belt operation.
4. Superior durabilityThe hard-metal alloy tips have superior wear resistance. The material and shape are the fruit of our vibration isolator rubber design and production technology, which provide a high quality design with high reliability and durability.
Standardspecifications
Standard specifications Product number Thickness (mm) Width (mm) Standard length (m)
Canback™
RubberClothHT
RubberClothST
●The table above shows maximum widths manufactured. Widths may be joined for widths greater than those shown above.
●Please contact us for special size requirements to determine whether production is possible.* Please refer to the product catalogs for specification details and installation methods.
Belt widthW (mm)
Cleanerwidth(mm)
PipelengthL (mm)
Weightof a set(kg/unit)
Product name Product number Elongation (%) DIN wear (mm3)Tear strength (N/mm)Hardness (JIS-A) Tensile strength (MPa)
Canback™
Rubber Cloth
ModelStandard Maximum
Number of tips n
Rubber Cloth, Canback™ (Linings for inner surfaces of hoppers and chutes) RC-Ⅰ Belt Cleaner
Related Products
30
50
1
40
30
20
10
(kg)
(mm)2 3 4 5 6 7
12
2
10
8
6
4
2
(kg)
(mm)4 6 8 10 12 14
120
[1]
[4]
[2]
[4]
[3]
[6]
[5]
(A) (B)
31
98.5
P100
15
(Stro
ke)
167
.5 (
177.
5) 1
5 (Stro
ke)
167
.5 (
177.
5)
98.5
P100
148
P15065A pipe
(80A pipe)φ7
6.3
(φ8
9.1)
173
(
179.
4)
20°
SAC-Ⅱ SAC-ⅠRCC
Gap: 2–3 mm
3 98.5
10.4
98.5
10.4
167.
5(
177.
5)
Tip
SUS plate
(Hard metal)
Two-stage spring effect
Installation Cautions
Performance Features
Systematic diagrams of SAC Belt Cleaners
Tip structure(scraping section)
1. The optimum mounting position is in the range:ℓ = 100–300 mm.
2. Mount the cleaner at right angles (90°) to the belt surface.3. Position the cleaner tip so that it touches the belt surface
lightly, and tighten the bolts (SUS).4. Rotate the push-up adjustment bolt by one turn.
(The cleaner tip is pushed upward by about 1 mm to use the first-stage rubber spring.)
5. To further increase the cleaning effect, rotate the adjusting bolts by another turn.(The cleaner tip is pushed upward by about 2 mm with the tip inclined 5–10°.)
1. If the frame shows microvibration during operation, this is because the pressure on the belt surface is too strong. Immediately rotate the bolt until vibration disappears.
2. Use the cleaner normally under 70°C.3. The cleaner is not oil-resistant.
Note that oils and solvents may soften the rubber.
1. No adjustment of the cleaning tip blade (SAC-Ⅰ, SAC-Ⅱ).2. Easy and quick installation below the head pulley (SAC-Ⅰ).3. Overload avoidance mechanism prevents belt damage (SAC-Ⅰ).4. Highly effective scraping (SAC-Ⅰ, SAC-Ⅱ).5. Improved scraping sustainability (SAC-Ⅰ, SAC-Ⅱ).6. Superior durability and wear resistance (SAC-Ⅰ, SAC-Ⅱ, RCC).7. Easy, on-site component replacement, as the cleaner base has a rotating bracket.8. SAC-Ⅰ and SAC-Ⅱ are left-right symmetrical, allowing for forward or reverse operation.9. Easy selection based on the conditions of use.
The SAC Series of belt cleaners were developed from the viewpoint of conveyor belt professionals to be “belt-friendly,” maintenance-free and to improve the work environment. We have eight types of SAC Belt Cleaners and a rough-cleaning scraper (RCC) to meet your conditions of use.
SAC Belt CleanerCombination installation example
Cleaning bladespecification diagram
Install the cleaner where the belt surface is flat with little vibration.
