proctor passive wraptite sa - proctor group australia · proctor passive wraptite-sa is a...
TRANSCRIPT
Introduction
Proctor Passive Wraptite-SA combines the best properties of a
vapour permeable membrane and a self adhesive water and air
barrier in one innovative self-adhering product.
Product Description
Proctor Passive Wraptite SA fully bonds without mechanical
attachments to most substrates for ease of installation, requiring
minimal use of sealants or tapes.
Proctor Passive Wraptite-SA utilizes a patented full coverage air
permeable adhesive to provide unsurpassed vapour
permeability in a commercial quality, self-adhered, water
resistant breather membrane.
Wraptite SA’s high vapour permeability allows damp sheathing
to dry quickly and moisture to escape. This ensures good indoor
air quality and reduces the likelihood of mould, mildew,
condensation, timber distortion and metal corrosion.
Key Features & Advantages
No primer required on most clean substrates.
Tough laminate resists punctures and tears.
Lightweight and easy to install.
Multiple substrate compatibility.
UV stable for up to six weeks of UV exposure in Australia
and New Zealand.
Wide service temperature range, easily installed in all
climates.
Tear, rip and puncture resistant during and after
construction, reducing install costs.
Zero VOCs, and free of any chemicals on the Living
Building Challenge Red List.
AS/NZS 4200.1 testing and compliance
Tested in accordance with ICC-ES-AC 38 criteria to meet
IBC and IRC requirements for Weather Resistive Barriers.
Multiple Substrate Compatibility
Proctor Passive Wraptite SA
Page 1 of 2 ProctorPassive Wraptite SA PDS 02/18
Exterior Gypsum Sheathing Aluminium (painted or mill finish) OSB
Most rigid insulation Cast-in place concrete Rigid vinyl
Pre-painted steel Galvanized metal Precast concrete
Steel Concrete block Plywood
Hydrophobic outer layer repels
liquid water.
Airtight core prevents air leakage
and convective heat transfer
Vapour permeable structure
releases moisture from building
envelope
Unique vapour permeable
adhesive coating for simple and
robust installation
Properties Test Method Test Result
Nominal Thickness Calibrated deadweight micrometre 0.65mm
Weight (excludes release liner) Electronic weight scale 240 g/m² (±10g/m²)
Installation Temperature - -6˚C to 60˚C
Service Temperature - -40˚C to 100˚C
Water Resistance AS/NZS 4201.4 Pass (Water Barrier)
AATCC-127 PASS 55.88cm head of water - 5 hrs
EN 1928 - before and after ageing W1
Air Permeance EN 12114
ASTM 2178
0.01 m³/m².h @ 50Pa
0.000134 L/s/m2 @ 75 Pa
Water Vapour Permeance ASTM E96 - Method B 4.1μg/N.s
Water Vapour Resistance ASTM E96 - Method B 0.243MNs/g
Peel Adhesion ASTM D3330 >0.26N/mm
Dimensional Stability EN 1107-2 MD: -0.34% CD: +0.02%
Resistance to Dry Delamination AS/NZS 4201. 1 Pass
Resistance to Wet Delamination AS/NZS 4201. 2 Pass
Flammability Index AS1530.2* 1 (low)
Reaction to Fire EN 11925-2
BS EN 13501-1
Class B, s1, d0⁺
Duty Classification Table 1 AS/NZS 4200.1 Light
Tensile Strength AS 1301.448 MD: 7.9 kN/m CD: 4.5 kN/m
Edge Tear Resistance TAPPI T470 MD: 379N CD: 225N
Tear Resistance EN 12310-1 MD: 412N CD: 286N
Flexibility at Low Temperature EN 1109 No cracks at –40˚C
Proctor Passive Wraptite SA
Page 2 of 2 ProctorPassive Wraptite SA PDS 02/18
* Tested with release liner removed and adhered to 3mm plywood.
+ Tested over 12mm Calcium Silicate Board as per BS EN 13238:2010
Proctor Passive Wraptite-SA is a multilayer laminate product and is not therefore suitable for testing to AS1530.1. Please note that Proctor Passive
Wraptite-SA is a polyolefin material and therefore does not meet the deemed to satisfy requirements in the National Construction Code (NCC) as a
non-combustible material. Wraptite SA has been assessed by BRE Global with regards to the impact on the fire performance of external wall systems
when expose to an external fire. Please consult your fire engineer if you wish you use Proctor Passive Wraptite-SA as part of a performance solution, for
example in type A , type B wall constructions and fire-protected timber.
Width Length m2 per roll Weight per roll
(including packaging)
1500mm 50m 75m² 24kg