product catalogue - eltelnetworks.com · installed on existing ladder with vertical profile b 14...
TRANSCRIPT
PRODUCTCATALOGUE
2017
2 3Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi
Product Catalogue
Table of contents
For further information, inquiries and offers,
E-mail: [email protected]
www.turvatikas.fi
Eltel Networks CorporationLaturinkuja 802650 Espoo,FINLAND Tel. +358 20 411 211 Fax: +358 20 411 3200
Tabl
e of
Con
tent
s
Vertical Profile B 06Cleat Ladder TBA-I 07Cleat Ladder TBA-I with Releasable steps 08Cleat Ladder TBA-II 09Flange Ladder PTBJ 10Flange Ladder PTBR 11End Bow B 50 12Side-End Bow B 50 SR/SL 13End Bow PTBK 59 14
Horizontal Profile B 18Releasable Horizontal Carriage Stopper no. 86 19Horizontal Carriage Lead-in no.88 20Horizontal Carriage no. 951 21
Anti-Climb Device no.25 24Sleeve Joint no.70 25Cable Support no.72/74 26Top Cover no.80 27Vertical Carriage Lead-in no.82 28Carriage Guide no.84 29Releasable Vertical Carriage Stopper no.85 30Output Set no.87 31Carriage Stopper no.89 32Releasable Vertical Carriage Stopper no.851 33Landing no.104 34Landing no.105 35
Rung Fastener no. 10 38Basic Clamp no.15 39Universal Fasteners no. 20/21/22 40Pylon Fastener no. 31 41Level Fastener no. 32 42Steel Structure Fastener no. 33 43Angle Iron Fastener no. 34 44Wall Fastener no. 35 45Mast Fastener no.41/42 46Angle Iron Fastener no. 44 47Pole Fastener no. 45 48Pole Fastener no. 50/51/52 49OPGW Fastener no. 79 50Wall Mounts no. 114...119 51Flange Fastener no.461/462/463 52
Climbing Carriage no. 932 56Horizontal Carriage no. 951 57
Notes 58
PROFILES AND LADDERS
HORIZONTAL PROFILES
ACCESSORIES
FASTENERS
CARRIAGES
NOTES
Turvatikas Safety Ladder is an EN353-1:2014 Certified Safety System to prevent climbing accidents and provide work efficiency.
Zero severe accidents ever occurred with Turvatikas Safety Ladder. The system is reliable in all conditions as sand, dirt, snow or ice do not hamper the system.
4 5Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi
Vertical Profile B 06Cleat Ladder TBA-I 07Cleat Ladder TBA-I with Releasable steps 08Cleat Ladder TBA-II 09Flange Ladder PTBJ 10Flange Ladder PTBR 11End Bow B 50 12Side-End Bow B 50 SR/SL 13End Bow PTBK 59 14
Turvatikas Safety Ladder provides reliable solutions for climbing high structures.
Page
s 06
-14PROFILES AND LADDERS
6 7Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi
Vertical Profile BTo be installed on existing ladders or structures
ProductVertical Profile B
FeaturesDelivery lengths 3, 5 and 6 m,
holes for extension joints in both ends of profile.
Weight4,5 kg/m
Notes
MaterialHot-dip galvanized steel or
acid-proof stainless steel
MaterialHot-dip galvanized steel
ProductCleat Ladder TBA-1
FeaturesDelivery length 3m, holes for
extension joints in both ends of profile.
Welded U-profile rungs.
Weight5,5 kg/m
Notes
Cleat Ladder TBA-IComplete ladder structure.
For poles, masts and chimneys
Profi
les
and
Ladd
ers
8 9Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi
ProductCleat Ladder TBA-1
FeaturesDelivery length 3m, holes for
extension joints in both ends of profile.
Weight5,5 kg/m
Notes
MaterialHot-dip galvanized steel or
acid-proof stainless steel
MaterialHot-dip galvanized steel or acid-
proof stainless steel
ProductCleat Ladder TBA-II
FeaturesDelivery length 3m, holes for
extension joints in both ends of profile.
Welded U-profile rungs
Weight6,2 kg/m
Notes
Cleat Ladder TBA-I with Releasable stepsSteps can be removed to prevent climbing
Cleat Ladder TBA-IIComplete ladder structure.