Fig. 2 shows tip displacement in the horizontal direction of load during operation. At about 6mm the rigid, second rubber layer springs into place. Fig. 1 shows the change in the vertical direction.
[1] Hard metal alloy[2] Cushion rubber
(first stage)[3] Cushion rubber
(second stage)[4] Metal fixture[5] Frame
(for tip installation)[6] Bolt
(for tip installation)
Company A
Company A
Spring characteristicsVertical direction
Spring characteristicsHorizontal direction
Company B
Bando
Bando
First-stage spring
(soft)
Seco
nd-st
age s
pring
(rigi
d)
Load
Load
Displacement
Displacement(Fig. 2)
Load
Load
(Fig. 1)
Company B
(Mounting position) Traveling direction
●SAC-Ⅰ(Head type: installed directly below the head pulley)
Overall assembling diagram RemarksCleaning blade specification
Standard
High-speed/large-width
Standard
High-speed/large-width
Ordinary
Ordinary
Ordinary
Heat-resistant,oil-resistant
Heat-resistant,oil-resistant
Dust cover(Tip tracker type)
* Dimension in parentheses (XXX) applies to the high-speed/large-width type.
SAC-Ⅰ (with automatic tip tracking and overload prevention mechanism)
(Tip tracker type, overload avoidance
mechanism)
(Rough-cleaning scraper, fixed tip
type)
●SAC-Ⅱtype (Return type: a type of cleaner that is mounted between the head pulley and the snap pulley)
●RCC type (rough scraping type)
Specification Type
Dust cover
Heat-resistant, oil-resistant specification
RCC (ordinary specification only)* Mount the belt cleaner with a gap of 2–3 mm created between the belt and the tip.* Dimension in parentheses (xxx) is for a large-width type.
* Dimension in parentheses (XXX) applies to the high-speed/large-width type.
• Automatic tip tracker• Overload avoidance
mechanism (with side spring)
• Dust cover• Bracket rotation
mechanism
Overall assembling diagram RemarksCleaning blade specification
High-speed/large-width
Standard/high-speed
Standard
High-speed/large-width
SAC-Ⅱ (Automatic tip tracker belt cleaner)
• Automatic tip tracker• Dust cover• Bracket rotation
mechanism
Overall assembling diagram RemarksCleaning blade specificationSpecification Type
Standard
Large-width
RCC (Belt cleaner equipped with a rough scraping tip fixing mechanism)
• Fixed tip• Bracket rotation
mechanism
Ordinary specification
Tip
RubberUpper andlower springs
Guide cover
Shaft
Upper and lowertracking stroke15mm
Upper and lower trackingstroke 15mm
167.5 standardspecification(177.5)
(Hard metal)
Specification Type
* Dimension in parentheses (XXX) applies to the high-speed/large-width type.
* Dimension in parentheses (XXX) applies to the high-speed/large-width type.
