product de messer
TRANSCRIPT
-
8/10/2019 Product de MESSER
1/20
MAC
HINES
ENVIRONMENT
SOFTWARE
EQUIPMENT
RETR
OFIT
SERVICE
TRAINING&APPLICATION
Product RangeMesser CuttingSystems
-
8/10/2019 Product de MESSER
2/20
2
As a company with a long tra-
dition in German engineering,we have concentrated on the
development and production
of thermal cutting machines
for over 100 years experience
which means a low level of
investment risk for our
customers.
Messer Cutting Systems has
developed from a medium
engineering company into a
global group of innovative
technical companies.
898
rankfurter Acetylen-as-Gesellschaft,
chst am Main
1903
Ernst Wiss developsthe first oxyfuel
cutting torch
1908
Market launch ofproduct range for
oxyfuel welding andcutting using the brandname Original Messer
1995
Foundation of MesserCutting & Welding, PRC
1978
MG Systems & Weldingmanufactures flamecutting machinery sold inNorth America
1911
Messer & Co. GmbH;move into US market
1932
Production of arcwelding electrodes
1945
RebuildingAdolf Messer GmbH
1970
First CNC and lasercutting system on themarket
-
8/10/2019 Product de MESSER
3/20
3
We produce cutting machines
at five locations worldwide tomeet the highest demands of
the respective metalworking
industry.
Our machines are used in all
segments of thermal cutting
and in many cases are the first,
and one of the most important,
stages in a modern production
process. Robust engineering,
modern design and innova-
tive technology are the three
cornerstones of our products.These are, through their high
quality of manufacture and
long years of experience in
application technology, part of
a unified solution for complex
cutting tasks.
Made to measure hardware
and software solutions are
complemented by the envi-
ronmental equipment around
the system and an after-sales
service, spare parts, repair and
retrofit support so that the
customer can get everything
from a one stop shop.
With our world-wide network
of branches and local partners,we are always close to you
and give you support at a con-
sistently high level of quality.
998
tefan Messerecomes member ofxecutive Board
2004/05
The Messer family,led by Stefan Messer,acquires all companyshares
2007
Messer Cutting Systemsstarts off manufacturingin Brazil
2008
Formation of manufacturing siteMesser Cutting Systems India
2000
Foundation of MEC Holding GmbHby merger of Messer Cutting &Welding GmbH with the EutecticCastolin Group
946
xpansion in Europend the US driven by
Adolf Messer
1953
Dr. Hans Messerassumes control
1965
Merger with Knapsack-Griesheim AG(Hoechst) to form Messer Griesheim GmbH
-
8/10/2019 Product de MESSER
4/20
4
MetalMasterDrop & Cut
Technical Data:
- Working widths up to 2.5 m
- Travel speeds up to 40 m/min*
- CNC controlled Z axis with the torch
lifter OL100SZ*
- Specialised for the latest precisionplasma processes
- Dimensional tolerances to DIN EN 28206
* Only with the GCplus
Special cutting system for precision plasma
processes.Simple installation drop & cut.
Dual side longitudinal drives and precision
linear guides guarantee high cutting quality
and consistency.
The plate support table, which is integrated
into the system, is divided into a number of
sections for efficient fume extraction even
with a smaller fan/filter unit.
The highly dynamic performance of the
machine is achieved through low weight
with high design rigidity.
METALMASTER
Working Width 1500 - 2500
Total Width 2290 - 3290
Working Length 3000 - 8000
Table Height 800
Overall Height 1800
Speed range 0 - 40*
all values in mm
-
8/10/2019 Product de MESSER
5/20
5
MultiThermeco
Technical Data:
- Working Widths: up to 3 m
- Travel Speeds: up to 12 m/min
- Cutting processes: Oxyfuel, dry plasma
- Marking processes: Punch marking, InkJet
Compact design, simple operation and high
flexibility that is the MultiTherm
eco
.The machine is conceived for daily work in
a standard cutting shop. The high level of
automation, simple set-up and operation
enable high productivity of high quality
parts quickly and economically.
The symmetrical wheel-housings and the
parking space for unused torches over them
optimise the working width in the narrowest
spaces. The electrical cabinet is positioned
over the wheel-housing so it is not exposed
to thermal radiation from the cut plate. It is
accessible from the side to simplify mainte-
nance and service.
