product catalogue chemseal diaphragm seals · 2019. 4. 17. · 4. chemseal diaphragm seal . type...
TRANSCRIPT
Product Catalogue
CHEMSEAL®
Diaphragm Seals
2
www.pinter-gmbh.com
www.pinter-gmbh.com
3
CONTENT
CHEMSEAL® Diaphragm Seal with threaded connection ................................................................................4 - 9 CHEMSEAL®TypeET(threadconnection,flushmembrane) ............................................................... 4 CHEMSEAL®TypeUT(threadconnection,welded) ............................................................................. 6 CHEMSEAL®TypeST(threadconnection,threaded) .......................................................................... 8 CHEMSEAL® Diaphragm Seal with flange connection ................................................................................10 - 17 CHEMSEAL®TypeFT(flangeaccordingtoDINEN1092-1FormB2) ...............................................10 CHEMSEAL®TypeFT(flangeaccordingtoASMEB16.5RF) ............................................................12 CHEMSEAL®TypeWT(cell-type,flangeaccordingtoDINEN1092-1FormB2) ..............................14 CHEMSEAL®TypeWT(cell-type,flangeaccordingtoASMEB16.5RF) ...........................................16
CHEMSEAL® Diaphragm Seal for food stuff, bio technology, pharmacy ...................................................18 - 25 CHEMSEAL®TypeMT(diaphragmsealaccordingtoDIN11851) .....................................................18 CHEMSEAL®TypeMT(diaphragmsealaccordingtoIDFISO2853) ................................................20 CHEMSEAL®TypeMT(diaphragmsealaccordingtoSMSnorm) .....................................................21 CHEMSEAL®TypeCT(diaphragmsealaccordingtoISO2852) .......................................................22 CHEMSEAL®TypeVT(diaphragmsealforVARIVENT®in-linehousing) ..........................................24
CHEMSEAL® Diaphragm Seal application specific ......................................................................................26 - 27 CHEMSEAL®TypePT(diaphragmsealforpaperandpulpindustry) .................................................26
CONVERSION TABLE FOR PRESSURE UNITS .................................................................................................... 28INQUIRY CHECKLISTE FOR DIAPHRAGM SEALS ............................................................................................... 29FURTHER PRODUCTS FROM PINTER .................................................................................................................. 30IMPRINT ....................................................................................................................................................................31
4
www.pinter-gmbh.com
CHEMSEAL Diaphragm Seal Type ET
DescriptionDiaphragmsealwiththreadconnection
Anwendung• forgeneralappliactions
• forpressureswitches,pressuretransmiters orpressuregauges.
• forhot,pollutedoraggressivemedia
• especiallyforhighpressure
DIMENSIONAL DRAWING
Body/Weldingconnection
G d h H a b SW
1/2“BSPmale 26 17 33,5 3 3 27
3/4“BSPmale 32 19 34 3 3 32
1“BSPmale 39 21 36 3 3 41
11/2“BSPmale 55 25 48 3 3 55
2“BSPmale 68 27 56 3 3,5 70
Technical Data Standard OptionsType Diaphragmsealwiththreadconnection;
Materialbody Stainlesssteel1.4571(AISI316Ti) onrequest
Materialdiaphragm Stainlesssteel1.4571(AISI316Ti) onrequest
Diaphragmcoating onrequest
Instrumentconnection 1/2“BSPfemale 1/4“BSPfemale;weldingconnection
Processconnection seedimensionaldrawings
Nominalpressure PN600-PN1000
Fillingfluid Multipurposeoil(-20°C-+200°C) NT-/HT-oil;Halocarbon
Further optionsCapillary
Coolingelement
www.pinter-gmbh.com
5
ORDER CODES (mostcommonoptions)
order code CS 02 x x - x - x x x x x
MaterialsBody/Diaphragm1.4571(316Ti) 2Body/Diaphragm1.4404(316L) 5Body1.4571(316Ti)/DiaphragmTantalum A
Mounting
