product end-of-life disassembly instructionsh22235. · final : lamp assy. method of lamp...

EL-MF877-00 Template Revision A

Product End-of-Life Disassembly Instructions Product Category: Monitors and Displays

Marketing Name / Model [List multiple models if applicable.] HP LA2205wg Widescreen LCD Monitor Name / Model #2 Name / Model #3 Name / Model #4 Name / Model #5 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE). 1.0 Items Requiring Selective Treatment 1.1 Items listed below are classified as requiring selective treatment. 1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable.

Item Description Notes Quantity of items included in product

Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA)

With a surface greater than 10 sq cm

4 (USB, PI, IF, Driver board)

Batteries All types including standard alkaline and lithium coin or button style batteries

0

Mercury-containing components For example, mercury in lamps, display backlights, scanner lamps, switches, batteries

2 {Backlight Assembly}

Liquid Crystal Displays (LCD) with a surface greater than 100 sq cm

Includes background illuminated displays with gas discharge lamps

0

Cathode Ray Tubes (CRT) 0 Capacitors / condensers (Containing PCB/PCT) 0 Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter or height

NO

External electrical cables and cords 1 Gas Discharge Lamps NO Plastics containing Brominated Flame Retardants 0 Components and parts containing toner and ink, including liquids, semi-liquids (gel/paste) and toner

Include the cartridges, print heads, tubes, vent chambers, and service stations.

0

Components and waste containing asbestos 0

EL-MF877-00 Template Revision A

Components, parts and materials containing refractory ceramic fibers

0

Components, parts and materials containing radioactive substances

0

2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if

applicable) Description #1: Crossing Screwdriver #2 Description #2:: Description #3 Description #4 Description #5 3.0 Product Disassembly Process 3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:

1. Lay the monitor on the desk,remove the base assy with tool. 2. Remove two rubber-pads and unlock two screws which fix the base bucket. 3. Remove the bezel sub assembly with hand, and unlock two screws whick fix the OSD PCB 4. Remove the bucket with hand. 5. Pull out the light connector. 6. Unlock the four screws which fix the panel and chassis with tool 7. Disassemble FFC cable with hand 8. Unlock the 6 screws which fix the power socke, DVI, VGA connector. 9. Unlock the 1 screws fixed the bracket-USB 10. Unlock the screws for PCB assembly and chassis to remove PCB assembly and chassis 11. Remove OSD cable,USB cable and FFC cable 12. Unlock the two screws which fix the USB PCB. 13. Unlock four screw which fix the Hinge VESA 14. Remove two rubber foots and unlock four screws which fix the Base 15. Remove five rubber foots and unlock seven screws which fix the Base 16. Unlock the screw which fix the Slide rear cover 17. Unlock four screw which fix the Slide front cover and Slide cove 18. Remove the arm rear cover and unlock 4 screws which fix the stand front cover, then remove the arm front cover

19. 20.

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the product that require selective treatment (with descriptions and arrows identifying locations).

Method of lamp disassembly on LM220WE1-TLK2

Step5 : Dismantle the case top(Down)

Step 1 : Rear side view Step 2 : Unfix the screws (3 Points) Step 3 : Remove the Cover Shield

Step6 : Dismantle the case top(left/right)Step4 : Separate wires from the tape

Step10 : remove S/Main Step11 : remove the Optical Sheets

Step9 : Unfix the BL Screw Step7 : Separate Board Assy Step8 : Separate case top(push the casetop because of damages on COF)

Step12 : remove the LGP


Step14 : Separate wires from Cover bottom

Final : Lamp Assy


Step15 : Separate Lamp holder(G) fromholder Guide of Cover bottom

Step16 : Separate Lamp holde(H) from holder Guide of Cover bottom.

Step13 : Remove lamp wire tapes(left/right)

PhotoToolAction

HP LA2205wg display (INNOLUX) WEEE Disassemble Instructions report

The whole monitor

ו כ ٪ץף ףמ מ٠ וף۶٭٩ ێ ףץ٩٭ بףףףףף wwwpdffactorycomףףףףף

http://www.pdffactory.com

PhotoToolAction

Lay the monitor on the desk,removethe base assywith tool

#2 Crossing Screw Driver

ו כ ٪ץף ףמ מ٠ וף۶٭٩ ێ ףץ٩٭ ژףףףףף wwwpdffactorycomףףףףף


PhotoToolAction

Remove the rubber-pad

N/A



PhotoToolAction

Unlock the two screws which fix the bucket




PhotoToolAction

Remove the bezel sub assembly

N/A



PhotoToolAction

Remove the HP LOGO & 2 stripes

N/A



PhotoToolAction

Unlock the 2 screws which fix the PCBA

#? Crossing Screw Driver



PhotoToolAction

Remove the bucket

N/A



PhotoToolAction

Pull out the light connector

N/A



PhotoToolAction

Unlock the four screws which fix the chassis




PhotoToolAction

Pull out the LVDS cable

N/A



PhotoToolAction

Chassis assembly and panel

N/A



PhotoToolAction

Chassis assembly

N/A



PhotoToolAction

Unlock the two screws which fix the AC socket




PhotoToolAction

Remove the screw which fix the bracket-usb




PhotoToolAction

Remove the bolt which fix the DVI & VGA connector




PhotoToolAction

Unlock the five screws which fix the PI BD




PhotoToolAction

Unlock the two screws which fix the IF BD




PhotoToolAction

Pull the cable

N/A



PhotoToolAction

Chassis PCBA

N/A



PhotoToolAction

PI BDIF BDcables

N/A



PhotoToolAction

PI BD

IF BD

USB BD

N/A



PhotoToolAction

IF BD N/A



PhotoToolAction

Unlock the two screws which fix the USB BD




PhotoToolAction

USB BD & cable

N/A



PhotoToolAction

Remove the two EMI -USB parts

N/A



PhotoToolAction

EMI -USB N/A



PhotoToolAction

chassis N/A



PhotoToolAction

Remove EMI -USB

N/A



PhotoToolAction

STAND assembly

N/A



PhotoToolAction

Unlock four screw which fix the Hinge VESA




PhotoToolAction

Remove two rubber foots and unlock four screws which fix the Base




PhotoToolAction

Remove five rubber foots and unlock seven screws which fix the Base




PhotoToolAction

Unlock the screw which fix the Slide rear cover




PhotoToolAction

Unlock four screw which fix the Slide front cover and Slide cove




PhotoToolActionRemove the arm rear cover and unlock 4 screws which fix the stand front cover, then remove the arm front cover




product end-of-life disassembly instructionsh22235. · final : lamp assy. method of lamp...

Documents