prodex total insulation
TRANSCRIPT
The Ideal Insulation Solution
Our products:
NEW
PRODEX AD5 THERMALINSULATION
PRODEX AD10 THERMALINSULATION
PRODEX TOTAL INSULATION
Product Characteristics:
PRODEX TOTAL INSULATION
Environmental Characteristics:
Re�ects 97% of the radiant heatRepels the heat in warm climateRetains heat in cold areasAllows obtaining energetic saving up to 55%with the use of air-conditioningReduces noise from the falling rainProduct of 100% close cell what allows to be:impermeable, hygienic, and resistant toagro-chemicals, acids, bases, oils and coverings
Our products are free from toxic gasWe do not harm the ozone layerAll product are environmental frendlyDo no develop allegiesWe are members of the united green building CouncilOur packing is made with
The Ideal Insulation Solution
PRODEX AD5 THERMALINSULATION
PRODEX AD10 THERMALINSULATION
Increse R Value, add longitudinal strength, get better installation �nish with our new thermal meld system.
Increse R Value, add longitudinal strength, get better installation �nish with our new thermal meld system.
Radiant barrier, Thermalbreak and Vapor BarrierRadiant barrier, Thermalbreak and Vapor Barrier
This insulation product reduces heating and cooling costs. Re�ective aluminum foil on each side of a 5mm closed-cell polyethylene foam center. Ideal for hot and cold climates.
This insulation product reduces heating and cooling costs. Re�ective aluminum foil on each side of a 10mm closed-cell polyethylene foam center. Ideal for hot and cold climates.
10 mm
AD10
5 mm
AD5
Nominal Thickness:5mm (+ or – 0.5 mm)
Nominal Thickness:10mm (+ or – 0.5 mm)
INSULATION LAYERSAluminium Foil
polyethylene backing Closed-cell Polyethylene foam
polyethylene backing Aluminium Foil
INSULATION LAYERSAluminium Foil
polyethylene backing Closed-cell Polyethylene foam
polyethylene backing Aluminium Foil
NEW
The Ideal Insulation Solution
PRODEX AD5 THERMAL INSULATION
INSULATOR AD (double aluminium face - barrier against �re)
3. CHARACTERISTICS OF THE PRODUCTCHARACTERISTICS
STRUCTURE OF THE FOAM CELLAVERAGE WEICHT OF M2DENSITY OF THE INSULATORPERMEABILITYPERMEABILITY TO THE WATER STEAMFLAME RATESMOKE DEVELOPMENTEMITTANCERESISTANCE TO FUNGUSDELAMINATIONOPERATION TEMPERATURETHERMIC RESISTANCE (factor R, hent �or down)BARK ADHESION (fast action)TOTAL THICKNESS OF FAST ACTIONADHESION CAPACITY (fast action)INITIAL STICKING LENGHT (fast action)
Closed0,242kg/m²20-30 kg/m3Impermeable0.033 g/m2hkPa - 0.05 perms (gr/ft²*h*in.hg)0150.03Resistant / Does not promote the growth of fungus – moldDoes not delaminate- 20ºc / 80ºc 15.67 ft2h°f/Btu1,33-1,31 kg/inch0,095 mm24 hr/in²1,5 cm>
Closed0,242kg/m²20-30 kg/m3Impermeable0.033 g/m2hkPa - 0.05 perms (gr/ft²*h*in.hg)0150.03Resistant / Does not promote the growth of fungus – moldDoes not delaminate- 20ºc / 80ºc 21.36 ft2h°f/Btu1,33-1,31 kg/inch0,095 mm24 hr/in²1,5 cm>
- - ASTM 1622 Dir. UEAtc ASTM E 96/IRAM 1735 ASTM E-84 ASTM E-84 ASTM C-1371-98 ASTM C 1338 ASTM C-1224-99 ASTM C-1258 ASTM C-236ASTM D-1000ASTM D-1000PSTC-7PSTC-6
1-PRODUCT
2. MEASUREMENTS AND TOLERANCES OF THE STANDARD PRODUCT
VALUE NORM
THICKNESS 5 ± 0.35 (mm) WIDTH: 1.22 ± 0.01 (m)LENGHT ± 30 cm
Technical speci�cations
PRODEX AD10 THERMAL INSULATION
INSULATOR AD (double aluminium face - barrier against �re)
3. CHARACTERISTICS OF THE PRODUCTCHARACTERISTICS
STRUCTURE OF THE FOAM CELLAVERAGE WEICHT OF M2DENSITY OF THE INSULATORPERMEABILITYPERMEABILITY TO THE WATER STEAMFLAME RATESMOKE DEVELOPMENTEMITTANCERESISTANCE TO FUNGUSDELAMINATIONOPERATION TEMPERATURETHERMIC RESISTANCE (factor R, hent �or down)BARK ADHESION (fast action)TOTAL THICKNESS OF FAST ACTIONADHESION CAPACITY (fast action)INITIAL STICKING LENGHT (fast action)
- - ASTM 1622 Dir. UEAtc ASTM E 96/IRAM 1735 ASTM E-84 ASTM E-84 ASTM C-1371-98 ASTM C 1338 ASTM C-1224-99 ASTM C-1258 ASTM C-236ASTM D-1000ASTM D-1000PSTC-7PSTC-6
1-PRODUCT
2. MEASUREMENTS AND TOLERANCES OF THE STANDARD PRODUCT
VALUE NORM
THICKNESS 10 ± 0.70 (mm) WIDTH: 1.22 ± 0.01 (m)LENGHT ± 30 cm
Technical speci�cations
The Ideal Insulation Solution
Our re�ective insulations are used in:
Homes, Metal buildings, Pole barns Commercial buildings
Applications include:
Prodex Total is the recommended product for these applications. It represents 81% of our sales, receives the highest customer reviews and most stringent testing.