direct Acapillary1m Bcapillary2m Ccapillary3m Dcapillary4m Ecapillary5m Fcapillary10m K
NominalpressurePN40 002PN400 047
Instrumentconnection
1/4“BSPfemale 41/2“BSPfemale Kweldingconnection S
Processconnection1/2“BSPmale D3/4“BSPmale I
Fillfluid
without OMultipurposeoil ALowtemperatureoil CHightemperatureoil DHalocarbon E
Diaphragmcoatingwithout OPTFE APFA B
Furtheroptionsnofurtheroptions Ofurtheroptionsintext #
MOUNTING OPTIONS
InstrumentConnection,threaded InstrumentConnection,threaded,withcoolingelement
InstrumentConnection,threaded,with capillary
6
www.pinter-gmbh.com
CHEMSEAL Diaphragm Seal Type UT
DIMENSIONAL DRAWINGS
Body/WeldingConnection
DescriptionDiaphragmSealwiththreadconnectionincom-pletelyweldedversion
Application• forgeneralapplications,mechanicalengineering
aswellaschemicalandpetrochemicalindustry
• forpressureswitches,pressuregaugesand pressuretransmitters
• forhot,pollutedoraggressivemedia
Technical Data Standard Options
Type Diaphragmsealwiththreadconnection;diaphragminsidebody,welded
Materialbody Stainlesssteel1.4571(AISI316Ti) onrequest
Materialdiaphragm Stainlesssteel1.4571(AISI316Ti) onrequest
Instrumentconnection 1/2“BSPfemale 1/4“BSPfemale;weldingconnection
Processconnection seedimensionaldrawings
Nominalpressure PN40;PN400
Fillingfluid Multipurposeoil(-20°C-+200°C) LT-/HT-oil;Halocarbon
Further OptionsCapillary
Coolingelement
PN G ∅A ∅D h H SW
40 1/4“BSPmale 55 6 13 44,5 14
40 1/2“BSPmale 55 10 20 51,5 14
400 1/4“BSPmale 40 6 13 44,5 22
400 1/2“BSPmale 40 10 20 51,5 22
www.pinter-gmbh.com
7
ORDER CODES (mostcommonoptions)
order code CS 03 x x - x - x x x x x
MaterialsBody/Diaphragm1.4571(316Ti) 2Body/Diaphragm1.4404(316L) 5Body1.4571(316Ti)/DiaphragmTantalum A
Mounting
direct Acapillary1m Bcapillary2m Ccapillary3m Dcapillary4m Ecapillary5m Fcapillary10m K
NominalpressurePN40 002PN400 047
Instrumentconnection
1/4“BSPfemale 41/2“BSPfemale Kweldingconnection S
Processconnection
1/2“BSPmale D3/4“BSPmale I1/2“BSPmale(bore10mm) HM20x1,5(bore13mm) A
Fillfluid
without OMultipurposeoil ALowtemperatureoil CHightemperatureoil DHalocarbon E
Diaphragmcoatingwithout OPTFE APFA B
Furtheroptionsnofurtheroptions Ofurtheroptionsintext #
MOUNTING OPTIONS
InstrumentConnection,threaded InstrumentConnection,threaded,withcoolingelement
InstrumentConnection,threaded,with capillary
8
www.pinter-gmbh.com
CHEMSEAL Diapragm Seal Type ST
DIMENSIONAL DRAWING
Body/Weldingconnection
DescriptionDiaphragmSealwiththreadconnection.Threadedversion,disassemblable
Application• forgeneralapplications,mechanicalengineering
aswellaschemicalandpetrochemicalindustry
• forpressureswitches,pressuregaugesand pressuretransmitters
• forhot,pollutedoraggressivemedia
Technical Data Standard Options
Type Diaphragmsealinthreadedversionwiththreadconnection;diaphragminsidebody,welded
Materialbody Stainlesssteel1.4571(AISI316Ti) onrequest
Materialdiaphragm Stainlesssteel1.4571(AISI316Ti) onrequest
Materialseal FKM onrequest
Instrumentconnection seedimensionaldrawings
Processconnection seedimensionaldrawings
Nominalpressure PN25;PN250
Fillingfluid Multipurposeoil(-20°C-+200°C) LT-/HT-oil
Further optionsCapillary
Coolingelement
PN G G1 d1/d2 D H n SW
25 1/2“BSPfemale
1/2“BSPfemale 30 95 56 4xM10 27
25 1/2“BSPmale
1/2“BSPfemale 30 95 79 4xM10 27
25 1/2“NPTmale
1/2“BSPfemale 30 95 76 4xM10 27
250 1/2“BSPfemale
1/2“BSPfemale 30 95 56 8xM10 27
250 1/2“BSPmale
1/2“BSPfemale 30 95 79 8xM20 27
250 1/2“NPTmale
1/2“BSPfemale 30 95 76 8xM10 27
www.pinter-gmbh.com
9
ORDER CODES (mostcommonoptions)
order code CS 04 x x - x - x x x x x
MaterialsBody/Diaphragm1.4571(316Ti) 2Body/Diaphragm1.4404(316L) 5Body1.4571(316Ti)/DiaphragmTantalum A
Mounting
direct Acapillary1m Bcapillary2m Ccapillary3m Dcapillary4m Ecapillary5m Fcapillary10m K
NominalpressurePN25 009PN250 022
Instrumentconnection
1/2“BSPfemale Kweldingconnection S
Processconnection1/2“BSPfemale K1/2“BSPmale D1/2“NPTmale V
