product catalogue_en

Nano4-premiumtextile® Invisible sealing, waterproofing and

easy to clean for heavy textiles

The Nano4-premiumtextile is a water based Nanotechnology

product that thanks to SiO2 properties seals the protected area so that no

foreign particles are left in the fabric. Humidity, water, coffee, ketchup, red

wine, coffee, oil, syrup, stains, sauces, drinks etc. are removed from the

fabric using Nano4-premiumtextile. The stain is simply removed with a dry

or slightly damp cloth and the fabric is back to its original state as if nothing

had happened.

Whether you want to stay dry or protect from stains that may occur during your daily activities, you can always count on Nano4-premiumtextile. The coating of fabrics with Nano4-premiumtextile has no effect on the skin.

The Nano4-premiumtextile is certified as a ECOLOGY product from the

HOHENSTEIN Institute Germany, and also it is tested from the

TDResearch Institute Canada.

Carpets, rugs

Canvas sails and sailing

Car Seats

Child seats

Covers for swimming pools

Bags

Yacht Tents

Umbrellas

Leather (without chemicals )

Excellent protection against stains and dirt settled in any fabric.

Protection against bacteria

No color alteration from sunlight

Very easy to clean with a little water

Completely invisible.

Reduction of chemical detergents by 90%.

Eco-friendly by reducing use of chemicals

Advantages of using Nano4-premiumtextile

On which surfaces can I use Nano4- premiumtextile?

http://nano4life.co/wp-content/uploads/certificate.pdf

http://nano4life.co/wp-content/uploads/Contact-Angle-Study-for-fabric-repellants-Jun-11-2012-copy.pdf

Owners of all the fabrics available in every home

Manufacturers of carpets and rugs

Hotels, Restaurants and Ships

Armed forces -- Sports clubs -- Hunters

Hospitals

Professionals tailors

1. Clean the fabric first, before using Nano4-premiumtextile, otherwise it will trap the existing dirt .

2. Spray the fabric with Nano4-premiumtextile from 15cm distance to slightly very wet the surface where you want to protect. After coating with Nano4-premiumtextile the surface takes 24 to 48 hours (at 20

0C) to be fully cured. The time required for curing may vary depending on ambient

temperatures.

3. Another way to protect the fabric is by dipping

For fabrics washed regularly, the protection may last between 20 to 30 washes. You can re-apply Nano4-

premiumtextile to the fabrics to obtain the same results.

The amount of product needed each time depends on the method of application and type of fabric. In any

case between 25ml/m2 and 100ml/m2. This means that 1 liter can cover the surface of 10m2 to 40m2. We

recommend to test each type of fabric first to determine the absorption of the surface.

Customer targets

How to use the product

Duration of protection

Consumption

Nano4-textile® Invisible sealing, waterproofing and

easy to clean for thin textiles

The Nano4-textile is an eco-friendly Nanotechnology product based on water. Thanks to the

properties of SiO2 , the fabric is covered with a thin, invisible layer coating leaving any free resources to breathe and ensuring that no dirt is left in the fabric. Humidity, water, coffee, ketchup, red wine, oil, syrup, stains, sauces, drinks etc. are removed from the fabric using Nano4-textile. The stain is removed with a dry or slightly damp cloth and the fabric gets back to its original state. Everyday stains are a thing of the past when using Nano4-textile to protect your fabric. Whether you want to stay dry or protect from stains that may occur during your daily activities, you can always count on Nano4-textile . The Nano4-textile is certified from the HOHENSTEIN

Institute Germany, and also it is tested from the TDResearch Institute Canada.

Silk fabrics

Restaurant Tablecloths

Clothing, jackets, shirts, trousers, ties

Wedding clothes

Military clothing, body suits Fire, Police etc.

Underwear, children's and baby clothes

Raincoats, uniforms, ski clothing hunters

Clothes cyclist - All kinds of shoes

Sheets, blankets, tablecloths

Flags

Paper Packaging

packages

Brochures, Price Lists

Excellent protection against stain.

Protects against bacteria.

Protects against UV sunlight that alters the color of the material.

Easy to clean.

Does not affect the appearance of the fabric as it is completely invisible.

Stains are no longer your concern.

Increase the life of the fabric, due to the huge reduction of chemical cleaners.

Save money by reducing the use of chemical detergents to 90%.

Helps protect the aquifer because of the large reduction of chemical cleaning products.

On which surfaces can I use Nano4-textile?

Advantages to the surfaces protected with Nano4- textile


Manufacturers

Hotels

Restaurants

Ships

Armed forces

Sports clubs

Hospitals

Professionals blacken clothes

1. Before you spray a cloth with Nano4-textile make sure that the surface is clean. Otherwise it will trap the existing dirt on the cloth. 2. Of about 15 cm from the surface, spray slightly wet on the area you want to protect. 3. The surface is ready to use few minutes after applying, if it has dried. Full protection is achieved after 24 hours. For fabrics washed regularly, the protection may last 10-20 washes. You can re-apply Nano4-textile to the fabrics to obtain the same results. The amount of product needed each time has to do with the method of applying and type of fabric, and in any case between 25ml/m2 and 100ml/m2. This means that 1 liter can cover the surface of 10m2 to 40m2. We recommend to test each type of fabric first to determine the absorption of the surface.

