product catalogue - caddetails · as all pool grates are suitable for light-duty pedestrian...

PRODUCT CATALOGUE

product catalog

Jonite is your partner in green and sustainable design. Green Label certifi ed, Jonite meets the Singapore Environment Council’s requirements for low carbon emissions and 30% or more recycled content. In the drive towards sustainable construction, the Building and Construction Authority of Singapore Green Mark scheme recognises the use of Green Label certifi ed products, and awards merit points for their usage.

Through the LEED® (Leadership in Energy and Environmental Design) green building certifi cation programme, the U.S. Green Building Council is transforming the built environment. Jonite products contribute toward satisfying MR Credit 4: Recycled Content under LEED®. The LEED® Green Building Rating System is the nationally accepted benchmark for the design, construction and operation of high performance green building in the U.S.A.

The majesty of natural stone is perhaps best expressed by the magnifi cence of the stone castles of England. Inspired by the rustic appeal of natural stone, we wondered if the material could be used to make functional and beautiful grates...Yet, the sheer cost of using thick slabs of natural stone proved to be commercially unviable. Natural stone, although having aesthetic appeal, was too weak and unreliable to satisfy safety standards and requirements. A new solution had to be found.

Over four painstaking years, we worked hard to make our muse a reality. We embarked on an expedition to fi nd the answer, investigating minerals and formulation technology. So driven by our passion were we that we faced down signifi cant technological and fi nancial challenges during this period. Infl uenced by the very material we were studying,we found rock-steady strength and perseverance to fi nally emerge with the innovation that is Jonite.

Creating Jonite was the fi rst part of the journey. The other was in ensuring its consistent quality. Due to our completely new technological and production requirements, there were no satisfactory standard machines we could use for mass production. We spent a further two years consulting with international engineers, building from scratch an automated production line.

Today we are proud to offer you the durability, sustainability and sheer beauty of natural stone with Jonite.

The Jonite Story

Jonite, Your Green Partner

Jonite aims to drastically reduce carbon emissions by incorporating at least 30% recycled content in our products. The use of Jonite in place of steel gratings will also contribute to the lowering of carbon emissions from the steeland iron work industries.

product catalog

POOL GRATES

PERFORMANCEPedestrian: Light Duty (5KN) (Strictly for pedestrian use only)

TYPE• BabyPebbles Model• ChiseledRain Model

APPLICATIONPool Overfl ows, Pool Decks, Home Scuppers, etc.

COMPLIANCENon-compliant with BS EN 124:1994

COMPATIBLE DRAIN WIDTH190mm to 300mm

THICKNESS25mm to 30mm

MATERIALJonite Stone (reinforced)

OPTIONAL• Custom Sizes, Colours and Patterns• Custom Curves• IllumGrates®• L-Trimmers• Stud Trimmers

STANDARD COLOURSPlease refer to Colour Samples• Darker colours are suitable only for non-chlorinated water systems.• Surface texture is smoother than Channel Grates and Tree Grates. (Please refer to actual sample).

OTHER APPLICATIONS• Water Feature Grates• Underwater Grates

Swimming pools are no longer seen just as an amenity; they are today part of an enticing landscape. With its natural good looks and suitability as grating superior to natural granite, Jonite makes for the perfect pool grates.

Toddler-FriendlyThe small elliptical holes of BabyPebbles and thin slit slots of ChiseledRain eliminate the danger of toddlers catching their toes in the grating.

Consistency Of ColourJonite’s low water absorption of 0.5% enables gratings to maintain their colour when in contact with pool water, unlike natural granite and stone slabs.

product catalog

POOL GRATESOptional Features and Accessories

Stud TrimmersThis new feature improves the effi ciency of the fl ow rateto an existing pool grate. They can also be used individually for non-perforated granite and stone slabs which are totally below the acceptable fl ow rate.

Grate Tiles And 90° Corners Pool GratesGrate tiles are used in irregular drain connections, and are cut according to site requirements by the installer. Available in limited models only, the 90° Corners Pool Grates allow a perfect perpendicular turn.

InstallationAs all pool grates are suitable for light-duty pedestrian applications, it is possible for the grates to sit directly on the drain shoulder seating tiled or just screeded. However, the area of the seating must be fl at and level.

Custom Curve GrateJonite curve grates are available in any radius at an affordable cost. We also maintain a shortlist of custom curve grates for architects to keep costs low. This listis available upon request.

IllumGrates® For Pool GratesJonite IllumGrates are designed to incorporate the secure placement of waterproof LED lights in the holes of the channel grates. IllumGrates combine the functionality of drain gratings with the aesthetic possibilities of LED lighting throughout the perimeter of the pool.

Maintenance And Restoration All pools are subject to algae growth on the tiles and grates if not regularly maintained. Effi cient water circulation and correct sanitiser levels can successfully prevent algae growth. Algae-stained pool grates can be easily restored with Kleansol™ solution diluted as per instructions.

product catalog

CHANNEL GRATES

PERFORMANCE• Light Duty (A15)• Heavy Duty (B125)• Extra Heavy Duty (C250)• Custom Heavy Duty (D400, E600, F900)

APPLICATIONPedestrian, Light Vehicular, Heavy Vehicular, Fire Engine Access and Aircraft moving areas

COMPLIANCECompliant with BS EN 124:1994

COMPATIBLE DRAIN WIDTH90mm to 405mm (Please refer to General Specifi cations on Grating)



OPTIONAL• Custom Sizes, Colours and Patterns• IllumGrates®• L-Trimmer• Stud Trimmers• Custom Curve Grates• Custom Heel-guard Grates• Custom Lockable Grates• Custom Grates for Highly Corrosive

Environments

STANDARD COLOURSPlease refer to Colour Samples

Jonite Stone (reinforced) gratings have redefi nedthe role of gratings in the architectural industry.With Jonite, gratings have moved beyond being merely functional into the realm of design elements.Versatile Colour MatchingWhat makes Jonite different? The answer is ‘Unlimited range of colour customisation’. Architects have access to unlimited colour choices, gaining an exceptional advantagein their designs.

High Mechanical IntegrityJonite Stone (reinforced) gratings are engineered to sustain load performances from pedestrian to vehicular according to the standard as specifi ed, and are compliant with International Standards such as BS EN 124:1994. (See General Specifi cations for more details)

Low Heat Absorption Jonite absorbs much less sun heat than traditional ferrous gratings, making it a more comfortable material to have around the house and in children’s playgrounds. In addition,it has dielectric properties equal to porcelain, making it an excellent electric insulator as well.

product catalog

CHANNEL GRATESOptional Features and Accessories

Heel-Guard GratesSpecially designed with elegant ladies in mind, Jonite’sHeel-Guard grates have slim 6mm slots and small radius fi llets to prevent high heels from being caught in the grates. Compliant with ADA requirements, these are extremely useful for cut-off or scupper drains of the entrance or concourse areas of a building.

Grates For Highly Corrosive EnvironmentsJonite gratings are generally suitable for all environments. However, extreme environments such as frequently fl ooded or consistently water-submerged areas and areas of corrosive chemical exposure would require special considerations. We are able to offer Jonite products tailor-made to higher specifi cations as required.

L-Trimmers L-Trimmers are always recommended for gratings built for heavy-duty applications and above. They are designed to provide aesthetic fl air as well as ideal support for all Jonite gratings.

Lockable Grates Jonite gratings are relatively safe from vandals even withouta locking system. Metal gratings are most commonly stolen to be sold for scrap; Jonite has no scrap value and is thus safe from theft. However, it is a mandatory requirement in many countries for public gratings to have locking systems installed. Our Lockable Grates are customisable to any size.

Custom Curve Grates Of Various Radii Jonite curve grates are available in any radius at an affordable cost. We also maintain a shortlist of custom curve grates for architects to keep costs low. This list is available upon request.

IllumGrates® Jonite IllumGrates are designed to incorporate the secure placement of waterproof LED lights in the channel grates. IllumGrates combine the functionality of drain gratings with the aesthetic possibilities of LED lighting, applicable for guiding vehicles in driveway and other possibilities. IllumGrates is the perfect marriage of elegant stone gratings with modern LED lighting.

product catalog

PERFORMANCE• Pedestrian: Light Duty (5KN) (Strictly for pedestrian use only)• Wheelchair-friendly design is subject to the pattern and design of each creative grate.

APPLICATIONPool decks, home drains and areas without vehicular loading


COMPATIBLE DRAIN WIDTHPlease refer to General Specifi cationson Creative Grates



OPTIONAL• Custom Sizes, Colours, Textures

and Patterns• IllumGrates®• L-Trimmers • Stud Trimmers


CREATIVE GRATES

Jonite standard ‘slotted designs’ gratings accord optimum performance and functionality. A varietyof more creative designs have also been createdfor enhanced sensibilities.

Creative CollectionJonite creative grates come in four categories: Pattern, Nature, Modern and Avant-Garde Collections. Our comprehensive range offers a multitude of themes and designs for architects to choose from. Looking for a little something special? Jonite’s Custom Design Services is always ready to take on the challenge of customising a design just for you.

Specifi c Load ConstraintsThese creative grates are suitable strictly for pedestrian use at 5KN static loading(i.e. approximately seven to eight persons standing on one piece of grate). However, heavy loading capacities are achievable with customised solutions from our Custom Design Services.

product catalog

CREATIVE GRATESA new concept in creativity

Chiseled Rain (The Avant-Garde Collection)Patterned with natural chisel marks, ChiseledRain’s geometrical abstraction lends itself well to a variety of themes; whether contemporary or traditional, western or oriental.

StoneWeb (The Avant-Garde Collection)StoneWeb is a linear graphic perspective design that gives a dazzling sense of movement in a web-like pattern. Arranged in different orientations, an astonishing array of decorative formations can be achieved.

Forest (The Nature Collection)Jonite natural stone fi nishes are the ideal choice for nature areas such as gardens and landscaped parks. Forest is outstanding in its appropriateness of design for this purpose. The intersection of multiple leaves, it revealsa mysterious presence within the unrestrained appearance of a forest - a surreal reality.

Twister (The Avant-Garde Collection) Twister is a continuous 3D perspective inspired bythe twist and turn of a long, perforated stone slab.It expresses a dynamic, dramatic personality.

CrossStitch (The Modern Collection) CrossStitch is simple in design but presents a higher performance than most of the other designs. Its weave pattern displays an elegant contemporary outlook of a timeless design.