Fillfluid
without OMultipurposeoil ALowtemperatureoil CHightemperatureoil D
Diaphragmcoatingwithout OPTFE APFA B
Furtheroptionsnofurtheroptions Ofurtheroptionsintext #
MOUNTING OPTIONS
InstrumentConnection,threaded InstrumentConnection,threaded,withcoolingelement
InstrumentConnection,threaded,with capillary
10
www.pinter-gmbh.com
CHEMSEAL Diaphragm Seal Type FT (DIN EN 1092-1 Form B2)
Technical Data Standard Options
Type Diaphragmsealwithflangeconnection;frontfacingdiaphragm
Materialbody Stainlesssteel1.4571(AISI316Ti) onrequest
Materialdiaphragm Stainlesssteel1.4571(AISI316Ti) onrequest
Diaphragmcoating PTFE,PFA,ECTFE,Gold,Silver
Instrumentconnection 1/2“BSPfemale 1/4“BSPfemale;weldingconnection
Processconnection seedimensionaldrawings
Nominalpressure seetable
Fillingfluid Multipurposeoil(-20°C-+200°C) NT-/HT-oil;Halocarbon:NU52
Further optionsCapillary
Coolingelement
DIMENSIONAL DRAWING
Body/Weldingconnection
DescriptionDiaphragmsealwithflangeconnection
Application• forgeneralapplicationsaswellasthe chemicalandpetrochemicalindustryand powerplanttechnology
• forpressureswitches,pressuregaugesand pressuretransmitters
• forhot,pollutedoraggressivemedia
DN PN D d1 d2 d3 H h25 40 115 68 85 4x14 18 225 100 140 68 100 4x18 24 225 160 140 68 100 4x18 24 240 40 150 88 110 4x18 18 240 100 170 88 125 4x22 26 340 160 170 88 125 4x22 28 350 40 165 102 125 4x18 20 350 64 180 102 135 4x22 26 350 100 195 102 145 4x26 28 380 16 200 138 145 8x18 20 380 40 200 138 160 8x18 24 380 64 215 138 160 8x22 28 3100 16 220 158 180 8x18 20 3100 40 235 162 190 8x22 24 3100 64 250 162 200 8x26 30 3125 16 250 188 210 8x18 22 3125 40 270 188 220 8x26 26 3125 64 295 188 240 8x30 34 3
www.pinter-gmbh.com
11
ORDER CODES (mostcommonoptions)
order code CS 05 x x - x - x F x x x
MaterialsBody/Diaphragm1.4571(316Ti) 2Body/Diaphragm1.4404(316L) 5Body1.4571(316Ti)/DiaphragmTantalum A
Mounting
direct Acapillary1m Bcapillary2m Ccapillary3m Dcapillary4m Ecapillary5m Fcapillary10m K
Nominalpressure/Nominalsize
PN DN25 40 00425 100 01440 40 00640 100 05140 160 05250 40 00050 64 04550 100 05380 16 01280 40 003100 16 055100 40 056125 16 050125 64 048
Instrumentconnection
1/2“BSPfemale K1/2“NPTfemale 1M20x1,5 Mweldingconnection S
Fillfluid
without OMultipurposeoil ALowtemperatureoil CHightemperatureoil DHalocarbon ENU52 G
Diaphragmcoatingwithout OPFA BGold C
Furtheroptionsnofurtheroptions Ofurtheroptionsintext #
MOUNTING OPTIONS
InstrumentConnection,threaded InstrumentConnection,threaded,withcoolingelement
InstrumentConnection,threaded,with capillary
12
www.pinter-gmbh.com
CHEMSEAL Diaphragm Seal Type FT (ASME B16.5 RF)
DIMENSIONAL DRAWING
Body/Weldingconnection
DescriptionDiaphragmsealwithflangeconnection
Application• forgeneralapplicationsaswellasthe chemicalandpetrochemicalindustryand powerplanttechnology
• forpressureswitches,pressuregaugesand pressuretransmitters
• forhot,pollutedoraggressivemedia
DN CL D d1 d2 d3 H h1“ 150 108 51 79 4x16 14 1,51“ 300 124 51 89 4x19 18 1,51“ 600 124 51 89 4x19 18 6,31,5“ 150 127 73 98 4x16 17 1,51,5“ 300 155 73 114 4x22 21 1,51,5“ 600 155 73 114 4x22 22 6,32“ 150 152 92 121 4x19 19 1,52“ 300 165 92 127 8x19 22 1,52“ 600 165 92 127 8x19 25 6,33“ 150 190 127 152 4x19 24 1,53“ 300 210 127 168 8x22 28 1,53“ 600 210 127 168 8x22 32 6,34“ 150 229 157 190 8x19 24 1,54“ 300 254 157 200 8x22 32 1,54“ 600 254 157 200 8x25 35 6,35“ 150 254 186 216 8x22 24 1,55“ 300 279 186 235 8x22 35 1,55“ 400 279 186 235 8x25 38 6,3
Technical Data Standard Options
Type Diaphragmsealwithflangeconnection;frontfacingdiaphragm
Materialbody Stainlesssteel1.4571(AISI316Ti) onrequest
Materialdiaphragm Stainlesssteel1.4571(AISI316Ti) onrequest
Diaphragmcoating PTFE,PFA,ECTFE,Gold,Silver
Instrumentconnection 1/2“BSPfemale 1/4“BSPfemale;weldingconnection
Processconnection seedimensionaldrawings
Nominalpressure seetable
