product catalogue - d-ktc fluid control · 2018-06-22 · cnrl upgrading tranche 2 canada nynas...
TRANSCRIPT
D-KTC FLUID CONTROL S.r.l.
PRODUCT CATALOGUE
Office:
Via Giovanni Pacini, 93
20131 MILANO (MI) – ITALY
TEL. +39 (0)2 70608573
FAX +39 (0)2 26688354
Factory/Warehouse:
Località Pradaglie
29013 CARPANETO PIACENTINO (PC) – ITALY
TEL. +39 (0)523 853038
FAX +39 (0)523 850833
Banks Information
Banks: INTESA SAN PAOLO MILANO - ITALY
CARIPARMA CARPANETO – ITALY
BNL CARPANETO – ITALY
BANCA POPOLARE DI MILANO GALLARATE – ITALY
We would like to take this opportunity to introduce our company D-KTC Fluid Control: a complete
manufacturer of strainers, sight low indicators, sample coolers and special equipment that is been supplying
its products to Petrochemical , Chemical , Power , Nuclear and Onshore / Offshore industries worldwide since
its establishment in 1998.
D-KTC Fluid Control is a partner of ARMSTRONG INTERNATIONAL for steam/air traps, manifolds and steam /
air / hot water systems.
D-KTC Fluid Control is part of CHERO GROUP which includes CHERO PIPING for ittings and valve /
piping packages, thus giving us the advantage of being able to satisfy all of our customers piping project
requirements.
Our current manufacturing facilities - factory and workshop - are built over an area of 19.000 m2, out of which
5.000 m2 are covered (located in CARPANETO).
D-KTC Fluid Control is one of the very few companies worldwide who actually produces a complete range
of strainers and is therefore able to offer the best type and style of products / solutions to meet customers
speciications and applications.
Over the years D-KTC Fluid Control has developed an extensive range of pipeline ancillaries, Sight Flow
indicators , Sample Coolers, Conical , Y and Tee type Strainers , Bucket strainers and, thanks to our special
engineering division, strainers for special applications.
All items can be supplied in carbon steel and stainless steel and in most cases they are available in very short
delivery times directly from our stock.
Introduction
Customized materials are also available on request.
Manufacturing execution can be forged, cast or welded fabricated depending on the type and size.
D-KTC Fluid Control can supply strainers from ½” to 82” for ratings up to 4500 lbs.
Whenever additional ancillaries (especially for steam plants) are required, D-KTC Fluid Control is able to
complete the package supplying also all the other products manufactured within the CHERO GROUP, such
as ANSI Valves , ANSI Fittings , Ball Valves as well as Steam Separators, Condensate Recovery Pumps and
Vacuum Breakers.
D-KTC Fluid Control is a lexible and constantly developing company.
Within our technical department part of the staff is dedicated to research and development, to enable our
company to implement improvements or brand new products on a regular basis.
D-KTC Fluid Control’s quality, environment and safety systems are certiied according to ISO 9001, ISO 14001,
OHSAS 18001, PED 97/23/EC, TRCU 019/032 and ABSA.
Our quality assurance department is an independent body, ensuring that our quality assurance, environment
and safety procedures are respected and implemented throughout the entire cycle of the manufacturing
process.
We hope that you ind our range of products interesting. Should you require any further detail or additional
information concerning D-KTC Fluid Control, ARMSTRONG INTERNATIONAL or CHERO GROUP, please do not
hesitate to visit our website..... and to contact us at our premises, where we are at your complete disposal.
WWW.DKTCFLUIDCONTROL.COM
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 6
Reference List
PRODUCTS
35 COUNTRIES
120 PROJECTS
32 YEARS OF EXPERIENCE
1250
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 7
Tee Strainer
Flame Arrestors
• SONATRACH
Algeria
• EXXONMOBIL CHEMICALS
France
• Project PRIME G
France
• QATAR GAS LIQUEFIED GAS Co. (II)
Qatar
• GASCO RUWAIS
U.A.E.
• TOTAL Reinery of FEYZIN HDS 2nd Train
France
• Fos-Cavaou
France
• KHURSANIYAH GAS PLEIN
U.A.E.
• BRASKEM
Mexico
• ROTTERDAM NExBTL PLANT
The Netherlands
• SINGAPORE NExBTL PLANT
Singapore
• KURAIS
U.A.E.
• TERMINAL METHANIER
France
• KHARYAGA PHASE III - PROSERNAT
Russia
• CDU-4 PROJECT - MOHAMMEDIA
Morocco
• CNRL UPGRADING TRANCHE 2
Canada
• SAN NAZZARO PROJ. A128PM3177
Italy
• 3611 ARP KUWAIT (KW) EPC
Saudi Arabia
• QATAR LIQUIEFIED GAS Co.
Qatar
• ASTEXOL-2
Spain
• POTENZIAMENTO SVILUPPO VAL D’AGRI
DBN GAS FASE 2
Italy
• LUKOIL NEFTOKIN BURGAS
Bulgaria
• SAFCO V UREA STAND ALONE PROJECT
Saudi Arabia
• TULA-SALAMANCA
Italy
• BOROUGE III PROJECT - XH - MR -907
Italy
• LUKOIL NEFTOKIN BURGAS
Bulgaria
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 8
Exhaust Heads
Sight Glasses
• GROUP LOTOS S.A.
Poland
• ULTRA LOW SULPHER DIESEL PROJECT
Saudi Arabia
• SAMIR UPGRADE PROJECT
Morocco
• GASCO
Abu Dhabi
• RLOC
Qatar
• NIJNI NOVGOROD INTEGRATED VINYLS PLANT
Russia
• SOBEGI’
France
• 9631 U-IKRA PROJECT
Russia
• IKRA PROJECT
Germany
• PROGETTO EST
Italy
• PMP PROJECT
Qatar
• SATAH FULL FIELD DEVELOPMENT
U.A.E.
• S.O.C. CMMP ICOEEP
Singapore
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 9
Manifolds
Sample Panel
• GASCO
U.A.E.
• CEPSA
Spain
• LDPE/EVA TUBULAR REACTOR LINE
France
• Temparossa
Italy
• NSRP Proj
Vietnam
• 30606 (MHC UNIT) IPLOM
Italy
• PROJECT 30647 NYNAS SRU
Sweden
• SATORP
Saudi Arabia
• SATORP
Saudi Arabia
• LMG PROJECT
Poland
• NYNAS REFINERY
Norway
• Lukoil Neftokim Burgas
Bulgaria
• Braskem
Messico
• SATORP
Saudi Arabia
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 10
Sample Coolers
• GASCO RUWAIS
U.A.E.
• GASCO RUWAIS
U.A.E.
• KHURSANIYAH GAS PLEIN
U.A.E.
• KHURSANIYAH GAS PLEIN
U.A.E.
• KURAIS
U.A.E.
• QATAR FERT.CO. QAFCO 5
Qatar
• AL-JUBAIL PROJ. 10009807
Saudi Arabia
• SOBEGI’
France
• LUKOIL NEFTOKIN BURGAS
Bulgaria
• DANGOTE
Nigeria
• Proj Nghi Son Thanh Hoa
Vietnam
Pot Strainers
• AL-JUBAIL PROJ.
Saudi Arabia
• BOROUGE III PROJECT - XH - MR -907
Italy
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 11
Coalescer Filters
Steam Tramp
• ARZEW - LNG
Algeria
• QATAR FERT.CO. QAFCO 5
Qatar
• GASCO RUWAIS
U.A.E.
• DUNG QUAT REFINERY
Vietnam
• GROUP LOTOS S.A.
Poland
• ENGRO CHEMICAL PAKISTAN LTD
Pakistan
• 5229 RUWAIS THIRD NGL TRAIN
Abu Dhabi
• GDANSK REFINERY RESIDUE
Poland
• AL-JUBAIL
Saudi Arabia
• EAD ENDESA
Chile
• NESTE OIL
Netherlands
• SATORP
Saudi Arabia
• 2329-UPGRADING TRANCHE 2 PROJECT
Canada
• AIR LIQUID SINES
Portogallo
• D11 HEATER 101 REVAMPING PROJECT
Sweden
• CM02 PECEM
Brasile
• LMG PROJECT
Poland
• 2400-DCU EXPANSION
Canada
• SOBEGI’
France
• SULPHUR GRANULATION PLANT
Saudi Arabia
• 5229 RUWAIS TR-3
U.A.E.
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 12
Conical Strainers
• TOTAL Reinery of FEYZIN HDS 2nd Train
France
• Fos-Cavaou
France
• SINGAPORE NExBTL PLANT
Singapore
• ROTTERDAM NExBTL PLANT
The Netherlands
Duplex
• LUKOIL NEFTOKIN BURGAS
Italy
• UTE Porto do PECEM
Brazil
• CDU-4 PROJECT - MOHAMMEDIA
Morocco
• ASTEXOL-2
Spain
• LUKOIL NEFTOKIN BURGAS
Bulgaria
• NYNAS REFINERY
Norway
• SAFCO V UREA STAND ALONE PROJECT
Saudi Arabia
• TULA-SALAMANCA
Italy
• BOROUGE III PROJECT - XH - MR -907
Italy
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 13
Y Strainers
• EXXONMOBIL CHEMICALS
France
• GASCO RUWAIS
U.A.E.
• NIOC
Iran
• SONATRACH
Algeria
• KHURSANIYAH GAS PLEIN
U.A.E.
• Project PRIME G
France
• Ras Laffan Olein Project
Qatar
• KURAIS
U.A.E.
• REPSOL PETROLEO
Spagna
• DUNG QUAT REFINERY
Vietnam
• Fos-Cavaou LNG Terminal
France
• SAUDI KAYAN
U.A.E.
• SOGIF - FOS SUR MER
France
• RLOC
Qatar
• ROTTERDAM NExBTL PLANT
The Netherlands
• TECHNIP KTI Project
Poland
• OFFSHORE ASSOCIATED GASES EPC PACKAGE
U.A.E.
• UTE Porto do PECEM
Brazil
• JER PACKAGE 2A
Saudi Arabia
• LMG PROJECT
Poland
• KHARYAGA PHASE III - PROSERNAT
Russia
• BIOMASS POWER PLANT
Italy
• CNRL UPGRADING TRANCHE 2
Canada
• NYNAS PROJ. 30647/A0053
Norway
• ASTEXOL-2
Spain
• POTENZIAMENTO SVILUPPO VAL D’AGRI
DBN GAS FASE 2
Italy
• SHAH SULPHUR STATION AND PIPELINES
PROJECT
U.A.E.
• SAFCO V UREA STAND ALONE PROJECT
Saudi Arabia
• SONARA PROJECT
Cameroon
• CIUDEN PROJECT
Spain
• TULA-SALAMANCA
Italy
• ETHYDCO
Egypt
• BOROUGE III PROJECT - XH - MR -907
Italy
• ITALY to BAHRAIN
Sita Kingdom of Bahrain
CERTIFICATIONS
������������������
����� ������� ������������������
�����������������������������������������
�������������
�������������� ����������
�����
���������
���� �����������
��� �������������������������������������������������������������� ���������������������������� �� ������ �����������������������������
�����
����������
����� ���������������
��������� ��������� �������������
�������������
������ � ��
��������� �������������
�� ���� ����
���������
����������������������
�������� � ������������ ������������������������� �� �������������� ���
������������������������������������������������ ����������������������������������������������������������� ������������������������������
������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������
��������������������������� ��������������������������������� � �������������������������
������������������������ ������������������������������������������������������������������������������������������������� ���������
��� ����¡���� ��������
� �� ����
�����������
������������������
Our Y Forged Strainer section includes two different types of strainers.
In the following sections you can visualize the characteristics of the desired strainer.