Customer targets



Consumption

Nano4-shoes® Intelligent water resistant, coating for shoes, easy to clean and

invisible protection

The Nano4-shoes is a water based Nanotechnology product 100% ecological. Thanks to its SiO2 properties

Nano4-shoes seals the protected area so that no foreign particles are left in the fabric. Humidity, water, coffee,

ketchup, red wine, coffee, oil, syrup, stains, sauces, drinks etc. are

repelled from the shoes using Nano4-shoes. The stain is removed

with a dry or slightly damp cloth and your shoes come back to its

original state as if nothing had happened.

Whether you want to stay dry or protect from stains that may occur

during your daily activities, you can always count on Nano4-

shoes. The coating of shoes with Nano4-shoes has no effect on

the skin.

The Nano4-shoes is certified from the HOHENSTEIN

Institute Germany, and also it is tested from the TDResearch Institute Canada.

Shoes with porous surfaces

Do not recommended for patent leather

Excellent protection against stains or dirt that may settle on the shoes

No color alteration from sunlight



Reduce the use of chemical detergents by 90%.

Environmentally friendly by reducing the use of cleaning detergents

On which surfaces can I use Nano4-shoes?

Advantages of using Nano4-shoes


http://www.google.gr/imgres?um=1&hl=el&sa=N&rlz=1T4ADBF_enGR249GR249&biw=1280&bih=833&tbm=isch&tbnid=BugUHeeGT2a7FM:&imgrefurl=http://www.ofshoes.net/12/Ugg-Boots/&docid=fWqmHXoLQCbgWM&imgurl=http://www.ofshoes.net/img/UGG-boots.jpg&w=412&h=391&ei=995ZT72XA4n_4QSY5-zYDw&zoom=1

Manufacturers and shoe retailers

Anyone who needs shoe protection from water or dust

1. Clean shoes thoroughly to avoid any dirt trapping in the material

2. Spray the shoes with Nano4-shoes slightly

3. The shoes are ready to use few minutes after application. Full protection is achieved after 24 hours.

A protection product reaches up to 12 months, provided that the application of Nano4-shoes was done properly. If

you feel the protection is not the same as before, spray Nano4-shoes again as instructed.

The amount required depend on the method of application and type of fabric,

and in any case between 25ml/m2 and 100ml/m

2. This means that 1 liter can

cover the surface of 10m2 to 40m

2. We recommend making a first trial in each

type of shoes to determine its absorption.

Customer targets



Consumption

http://www.google.gr/imgres?start=193&um=1&hl=el&sa=N&rlz=1T4ADBF_enGR249GR249&biw=1280&bih=833&addh=36&tbm=isch&tbnid=r9q0h0GrkWLKlM:&imgrefurl=http://celebrityfashionmodels-1.blogspot.com/2011/12/shoes.html&docid=Jc1fSP5akSsU9M&imgurl=http://3.bp.blogspot.com/--Q2d-eV4P78/Tje9VDa1lxI/AAAAAAAAFrc/fRxHrIp5IUo/s1600/wedges_002.jpg&w=468&h=308&ei=x95ZT-3XFI7P4QT6tvG7Dw&zoom=1

http://www.google.gr/imgres?um=1&hl=el&sa=N&rlz=1T4ADBF_enGR249GR249&biw=1280&bih=833&tbm=isch&tbnid=JH-gnCtOGb63EM:&imgrefurl=http://shoesmanufacturer.ph/&docid=7hWEdnd_pla6SM&imgurl=http://shoesmanufacturer.ph/wp-content/uploads/2011/07/Supra-Skytop-Mens-Skateboard-Shoes-Red-Black-Black_a.jpg&w=640&h=480&ei=Ed5ZT83eEaTP4QTB2KC6Dw&zoom=1

Nano4-wood® Invisible protection, waterproofing, sealing for wood surfaces

Nano4-wood is a water based Nanotechnology product very friendly

to the environment. The Nano4-wood SiO2 properties create an invisible

protection against any dirt particles and also protects surfaces from sunlight,

moisture, creating moss, etc. Nano4-wood also increases the durability of the

materials applied with our product. Once applied, the Nano4-wood creates an

invisible layer which prevents moisture to enter the surface, offering great

resistance to chemical stress. The Nano4-wood does not contain silicone or

other harmful chemicals.

Wooden structures

Pergolas

Wooden garden furniture

Wooden boats

Wooden roofs and trusses

Wooden fences

Wooden floors

Wooden surfaces with no chemical paints.

It does not affect the appearance of the wood

Protection from UV radiation

Long protection and easy cleaning

Abrasion resistant

Resistant to pressure wash (50-60 bar)

Excellent resistance to frost

Odorless

On which surfaces can I use Nano4-wood?