MULTITHERMeco
Track Gauge 2600 3100 3600 4000
Working Width 1500 2000 2500 3000
Total Width 4070 4070 5070 5070
Length 1500 1500 1500 1500
Height 1980 1980 1980 1980
Track Height 500 500 500 500
all values in mm
-
8/10/2019 Product de MESSER
6/20
6
MultiThermVersatile and Efficient
Technical Data:
- Working Widths: up to 4 m
- Travel Speeds: up to 35 m/min*
- Working Length: unlimited
- Cutting processes: oxyfuel, dry plasma,
laser, WIPC- Equipment options: plasma bevel, oxyfuel
bevel, drilling
- Marking processes: powder marking, plasma
marking, punch marking, needle marker
OmniScript, InkJet
* depending upon machine equipment
Whether plasma (straight or bevel), multi-
torch oxyfuel cutting, laser, marking or acombination of all is your requirement, the
MultiThermis THE machine for you.
High power drives for speeds up to 35 m/min*
enable high positioning and cutting speeds
even on tight contours. The effective working
width is used to the maximum thanks to park-
ing space for heads over the wheel-housing.
Multiple torch operation for high productivity
is, of course, possible with oxyfuel, plasma
and laser operation.
MULTITHERM
Track Gauge 2600 3100 3600 4000 4600 5000
Working Width 1500 2000 2500 3000 3500 4000
Total Width 4070 4070 5070 5070 6070 6070
Length 1940 1940 1940 1940 1940 1940
Height 1980 1980 1980 1980 1980 1980
Track Height 500 500 500 500 500 500
all values in mm
-
8/10/2019 Product de MESSER
7/20
7
OmniMatMachine for special tasks
Technical Data:
- Working Widths up to 7.8 m*
- Maximum number of torches on the
machine: 16
- Optional: footplate travelling with the
machine, automatic hole piercing up to130 mm
* depending upon machine equipment
This machine has been robustly built to guide
even the heaviest units accurately. The CNCcontrolled cutting machine with a high load
gantry construction, dual sided longitudinal
drives and precision machined guide sections
offers you high cutting accuracy and shape
consistency even in 24 hour continuous opera-
tion. Whether with oxyfuel, underwater or
dry plasma, whether vertical cuts or bevels,
the OmniMatis the ideal solution for the
toughest conditions.
OMNIMAT
Track Gauge 4000 4600 5000 5600 6000 6500 7000 7500 8000 8300 8800
Working Width 3000 3600 4000 4600 5000 5500 6000 6500 7000 7300 7800
Total Width 4935 5535 5935 6535 6935 7435 7935 8435 8935 9235 9735
Length 1940 1940 1940 1940 1940 1940 1940 1940 1940 1940 1940
Height 2100 2100 2100 2100 2100 2100 2100 2100 2100 2100 2100
Track Height 500 500 500 500 500 500 500 500 500 500 500
all values in mm
-
8/10/2019 Product de MESSER
8/20
8
Technical Data:
- Cutting system with fibre laser
- Low adjustment and maintenance costs
- Low energy consumption, low running costs
- Laser class 1 because of housing
- Extremely simple- Magnetic holder to protect the cutting head
- Multiple cameras for monitoring the
machine and process on screen
With the most modern fibre laser, the unit is
at right up to date: the Laser is characterisedby a robust and long life design. No adjust-
ment is necessary right up to the cross car-
riage and the emitter diodes in the laser have
an average lifetime of over 50,000 hours. The
laser beam is carried in an optical fibre cable
through the drag chain to the cutting head,
so no beam path purging gas is required.
Because of the high efficiency of the laser and
the low gas consumption in total, the cutting
costs on the machine are kept very low.
Your entry into the Laser class
FIBERBLADE
Working Width 2000
Working Length 4000
Laser Power (W) 1200 - 2400
all values in mm
-
8/10/2019 Product de MESSER
9/20
9
LaserMatThe apex of quality
Technical Data:
- Cutting system with CO2Laser
- Highest positioning speed over the entire
working area of up to 60 m/min
- Infinitely rotating bevel unit
- Highest force deployment during acceleration- Fulfils laser class 1
With working widths of over 4 m and bed
lengths up to more than 40 m, the system ispredestined for large format plates. The CNC
controlled laser processing system offers
high part accuracy due to linear guides for
longitudinal and transverse motion. The laser
beam is guided in the transverse direction via
moving mirrors with 100% beam path length
compensation and thus ensures a consistently
high processing quality. The colour camera
which is directed at the cutting head makes
possible easy observation on the screen
alongside the operating panel.