RC-Ⅰ Belt Cleaner SAC Belt Cleaners
Related Products
32
SAC-Ⅰproducts
Standard Dimensions
●Table of dimensions(Standard/high-speed, large-width/oil-resistant, heat-resistant specification)
QBelt widthChute width
(H)Shaft length
(O)Weight
(kg)Applicable specificationNumber
of tips(n)
In mm
●Table of dimensions(Standard/high-speed, and large-width specifications)
QBelt widthChute width
(H)Shaft length
(O)Weight
(kg)Applicable specificationNumber
of tips(n)
In mm
●Table of dimensions(Standard/high-speed, large-width/oil-resistant, heat-resistant specification)
QBelt widthChute width
(H)Shaft length
(O)Weight
(kg)Applicable specificationNumber
of tips(n)
In mm
500
600
750
900
1050
1200
1400
1600
1800
2000
600 or more to less than 850
700 or more to less than 950
900 or more to less than 1150
1050 or more to less than 1300
1150 or more to less than 1400
1350 or more to less than 1600
1550 or more to less than 1800
1800 or more to less than 2050
1975 or more to less than 2225
2200 or more to less than 2450
456891113151618
760 - 985
860- 1085
1060- 1285
1210- 1435
1310- 1605
1510- 1805
1710- 2005
2030- 2255
2205- 2430
2430- 2655
135- 247.5
135- 247.5
185- 297.5
160- 272.5
160- 247.5
160- 247.5
160- 247.5
160- 247.5
197.5- 310
210- 322.5
17.6- 18.8
18.7- 19.9
20.3- 21.5
22.3- 23.5
23.4- 34.4
25.6- 37.0
27.9- 39.6
40.9- 42.5
42.7- 44.4
45.5- 47.1
○○○○○○○−
−
−
○○○○○○○○○○
○○○○○○○○○○
N H T
500
600
750
900
1050
1200
1400
1600
1800
2000
600 or more to less than 850
700 or more to less than 950
900 or more to less than 1150
1050 or more to less than 1300
1150 or more to less than 1400
1350 or more to less than 1600
1550 or more to less than 1800
1800 or more to less than 2050
1975 or more to less than 2225
2200 or more to less than 2450
4
5
6
8
9
11
13
15
16
18
1050
1150
1350
1500
1600
1800
2000
2300
2500
2700
375
375
425
400
400
400
400
450
500
500
17.1
17.9
19.3
20.8
21.6
23.4
25.1
32.6
34.4
36.6
○○○○○○○−
−
−
○○○○○○○○○○
○○○○○○○○○○
N H T
500
600
750
900
1050
1200
1400
1600
1800
2000
600 or more to less than 850
700 or more to less than 950
900 or more to less than 1150
1050 or more to less than 1300
1150 or more to less than 1400
1350 or more to less than 1600
1550 or more to less than 1800
1800 or more to less than 2050
1975 or more to less than 2225
2200 or more to less than 2450
3
3
4
5
6
7
9
10
11
12
1050
1150
1350
1500
1600
1800
2000
2300
2500
2700
375
350
375
375
425
450
400
475
500
525
21.8
22.6
25.4
27.7
29.8
32.5
36.5
43.2
46.3
49.2
○○○○○○○−
−
−
○○○○○○○○○○
−
−
−
−
−
−
−
−
−
−
N H T
75
Belt width
Belt width
Size of thechute opening
Size of thechute opening
Chute width (H)
Chute width (H)
Shaft length (O)
(90)40
40(50)100(130)
6Q Q100×P〔n-1〕=L
40(50)100(130)6
167.
5(
177.
5)15
(Stro
ke)
Sta
ndar
dsp
ecifi
catio
nH
igh-
spee
dsp
ecifi
catio
nLa
rge-
wid
thsp
ecifi
catio
n (280×180)
(280×120)
Bracket A(Equipped with a bracket
rotation mechanism)
Bracket B Bracket C Bracket D
190
160
157.
510
7.5
122.
510
7.5
122.
514
2.5
■Criteria for selecting a mounting bracket
75(90)
40
40 (50)
Q Q100×P〔n-1〕=L
40(50)
167.
5(
177.
5)15
(Stro
ke)
(280×180)
Hold-downroller
Q 100×P〔n-1〕=L
173
(17
9.4)
Gap
: 2–3
mm
(280×180)
40
90Q
4090
Gap: 2–3 m
m
20° or lss
33
Other Products
SAC-Ⅱproducts
RCC
Shaft length (O)
Sta
ndar
dsp
ecifi
catio
nH
igh-
spee
dsp
ecifi
catio
nLa
rge-
wid
thsp
ecifi
catio
n
Sta
ndar
dsp
ecifi
catio
nH
igh-
spee
dsp
ecifi
catio
nLa
rge-
wid
thsp
ecifi
catio
n
Size of thechute opening
Chute width (H)
Shaft length (O)
Size of thechute opening
1. Wear Component (Ultra wear resistant, impact resistant rubber liners)Linings for large hoppers and chutes with large bulk loads and strong impact from drops. Standards available are ML Plates (wear bar, fixed clamps), IR Plates (rubber vulcanized on steel plate) with 30 – 50mm thickness for light and medium loads, and SB Plates (all rubber) with 60 – 120mm thickness for heavy loads.