Complete Design Integration Of Tree Grates And Channel GratesJonite is continually developing integrated sets of tree grate and channel grate designs. This helps architects and designers achieve complete and consistent themes.

product catalog

PERFORMANCE• Pedestrian: Light Duty (5KN)

(Strictly for pedestrian use only)• Vehicular: Heavy Duty

(For selected models/customise only)

APPLICATIONPool decks, home drains and landscape areas

COMPLIANCE• Compliant with PSB SS 213:1979

(unless otherwise stated)• Non-compliant with BS EN 124:1994




and Patterns• Universal Adaptors• PVC Strainers• Foul Air Restrainer


We have created probably the world’s fi rst stone homogenous fl oor trap, achieving desired spontaneity through functional designs. Our aimis to continue to design and produce fl oor traps that blend seamlessly into fl ooring of any material.

FLOOR TRAPS

Versatile Colour-Matching Jonite is available in a wide range of standard colours developed to assist architects to quickly pick the colour they need. More specialised colours are also possible with our unlimited Colour Customisation process which allows Jonite to be calibrated to any hue or shade desired.

Functionality And SustainabilityJonite fl oor traps are engineered to fulfi l crucial functions while remaining an integral component of the structural fl oor. Waterproofi ng is foremost in our designs, as is the prevention of infi ltration by insects and foul air. Special PVC strainers and restrainers fi tted with our fl oor traps work to achieve hygiene and aesthetics.

product catalog

UNIVERSAL ADAPTORPLATE METHOD

STANDARD FLOOR TRAP

ANY uPVC PIPE, SS304 OR THREADED PIPE ARE ABLE TO BE INCORPORATED

UNIVERSAL ADAPTOR PLATE FUSED TO FLOOR-TRAP

PVC FOUL-AIR RESTRAINER

PVC STRAINER

* ’K’ TYPE FLOOR TRAP

PVC

DO

WN

PIPE

PVC

DO

WN

PIPE

** STANDARD FLOOR TRAP

RUBBER SEALTO PREVENT FOUL-AIR FROM ESCAPING

* ’K’-Type Floor-Trap is designed to accommodate the PVC Foul-air Restrainer

** Most Standard Floor-Trap is designed to accommodate the PVC Strainer

PVC STAINER WITHCOLLAPSIBLE LID

FLOOR TrapsFloor-bonded

Classic, Hinged And Modern Collection(See General Specifi cations for more details)

Removing fl oor trap covers is often a horrifying event. Jonite’s smooth, contoured inner base and corrosion-free property ensures that cleaning nightmares are a thing of the past. In addition, Jonite’s customised colours and designs easily complement your idea for the dream bathroom.

PVC Foul-Air Restrainer And PVC Strainer Jonite fl oor traps are designed to accommodate PVC Strainers and Foul-air Restrainers to prevent insectsand unpleasant odours from arising.

Tile-Up Collection(See General Specifi cations for more details)

Clean, seamless and corrosion-free, our Tile-Up Collection uses existing fl oor tiles with slit gaps as the solution preferred by architects. Developed in answer to the usual option of raw concrete screeds, unstable covers and untidy holes, the Tile-Up Collection is an aesthetically pleasing, easily installed and effective system. Mini shower traps and other customisable shapes are also available.

Universal Adaptor Plate (UAP) The UAP was created to enable Jonite to be fi tted to any downpipe connections, making Jonite suitable for use in various countries with different specifi cations. Pipes of any size or material can be fused into the Jonite plate and factory incorporated to the fl oor trap as illustrated.

product catalog

SUMP GRATES/COVERS

PERFORMANCE• Light Duty (A15)• Heavy Duty (B125)• Extra Heavy Duty (C250)• Custom Heavy Duty (D400, E600, F900)

APPLICATIONPedestrian, Light Vehicular, Heavy Vehicular,Fire Engine Access and Aircraft moving areas

COMPLIANCECompliant with BS EN 124:1994

COMPATIBLE DRAIN WIDTHPlease refer to General Specifi cations on Sump Grates/Covers

THICKNESS25mm to 75mm(depending on application)


OPTIONAL• Custom Sizes, Colours and Patterns• IllumGrates®• L-Trimmer Frames• Stud Trimmer Frames• Heel-guard Grates• Lockable Grates• Hinged System• Splines• Customisation of Grates for Highly

Corrosive Environments


Jonite sump grates are designed to be used on point drainage systems, including as intermediaries of long open-channel drainageas well as kerb-side drainage. With load applications similar to channel grates, Jonite sump grates offer style, security and functionality.

Cost-Effective And Sustainable Jonite sump grates and covers come in a wide range of standard sizes that can be assembled with the addition of Jonite splines to form huge covers, giving you cost-effectiveness and sustainability. For bigger multiple covers, a metal sub-frame maybe used. However, the sub-frame must be designed to sustain the required loadingon the entire cover.

product catalog

SUMP GRATES/COVERSOptional Features and Accessories

L-Trimmer FramesL-Trimmer frames are mainly used for supporting sump grates, especially for heavy-duty applications and above. They provide a perfect fl at surface and seating allowance to maximise performance of the sump grate. Our frames are aesthetically designed to work within the overall look and feel of the area.

Splines Splines are available in matching look and feel to the grates they are used with. They are reinforced and strengthened to sustain the load of two pieces of grates or more, according to the load required. Both ends of the spline must be embedded into the concrete with suffi cient seating of the drain recommended.

Lockable SystemThe optional Lockable System feature for our sump grates is available upon request and is available for all applications and sizes. The L-Trimmer Frame comes with embedded nuts and stainless steel 304 fastening bolts.

Hinged System The optional Hinged System feature for our sump grates is available upon request and is suitable for all applications and sizes. The exposed hinge components are made of stainless steel 304 with weather-proof polyurethane dampers.

Multiple Sump Covers Using Metal Spline Method Huge sump covers may not be attainable in Jonite, but using Jonite’s standard sump covers in sectional form is a more cost effective solution. They aresupported by metal splines specially designed to sustain the required loads as illustrated.

Spline

product catalog

TREE GRATES

PERFORMANCEStrictly pedestrian only


COMPATIBLE SIZESRefer to General Specifi cations onTree Grates

THICKNESS30mm



and Patterns• Metal Supporting Frames• Special Design for Vehicular Loading• Special Design for Highly Corrosive

Environment• IllumGrates®


Available in a variety of designs, shapes and sizes,Jonite tree grates effortlessly integrate into the cityscape, providing space for trees to grow and develop their rooting systems, while allowing additional pedestrian traffi c. The use of our tree grates help to circumvent rooting problems while adding fl air and identity. Masonry vs. HardwareUnlike metal alternatives, Jonite’s natural stone properties effectively synthesise with the surroundings for a pleasing feel.

Night Illumination Jonite’s tree grates allow fully customisable light ports or sockets for the installation of many different types of lights for night illumination to add an exciting dimension to the natural beauty of trees.

Embossed Insignia With Jonite, you can easily emboss a corporate insignia or municipal logo right onto the tree grates in use in your environment, giving an exclusive identity to the locale.

product catalog

TREE GRATESA Complete Tree Protection System

Jonite Stone (Reinforced) Tree GratesJonite Stone (reinforced) tree grates come in a wide range of attractive designs, and are also customisable in terms of colours, sizes, designs and application.

Metal Supporting FramesUsually assembled in two sections or more, Metal Supporting Frames are used in supporting the sectional panels of Jonite tree grates away from the soil. This maintains a good clearance for rooting and prevents soil compression caused by placing tree grates directly onto the soil surface. Concrete BasesConcrete bases can be either cast on site or prefabricated by a local contractor. The lower base openings allow excessive water to drain off, while the concrete base itself controls surface rooting, retaining good soil condition. In some cases, a complete concrete pit for the tree is incorporated into the ground.

Design ServicesJonite’s advantage lies in its low tooling cost, passing on savings to architects and allowing them to customise and formulate new and creative aesthetics to support their design theme. Our team of designers is able to develop a full range of channel gratings derived from our standard tree grates. This integrated collection will eventually offer enhanced architectural choices.

Beautiful Yet FunctionalJonite toilet grates are beautifully crafted yet created to serve a specific need of dispersing excess and unwanted liquids in highly populated public toilets. Be it in urinals, wash basinsor even in cubicles, Jonite toilet grates performs purposefully and more.

GRATESTOILET

PERFORMANCEPedestrian : Light Duty (5KN - 15KN)(Strictly for pedestrian only)

TYPE Slotted Model Waveline Model

APPLICATIONShopping Malls, Public Toilets,Schools, etc.

COMPLIANCESelected compliant with BS EN 124:1994

COMPATIBLE DRAIN WIDTH150mm to 460mm


MATERIALJonite Stone (Reinforced)

OPTIONAL Custom Sizes, Colours and Patterns Custom Curves


Jonite toilet grates have redefined the way public toilets are seen. With natural stone textures andcontemporary designs, Jonite has truly transformedthe landscape of a toilet.

GRATESTOILET

Rounded Edge Profiles

Waveline Design

Slotted Design

Customization

With its specially rounded curve profiles, liquids are easily flushed away from the surface of the grates. This prevents any liquids from stagnating on the surface as well as easy cleaning and maintenance. Even with the rounded curve profiles, the matte stone textures still provides a natural slip resistance.

Jonite toilet grates comes in two standard designs, the Slotted & the Waveline, or are fully customizable. Custom colours, designs, sizes and textures are all available upon request.

Toilets redefined

9

R8

PERFORMANCE

COMPATIBLE SIZESRefer to General Specifications onStreet Furniture

MATERIAL

OPTIONAL• Custom Sizes, Colours, Textures & Patterns• Custom Metal or Timber Panels integration

• Special Design to Architect’s Specification

STANDARD COLOURSPlease refer to Samples Colour

• Special LED lightings embedment

• Custom Anchorage System subject to ground condition and substrates used

The Banco Series

BancoBR 300

APPLICATIONS

• Public Audiences• Anti-Vandalism• Weather Punishable

• Public Nature Parks• Commercial Open Spaces• Outdoor Amenities

• Jonite Stone (reinforced) (Using more than 30% of recycle material)

'LEED' and related logo is a trademark owned by the U.S. Green Buildingcouncil and is used by permission.

022-016ECO-FRIENDLYBUILDING MATERIAL

(16 standard colours)

OTHER CUSTOMISED PRODUCTS

• Trash Bins• Bollards with & w/o Lighting• Bicycle Stands• Signages / Embossed Floor Buttons

Philosophy

Custom Design on Panel Grates The Banco can easily create special design representing a corporate insignia or municipal logo on the panel-grate, giving an exclusive identity to the parks or commercial open spaces.

