product and services guide · iso-9001:2008 certification today's quality creates our future...

Guardian Telecom’s ATEX approved series of speakers were designed for use both indoors and outdoors within ATEX certified hazardous areas.

G U A R D I A N T E L E C O M

Product and Services Guide

ATEX - IEC Certified Ringers & Loudspeakers

S E C T I O N

w w w.guardiante le com.comISO-9001:2008 Certification Today's Quality Creates Our Future

23

PSG

-8.2

.3D

Guardian Telecom's Product and Services Guide Catalogue is a compilation of individual Category Sections. They include an in-depth selection of Product Data Sheets from our extensive product lines including Analog and VoIP Telephones, Page/Talk, Cable, Talk/Back, PA/GA equipment, Acoustic Booths, Loudspeakers & Ringers and Accessories at the date of publication.

Based on a policy of continuous improvement, Guardian is constantly evaluating and redesigning existing models, adding new features and introducing new products to the benefit of our customers. Additional information can be found on our website at www.guardiantelecom.com.

Visit industrial sites around the world and you can find telephones and communication systems designed, manufactured, distributed and commissioned by Guardian Telecom. From certified and ruggedized telephone and paging endpoints, to loudspeakers & ringers, cable, accessories, acoustic booths and much more. Our product line is extensive and our knowledge in-depth.

Guardian manufactures and assembles at our modern, ISO certified, CSA, UL and ATEX approved facility located east of the Canadian Rockies in Calgary, Alberta, Canada.

Working closely with our customers has always been a cornerstone in our work ethic. It keeps us up to date on their evolving needs and requirements as they operate in a demanding and uncompromising industrial world.

Guardian Telecom has completed its initial VoIP telephone product launch. As the IP world continues to evolve and grow, we will continue to invest both time and resources in design and testing to meet the stringent requirements that clients demand.

The in-house channel-partner sales and technical teams are here to work directly with you or through our network of distributors and representatives, locally, nationally and globally. Take advantage of their practical experience and product knowledge to make informed decisions based on your communication needs, environmental factors, regulatory requirements, budget considerations, growth and scheduling.

From individual telephone units to complete systems, our focus on customers’ distinct needs is also addressed by customizing products whenever practical. From features to colors, finishes to labels, graphics, parts, enclosures and more.

Guardian can help guide you through the product selection process no matter how complex it is. We invite you to contact us to discuss your needs and see if our products & services will be the right fit.

Toll free (North America) 1 800 363-8010 Tel 403 258-3100 Fax 403 253-4967 E-mail [email protected]

23-i

Guardian Telecom Product and Services Guide www.guardiantelecom.com PSG-8.2.3D

ATEX-IEC Rated Ringers & Loudspeakers

P-HS-15 EExmN(T) Manufactured by DNH, the GHS-15 EExmN(T) speaker is a robust heavy duty aluminum horn speaker. Renowned for high reliability and superb efficiency. Suitable for all industrial environments and public areas.

P-HS-15 EExIIN(T)Manufactured by DNH the GHS-15EExIIN(T) satisfies the requirements for flame-proof loudspeakers for Zone 2 environments. Modified from existing models to suit marine and industrial installations.

P-BExCS110-05 & P-BExDCS110-05 Manufactured by E2S the flameproof P-BExCS110-05 combination alarm sounders and Xenon beacons are suitable for Zone 1 & Zone 2 applications. The P-BExDCS110-05 versions are also suitable for Zone 21 & 22.

23-3

23-1

23-5

Guardian Telecom manufactures, supplies and distributes a wide selection of Explosion Proof, Hazardous Area, ATEX-IEC and General Area Ringers and Loudspeakers from leading manufacturers around the world to meet the unique demands of Industrial Communication projects.

The Guardian Telecom website, www.guardiantelecom.com and catalogues present a selection of popular industrial grade Ringers or Loudspeakers and we have access to many more.