For poles, masts and chimneys
Profi
les
and
Ladd
ers
10 11Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi
ProductFlange Ladder PTBR
FeaturesDelivery length 5,7m, holes for extension joints in both ends of
profile. Welded U-profile rungs.
Flanges with sleeve joints.
Weight12,7 kg/m
Notes
MaterialHot-dip galvanized steel
Flange Ladder PTBRComplete ladder structure.
Flange Ladder PTBJComplete ladder structure.
ProductFlange Ladder PTBJ
FeaturesDelivery length 3m, holes for
extension joints in both ends of profile.
Welded U-profile rungs.Flanges with sleeve joints.
Weight7,7 kg/m
Notes
MaterialHot-dip galvanized steel or
acid-proof stainless steel
Profi
les
and
Ladd
ers
12 13Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi
End Bow B 50Installed on existing ladder with Vertical Profile B
MaterialHot-dip galvanized steel or
acid-proof stainless steel
ProductEnd Bow B 50
FeaturesStraight section 1,65 m.
Weight15 kg
Notes
Profi
les
and
Ladd
ers
MaterialHot-dip galvanized steel or acid-
proof stainless steel
ProductSide-End Bow B 50 SR/SL
FeaturesAfter straight section 1,65 m
to right (SR) or to left (SL).
Weight15 kg
Notes
Side-End Bow B 50 SR/SLInstalled on existing ladder with Vertical Profile B
14 15Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi
End Bow PTBJ 59Used with Flange Ladder PTBJ.
ProductEnd Bow PTBJ 59
FeaturesAt the straight part are six (6) rungs.
Bending radius: appr. 665 mm.Hand rails can only to be used to-gether with Flange Ladder PTBK.Highest part of the hand rails will
be appr. 980 mm from the roof level.
Hand rails can be mounted to the roof top.
Weight30 kg
Notes
MaterialHot-dip galvanized steel or
acid-proof stainless steel
Profi
les
and
Ladd
ers
16 17Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi
HORIZONTAL PROFILES
Horizontal Profile B 18Releasable Horizontal Carriage Stopper no.86 19Horizontal Carriage Lead-in no.88 20Horizontal Carriage no. 951 21
Ultimate safety for horizontal levels
Page
s 18
-21
18 19Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi
ProductHorizontal Profile B
FeaturesSee above.
Weight4,5 kg/m
NotesMaterial and measurements simi-lar to the Vertical Profile B but wit-hout locking fins on the bottom. Fixing with Basic Clamps no 15
which are not included.
Materialhot-dip galvanized steel or
acid-proof stainless steel
Horizontal Profile BUsed with horizontal carriage on safety platforms.
Hor
izon
tal P
orfil
esH
oriz
onta
l Por
files
Materialhot-dip galvanized steel or
acid-proof stainless steel
ProductReleasable Horizontal Carriage
Stop no.86
FeaturesSee above.
Weight1,0 kg
NotesCompatible with Horizontal Profile VB based products.Also suitable for platforms.
Releasable Horizontal Carriage Stopper no.86To stop the Carriage at the end of the profile or at desired spots
20 21Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi
ProductHorizontal Carriage Lead-in no.88
FeaturesSee above.
Weight5,3 kg
NotesCompatible with Horizontal Profile VB based products.
Used e.g. along with smoke exhaust hatches or roof ladders.
Materialhot-dip galvanized steel or
acid-proof stainless steel
Horizontal Carriage Lead-in no.88Used with Vertical Profile VB to get Horizontal Carriage no.151 in or out of the profile at desired spots
Hor
izon
tal P
rofil
esH
oriz
onta
l Por
files
MaterialAcid-proof stainless steel
ProductHorizontal Carriage no.951
FeaturesSee above.
Weight0,7 kg
NotesSlides easily with moderate load.
Carriage is equipped with snap-hook.
Horizontal Carriage no.951Safety Carriage for use in horizontal movement only.
22 23Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi
ACCESSORIES
FLEXIBILITY
Turvatikas products are used on more than 40 countries by over 700 companies
Turvatikas products have evolved and adjusted to diverse customer need for over four decades.
Solutions for every need!
QUALITY
The safety carriage and rail combination is tested according to standard EN353-1:2014.
The production process conforms to quality management standards ISO9001:2015 and ISO14001:2015.
EASY ASSEMBLY
We provide fastening solutions to any target and offer design services for special fasteners. Our complete installation manuals and technical support offer help to any issue
at site.