Fillingfluid Multipurposeoil(-20°C-+200°C) NT-/HT-oil;Halocarbon:NU52
Further optionsCapillary
Coolingelement
www.pinter-gmbh.com
13
ORDER CODES (mostcommonoptions)
order code CS 06 x x - x - x F x x x
MaterialsBody/Diaphragm1.4571(316Ti) 2Body/Diaphragm1.4404(316L) 5Body1.4571(316Ti)/DiaphragmTantalum A
Mounting
direct Acapillary1m Bcapillary2m Ccapillary3m Dcapillary4m Ecapillary5m Fcapillary10m K
Nominalpressure/Nominalsize
DN CL1“ 150 0321“ 300 0051,5“ 150 0311,5“ 300 0351,5“ 600 0592“ 150 0362“ 300 0372“ 600 0603“ 150 0383“ 300 0394“ 150 0404“ 300 0415“ 150 0635“ 300 064
Instrumentconnection
1/2“BSPfemale K1/2“NPTfemale 1M20x1,5 Mweldingconnection S
Fillfluid
without OMultipurposeoil ALowtemperatureoil CHightemperatureoil DHalocarbon ENU52 G
Diaphragmcoatingwithout OPFA BGold C
Furtheroptionsnofurtheroptions Ofurtheroptionsintext #
MOUNTING OPTIONS
InstrumentConnection,threaded InstrumentConnection,threaded,withcoolingelement
InstrumentConnection,threaded,with capillary
14
www.pinter-gmbh.com
CHEMSEAL Diaphragm seal Type WT (DIN EN 1092-1)
Technical Data Standard Options
Type Diaphragmsealcell-typewithflangeconnection;frontfacingdiaphragm
Materialbody Stainlesssteel1.4571(AISI316Ti) onrequest
Materialdiaphragm Stainlesssteel1.4571(AISI316Ti) onrequest
Diaphragmcoating PTFE,PFA,ECTFE,Gold,Silver
Instrumentconnection 1/2“BSPfemale 1/4“BSPfemale;weldingconnection
Processconnection seedimensionaldrawings
Nominalpressure seetable
Fillingfluid Multipurposeoil(-20°C-+200°C) NT-/HT-oil;Halocarbon:NU52
DIMENSIONAL DRAWING
Body
DescriptionDiaphragmsealcell-typewithflangeconnection
Application• forgeneralapplicationsaswellasthe chemicalandpetrochemicalindustryand powerplanttechnology
• forpressureswitches,pressuregaugesand pressuretransmitters
• forhot,pollutedoraggressivemedia
DN PN D d1 H h25 40 115 68 18 225 100 140 68 24 225 160 140 68 24 240 40 150 88 18 240 100 170 88 26 340 160 170 88 28 350 40 165 102 20 350 64 180 102 26 350 100 195 102 28 380 16 200 138 20 380 40 200 138 24 380 64 215 138 28 3100 16 220 158 20 3100 40 235 162 24 3100 64 250 162 30 3125 16 250 188 22 3125 40 270 188 26 3125 64 295 188 34 3
www.pinter-gmbh.com
15
ORDER CODES (mostcommonoptions)
order code CS 07 x x - x - x F x x x
MaterialsBody/Diaphragm1.4571(316Ti) 2Body/Diaphragm1.4404(316L) 5Body1.4571(316Ti)/DiaphragmTantalum A
Mounting
capillary1m Bcapillary2m Ccapillary3m Dcapillary4m Ecapillary5m Fcapillary10m K
Nominalpressure/Nominalsize
PN DN25 40 00425 100 01440 40 00640 100 05140 160 05250 40 00050 64 04550 100 05380 16 01280 40 003100 16 055100 40 056125 16 050125 64 048
Instrumentconnection
1/2“BSPfemale K1/2“NPTfemale 1M20x1,5 Mweldingconnection S
Fillfluid
without OMultipurposeoil ALowtemperatureoil CHightemperatureoil DHalocarbon ENU52 G
Diaphragmcoatingwithout OPFA BGold C
Furtheroptionsnofurtheroptions Ofurtheroptionsintext #
MOUNTING OPTIONS
InstrumentConnection,threaded,with capillary
16
www.pinter-gmbh.com
CHEMSEAL Diaphragm seal Type WT (ASME B16.5 RF)
Technical Data Standard Options
Type Diaphragmsealcell-typewithflangeconnection;frontfacingdiaphragm
Materialbody Stainlesssteel1.4571(AISI316Ti) onrequest
Materialdiaphragm Stainlesssteel1.4571(AISI316Ti) onrequest
Diaphragmcoating PTFE,PFA,ECTFE,Gold,Silver
Instrumentconnection 1/2“BSPfemale 1/4“BSPfemale;weldingconnection
Processconnection seedimensionaldrawings
Nominalpressure seetable
Fillingfluid Multipurposeoil(-20°C-+200°C) NT-/HT-oil;Halocarbon:NU52
DIMENSIONAL DRAWING
Body
DescriptionDiaphragmsealcell-typewithflangeconnection
Application• forgeneralapplicationsaswellasthe chemicalandpetrochemicalindustryand powerplanttechnology
• forpressureswitches,pressuregaugesand pressuretransmitters
• forhot,pollutedoraggressivemedia