Apart from vertical cuts, bevel cuts are possi-
ble and various marking options are available.
LaserMat
Track Gauge 4200 5000 6000
Working Width 2500 3000 4100
Total Width 5780 6580 7610
Laser power 4000 5000 6000
Length without bevelling 4460 5010 5705
Length with bevelling 4710 5260 5955
all values in mm
-
8/10/2019 Product de MESSER
10/20
10
Special Portal Machines
application and design, engineering and train-
ing, e.g. in the economical use of CNC tech-niques. Special portal machines are used, for
example in shipbuilding, the manufacture of
wind turbine towers and stone mould cutting.
Just as varied as our product range are the
tasks we are set by the different branches ofindustry. We not only supply you with cutting
machines with the latest technology and high
reliability, but also offer Know-how, support in
-
8/10/2019 Product de MESSER
11/20
11
Cutting Technologies
Laser, Plasma or Oxyfuel which process is
best suited to, and above all most economicalfor, your application?
OxyfuelOxyfuel flame cutting is the cheapest process
for the cutting of Mild and low alloy steels,
even with weld preparations.
Plate thickness range:
3 mm 2800 mm
(Typical cutting range: 10 mm 100 mm)
PlasmaPlasma cutting is a fast, precise process forcutting unalloyed and high alloyed steels as
well as Aluminium with high quality.
Plate thickness range:
Mild Steel: 2 mm 90 mm
Stainless Steel: 3 mm 160 mm
(Typical cutting range mild steel:
2 mm 50 mm)
LaserIf you want cuts of the highest quality with the
greatest possible accuracy, then laser cutting
with the square cut edge, narrow cut kerf and
low heat input is the right technology for you.
Plate thickness range:
Mild Steel: 1 mm 25 mm
Stainless Steel: 1 mm 20 mm
-
8/10/2019 Product de MESSER
12/20
12
Bevel cuttingunits
Laser bevels
Types of bevel I, V, Y
Material thickness for
bevellingup to15 mm
Material thickness for
vertical cutsup to 25 mm
Max. Angle 45
- Infinite rotation of the cutting head about
its own axis
- Interpolation of the bevel angel (change onthe fly from minimum to maximum torch
inclination whilst cutting)
- Positive and negative bevel angles in one
part are possible
- Collision protection
Oxyfuel bevels
Types of bevel I, K, V, X, Y
Material thickness for
bevellingup to 80 mm*
Material thickness for
vertical cutsup to 150 mm*
Max. Angle 60
* for manual units
- Infinite rotation of the unit about its own axis
- Interpolation of the bevel angel (change on
the fly from minimum to maximum torch
inclination whilst cutting)- Positive and negative bevel angles in one
part are possible
Plasma bevels
Types of bevel I, V, X, Y
Material thickness for
bevellingup to 50 mm
Material thickness for
vertical cuts
with edge start
up to 50 mm
up to 100 mm
Max. Angle 45
- Infinite rotation of the unit (Skew Rotator)
about its own axis
- Interpolation of the bevel angel (change on
the fly from minimum to maximum torch
inclination whilst cutting)
- Positive and negative bevel angles in one
part are possible
- Arc segment system
-
8/10/2019 Product de MESSER
13/20
13
The magnetic height sensing is fully integrated
into the torch with no external parts. Sensingring and additional cables are no longer
present, so there is no wear of the sensor no
any need to change it for different material
thicknesses. Better material utilisation through
better sensing right up to the edge of the
plate. The SensomatALFA height sensing is
easy to use with a digital display of the current
operating status.
With the ALFA torch, fast nozzle change is
possible without the use of tools. Set-up
times are significantly reduced.