To discuss your present or future needs contact a Guardian Telecom representative at 403 258-300 (1-800-363-8010 in NA) or by e-mail at [email protected].

Guardian Telecom Product and Services Guide — ATEX-IEC Ringers & Loudspeakers www.guardiantelecom.com

23-ii

23-iii


M20 EExe ATEX approved cable gland

Cable dia. 0.3-0.5”(8-13mm)

ø 6.

5” (1

63m

m)

9.8” (247mm)1.2”

(30mm)ø 0.28” (7mm)

Circuit DiagramTransformer

Low Impedance

White

WhiteBlack

Yellow

Red

Blue

Green

Red Yellow 15.0 W Red Yellow 4.0 WRed Green 10.0 W Red Green 2.6 WRed Blue 7.5 W Red Blue 2.0 W

8 ohm version available

Primary nominal tappings 100 VFrom loudspeaker

White to BlackFrom loudspeaker

White to White

Guardian Telecom Inc. Calgary, Alberta, Canada Phone: 403 258-3100 Toll Free (North America) : 1-800 363-8010 Facsimile: 403 253-4967 [email protected] www.guardiantelecom.com

Industrial Speakers

Guardian Telecom is proud to be a supplier of the full line of DNH loudspeakers. Since 1946 DNH has been a leading manufacturer of one of the world’s largest high quality range of loudspeakers for industrial and commercial applications. For off the shelf stock items to tailored products, contact a Guardian sales representative to discuss your specific project needs and the equipment that will meet your demands.

The Manufacturer reserves the right to alter specifications without notice.

ISO 9001 Certifiedwww.guardiantelecom.comIndustrial Telephones • Equipment • Systems


P-H

S15E

Exm

NT_

Ref.

Rev.

05.

03 2

013

GT_

1409

19

Bracket and all outside nuts and bolts in stainless steel.

Installation, Operation and Maintenance Procedures

• Unscrew lid, lead cable through cable gland and connect to terminal according required power. • If the Ex-loudspeaker is to be earthed, it must be done correctly using the specially marked screws. • Tighten cable gland and screw lid back on with 2-3 Nm to assure IP grade. • Fasten the bracket with 3 screws and ensure to use all washers in the

intended position. (To isolate the main body from the bracket).• To change the position of the loudspeaker adjust the bracket by

loosening / tightening the screws as required. • Use only certified/specified cable glands and blanking plugs. • The aluminum surface of the loudspeaker should be regularly treated

with paint at the same interval as with other similar outdoor equipment.• For optimum performance, always use the correct voltage / power

and operate within the frequency limits as stated. • Do not open loudspeaker when energized. • This loudspeaker is supplied with a 2 year warranty against defective workmanship.

Specifications

Material / Color Aluminium alloy / RAL 7031Mounting BracketTermination e-chamber, screw terminalsWeight 6.2 lbs (2.8 kg)IP-rating (UL Equivalent) 67 Max. / min. ambient temperature 140°F / -58°F (60°C / -50°C)Rated / max. power 15W / 15 W SPL 1W/1m 105 dB (IIB), 101 dB (IIC) SPL rated power 116 dB (11B), 113 dB(11C) Effective freq. range 410 – 7000 Hz (11B), 420 – 7000 Hz (11C) Dispersion (-6dB) 1kHz / 4kHz 140° / 40° (11B), 105° / 35° (11C) Options Impedances, colors, labels

Certified by / Certification code / Number: NEMKO / EEx de IIB+H2 T5 / 98 ATEX 201 ll 2 GD Certified by / Certification code / Number: NEMKO / EEx de IIC T5 / 98 ATEX 201

P-HS-15 EExmN(T)EX and non Ex Cert ATEX

110

100

90

80

70

60

50

dBSPL SPL vs Freq

20 Hz 50 100 200 500 1K 2K 5K 10K 20K

Sound pressure levels at 1W/1m IIB version

23-1


Industrial Speakers

Guardian Telecom is proud to be a supplier of the full line of DNH loudspeakers. Since 1946 DNH has been a leading manufacturer of one of the world’s largest high quality range of loudspeakers for industrial and commercial applications. For off the shelf stock items to tailored products, contact a Guardian sales representative to discuss your specific project needs and the equipment that will meet your demands.