DN CL D d1 d2 d3 H h1“ 150 108 51 79 4x16 14 1,51“ 300 124 51 89 4x19 18 1,51“ 600 124 51 89 4x19 18 6,31,5“ 150 127 73 98 4x16 17 1,51,5“ 300 155 73 114 4x22 21 1,51,5“ 600 155 73 114 4x22 22 6,32“ 150 152 92 121 4x19 19 1,52“ 300 165 92 127 8x19 22 1,52“ 600 165 92 127 8x19 25 6,33“ 150 190 127 152 4x19 24 1,53“ 300 210 127 168 8x22 28 1,53“ 600 210 127 168 8x22 32 6,34“ 150 229 157 190 8x19 24 1,54“ 300 254 157 200 8x22 32 1,54“ 600 254 157 200 8x25 35 6,35“ 150 254 186 216 8x22 24 1,55“ 300 279 186 235 8x22 35 1,55“ 400 279 186 235 8x25 38 6,3
www.pinter-gmbh.com
17
ORDER CODES (mostcommonoptions)
order code CS 07 x x - x - x F x x x
MaterialsBody/Diaphragm1.4571(316Ti) 2Body/Diaphragm1.4404(316L) 5Body1.4571(316Ti)/DiaphragmTantalum A
Mounting
capillary1m Bcapillary2m Ccapillary3m Dcapillary4m Ecapillary5m Fcapillary10m K
Nominalpressure/Nominalsize
DN CL1“ 150 0321“ 300 0051,5“ 150 0311,5“ 300 0351,5“ 600 0592“ 150 0362“ 300 0372“ 600 0603“ 150 0383“ 300 0394“ 150 0404“ 300 0415“ 150 0635“ 300 064
Instrumentconnection
1/2“BSPfemale K1/2“NPTfemale 1M20x1,5 Mweldingconnection S
Fillfluid
without OMultipurposeoil ALowtemperatureoil CHightemperatureoil DHalocarbon ENU52 G
Diaphragmcoatingwithout OPFA BGold C
Furtheroptionsnofurtheroptions Ofurtheroptionsintext #
MOUNTING OPTIONS
InstrumentConnection,threaded,with capillary
18
www.pinter-gmbh.com
CHEMSEAL Diaphragm Seal Type MT (DIN 11851)
Technical Data Standard Options
Type DiaphragmsealaccordingtoDIN11851forfoodstufffitting/tubingacc.toDIN11850;flushdiaphragm,welded
Materialbody Stainlesssteel1.4404(AISI316L) Stainlesssteel1.4435(AISI316L);
Materialdiaphragm Stainlesssteel1.4404(AISI316L) Stainlesssteel1.4435(AISI316L);
Materialnut Stainlesssteel1.4301(AISI304) onrequest
Instrumentconnection 1/2“BSPfemale Weldingconnection;1/4“BSPfemale
Processconnection DIN11851(withnut)
Nominalpressure seedimensionaldrawings
Fillingfluid NEOBEE®M-20(FDA) onrequest
Further optionsCapillary
Coolingelement
DIMENSIONAL DRAWING
Body/Weldingconnection
DescriptionDiaphragmsealaccordingtoDIN11851forfoodstufffitting/tubing
Application• mediaseperatorforhot,liquidfoodstufforphar-
maceuticalproducts..
• FDAapprovedfillingfluid
• forpressureswitches,pressuregaugesand pressuretransmitters.
DN PN G [Rd] D H
25 40 52x1/6“ 63 14
32 40 58x1/6“ 70 14
40 40 65x1/6“ 78 14
50 25 78x1/6“ 92 15
65 25 95x1/6“ 112 15
80 25 110x1/4“ 127 17
100 25 130x1/6“ 149 19
www.pinter-gmbh.com
19
ORDER CODES (mostcommonoptions)
order code CS 09 x x - x - x F x O x
MaterialsBody/Diaphragm1.4571(316Ti) 2Body/Diaphragm1.4404(316L) 5Body/Diaphragm1.4435(316L) 7
Mounting
direct Adirectwithcoolingelement+200°C Lcapillary1m Bcapillary2m Ccapillary3m Dcapillary4m Ecapillary5m Fcapillary10m K
Nominalpressure/Nominalsize
DN PN25 40 00432 40 02640 40 00650 25 02165 25 02480 25 027100 25 029
Instrumentconnection
1/2“BSPfemale K1/4“BSPfemale 4weldingconnection S
Fillfluidwithout ONEOBEE®-M20,FDA-approved I
Furtheroptions
nofurtheroptions OsurfaceroughnessRA<0,8µm BsurfaceroughnessRA<0,4µm Cfurtheroptionsintext #
MOUNTING OPTIONS
InstrumentConnection,threaded InstrumentConnection,threaded,withcoolingelement
InstrumentConnection,threaded,with capillary
20
www.pinter-gmbh.com
CHEMSEAL Diaphragm Seal Type MT (IDF ISO 2853)
Technische Daten Standardausführung Optionen
AusführungDiaphragmsealaccordingtoIDF-NormISO2853
forfoodstufffitting/tubingacc.toBS4825P3orO.D.Tube;flushdiaphragm,welded
Materialbody Stainlesssteel1.4404(AISI316L) Stainlesssteel1.4435(AISI316L);
Materialdiaphragm Stainlesssteel1.4404(AISI316L) Stainlesssteel1.4435(AISI316L);
Materialnut Stainlesssteel1.4301(AISI304) onrequest
Instrumentconnection 1/2“BSPfemale Weldingconnection;1/4“BSPfemale
Prozessanschluss IDFNormISO2853(withnut)
Nenndruck seetable
Fillingfluid NEOBEE®M-20(FDA) onrequest
Further optionsCapillary
Coolingelement
DIMENSIONAL DRAWING
Body/Weldingconnection
DescriptionDiaphragmsealaccordingtoIDFISO2853forfoodstufffitting/tubing
Application• mediaseperatorforhot,liquidfoodstufforphar-
maceuticalproducts..