FORGED“Y” STRAINERS
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 26
FORGED STEEL “Y”D-KTC
YSF800
Designed according to ANSI B16.34 strainer bodies are
produced with a higher wall thickness to increase corrosion
allowance.
Standard stainers are equipped with screens for the average
service of most luids (steam, gas, air, oil, chemicals, ect.).
A large screen open area ensures an eficent iltering action
with a low pressure drop.
Filtering area to inlet area ratio is higher than 3 to 1.
Screens area is manufactured with perforated plate in the
materials and with the perforation speciied in the relevant
tables. Screens with different peforation (or wire mesh) and
materials can be manufactured on request.
WRONGWRONG CORRECTCORRECT
All strainers should be mounted as close as possible to the valve or machinery they are installed to
protect. It is important to ensure that the strainer is installed with the low following the same direction
of the low direction arrow cast on the strainer body.
In horizontal or inclined pipelines, ensure that the screen housing is always mounted below the pipeline.
In vertical pipelines “ Y “ – strainers should never be installed in upward low condition.
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 27
POS. DESCRIPTION MATERIALS SPARES
1 Body ASTM A105N ASTM A182 F316
1.1 Flange ASTM A105N ASTM A182 F316
2 Screen SS 316 SS 316 X
3 Plug ASTM A105N ASTM A182 F316
4 Gasket 316 / GRAPHITE 316 / GRAPHITE X
5 Drain plug ASTM A105N ASTM A182 F316
6 Bolting ASTM A193 B7/A 194 2HASTM A320 L7/ASTM
A194 2Gr.4
POS.6 (BOLTED COVER) : F800 2” ONLYOTHER MATERIALS ON REQUEST
LIMITING CONDITIONS YSF800 (according to ISO 6552 ):
According to the body rating (ANSI B 16.34)
F800 –ANSI 800.
OTHER RATINGS ON REQUEST
CONNECTIONS
Screwed ANSI B1.20.1 (NPT) / BS21 (BSP)
Buttweld ASME B 16.25
Socket Welding ANSI B16.11
Flanged ANSI / UNI / DIN
HOW TO SERVICE
Strainer maintenace should be made at least once a year, or whenever the pressure drop is higher than normal igures. A quick clean-up system, to be performed approximately once a month, is to blow off small impurities trough the drain-plug (5). It is recommended to install a drain valve on a nipple to the drain hole to speed-up this operation. For a complete maintenance follow the points here below: 1- Be sure that the main line has been shut off. 2- Remove cover (3) and gasket (4). 3- Remove screen (2) and carefully inspect it for damages. If any hole in the screen is clogged up, clean it with compressed air and / or any suitable tool. If the screen is broken in any part or out of shape, replace it with a new spare one. Never reinstall a broken, bent or deformed screen. 4- Carefully clean the inside of the strainer body. 5- Fit a new gasket (4). 6- Install the new screen or the cleaned one (2). Be sure to center the screen in the upper seat. 7- Put cover in place (3). Be sure that drain plug (5) is closed. 8- Slowly give pressure to the line, checking for leakages. 9- Write on the strainer body the date of this maintenance operation.
Flanged
Size (inches)
DRAIN PLUG S H H1 C Weight
(kg)
UNI-DINPN16-25-40
SF Kg
150#
SF Kg
300#
SF Kg
600#
SF Kg
¾” ¼” 90 60 85 41 1 - - - - - - - -
½” ¼” 90 60 85 41 1 150 2.6 165 2.3 165 2.8 165 3.2
¾” ¼” 110 75 100 46 1.2 170 4 191 3.2 191 4.3 191 4.7
1” ¼” 130 93 140 56 2 200 4.4 216 4.2 216 5.3 216 5.8
1½” ¼” 180 144 200 85 6 240 11 241 9.7 241 15 241 12.9
2” ½” 185 140 200 100 7 230 13 292 12 292 15 292 16.3
2.½” ½” 185 140 200 100 7 282 16 294 18 308 20
STANDARD PERFORATIONS 0.8mmSPECIAL PERFORATIONS ON REQUESTDimensions : S, H , H1 , C , SF are in millimeters (mm)
8
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 28
YSF1500
FORGED STEEL “Y”D-KTC
WRONGWRONG CORRECTCORRECT
All strainers should be mounted as close as possible to the valve or machinery they are installed to
protect. It is important to ensure that the strainer is installed with the low following the same direction
of the low direction arrow cast on the strainer body.
In horizontal or inclined pipelines, ensure that the screen housing is always mounted below the pipeline.
In vertical pipelines “ Y “ – strainers should never be installed in upward low condition.
Designed according to ANSI B16.34 strainer bodies are
produced with a higher wall thickness to increase corrosion
allowance.
Standard stainers are equipped with screens for the average
service of most luids (steam, gas, air, oil, chemicals, ect.).
A large screen open area ensures an eficent iltering action
with a low pressure drop.
Filtering area to inlet area ratio is higher than 3 to 1.
Screens area is manufactured with perforated plate in the
materials and with the perforation speciied in the relevant
tables. Screens with different peforation (or wire mesh) and
materials can be manufactured on request.
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 29
POS. DESCRIPTION MATERIALS SPARES
1 Body ASTM A105N ASTM A182 F316
1.1 Flange ASTM A105N ASTM A182 F316
2 Screen SS 316 SS 316 X
3 Plug ASTM A105N ASTM A182 F316
4 Gasket 316 / GRAPHITE 316 / GRAPHITE X
5 Drain plug ASTM A105N ASTM A182 F316
6 Bolting ASTM A193 B7/A 194 2HASTM A320 L7/ASTM
A194 2Gr.4
POS.6 (BOLTED COVER) : F1500 ½” ONLYOTHER MATERIALS ON REQUEST
LIMITING CONDITIONS YSF800 (according to ISO 6552 ):
According to the body rating (ANSI B 16.34)
F1500 – ANSI 1500.
CONNECTIONS
Screwed ANSI B1.20.1 (NPT) / BS21 (BSP)
Buttweld ASME B 16.25
Socket Welding ANSI B16.11
Flanged ANSI / UNI / DIN
Flanged
Size (inches) DRAIN PLUG S H H1 C Weight(kg)
1500#SF Kg
1/2” 1/
4” 110 75 100 46 1.4 216 5.5
3/4” 1/
4” 130 93 140 56 2.2 229 7
1” 1/4” 180 144 200 85 6.2 254 13
11/2” 1/
2” 185 140 200 100 7.5 305 19
STANDARD PERFORATIONS 0.8mmSPECIAL PERFORATIONS ON REQUESTDimension : S, H , H1 , C , SF are in millimeters (mm)
HOW TO SERVICE
Strainer maintenace should be made at least once a year, or whenever the pressure drop is higher than normal igures. A quick clean-up system, to perform approximately once a month, is to blow off small impurities trough the drain-plug (5). It is reccomanded to install a drain valve on a nipple to the drain hole to speed-up this operation. For a complete maintenance follow the points herebelow: 1- Be sure that the main line has been shut off. 2- Remove cover (3) and gasket (4). 3- Remove screen (2) and carefully inspect it for damages. If any hole in the screen is clogged up, clean it with compressed air and / or any suitable tool. If the screen is broken in any part or out of shape, replace it with a new spare one. Never reinstall a broken, bent or deformed screen. 4- Carefully clean the inside of the strainer body. 5- Fit a new gasket (4). 6- Install the new screen or the cleaned one (2). Be sure to center the screen in the upper seat. 7- Put cover in place (3). Be sure that drain plug (5) is closed. 8- Slowly give pressure to the line, checking for leakages. 9- Write on the strainer body the date of this maintenance operation.
Our Y Cast Strainer section includes twenty different types of strainers.
In the following tabs you can visualize the table of the desired strainer.
CAST
“Y” STRAINERS
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 32
YSC150
CAST STEEL “Y”D-KTC
Designed according to ANSI B16.34 strainer bodies are
produced with a higher wall thickness to increase corrosion
allowance.
Standard stainers are equipped with screens for the average
service of most luids (steam, gas, air, oil, chemicals, ect.).
A large screen open area ensures an eficent iltering action
with a low pressure drop.
Filtering area to inlet area ratio is higher than 3 to 1.
Screens area is manufactured with perforated plate in the
materials and with the perforation speciied in the relevant
tables. Screens with different peforation (or wire mesh) and
materials can be manufactured on request.
WRONGWRONG CORRECTCORRECT
1
1
All strainers should be mounted as close as possible to the valve or machinery they are installed to
protect. It is important to ensure that the strainer is installed with the low following the same direction
of the low direction arrow cast on the strainer body.
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 33
LIMITING CONDITIONS YSF800 (according to ISO 6552 ):
According to the body rating (ANSI B 16.34)
C150 – ANSI 150.
OTHER RATING ON REQUEST
MAINTENANCE
Strainer maintenace should be made at least once a year, or whenever the pressure drop is higher than normal igures. A quick clean-up system, to perform approximately once a month, is to blow off small impurities trough the drain-plug (5). It is raccomanded to install a drain valve by a nipple to the drain hole to speed-up this operation. For a complete maintenance follow the points herebelow: 1- Be sure that the main line has been shut off. 2- Remove cover (3) and gasket (4). 3- Remove screen (2) and carefully inspect it for damages. If any hole in the screen is clogged up, clean it with compressed air and / or any suitable tool. If the screen is broken in any part or out of shape, replace it with a new spare one. Never reinstall a broken or distorted screen. 4- Carefully clean the inside of the strainer body. 5- Fit a new gasket (4). 6- Install the new screen or the cleaned one (2). Be sure to center the screen in the upper seat. 7- Put cover in place (3). Be sure that drain plug (5) is closed. 8- Slowly give pressure to the line, checking for leakages. 9- Write on the strainer body the date of this maintenance operation.
POS. DESCRIPTION MATERIALS SPARES
1 Body ASTM A216 WCB Astm A351 CF8M
2 Bonnet ASTM A105 Astm A182 F316
3 Screen SS 316 SS 316 X
4 Gasket SS 316 / Graph. SS 316 / Graph. X
5 Stud Bolts ASTM A193 B7 ASTM A320 L7
6 Nuts ASTM A194 2H ASTM A194 Gr.4
7 Drain Plug ASTM A105 ASTM A182 F316
OTHER MATERIALS ON REQUEST
Size (inches) ½ ¾ 1 1.½ 2” 3” 4” 6” 8” 10” 12” 14” 16” 18” 20” 24”
S(RF) [mm] 108 117 127 165 203 241 292 406 495 622 699 788 914 978 978 1295
S[mm] 108 117 127 165 203 241 292 406 495 622 699 788 914 978 978 1295
H[mm] 67 73 87 120 140 210 270 360 460 570 700 770 870 975 1095 1300
H1[mm] 180 210 240 270 190 260 340 400 580 660 800 1200 1400 1530 1750 2040
Weight [kg] 6 9 11 20 14 26 40 68 140 190 270 350 640 700 895 1370
STANDARD PERFORATIONS: 1.5 mmSPECIAL PERFORATIONS ON REQUESTDRAIN PLUG: ¾” NPT
2
2
CONNECTIONS
Buttweld ASME B 16.25
Flanged ASME B 16.5
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 34
YSC300
Designed according to ANSI B16.34 strainer bodies are
produced with a higher wall thickness to increase corrosion
allowance.
Standard stainers are equipped with screens for the average
service of most luids (steam, gas, air, oil, chemicals, ect.).
A large screen open area ensures an eficent iltering action
with a low pressure drop.
Filtering area to inlet area ratio is higher than 3 to 1.
Screens area is manufactured with perforated plate in the
materials and with the perforation speciied in the relevant
tables. Screens with different peforation (or wire mesh) and
materials can be manufactured on request.