Banco is created using contemporary, ergonomic and versatile designs of structure elements such as pedestals and panels using various creative components. Customizable with unlimited colours, patterns & textures. Alternatively, it allows integration with other materials tastefully with simplicity, reducing installation time as well as customisation cost.

STREET & PARKFURNITURE

The utilization of ready-made standard or customised components in fully knock-down or pre-assembled system maintains its sturdy stone structure while justisfying cost-effectiveness of its class.

Jonite brings you the first collection of Banco Series street furniture for nature parks and open spaces. An exciting new concept by attempting to eliminate the perception of conventional bulky and heavy stone furniture.

Lower-ArcComponent

Mini Panel-Grate (front)

End Pedestal

IntermediatePedestal

Top-ArcComponent

Centre-ArcComponent

Standard Panel-Grate

Mini Panel-Grate (back)

End Pedestal

Mini Panel-Grate (front)

IntermediatePedestal

Lower-ArcComponent

Standard Panel-Grate

780

44

7

823

Final Floor Level

Embedded Anchorage Fixing System (may depending on type of construction)

Substrate

Concrete Base

44

7

638

Final Floor Level

Tile / Carpet

Concrete Base

1700mm (3 Seater)

500 500 50050 50 5050

1150mm (2 Seater)

638

Free standing w/o ground anchorage is available forBR 300 or SS 210.Special surface base-plate may require depending on application.

The Banco Series is redefining style with its iconic profile. Uniquely shaped in an ergonomic design to bring comfortability and durability together.

BancoBR 300

BancoSS 210

Other accessories derivedfrom the same design theme such as trash-bin, bollard and signage.

Fasten to the floor thru’ the pedestal with expanded bolting system and cap withdome-plugs

The assembling time for theBanco BR 300, 2 seater takes2 men in less than 10 minutes

Fasten stainless steel stud-rods thru’ the pedestals and cap with dome-plugs

STREET & PARK FURNITURE

Dome-plugDome-plug

Embedded Anchorage Fixing System (may depending on type of construction)

product catalog

CUSTOMISATION

Jonite Design Services comprises a team of creative designers and experienced engineers working in close collaboration with our Research and Development team. With our integrated operations, we bring you a one-stop support service that assists architects all the way from design concept to the fi nal physical product.

Jonite is a proprietary formulation and original technology that can be applied to more than justthe standard products currently in our catalogue. Eminently attractive, Jonite presents endless possibilities in size, colours, performance and application and is limited only by one’s imagination.

Customisation For All Standard ProductsOur Design services are able to customise all Jonite standard products such as pool grates, channel grates, sump grates, fl oor traps and tree grates in terms of size, application and even special functions as required.

Solution Ideas A vast range of products in architectural, construction and even industrial applications such as cladding, bollards, street furniture, containment, external feature walls and machine base can be achieved. We listen to your requirements, producing feasible proposals that aim to achieve cost effectiveness, functionality, practicality and aesthetics.

product catalog

CUSTOMISATIONRealising your ideas

Our design team is dedicated to working hand-in-hand with architects and designers to overcome the constraints of different materials so as to achieve the designs of your visions.

Commonly requested customisation in standard products are colours, sizes, patterns and applications.

Curve For Gratings – The meandering curve grates for pools and other amenities are available in many radii. Tooling is required for each specifi ed radius.

Loading For Gratings – Special performance loads can be achieved. These include loading for fi re-engine hard standing area of D400 (11.5 tonne wheel-load), and even F900 (exceeding 20 tonne wheel-load) for high imposed loading areas such as airport and ports for vehicles with solid tyres.

Loading For Tree Grates – While most tree grates are designed for pedestrian application, vehicular loadingmay be required sometimes for maintenance vehicles. This is achievable with our special custom designs.

Submergible Vertical GrateThis is a strong and durable vertical grate to be used underwater for dolphin pools, constructed with no metal fastener, yet aesthetically pleasing and functional.

Material FusionThe fl exibility of Jonite allows seamless fusion with a variety of materials like stainless steel and wood. The process creates a fi nish that is unique in both look and feel and is perfectly suited for customised Jonite products.

Circular Grate For Water FeatureCommissioned for use within a hard-standing area, this grate boasts a D400 (11.5 tonne wheel-load) performance. Laboratory testing for strength and destruction was carried out prior to production to ensure utmost safety.

Home And Street FurnitureWorking with perforations, textures, fusion of materials and customised designs, the possibilities of creating customised or modular home and street furniture are endless and exciting.

product catalog

ACCESSORIES

Channel Grates

Extend functionality and add more fl air to standard Jonite channel grates, sump grates/covers, pool grates and tree grates.

90° Corner Grate (Channel grates/Poolgrates)

L-Trimmer(Channel grates/Poolgrates)

Grate Tile (Channel grates/Poolgrates)

Tile Strips(Channel grates/Sump grates)

Grate Shim(Channel grates/Sump grates)

‘L’ Curve Trimmer

Custom Curve grate(Channel grates/Poolgrates)

for Standard Products

90° Corner Grate Available in limited channel and pool grate categories only. In place of the corner grate, two pieces of regular grates may be used. However, for heavy duty and above applications, it is advisable to incorporate a spline below the grate to sustain the required load.

Grate TilesGrate tiles are used when a drain encounters an irregular connection. The light duty models may be cut on site by the installer. Heavy duty and above models should be factory-fabricated according to templates attained from site by the installer.

Grate Shims And Tile StripsA grate shim is a fl at strip of various thickness and approximately 30mm width, used to raise the grating to the desired height. It is fused permanently to the base of the grating during the factory process.

Tile strips give an added fl air to the edge of gratings covering concrete drains. Installable with SealFix™ 103, these tile strips are approximately 10mm thick and made of similar material as the grating.

Custom Curve Grates And L-Curve TrimmersJonite curve grates are available in any radius at an affordable cost. We also maintain a shortlist of custom curve grates for architects to keep costs low. This list is available upon request.

Sump Grates

L-Trimmer Frame (Sump grates only)

L-Trimmers And L-Trimmer FramesL-Trimmers and L-Trimmer Frames are recommended for Heavy Duty Gratings and above, providing aesthetical fl air and high performance support for channel and sump grates.

SplinesSplines are available in matching look and feel to the grates they are used with. They are reinforced and strengthened to sustain the load of two pieces of grates or more, according to the load required. Both ends of the spline must be embedded into the concrete with suffi cient seating of the drain recommended.

Spline (Sump grates/covers)

product catalog

ACCESSORIESfor Standard Products

Tree Grates Pool Grates

Tree Grate ReducersReducers come in various inner and outer diameters and simple universal patterns, enabling them to suit various tree-grate models. Its main purpose is to allow a simple removal when the growth of the tree requires expansion of the tree grate.

Pool Grate Blank EndsBlank ends come with an wider allowance of 50mm on each side of the grate for trimming, thus creating curvature without using curve grates. Alternatively, they can also be used for end pieces with odd lengths.

Reducer (Tree grates)

All Jonite products are impregnated with a thin fi lmof ShieldFix™ 108, a clear stone sealer. It acts as a protective veil during installation and handling. It has a very high compressive strength, remarkable cohesion and superior hardness and high wear-and-tear resistance, and is suitable even for driveways.

Surface Preparation1. ShieldFix™ 108 is a two- component solvent-based coating in a matt fi nish.2. Re-coating is possible if attempted in a proper environment and clean surface condition, using the correct application method.

MAINTENANCEAccessories

Jonite, like any other natural stone material, can be chipped by hard or sharp objects at impact or damaged as a result of mishandling. Our handy REPAIR KIT, an epoxy putty fi ller system, allows you to easily make needed repairs.

The pre-mixed fi ller comes in standard colours that can be custom-matched as required. The repair is not superfi cial; rather it fuses to the core of the affected area as an integral unit, creating an even stronger bond than its original state. This formulation is specially designed for Jonite products only.

SealFix™ 103 is a two-part epoxy mortar specially formulated for fi xing Jonite components such as L-Trimmers or Frames used for heavy-duty performance. It has high strength bonding, is impermeable and chemical-resistant and suitable for ‘dry-fi xing’.

Surface PreparationSurface to be sealed must be fl at, solid and stable. All loose particles, oil, paint, wax or any substance that may inhibit adhesion must be removed. Adequate preparation via suitable mechanical means like scrabbling, grit blasting or needle gunning is crucial.

A new propriety solution, Kleansol™ 511 is a stain and algae removal solution specially formulated for soiled Jonite products, especially pool grates. For normal cleaning, apply the solution to the surface for 15 to 30 minutes before scrubbing or water-jetting. For heavily soiled gratings, soak for one to two days.

Packing1. Available in 1-litre, 5-litre and 25-litre packing. PVC containers of 75-litre and 125-litre capacity for soaking are available upon request.2. Glass marbles for the stacking of gratings during soaking are also available upon request.

Repair Kit SealFix™ 103 Kleansol™ 511 ShieldFix™ 108 Lifting Hooks

Lifting hooks are used for the installation and removal of gratings. Most gratings are designed with an up-lift force of less than 50kg, requiring only a maximum of two people to lift. For heavier gratings, a pair of T-bars is recommended. T-bars are available in steel and various materials to suit different sizes of gratings, and can also be used to pick up small pieces of gravel stuck between grating slots during maintenance.

285

240

300

product catalog

Wheel-loads refer to the weight of the vehicle and its typical load depending on the type of the wheels. Pneumatic tyres spread the load like the test-block in the illustration and solid tyres post a greater point load, which is only recommended for Class E600 and F900. Vehicle movement, speed, braking and traffi c frequency are the consolidated consideration of dynamic loads.

LOADING SPECIFICATIONCompliant with BS EN 124:1994

Dynamic Load

Wheel Load

Vehicle Moving

Dynamic Effect

Static Load

Static Loads refers to load applied vertically to the grating with no other movement, such as load from a stationary vehicle.

This is classifi ed as in BS EN 124:1994 Test-loads Table:

Understanding Loads Affecting Grates:

Class Text-load KN Class Test-load KN

A15 15 D400 400B125 125 E600 600C250 250 F900 900

Selection Of Appropriate Load Class According To BS EN 124:1994

Group 1 – (Class A15) Group 4 – (Class D400)

Areas strictly for pedestrians and pedal cyclists. House drains, pool decks, courtyards, park-walkways and pedestrian compounds within precincts.

