product data sheet ses fracpacker 10k · 2015-02-12 · casing 4-1/2 in. p110 13.5 lb/ft 2 ft / 0.6...
TRANSCRIPT
LTC pinHNBR Swellingelastomer
Expandable Steel SleeveLength 3.3 ft /1 m
Pressure compensation ports
HNBR Non Swelling elastomer
Casing 4- 1/2 in. P110 13.5 lb/ft
2 ft / 0.6 m
LTC box
www.saltel-industries.com
SALTEL EXPANDABLE STEEL FRACPACKER 10KSES FracPacker 10K is based on proprietary expandable stainless steel technology. The steel packer expandable sleeve is expanded between the casing and the borehole by applying pressure in the casing. Sealing is achieved through either a thin layer of bonded elastomer and swelling elastomer (a).Dynamic seals mounted between steel rings can be added to improve sealing capacity (b).
The patented pressure balanced double sleeve design allows for application of varying annular differential pressures while cycling the temperature without losing the seal.
The welded end fittings also serve as protection to the expandable sleeve while running in the well. Rotation is possible while running in, full casing characteristics are maintained. The expanded sleeve also acts as a centralizer to the casing string once expanded.
The expansion port is equipped with a valve system naturally closed from annulus to casing ID. It prevents the internal sleeve from collapsing and allows future re-frac operations. The system also closes if the flow exceeds a predetermined value to reduce any risks of fluid communication.
SES FracPacker 10KPRODUCT DATA SHEET
(a)Standard Model
(b)Dynamic
Sealing Model
Valve system
SIQ-688-NAM-AE - Nov 2014
CHALLENGES• ISO 14310 V3 qualified
10,000psi (68.9 Mpa) differential pressure
Cycling temperature from Standard: 250°F to 70°F (121°C to 21°C)
• Seal effectively in oval, out of gauge or irregular borehole
• Avoid thermal contraction when injecting fluids at a temperature lower than formation temperature
• No waiting time: the FracPacker expands on demand and immediately seals after the expansion pressure is applied
• Control the pressure applied by the packer on the formation in order to provide a good seal while not creating a high stress point
• Eliminate extra connections or casing ID reduction and maintain casing rating
• Allow to perform re-frac operations
• Life of the well solution
www.saltel-industries.com
Specifications
SIQ-688-NAM-AE - Nov 2014
V3 - Differential pressure • Pressure up to 10,000 psi (68.9 Mpa)
thermal cycling from 250°F to 70°F (121°C to 21°C)
• Qualified with axial load as relevant
QUALIFIED TO ISO 14310 Manufacturing quality grade• Saltel Industries controls the manufacturing
process from the mill sheet selection to the product ready to run in the well
• A Job Planner integrates all the well parameters and gives specific configuration details of the expandable steel packer performance
SES FRACPACKER 10K PRODUCT RANGE
SES FracPacker 10K ** SES FracPacker 10K Double Sleeve Design**
4-1/2 inSTD Dynamic
SES
Frac
Pack
er S
PECI
FICA
TION
S
Saltel Industries product number SI-14878 SI-14353
Max. service temperature 250°F
RIH External OD 5.50 in
Overall length of the packer (a) 3.3 ft
Sealing contact length (b) 2.5 ft
Pup Joint length 10 ft
Base pipe P110 13.5 lb/ft
Threaded connexion Buttress or LTC
Tool ID Special drifted at 3.875 in (4-1/2 in 11.6 lb/ft drift)
Expandable sleeves material Austenitic Stainless steel
Expandable sleeves thickness (Internal / External) Int.: 2 mm / Ext.: 3 mm
Nominal borehole diameter to be set in 6.125 in.
Maximum borehole diameter to be set in 6.60 in.
Ovalized borehole OK
DLS (Dogleg Severity) 15 deg/100ft
Minimum pressure to initiate the packer expansion 2,000 psi
Expansion pressure to reach Nominal borehole diameter* 4,500 - 5,800 psi
Expansion pressure to compress the Elastomer sealing cover* 5,500 - 6,800 psi
Differential annular pressure rating across the packer* up to 10,000 psi
Annulus to casing ID differential pressure Pside 1* up to 10,000 psiAnnulus to casing ID differential pressure Pside 2* 700 psi
Base casing torsional load rating As per casing joint torque rating
Base casing tensile strength rating 94% of casing rating
* Standard specifications - Contact Saltel Industries for a detailed evaluation: Expansion Pressure increases to reach larger Borehole ID / Expansion and Differential Pressures depend on Temperature. **The FracPacker Double Sleeve Model is not available in Europe. Please consult us for more information.
FEATURES• Built onto standard
4-1/2 in. P110 13.5 lb/ft (114.30 mm P110 20.09 kg/m) casing special drifted at 3.875 in. (98.42 mm)
• Burst and collapse rating equivalent to casing rating
• Connection threads: LTC available as standard
• RIH external OD of the STD model is 5 .5 in. (139.70 mm), can be run through 7 in. 35 lb/ft (177.80 mm 52.08 kg/m) casing (DYN model OD: 5.75 in. / 146.05 mm)
• 10,000 psi (68.9 Mpa) Differential pressure rating
• A thin layer of HNBR swelling elastomer associated with a high expansion ratio of the steel sleeve guarantee the sealing even in washed out zones
• Low reactivity to temperature thermal cycling and temperature fluctuations
• An inflation valve system prevents the internal sleeve from collapsing and allows re-frac operations, it also acts as a security if the packer is expanded in front of a wash-out
• Other casing materials, weights and end threads available on demand
Valve system