WRONGWRONG CORRECTCORRECT
4
4
All strainers should be mounted as close as possible to the valve or machinery they are installed to
protect. It is important to ensure that the strainer is installed with the low following the same direction
of the low direction arrow cast on the strainer body.
CAST STEEL “Y”D-KTC
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 35
LIMITING CONDITIONS YSF800 (according to ISO 6552 ):
According to the body rating (ANSI B 16.34)
C300 – ANSI 300.
MAINTENANCE
Strainer maintenace should be made at least once a year, or whenever the pressure drop is higher than normal igures. A quick clean-up system, to perform approximately once a month, is to blow off small impurities trough the drain-plug (5). It is raccomanded to install a drain valve by a nipple to the drain hole to speed-up this operation. For a complete maintenance follow the points herebelow: 1- Be sure that the main line has been shut off. 2- Remove cover (3) and gasket (4). 3- Remove screen (2) and carefully inspect it for damages. If any hole in the screen is clogged up, clean it with compressed air and / or any suitable tool. If the screen is broken in any part or out of shape, replace it with a new spare one. Never reinstall a broken or distorted screen. 4- Carefully clean the inside of the strainer body. 5- Fit a new gasket (4). 6- Install the new screen or the cleaned one (2). Be sure to center the screen in the upper seat. 7- Put cover in place (3). Be sure that drain plug (5) is closed. 8- Slowly give pressure to the line, checking for leakages. 9- Write on the strainer body the date of this maintenance operation.
POS. DESCRIPTION MATERIALS SPARES
1 Body ASTM A216 WCB Astm A351 CF8M
2 Bonnet ASTM A105 Astm A182 F316
3 Screen SS 316 SS 316 X
4 Gasket SS 316 / Graph. SS 316 / Graph. X
5 Stud Bolts ASTM A193 B7 ASTM A320 L7
6 Nuts ASTM A194 2H ASTM A194 Gr.4
7 Drain Plug ASTM A105 ASTM A182 F316
OTHER MATERIALS ON REQUEST
5
5
CONNECTIONS
Buttweld ASME B 16.25
Flanged ASME B 16.5
Size (inches) ½” ¾” 1” 1.½” 2” 3” 4” 6” 8” 10” 12” 14” 16” 18” 20” 24”
S (RF) [mm] 152 178 203 229 267 318 356 445 559 622 711 838 864 978 1061 1346
S[mm] 152 178 203 229 267 318 356 445 559 622 711 838 864 978 1061 1346
H[mm] 70 80 115 128 175 240 330 380 500 625 740 805 920 1025 1140 1360
H1[mm] 150 170 240 260 250 275 360 470 575 920 1100 1200 1360 1350 1700 2050
Weight [kg] 6 9 11 20 20 45 65 105 180 254 430 670 750 863 1125 1625
STANDARD PERFORATIONS: 1.5 mm SPECIAL PERFORATIONS ON REQUESTDRAIN PLUG: ¾” NPT
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 36
YSC600
Designed according to ANSI B16.34 strainer bodies are
produced with a higher wall thickness to increase corrosion
allowance.
Standard stainers are equipped with screens for the average
service of most luids (steam, gas, air, oil, chemicals, ect.).
A large screen open area ensures an eficent iltering action
with a low pressure drop.
Filtering area to inlet area ratio is higher than 3 to 1.
Screens area is manufactured with perforated plate in the
materials and with the perforation speciied in the relevant
tables. Screens with different peforation (or wire mesh) and
materials can be manufactured on request.
WRONGWRONG CORRECTCORRECT
7
7
All strainers should be mounted as close as possible to the valve or machinery they are installed to
protect. It is important to ensure that the strainer is installed with the low following the same direction
of the low direction arrow cast on the strainer body.
CAST STEEL “Y”D-KTC
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 37
LIMITING CONDITIONS YSF800 (according to ISO 6552 ):
According to the body rating (ANSI B 16.34)
C600 – ANSI 600
MAINTENANCE
Strainer maintenace should be made at least once a year, or whenever the pressure drop is higher than normal igures. A quick clean-up system, to perform approximately once a month, is to blow off small impurities trough the drain-plug (5). It is raccomanded to install a drain valve by a nipple to the drain hole to speed-up this operation. For a complete maintenance follow the points herebelow: 1- Be sure that the main line has been shut off. 2- Remove cover (3) and gasket (4). 3- Remove screen (2) and carefully inspect it for damages. If any hole in the screen is clogged up, clean it with compressed air and / or any suitable tool. If the screen is broken in any part or out of shape, replace it with a new spare one. Never reinstall a broken or distorted screen. 4- Carefully clean the inside of the strainer body. 5- Fit a new gasket (4). 6- Install the new screen or the cleaned one (2). Be sure to center the screen in the upper seat. 7- Put cover in place (3). Be sure that drain plug (5) is closed. 8- Slowly give pressure to the line, checking for leakages. 9- Write on the strainer body the date of this maintenance operation.
POS. DESCRIPTION MATERIALS SPARES
1 Body ASTM A216 WCB Astm A351 CF8M
2 Bonnet ASTM A105 Astm A182 F316
3 Screen SS 316 SS 316 X
4 Gasket SS 316 / Graph. SS 316 / Graph. X
5 Stud Bolts ASTM A193 B7 ASTM A320 L7
6 Nuts ASTM A194 2H ASTM A194 Gr.4
7 Drain Plug ASTM A105 ASTM A182 F316
OTHER MATERIALS ON REQUEST
CONNECTIONS
Buttweld ASME B 16.25
Flanged ASME B 16.5
Size(inches) ½” ¾” 1” 1.½” 2” 3” 4” 6” 8” 10” 12” 14” 16”
S (RTJ) [mm] 165 191 203 216 295 259 435 562 663 790 841 892 994
S(RF)[mm] 165 191 203 216 292 356 432 559 660 787 838 889 991
S[mm] 165 191 203 216 292 356 432 559 660 787 838 889 991
H[mm] 120 140 115 170 193 260 310 400 500 600 720 865 991
H1[mm] 180 210 240 240 270 320 400 530 650 790 1200 1420 1520
Weight [kg] 6 9 11 11 35 60 95 230 400 590 700 770 1140
STANDARD PERFORATIONS: 1.5 mm SPECIAL PERFORATIONS ON REQUESTDRAIN PLUG: ¾” NPT
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 38
YSC900
Designed according to ANSI B16.34 strainer bodies are
produced with a higher wall thickness to increase corrosion
allowance.
Standard stainers are equipped with screens for the average
service of most luids (steam, gas, air, oil, chemicals, ect.).
A large screen open area ensures an eficent iltering action
with a low pressure drop.
Filtering area to inlet area ratio is higher than 3 to 1.
Screens area is manufactured with perforated plate in the
materials and with the perforation speciied in the relevant
tables. Screens with different peforation (or wire mesh) and
materials can be manufactured on request.
WRONGWRONG CORRECTCORRECT
10
10
All strainers should be mounted as close as possible to the valve or machinery they are installed to
protect. It is important to ensure that the strainer is installed with the low following the same direction
of the low direction arrow cast on the strainer body.
CAST STEEL “Y”D-KTC
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 39
LIMITING CONDITIONS YSF800 (according to ISO 6552 ):
According to the body rating (ANSI B 16.34)
C600 – ANSI 600
MAINTENANCE
Strainer maintenace should be made at least once a year, or whenever the pressure drop is higher than normal igures. A quick clean-up system, to perform approximately once a month, is to blow off small impurities trough the drain-plug (5). It is raccomanded to install a drain valve by a nipple to the drain hole to speed-up this operation. For a complete maintenance follow the points herebelow: 1- Be sure that the main line has been shut off. 2- Remove cover (3) and gasket (4). 3- Remove screen (2) and carefully inspect it for damages. If any hole in the screen is clogged up, clean it with compressed air and / or any suitable tool. If the screen is broken in any part or out of shape, replace it with a new spare one. Never reinstall a broken or distorted screen. 4- Carefully clean the inside of the strainer body. 5- Fit a new gasket (4). 6- Install the new screen or the cleaned one (2). Be sure to center the screen in the upper seat. 7- Put cover in place (3). Be sure that drain plug (5) is closed. 8- Slowly give pressure to the line, checking for leakages. 9- Write on the strainer body the date of this maintenance operation.
CONNECTIONS
Buttweld ASME B 16.25
Flanged ASME B 16.5
11
Size(inches) ½” ¾” 1” 1.½” 2” 3” 4” 6” 8” 10” 12” 14” 16”
S (RTJ) [mm] 165 191 203 216 295 259 435 562 663 790 841 892 994
S(RF)[mm] 165 191 203 216 292 356 432 559 660 787 838 889 991
S[mm] 165 191 203 216 292 356 432 559 660 787 838 889 991
H[mm] 120 140 115 170 193 260 310 400 500 600 720 865 991
H1[mm] 180 210 240 240 270 320 400 530 650 790 1200 1420 1520
Weight [kg] 6 9 11 11 35 60 95 230 400 590 700 770 1140
STANDARD PERFORATIONS: 1.5 mm SPECIAL PERFORATIONS ON REQUESTDRAIN PLUG: ¾” NPT
POS. DESCRIPTION MATERIALS SPARES
1 Body ASTM A216 WCB Astm A351 CF8M
2 Screen S.S. 304 S.S. 316 X
3 Cover ASTM A105 ASTM A240 316
4 Gasket RJ ARMCO F316 X
5 Drain Plug ASTM A105 AISI 316
6 Studs ASTM A193 B7 ASTM A320 L7
7 Nuts ASTM A194 2H ASTM A194 Gr.4
OTHER MATERIALS ON REQUEST
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 40
Designed according to ANSI B16.34 strainer bodies are
produced with a higher wall thickness to increase corrosion
allowance.
Standard stainers are equipped with screens for the average
service of most luids (steam, gas, air, oil, chemicals, ect.).
A large screen open area ensures an eficent iltering action
with a low pressure drop.
Filtering area to inlet area ratio is higher than 3 to 1.
Screens area is manufactured with perforated plate in the
materials and with the perforation speciied in the relevant
tables. Screens with different peforation (or wire mesh) and
materials can be manufactured on request.
WRONGWRONG CORRECTCORRECT
13
13
All strainers should be mounted as close as possible to the valve or machinery they are installed to
protect. It is important to ensure that the strainer is installed with the low following the same direction
of the low direction arrow cast on the strainer body.
YSC1500
CAST STEEL “Y”D-KTC
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 41
LIMITING CONDITIONS YSF800 (according to ISO 6552 ):
According to the body rating (ANSI B 16.34)
C1500 – ANSI 1500
MAINTENANCE
Strainer maintenace should be made at least once a year, or whenever the pressure drop is higher than normal igures. A quick clean-up system, to perform approximately once a month, is to blow off small impurities trough the drain-plug (5). It is raccomanded to install a drain valve by a nipple to the drain hole to speed-up this operation. For a complete maintenance follow the points herebelow: 1- Be sure that the main line has been shut off. 2- Remove cover (3) and gasket (4). 3- Remove screen (2) and carefully inspect it for damages. If any hole in the screen is clogged up, clean it with compressed air and / or any suitable tool. If the screen is broken in any part or out of shape, replace it with a new spare one. Never reinstall a broken or distorted screen. 4- Carefully clean the inside of the strainer body. 5- Fit a new gasket (4). 6- Install the new screen or the cleaned one (2). Be sure to center the screen in the upper seat. 7- Put cover in place (3). Be sure that drain plug (5) is closed. 8- Slowly give pressure to the line, checking for leakages. 9- Write on the strainer body the date of this maintenance operation.