Carriageways of roads, hard-standing areas for fi re-engine access and parking areas for heavy vehicles. Generally for slow-moving vehicles not exceeding 11.5 tonnes in wheel-load.

Group 3 – (Class C250)

Used as curb-side grates in heavy vehicle parking areas and entrances of small precincts. Generally for slow-moving vehicles not exceeding 5 tonnes in wheel-load.

Group 2 – (Class B125)

Public footways and comparable areas, car porches and parks. Generally for slow-moving vehicles not exceeding 3 tonnes in wheel-load.

Group 5 – (Minimum Class E600)

Areas imposing high wheel-loads such as docks, airfi eld pavements and heavy forklift loadings. Generally for slow-moving vehicles not exceeding 20 tonnes in wheel-load.

Group 6 – (Minimum Class F900)

Areas imposing particularly high wheel-loads such as airport taxiway and vehicles with solid tyres.Generally for slow-moving vehicles exceeding 20 tonnes in wheel-load.

product catalog

Typical Installation of Light-Duty Gratings

Typical Installation of Heavy-Duty Gratings And Above

Installation Orientation

Install with Metal ‘L’ Fish Tail.

The Right Orientation For Gratings Installation The Incorrect Orientation For Gratings Installation

Install with Inverted or Fabricated ‘L’ metal to allow a 90° seating, which prevents breaking caused by ‘point seating’.

Point Seating effect occurs when the grate is not seated perpendicular to the ‘L’ section.

NOT RECOMMENDED FOR HEAVY DUTY APPLICATION

Install with Jonite L-Trimmer using Dry Fixing method by SealFix™ 103 (Epoxy Motar).

Mild-steel extruded ‘L’ section is not fl at on the inner side, thus reducing the seating area and weakening the grating during heavy application. A chamfered corner as seen may not overcome the situation. Alternatively, the Inverted or Fabricated ‘L’ metal allows a perpendicular seating of the grating.

NOTE: All channel grates including sump grates are designed and strengthened based on the transverse direction or the width of the grates.

Install directly on the fl at and level concrete or tiles.

Pedestrian Load

Vehicular Load

Vehicular Load

Vehicular Load

Extruded ‘L’

Inverted or Fabricated ‘L’

Pedestrian Load2 to 3mm gap

3 to 4mm gap 1.5 to 3mm gap

SealFix™ 103

2 to 3mm gap

Drain Width

Drain Width

Drain Width

Drain Width

Drain Width

Drain Width

Shoulder Height

Drain Shoulder

Drain Surface OpeningShoulder Width

INSTALLATIONusing the right methods

A15 (15KN)

B125 (125KN)

C250 (250KN)

210W x 500L x 25mm(t)

210W x 500L x 35mm(t)

210W x 500L x 35mm(t)

128 to 170mm C1-210H25LD

C1-210H35HD

C1-210H35EHD

292W x 500L x 25mm(t)210 to 242mmC2-292H25LD

355W x 500L x 25mm(t)273 to 305mmC3-355H25LD

4 kg

8.5 kg

12 kg

292W x 500L x 35mm(t)C2-292H35HD

292W x 500L x 35mm(t)C2-292H35EHD

8 kg

355W x 500L x 35mm(t)273 to 295mmC3-355H35HD15 kg

355W x 500L x 50mm(t)C3-355H50EHD25 kg

A15 (15KN)

B125 (125KN)

C250 (250KN)

A15 (15KN)

B125 (125KN)

C250 (250KN)

6 kg

10 kg

15 kg

C1

C2

C3

A15 (15KN) 125W x 500L x 25mm(t)75 to 100mm S1-125H25LD3 kg

6.5 kg 125W x 500L x 25mm(t)75 to 85mmS1-125H25HD B125 (125KN)

275W x 500L x 25mm(t)

275W x 500L x 35mm(t)

275W x 500L x 35mm(t)

140 to 225mm

140 to 215mm

140 to 205mm

CC1-275H25LD

CC1-275H35HD

CC1-275H35

CUSTOM-CUT GRATINGS

7 kg

12 kg

14 kg

A15 (15KN)

B125 (125KN)

C250 (250KN)

CC1 min. width: 180mm for LD & 210mm for HD & EHD

CC1

CC2

435W x 420L x 35mm(t)345 to 385mmC4-435H35LD10 kg

435W x 420L x 50mm(t)345 to 375mmC4-435H50HD23 kg

435W x 420L x 70mm(t)345 to 365mm C4-435H70EHD38 kg

A15 (15KN)

B125 (125KN)

C250 (250KN)

C4 HIGH PERFORMANCE GRATINGS

C250 (250KN) 167W x 750L x 35mm(t)100 to 117mm D1-167H35EHD*13 kg

17.5 kg 167W x 750L x 50mm(t)100 to 107mm D400 (400KN)D1-167H50CHD*

437W x 375L x 75mm(t)300 to 370mm D2-437H75 EHD*39 kg

D1

D2

D3

C250 (250KN)

ALL LOAD CLASSES ARE IN COMPLIANCE WITH EN124.1994

16.5 kg 260W x 500L x 50mm(t)200mm BW1-260H50EHD** C250 (250KN)

25 kg 400W x 500L x 50mm(t)330mm BW2-400H50EHD** C250 (250KN)BW1

BW2

D400 (400KN) 210W x 500L x 50mm(t)C1-210H50CHD17 kg

292W x 500L x 50mm(t)C2-292H50CHD24 kg D400 (400KN)

355W x 500L x 75mm(t)C3-355H75CHD43 kg

*D1 & D2 models are designed with narrow square slots of 9mm wide.**BW1 & BW2 models are designed with broad slots of 35mm wide. It has maximum water breaking efficiency.

D400 (400KN)

128 to 160mm

210 to 230mm

128 to 150mm

128 to 140mm

210 to 230mm

210 to 220mm

273 to 285mm

273 to 285mm

437W x 375L x 75mm(t)300 to 367mm D2-437H75 CHD*50 kg D400 (400KN)

43 kg 495W x 370L x 75mm(t)395 to 425mm D3-495H75EHD C250 (250KN)

43 kg 495W x 370L x 75mm(t)D3-495H75CHD D400 (400KN)395 to 425mm

GRATINGS:- Generally there are 5 types of standard widths that are able to cover openings from 75mm to 385mm. S1 is suitable for scupper drain indoors and outdoors, C1 to C3 are for most common house drains including car-porches. C4 is a new model that are use for wider drains such as parks, commercial and industrial surrounds.

HIGH PERFORMANCE GRATINGS:- This range of gratings is specially designed for heavy loading applications such as car-park entrances, hard-standing areas, driveways and kerb sides. L-Trimmers are strongly recommended to be used to ensure a flat and level seating of the gratings.

CUSTOM-CUT GRATINGS:- This range of gratings is specially designed for replacement purposes without any construction work on existing drains. The longitudinal side of the gratings has a wider edging so that the required width can be attained for the existing drain. The cutting of the grating must be pre-attained and factory cut.

LOAD CLASS ACTUAL GRATING SIZE MODEL DRAIN WIDTH PART NO. WEIGHT




32122

GENERAL SPECIFICATIONS LANDSCAPE DRIVEWAY

GRATINGS ALL LOAD CLASSES ARE IN COMPLIANCE WITH EN124.1994

330W x 500L x 35mm(t)

330W x 500L x 50mm(t)

All products are fully customizable in design and sizes if required. DESIGN SERVICES

31112

31113

32110

32111

31114

31115

32112

31116

31117

32114

31110

31111

S1

410W x 500L x 35mm(t)275 to 360mmCC3-410H35LD

33110

33111

33112

330W x 500L x 25mm(t)200 to 280mm

200 to 270mm

200 to 260mm

CC2-330H25LD

CC2-330H35HD

CC2-330H50EHD

33113

33114

33115

33116

33117

33118

410W x 500L x 35mm(t)275 to 350mmCC3-410H35HD

410W x 500L x 50mm(t)275 to 340mmCC3-410H50EHD

7.5 kg

16 kg

23 kg

A15 (15KN)

B125 (125KN)

C250 (250KN)

15 kg

22 kg

29 kg

A15 (15KN)

B125 (125KN)

C250 (250KN)



CC3

31118

31119

32116

32117

32118

32119

32123

32124

32113

32115

32120

32121

330W x 500L x 50mm(t)

Jonite reserves the right to change the designs or specifications without notice

EHD

DESIGN SERVICES

L-TRIMMER-70EHD/CHD 34124C

L-TRIMMER-50EHD/CHD

34113C

C1-Corner Grate Suitable for standard C1-210H25LD

Suitable for standard C1-210H35HD

Suitable for standard C1-210H35EHD

34110C

34111C

34112C

o90 C1-H25LDo90 C1-H35HDo90 C1-H35EHD

C1-Corner Grate

C1-Corner Grate

60W x 500L x 35mm(t)

ACTUAL GRATING SIZE MODEL PART N0.

3.5 kg

5 kg

6 kg

C2-Corner Grate Suitable for standard C2-293H25LD



34114C

34115C


C2-Corner Grate

C2-Corner Grate

7 kg

11 kg

13 kg

C3-Corner Grate34116C

34117C

34118C


C3-Corner Grate

C3-Corner Grate

10 kg

19 kg

28 kg

Suitable for standard C3-355H25LD



S1-Corner Grate34119C

34120C

o90 S1-H25LDo90 S1-H25HD S1-Corner Grate

Suitable for standard S1-125H25LD

Suitable for standard S1-125H25HD

1.7 kg

3 kg

L-TRIMMER-25LD

L-TRIMMER-35HD/EHD

34121C

34122C

34123C

1.5 kg

2 kg

3 kg

50W x 500L x 10mm(t)

50W x 500L x 15mm(t)

TS-50-LD (Tile-Strip)

TS-50-HD/EHD (Tile-Strip)

400W x 400L x 25mm(t)

500W x 500L x 25mm(t)

400W x 400L x 35mm(t)

500W x 500L x 35mm(t)

34127C

34128C

0.6 kg

0.8 kg

34129C

34130C

34131C

34132C

10 kg

12 kg

GT-400H25LD (Grate-Tile)

GT-500H25LD (Grate-Tile)

GT-400H35HD (Grate-Tile)

GT-500H35HD (Grate-Tile)

NOTE: Grate-Tiles that are Heavy Duty, Extra Heavy Duty & above must be pre-fabricated according to templates submitted by installers.