Page
s 24
-35
Anti-Climb Device no.25 24Sleeve Joint no.70 25Cable Support no.72/74 26Top Cover no.80 27Vertical Carriage Lead-in no.82 28Carriage Guide no.84 29Releasable Vertical Carriage Stopper no.85 30Output Set no.87 31Carriage Stopper no.89 32Releasable Vertical Carriage Stopper no.851 33Landing no.104 34Landing no.105 35
24 25Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi
Anti-Climb Device no.25Prevent unauthorized climbing on the ladders.
ProductAnti-Climb Device no.25
FeaturesPrevent unauthorized climbing to
the Safety Ladders.Compatible with Safety Ladders
PTBJ, PTBK, TBA-1 and TBA-2.Locked with padlock (does not
include to the delivery)Available also with hinges.
Weight12,4 kg
NotesCompatible with Flange Ladders
PTBJ and PTBK and Cleat Lad-ders TBA-I and TBA-II.Locked with padlocks.
Padlocks are not included in delivery.
Materialhot-dip galvanized steel or
acid-proof stainless steel
Sleeve Joint no.70For connecting profile or ladder sections together
ProductSleeve joint no.70
FeaturesFor joining Profile and Safety Lad-
der sections together
Weight0,18 kg/pc
NotesCompatible with all
Vertical Profile B and Horizontal Profile VB based products.
Bolts, nuts and washers are included.
MaterialHot-dip galvanized steel or
acid-steel stainless steel
Acce
ssor
ies
26 27Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi
Cable Support no.72/74Cable support is used with Flange Ladder PTBJ or PTBK.
MaterialHot-dip galvanized steel or
acid-proof stainless steel
ProductCable Support no.72/74
FeaturesCompatible with Safety Ladder
PTBJ ja PTBK.For mounting cable to the left side
of the Safety Ladders.Cables to be mounted with cable
clamps (clamps are not included in the delivery)
Weight0,35 kg.
NotesCompatible with Flange Ladders
PTBJ and PTBK. It is attached to cross section of
rung and flange. Locked by hammering a lip on the support in, under the rung. Cable
is attached with clamp.
Acce
ssor
ies
Top Cover no. 80Used with Weather Protection no.60.
MaterialHot-dip galvanized steel or
acid-proof stainless steel
ProductTop Cover no.80
FeaturesTo be always used together with
Carriage Stopper 89.Suitable for vertical and horizontal
installed profiles
Weight0,5 kg.
NotesCompatible with all
Vertical Profile B and Horizontal Profile VB based products.
28 29Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi
Acce
ssor
ies
Vertical Carriage Lead-in no.82Used if carriage needs to be inserted or pulled out in the middle of profile.
ProductVertical Carriage Lead-in no.82
FeaturesSuitable for vertical profile.
For attach/detach carriage in midd-le of profile.
Available also as a retofit kit that could be installed to the existing
profile.
Weight1,2 kg.
NotesCompatible with Vertical Profile B
based products.
MaterialHot-dip galvanized steel or
acid-proof stainless steel
Carriage Guide no. 84To prevent incorrect insertion of the climbing carriage.
ProductCarriage Guide no.84
FeaturesTo prevent incorrect insertion of
the climbing carriage.To be used always at lower end of vertical profile together with verti-
cal carriage stopper no 851.To be used always at higher end of the vertical profile together with vertical carriage stopper no 85.
Weight0,45 kg.
NotesCompatible with all
Vertical Profile B and Horizontal Profile VB based products.
Bolt is included. To be used with Releasable
Vertical Carriage Stopper no 85.
MaterialHot-dip galvanized steel or
acid-proof stainless steel
30 31Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi
Acce
ssor
ies
Output Set no. 87Used if carriage needs to be guided into a Horizontal Profile VB in the
middle of the profile.
MaterialHot-dip galvanized steel or
acid-proof stainless steel
ProductOutput Set no.87
FeaturesFor turn carriage from vertical
profile to horizontal profile and vice versa
Weight7,0 kg.
NotesCompatible with Vertical Profile B
and ladders: TBA-I, TBA-II, PTBJ and PTBK.
Releasable Vertical Carriage Stopper no. 85Prevents carriage from slipping out unintended.