CONNECTIONS
Buttweld ASME B 16.25
Flanged ASME B 16.5
POS. DESCRIPTION MATERIALS SPARES
1 Body ASTM A216 WCB Astm A351 CF8M
2 Screen S.S. 304 S.S. 316 X
3 Cover ASTM A105 ASTM A240 316
4 Gasket RJ ARMCO F316 X
5 Drain Plug ASTM A105 AISI 316
6 Studs ASTM A193 B7 ASTM A320 L7
7 Nuts ASTM A194 2H ASTM A194 Gr.4
OTHER MATERIALS ON REQUEST
14
Size(inches) 2” 3” 4” 6” 8”
S (RTJ)[mm] 371 473 549 711.5 842
S(RF)[mm] 368 470 546 705 832
S[mm] 368 470 546 705 832
H[mm] 250 325 375 480 620
H1[mm] 400 540 600 750 900
Weight[kg] 60 100 160 400 600
STANDARD PERFORATIONS: 1.5 mm SPECIAL PERFORATIONS ON REQUEST DRAIN PLUG: 3⁄4” NPT
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 42
Designed according to ANSI B16.34 strainer bodies are
produced with a higher wall thickness to increase corrosion
allowance.
Standard stainers are equipped with screens for the average
service of most luids (steam, gas, air, oil, chemicals, ect.).
A large screen open area ensures an eficent iltering action
with a low pressure drop.
Filtering area to inlet area ratio is higher than 3 to 1.
Screens area is manufactured with perforated plate in the
materials and with the perforation speciied in the relevant
tables. Screens with different peforation (or wire mesh) and
materials can be manufactured on request.
WRONGWRONG CORRECTCORRECT
16
16
All strainers should be mounted as close as possible to the valve or machinery they are installed to
protect. It is important to ensure that the strainer is installed with the low following the same direction
of the low direction arrow cast on the strainer body.
YSC1500 Pressure Seal
CAST STEEL “Y”D-KTC
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 43
LIMITING CONDITIONS YSF800 (according to ISO 6552 ):
According to the body rating (ANSI B 16.34)
C1500 – ANSI 1500
MAINTENANCE
Strainer maintenace should be made at least once a year, or whenever the pressure drop is higher than normal igures. A quick clean-up system, to perform approximately once a month, is to blow off small impurities trough the drain-plug (5). It is raccomanded to install a drain valve by a nipple to the drain hole to speed-up this operation. For a complete maintenance follow the points herebelow: 1- Be sure that the main line has been shut off. 2- Remove cover (3) and gasket (4). 3- Remove screen (2) and carefully inspect it for damages. If any hole in the screen is clogged up, clean it with compressed air and / or any suitable tool. If the screen is broken in any part or out of shape, replace it with a new spare one. Never reinstall a broken or distorted screen. 4- Carefully clean the inside of the strainer body. 5- Fit a new gasket (4). 6- Install the new screen or the cleaned one (2). Be sure to center the screen in the upper seat. 7- Put cover in place (3). Be sure that drain plug (5) is closed. 8- Slowly give pressure to the line, checking for leakages. 9- Write on the strainer body the date of this maintenance operation.
CONNECTIONS
Buttweld ASME B 16.25
Flanged ASME B 16.5
17
POS. DESCRIPTION MATERIALS SPARES
1 Body ASTM A216 WCB Astm A351 CF8M
2 Bonnet ASTM A105 Astm A182 F316
3 Screen SS 304 SS 316 X
4 Gasket SS 304 A182 F316 X
5 Stud Bolts ASTM A193 B7 ASTM A320 L7
6 Nuts ASTM A194 2H A194 Gr.4
7 Drain Plug A105 S.S. 316
8 Disk Joint ASTM A105 A182 F316
9 Retain ring ASTM A182 F6 A182 F6
10 Ring ASTM A182 F6 A182 F6
OTHER MATERIALS ON REQUEST
Size(inches) 10” 12” 14” 16”
S(RTJ) [mm] 1000 1146 1276 1407
S(RF) [mm] 991 1130 1257 1384
S [mm] 864 991 1067 1194
H [mm] 700 800 970 1150
H1 [mm] 1100 1300 1500 1700
Weight [kg] 1200 1500 2320 2750
STANDARD PERFORATIONS: 1.5 mm SPECIAL PERFORATIONS ON REQUEST DRAIN PLUG: 3⁄4” NPT
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 44
Designed according to ANSI B16.34 strainer bodies are
produced with a higher wall thickness to increase corrosion
allowance.
Standard stainers are equipped with screens for the average
service of most luids (steam, gas, air, oil, chemicals, ect.).
A large screen open area ensures an eficent iltering action
with a low pressure drop.
Filtering area to inlet area ratio is higher than 3 to 1.
Screens area is manufactured with perforated plate in the
materials and with the perforation speciied in the relevant
tables. Screens with different peforation (or wire mesh) and
materials can be manufactured on request.
WRONGWRONG CORRECTCORRECT
22
22
All strainers should be mounted as close as possible to the valve or machinery they are installed to
protect. It is important to ensure that the strainer is installed with the low following the same direction
of the low direction arrow cast on the strainer body.
YSC2500 Pressure Seal
CAST STEEL “Y”D-KTC
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 45
LIMITING CONDITIONS YSF800 (according to ISO 6552 ):
According to the body rating (ANSI B 16.34)
C1500 – ANSI 1500
MAINTENANCE
Strainer maintenace should be made at least once a year, or whenever the pressure drop is higher than normal igures. A quick clean-up system, to perform approximately once a month, is to blow off small impurities trough the drain-plug (5). It is raccomanded to install a drain valve by a nipple to the drain hole to speed-up this operation. For a complete maintenance follow the points herebelow: 1- Be sure that the main line has been shut off. 2- Remove cover (3) and gasket (4). 3- Remove screen (2) and carefully inspect it for damages. If any hole in the screen is clogged up, clean it with compressed air and / or any suitable tool. If the screen is broken in any part or out of shape, replace it with a new spare one. Never reinstall a broken or distorted screen. 4- Carefully clean the inside of the strainer body. 5- Fit a new gasket (4). 6- Install the new screen or the cleaned one (2). Be sure to center the screen in the upper seat. 7- Put cover in place (3). Be sure that drain plug (5) is closed. 8- Slowly give pressure to the line, checking for leakages. 9- Write on the strainer body the date of this maintenance operation.
CONNECTIONS
Buttweld ASME B 16.25
Flanged ASME B 16.5
SIZE
6”- 8”- 10”- 12”
14”- 16”
POS. DESCRIPTION MATERIALS SPARES
1 Body ASTM A216 WCB Astm A351 CF8M
2 Bonnet ASTM A105 Astm A182 F316
3 Screen SS 304 SS 316 X
4 Gasket SS 304 A182 F316 X
5 Stud Bolts ASTM A193 B7 ASTM A320 L7
6 Nuts ASTM A194 2H A194 Gr.4
7 Drain Plug A105 S.S. 316
8 Disk Joint ASTM A105 A182 F316
9 Retain ring ASTM A182 F6 A182 F6
10 Ring ASTM A182 F6 A182 F6
OTHER MATERIALS ON REQUEST
Size (inches) 6” 8” 10” 12” 14”
S(RTJ) [mm] 927 1038 1292 1444 -
S [mm] 610 762 914 1041 1118
H [mm] 580 570 750 800 820
H1 [mm] 820 850 1100 1200 1250
Weight [kg] - - - - -
STANDARD PERFORATIONS: 1.5 mm SPECIAL PERFORATIONS ON REQUEST DRAIN PLUG: 3⁄4” NPT
23
Our Tee Strainer section includes seven different types of strainers.
In the following tabs you can visualize the table of the desired strainer.
“Tee” STRAINERS
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 48
Strainer maintenace should be made at least once year,
or whenever the pressure drop is found to be in Designed
according to ANSI B16.34 strainer bodies are produced with a
higher wall thickness to increase corrosion allowance.
Standard stainers are equipped with screens for the average
service of most gases & luids (steam, gas, air, oil, chemicals,
ect.). A large screen open area ensures an eficent iltering
action with a low pressure drop.
Filtering area to inlet area ratio is higher than 3 to 1.
Screens area is manufactured with perforated plate in the
materials and with the perforation speciied in the relevant
tables. Screens with different perforation (or wire mesh) and
materials can be manufactured on request it is possible to
manufacture screens.
WRONGWRONG CORRECTCORRECT
TS150
“Tee” STRAINERD-KTC
All strainers should be mounted as close as possible to the valve or machinery they are installed to
protect. It is important to ensure that the strainer is installed with the low following the same direction
of the low direction arrow cast on the strainer body.
In horizontal or inclined pipelines, ensure that the screen housing is always mounted below the pipeline.
In vertical pipelines “ Tee “ – strainers should never be installed in upward low condition. (see above)
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 49
CONNECTIONS
Buttweld ANSI B16.25
Flanged ANSI B16.5
(Not for TS2500 - CLAMPED)
POS. DESCRIPTION MATERIALS SPARES
1 Body ASTM A234 WPB ASTM A420 WPL6ASTM WP 403
F316ASTM A234 WP5
1.2 Flange ASTM A105 ASTM A350 LF2 ASTM A182 F316 ASTM A182 F5
1.3 Guide rods S.S. 304 S.S. 304 S.S. 304 S.S. 304
2 Blind lange ASTM A105 ASTM A350 LF2 ASTM A182 F316 ASTM A182 F5
3 *Basket S.S. 304 S.S. 304 S.S. 304 S.S. 304 X
4 Gasket SS316/Graph. SS316/Graph. SS316/Graph. SS316/Graph. X
5 Stud Bolts ASTM A193 B7 ASTM A320 L7 ASTM A320 L7 ASTM A193 B7
6 Nuts ASTM A194 2H ASTM A194 Gr.4 ASTM A194 Gr.4 ASTM A194 2H
7 Plug ASTM A105 ASTM A350 LF2 ASTM A182 F316 ASTM A182 F5
OTHER MATERIALS ON REQUEST* BASKET TYPE: V - W - WW - Z. Basket coniguration depend of % ratio requested by customer
Size (inches) 2” 3” 4” 6” 8” 10” 12” 16” 18” 20” 24” 26”
S 127 172 210 286 356 432 508 610 686 762 864 990
SF 254 312 363 464 560 636 737 864 966 1052 1169 1235
H 148 182 208 260 311 351 403 472 525 571 635 688
Dimension : SF , S , H are in millimeters ( mm)
MAINTENANCE
Strainer maintenace should be made at least once a year, or whenever the pressure drop is higher than normal igures. A quick clean-up system, to perform approximately once a month, is to blow off small impurities trough the drain-plug (5). It is raccomanded to install a drain valve by a nipple to the drain hole to speed-up this operation. For a complete maintenance follow the points herebelow: 1- Be sure that the main line has been shut off. 2- Untighten cover stud bolts (5) and nuts (6) and remove cover [blind flange] (2) and gasket (4). 3- Remove basket (3) and carefully inspect it for damages. If any hole in the screen is clogged up, clean it with compressed air and / or any suitable tool. If the screen is broken in any part or out of shape, replace it with a new spare one. 4- Carefully clean the inside of the strainer body. 5- Fit a new gasket (4). 6- Install the new screen or the cleaned one (3). 7- Put cover in place (2). 8- Slowly give pressure to the line, checking for leakages. 9- Write on the strainer body the date of this maintenance operation.
V Type W Type WW Type Z Type
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 50
Strainer maintenace should be made at least once year,
or whenever the pressure drop is found to be in Designed
according to ANSI B16.34 strainer bodies are produced with a
higher wall thickness to increase corrosion allowance.
Standard stainers are equipped with screens for the average
service of most gases & luids (steam, gas, air, oil, chemicals,
ect.). A large screen open area ensures an eficent iltering
action with a low pressure drop.