ISO 9001 Certifiedwww.guardiantelecom.comIndustrial Telephones • Equipment • Systems


Bracket and all outside nuts and bolts in stainless steel.

EExe M20Cable diameter

.03-.05” (8-13mm)

ø 6.

5” (1

63m

m)

9.8” (247mm)1.2”

(30mm)ø 0.28” (7mm)


P-H

S15E

ExllN

T_Re

f. Re

v. 2

5.04

201

3 G

T 14

0919

Installation, Operation and Maintenance Procedures

• Fasten the bracket to wall with 1-3 screws and ensure to use all washers in the same position that the loudspeaker is delivered with. (To isolate the main body from the bracket)

• To change the position of the loudspeaker adjust the bracket (by loosening / tightening the screws) as required. • For optimum performance, always use the correct voltage / power and operate within the frequency limits as stated. • Use only certified/specified cable glands and blanking plugs reflecting

the same specifications as the rest of the loudspeaker with respect to IP rating and environmental temperature. (ATEX approved)

• Warning: Do not open loudspeaker when energized. • The aluminum surface of the loudspeaker should be regularly treated

with paint at the same interval as with other similar outdoor equipment.• If the loudspeaker is to be earthed, this must be done correctly to

avoid galvanic corrosion. • Fasten lid with a torque of 2 - 3 Nm to assure the IP rating. • This loudspeaker is supplied with a 2 year warranty against defective

materials and workmanship.

Specifications

Material / Color Aluminum alloy / RAL 7035Mounting BracketTermination e-chamber, screw terminalsWeight 6.0 lbs (2.7 kg)IP-rating (UL Equivalent) 67 Max. / min. ambient temperature 122°F / -58°F (50°C / -50°C)Rated / max. power 15 W / 15 W SPL 1W/1m 107 dB SPL rated power 118 dB Effective freq. range 370 – 7000 Hz Dispersion (-6dB) 1kHz / 4kHz 150° / 40° Options Impedance, color, label

Certified by / Certification code / Number: NEMKO / ll 3 G Ex nA II Gc / 10ATEX1056 -50°C ≤ Ta +50°C

White Green 70 VWhite Red 100 V

70/100 volt combined transformer Primary connections:

1 : 4 15.0 W 1 : 2 4.5 W1 : 3 8.0 W 3 : 4 2.5 W2 : 4 5.0 W 2: 3 1.0 W

8 ohm version available

Secondary nominal tappings:

2 Yellow

1 Red

4 Blue

3 Green

7 Green

5 White

8 Red

Circuit Diagram

P-HS-15 EExllN(T)EX and non Ex Cert ATEX Zone 2 Areas

110

100

90

80

70

60

50

dBSPL SPL vs Freq

20 Hz 50 100 200 500 1K 2K 5K 10K 20K

Sound pressure levels at 1W/1m sine wave

23-3

Industrial Speakers

Formed in 1992, E2S, European Safety Systems specializes in the design, development and manufacture of high performance electronic sounders, intelligent voice annunciators and flash alarms for industrial, heavy duty, marine and hazardous environments. For off the shelf stock items to tailored products, contact a Guardian sales representative to discuss your specific project needs and the equipment that will meet your demands.www.guardiantelecom.com

Industrial Telephones • Equipment • Systems

14.5” [368.00 mm]

Ø 7.13” [Ø 181.00 mm]

6.5” [165.00 mm]

5.7”

[1

45.0

0 m

m]

3 holes Ø 0.2755” [Ø 7.00 mm]

Flameproof P-BExCS110-05 combination alarm sounders and Xenon beacons are suitable for Zone 1 & Zone 2 applications. P-BExDCS110-05 versions are also suitable for Zone 21 & 22.