MaterialHot-dip galvanized steel or
acid-proof stainless steel
ProductReleasable Vertical Carriage
Stopper no.85
FeaturesReleasable carriage stopper to be installed on the holes for sleeve
joints at upper end of vertical profi-le to preven carriage from slipping
out unintended.To be always used with Carraige
Guide no 84
Weight0,25 kg.
NotesCompatible with all
Vertical Profile B based products. To be used with Carriage Guide
no.84.
32 33Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi
Carriage Stopper no.89Permanent carriage stopper to prevent the carriage from slipping out uninten-ded.
MaterialHot-dip galvanized steel or
acid-steel stainless steel
ProductCarriage Stopper no.89
FeaturesPermanent carriage stopper that
is installed to prevent carriage from slipping out from profile
unintended. To be installed on upper end of vertical profile or at the end of
horizontal profile.
Weight0,4 kg.
NotesCompatible with all
Vertical Profile B and Horizontal Profile VB based products.
Acce
ssor
ies
Releasable Vertical Carriage Stopper no.851Installed on lower end of vertical profile extension hoes to prevent carriage from
slipping out unintended.
ProductReleasable Vertical Carriage
Stopper no.851
FeaturesReleasable carriage stopper to be installed at lower end of vertical profile to prevent carriage from
slipping out unintended.To be always used with Carriage
Guide no 84.
Weight1,2 kg.
NotesCompatible with all
wVertical Profile B based pro-ducts.
MaterialHot-dip galvanized steel or
acid-steel stainless steel
34 35Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi
Acce
ssor
ies
Landing no.104Resting platform for standing.
ProductLanding no.104
FeaturesFor rest on the feets during clim-
bing.Folds away to not disturb climber when passing the LandingLevel.
Fits to Profile and all type of Safety Ladders.
Weight4,5 kg.
NotesLanding no 104 folds away and
allows easy access for the climber.Compatible with all
Vertical Profile B based products.
MaterialHot-dip galvanized steel or
acid-proof stainless steel
Landing no. 105Seat platform for resting.
MaterialHot-dip galvanized steel or
acid-proof stainless steel
ProductLanding no.105
FeaturesSeat platform for resting.
Does not prevent climbing.Fits to Profile and all type of Safety
ladders.
Weight4,5 kg.
NotesDoes not prevent climbing.
Compatible with all
Vertical profile B based products.
36 37Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi
FASTENERSThere is always a solution how the components can be installed, otherwise we will design it!
QUALITY
Continuous product development and a long history, this is why we can guaran-tee our products carefree, simplicity and security. Products last in rugged arctic, barren islands as well in wilderness wi-thstanding challenging circumstances.
EASY ASSEMBLY
All of our parts are made compatible and easy to install. Every part includes a user-friendly guide, and remember to look at the fascinating installation videos on our website!
FLEXIBILITY
Our products are designed in a way that we can ensure their compatibility, but still easy and simple to use.
Page
s 38
-52
Rung Fastener no. 10 38Basic Clamp no.15 39Universal Fasteners no. 20/21/22 30Pylon Fastener no. 31 41Level Fastener no. 32 42Steel Structure Fastener no. 33 43Angle Iron Fastener no. 34 44Wall Fastener no. 35 45Mast Fastener no.41/42 47Angle Iron Fastener no. 44 48Pole Fastener no. 45 46Pole Fastener no. 50/51/52 49OPGW Fastener no. 79 50Wall Mounts no. 114...119 51Flange Fastener no.461/462/463 52
38 39Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi
Rung Fastener no. 10For mounting Vertical Profile B existing ladders.
ProductRung Fastener no.10
FeaturesApplicable for rung diameters
16mm…25mm.
Weight0,5 kg.
NotesCompatible with all
Vertical Profile B based products.
MaterialHot-dip galvanized steel or
acid-proof stainless steel
Fast
ener
s
Basic Clamp no. 15For mounting profiles and ladders.
ProductBasic Clamp no.15
FeaturesTo mount profile or safetyladder to
the client’s own fastener Delivery includes bolts for locking
and mounting
Weight0,3 kg.
NotesCompatible with all
Vertical Profile B and Horizontal Profile VB based products .
MaterialHot-dip galvanized steel or
acid-proof stainless steel
40 41Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi
Fast
ener
sFa
sten
ers
Universal Fastener 20/21/22For mounting profiles and ladders to different kinds of steel structures.
MaterialHot-dip galvanized steel or
acid-proof stainless steel
ProductUniversal Fasteners 20/21/22
FeaturesSee above.