Filtering area to inlet area ratio is higher than 3 to 1.
Screens area is manufactured with perforated plate in the
materials and with the perforation speciied in the relevant
tables. Screens with different perforation (or wire mesh) and
materials can be manufactured on request it is possible to
manufacture screens.
WRONGWRONG CORRECTCORRECT
TS300
“Tee” STRAINERD-KTC
All strainers should be mounted as close as possible to the valve or machinery they are installed to
protect. It is important to ensure that the strainer is installed with the low following the same direction
of the low direction arrow cast on the strainer body.
In horizontal or inclined pipelines, ensure that the screen housing is always mounted below the pipeline.
In vertical pipelines “ Tee “ – strainers should never be installed in upward low condition. (see above)
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 51
CONNECTIONS
Buttweld ANSI B16.25
Flanged ANSI B16.5
(Not for TS2500 - CLAMPED)
POS. DESCRIPTION MATERIALS SPARES
1 Body ASTM A234 WPB ASTM A420 WPL6ASTM WP 403
F316ASTM A234 WP5
1.2 Flange ASTM A105 ASTM A350 LF2 ASTM A182 F316 ASTM A182 F5
1.3 Guide rods S.S. 304 S.S. 304 S.S. 304 S.S. 304
2 Blind lange ASTM A105 ASTM A350 LF2 ASTM A182 F316 ASTM A182 F5
3 *Basket S.S. 304 S.S. 304 S.S. 304 S.S. 304 X
4 Gasket SS316/Graph. SS316/Graph. SS316/Graph. SS316/Graph. X
5 Stud Bolts ASTM A193 B7 ASTM A320 L7 ASTM A320 L7 ASTM A193 B7
6 Nuts ASTM A194 2H ASTM A194 Gr.4 ASTM A194 Gr.4 ASTM A194 2H
7 Plug ASTM A105 ASTM A350 LF2 ASTM A182 F316 ASTM A182 F5
OTHER MATERIALS ON REQUEST* BASKET TYPE: V - W - WW - Z. Basket coniguration depend of % ratio requested by customer
Size (inches) 2” 3” 4” 6” 8” 10” 12” 16” 18” 20” 24”
S 127 172 210 286 356 432 508 610 686 762 864
SF 268 332 382 483 579 668 769 903 1004 1086 1201
H 158 197 225 281 333 385 438 511 565 609 673
Dimension : SF , S , H are in millimeters ( mm)
MAINTENANCE
Strainer maintenace should be made at least once a year, or whenever the pressure drop is higher than normal igures. A quick clean-up system, to perform approximately once a month, is to blow off small impurities trough the drain-plug (5). It is raccomanded to install a drain valve by a nipple to the drain hole to speed-up this operation. For a complete maintenance follow the points herebelow: 1- Be sure that the main line has been shut off. 2- Untighten cover stud bolts (5) and nuts (6) and remove cover [blind flange] (2) and gasket (4). 3- Remove basket (3) and carefully inspect it for damages. If any hole in the screen is clogged up, clean it with compressed air and / or any suitable tool. If the screen is broken in any part or out of shape, replace it with a new spare one. 4- Carefully clean the inside of the strainer body. 5- Fit a new gasket (4). 6- Install the new screen or the cleaned one (3). 7- Put cover in place (2). 8- Slowly give pressure to the line, checking for leakages. 9- Write on the strainer body the date of this maintenance operation.
V Type W Type WW Type Z Type
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 52
Strainer maintenace should be made at least once year,
or whenever the pressure drop is found to be in Designed
according to ANSI B16.34 strainer bodies are produced with a
higher wall thickness to increase corrosion allowance.
Standard stainers are equipped with screens for the average
service of most gases & luids (steam, gas, air, oil, chemicals,
ect.). A large screen open area ensures an eficent iltering
action with a low pressure drop.
Filtering area to inlet area ratio is higher than 3 to 1.
Screens area is manufactured with perforated plate in the
materials and with the perforation speciied in the relevant
tables. Screens with different perforation (or wire mesh) and
materials can be manufactured on request it is possible to
manufacture screens.
WRONGWRONG CORRECTCORRECT
TS600
“Tee” STRAINERD-KTC
All strainers should be mounted as close as possible to the valve or machinery they are installed to
protect. It is important to ensure that the strainer is installed with the low following the same direction
of the low direction arrow cast on the strainer body.
In horizontal or inclined pipelines, ensure that the screen housing is always mounted below the pipeline.
In vertical pipelines “ Tee “ – strainers should never be installed in upward low condition. (see above)
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 53
CONNECTIONS
Buttweld ANSI B16.25
Flanged ANSI B16.5
(Not for TS2500 - CLAMPED)
POS. DESCRIPTION MATERIALS SPARES
1 Body ASTM A234 WPB ASTM A420 WPL6ASTM WP 403
F316ASTM A234 WP5
1.2 Flange ASTM A105 ASTM A350 LF2 ASTM A182 F316 ASTM A182 F5
1.3 Guide rods S.S. 304 S.S. 304 S.S. 304 S.S. 304
2 Blind lange ASTM A105 ASTM A350 LF2 ASTM A182 F316 ASTM A182 F5
3 *Basket S.S. 304 S.S. 304 S.S. 304 S.S. 304 X
4 Gasket SS316/Graph. SS316/Graph. SS316/Graph. SS316/Graph. X
5 Stud Bolts ASTM A193 B7 ASTM A320 L7 ASTM A320 L7 ASTM A193 B7
6 Nuts ASTM A194 2H ASTM A194 Gr.4 ASTM A194 Gr.4 ASTM A194 2H
7 Plug ASTM A105 ASTM A350 LF2 ASTM A182 F316 ASTM A182 F5
OTHER MATERIALS ON REQUEST* BASKET TYPE: V - W - WW - Z. Basket coniguration depend of % ratio requested by customer
Size (inches) 2” 3” 4” 6” 8” 10” 12” 16” 18” 20” 24”
S 127 172 210 286 356 432 508 610 686 762 864
SF 286 351 427 535 636 750 833 979 1067 1156 1284
H 177 216 260 324 382 492 574 624 676 753 673
Dimension : SF , S , H are in millimeters ( mm)
MAINTENANCE
Strainer maintenace should be made at least once a year, or whenever the pressure drop is higher than normal igures. A quick clean-up system, to perform approximately once a month, is to blow off small impurities trough the drain-plug (5). It is raccomanded to install a drain valve by a nipple to the drain hole to speed-up this operation. For a complete maintenance follow the points herebelow: 1- Be sure that the main line has been shut off. 2- Untighten cover stud bolts (5) and nuts (6) and remove cover [blind flange] (2) and gasket (4). 3- Remove basket (3) and carefully inspect it for damages. If any hole in the screen is clogged up, clean it with compressed air and / or any suitable tool. If the screen is broken in any part or out of shape, replace it with a new spare one. 4- Carefully clean the inside of the strainer body. 5- Fit a new gasket (4). 6- Install the new screen or the cleaned one (3). 7- Put cover in place (2). 8- Slowly give pressure to the line, checking for leakages. 9- Write on the strainer body the date of this maintenance operation.
V Type W Type WW Type Z Type
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 54
Strainer maintenace should be made at least once year,
or whenever the pressure drop is found to be in Designed
according to ANSI B16.34 strainer bodies are produced with a
higher wall thickness to increase corrosion allowance.
Standard stainers are equipped with screens for the average
service of most gases & luids (steam, gas, air, oil, chemicals,
ect.). A large screen open area ensures an eficent iltering
action with a low pressure drop.
Filtering area to inlet area ratio is higher than 3 to 1.
Screens area is manufactured with perforated plate in the
materials and with the perforation speciied in the relevant
tables. Screens with different perforation (or wire mesh) and
materials can be manufactured on request it is possible to
manufacture screens.
WRONGWRONG CORRECTCORRECT
TS900
“Tee” STRAINERD-KTC
All strainers should be mounted as close as possible to the valve or machinery they are installed to
protect. It is important to ensure that the strainer is installed with the low following the same direction
of the low direction arrow cast on the strainer body.
In horizontal or inclined pipelines, ensure that the screen housing is always mounted below the pipeline.
In vertical pipelines “ Tee “ – strainers should never be installed in upward low condition. (see above)
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 55
CONNECTIONS
Buttweld ANSI B16.25
Flanged ANSI B16.5
(Not for TS2500 - CLAMPED)
POS. DESCRIPTION MATERIALS SPARES
1 Body ASTM A234 WPB ASTM A420 WPL6ASTM WP 403
F316ASTM A234 WP5
1.2 Flange ASTM A105 ASTM A350 LF2 ASTM A182 F316 ASTM A182 F5
1.3 Guide rods S.S. 304 S.S. 304 S.S. 304 S.S. 304
2 Blind lange ASTM A105 ASTM A350 LF2 ASTM A182 F316 ASTM A182 F5
3 *Basket S.S. 304 S.S. 304 S.S. 304 S.S. 304 X
4 Gasket SS316/Graph. SS316/Graph. SS316/Graph. SS316/Graph. X
5 Stud Bolts ASTM A193 B7 ASTM A320 L7 ASTM A320 L7 ASTM A193 B7
6 Nuts ASTM A194 2H ASTM A194 Gr.4 ASTM A194 Gr.4 ASTM A194 2H
7 Plug ASTM A105 ASTM A350 LF2 ASTM A182 F316 ASTM A182 F5
OTHER MATERIALS ON REQUEST* BASKET TYPE: V - W - WW - Z. Basket coniguration depend of % ratio requested by customer
Size (inches) 2” 3” 4” 6” 8” 10” 12” 16” 18” 20” 24”
S 127 172 210 286 356 432 508 610 686 762 864
SF 343 389 453 579 694 813 922 1056 1157 1271 1462
H 219 242 279 353 419 485 549 626 689 752 879
Dimension : SF , S , H are in millimeters ( mm)
MAINTENANCE
Strainer maintenace should be made at least once a year, or whenever the pressure drop is higher than normal igures. A quick clean-up system, to perform approximately once a month, is to blow off small impurities trough the drain-plug (5). It is raccomanded to install a drain valve by a nipple to the drain hole to speed-up this operation. For a complete maintenance follow the points herebelow: 1- Be sure that the main line has been shut off. 2- Untighten cover stud bolts (5) and nuts (6) and remove cover [blind flange] (2) and gasket (4). 3- Remove basket (3) and carefully inspect it for damages. If any hole in the screen is clogged up, clean it with compressed air and / or any suitable tool. If the screen is broken in any part or out of shape, replace it with a new spare one. 4- Carefully clean the inside of the strainer body. 5- Fit a new gasket (4). 6- Install the new screen or the cleaned one (3). 7- Put cover in place (2). 8- Slowly give pressure to the line, checking for leakages. 9- Write on the strainer body the date of this maintenance operation.
V Type W Type WW Type Z Type
Our Pot Strainer section includes six different types of strainers divided in two series.
In the following tabs you can visualize the table of the desired strainer.
“Pot” STRAINERS
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 58
D-KTC Pot strainers have been speciically designed to meet all
customer requirements including high pressure applications.
Designed and fabricated according to ASME VIII Div.1 as
standard version, they can also be supplied according to other
pressure vessel regulations. I.e. ASME B31.3 etc.
Standard features include low pressure drops at high velocities,
stainless steel perforated baskets, vents and drains with the
possibility to supply davit lifts, quick open closures, DP gauges.
We are also able to manufacture customer requests following.