Prodex Total is the recommended product for these applications. It represents 81% of our sales, receives the highest customer reviews and most stringent testing.
RoofAtticCeilingWallGarageCrawlspaceFloorDuctworkUnder-concrete...
The Ideal Insulation Solution
MAIN ADDED VALUES
BEST METAL BUILDING INSULATION!
Improve the tearing resistanceGet a constant R ValueReduce condensation riskThermal weld overlap
1.THERMAL WELDING METHOD2.VAPOR BARRIER 3.ONE LAYER R VALUES AT DIFERENT TEMPERATURES4.RESISTANCE TO GROWD OF FUNGI
The AD10 insulation is our higher quality product,It allows you to get the best installation look
The AD10 insulation is our higher quality product,It allows you to get the best installation look
PRODEX AD10 THERMAL INSULATION NEW
The Ideal Insulation Solution
1.Thermal Welding Method
Prodex AD 10 material has cuts at the edge to overlap the rolls, a hot air gun is apply this melts the polyethylene foam at both rolls, then a little hand pressure is require to complete the welding process. Thermal welding allows Prodex AD 10 to get a totally impermeable overlapping and mechanical seal between installed rolls
The Ideal Insulation Solution
1.Thermal Welding Method
Prodex AD 10 material has cuts at the edge to overlap the rolls, a hot air gun is apply this melts the polyethylene foam at both rolls, then a little hand pressure is require to complete the welding process. Thermal welding allows Prodex AD 10 to get a totally impermeable overlapping and mechanical seal between installed rolls
The Ideal Insulation Solution
3. One layer R Values at diferent temperatures
R value AD 10 Air chamber (in) Foam thickness (mm) Foam R value ft2 h°F/Btu
Rafter tem (˚F) ft2 h °F/Btu 3.5 10 1.7600176
-25 25.5600176
0 24.5100176
25 23.1100176
50 22.4100176
75 21.3600176
100 20.6600176
125 19.9600176
The Ideal Insulation Solution
4. Resistance to growd of fungi
Asperillus nigerAspergillus �avus.Aspergillus versicolor.Penicillium funiculosum.Chaetomium globosum.
Prodex re�ective insulation has been tested for resistance to the growd of fungi in accordance with the ASTM C 1338.
Against all the followin fungal spices:
The Ideal Insulation Solution
InstallationABOVE RAFTERS INSTALLATION
Set the Prodex AD 10 at the eaves and unroll parallel to the eaves.As the Prodex AD 10 is unrolled across rafters �xit using nails or staples of at least ½ “ length.The next roll must overlap the preceding layer by using our Thermal welding system this will guide the roll and seal the overlap along the entire length.
Prodex Ad 10 should be permanently �xed in place by using wooden battens parallel to the rafters, held in place with nails.When the top layer has been battened, any excess material may be cut by running a sharp knife along the edge of the batten.As soon the Prodex AD 10 is set and tight, roof installation can take place as a normal procedure.
The Ideal Insulation Solution
PRODEX AD10 THERMAL INSULATION NEW
INSTALLATION METHOD R 22
INSTALLATION METHOD R 30
Air chamber #1
Air chamber #2So�t
Ad10
Ad10Roof cover
Battens
AD10
Rafter
Roof coverBattens
Air chamber2.6”
The Ideal Insulation Solution
PRODEX AD10 THERMAL INSULATION NEW
PRODEX TOTAL INSULATION
The Ideal Insulation Solution
U.S
.GREEN BUILDING CO
UN
CIL
U S G B C
Best InsulationLowest PriceFastest Delivery
ENVIROMENTAL MANAGEMENT SYSTEMS CERTIFICATION