Advantages of using Nano4- wood

Manufacturers of wooden buildings

Carpenters

Floor installers

Contractors

Manufacturers of wood surfaces

Methodes

For the best results surfaces should be sprayed at least twice (wet to wet , it is very important to spray the second hand before the first has dried ), depending on the absorbency of the surface you want protected. The process may need to be repeated.

Industrial application: For the best and economy installation you can use a HVLP spray gun.

Other application techniques: In addition to spraying, you may protect the surface with Nano4-wood using a brush, dipping or a paint roller. Results may vary depending on the application method.

After coating with Nano4-wood the surface takes 24 to 48 hours (at 200C) to be fully cured. The time required for

curing may vary depending on ambient temperatures.

Protection reaches up to 8 years. If you feel the protection is wearing off re-apply Nano4-wood as previously

instructed.

The amount required each time has to do with the method of application and type of surface, and in any case

between 30ml/m2 and 200ml/m

2. This means that 1 liter can cover the surface of 5m

2 to 33m

2. We recommend making

a first test on each surface to determine absorption.



Consumption

Customer targets

http://nano4life.co/wp-content/uploads/168385_SATAjet4000B_en1.pdf

Nano4-stone® Invisible protection, waterproofing, sealing for wall

Stone - cement

The Nano4-stone is a Nanotechnology product that is water based

and it is completely environmentally friendly. The Nano4-stone SiO2

properties create an invisible protection against any dirt particles and from

sunlight, moisture, moss, grasses, etc. Nano4-stone also increases the

durability of the materials applied with our product. Surfaces coated with

Nano4-stone are also highly resistant to stress and does not contain

silicone or other harmful chemicals.

Stone walls

Insulation, sealing cement pools

Walls painted with plastic

Tiles

Blocks

Stone flooring

Sidewalks

It does not affect the appearance of the surface

Protection from UV radiation

Abrasion resistant

Easy application, fast drying

Resistant to pressure wash (50-60 bar)

Excellent resistance to frost

Odorless

Protects against moss or fungi

Weather resitant

On which surfaces can I use Nano4-stone?

Advantages of using Nano4-stone

Builders

Contractors

Houses with tile

Houses with moisture problems

Methodes

For the best results surfaces should be sprayed at least twice (wet to wet , it is very important to spray the second hand before the first has dried ), depending on the absorbency of the surface you want protected. The process may need to be repeated.


Other application techniques: In addition to spraying, you may protect the surface with Nano4-stone using a brush, dipping or a paint roller. Results may vary depending on the application method.

After coating with Nano4-stone the surface takes 24 to 48 hours (at 200C) to be fully cured. The time required

for curing may vary depending on ambient temperatures.

Nano4-stone protection reaches up to 8 years, but if you feel the protection is wearing off you can re-apply.

The amount required each time has to do with the method of application and type of surface, and in any case

between 30ml/m2 and 200ml/m


2 to 33m

2. We

recommend making a first test on each surface to determine absorption.



Consumption

Customer targets


Nano4-bathcare®

(for commercial-industrial use*) Sealing, protection and easy to clean for porcelain surfaces

All solid objects including toilet bowls and tile have

microscopic pores, invisible to the human eye where dirt can

penetrate. Chemical detergents are used regularly to clean these

objects but do not solve the problem.

Nanotechnology brings a solution with its eco-friendly and ethanol

based product Nano4-bathcare is the solution with its ethanol

base and SiO2 properties seal the protected area so that foreign

particles do not find a way to penetrate. This results in an easy

way to clean with little water or with a cloth. The Nano4-bathcare

is ecological and environmentally friendly.

Polished ceramic surfaces

Kitchen bowls

Bowls

Bathtubs

Toilets

Bathroom tiles

Pools tiled

All kinds of porcelain

Excellent protection against stains from all types of dirt that

can settle on the sanitary ware.

Antibacterial protection.

It allows the settling of salts on the surfaces.

Very easy to clean stains from toothpaste.

Very easy to clean tough stains like silicone, wax, oil.

It doesn’t allow to create moss or green mold

No colour alteration from UV sunlight

Any scratches that may exist on the surface can easily

disappear with a cloth.

Reduce the use of chemical detergents to 90%.

Helps protect the aquifer because of the large reduction of chemical cleaning products

On which surfaces can I use Nano4-bathcare?

Advantages of using Nano4- bathcare

Houses

Hotels

Hospitals

Shops

Public Toilets

Tourist Buses

Ships

Airplanes

Trains

Surface preparation

1. Before using the product clean the surface very well with traditional methods and rinse with water.

2. Sprinkle and rub well the surface with the Nano4-preclean with a cloth (use sparingly). The surface

has to be dry, dust free, oil and grease free.

3. The treatment of the target surface should be carried out under ambient conditions. Use only on room

tempered surfaces (between 30C and 40

0 C).

Industrial application: For the best and economy installation you can use a HVLP spray gun. For more

information’s please contact your local distributor or visit our web site.