L-TRIMMER-75EHD/CHD 34125C

60W x 500L x 50mm(t)

65W x 500L x 65mm(t)

65W x 420L x 85mm(t)

65W x 500L x 90mm(t)

N.A.

N.A.

2 pcs/setT-HOOKS for LD & HD41110MA

MAINTENANCE & MISCELLANEOUS ACCESSORIES

DESCRIPTIONTYPEPART N0.

N.A.

PACKING

Mildsteel Welded Rod

2 pcs/setT-HOOKS for EHD & CHD41111MA

41112MA

41113MA

41114MA

41115MA

41116MA

N.A. Mildsteel Welded Rod

2 kg/set (gross wt.)REPAIR KIT for Standard Colours2 kg/set 2 parts epoxy putty

2 kg/set (gross wt.)REPAIR KIT for Custom Colours2 kg/set 2 parts epoxy putty

12 kg/set (gross wt.)SEALFIX ™ 103 12 kg/set 2 parts epoxy mortar

1 litre1 kg/litre Protective Stone SealerSHIELDFIX 108

1, 5 & 25 litresAlgae & Stain Remover1 kg/litre KLEANSOL 511

L-SLIM-TRIMMER-25LD/HD34126C 40W x 500L x 35mm(t)0.5 kg

WEIGHT

WEIGHT

TYPE

LANDSCAPE DRIVEWAY GENERAL SPECIFICATIONS

LD & HD GRATE-TILE

C1, C2 & C3 CORNER GRATE

S1 CORNER GRATELD, HD & EHDL-TRIMMER

LD & HD TILE-STRIP

COMPONENTS FOR GRATINGS

14 kg

16 kg

™

™


All products are fully customizable in design and sizes if required.


SSC350-700H50EHD 350W x 700L x 50mm(t)SSC357-357H50EHD 357W x 357L x 50mm(t)

SSC357-357H50CHD

517W x 432L x 50mm(t)

52111

52112

SSC517-432H50EHD52114

35 kg20 kg25 kg

38 kg

HIGH PERFORMANCE SUMP GRATES/ COVERS

C250 (250KN)280 x 630mm

D400 (400KN)

52110C250 (250KN)

357W x 357L x 50mm(t)

C250 (250KN)

517W x 432L x 75mm(t)SSC517-432H75CHD52115 53 kg D400 (400KN)

*SSC495-520H75EHD 495W x 520L x 75mm(t)C250 (250KN)52113 61 kg

*SSC495-520H75EHD is made up of 2 pieces of 495mmW x 2 60mmL x 75mm(t). By adding a section of the Standard Grating D3-495H75EHD, the complete set can be extended to 890mm or can be trimmed to other length as required. (request for drawing)

277 x 277mm

277 X 277mm

425 x 450mm

447 x 362mm

447 x 362mm

4 kg

TRIMMER FRAMES FOR SUMP GRATES/ COVERS

53110C53111C

535W x 235L x 75mm(t)SSC535-235H75CHD52116 53 kg D400 (400KN)465 x 165mm

TRF300-600H25 TRF300-600H35

TRF300-300H25 TRF300-300H35

TRF500-500H35TRF400-400H35

6 kg6 kg8 kg9 kg

10 kg

suitable for SC300-300H25LDsuitable for SC300-300H35HD

53112C53113C

suitable for SC300-600H25LDsuitable for SC300-600H35HD

53114C53115C

suitable for SC400-400H35LD / HDsuitable for SC500-500H35LD / HD

TRF357-357H50 9 kg53116C suitable for SC357-357H50HD / EHDTRF535-235H759 kg53117C suitable for SSC535-235H75CHD

L

W

(t)

STANDARD SQUARESUMP GRATE / COVER

INTERNAL PIT SIZE

precast drain channel

SUMP COVER WIDTH

INTERNAL PIT SIZE

ST

AN

DA

RD

TR

IMM

ER

FR

AM

E

MAXIMUM WIDTH OF PIT

SPLINE

CUSTOM SPLINEmade-to-order

ST

AN

DA

RD

re

cta

ng

ula

r S

UM

P G

RA

TE

/ C

OV

ER

usi

ng

sta

nd

ard

L-T

RIM

ME

RS

in

sev

era

l se

cti

on

s

CUSTOM SPLINES made to order for SUMP GRATES / COVERSOur Design Services is able to assist you in determining the appropriate spline according to the sustaining load as required by the Sump Grates/Covers.

MODEL: SC495-520H75EHD c/wpre-cut L-TRIMMERS in 2 sections

300W x 300L x 25mm(t)250 x 250mm 51110 4 kg

51111

SC300-600H25LDSC300-600H35HD

300W x 600L x 25mm(t)300W x 600L x 35mm(t)

SC335-510H35LDSC335-510H35HD

335W x 510L x 35mm(t)335W x 510L x 35mm(t)

SC340-1000H35LD

SC340-1000H35HD

340W x 1000L x 35mm(t)

340W x 1000L x 35mm(t)SC385-923H35LDSC385-923H35HD

385W x 923L x 35mm(t)385W x 923L x 35mm(t)

SC420-625H35LDSC420-625H35HD

420W x 625L x 35mm(t)420W x 625L x 35mm(t)

SC435-873H35LDSC435-873H35HD

435W x 873L x 35mm(t)435W x 873L x 35mm(t)

SC500-500H35LDSC500-500H35HD

500W x 500L x 35mm(t)500W x 500L x 35mm(t)

SC650-325H35LDSC650-325H50HD

650W x 325L x 35mm(t)650W x 325L x 50mm(t)

SC300-300H25LDSC300-300H35HD

SC400-400H35LDSC400-400H35HD

400W x 400L x 35mm(t)400W x 400L x 35mm(t)

5111251113

5111451115

5111851119

5112051121511225112351124

51125511265112751128511295113051131

SC550-550H35LDSC550-550H50HD

550W x 550L x 35mm(t)550W x 550L x 50mm(t)

5113251133

SC400-500H35LDSC400-500H35HD

400W x 500L x 35mm(t)400W x 500L x 35mm(t)

8 kg9 kg15kg12 kg18 kg

20 kg30 kg27 kg35 kg10 kg16 kg

19 kg26 kg 23 kg

25 kg28 kg42 kg

16 kg25 kg20 kg44 kg16 kg31 kg

A15 (15KN)

B125 (125KN) 300W x 300L x 35mm(t)

A15 (15KN)

B125 (125KN)

A15 (15KN)

B125 (125KN)

5111651117

A15 (15KN)

B125 (125KN)

A15 (15KN)

B125 (125KN)

A15 (15KN)

B125 (125KN)

A15 (15KN)

B125 (125KN)

A15 (15KN)

B125 (125KN)

A15 (15KN)

B125 (125KN)

A15 (15KN)

B125 (125KN)

A15 (15KN)

B125 (125KN)

A15 (15KN)

B125 (125KN)

230 x 230mm

250 x 550mm 240 x 540mm

285 x 460mm

295 x 450mm

290 x 950mm

280 x 940mm

335 x 873mm

325 x 863mm

350 x 350mm

340 x 340mm

350 x 450mm

340 x 440mm

370 x 575mm

360 x 565mm

385 x 823mm

450 x 450mm

440 x 440mm

500 x 500mm

490 x 490mm

600 x 275mm

590 x 265mm

MODEL PART N0. TYPE OF COMPONENTS WEIGHT

LANDSCAPE DRIVEWAY GENERAL SPECIFICATIONS



SUMP GRATES/ COVERS

LOAD CLASS ACTUAL GRATING SIZE MODEL PIT SIZE PART NO. WEIGHT

375 x 813mm

LOAD CLASS ACTUAL GRATING SIZE MODEL PIT SIZE PART NO. WEIGHT

NOTE: It is advisable to reconfirm the pit size of the sump prior to order.



300W x 380L x 25mm(t)250mm FLORAL-3006211062111

61114

LOAD CLASS ACTUAL GRATING SIZEMODEL DRAIN WIDTH PART N0. WEIGHT

4 kg 6KN

310W x 335L x 25mm(t)210 to 260mm LEAVES-3104 kg 5KN

292W x 335L x 25mm(t)220 to 250mm CRESTS-2924 .5kg 6KN

292W x 500L x 25mm(t)220 to 250mm6.5 kg 6KN



61113

61112

61111

61110

300W x 500L x 35mm(t)245 to 260mm BABY PEBBLES-3008 kg 6KN

210W x 500L x 25mm(t)160 to 170mm BABY PEBBLES-2105kg 6KN



MODERN COLLECTION

NATURE COLLECTION

AVANT-GARDE COLLECTION

PATTERN COLLECTION


62112 300W x 500L x 25mm(t)250mm FOREST-3005.5 kg 5KN

CREATIVE DESIGN GRATINGS:- This range of gratings are created with various floral or graphic designs that allows the gratings to blend in more aesthetically with different landscapes and architecture. The grates are limited to only pedestrian application.

LANDSCAPE GENERAL SPECIFICATIONS



250mm CROSS-STITCH-3006311063111

6.5 kg 6KN

160 to 170mm WAVELINE-2105.5 kg 6KN

63112 210W x 500L x 25mm(t)160 to 170mm SHREDDER5 kg 6KN

300W x 500L x 25mm(t)

210W x 500L x 25mm(t)

BABY PEBBLE 300

BABY PEBBLE 210BABY PEBBLE 150

CRESTS

FLORAL LEAVES FOREST

CHISELED RAIN STONE WEB TWISTER

ALL CREATIVE DESIGN GRATINGS ARE STRICTLY FOR PEDESTRIAN APPLICATION ONLY UNLESS SPECIFIED OTHERWISE

CREATIVE DESIGN GRATINGS

WAVELINECROSS-STITCH

SHREDDER SHREDDER-CUT

RAINING RAIN-SWING

63113 160 to 170mm SHREDDER CUT-2105 kg 6KN 210W x 500L x 25mm(t)

CUBOID

300W x 500L x 25mm(t)250mm6.5 kg 6KN

300W x 500L x 25mm(t)250mm

CHISELED-RAIN-292

STONE-WEB-292

TWISTER-300

RAINING-300

RAIN-SWING-3006 kg 6KN


63114 160 to 170mm CUBOID-2105 kg 6KN 210W x 500L x 25mm(t)

64110

64111

64112

64113

64114


6 KN 245W x 300L x 25mm(t)190 to 215mm BP245H2565110 3 kg

65111

65112

3.5 kg 300W x 300L x 25mm(t)240 to 270mm 6 KN

PGT-400H25LD

50mm *BLANK-ENDS for BP245H25



245W x 300L x 25mm(t)

300W x 300L x 25mm(t)

350W x 300L x 30mm(t)

POOL GRATE-TILE (regular)

400W x 400L x 25mm(t)

BE-BP245H25

67110C

67111C

67112C

69110C

69111C

69112C

69113C

67113C

67114C

67115C

3 kg o90-BP245H25

MODEL PART N0. TYPE OF COMPONENTS

3.5 kg o90-BP300H25

6 kg o90-BP350H30

10 kg

PGT-500H25LD

POOL GRATE-TILE (large)

500W x 500L x 25mm(t)12 kg

PGT-400H30LD

POOL GRATE-TILE (regular)

400W x 400L x 30mm(t)11 kg

PGT-500H30LD

POOL GRATE-TILE (large)

500W x 500L x 30mm(t)13 kg

4 kg

5 kg

7 kg

69114C

69115C

1.5kg

2 kg

60W x 300L x 35mm(t)

60W x 300L x 40mm(t)

LOAD CLASS MODEL PART N0.