2. TB Plate Linings (for dump trucks)The elasticity of the rubber mitigates load impact and improves the work environment for drivers. The use of rubber prevents noise, adhesion, and damage to the vehicle, and it is maintenance-free. These advantages reduce costs as well as noise pollution.
3. Pulley Lagging (Conveyor belt slip prevention)The grooved surface design prevents belt slippage on drive pulleys.
4. Mill LiningsInterior linings at crusher mills with remarkably reduced weight compared with metal linings (1/7 the weight of metal liners), improved durability and safety, and noise prevention.
5. Sun Cleaner (Conveyor belt surface cleaner)Wear resistant tips together with vulcanized rubber are “belt-friendly.” Highly effective scraping and long service life.
6. Rubber Screen Rubber screen is an elastic mesh used in vibrating sieve machines to sort sizes of gravel, crushed stone, ore, limestone, etc. Medium and large sizes are available.
Detailed information about these products is available in their respective catalogs.
1. Bracket A equipped with a rotating mechanism is taken as the standard mounting bracket.2. In cases where there is no margin for a mounting bracket to be mounted, you can select from among the following brackets:
Bracket type B: Cases where no space is available in the upper section (No bracket rotating mechanism)Bracket type C: Cases where no space is available both in the upper section and in the lower section (No bracket rotating
mechanism)Bracket type D: Cases where no space is available in the lower section (No bracket rotating mechanism)
3. Mounting brackets that are mounted inside the chute are available; consult us.4. For a case that does not fall into any of the above conditions, consult us.
Legend for applicable specification: N: Standard specification; H: High-speed/large-width specification; T: Heat-resistant/oil-resistant specificationFor products with a width of 2000 mm or more, contact us.
* Please contact us about installation methods, adjustments and servicing.
Legend for applicable specification: N: Standard specification; H: High-speed/large-width specification; T: Heat-resistant/oil-resistant specificationFor products with a width of 2000 mm or more, contact us.
Legend for applicable specification: N: Standard specification; H: High-speed/large-width specification; T: Heat-resistant/oil-resistant specificationFor products with a width of 2000 mm or more, contact us.
SAC Belt Cleaners
Related Products
34 35
Maintenance
Storage and transportation During operation
While belt is stopped
Performance considerations
Belt joints
Routine inspection
During operation
Routinely inspect the belt before use, and take corrective action when needed. Contact your dealer if abnormalities continue after taking corrective action.
Inspection items
1. Belt body damage or wear
2. Belt joint separation or damage
3. Defective roller rotation
4. Accretion on pulley or rollers
5. Take-up device operation abnormality
6. Skirt or belt cleaner abnormality
7. Abnormality in the chute
8. Foreign object adherence
Repair or replace
Repair
Servicing or replace
Remove accretion
Servicing
Servicing
Servicing
Remove foreign object(s)
Remedial actions
Danger: Install safety barriers and covers to prevent any type of body contact with the belt.Danger: Do not enter areas behind safety barriers while the belt is in operation.Danger: Do not wear a necktie or items that may dangle from clothing. These items could be drawn into the belt
operation.Danger: Keep your hands and body off of the belt surface.Warning: Do not place foreign objects on the belt, particularly cigarette butts which may cause a fire.Caution: Check control panel switches and emergency stop device before operating the belt, and know the location
of emergency exits.Caution: Comply with maximum load (weight) limitations to prevent abnormal tension, which can cause malfunction.Caution: Place loads so that they do not fall from the conveyor.Caution: Install devices to detect or prevent abnormal operation, such as a reverse running prevention device, belt
tracking detector, emergency shut-off device, etc.
Danger: Do not move the belt by rolling it. This could cause serious injury or even death if someone is caught beneath the belt.