Other application techniques:

Spray the surface with Nano4-bathcare in places 30 X 30 cm. The liquid has to be

polished with a cloth (use sparingly).

The curing of Nano4-bathcare occurs under ambient conditions for minimum 60

minutes up to one day. In case of higher atmospheric humidity longer curing times are

necessary.

The protection life of surfaces applied with Nano4-bathcare lasts up to 8 years provided that the application has been made in accordance with the instructions.

With 1 liter you can cover up to 200 m2 where the application is made by using spray gun type

HVLP .


Consumption

Customer targets



Nano4-glassceramic®

(for commercial-industrial use*) Sealing, protection and easy to clean for glass

All solid objects including toilet bowls and tile have microscopic pores, invisible to

the human eye where dirt can penetrate. Chemical detergents are used regularly to clean

these objects but do not solve the problem. Nano4-glassceramic brings an ecological

solution with its nanoparticles that seal the resources of the protected area so that foreign

particles do not find a way to penetrate. . This results in a very easy removal with little

water or simply with a cloth, protecting the environment from the use of chemical

detergents no longer needed for cleaning. At the same time protecting from UV radiation

and giving the glass a special toughness making it much more secure.

Large windows of houses and buildings

Glassware items

Sunglasses, vision, bikers, skier’s e.t.c.

Internally car glass back and sides

Indoor shop windows

Pyrex glass

Kitchen ceramic hotbed

Glass blocks

And generally all glazing

Easy cleaning and anti-blur protection to glossy surfaces It contains no silicones, waxes or oils Provides antibacterial protection Huge resistance to chemical and mechanical stresses Completely invisible. Effective protection against wear of the glass Withstand friction and high temperatures Frost resistance Protects against UV sunrays Saving money by reducing the use of chemical detergents to 90%.

On which surfaces can I use Nano4-glassceramic?

Advantages of using Nano4-glassceramic

Glass Manufacturers

Manufacturers Ceramic Kitchen outbreaks

Hotels

Restaurants

Ships

Hospitals

Surface preparation


2. Sprinkle and rub well the surface with the Nano4-preclean with a cloth (use sparingly). The surface has to

be dry, dust free, oil and grease free.

3. The treatment of the target surface should be carried out under ambient

conditions. Use only on room tempered surfaces (between 30C and 40

0 C).

Industrial application: For the best and economy installation you can use a HVLP

spray gun. For more information’s please contact your local distributor or visit our web site.


Spray the surface with Nano4-glassceramic in places 30 X 30 cm. The liquid has to

be polished with a cloth (use sparingly).

The curing of Nano4-glassceramic occurs under ambient conditions for minimum 60

minutes up to one day. In case of higher atmospheric humidity longer curing times are necessary.

.

The protection life of surfaces applied with Nano4-glassceramic lasts up to 8 years provided that the application has been made in accordance with the instructions.

With 1 liter you can cover up to 200 m2 where the application is made by using spray gun type HVLP .

Please request technical information from your local Distributor.

Customer targets


Consumption



Nano4-chromemetal®

(for commercial-industrial use*)

Sealing, protection and easy to clean for stainless steel

surfaces

All solid objects have microscopic pores, invisible to the human eye

where dirt can penetrate. Chemical detergents are used regularly to

clean these objects but do not solve the problem. Stainless steel due to

their glossy finish shows dirt very easily. Nano4-chromemetal is the

solution with its ethanol base and SiO2 properties seal the protected

area so that foreign particles do not find a way to penetrate. This results

in an easy way to clean with little water or with a cloth. The Nano4-

chromemetal is ecological and environmentally friendly.

Stainless steel surfaces

Restaurant kitchens

Silver

Sinks

Handles

Walls with Stainless steel surfaces

Appliances

Lighting Fixtures

Lifts

Ticketing machines

Excellent protection against stains and dust.

Very easy to clean fingerprints.

Easy to clean cooking surfaces,

Protect surfaces against UV radiation from sunlight



Helps protect the aquifer because of the large reduction of chemical cleaning products

On which surfaces can I use Nano4-chromemetal?

Advantages of using Nano4- chromemetal

Houses

Hotels

Hospitals

Shops

Companies manufacturing Stainless steel surfaces

Buses

Airplanes - Ships-Trains

Surface preparation






0 C).




Spray the surface with Nano4-chromemetal in places 30 X 30 cm. The liquid has to be polished with a

cloth (use sparingly).

The curing of Nano4-chromemetal occurs under ambient conditions for minimum 60


The protection of a surface treated with Nano4-chromemetal lasts up to 8 years, provided that the

application has been made in accordance with the instructions.


HVLP .

Customer targets

How to use the product on the surfaces

Consumption



Nano4-plastic®


Sealing, protection and easy to clean for plastic surfaces

All solid objects have microscopic pores, invisible to the

human eye where dirt can penetrate. Chemical detergents are used

regularly to clean these objects but do not solve the problem.