6 KN 245W x 300L x 25mm(t)190 to 215mm CR245H2566110 3 kg

66111

66112

3.5 kg

50mm *BLANK-ENDS for CR245H25



245W x 300L x 25mm(t)300W x 300L x 25mm(t)

350W x 300L x 30mm(t)

CR Corner-Grate68110C

68111C

68112C

68113C

68114C68115C

3 kg o90-CR245H25

COMPONENTS FOR POOL GRATES

MODEL PART NO. TYPE OF COMPONENTS

3.5 kgo

90-CR300H25

6 kgo

90-CR350H30

4 kg

5 kg

7 kg

BP245H25

BP300H25

BP350H30

o 90 CORNERGRATEfor all sizes

Blank -Ends for all sizes

MODEL PART NO. TYPE OF COMPONENTS

6 9116C 1.6kg 60W x 300L x 35mm(t)

6 9117C 1.6kg 60W x 300L x 40mm(t)

POOL GRATESTUDS-TRIMMER

POOLGRATE-TILESfor Regularor Large size

CR245H25

CR300H25

CR350H30

o 90 CORNERGRATEfor all sizes

POOL GRATEL-TRIMMER

Blank -Ends for all sizes

WEIGHT

WEIGHT

WEIGHT

WEIGHT

LOAD CLASS ACTUAL GRATING SIZEMODEL DRAIN WIDTHPART N0. WEIGHT

he par s stipulated her y not necessarily run in or1. T t number e ma der.2. The surface texture of the pool grate is one grade smoother than gratings. 3. It is advisable to select lighter colours for pool grates due to white powdery deposits from chlorine in the pool unless non-chlorinated water is used.

NOTE:


POOL GRATESALL POOL GRATES ARE STRICTLY FOR PEDESTRIAN APPLICATION ONLY

BABY PEBBLE COLLECTION

CHISEL RAIN COLLECTION

BABY PEBBLE COMPONENTS

CHISELED RAIN COMPONENTS

ALL POOL GRATE COMPONENTS

5 kg

BP300H25

BP350H30 280 to 310mm 6 KN 350W x 300L x 30mm(t)

5 kg

CR300H25

CR350H30

240 to 270mm

280 to 310mm 6 KN

6 KN

300W x 300L x 25mm(t)

350W x 300L x 30mm(t)

BE-CR300H25

BE-CR350H30

4. *Blank-Ends are specially designed with 50mm more blank spacing on both sides of the grate for trimming during installation which will create a much neater appearance.


CR Corner-Grate

CR Corner-Grate

BE-BP300H25

BE-BP350H30

BE-CR245H25

BP Corner-Grate

BP Corner-Grate

BP Corner-Grate

L-TRIMMER 25-PG

L-TRIMMER 30-PG

STUDS-TRIMMER 25-PG

STUDS-TRIMMER 30-PG

Suitable for all Pool Grates of 25mm(t)




Suitable for CR245H25



Suitable for BP245H25



DRAIN WIDTH ACTUAL GRATING SIZE

ACTUAL GRATING SIZE

ACTUAL GRATING SIZE

ACTUAL GRATING SIZE

HINGED

PVC STRAINERLARGE

MODERN SLOTTED

(with Round cover)

FMAR-145/165

CLASSICROUND TRAP

*CLASSIC SHOWER TRAP


OVERALL DIMENSION

158W x 158L x 30mmH71110

71111

1.5 kg

TILE-UP TRAP(Square)

TILE-UP TRAP(Shower Square)

100W x 100L x 25mmH0.3 kg

MODERN AMERIC SQUARE

MODERN AMERIC ROUND

MODEL TYPE

*CLASSIC SQUARE TRAP

FTUS-148/158 Tile-up Trap (Square)

FTUS-90/100 Shower Tile-up Trap (Shower Square)

DRIVEWAY TRAP BLANK

72111

72112

72113

72114

72115

72110 2 kg

2.1 kg

200W x 200L x 30mmH

200W x 200L x 30mmH

2.3 kg 200W x 200L x 60mmH

1.2 kg

1.2 kg

1.3 kg

158W x 158L x 30mmH

158W x 158L x 30mmH

158W x 158L x 30mmH

*FHS-125/200 Hinged Trap (Large)

FHS-125/200 Blank

FHS-125/200 Dome Hinged Trap Dome (Large)

Hinged Trap Blank(Large)

*FHS-125/158 Hinged Trap (Square)

FHS-125/158 Blank Hinged Trap DomeFHS-125/158 Dome Hinged Trap Dome

HINGED COLLECTION (All square base)

MODEL TYPEPART NO.

73110

7311273111

165mm Dia. x 30mmH0.9 kg

0.25 kg

1 kg

100mm Dia. x 25mmH158W x 158L x 30mmH

*FCR90/100 Shower*FCSR-135/158

*FCR-145/165 Classic Round Trap

Classic Shower Trap(Round)

Classic Square Trap

CLASSIC COLLECTION

MODEL TYPE

200W x 200L x 45mmH75110

75111

FLOOR TRAPS FOR HEAVY DUTY / LIGHT VEHICULAR APPLICATION (not exceeding 3 tonnes wheel-loads):-

4 kg

5 kg 200W x 200L x 45mmH

74110

74111

158W x 158L x 30mmH1 kg

165mm Dia. x 30mmH0.9 kg

74112 165mm Dia. x 30mmH0.9 kg

76110A 98mm Diameter x 44mmHN.A.

FHS-158/200HD Driveway Trap (125KN)FHS-158/200HD Blank Driveway Trap Blank (125KN)

FMAS-135/158 Modern Americ Square

Modern Americ RoundFMSR-145/165 Modern Slotted

PVC STRAINER LARGE Suitable for 90mm outlet only

MODERN COLLECTION

ACCESSORIES

DRIVEWAY COLLECTION

MODEL TYPE

MODEL TYPE

MODEL TYPE

TRAP BLANK (Large)

HINGED TRAP DOME (Large)

HINGED TRAP(Large)

*HINGED TRAP

HINGED TRAPBLANK

HINGED TRAP DOME

LANDSCAPE DRIVEWAY GENERAL SPECIFICATIONS INTERIORS

FLOOR TRAPSALL FLOOR TRAPS ARE STRICTLY FOR PEDESTRIAN APPLICATION ONLY

TILE-UP COLLECTION

PVC STRAINERSMALL

76111A 78mm Diameter x 40mmHN.A. PVC STRAINER SMALL Suitable for 68mm outlet only

*Compliant with PSB standards

DRIVEWAY TRAP


WEIGHT

WEIGHT

WEIGHT

WEIGHT

WEIGHT

WEIGHT

OVERALL DIMENSION

OVERALL DIMENSION

OVERALL DIMENSION

OVERALL DIMENSION

OVERALL DIMENSION

PART NO.

PART NO.

PART NO.

PART NO.

PART NO.

BLOSSOM S1320

BLOSSOM R1800 BLOSSOM

S1800

FIREWORK S1100

FIREWORK S1200with REDUCER FIREWORK

S1500/600c/w Light Port Holes

FIREWORK R1500/600with REDUCER FIREWORK

COMBINATIONwith REDUCER

1800 x 1800 x 30mm(t)190 kg

1320 x 1320 x 30mm(t)96 kg

147 kg 1800mm Dia. x 30mm(t)500mm Dia.

500mm Dia.

500mm Dia.

BLOSSOM S1800

BLOSSOM S1320BLOSSOM R1800

The Firework Collection is one of the most popular patterns available. This collection has broad profile openings with design patterns resembling enchantingbursts of fireworks. The Port holes has an opening of 260mm diameter with an optional cover that can be fixed permanently to the panel if lighting fixtures arenot required. Optional reducers can also be used for the expandibility of the tree-wells.

1000 x 1000 x 30mm(t)47 kg FIREWORK S1000 545mm Dia.

1100 x 1100 x 30mm(t)55 kg FIREWORK S1100 600mm Dia.

59 kg 1200 x 1200 x 30mm(t)FIREWORK S1200 600mm Dia.

120 kg 600mm Dia.FIREWORK S1500/600(optional light port) 1500 x 1500 x 30mm(t)

80 kg 1100mm Dia.FIREWORK S1500/1100(optional light port) 1500 x 1500 x 30mm(t)91 kg 600mm Dia.FIREWORK R1500/600 1500mm Dia. x 30mm(t)

72 kg 1100mm Dia.FIREWORK R1500/1100 1500mm Dia. x 30mm(t)

154 kg 600mm Dia.FIREWORK S1800/600 1800 x 1800 x 30mm(t)

600mm Dia. x 30mm(t)9 kg 450mm Dia.

135 kg 750mm Dia.FIREWORK S1800/750 1800 x 1800 x 30mm(t)

140 kg 600mm Dia.FIREWORK R1800/600 1800mm Dia. x 30mm(t)130 kg 750mm Dia.FIREWORK R1800/750 1800mm Dia. x 30mm(t)

FIREWORK REDUCER R600(suitable for all Firework Models with 600mm Inner Well)

OVERALL DIMENSION INNER WELL MODEL WEIGHT

FIREWORK COLLECTION

BLOSSOM COLLECTION

Resembling the blooming of a flower, the Blossom Collection is simple and elegant with medium slot widths. The tree-well is not expandable and thecollection is limited to 3 sizes. It does not have any port holes and if a lighting fixture is required, they have to be surface mounted.