Sound level outputs are up to 117dB(A) at 3.28’ (1 m) with a choice of 32 alarm tones and 3 remotely selectable stages. Sounder & Beacon may be connected from a single supply for simultaneous operation or from separate supplies for independent operation.

Approvals

• ATEX certificate: KEMA 01ATEX2223X, EN 60079-0 : 2006, EN 60079-1 : 2007, EN 61241-0 : 2006, EN 61241-1 : 2004 • IECEx certificate: IECEx KEM 10.0025, IEC 60079-0 : 2004 (Ed4), IEC 60079-1 : 2007 (Ed6), IEC 61241-0 : 2004 (Ed1), IEC 61241-1 : 2004 (Ed1)• GOST-R certificate: POCC GB.JB05.B02205

Features

• Automatic synchronization on multi-beacon & sounder systems.

• Beacons can be set to ‘flip-flop’ alternating mode with other units on multi-beacon systems.

• Xenon tubes mechanically secured against shock & vibration

• Ratchet adjustable stainless steel ‘U’ bracket.• ‘Programmable’ version available:

- 45 alarm tones- 4 remotely selectable stages- Any tone can be assigned to any stage- User configurable continuous frequency tone

P-BExCS110-05 & P-BExDCS110-05

Bottom View Back View

GOST-R

P-BExCS110-05 P-BExDCS110-05

Alarm Sounders & Beacons

Metal & ABS

23-5

OEM note: No liability is accepted for any consequence of the use of this document. The technical specification of this unit is subject to change without notice due to our policy of continual product development. All dimensions are approximate. This unit is sold subject to our standard conditions of sale, a copy of which is available on request.


Industrial Speakers

Formed in 1992, E2S, European Safety Systems specializes in the design, development and manufacture of high performance electronic sounders, intelligent voice annunciators and flash alarms for industrial, heavy duty, marine and hazardous environments. For off the shelf stock items to tailored products, contact a Guardian sales representative to discuss your specific project needs and the equipment that will meet your demands.www.guardiantelecom.com

Industrial Telephones • Equipment • Systems

BExC

S/D

C11

0-05

Rev

. E2S

Dat

ashe

et 1

.7.1

v10

a G

T_14

0919

SpecificationsSounder/HornMaximum output 117dB(A) @ 1 metreNominal output 110dB(A) @ 1m +/- 3dB - Tone 2No. of tones 32 (UKOOA / PFEER compliant)No. of stages 3Volume control Max. 110dB(A); Min. 72dB(A) - Tone 2Effective range 100m @ 1KHzVoltages DC 12vdc; 24vdc; 48vdcVoltages AC 115vac; 230vacStage switching Negative or positive

BeaconEnergy 5 Joules (5Ws)Flash rate 1Hz (60 fpm) Peak Candela 34,812 cdEffective Intensity cd: 105 cd*Lens colors Amber, Blue, Clear, Green, Red &

YellowTube life Emissions are reduced to 70% after 8

million flashesGeneralIngress protection IP66 & IP67Housing material Marine grade copper free LM6

AluminumHousing finish Phosphated & powder coatedP-BExCS110-05 flare High impact UL94 V0 & 5VA FR ABS

(Red)P-BExDCS110-05 flare Anti-Static High impact ABS (Black)Cable entries Dual M20 ISO (one stopping plug

included)Terminals 0.5 to 4.0 mm² cablesLine monitoring Min. 500 Ohm 2w, or 3k3 Ohm 0.5w