Nano4-plastic is the solution with its ethanol base and SiO2

properties seal the protected area so that foreign particles do not

find a way to penetrate. This results in an easy way to clean with

little water or with a cloth. The Nano4-plastic is ecological and

environmentally friendly.

At the same time Nano4-plastic prevents UV radiation that alters the color or quality of protected materials.

All plastic surfaces

Polycarbonate

ABS

Plastic Glasses

Laminate Floors

Protection against stains, dirt, grease, food scraps, oils,

etc.

Antibacterial protection

Protection against discoloration from UV Radiation

Easy to clean with a little water

It contains no silicone, wax, oil

Resistance to abrasion, chemical and mechanical

stresses

Completely invisible

Any scratches that may exist on the surface can easily disappear with the Nano4-plastic with a cloth.

Reduce the use of chemical detergents by 90%.


On which surfaces can I use Nano4-plastic?

Advantages of using Nano4-plastic

Plastic chairs and tables

Plastic car parts

Manufacturer or dealer of recreational boats, cars

Manufacturers of plastic furniture

Boat owners

Manufacturers of swimming pools

Surface preparation






0 C).




Spray the surface with Nano4-plastic in places 30 X 30 cm. The liquid has to be polished with a cloth

(use sparingly).

The curing of Nano4-plastic occurs under ambient conditions for minimum 60


The protection of a surface treated with Nano4- plastic lasts up to 8 years, provided that the application has

been made in accordance with the instructions.


HVLP . Please request technical information from your local Distributor.

Customer targets

How to use

Consumption



Nano4-carprotect®

(for industrial use*) Sealing, protection and easy to clean for

external moto and car surfaces

The Nano4-carprotect is a Nanotechnology product especially

designed for the protection of cars surfaces. It‘s ethanol base is environmentally friendly. The Nano4-carprotect nanoparticles seals the surface of the car so that particles such as insects, grimy substances, dirt don’t find a way to penetrate. This results in a very easy removal with little water or simply a cloth. Nano4-carprotect protects the color of the car from UV radiation. Apply Nano4-carprotect on your car and save the trouble and expense of cleaning, using various detergents.

Cars

Vans

Motorcycles

Easy to clean with little water

It contains no silicones, waxes or oils

Resistance to chemical and mechanical stresses


Withstand enormous friction

Withstand high pressure steam cleaning

Excellent performance even using a small amount

Withstand high temperature

Absolute frost resistance

Protects against UV rays

Easy application



On which surfaces can I use Nano4-carprotect?

Advantages of using Nano4-carprotect

Car ‘s

Taxis

Busses

Trains

Motorcycles

Surface preparation

1. Before using the product clean the surface very well with traditional methods and rinse with water. 2. Sprinkle and rub well the surface with the Nano4-preclean with a cloth (use sparingly). The surface

has to be dry, dust free, oil and grease free. 3. The treatment of the protected surface should be carried out

under ambient conditions. Use only on room tempered surfaces (between 3

0C and 40

0 C).

Industrial application: For the best and economy installation you

can use a HVLP spray gun. For more information’s please contact

your local distributor or visit our web site.


Spray the surface with Nano4-carprotect in places 30 X 30 cm. The liquid has to be polished with a cloth (use sparingly).

The curing of Nano4-carprotect occurs under ambient conditions for minimum 60 minutes up to one day. In case of higher atmospheric humidity longer curing times are necessary.

Protection lasts up to 8 years after applying to the surface provided that the application has been made in accordance with the instructions.

With 1 liter you can cover up to 200 m2 where the application is made by using spray gun type HVLP



Consumption

Customer targets


Nano4-carglass®


Sealing, protection and easy to clean for car wind shield

Nano4-carglass is a Nanotechnology product especially made for car windshields, vessels, and

surfaces where wipers are generally used. This ethanol based product is completely environmentally friendly, and ecological. Thanks to the properties of SiO2, it provides an invisible and lasting protection to your windshield preventing contamination such as dust, insects, dirt, etc. After applying Nano4-carglass any dirt can be easily removed with little water without any mechanical or chemical means. During winter Nano4-carglass allows easy removal of snow and ice as Nano4-carglass prevents water penetration on the windshield surface. At the same time when rainwater falls on the windshield Nano4-carglass has the ability to create small bubbles that repel water and fly out with wind while driving. Visibility in the rain, improves significantly using Nano4-carglass. At speeds above 50 km no need to use wipers, the visibility for the driver is almost perfect.

In a car windshield In windshield vessels In aircraft windshield And generally used where wipers

Excellent visibility for the driver even without the use wipers. Excellent protection against dirt or water. Windshield protection from UV radiation. No colour alteration on your dashboard from UV sunlight Easy to clean with a little water Resin from trees is very easy to remove Resistance to abrasion. Completely invisible. Reduce the use of windshield wipers Reduce the use of chemical detergents to 90%. Helps protect the aquifer because of the large reduction of chemical cleaning products.