PSW150
“Pot” STRAINERD-KTC
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 59
MAINTENANCE
Strainer maintenace should be made at least once a year, or whenever the pressure drop is higher than normal igures. A quick clean-up system, to perform approximately once a month, is to blow off small impurities trough the drain-plug (5). It is raccomanded to install a drain valve by a nipple to the drain hole to speed-up this operation. For a complete maintenance follow the points herebelow: 1- Be sure that the main line has been shut off. 2- Untighten cover stud bolts (5) and nuts (6) and remove cover [blind flange] (2) and gasket (4). 3- Remove basket (3) and carefully inspect it for damages. If any hole in the screen is clogged up, clean it with compressed air and / or any suitable tool. If the screen is broken in any part or out of shape, replace it with a new spare one. 4- Carefully clean the inside of the strainer body. 5- Fit a new gasket (4). 6- Install the new screen or the cleaned one (3). 7- Put cover in place (2). 8- Slowly give pressure to the line, checking for leakages. 9- Write on the strainer body the date of this maintenance operation.
POS. DESCRIPTION MATERIALS NOTE
1 Body ASTM A106
2 Cover ASTM A105
3 Gasket 316 / GRAPHITE
4 Studs ASTM A193 B7
5 Nuts ASTM A194 2H
5 Drain plug ASTM A105N
6
Screen Stainless Steel
Perf. Plate Stainless Steel
Mesh Stainless Steel
7 Drain ASTM A105 Plugged ¾” NPT
8 Vent ASTM A105 Plugged ¾” NPT
9* Lifting eyes Carbon Steel For cover only
10 Legs Carbon Steel On request
* Davit on request
Size(inches) 1½” 2” 3” 4” 5” 6” 8” 10” 12” 14” 16” 18” 20” 24”
S (mm) 356 356 381 406 406 508 559 13 889 940 1067 1067 1092 1219
B (mm) 305 305 318 356 381 432 533 635 711 838 914 991 1118 1524
C (mm) 163 178 203 210 241 241 279 330 368 400 464 464 553 553
D (mm) 168 168 168 219 273 273 324 406 457 508 610 610 762 762
Kg 40.0 43.1 46.7 77.1 104.3 108.9 154.2 272.2 349.3 440.0 616.9 635.0 870.9 997.9
NOTES : Inlet / Outlet langes are according to ANSI B16.5
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 60
D-KTC Pot strainers have been speciically designed to meet all
customer requirements including high pressure applications.
Designed and fabricated according to ASME VIII Div.1 as
standard version, they can also be supplied according to other
pressure vessel codes. I.e. ASME B31.3 etc.
Standard features include low pressure drops at high velocities,
stainless steel perforated baskets, vents and drains with the
possibility to supply davit lifts, quick open closures, DP gauges.
We are also able to manufacture customer requests following.
PSW300
“Pot” STRAINERD-KTC
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 61
MAINTENANCE
Strainer maintenace should be made at least once a year, or whenever the pressure drop is higher than normal igures. A quick clean-up system, to perform approximately once a month, is to blow off small impurities trough the drain-plug (5). It is raccomanded to install a drain valve by a nipple to the drain hole to speed-up this operation. For a complete maintenance follow the points herebelow: 1- Be sure that the main line has been shut off. 2- Untighten cover stud bolts (5) and nuts (6) and remove cover [blind flange] (2) and gasket (4). 3- Remove basket (3) and carefully inspect it for damages. If any hole in the screen is clogged up, clean it with compressed air and / or any suitable tool. If the screen is broken in any part or out of shape, replace it with a new spare one. 4- Carefully clean the inside of the strainer body. 5- Fit a new gasket (4). 6- Install the new screen or the cleaned one (3). 7- Put cover in place (2). 8- Slowly give pressure to the line, checking for leakages. 9- Write on the strainer body the date of this maintenance operation.
POS. DESCRIPTION MATERIALS NOTE
1 Body ASTM A106
2 Cover ASTM A105
3 Gasket 316 / GRAPHITE
4 Studs ASTM A193 B7
5 Nuts ASTM A194 2H
5 Drain plug ASTM A105N
6
Screen Stainless Steel
Perf. Plate Stainless Steel
Mesh Stainless Steel
7 Drain ASTM A105 Plugged ¾” NPT
8 Vent ASTM A105 Plugged ¾” NPT
9* Lifting eyes Carbon Steel For cover only
10 Legs Carbon Steel On request
* Davit on request
Size(inches) 1½” 2” 3” 4” 5” 6” 8” 10” 12” 14” 16” 18” 20” 24”
S (mm) 356 356 381 406 445 553 584 838 914 965 1092 1092 1130 1264
B (mm) 305 305 318 356 381 432 533 635 711 838 914 991 1118 1524
C (mm) 229 229 229 241 279 279 318 368 406 445 508 508 610 610
D (mm) 168 168 168 219 273 273 324 406 457 508 610 610 762 762
Kg 69.2 72.6 79.4 131.5 181.4 192.8 274.4 464.9 603.3 757.5 1059.1 1115.8 1537.7 1780.4
NOTES : Inlet / Outlet langes are according to ANSI B16.5
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 62
D-KTC Pot strainers have been speciically designed to meet all
customer requirements including high pressure applications.
Designed and fabricated according to ASME VIII Div.1 as
standard version, they can also be supplied according to other
pressure vessel codes. I.e. ASME B31.3 etc.
Standard features include low pressure drops at high velocities,
stainless steel perforated baskets, vents and drains with the
possibility to supply davit lifts, quick open closures, DP gauges.
We are also able to manufacture customer requests following.
PSW900
“Pot” STRAINERD-KTC
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 63
MAINTENANCE
Strainer maintenace should be made at least once a year, or whenever the pressure drop is higher than normal igures. A quick clean-up system, to perform approximately once a month, is to blow off small impurities trough the drain-plug (5). It is raccomanded to install a drain valve by a nipple to the drain hole to speed-up this operation. For a complete maintenance follow the points herebelow: 1- Be sure that the main line has been shut off. 2- Untighten cover stud bolts (5) and nuts (6) and remove cover [blind flange] (2) and gasket (4). 3- Remove basket (3) and carefully inspect it for damages. If any hole in the screen is clogged up, clean it with compressed air and / or any suitable tool. If the screen is broken in any part or out of shape, replace it with a new spare one. 4- Carefully clean the inside of the strainer body. 5- Fit a new gasket (4). 6- Install the new screen or the cleaned one (3). 7- Put cover in place (2). 8- Slowly give pressure to the line, checking for leakages. 9- Write on the strainer body the date of this maintenance operation.
POS. DESCRIPTION MATERIALS NOTE
1 Body ASTM A106
2 Cover ASTM A105
3 Gasket 316 / GRAPHITE
4 Studs ASTM A193 B7
5 Nuts ASTM A194 2H
5 Drain plug ASTM A105N
6
Screen Stainless Steel
Perf. Plate Stainless Steel
Mesh Stainless Steel
7 Drain ASTM A105 Plugged ¾” NPT
8 Vent ASTM A105 Plugged ¾” NPT
9* Lifting eyes Carbon Steel For cover only
10 Legs Carbon Steel
* Davit on request
Size(inches) 20”
S (mm) 1410
B (mm) 1525
C (mm) 1064
D (mm) 762
Kg 6621
NOTES : Inlet / Outlet langes are according to ANSI B16.5
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 64
D-KTC Pot strainers have been speciically designed to
meet all customer requirements including for high pressure
applications. Designed and fabricated to ASME VIII Div.1 as
standard but can also be supplied to other pressure vessel
codes. I.e. ASME B31.3 etc.
Standard features include low pressure drops at high velocities,
stainless steel perforated baskets as standard, vents and drains
with the possibility to supply davit lifts, quick open closures,
DP gauges. We are also able to manufacture against customer
requests in all types of materials.
PSC150/300/600
“Pot” STRAINERD-KTC
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 65
MAINTENANCE
Strainer maintenace should be made at least once a year, or whenever the pressure drop is higher than normal igures. A quick clean-up system, to perform approximately once a month, is to blow off small impurities trough the drain-plug (5). It is raccomanded to install a drain valve by a nipple to the drain hole to speed-up this operation. For a complete maintenance follow the points herebelow: 1- Be sure that the main line has been shut off. 2- Untighten cover stud bolts (5) and nuts (6) and remove cover [blind flange] (2) and gasket (4). 3- Remove basket (3) and carefully inspect it for damages. If any hole in the screen is clogged up, clean it with compressed air and / or any suitable tool. If the screen is broken in any part or out of shape, replace it with a new spare one. 4- Carefully clean the inside of the strainer body. 5- Fit a new gasket (4). 6- Install the new screen or the cleaned one (3). 7- Put cover in place (2). 8- Slowly give pressure to the line, checking for leakages. 9- Write on the strainer body the date of this maintenance operation.
POS. DESCRIPTION MATERIALS SPARE
1 Body ASTM A216 WCB ASTM A351 CF8(M)
2 Screen SS304 SS304/SS316 X
3 Gasket SW 316/Graphite SW 316/Graphite X
4 Cover ASTM A105N ASTM A182 F304/316
5 Bolts ASTM A193 B7 ASTM A193 B8
6 Nuts ASTM A194 2H ASTM A194 Gr.8
7/8 Drain/Vent ASTM A105N
9* Lifting eyes: on request
* Davit on request
POT STRAINER PSC150Size
(inches) 2” 3” 4” 6” 8” 10” 12” 14” 16”
h1 (mm) 110 140 160 180 240 315 350 395 430
h (mm) 207 265 350 500 650 850 950 1245 800
l (mm) 290 350 420 550 700 850 950 1150 1100
Kg 36 47 60 170 290 400 535 920 950
NOTES : Inlet / Outlet langes are according to ANSI B16.5
POT STRAINER PSC300Size (inches) 2” 3” 4” 6” 8” 10”
h1 (mm) 110 140 160 180 240 315
h (mm) 205 265 350 500 650 850
l (mm) 309 350 420 550 725 850
Kg 38 49 65 178 299 415
NOTES : Inlet / Outlet langes are according to ANSI B16.5
POT STRAINER PSC600Size (inches) 14”
h1 (mm) 395
h (mm) 1245
l (mm) 1250
Kg 950
NOTES : Inlet / Outlet langes are according to ANSI B16.5
Our Temporary Conical Strainer section includes three different types of strainers.
In the following tabs you can visualize the table of the desired strainer.
“Conical Temporary”STRAINERS
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 68
Conical type temporary strainers are designed for the eficent
removal of solids in new pipeline startup services. They are
compact and rugged and can be installed either vertically
or horizontally. They can be manufactured using any kind of
wire mesh or perforated plate, in carbon and stainless steel or
customized alloys. Given dimensions are for reference purpose
only. It is possible to manufacture conical strainers in line with
any customer standard. Strainers are designed to be installed
between ANSI B16.5 langes and FF, RF and RTJ facings.
FT1
CONICAL STRAINERD-KTC
ASSEMBLY INSTRUCTIONS
Insert the strainer between the two langes ( 4 )Make sure the two gasket are itted on both sidesTighten bolts ( 3 ) keeping the strainer ( 1 ) + gaskets ( 2 ) in the correct position
MAINTENANCE INSTRUCTIONS
Unscrew bolts ( 3 )Remove the strainer ( 1 ) and clean or replace itWhen re-assembling use new gaskets
Strainers may be manufactured to any customerʼs standard.
Strainers may be manufactured to any customerʼs standard.