Weight0,9/1,1/1,6 kg.
NotesCompatible with all
Vertical Profile B and Horizontal Profile VB based products.
Pylon Fastener no. 31Used for fastening ladders to pylons.
MaterialHot-dip galvanized steel or
acid-proof stainless steel
ProductPylon Fastener no.31
FeaturesMaximum pylon diameter 800
mm. Free back clearance 120 mm.
Weight1,3 kg.
NotesCompatible with all
Vertical Profile B and Horizontal Profile VB based products.
Basic Clamp no 15 is included.
42 43Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi
Fast
ener
s
Level Fastener no. 32Mainly used with Horizontal Profile VB.
ProductLevel Fastener no.32
FeaturesSee above.
Weight0,7 kg.
NotesCompatible with all
Vertical Profile B and Horizontal Profile VB based products.
MaterialHot-dip galvanized steel or
acid-proof stainless steel
Steel Structure Fastener no. 33Used with different kinds of steel structures.
ProductSteel Structure Fastener no.33
FeaturesSee above.
Weight0,6 kg
.
NotesCompatible with all
Vertical Profile B and Horizontal Profile VB based products.
MaterialHot-dip galvanized steel or
acid-proof stainless steel
44 45Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi
Fast
ener
s
Angle Iron Fastener no. 34Suitable for L-profile structures.
ProductAngle Iron Fastener no. 34
FeaturesSuitable for L-profiles L80-200.
Weight1,5 kg.
NotesCompatible with all
Vertical Profile B based products.
MaterialHot-dip galvanized steel or
acid-proof stainless steel
Wall Fastener no. 35Used for fastening ladders to walls.
MaterialHot-dip galvanized steel or wacid-proof stainless steel
ProductWall Fastener no.35
FeaturesFree back clearance 200 mm.
Weight2,0 kg.
NotesCompatible with all
Vertical Profile B and Horizontal Profile VB based products.
Basic Clamp no 15 is included.
46 47Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi
Fast
ener
s
Mast Fastener no. 41/42For mounting profiles and ladders to tower members.
MaterialHot-dip galvanized steel or
acid-proof stainless steel
ProductMast Fastener no.41/42
FeaturesSee above.
Weight0,8 kg / 1,1 kg
NotesCompatible with all
Vertical Profile B.
Angle Iron Fastener no. 44Suitable for L-profile structures.
Weight2,8; 3,2; 6,2 kg
NotesCompatible with all
Vertical Profile B based products.
MaterialHot-dip galvanized steel or
acid-proof stainless steel
ProductAngle Iron Fastener no.44 /1, 44/2, 44/3
FeaturesSee above.
48 49Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi
Fast
ener
s
Pole Fastener no. 50/51/52Used with ladders with specified diameters.
MaterialHot-dip galvanized steel or
acid-proof stainless steel
ProductPole Fastener no.50/51/52
FeaturesSuitable pole diameters are
219,9 mm, 273 mm and 323,9 mm.
Weightapprox. 3 kg
NotesCompatible with all
Vertical Profile B based products.
Pole Fastener no. 45Used for installing ladders to various kinds of poles.
ProductPole Fastener no. 45
FeaturesFits to the poles diameter 88 - 219
mm.Distance between Safety Ladder
and the pole is adjustable between 120 - 170 mm.
The bolts in the delivery fits for the pole with diameter 130 - 180 mm.
Different length og the bolts will be delivered if requested
Weight5 kg
NotesCompatible with all
Vertical Profile B based products.
MaterialHot-dip galvanized steel or
acid-proof stainless steel
1 2 3 4
1 4
A
B
C
D
E
F
D
C
B
A
F
E
Osanumero / Part number
Pintakäsittely - Surface Finishing Väri - ColorToleranssit - Tolerances MassaWeight
MittakaavaScale
Suun. - Drawn by
Hyväk. - Approved by
OsaPart
OsanumeroPart number
Osan tai kokoonpanoryhmän nimitysDescription
Mitat, muoto, malliDimensions, shape, model
MateriaaliMaterial
Massa/kgWeight/kg
KplReg'd
Piirustusnumero / DWG.NO
Tässä oleva informaatio on Salomaan Konepaja Oy:n omaisuutta, eikä sitä saa jäljentää, näyttää kolmannelle osapuolelle tai käyttäämillään tavalla ilman Salomaan Konepaja Oy:n tai sen asianmukaisesti valtuuttaman edustajan nimenomaista kirjallista lupaa.