Warning: Keep the belt clear of open flames. To avoid the risk of fire, do not store near heat sources or devices producing electric sparks, such as stoves, and avoid storage near steam, oil and chemicals.
Warning: When lifting the belt, use cranes and hoists that match the weight of the belt.Caution: Store the belt at temperatures between -10 and 40°C, with low humidity levels, and avoid direct exposure
to sunlight, wind and rain.Caution: Use a stopper under the belt so that it does not roll or tip over in storage.Caution: Do not store or transport the belt on its side, in a leaning position, or in a distorted state.Caution: Use a protective cover when lifting the belt to protect the belt edges.
Caution: If you detect trouble needing maintenance, such as an abnormal sound or belt tracking, stop the belt immediately and conduct an inspection.
Caution: Do not walk under the belt or enter the area under the take-up device.Caution: Do not remove or dispose of build-up while the belt is in operation.
Danger: Turn the operating switch off and hang a tag on it indicating that the belt is “Not in operation.”Danger: Do not get on the belt or walk on it unless necessary for repairs.Danger: Do not stop the belt with hot items still on it, as there is a danger of fire.Danger: Confirm that the entire length of the belt is safe before re-starting operations.Caution: Do not wear spiked shoes if you must get on the belt for repairs.Caution: Do not allow oil, chemicals, welding sparks, or heavy or foreign objects to fall on or adhere to the belt and
cause damage.
Warning: Do not use the belt outside the ranges listed in the catalog.Examples (1) Belt performance: cover rubber performance, belt strength, adhesion performance, etc. (2) Design conditions: safety factors, pulley diameters, etc. (3) Use conditions: appropriate properties of items transported, etc.
Caution: Do not transport items having temperatures above the allowable ranges on heat-resistant belts. Heat-resistant belts are not resistant to flames.
Caution: Flame-resistant belt performance complies with JIS K6324, but may ignite depending on operating conditions.
Caution: Do not use ordinary belts for special applications requiring heat resistance, oil resistance or flame resistance. (Cover rubber performance in accordance with JIS K6322.)
Caution: Use Bando Sunline Belts for the conveyance of unpackaged foods, or in applications where rubber may come into contact with food.
Danger: Open flames are prohibited at worksites to prevent the risk of fire.Warning: During the splicing process, do not allow exposure to direct sunlight, water or dust to prevent a lowering of
adhesive strength.Warning: Ensure adequate ventilation when using rubber cement or solvents as they may pose a health risk.Warning: Do not leave rubber cement or solvents at the worksite as they cause fire.Caution: Follow manufacturer-recommended procedures when splicing belts.Caution: Use only manufacturer-specified materials when splicing belts. Also, do not use bonding materials
beyond their expiration date.
* Never touch a moving belt. It is only safe to inspect a belt after it has come to a complete stop.
Safe Usage of Conveyor BeltsAs used below, “Danger” means there is imminent risk of serious injury or death due to incorrect or improper handling; “Warning” means there is risk of serious injury or death due to incorrect or improper handling; and “Caution” means there is risk of personal injury or property damage due to incorrect or improper handling.
36
1
2
3
4
5
6
13
14
15
16
17
18
19
20
21
30
7
8
9
10
11
12
22
23
24
25
26
27
28
29
Required quality
Name
Material size
Characteristics
Temperature of the object
Ambient temperature
Belt surface temperature
Oil and chemicals
Pulley surface
Scheme
Position
Stroke
Scheme
Winding angle
Position and motor layout
User name
Machine number
Required delivery date
Required manufacturing cost
Customer’s drawings
Design of similar products: yes/no
Place of installation
Size
Pulle
yRo
ller
Chu
teDe
sired s
pecifi
cation
New
inst
alla
tion
Repl
acem
ent
Curre
nt spe
cificat
ionCu
rrent b
elt con
dition
Obj
ect t
o be
tran
spor
ted
Driv
e un
itTa
ke-u
p
Belt speed
Machine length
Head
Quantity transported
Indoors, Outdoors, Covered, Mine, Seashore
Width: Length:
Apparent specific gravity
Max. ( ) Ave. ( ) %
Sharp, dry, moist, sticky
Normal temperature: Max. ( )°C Min. ( )°C
Normal temperature: Max. ( )°C Min. ( )°C
°C; water spray Yes/No
Oil, acid, alkali ( )
ν = m/min
Actual length: ℓ1 = m ; horizontal length: ℓc = m
Upward, downward: h = m
Inclination: α = ° ; inclined section: ℓ’ = m
Qt: Max. Ave. t/h
Rubber racking, exposed (moisture: Yes/No)
Screw, counterweight, carriage, power winch
Immediately behind the drive, tail, head, in-between
mm; weight kg
For Flexowell®, enter the following dimensions.