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 69
HOW TO ORDER:
i.e. FT1 4” 150# A240 TP304 - PERF. HOLS 3 mm DIAi.e. FT2 4” 150# A240 TP304 - PERF. HOLS 3 mm DIAi.e. FT3 4” 150# A240 TP304 - 3 MESH FILTRATION
POS. DESCRIPTION MATERIALS SPARES
1 Ring SS 304
2 Perforated plate ASTM A240 304
OTHER MATERIALS ON REQUEST
Size (inches) 1½” 2” 3” 4” 6” 8” 10” 12" 14” 16” 18” 20” 24”
D 73 92 127 157 216 270 324 81 412 470 534 584 692
H 60 80 120 150 230 300 350 400 450 500 550 600 650
L 70 70 70 80 100 100 110 110 120 130 130 140 150
C 20 20 20 20 20 20 20 20 20 20 20 20 20
S 3 3 3 3 5 5 5 5 5 7 7 7 7
A 33 48 75 100 150 200 250 300 332 383 434 485 587
B 20 26 44 60 89 118 149 175 194 224 250 285 300
Dimension : D, H, L, C, S , A, B are in millimeters ( mm)OTHER SIZES ON REQUEST
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 70
Strainers may be manufactured to any customerʼs standard.
Conical type temporary strainers are designed for the eficent
removal of solids in new pipeline startup services. They are
compact and rugged and can be installed either vertically
or horizontally. They can be manufactured using any kind of
wire mesh or perforated plate, in carbon and stainless steel
or exotic alloys. Given dimensions are for reference purpose
only. It is possible to manufacture conical strainers in line with
any customer standard. Strainers are designed to be installed
between ANSI B16.5 langes and meet FF, RF and RTJ facings.
FT2
CONICAL STRAINERD-KTC
ASSEMBLY INSTRUCTIONS
Insert the strainer between the two langes ( 4 )Make sure the two gasket are itted on both sidesTighten bolts ( 3 ) keeping the strainer ( 1 ) + gaskets ( 2 ) in the correct position
MAINTENANCE INSTRUCTIONS
Unscrew bolts ( 3 )Remove the strainer ( 1 ) and clean or replace itWhen re-assembling use new gaskets
Strainers may be manufactured to any customerʼs standard.
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 71
HOW TO ORDER:
i.e. FT2 4” 150# A240 TP304 - PERF. HOLS 3 mm DIA
POS. DESCRIPTION MATERIALS SPARES
1 Ring SS 304
2 Perforated plate ASTM A240 304
OTHER MATERIALS ON REQUEST
Size (inches) 1½” 2” 3” 4” 6” 8” 10” 12" 14” 16” 18” 20” 24”
D 73 92 127 157 216 270 324 81 412 470 534 584 692
H 60 80 120 150 230 300 350 400 450 500 550 600 650
L 70 70 70 80 100 100 110 110 120 130 130 140 150
C 20 20 20 20 20 20 20 20 20 20 20 20 20
S 3 3 3 3 5 5 5 5 5 7 7 7 7
A 33 48 75 100 150 200 250 300 332 383 434 485 587
B 20 26 44 60 89 118 149 175 194 224 250 285 300
Dimension : D, H, L, C, S, A, B are in millimeters ( mm)OTHER SIZES ON REQUEST
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 72
Strainers may be manufactured to any customerʼs standard.
Conical type temporary strainers are designed for the eficent
removal of solids in new pipeline startup services. They are
compact and rugged and can be installed either vertically
or horizontally. They can be manufactured using any kind of
wire mesh or perforated plate, in carbon and stainless steel
or exotic alloys. Given dimensions are for reference purpose
only. It is possible to manufacture conical strainers in line with
any customer standard. Strainers are designed to be installed
between ANSI B16.5 langes and meet FF, RF and RTJ facings.
FT3
CONICAL STRAINERD-KTC
ASSEMBLY INSTRUCTIONS
Insert the strainer between the two langes ( 4 )Make sure the two gasket are itted on both sidesTighten bolts ( 3 ) keeping the strainer ( 1 ) + gaskets ( 2 ) in the correct position
MAINTENANCE INSTRUCTIONS
Unscrew bolts ( 3 )Remove the strainer ( 1 ) and clean or replace itWhen re-assembling use new gaskets
Strainers may be manufactured to any customerʼs standard.
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 73
HOW TO ORDER:
i.e. FT3 4” 150# A240 TP304 - 3 MESH FILTRATION
POS. DESCRIPTION MATERIALS SPARES
1 Ring SS 304
2 Wire mesh SS 304
3 Rods SS 304
OTHER MATERIALS ON REQUEST
Size (inches) 1½” 2” 3” 4” 6” 8” 10” 12" 14” 16” 18” 20” 24”
D 73 92 127 157 216 270 324 81 412 470 534 584 692
H 60 80 120 150 230 300 350 400 450 500 550 600 650
L 70 70 70 80 100 100 110 110 120 130 130 140 150
C 20 20 20 20 20 20 20 20 20 20 20 20 20
S 3 3 3 3 5 5 5 5 5 7 7 7 7
A 33 48 75 100 150 200 250 300 332 383 434 485 587
B 20 26 44 60 89 118 149 175 194 224 250 285 300
Dimension : D, H, L, C, S, A, B are in millimeters ( mm)OTHER SIZES ON REQUEST
Our Forged Flow Indicator section includes three different types of valve.
In the following tabs you can visualize the table of the desired valve.
“Flow” INDICATORS
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 76
300 A105/300 F316/SF 300
FORGED STEEL FLOW INDICATORSD-KTC
INDICATOR TYPE - Pos. 7
TYPE- A -
NO INDICATOR
TYPE- B -
FIXED FLAPPERS
TYPE- C -
CHAIN
TYPE- D -
FLOATING BALL
TYPE- E -
SPINNER
TYPE- F -
PIPE
CONNECTIONS
crewed ANSI B1.20.1 NPT - BS21 BSP
Socket weld ANSI B16.11
Flanged ANSI B16.5 150#/300#/ UNI / DIN / PN 16/25/40
LIMITING CONDITIONS
Acc. to the body rating ANSI 300 ( B 16.34 )
GLASS CONDITION TEMPERED
DN ½” – ¾” 1” 1½”
Norm. work temp. 130°C 130°C 130°C
Max. work temp. (for 300 h ) 150°C 150°C 150°C
Termic shock 120°C 120°C 120°C
Max. pressure ( bar ) 50 50 24
GLASS CONDITION BOROSILICATE
DN ½” – ¾” 1” 1½”
Norm. work temp. 280°C 280°C 280°C
Max. work temp. (for 300 h ) 300°C 300°C 300°C
Termic shock 265°C 265°C 265°C
Max. pressure ( bar ) 50 50 24
Size S H D C Weight (Kg) (SF) ANSIUNI-DIN
½” 90 84 40 12 1.3 130
¾” 90 84 40 12 1.3 150
1” 110 94 50 12 2.3 160
1½” 127 114 70 12 3.5 200
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 77
MAINTENANCE:
Maintenance of low indicators should be made whenever the visibility through the window is poor. Follow the points here below:Make sure that the main line is shutoff. Loosen bolts (5) and remove covers (2), glasses (3) and the four gaskets. Clean the inside of the body to remove any dirt. Clean the two glasses with a soft cloth using if necessary a suitable cleaning luid. If glasses are damaged or cracked, replace them. Reassemble all the elements replacing the four gaskets. Slowly give pressure to the line checking for leaks.
CLASS SF 300
POS. DESCRIPTION MATERIALS SPARES
1 Body ASTM A105 ASTM A182 F316
2 Flange ASTM A105 ASTM A182 F316
3 Glass TEMPERED TEMPERED X
4 Gasket CAF CAF X
5 Bolt ASTM A193 B7 ASTM A193 B8
6 Flange ASTM A105 ASTM A182 F316
7 Flange WN ASTM A105 ASTM A182 F316
Indicator See type(3) Borosilicate acc. to DIN7080 , on request (4) C.A.F. : Compressed Aramidic Fibre
CLASS 300 A105
POS. DESCRIPTION MATERIALS SPARES
1 Body ASTM A105
2 Flange ASTM A105
3 Glass TEMPERED X
4 Gasket CAF X
5 Stud Bolts ASTM A193 B7
6 Nuts ASTM A194 2H
7 Flange ASTM A105
(3) Borosilicate acc. to DIN7080 (4) C.A.F.: Compressed Aramidic Fibre
CLASS 300 F316
POS. DESCRIPTION MATERIALS SPARES
1 Body ASTM A182 F316
2 Flange ASTM A182 F316
3 Glass TEMPERED X
4 Gasket CAF X
5 Stud Bolts ASTM A320 L7
6 Nuts ASTM A194 Gr.4
7 Flange ASTM A182 F316
(3) Borosilicate acc. to DIN7080 , on request (4) C.A.F. : Compressed Aramidic Fibre
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 78
SC 150
CAST STEEL FLOW INDICATORSD-KTC
CONNECTIONS
Flanged ANSI B16.5
150#/300# / UNI / DIN / PN 16/25/40
INDICATOR TYPE - Pos. 7
TYPE- A -
NO INDICATOR
TYPE- B -
FIXED FLAPPERS
TYPE- C -
CHAIN
TYPE- D -
FLOATING BALL
TYPE- E -
SPINNER
TYPE- F -
PIPE
LIMITING CONDITIONS
TEMPERED GLASS acc. to DIN 7080
SIZE BODY RATING2”
3003”
3004”
3006”
3008”
300
Temp (°C) Max working pressure (bar)
-40 / +37 50 25 25 11 7
93 46 25 25 11 7
150 45 25 25 11 7
BOROSILICATE GLASS acc. to DIN 7080
SIZE BODY RATING2”
3003”
3004”
3006”
3008”
300
Temp (°C) Max working pressure (bar)
-40 / +37 50 25 25 11 7
93 46 25 25 11 7
150 45 25 25 11 7
204 43 25 25 11 7
280 40 25 25 11 7
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 79
MAINTENANCE:
Maintenance of low indicators should be made whenever the visibility through the window is poor. Follow the points here below:Make sure that the main line is shutoff. Loosen bolts (5) and remove covers (2), glasses (3) and the four gaskets. Clean the inside of the body to remove any dirt. Clean the two glasses with a soft cloth using if necessary a suitable cleaning luid. If glasses are damaged or cracked, replace them. Reassemble all the elements replacing the four gaskets. Slowly give pressure to the line checking for leaks.
Size (inches) 2” 3” 4” 6” 8”
D 80 110 135 200 250
C 15 20 25 25 25
Weight (Kg) 10.5 20 26.5 68 125
(SF) ANSI-UNI-DIN 230 310 350 480 600
POS. DESCRIPTION MATERIALS SPARES
1 Body ASTM A216 WCB ASTM A351 CF8M
2 Flange ASTM A216 WCB ASTM A351 CF8M
3 Glass TEMPERED TEMPERED X
4 Gasket CAF CAF X
5 Stud Bolts ASTM A193 B7 ASTM A193 B8
6 Nuts ASTM A194 2H ASTM A194 Gr.8
7IndicatorSee type
ON REQUEST ON REQUEST
(3) Borosilicate acc. to DIN7080 , on request(4) C.A.F. : Compressed Aramidic Fibre
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 80
SC 300
CAST STEEL FLOW INDICATORSD-KTC
CONNECTIONS
Flanged ANSI B16.5
150#/300# / UNI / DIN / PN 16/25/40
INDICATOR TYPE - Pos. 7
TYPE- A -
NO INDICATOR
TYPE- B -
FIXED FLAPPERS
TYPE- C -
CHAIN
TYPE- D -
FLOATING BALL
TYPE- E -
SPINNER
TYPE- F -
PIPE
LIMITING CONDITIONS
TEMPERED GLASS acc. to DIN 7080
SIZE BODY RATING2”
3003”
3004”
3006”
3008”
300
Temp (°C) Max working pressure (bar)
-40 / +37 50 25 25 11 7
93 46 25 25 11 7
150 45 25 25 11 7
BOROSILICATE GLASS acc. to DIN 7080
SIZE BODY RATING2”
3003”
3004”
3006”
3008”
300
Temp (°C) Max working pressure (bar)
-40 / +37 50 25 25 11 7
93 46 25 25 11 7
150 45 25 25 11 7
204 43 25 25 11 7
280 40 25 25 11 7
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 81
POS. DESCRIPTION MATERIALS SPARES
1 Body ASTM A216 WCB ASTM A351 CF3M
2 Flange ASTM A105 ASTM A182 F316L
3 Glass ON REQUEST ON REQUEST X
4 Gasket CAF CAF X
5 Bolt ASTM A193 B7 ASTM A193 B8
6 Nuts ASTM A194 2H ASTM A194 Gr.8
7IndicatorSee type
BY CUSTOMER BY CUSTOMER
(3) Borosilicate acc. to DIN7080 , on request(4) C.A.F. : Compressed Aramidic Fibre
MAINTENANCE:
Maintenance of low indicators should be made whenever the visibility through the window is poor. Follow the points here below:Make sure that the main line is shutoff. Loosen bolts (5) and remove covers (2), glasses (3) and the four gaskets. Clean the inside of the body to remove any dirt. Clean the two glasses with a soft cloth using if necessary a suitable cleaning luid. If glasses are damaged or cracked, replace them. Reassemble all the elements replacing the four gaskets. Slowly give pressure to the line checking for leaks.
