prodblad hiflex eng

2
® floor on a higher level HiFlex Floor – a revolutionary new raised floor! The high built raised floor system HiFlex™ provide you as an end user more time to decide which electrical equipment vendor to choose. HiFlex™ is the alternative to concrete floors with cable cellars where wrongly positioned cable cut-outs can delay the project and increase cost. Advantages: simplifies installations due to high tolerance of the floor leveling changes possible even if choice of equipment is delayed built in flexibility at future expansions fire rated steel structure and non-combustible floor board is an option

Upload: cokiaa

Post on 21-Dec-2015

225 views

Category:

Documents


0 download

DESCRIPTION

Bergvik sistemi

TRANSCRIPT

®

floor on a higher level

HiFlex Floor™

– a revolutionary new raised floor!The high built raised floor system HiFlex™ provide you as an end user more time to decide which

electrical equipment vendor to choose. HiFlex™ is the alternative to concrete floors with cable cellars

where wrongly positioned cable cut-outs can delay the project and increase cost.

Advantages:

• simplifies installations due to high tolerance of the floor leveling

• changes possible even if choice of equipment is delayed

• built in flexibility at future expansions

• fire rated steel structure and non-combustible floor board is an option

®

floor on a higher level

Technical data HiFlex Floor™

Floor system in generalGross weight: about 80 kg/m2 with floor board Alt. 1.

Distributed load: 5–15 kN/m2 (10 kN/m2 as a standard at L/300).

Finished floor height: Up to 3500 mm.

Specification steel structure Pedestal supports: 60 x 60 mm.

Primary section: 160 x80 mm.

Secondary section: 80 x 40 mm.

Fire rating: Fulfils R30 to R60 by fire rated paint treatment.

Specification floor boards

ALLT 1: NON-COMBUSTIBLE FLOOR BOARD

Material: 32 mm fiber reinforced calcium sulfate with tongue and groove.

Covering measurements: 600 x 1200 mm.

Surface finish: We recommend a finish of 2,5 mm linoleum.

Weight: 55 kg per m2.

Fire rating: Non-combustible according to EN 13501-1.

ALT 2: FAST FLOOR DIRECT LAMINATED FLOOR BOARD

Material: 38 mm moist resistant particle board with tounge and groove.

Covering measurement: 585 x 2440 mm.

Surface finish: Bergvik Laminate.

Decor/color: M335 Granite as standard.

Wear resistance: 4000-6000 cycles acc. to EN 438-2:6 1991.

Impact load resistance: Fulfills requirements acc. to DIN 68751.

Color fastness: >6 acc. to EN 438-2:16 1991.

Weight: 30 kg per m2.

Fire rating: Difficult to ignite acc. to test report 0080.

fors

lund

.se

Bergvik Flooring ABBox 46 Vannsätter, 820 23 Bergvik, SwedenTel: +46-270-42 48 40, +46-8-34 75 55. Fax: +46-270-42 42 [email protected], www.bergvik.com

Cable penetration seals of various types,type Roxtec is available as an option.

Floor boards with tongue and groove in different formats and material is screweddown to the structure. Available in difficultto ignite or non-combustible materials.

The flexible design of the floor structure (Lx, Ly, Lz) allows for optional loading.

Stepless cable ladder bracket is mounted on the

pedestals and is available for all cable ladder

widths. Special attachment for standard ladder

brackets type MP-bolagen is offered as an option.

Lz

LyLx