• FDAapprovedfillingfluid
• forpressureswitches,pressuregaugesand pressuretransmitters.
DN[inch]
DN [mm] PN G
[IDF] B H
1“ 25 40 1“ 30 21
11/2“ 38 40 11/2“ 30 13,5
2“ 51 25 2“ 30 15
21/2“ 63,5 25 21/2“ 30 20
3“ 76,1 25 3“ 30 22
www.pinter-gmbh.com
21
CHEMSEAL Diaphragm Seal Type MT (SMS)
Technische Daten Standardausführung Optionen
AusführungDiaphragmsealaccordingtoSMSNorm
forfoodstufffitting/tubingacc.toBS4825P3orO.D.Tube;flushdiaphragm,welded
Materialbody Stainlesssteel1.4404(AISI316L) Stainlesssteel1.4435(AISI316L);
Materialdiaphragm Stainlesssteel1.4404(AISI316L) Stainlesssteel1.4435(AISI316L);
Materialnut Stainlesssteel1.4301(AISI304) onrequest
Instrumentconnection 1/2“BSPfemale Weldingconnection;1/4“BSPfemale
Prozessanschluss SMS(withnut)
Nenndruck seetable
Fillingfluid NEOBEE®M-20(FDA) onrequest
Further optionsCapillary
Coolingelement
DIMENSIONAL DRAWING
Body/Weldingconnection
DescriptionDiaphragmsealaccordingtoSMSnormforfoodstufffitting/tubing
Application• mediaseperatorforhot,liquidfoodstufforphar-
maceuticalproducts..
• FDAapprovedfillingfluid
• forpressureswitches,pressuregaugesand pressuretransmitters.
DN[inch] PN G [Rd] B H
1“ 40 40x1/6“ 19 16
11/2“ 40 60x1/6“ 23 16
2“ 25 70x1/6“ 24 16
21/2“ 25 85x1/6“ 28 16
3“ 25 98x1/6“ 30 20
22
www.pinter-gmbh.com
CHEMSEAL Diaphragm seal Type CT (Tri-Clamp)
Technical Data Standard Options
TypeDiaphragmsealwithquicklockaccordingto„Tri-Clamp“-specificationforforfood
stufffitting/tubingaccordingtoBS4825P3andASMEBPE;flushdiaphragm,welded
Materialbody Stainlesssteel1.4404(AISI316L) Stainlesssteel1.4435(AISI316L);
Materialdiaphragm Stainlesssteel1.4404(AISI316L) Stainlesssteel1.4435(AISI316L);
Instrumentconnection 1/2“BSPfemale Weldingconnection;1/4“BSPfemale
Processconnection quicklockaccordingto„Tri-Clamp“-specification
Nominalpressure seedimensionaldrawings
Fillingfluid NEOBEE®M-20(FDA) onrequest
Further optionsCapillary
Coolingelement
DIMENSIONAL DRAWING
Body/Weldingconnection
DescriptionDiaphragmsealwithquicklockaccordingto„Tri-Clamp“-specificationforfoodstufffitting/tubing
Application• mediaseperatorforhot,liquidfoodstufforphar-
maceuticalproducts.
• FDAapprovedfillingfluid
• forpressureswitches,pressuregaugesand pressuretransmitters.