The information contained herein is proprietary to Salomaan Konepaja Oy and is not to be reproduced, communicated to a third person or usedin any manner whatsoever without the express written permission of Salomaan Konepaja Oy or a duly authorized representative thereof.
FITT2400/D88-D219KN 2.5.2017
3,049 kg
LS 28.4.2017
Putkikiinnike no 40 Ø88-Ø219 H=130-175Salomaan Konepaja Oy
LAIROLANTIE 1, 24910 HALIKKO ASPuh. (02) 7372 300 - Fax (02) 7372 301
www.salomaankonepaja.fi
Materiaali - Material
Ø88...Ø219
130...175
50 51Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi
Fast
ener
s
Wall Mounts no. 114...119For mounting ladders to wall.
ProductWall Mounts no.114...119
FeaturesSee above.
Weight2,0-3,0 kg.
NotesCompatible with Flange Ladder
PTBK based products.
MaterialHot-dip galvanized steel or
acid-proof stainless steel
OPGW Fastener no. 79Used with optical ground wire.
MaterialHot-dip galvanized steel or
acid-proof stainless steel
ProductOPGW Fastener no.79
FeaturesCoupler made of aluminum
Applicable for optical ground wire diameters 11mm…19mm.
Weight0,5 kg.
NotesCompatible with all
Vertical Profile B based products.
52 53Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi
Fast
ener
s
Flange Fastener no. 461/462/463For mounting ladders PTBJ to masts’ diagonals.
ProductFlange Fastener no.461/462/463
FeaturesSuitable profiles:
461: L35-70 462: L80-120 463: L130-150
Weight0,7 kg /0,9 kg /1,1 kg
NotesCompatible with Flange Ladder
PTBJ based products.
MaterialHot-dip galvanized steel or
acid-proof stainless steel
54 55Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi
CARRIAGESPPE that ensures your safety.
Page
s 56
-59
Climbing Carriage no.932 56Horizontal Carriage no.951 57Notes 58Fact Sheet 59
56 57Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi
ProductClimbing Carriage no.932
FeaturesSee above.
Horizontal Carriage no. 951Safety Carriage for use in horizontal movement only.
Climbing Carriage no. 932Used with Vertical Profile B based products. Shock absorber with snap-hook in carriage.
Weight1,0 kg
NotesCompatible with all
Vertical Profile B based products.Tested in accordance with the
applied methods EN 353-1:2014, prEN 353-1:2008 and
CNB/P/11.073.
MaterialAcid-proof stainless steel
MaterialAcid-proof stainless steel
ProductHorizontal Carriage no.951
FeaturesSuitable only for horizontal profile.
Comes with a carabiner
Weight0,7 kg.
NotesSlides easily with moderate load.
Carriage is equipped with snap-hook.
Carr
iage
s
Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi Turvatikas - Climb Safer and More Efficiently www.turvatikas.fi58 59
Not
es &
Fac
ts
Notes Fact Sheet
PRODUC T INFORMATION Produc t t ypeGuided t ype fa l l ar rester inc luding a r igid anchor l ine
Brand name Tur vat ik as Safet y Ladder
Provider Elte l Net works O y
CE number 0403
Mater ia lHot- dip galvanized steel , Acid proof steel - AIS I 316
Zink c lass M inimum layer thick ness 55µm
Zink corros iv i t y cate -gor y
C4 (EN 12944-2 and EN ISO 14713-1)
Appl icat ionsH igh struc tures, hor izontal levels and pre - exist ing ladders
CompatibleAl l Tur vat ik as Safet y Ladder compo -nents
Stopper tooth distance 15 cent imetres
Steel mater ia l S355MC/JJA EN 10149-2:2013
Del iver y lenghts3m (Al l produc ts) , 5m (Prof i le -B) , 5 .7m (PTBR, Prof i le -B) , 6m (Prof i le -B)
Warrant y per iod 36 months
Countr y of or igin Finland
PRODUC T CER TIFICATES EU EN353-1:2014
Germany DIN 5U001 ( TBA-2)
PRODUC TION CER TIFICATES Qual i t y ISO9001
Responsibi l i t y ISO14001
Qual i t y EN1090-1:2009+A1:2011
G alvanizat ion standard EN ISO 1461