In which surfaces you can use the Nano4-car glass

Advantages of using Nano4- car glass

Car owners

Yacht manufacturers or dealers

Car manufacturers or dealers

Boat owners

Pilots

Surface preparation






0 C).




Spray the surface with Nano4-carglass in places 30 X 30 cm. The liquid

has to be polished with a cloth (use sparingly).

The curing of Nano4-carglass occurs under ambient conditions for minimum 60 minutes up to one day. In case of higher atmospheric humidity longer curing times are necessary.

The protection of products varies with the use of wipers and for about 20,000 km, provided that the placement of Nano4-carglass done according to instructions.


HVLP .

Customer targets


Consumption



Nano4-rims®


Sealing, protection and easy to clean rims on cars

Nano4-rims is a Nanotechnology product especially built for

car rims. With its ethanol base it is completely environmentally friendly.

Thanks to the properties of SiO2 Nano4-rims provides an invisible and

durable protection for car rims, preventing dust particles from

penetrating into the pores or fibres of the material. After using Nano4-

rims dust and dirt can be easily cleaned with a little water.

Aluminum Car Rims

Titanium Rims

Alloy Rims

Excellent protection against dirt, dust, mud, water and any other element.

Protect from UV radiation


Resistance to abrasion.

High resistance to chemical and mechanical stresses


Withstand high pressure steam cleaning

Withstand high temperatures

Absolute frost resistance

On which surfaces can I use Nano4-rims?

Advantages of using Nano4-rims

Car owners

Manufacturers dealers

Manufacturer or dealer Wheel

Surface preparation

1. Before using the product clean the surface very well with traditional

methods and rinse with water.

2. Sprinkle and rub well the surface with the Nano4-preclean with a cloth

(use sparingly). The surface has to be dry, dust free, oil and grease free.

3. The treatment of the target surface should be carried out under ambient

conditions. Use only on room tempered surfaces (between 30C and 40

0 C).




Spray the surface with Nano4-rims in places 30 X 30 cm. The liquid has to be polished with a cloth (use

sparingly).

The curing of Nano4-rims occurs under ambient conditions for minimum 60 minutes up to one day. In case of higher atmospheric humidity longer curing times are necessary.

The protection life of the surface applied with Nano4-rims lasts up to 1 years. If you feel the protection is

wearing off follow the previous instructions and re-apply Nano4-rims for long lasting protection.

With 1 liter you can cover up to 200 m2

where the application is made by using spray gun type HVLP . Please

request technical information from your local Distributor.

Customer targets


Consumption



Nano4-yacht®

(for industrial use*) Sealing, protection and easy to clean for external ship

Plastic surfaces

As you now that all objects even what prey are microscopic pores, invisible to the human eye, within

which infringes any dirt, such as powders, oils, gases, salt, etc. which we see daily in all subjects, which go to require hard work, enough money and use of chemical detergents, chemical detergents which do not solve the problem, simply remove the dirt but leave the resources there in a while so the dirt back. This is to give a definitive solution Nanotechnology the product Nano4-yacht which has as its basis ethanol and is completely ecological. The Nano4-yacht the content thereof SiO2 seal resources of the protected area so that dirt like fat, salt, meals not find a way to penetrate and stabilize, so they can be removed easily with a little water to sail without having to rub the surface by mechanical or chemical means. At the same time Nano4-yacht prevent UV radiation to alter the color or quality of protected materials. The coating is extremely strong, because you embody the overlapping area matches the material and thus allows for optimization of the protective function.

External plastic ship surfaces

Fiberglass,

GRP,

Polycarbonate,

ABS,

Neopren,

Hypalon,

Sealing and easy removing of stains and all type of dirt deposits on external ship surfaces. The UV- stability enables functionality for a number of years, approximately the life time of the coated

surface. High-pressure /steam - cleaning resistance. 100% invisible does not affect the appearance of the surfaces Absolute resistance against ice Very good chemical and mechanical resistance Excellent efficiency with low consumption Save time and money by reducing usage of chemical detergents up to 90%. Helps protect the aquifer because of the large reduction of chemical cleaning products.

In which surfaces you can use the Nano4-yacht

Advantages for the surfaces protected with the Nano4- yacht

Ship owners

Surface preparation

1. Before using the product clean the surface very well with traditional methods and rinse with water. 2. Sprinkle and rub well the surface with the Nano4-preclean with a cloth (use sparingly). The surface

has to be dry, dust free, oil and grease free. 3. The treatment of the protected surface should be carried out

under ambient conditions. Use only on room tempered surfaces (between 3

0C and 40

0 C).

Industrial application: For the best and economy installation you

can use a HVLP spray gun. For more information’s please contact your

local distributor or visit our web site.


Spray the surface with Nano4-yacht in places 30 X 30 cm. The liquid has to be polished with a cloth (use sparingly).