DN PN D d H b
3/4“ 40 25 38 10 2,85
1“ 40 50,5 38 10 2,85
11/2“ 40 50,5 38 10 2,85
2“ 40 64 38 10 2,85
21/2“ 25 77,5 38 10 2,85
3“ 25 91 38 10 2,85
www.pinter-gmbh.com
23
ORDER CODES (mostcommonoptions)
order code CS 10 x x - x - x F x O x
MaterialsBody/Diaphragm1.4571(316Ti) 2Body/Diaphragm1.4404(316L) 5Body/Diaphragm1.4435(316L) 7
Mounting
direct Adirectwithcoolingelement+200°C Lcapillary1m Bcapillary2m Ccapillary3m Dcapillary4m Ecapillary5m Fcapillary10m K
Nominalpressure/Nominalsize
DN PN3/4“ 40 0151“ 40 016
11/2“ 40 0172“ 25 018
21/2“ 25 0193“ 25 020
Instrumentconnection
1/2“BSPfemale K1/4“BSPfemale 4weldingconnection S
Fillfluidwithout ONEOBEE®-M20,FDA-approved I
Furtheroptions
nofurtheroptions OsurfaceroughnessRA<0,8µm BsurfaceroughnessRA<0,4µm Cfurtheroptionsintext #
MOUNTING OPTIONS
InstrumentConnection,threaded InstrumentConnection,threaded,withcoolingelement
InstrumentConnection,threaded,with capillary
24
www.pinter-gmbh.com
CHEMSEAL Diaphragm seal Type VT
Technical Data Standard Options
Type DiaphragmsealforVARIVENT® In-Linehousing;flushdiaphragm,welded
Materialbody Stainlesssteel1.4571(AISI316Ti) Stainlesssteel1.4404(AISI316L);Stainlesssteel1.4435(AISI316L);
Materialdiaphragm Stainlesssteel1.4571(AISI316Ti) Stainlesssteel1.4404(AISI316L);Stainlesssteel1.4435(AISI316L);
Instrumentconnection 1/2“BSPfemale Weldingconnection;1/4“BSPfemale
Processconnection forVARIVENT® In-Linehousing
Nominalpressure dependingonVARIVENT® In-Linehousing;
Fillingfluid NEOBEE®-M20,FDA-konform onrequest
Further optionsCapillary
Coolingelement
DIMENSIONAL DRAWING
Body/Weldingconnection
DescriptionDiaphragmsealforVARIVENT®in-linehousing
Application• mediaseperatorforhot,liquidfoodstufforphar-
maceuticalproducts.
• FDAapprovedfillingfluid
• forpressureswitches,pressuregaugesand pressuretransmitters.
DN D d1 H
25/1“ 66 50 19
40-125/11/2“-6“ 84 68 19
www.pinter-gmbh.com
25
ORDER CODES (mostcommonoptions)
order code CS 11 x x - x - x F x O x
MaterialsBody/Diaphragm1.4571(316Ti)Body/Diaphragm1.4404(316L)Body/Diaphragm1.4435(316L)
Mounting
direct Adirectwithcoolingelement+200°C Lcapillary1m Bcapillary2m Ccapillary3m Dcapillary4m Ecapillary5m Fcapillary10m K
NominalsizeforhousingDN25/1“ 015forhousingDN40-DN125/11/2“-6“ 016
Instrumentconnection
1/2“BSPfemale K1/4“BSPfemale 4weldingconnection S
Fillfluidwithout ONEOBEE®-M20,FDA-approved I
Furtheroptions
nofurtheroptions OsurfaceroughnessRA<0,8µm BsurfaceroughnessRA<0,4µm Cfurtheroptionsintext #
MOUNTING OPTIONS
InstrumentConnection,threaded InstrumentConnection,threaded,withcoolingelement
InstrumentConnection,threaded,with capillary
26
www.pinter-gmbh.com
CHEMSEAL Diaphragm seal Type PT
Technical Data Standard Options
Ausführungspecialdiaphragmsealforliquefiedfiberandcellulosicsuspensions,
frontfacingdiaphragm,welded
Materialbody Stainlesssteel1.4571(AISI316Ti) onrequest
Materialdiaphragm Stainlesssteel1.4571(AISI316Ti) onrequest
Materialclampingflange Stainlesssteel1.4301(AISI304) onrequest
Instrumentconnection 1/2“BSPfemale Weldingconnection;1/4“BSPfemale
Processconnection DN48 onrequest
Nominalpressure PN40
Fillingfluid Multipurposeoil(-20°C-+200°C) NT-/HT-Öl
Further optionsCapillary
Coolingelement
DIMENSIONAL DRAWING
Body/Weldingconnection
DescriptionDiaphragmsealforpaperandpulpindustry
Anwendung• specialdiaphragmsealforliquefiedfiber andcellulosicsuspensions
• forpressureswitches,pressuregaugesand pressuretransmitters
• forhot,pollutedoraggressivemedia
www.pinter-gmbh.com
27
ORDER CODES (mostcommonoptions)
order code CS 08 x x - 002 - x F x O x
MaterialsBody/Diaphragm1.4571(316Ti)Body/Diaphragm1.4404(316L)Body1.4571(316Ti)/DiaphgramTantalum
Mounting
direct Acapillary1m Bcapillary2m Ccapillary3m Dcapillary4m Ecapillary5m Fcapillary10m K
Instrumentconnection
1/2“BSPfemale K1/4“BSPfemale 4weldingconnection S
Fillfluid
withoutMultipurposeoilLowtemperatureoilHightemperatureoil
Furtheroptionsnofurtheroptions Ofurtheroptionsintext #
MOUNTING OPTIONS
InstrumentConnection,threaded InstrumentConnection,threaded,withcoolingelement
InstrumentConnection,threaded,with capillary
28
www.pinter-gmbh.com
CONVERSION TABLE FOR PRESSURE UNITS
www.pinter-gmbh.com
29
INQUIRY CHECKLIST CHEMICAL SEALS (BY FAX TO +49-6262-92670-99)
30
www.pinter-gmbh.com
FURTHER PRODUCTS FROM PINTER
PRESSURE SWITCHESaresignalelementswhichareusedforpressuremeasu-ring inpressure lines forgases,vapours, liquidsorsus-pensions.Theswitchpointsaretransformedintoanelec-tricorpneumaticoutputsignalwhichisnecessaryforthecontrolandregulationofprocesses,e.g.safetyandalarmdevices.