ALFAThe oxyfuel machine cutting
torch of the future
OmniLiftTorch lifter- Stabile and fast cutter suspension for oxyfuel
and plasma cutting
- Patented stand-off control SensoMat
ensures the exact distance from torch to
material for better cut quality
- Faster stroke with spindle drive ensures
lower non-productive times, optimum cut
quality and high productivity
- Completely maintenance free
Global ControlThe latest generation controls
- Automatic and manual control of the
cutting processes
- Databases: technology, materials
and consumables
- Plate alignment compensation
- Torch positioning supported with camera
or laser diode (Option)- Unlimited reversing
- Graphic editing/display of the nesting
plan elements
- Graphic display of the current torch position
with Zoom function
- Service / maintenance diagnostics
- Import of DIN/ESSI formats
OMNILIFT OL 100 S/Z OL 200 N/S/Z OL 300 N/S/Z
Stroke (mm) 100 200 300
Stroke speedN = 66 mm/sec
S = 132 mm/sec
CNC controlled Z axis Z
-
8/10/2019 Product de MESSER
14/20
14
Marking
InkjetThe system for printing of lines, contours
and alpha-numeric characters. The plates aremarked fast and silently, with no negative
influences on the surface. With the single jet
system the marking speed for lines is 3-35 m/
min. Multi-jet systems mark characters with
3-26 m/min.
OmniScriptEspecially suitable for marking texts onto
parts (e.g. ISO 9000). The vibrating stylus
point with its own axes generates clearly
readable, long-lasting marking in just a few
seconds. Also suitable for marking lines andcurves (e.g. bending lines). The maximum
marking speed is 6.6 m/min (lines) and 1 cps
for 10 mm character height.
Plasma markingThe plasma marking unit melts the plate
surface and allows fast, precise marking withline widths, depending upon the application,
of 0.5 to 1.5 mm. The maximum marking
speed is 20 m/min.
Punch markingThe unit produces clear lines and punched
points on the plate surface for drilling,
contours and letters. The maximum marking
speed is 3 m/min.
-
8/10/2019 Product de MESSER
15/20
15
DrillingIn those cases where
- High accuracy of the holes is required
(e.g. as preparation for thread cutting),
- The hole diameter has to be less than the
material thickness or- The number of thermal hole piercings has
to be reduced,
the machines can also be equipped with a
drilling head.
Strip cuttingThe strip cutting unit has been specially
designed for cutting shops who have many
strips to cut. It can be interchangeably in-
stalled on a standard cutting machine It is
possible to cut two strips with widths of 90 up
to 180 mm or one strip with widths of 180 up
to 360 mm with this head. Height sensing is
made by the centre torch which is connected
to the SensoMatALFA.
BlastingThis process is mainly used in shipbuilding
where primed plates have to be prepared for
later welding. In one operation the plate is
both blasted and marked. Stiffeners can be
welded on at once. This makes for drastic time
savings in the production process.
-
8/10/2019 Product de MESSER
16/20
16
Softwarefor Processes and Production
Machine and Software from the same source
guarantee smooth running of all processes
through the entire value added chain. Thus
our customers achieve the best loading oftheir resources for a reasonable investment
sum. From preparing the order up to post cal-
culations. From designing the parts through
creating the nesting plan, transferring the plan
to the machine and finally the cutting of the
parts.
Machine based Information Technology
OmniWin 2011 and OmniBevel 2011
OmniWin 2011 is a modern design and nest-
ing software which can be adapted to your
requirements and which adjusts intelligentlyto your machine. OmniWin 2011 takes on
all cutting tasks which arise adjusted to the
needs of an order based production with CNC
controlled thermal cutting machines. Both
with low batch quantities in engineering and
pressure vessel manufacture and with the just
in time order based production in contract
cutting shops, OmniWin 2011 is effective and
economical. Special cutting processes, such
as bevel cutting, cutting of geometric devel-
opments, panel lines in shipbuilding or strip
cutting are all handled by OmniBevel 2011.
With a few inputs you select the contour andallocate a bevel to it. The rest is done auto-
matically by OmniBevel 2011. Because
OmniBevel 2011 separates bevel definition
from the technology, analyses the part contour
and inserts the technology and the process
parameters automatically.
Commercial Process Technology
OmniCalc 2011, OmniTrack 2011 and
OmniSchedule 2011
With OmniCalc 2011, OmniTrack 2011 and
OmniSchedule 2011 you can optimise yourprocess related tasks. They integrate your pro-
duction world into the ERP world. Commercial
processes become transparent and resources
can be planned and calculated. With exact
evaluation of costs and throughput, OmniCalc
2011 produces an exact quotation or order
calculation in seconds. Production planning
and product control from OmniSchedule 2011
makes processes transparent, reproducible
and reliable. People, machines and materials
are applied ideally. The factory data capture in
OmniTrack 2011 actively controls production
and checks the results. The professional
post calculation identifies and combats cost
drivers, recognises turnover carriers and
manages active processes.