The curing of Nano4-yacht occurs under ambient conditions for minimum 60 minutes up to one day. In case of higher atmospheric humidity longer curing times are necessary

The protection of a surface treated with Nano4-yacht lasts up to 8 years, provided that the application has

been made in accordance with the instructions.


HVLP . Please request technical information from your local Distributor.

Customer targets


Consumption



Nano4-shipinox®

(for industrial use*)

Invisible sealing, protection and easy to clean for ship stainless surfaces

All solid objects have microscopic pores, invisible to

the human eye where dirt can penetrate. Chemical

detergents are used regularly to clean these objects but do

not solve the problem. Stainless steel due to their glossy

finish shows dirt very easily. Nano4-ship inox is the solution

with its ethanol base and SiO2 properties seal the protected

area so that foreign particles including sea salt do not find a

way to penetrate. This results in an easy way to clean with

little water or with a cloth. The Nano4-ship inox is ecological

and environmentally friendly.

For all ship stainless surfaces

It can also be used on any other stainless surfaces

Easy removal of stains, rust and sea salt deposits on ship

surfaces.

The UV- stability offer durability for a number of years

High-pressure /steam - cleaning resistant.

100% invisible

Absolute resistance against ice

Excellent chemical and mechanical resistance

Excellent efficiency with small application

Save time and money by reducing use of chemical

detergents by 90%.

Ship owners

On which surfaces can I use Nano4-ship inox?

Advantages of using Nano4-ship inox

Customer targets

Surface preparation


2. Sprinkle and rub well the surface with the Nano4-preclean with a cloth (use sparingly). The surface has to be dry, dust free, oil and grease free.

3. The treatment of the protected surface should be carried out under ambient conditions. Use only on room tempered surfaces (between 3

0C and 40

0 C).

Industrial application: For the best and economy installation you can use a

HVLP spray gun. For more information’s please contact your local distributor or visit

our web site.


Spray the surface with Nano4-ship inox in places 30 X 30 cm. The liquid has to be polished with a cloth (use sparingly).

The curing of Nano4-ship inox occurs under ambient conditions for minimum 60 minutes up to one day. In case of higher atmospheric humidity longer curing times are necessary

The protection life of surface applied with Nano4-ship inox lasts up to 8

years, provided that the installation has been made in accordance with the

instructions.

With 1 liter you can cover up to 200 m2 where the application is made by using spray gun type HVLP . Please

request technical information from your local Distributor.


Consumption



Nano4-deck wooden® Invisible protection, waterproofing, sealing for wooden

deck surfaces

The Nano4- deck wooden is a Nanotechnology product that is

based on water. It is very friendly to environment and ecological. The Nano4- deck wooden SiO2 properties creates an invisible protection against dirt and also protects surfaces from sunlight, moisture, creating moss, grasses, and also increases durability. Once applied, the Nano4- deck wooden creates an invisible layer which prevents moisture to enter the surface, offering great resistance to chemical stress. The Nano4- deck wooden does not contain silicone or other harmful chemicals.

Wooden boats

Wooden Deck floors

Wooden surfaces with no chemical paints.

No alteration on the appearance (Layer thickness: 100-150 nm)

Excellent Hydro and Oleophobic properties

Solvent-free and odourless

Hardening at room temperature. No additional energy or UV light

required.

Pressure wash-resistant (50 - 60 bar)

No discolouration

High temperature-resistance - UV-stable

Absolute frost-resistance

Easy cleaning

Enduring impregnation enables very high freeze-thaw resistance

and no cracking due to ice.

Reduction of moss and fungus growth

Ideal for coastal areas, do not allow the salt to penetrate into the pores of the wood

On which surfaces can I use Nano4- deck wooden ?

Advantages of using Nano4- deck wooden

Boat owners

Manufacturers of wooden decks

Methodes

For the best results surfaces should be sprayed at least twice (wet to wet, it is very important to spray the second hand before the first has dried ), depending on the absorbency of the surface you want protected. The process may need to be repeated.


Other application techniques: In addition to spraying, you may protect the surface with Nano4- deck wooden using a brush, dipping or a paint roller. Results may vary depending on the application method.

After coating with Nano4- deck wooden the surface takes 24 to 48 hours (at 200C) to be fully cured. The time

required for curing may vary depending on ambient temperatures.

Protection lasts up to 8 years, provided that the application of Nano4- deck wooden is done according to instructions. The amount required each time has to do with the method of application and type of surface, and in any case between 30ml/m

2 and 200ml/m


2 to 33m

2. We

recommend making a first test on each surface to determine absorption.


Consumption


Customer targets


csc4-yacht®

(Clean-Shine-Coat)

Cleaning – Shining -Sealing, protection and easy to

clean for external Ship & Plastic surfaces

After years of studies in our laboratories in Germany our company NANO4LIFE EUROPE®

proudly presents in world exclusive the new generation of Hybrid Nanotechnology 3 in 1 with

its distinctive name CSC® (Clean-Shine-Coat

® ).