res or diode (dc versions)Weight DC: 4.80kg AC: 5.00kg

Stage 1 Frequency Description dB @ 1m* Stage 3 Stage 3Tone 1 1000 Hz Continuous - PFEER Toxic Gas 110.0dB(A) @ 1m Tone 31 Tone 11Tone 2 800/1000Hz @ 0.25 sec Alternating 110.0dB(A) @ 1m Tone 17 Tone 5Tone 3 500/1200Hz @ 0.3Hz 0.5 sec Slow Whoop 110.5dB(A) @ 1m Tone 2 Tone 5Tone 4 800/1000Hz @ 1Hz Sweeping 110.0dB(A) @ 1m Tone 6 Tone 5Tone 5 2400Hz Continuous 109.0dB(A) @ 1m Tone 3 Tone 27Tone 6 2400/2900Hz @ 7Hz Sweeping 109.0dB(A) @ 1m Tone 7 Tone 5Tone 7 2400/2900Hz @ 1Hz Sweeping 110.0dB(A) @ 1m Tone 10 Tone 5Tone 8 500/1200/500Hz @ 0.3Hz Sweeping 110.5dB(A) @ 1m Tone 2 Tone 5Tone 9 1200/500Hz @ 1Hz - DIN / PFEER P.T.A.P. 110.5dB(A) @ 1m Tone 15 Tone 2 Tone 10 2400/2900Hz @ 2Hz Alternating 109.0dB(A) @ 1m Tone 7 Tone 5 Tone 11 1000Hz @ 0.5Hz Intermittent 110.0dB(A) @ 1m Tone 31 Tone 1 Tone 12 800/1000Hz @ 0.875Hz Alternating 110.0dB(A) @ 1m Tone 4 Tone 5 Tone 13 2400Hz @ 1Hz Intermittent 109.0dB(A) @ 1m Tone 15 Tone 5 Tone 14 800Hz 0.25sec on, 1 sec off Intermittent 103.0dB(A) @ 1m Tone 4 Tone 5Tone 15 800Hz Continuous 103.0dB(A) @ 1m Tone 2 Tone 5Tone 16 660Hz 150mS on, 150mS off Intermittent 104.0dB(A) @ 1m Tone 18 Tone 5Tone 17 544Hz (100mS)/440Hz (400mS) - NF S 32-001 107.0dB(A) @ 1m Tone 2 Tone 27Tone 18 660Hz 1.8sec on, 1.8sec off Intermittent 105.0dB(A) @ 1m Tone 2 Tone 5Tone 19 1.4KHz-1.6KHz 1s, 1.6KHz-1.4KHz 0.5s -NFC48-265 117.0dB(A) @ 1m Tone 2 Tone 5 Tone 20 660Hz Continuous 104.0dB(A) @ 1m Tone 2 Tone 5 Tone 21 554Hz/440Hz @ 1Hz Alternating 107.0dB(A) @ 1m Tone 2 Tone 5 Tone 22 544Hz @ 0.875 sec. Intermittent 107.0dB(A) @ 1m Tone 2 Tone 5 Tone 23 800Hz @ 2Hz Intermittent 103.0dB(A) @ 1m Tone 6 Tone 5 Tone 24 800/1000Hz @ 50Hz Sweeping 107.0dB(A) @ 1m Tone 29 Tone 5 Tone 25 2400/2900Hz @ 50Hz Sweeping 109.0dB(A) @ 1m Tone 29 Tone 5 Tone 26 Bell 117.0dB(A) @ 1m Tone 2 Tone 1Tone 27 554Hz Continuous 107.0dB(A) @ 1m Tone 26 Tone 5 Tone 28 440Hz Continuous 104.0dB(A) @ 1m Tone 2 Tone 5Tone 29 800/1000Hz @ 7Hz Sweeping 106.0dB(A) @ 1m Tone 7 Tone 5Tone 30 AS2220: 420Hz repeating 0.625 sec on, 0.625 sec off. 104.0dB(A) @ 1m Tone 32 Tone 5Tone 31 660/1200Hz @ 1Hz Sweeping 110.5dB(A) @ 1m Tone 11 Tone 1Tone 32 AS2220: 500-1200Hz 3.75s on 0.25s off (15 cycles/min) 110.5dB(A) @ 1m Tone 26 Tone 1