INNER WELL MODEL PART NO. WEIGHT

TREE GRATES

82112

82110

821114pcs

4pcs

4pcs


ALL TREE GRATES ARE STRICTLY FOR PEDESTRIAN APPLICATION ONLY

2pcs

81110 2pcs

81111 2pcs

81112 2pcs

81113 4pcs

81114 4pcs

81115 4pcs

81116 4pcs

81117 4pcs

81121C

81118 4pcs

81119 4pcs

81120 4pcs

PER SET

PER SET



PART NO.

OVERALL DIMENSION

CONCENTRIC S2000c/w Light Port Covers CONCENTRIC COMBOCONCENTRIC R800

1000

2000

8001800

WAGON WHEEL R1800 with REDUCER

FIREWHEEL R1000 in FIREWHEEL R2000PAVILION S1500



CONCENTRIC COLLECTION

The Concentric Collection is a modern and contemporary design with the smallest slot width of 6mm which is both heels and wheelchair friendly. It has the maximum expandibility of tree-wells. This collection has the most comprehensive combination of Square, Semi-Circle or Quarter Circle sections that allows many different formations. The port holes has an opening of 260mm diameter with an optional cover that can be fixed permanently to the panel if a lighting

84110 1500W x 1500L x 30mm(t)29 kg 703 x 675mm

The Pavillion Collection is a model that is inspired by timber plank flooring. A single size of 1500mm square with a rectangular tree-well. It has thin long slots of 7mm wide which can be considered heel-guard friendly.

PAVILLION COLLECTION

WHEEL COLLECTION

FIRE WHEEL:- This hypnotic design is a consolidated set of R2000 and R1000 tree grates. It has broad perforation for R2000 and medium perforation for R1000. Both set of tree grates can be used individually or as a combined set for a smaller tree-well.

WAGON WHEEL:- This unique wheel design is a single size tree grate of R1800 with an optional reducer of R500 for added aesthetic flair or futureexpandibility. It comes with 2 small port holes of 75mm diameter which is catered for specific lighting fixtures.

2000mm Dia. x 30mm(t)85111

85110140 kg 1000mm Dia.

1000mm Dia. x 30mm(t)50 kg 400mm Dia. 2pcs

85112 1800mm Dia. x 30mm(t)130 kg 800mm Dia. 4pcs

85113 800mm Dia. x 30mm(t)23 kg 500mm Dia. 2pcs

8pcs

4pcs

OVERALL DIMENSION INNER WELL PER SETMODEL PART NO. WEIGHT

1200 x 1200 x 30mm(t)

1000 x 1000 x 30mm(t)

800mm Dia. x 30mm(t)



2000 x 2000 x 30mm(t)


CONCENTRIC Combo SR2000(w/light port)

CONCENTRIC S1200CONCENTRIC Combo SR1000

CONCENTRIC S1000

CONCENTRIC R800

CONCENTRIC R1000

CONCENTRIC R2000 (w/light port)

CONCENTRIC Combo SR1200CONCENTRIC S2000

CONCENTRIC R1200

600mm Dia.

350mm Dia.

350mm Dia.

350mm Dia.

350mm Dia.

350mm Dia.

350mm Dia.

350mm Dia.

600mm Dia.

350mm Dia.

4pcs

2pcs

2pcs

2pcs

2pcs

2pcs

4pcs

2pcs

4pcs

2pcs

83122

83116

83115

83113

83111

83114

83121

83118

83119

83117

247 kg

103 kg

58 kg

68 kg

800 x 800 x 30mm(t)CONCENTRIC S800 350mm Dia. 2pcs83110 34 kg

29 kg

CONCENTRIC Combo SR800 350mm Dia. 2pcs83112 34 kg

48 kg

212 kg

88 kg

238 kg

73 kg

OVERALL DIMENSION INNER WELL PER SETMODEL WEIGHT


N.A.

N.A.

N.A.

N.A.

FIRE WHEEL R2000FIRE WHEEL R1000

WAGON WHEEL R1800WAGON WHEEL REDUCER R800

PAVILION S1500

fixture is not required.

2000 x 2000 x 30mm(t)CONCENTRIC S2000(w/light port) 350mm Dia. 4pcs83120 235 kg


PART NO.

PART NO.

CARRIAGE R1800

CARRIAGE R1200

BURNING-SUN R2000

BURNING-SUNR1200

BURNING-SUN S1500 (c/w Light Port Covers)

FANTASY S1800 FANTASY R1800


DESIGN SERVICES


86110 148 kg 1800 x 1800 x 30mm(t) 400mm Dia.

86111 165 kg 1800 x 1800 x 30mm(t) 650mm Dia.

86112 137 kg 1800mm Dia. x 30mm(t) 400mm Dia.

86113 125 kg 1800mm Dia. x 30mm(t) 650mm Dia.

FANTASY S1800/400

FANTASY S1800/650FANTASY R1800/400FANTASY R1800/650

The Fantasy Collection is a very exclusive set of designs with very broad and thin set of perforation profiles. This allows the installation of lighting fixtures beneath the tree grate without the need of port holes. The tree-well is expandable to the limit of its pattern.

4pcs

4pcs

4pcs

4pcs

The Burning Sun Collection takes its design after the symbol of the sun. Its S1500 model comes with 4 optional port hole covers. The R2000 model is a round tree grate with a huge tree-well in 8 identical sections.

BURNING SUN COLLECTION

2000mm Dia. x 30mm(t)87113 138 kg 1200mm Dia. 8pcs

1500 x 1500 x 30mm(t)87111 105 kg 450mm Dia. 4pcs

1500 x 1500 x 30mm(t)87112 99 kg 590mm Dia. 4pcs

1200mm Dia. x 30mm(t)87110 55 kg 400mm Dia. 2pcs

BURNING SUN R2000

BURNING SUN S1500/450BURNING SUN S1500/590

BURNING SUN R1200

CARRIAGE COLLECTION

The Carriage Collection is a highly expandable design that is very suitable for trees that grow very quickly. It has a simple and wide perforation profile and come in only two sizes; the R1200 & R1800.

1200mm Dia. x 30mm(t)46 kg 450mm Dia. 2pcs88110

1800mm Dia. x 30mm(t)140 kg 600mm Dia. 4pcs88111

CARRIAGE R1200CARRIAGE R1800

FANTASY COLLECTION





STAR CUT 1200

STAR CUT 600

4 Panels Formation 6 Panels Formation

TREE-RINGSQUARE MOSAIC500(panel grate)

STARGRATES4000

40002000

STARGRATER2000

700

STARGRATER1800

600

STARGRATER1500 c/w REDUCER

DESIGN SERVICES


89110 600W x 1200L x 30mm(t) N.A. 1pc

89111 600W x 600L x 30mm(t) N.A. 1pc STARCUT 1200STARCUT 600

The Starcut Collection, with graphical designs resembling stars, comes in the form of square and rectangular panels that allows many different configuration to attain different sizes. It is a cost effective solution for a custom tree grate. A supporting frame must be designed to sustain the loading required.


STARGRATE COLLECTION

4000W x 4000L x 30mm(t)N.A. STARGRATE S4000 2000mm Dia. 16pcs91115

2000mm Dia. x 30mm(t)91113 172 kg STARGRATE R2000/980 980mm Dia. 4pcs

2000mm Dia. x 30mm(t)91112 198 kg STARGRATE R2000/700 700mm Dia. 4pcs

1800mm Dia. x 30mm(t)140 kg STARGRATE R1800 600mm Dia. 4pcs91111

1500mm Dia. x 30mm(t)72 kg STARGRATE R1500 700mm Dia. 4pcs91110

700mm Dia. x 30mm(t)19 kg 400mm Dia. 2pcs91114C STARGRATE REDUCER 400(Suitable f or all STARGRATE Models with 700mm Inner Well)

This Stargrate Collection has designs expressing bursts of explosions resembling that of a star. This collection comes with medium sized slot widths and without port holes. The R2000 & R1800 tree-wells are designed to expand 40% of the design profile accordingly. The S4000 is a huge grate that make up of 16 sections forming a tree-well of 2000mm diameter. If required, R2000 can be combined with S4000 for a smaller tree-well.

STARCUT COLLECTION

INNER WELL PER SETMODEL PART NO. WEIGHT

INNER WELL PER SETMODEL WEIGHT

90110 500W x 500L x 30mm(t)15 kg N.A. 1pc SQUARE MOSAIC 500

The Square Mosaic Collection, a disorientation of different sizes of scattered mosaic brings out a chic and contemporary design. Its formation is very versatile for a tree grate with 500mm grid support. Similar to the Pebble Hole Collection, Tree-Rings can be used on various formations. (see pebble hole tree-rings)

SQUARE MOSAIC COLLECTION


35 kg

18 kg

PART NO.

PART NO.

OVERALL DIMENSION

OVERALL DIMENSION


PEBBLE-HOLES600/600 (panel grate)

PEBBLE-HOLES475/475 (panel grate)

PEBBLE-HOLES460/443(panel grate)

TREE-RING

PH-HORSE SHOES(200mm Dia. Port

Holes)

PH SQUARE 1000(panel grate)

PH SQ-LH 1000 PH SQ-RH 1000

PH SHACKLE-CURVE 750 PH SHACKLE 750A

PH SHACKLE 750


92121 1000W x 1000L x 30mm(t)54 kg 1pc

2pcs

6 kg

92115C 2400mm Dia. x 55mm(t)35 kg N.A.

92114C 700mm Dia. x 55mm(t)9 kg N.A.TREE-RING R600(650mm Cut Out Dia.)

92113C 500mm Dia. x 55mm(t) N.A.TREE-RING R400(450mm Cut Out Dia.)

92111 475W x 475L x 30mm(t)12 kg N.A. 1pc PEBBLE-HOLE 475/475 (panel grate)

92110 460W x 443L x 30mm(t)11 kg N.A. 1pc PEBBLE-HOLE 460/443(panel grate)

92112 600W x 600L x 30mm(t)19 kg N.A. 1pc PEBBLE-HOLE 600/600 (panel gr ate)

SMALL TREE GRATE PANELS (Using multiple small Tree Grate Panels, various sizes of formation can be achieved. Tree-wells can be allocated anywhere within the panels)

LARGE TREE GRATE FORMATION

N.A.