-
8/10/2019 Product de MESSER
17/20
17
Cutting Tables and FiltersOur cutting systems can be completely inte-
grated into the production using our periphery
equipment. To these belongs environmental
technology matched to the cutting process as
well as automation and handling technology.
With our modern fume extraction tables
and filter units we help our customers to
contribute to protecting the environment.
FilterThe new filter series Z-Line offers a large
selection of filter solutions for flexible use in
industrial extraction. The powerful units
guarantee a safe and healthy working envi-
ronment. Because of their low consumption
of current and compressed air and the long
interval between services they are veryeconomical.
Tables for dry plasma and
oxyfuel cuttingThe basic construction of the PROGRES fume
extraction tables ensures reliable material
support and an effective extraction of the
dust and fumes generated during oxyfuel
and plasma cutting. Thanks to the modular
design, any necessary table length and width
is possible. The integrated slag trays make for
easy cleaning of the tables.
Water tablesBased on decades of experience in thermal
cutting, Messer also offers every type of water
table. For special materials or especially high
requirements for low distortion and low heat
affected zones, there are cutting processes in
on or over water. Messer can also offer here
the optimum solution designed for all conceiv-able variations, such as, for example:
- Automatic level lowering for
loading /unloading
- Agitation devices to prevent the build up of
explosive gasses when cutting Aluminium
under water
- Stops which can be lowered
- Fully automatic slag removal
Using modern modular construction the tables
can be virtually made to measure to suit the
individual application or logistic requirements
of the customer.
-
8/10/2019 Product de MESSER
18/20
18
RetrofitThe Economical Alternative
The advantages for you:- High increase in output for little investment
- Short down times
- Better availability of spare parts and
consumables
A conversion or retrofit means upgrading tothe newest technology such as modern nu-
merical controls based on a PC, or torch sus-
pensions with automatic height control using
the latest process oriented sensing methods.
Typical components for Retrofits are the new
generation of plasma units for the plasma
process or high performance oxyfuel torches.
After SalesEverything to keep your
Production running
The guarantee for the best productivity for
cutting is the use of original spare parts and
consumables. We hold all common spare
parts and consumables available for you for
short delivery. Ask today about the possibility
of special agreements to guarantee you the
best prices!
We have well trained teams in our repair work-
shop who ensure professional repair of com-
ponents such as gearboxes, torch suspensions,
rotating heads, controls and printed circuit
boards.
-
8/10/2019 Product de MESSER
19/20
19
TAC Competence can be made!Use products from Messer Cutting Systems more effectively
From the very beginning, customer orientationhas been a pillar on which the exceptional
success of Messer was based. This also in-
cludes the innovative and high standards of
the technology in Messer machines. However,
even the best technology can only carry out
what the operator tells it to do.
In our newly set up Training and Application
Center (TAC) in Gro-Umstadt, our specialists
transmit to the course participants in a practi-
cal manner all the knowledge and expertise
in working with our plants, equipment and
software.
In the Messer Training and Application Centerwe offer our customers:
- The concentration of Messer technical
know-how into a comprehensive training
curriculum
- The documentation of our technical expertise
and its implementation in pedagogic
optimised training documentation
- Staff trained both technically and
pedagogically trained personnel (ongoing
training in cooperation with the Technical
University of Dortmund)
- Access to an online learning platform for
independent study and knowledge
management (E-Learning)
-
8/10/2019 Product de MESSER
20/20
Messer Cutting Systems GmbH
Otto-Hahn-Strae 2-4D-64823 Gro-Umstadt
Phone +49 (0) 6078 787-0
Fax +49 (0) 6078 787-150
[email protected] 15576
zuliebemitSauerstoffgebleicht.
DIN-ISO-zertifiziertGedruckt
esrepublikDeutschland.
mentssakeonchlorine-freebleachedpaperPrintedinGermany
DieindieserDruckschriftenthaltenen
Beschreibungen,
GertedatenundAbbildungendienenderKundeninformationundsind
nichtbindend.
DerHerstelleristzur
nderungseinerProduktejederzeitberechtigt.
Thedescriptions,technicaldataandillustrationscontainedinthisdocumentareprovided
forguidancepurposesonlyandare
non-binding.
Themanufacturerreservestherighttomakealterationstoproductswithout
notice.
M
esserCuttingSystemsGmbH2010
=RegisteredTrademark