DIAPHRAGM SEALSare mechanical process separating elements which aremountedonmeasuringinstrumentsdirectlyorviacapilla-ry;withdiaphragmsealsthemeasuringinstrumentisse-paratedfromtheactualprocesstoprotecttheinstrumentfromhot,polluted,aggressiveorchrystalizingmedia.
PRESSURE GAUGESaremechanical pressure indicators. The actual processpressureactsonameasuringelementanddeformsit.Thedeformationisconvertedintoa270°rotatingmotionbytheattachedmovement.Duetotheelectricity-freefunction,pressuregaugesevenremainfullyfunctionalintotaldamageoccurance.
PRESSURE GAUGESaremechanical pressure indicators. The actual processpressureactsonameasuringelementanddeformsit.Thedeformationisconvertedintoa270°rotatingmotionbytheattachedmovement.Duetotheelectricity-freefunction,pressuregaugesevenremainfullyfunctionalintotaldamageoccurance.
INDICATORS AND SIGNALPROCESSORSare interfaces between measuring instruments and theprocesscontrol.Supplyisolationamplifiersprovidepres-suretransmitterswiththerequiredoperatingvoltage.Withgraphicsdisplaysmostdiverseinformationcanbevisua-lizedandarchivedamongotherthings.ForsafetyrelevantfunctionsPINTERoffersprovenandtestedsignalproces-sorswithSIL2classification.
SYSTEM SOLUTIONSPINTER is a specialist for industrial measurement andcontrolsandoffersasuitableinstrumentincludingneces-saryaccessoriesforalmostanyapplication:Fromstandard to the tailor-madesolution foryourappli-cation. PINTER develops and manufactures completemeasuringandcontrolsystemsforyou-competently,ef-ficientlyandwithmostmoderntoolsandmachinery.
www.pinter-gmbh.com
31
IMPRINT
PINTERMess-undRegeltechnikGmbHKraichgaublick17TechnologieparkNeckartal-Odenwald74847ObrigheimamNeckar
Fon: +49(6262)92670-0Fax: +49(6262)92670-99Email: [email protected]: www.pinter-gmbh.com
MangingDirectors:Dipl.-Kfm.(FH)IngoPinterRegistered: DistrictCourtofMannheim,GermanyHRB335910VAT-No.: DE812439496
Allgiveninformationand/ortechnicaldatainthisdocumenthavebeenpreparedverycarefullyandreflectthestateoftheartwhenprinted.Informationand/ortechnicaldatamaychangewithoutprior notice.
Allgiveninformationand/ortechnicaldatainthisdocumentarenotbindingandforinformationpurposesonly.Binding informationand/or technicaldatacanbeobtained fromourquotationsand/ororderconfirmations.
Pleaseunderstandthatwecannotbeheldresponsibleforthecorrectnessofanygiveninformati-onand/ortechnicaldatainthisdocument.
WheninstallingormaintainingPINTERproductsalwaysrefertothecorrespondingoperatingma-nualandtechnicaldatasheet.
Allmentionedproductnames,productdesignations,productdescriptionsand logosaretrade-marksandpropertyoftheirrespectiveowners.
CHEMSEAL,DIMIO,INDUSENS,INDUSWITCH,INTELLICOMB,MANOCOMB,MINICOMBaretrademarksand/orregisteredtrademarksofthePINTERMess-undRegeltechnikGmbHand/ortheiraffiliatedcompaniesinGermany,theEuropeanUnion,Switzerlandand/orothercountries.TheuseofPINTERtrademarksisprohibitedifnotclearlyagreedotherwise.
DISCLAIMER
COPYRIGHT
Reprintingand/orduplicatingthiscatalogueoranypartofthiscatalogueisprohibitedifnotclearlyagreedotherwise.
CATALO
GUE-CHEMSEAL.14R1.EN
Distributore esclusivo per l’ItaliaDELTA STRUMENTI S.r.lVia Mattei 6 - 21036 GEMONIO (VA)Tel 0332 604.667 - Fax 0332 [email protected] - www.deltastrumenti.it