92122 1000W x 1000L x 30mm(t)38 kg 1pc1200mm Dia. (full formation)

92123 38 kg 1pc1000W x 1000L x 30mm(t) 1200mm Dia. (full formation)

92124 750W x 750L x 30mm(t)17 kg 1pc800mm Dia. (full formation)

92125 750W x 750L x 30mm(t)22 kg 1pc

92126 750W x 750L x 30mm(t)24 kg 1pc

PH SQUARE 1000(panel grate)

PH SQ-LH 1000(w/ light port 200mm Dia.)

PH SQ-RH 1000(w/ light por t 200mm Dia.)

PH SHACKLE-CURVE 750PH SHACKLE 750A(w/ light port 200mm Dia.)

PH SHACKLE 750(w/o light port hole)

92116 1000mm Dia. 30mm(t) 450mm Dia. 2pcs

92118 1500mm Dia. x 30mm(t) 800mm Dia. 4pcs

34 kg

REGULAR TREE GRATE FORMATION

92119 1600W x 1600L x 30mm(t) 800mm Dia. 4pcs 108 kg

92120 2250W x 1500L x 30mm(t) 800 x 1550mm100 kg

92117 1200W x 1200L x 30mm(t)70 kg 450mm Dia. 4pcs

PH-HORSE SHOES (c/w light port 200mm Dia.)

PEBBLE-HOLE R1000

PEBBLE-HOLE R1500(c/w light port 200mm Dia.)

PEBBLE-HOLE S1600(c/w light por t 200mm Dia.)

PEBBLE-HOLE S1200

LANDSCAPEGENERAL SPECIFICATIONS

TREE-RING R2300(2350mm Cut Out Dia.)

60kg

PEBBLE-HOLER1000 PEBBLE-HOLE

S1200 PEBBLE-HOLER1500(200mm Dia. Port Holes)

PEBBLE-HOLES1600 (200mm Dia. Port Holes)

8 Panels SHACKLE Formation (3000mm x 1500mm)

4 Panels SHACKLE Formation (1500mm x 1500mm) or (1500mm Dia.)

10 Panels Formation (5000mm x 2000mm)

4 Panels Formation (2000mm x 2000mm)

PEBBLE HOLE COLLECTION

The Pebble Hole Collection is a huge collection of many different panels of shapes and sizes to form many different formations of various shapes and sizesas required. Some Pebble Hole designs come with light port holes as well. Expandability is however limited due to the design of random holes.




800mm Dia. (full formation)

800mm Dia. (full formation)

8pcs

2pcs

2pcs


1500



93110 4000mm Dia. x 30mm(t) 2400mm Dia.CENTRICAL R4000 (Curve Panel Grates)

The Centrical Collection is a simple and modern design comprising of 16 pieces of small curve grates forming a huge tree-well of 4000mm diameter or3200mm diameter with a tree-well of 2400mm diameter. The tree-well is expandables as required according to the design profile constraint. Its slotwidth is a mere 12mm and can be easily assembled. Within the tree-well of 2400mm diameter various diameters of inserts or reducers can be achievedvia customisation.

2000mm Dia. x 30mm(t)144 kg 600mm Dia.94110

3000mm Dia. x 30mm(t)208 kg 2000mm Dia.94111

FALLEN LEAVES R2000FALLEN LEAVES R3000

The Fallen Leaves Collection comes in 2 circular radii, R3000 & R2000. This design has medium width slots without por t hole. The R2000 has a tree-well of 600mm standard comprises of 8 panels. The R3000 is a bigger tree grate that comprises of 8 bigger panels forming a tree-well of 2000mm diameter. A dazzling, complete formation can also be achieved by combining the R2000 into R3000 as shown.

300

0

200

0

FALLEN LEAVES R2000 inFALLEN LEAVES R3000

CENTRICAL R4000

40

00

2400

FALLEN LEAVES COLLECTION

16pcs

8pcs

8pcs

All tree-grates require supporting frames except tree-grates that comein 2 sections and are 1200mm or less in size. These are optional andcome separately for each individual model.

2000

200

0

1200mm Dia 860mm

Dia.

3000

150

0

HOT DIP GALVANIZED METAL SUPPORT FRAMETHE PEBBLE HOLE COLLECTION

Pebble Hole panel grates can be used as tree grates for huge existing trees which are off-centre from common tree-grates formation. The metal support frame below can be adjusted together with the panel grates to accommodate any position of the tree-well.

NOTE:-Metal support frame - All tree grates that exceed 2 sections/panels and or above the size of 1200mm in size should be incorporated with metal supports. (metal support isoptional/excluded and is separately specified.)

CENTRICAL COLLECTION

INNER WELL PER SETMODEL PART NO. WEIGHT


93111 3200mm Dia. x 30mm(t) 2400mm Dia.CENTRICAL R3200 (Curve Panel Grates) 16pcs

860mm

Dia.

560

THREAD-BALLR1500

THREAD-BALL COLLECTION

The Thread-Ball Collection comes in 4 curved sections and creatively formed into a playful thread-ball design that is suitable for all contemporary theme.

1500mm Dia. x 30mm(t)82 kg 560mm x 560mm 95110 THREAD-BALL R1500 4pcs

INNER WELL PER SETMODEL WEIGHT


260 kg

208 kg

PART NO.

PART NO. OVERALL DIMENSION

OVERALL DIMENSION


LANDSCAPE GENERAL SPECIFICATIONS LANDSCAPELANDSCAPEINTERIORS

TOILET GRATES:- This range of grates were specially created for mass usage in heavy populated malls and public areas. With its rounded curvedprofiles, liquids can be easily flushed away from the surface. This prevents liquids from stagnating on the surface of the grates as well as easy cleaning and maintenance.

P

TOILET GRATESALL TOILET GRATINGS ARE STRICTLY FOR PEDESTRIAN APPLICATION ONLY UNLESS SPECIFIED OTHERWISE

159mm to 164mm169mm to 174mm

209mm to 214mm

259mm to 264mm

TGS - 200 TGS - 250 TGS - 300

A15A15

A15A15

4.8 kg

5 kg

6 kg

7 kg

12110

12111

12112

12113


179mm to 184mm

209mm to 214mm


A15A15

A15A15A156KN

4 kg

5 kg

5.3 kg

6 kg

6.6 kg

7.5 kg

11110

11111

11112

11113

11114

11115

COMPONENTS FOR TOILET GRATES

P

A15A15

SUITABLE FOR TGS - 200

SUITABLE FOR TGS - 210159mm to 164mm169mm to 174mm

14110

14111

2.9 kg

3 kg

214mm A15 SUITABLE FOR TGW - 250SUITABLE FOR TGW - 500


13110

13111

7.6 kg

12.5 kg

250W x 500L x 25mm(t)

300W x 500L x 25mm(t)

210W x 500L x 25mm(t)

SLOTTED COLLECTION

WAVELINE COLLECTION

WAVELINE COLLECTION COMPONENTS

SLOTTED COLLECTION COMPONENTS

TGS - 200TGS - 210TGS - 250TGS - 300

TGW - 185TGW - 210

TGW - 220TGW - 250TGW - 275TGW - 500

o90 TGS - 200o90 TGS - 210

o90 TGW - 250o90 TGW - 500

TGS - 210

o90 TGS - 200

PP

o90 TGS - 210

PP

o90 TGW - 250

PP

o90 TGW - 500

PP

PART NO.

PART NO.

TGW - 220

TGW - 500

TGW - 185

TGW - 250 TGW - 275

TGW - 210


WEIGHT MODEL DRAIN WIDTH LOAD CLASS

PART NO.

PART NO.

SS 210

BR 300

1150L x 823W x 780mmHBR 300 - 2 SEATERS21110

21111

ACTUAL BENCH SIZEMODEL PART N0. WEIGHT

140 kg

1700L x 823W x 780mmHBR 300 - 3 SEATERS190 kg

BR SERIES

BANCO COLLECTION

1150L x 638W x 447mmHSS 210- 2 SEATERS21112

21113

ACTUAL BENCH SIZEMODEL PART NO. WEIGHT

125 kg

1700L x 638W x 447mmHSS 210 - 3 SEATERS168 kg

SS SERIES

The Banco Collection created using contemporary, ergonomic and versatile designs of structure elements such as pedestals and panelsusing various creative components. Customizable with unlimited colours, patterns & textures.



BENCHES

LANDSCAPEINTERIORS

Jonite reserves the right to change the designs or specifications without noticeNote: 1. All Banco Collection come without installation & assembly. All components are in knockdown system.

2. All Banco Collection are either mounted permanently by authorised installer or assembled free standing by incorporating stainless steel stands which comes separately.

product catalog

COMPLIANCE

AND STANDARDS

The ‘USGBC Member Logo’ is a trademark owned by the U.S. Green Building Council and is used by permission. The logo signifi es only that Jonite Private Limited is a USGBC member; USGBC does not review, certify, or endorse the products or services offered by its members.

022-016Eco-Friendly Building Material

‘LEED’ and related logo is a trademark owned by the U.S. Green Building Council and is used by permission.

ISO 9001:2008 / FS 73051

BS EN 124:1994Gully tops and manhole tops for vehicular and pedestrian areas. Design requirements, type testing, marking, quality control

This European Standard applies to gully tops and manhole tops with a clear opening up to and including 1000 mm, for installation within areas subjected to pedestrian and/or vehicular traffi c.

www.jonite.com

Copyright© Copyright Reserved 2010. The materials, drawings and the design shown here are the exclusive property of Jonite Pte Ltd. It shall not be copied nor its contents communicated or reproduced in any form and for any purpose without the prior specifi c authority in writing of Jonite Pte Ltd.

DisclaimerAll reasonable care has been taken in compiling the information in this catalogue.All recommendations and suggestions on the use of Jonite products are made without guarantee since the conditions of use are beyond the control of the Company. It is the customer’s responsibility to ensure that each product is fi t for its intended purpose and that the actual conditions of use are suitable and appropriate.

This catalogue and any advice provided by Jonite Pte Ltd are free of change and accordingly, no liability of any kind (including liability for negligence) will attach to the Company or its agents arising out of or in connection with or in relation to this catalogue or any such advice. Any goods supplied by the Company will be supplied solely upon its standard conditions of sale, copies of which are available on request.

The company’s policy of continuous product development and improvements renders specifi cations liable to modifi cation. Information provided in this catalogue is therefore subject to change without prior notifi cation.

product catalog

product catalogue - caddetails · as all pool grates are suitable for light-duty pedestrian...

Documents