Effective Candela lens color factorAmber Blue Clear Green Red Yellow

0.51 0.12 1.00 0.49 0.15 0.86

Current ConsumptionAlarm Sounder Xenon Beacon

Version: Voltage range Current: Voltage range Current:

12V dc +/ -25% 195mA 10-14V 750mA 24V dc +/ -25% 265mA 20-28V 300mA 48V dc +/ -25% 130mA 42-54V 180mA 115V ac 50/60Hz +/ -10% 110mA +/ -10% 140mA 230V ac 50/60Hz +/ -10% 56mA +/ -10% 55mA

ORDERING INFORMATION Part Code Classification

P-BExCS11005D** ATEX / IECEx II 2G Ex d IIB T4 Ta. -50° to +70° C

GOST-R 1ExdIIBT4 Ta. -50° to +55° C

P-BExDCS11005D** ATEX / IECEx:II 2G Ex d IIB T4 Ta. –50°C to. +70°CII 2D Ex tD A21 IP67 T115°Cbased on max Ta. of +70°C

GOST-R 1ExdIIBT4 Ta. -50° to +55° C DIP A21 Ta T5

** = Voltage reference:Options: 12DC, 24DC, 48DC, 115AC, 230AC Add’-P’ to part number for Programmable Version

23-6

Sections Guardian Telecom’s Product and Services Guide Catalogue is a compilation of individual Category Section Publications

Page/TalkExplosion Proof 13

Stations 14

System Cable 15

System Components 16

Page Station Module ReplacementsPage/Party® Module Replacements 1

17

Page/Talk Module Replacements

17

Talk/Back Explosion Proof Amplifier

18

Multi-Channel Amplifiers

18

PA/GASystem Components 19

Acoustic BoothsAluminum & GRP 20

Loudspeakers/RingersExplosion Proof 21

Hazardous Area 22

ATEX-IEC 23

General Area 24

Guardian represents DNH, E2S, Federal Signal, MEDC and TOA, and has access to an extensive range of other world class leading manufacturers. Visit www.guardiantelecom.com for additional information on Explosion Proof, Hazardous Area, ATEX-IEC and General Area Loudspeakers & Ringers.

Accessories & EnclosuresTelephone Accessories & Enclosures

25

Page/Talk Accessories 26

Product IndexPart No., Description, Product Section & Product Data Sheet 27

Guardian 1

About Guardian TelecomBuilding on a Legacy of Design and Service•Communications: Easy, Reliable and Safe•More Choices, Selections and Services•Standard Features•Options & Accessories •Product and Project Consultation•Commissioning Services•Sound Studies•Training•Maintenance, Cleaning, Trouble Shooting & Refurbishment•Custom Design•Page/Talk, Telephone, PA/GA and Talk/Back Systems •Standards and Classifications•

Knowledge Base Glossary

ProductsAnalog Telephones

Explosion Proof 2

ATEX-IEC 3

Hazardous Area 4

Outdoor Industrial 5

Indoor Industrial 6

Emergency/Help Point 7

Correctional 8

VoIP TelephonesHazardous Area VoIP

9

Outdoor Industrial VoIP

10

Indoor Industrial VoIP

11

Emergency/ Help Point VoIP

12

1 Page/Party® is a registered trademark of GAI-Tronics Inc. Use does not imply endorsement.

Guardian Telecom Product and Services Guide — Table of Contents www.guardiantelecom.com PSG-8.2.3D

Calgary, Alberta, CanadaTelephone: 403 258-3100 Facsimile: 403 253-49671-800-363-8010 (North America)[email protected]

Canada USA Middle East

All content including the "Guardian Telecom" logo, images, graphics and descriptions are not to be used without the expressed written authorization of Guardian Telecom Inc., Calgary, Alberta, Canada. All other names and logos are the trademarks or registered trademarks of their respective companies.

Guardian pursues a policy of continuous improvement, therefore product, content and specifications are subject to change without notice. Design, specifications and release dates are subject to change without notice.


product and services guide · iso-9001:2008 certification today's quality creates our future...

Documents