These products when applied to a surface providing 3 applications.

Clean , by using a powerful nanotechnology cleaning components the products CSC®

(Clean-Shine-Coat® ) clean the surface of all dirt’s, environmental pollutants, and blackness

that exist on the surface.

Shine , by using a powerful Gel coat components the products CSC® (Clean-Shine-Coat

®)

cover scratches or other gaps on the surface , while shiny surfaces and give them the shine

they had when they where news.

Coat , the csc4-yacht®

using nanoparticles of silicon dioxide SiO2 and using the latest

nanotechnology SolGel , seal the protected surface area which reduces adhesion of dirt

particles such as greasy and oily substances, lime as well as environmental pollutants due to

its hydrophobic and oleophobic effect, so that dirt like fat, salt, meals not find a way to

penetrate and stabilize, so they can be removed easily with a little water to sail without having

to rub the surface by mechanical or chemical means. At the same time csc4-yacht®

prevent

UV radiation to alter the color or quality of protected materials. The coating is extremely

strong, because you embody the overlapping area matches the material and thus allows for

optimization of the protective function.

External plastic ship surfaces

Fiberglass,

GRP,

Polycarbonate,

ABS,

In which surfaces you can use the csc4-yacht®

Advantages for the surfaces protected with the csc4-yacht®

Sealing and easy removing of stains and all type of dirt deposits on external ship surfaces.

The UV- stability enables functionality for a number of years, approximately the life time of the coated surface.

High-pressure /steam - cleaning resistance. 100% invisible does not affect the appearance of the surfaces Absolute resistance against ice Very good chemical and mechanical resistance Excellent efficiency with low consumption Save time and money by reducing usage of chemical detergents up to 90%. Helps protect the aquifer because of the large reduction of chemical cleaning

products.

1.Apply liberally with a clean paper, linen or microfibre cloth using circular motions.

2.An application time of 15-20 minutes is recommended for optimum effect.

3.Remove the white residue with a polishing machine. We recommend high speed and surface pressure. The polishing pad may need to be changed if it was contaminated too much by the residue. This SiO2 coating is fully integrated and cured after 24 hours. The easy-to-clean effect can be tested for the first time after this curing phase.

With 1 liter you can cover approx. 30-40 m2


Consumption

csc4-carprotect®

(Clean-Shine-Coat)

Cleaning – Shining -Sealing, protection and easy to

clean for car s surfaces

After years of studies in our laboratories in Germany our company NANO4LIFE EUROPE®

proudly presents in world exclusive the new generation of Hybrid Nanotechnology 3 in 1 with

its distinctive name CSC® (Clean-Shine-Coat

® ).

These products when applied to a surface providing 3 applications.

Clean , by using a powerful nanotechnology cleaning components the products CSC®

(Clean-Shine-Coat® ) clean the surface of all dirt’s, environmental pollutants, and blackness

that exist on the surface.

Shine , by using a powerful Gel coat components the products CSC® (Clean-Shine-Coat

®)

cover scratches or other gaps on the surface , while shiny surfaces and give them the shine

they had when they where news.

Coat , the csc4-car protect®

using nanoparticles of silicon dioxide SiO2 and using the

latest nanotechnology SolGel , seal the protected surface area which reduces adhesion of dirt

particles such as greasy and oily substances, lime as well as environmental pollutants due to

its hydrophobic and oleophobic effect, so that dirt like fat, salt, meals not find a way to

penetrate and stabilize, so they can be removed easily with a little water to sail without having

to rub the surface by mechanical or chemical means. At the same time csc4-car protect®

prevent UV radiation to alter the color or quality of protected materials. The coating is

extremely strong, because you embody the overlapping area matches the material and thus

allows for optimization of the protective function.

Cars

Motos

Trains

Buses

In which surfaces you can use the csc4-car protect®

Sealing and easy removing of stains and all type of dirt deposits on external cars surfaces.

The UV- stability enables functionality for a number of years, approximately the life time of the coated surface.

High-pressure /steam - cleaning resistance. 100% invisible does not affect the appearance of the surfaces Absolute resistance against ice Very good chemical and mechanical resistance Excellent efficiency with low consumption Save time and money by reducing usage of chemical detergents up to 90%. Helps protect the aquifer because of the large reduction of chemical cleaning

products.

1.Apply liberally with a clean paper, linen or microfibre cloth using circular motions.

2.An application time of 15-20 minutes is recommended for optimum effect.

3.Remove the white residue with a polishing machine. We recommend high speed and surface pressure. The polishing pad may need to be changed if it was contaminated too much by the residue. This SiO2 coating is fully integrated and cured after 24 hours. The easy-to-clean effect can be tested for the first time after this curing phase.

With 1 liter you can cover approx. 30-40 m2

Advantages for the surfaces protected with the csc4-car protect®


Consumption

product catalogue_en

Documents

nano4 premiumtextile

type of fabric

coating of fabrics

ecology product

everyday stains

little water

invisible layer coating

fabrics available