Size (inches) 2” 3” 4” 6” 8”
D 80 110 135 200 250
C 20 20 25 25 25
Weight (Kg) 230 310 350 480 600
(SF) ANSI-UNI-DIN 10.5 20 26.5 68 125
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 82
S150 CF3M
CAST STEEL FLOW INDICATORSD-KTC
CONNECTIONS
Flanged ANSI B16.5
150#/300# / UNI / DIN / PN 16/25/40
INDICATOR TYPE - Pos. 7
TYPE- A -
NO INDICATOR
TYPE- B -
FIXED FLAPPERS
TYPE- C -
CHAIN
TYPE- D -
FLOATING BALL
TYPE- E -
SPINNER
TYPE- F -
PIPE
LIMITING CONDITIONS
Acc. to the body rating DIN PN 25 up to 4” – DIN PN16 for 6”- 8”GLASS CONDITION
MAX. WORK TEMPERATURE
Tempered glass 180°C
Borosilicate glass 300°C
150 45
204 43
280 40
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 83
POS. DESCRIPTION MATERIALS SPARES
1 Body ASTM A351 CF3M
2 Flange ASTM A182 F316L
3 Glass BOROSILICATE X
4 Gasket GRAPHITE X
5 Stud Bolts ASTM A193 B8
6 Nuts ASTM A194 GR.8
(3) Borosilicate acc. to DIN7080 , on request(4) C.A.F. : Compressed Aramidic Fibre
MAINTENANCE:
Maintenance of low indicators should be made whenever the visibility through the window is poor. Follow the points here below:Make sure that the main line is shutoff. Loosen bolts (5) and remove covers (2), glasses (3) and the four gaskets. Clean the inside of the body to remove any dirt. Clean the two glasses with a soft cloth using if necessary a suitable cleaning luid. If glasses are damaged or cracked, replace them. Reassemble all the elements replacing the four gaskets. Slowly give pressure to the line checking for leaks.
Size (inches) 2” 3” 4” 6” 8”
D 80 110 135 200 250
C 15 20 25 25 25
Weight (Kg) 10.5 20 26.5 68 125
(SF) ANSI-UNI-DIN 230 310 350 480 600
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 84
S150 CF8M
CAST STEEL FLOW INDICATORSD-KTC
CONNECTIONS
Flanged ANSI B16.5
150#/300# / UNI / DIN / PN 16/25/40
INDICATOR TYPE - Pos. 7
TYPE- A -
NO INDICATOR
TYPE- B -
FIXED FLAPPERS
TYPE- C -
CHAIN
TYPE- D -
FLOATING BALL
TYPE- E -
SPINNER
TYPE- F -
PIPE
LIMITING CONDITIONS
Acc. to the body rating DIN PN 25 up to 4” – DIN PN16 for 6”- 8”GLASS CONDITION
MAX. WORK TEMPERATURE
Tempered glass 180°C
Borosilicate glass 300°C
150 45
204 43
280 40
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 85
MAINTENANCE:
Maintenance of low indicators should be made whenever the visibility through the window is poor. Follow the points here below:Make sure that the main line is shutoff. Loosen bolts (5) and remove covers (2), glasses (3) and the four gaskets. Clean the inside of the body to remove any dirt. Clean the two glasses with a soft cloth using if necessary a suitable cleaning luid. If glasses are damaged or cracked, replace them. Reassemble all the elements replacing the four gaskets. Slowly give pressure to the line checking for leaks.
Size (inches) 2” 3” 4” 6” 8”
D 80 110 135 200 250
C 15 20 25 25 25
Weight (Kg) 10.5 20 26.5 68 125
(SF) ANSI-UNI-DIN 230 310 350 480 600
POS. DESCRIPTION MATERIALS SPARES
1 Body ASTM A351 CF8M
2 Flange ASTM A351 CF8M
3 Glass TEMPERED X
4 Gasket CAF X
5 Stud Bolts ASTM A193 B8
6 Nuts ASTM A194 Gr.8
(3) Borosilicate acc. to DIN7080 , on request(4) C.A.F. : Compressed Aramidic Fibre
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 86
S150 WCB
CAST STEEL FLOW INDICATORSD-KTC
CONNECTIONS
Flanged ANSI B16.5
150#/300# / UNI / DIN / PN 16/25/40
INDICATOR TYPE - Pos. 7
TYPE- A -
NO INDICATOR
TYPE- B -
FIXED FLAPPERS
TYPE- C -
CHAIN
TYPE- D -
FLOATING BALL
TYPE- E -
SPINNER
TYPE- F -
PIPE
LIMITING CONDITIONS
Acc. to the body rating DIN PN 25 up to 4” – DIN PN16 for 6”- 8”GLASS CONDITION
MAX. WORK TEMPERATURE
Tempered glass 180°C
Borosilicate glass 300°C
150 45
204 43
280 40
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 87
MAINTENANCE:
Maintenance of low indicators should be made whenever the visibility through the window is poor. Follow the points here below:Make sure that the main line is shutoff. Loosen bolts (5) and remove covers (2), glasses (3) and the four gaskets. Clean the inside of the body to remove any dirt. Clean the two glasses with a soft cloth using if necessary a suitable cleaning luid. If glasses are damaged or cracked, replace them. Reassemble all the elements replacing the four gaskets. Slowly give pressure to the line checking for leaks.
Size (inches) 2” 3” 4” 6” 8”
D 80 110 135 200 250
C 15 20 25 25 25
Weight (Kg) 10.5 20 26.5 68 125
(SF) ANSI-UNI-DIN 230 310 350 480 600
POS. DESCRIPTION MATERIALS SPARES
1 Body ASTM A351 CF8M
2 Flange ASTM A351 CF8M
3 Glass TEMPERED X
4 Gasket CAF X
5 Stud Bolts ASTM A193 B8
6 Nuts ASTM A194 Gr.8
(3) Borosilicate acc. to DIN7080 , on request(4) C.A.F. : Compressed Aramidic Fibre
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 88
S300 WCB
CAST STEEL FLOW INDICATORSD-KTC
CONNECTIONS
Flanged ANSI B16.5
150#/300# / UNI / DIN / PN 16/25/40
INDICATOR TYPE - Pos. 7
TYPE- A -
NO INDICATOR
TYPE- B -
FIXED FLAPPERS
TYPE- C -
CHAIN
TYPE- D -
FLOATING BALL
TYPE- E -
SPINNER
TYPE- F -
PIPE
LIMITING CONDITIONS
TEMPERED GLASS acc. to DIN 7080
SIZE BODY RATING2”
3003”
3004”
3006”
3008”
300
Temp (°C) Max working pressure (bar)
-40 / +37 50 25 25 11 7
93 46 25 25 11 7
150 45 25 25 11 7
BOROSILICATE GLASS acc. to DIN 7080
SIZE BODY RATING2”
3003”
3004”
3006”
3008”
300
Temp (°C) Max working pressure (bar)
-40 / +37 50 25 25 11 7
93 46 25 25 11 7
150 45 25 25 11 7
204 43 25 25 11 7
280 40 25 25 11 7
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 89
MAINTENANCE:
Maintenance of low indicators should be made whenever the visibility through the window is poor. Follow the points here below:Make sure that the main line is shutoff. Loosen bolts (5) and remove covers (2), glasses (3) and the four gaskets. Clean the inside of the body to remove any dirt. Clean the two glasses with a soft cloth using if necessary a suitable cleaning luid. If glasses are damaged or cracked, replace them. Reassemble all the elements replacing the four gaskets. Slowly give pressure to the line checking for leaks.
POS. DESCRIPTION MATERIALS SPARES
1 Body ASTM A216 WCB
2 Flange ASTM A216
3 Glass BOROSILICATE X
4 Gasket CAF X
5 Bolt ASTM A193 B7
6 Indicator -
(3) Borosilicate acc. to DIN7080 , on request(4) C.A.F. : Compressed Aramidic Fibre
Size (inches) 2” 3” 4” 6” 8”
D 80 110 135 200 250
C 20 20 25 25 25
Weight (Kg) 230 310 350 480 600
(SF) ANSI-UNI-DIN 10.5 20 26.5 68 125
FLAME ARRESTOR
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 92
During the tank iling, the breathing valve expel over the tank
some gas that could burn. The tank has to be protected to
avoid that the lames spread inside the tank. This is the reason
why a lame stopper is installed between the tank and the
breathing valve and it has to:
- Defeat the lame
- Resist and make the hot fade away
- Resist to the shock wave producer by an external explosion.
The lame arrestor eficirncy is reduced by the lame arrestot
element and by the ilth that is inside it.
FLAME ARRESTORD-KTC
TECHNICAL DATA
Design codes EN.16852, ASME VIII, IX
Design pressure 10 BarG
Design temperature-10/+250 °C for C.S.-120/+250 for S.S.
InstallationIn-line delagration,
vertical, bidirectional, max distance from ire source DNx50
Max operating temperature 60 °C
MESG IIA
Atex certiicated EX G-IIA
Ped certiicated CE1370
Factory tested Dimensional, hydrotest at 19.38 BarG
sizes From 1” to 12”
Connections Flanged ANSI 150# RF
External protection 00-GA-E-60701
This document is property of D-KTC S.r.l. - Sales Office: Via Pacini, 93 - 20131 - Milano, Italy - 02/70608573 - [email protected]
Factory: Loc.Pradaglie - 29013 Carpaneto P.no (PC) - Tel. 0523 853038/859997 93
POS. DESCRIPTION MATERIALS
1 Body C.S SS304L SS316L C.S.
2 Housing SS316L SS304L SS316L C.S.
3 Elements SS316L SS316L SS316L SS316L
4 Gaskets A.F.F. SS/PTFE S.S./PTFE A.F.F.
5 Bolts B7/2H B8-8 B8M-8M B7/2H
6 Label SS304 SS304 SS304 SS304
Product codes with ANSI langes 422.2.xx.101 422.2.xx.103 422.2.xx.105 422.2.xx.109
Size (mm) A B H Weight (KG)
1” 200 200 250 15
2” 230 230 333 27
3” 280 280 422 43
4” 345 345 440 80
5” 407 407 500 100
6” 483 483 580 135
8” 597 597 897 220
10” 699 699 1211 250
12” 813 813 1233 360
Product code With Ansi langs 422.2.08.103
Neoprene® Viton® Telon® Kalrez® are DuPont’sTM trademarks. DuPont is a trademark of DuPont and its afiliates
D-KTC FLUID CONTROL S.r.l.