Belt support
Belt joint
Tripper
Accessory facilities
Case where the hopper is pulled out
Working time
Head
Feeder
Cushion roller
Size
Belt strength
Rubber type
Time limit for use
Ordinary, labyrinth,
Roller junction ( )
Carrier roller width: Return roller width:
Carrier × ( ) Return × ( )
ℓC = m ℓR = m
Roller; steel sheet; roller plus steel sheet
Factory endless; on-site vulcanization; metal fittings; Sunpat
Yes unit(s) (mm high); fixing No
m, direct head: m; angle °
Yes ( ); No
Yes, pitch: m; No
Outlet width ( ); outlet length ( ); height ( )
Type Belt strength
hours/day days/year
Manufacturer name
Total quantity transported
Single, tandem-type single, tandem dual (two-shaft)
Multi
Head Head vicinityTail Tail vicinityIn-betweenOther
× unit(s)
unit(s)
180°, 200°, 210°, 220°, 230°, 240°, 360°
Other angles ( )
First
Second
KWHP
×KWHP
Alignment roller: Yes ( ); No
Skirt, scraper, turnover
State of damagePoints to be improvedOthers
Size
Coe body
Cover and other
Document submitted to:
Product delivery to:
Number of copies
Customer’s specification
Related documents
Diameter
Shape
Type
Shape/dimension
Trough angle
Pitch
Drive:Tail:Snap:
Head:Take-up:Bend:
Width :Crown:Cage-shaped:
Yes ( )
No ( )
RemarksPlease inform us of the following when placing a conveyor belt order, particularly the items in parentheses.• Issues related to odor, discoloration and toxicity of items conveyed (particularly the name and conveyance state of food
products).• Bucket elevators (bucket weight/unit, diameter and number of bolts, bucket pitch, loading method).• Belt wrappers (drawings, maximum belt strength, hydraulic force, cylinder and pulley diameters, contact angle of crown and
tension pulleys).• Gypsum board conveyor belts (surface accuracy, board types and thicknesses, mold line machine number).• Tontex-type (oil types)• Shot blast (pulley diameter, disk diameter, barrel width, processing weight, support roller (Y/N)).
• Belts with cleats or fins (shape of return roller).• Belts with fins (trough angle, fin pitch, granular size of loads).• Steep incline conveyors (load type, particle size distribution, moisture content).• Weight scale belts (weight tolerance, pulley diameter, dimensional tolerance).• Oil resistance applications (oil type and adhesive state, request for sample)• Automated lubrication of rollers (Y/N)
31
Including joint length Yes/No
Conveyor shapes, line diagrams (Be sure to describe these when points of inflection exist in the middle.) Other requests and notes
O-shaped
I-shaped S-shaped
L-shaped
Inverted L-shaped
* The numerical values shown as Type (nominal designation of belt strength) in this catalog are in SI units, expressing the strength of a belt per 1 mm width in [N]; the unit is [N/mm].The conversion between SI units and the conventional units is based on the relationship N/mm ≈ 0.1 kgf/mm; a numerical value shown in Type (nominal designation of belt strength), when converted into the conventional unit system, shows the same value.
Conveyor Belt Quality Requirements