C 1504 E A

Licensed by EBARA Corp.

PROCESS PUMPSingle Stage, End Suction, Foot Supported

Model IFS

HHYYOOSSUUNNGG EEBBAARRAA

2

RRaattiinnggss

FFeeaattuurreess

AApppplliiccaattiioonnss

PROCESS PUMPSingle Stage, End Suction, Foot Supported

Model

IFS

Capacities To 24㎥/min (3700USGPM)Heads To 140m (470 ft)Discharge pressures To 16kgf/㎠G (230 PSIG) ｛1.57MPa｝Max·allowable suction pressures To 9kgf/㎠G (130 PSIG) ｛0.88 MPa｝Hydrostatic test pressures To 24kgf/㎠G (340 PSIG) ｛2.3MPa｝Speed 50㎐ 1450 or 2950 min-1

60㎐ 1750 or 3550 mim-1Max·allowable revolution To 3600 min-1Rotation Clockwise viewed from inboard sideImpeller type Enclosed

Stainless steel: -50℃ to 200℃ (-58℃F To 392℃F)Temperatures Cast steel: -5℃ to 200℃ (-23℃F to 392℃F)

Cast iron: -15℃ to 150℃ (-5℃F to 300℃F)Flanges Stainless steel: ANSI 150

Cast lron: ANSI 125Nozzles End-TopStuffing box Suitable for conventional packing ＆ mechanical seal

••CChheemmiiccaall iinndduussttrryy••PPeettrroolleeuumm RReeffiinneerriieess••TThhee PPeettrroocchheemmiiccaall iinndduussttrryy••OOtthheerr VVaarriioouuss iinndduussttrriieess

HYOSUNG EBARAPROCESS PUMP MODEL.IFS of single stage, end suction,foot supported, horizontal typehave been widely used in chemicalindustry, petroleum refineries,the petrochemical industry and

other various industries for longyears. Many improvementshave been recently made onthis pump to enhance its per-formance. 〃The money saver〃Our modern mass productionfacilities enable us to pass the

cost-savings on to you. Uniquedesign of this high performancepump is provided with stainlesssteel, cast steel casing or castiron for superior and extendedlow-cost operation

•• Foot support and heavy duty design•• Back pull-out casing.•• Full compliance with ISO 2858 specifications.•• All components have been designed for maximum parts interchangeability.•• Flexibility of design handles wide range of liquids.•• All sizes stocked for fast shipment.•• Low NPSH performance.

R

3

WWiiddee--RRaannggee ffoorr BBeesstt CChhooiiccee！！！！AAvvaaiillaabbiilliittyy iinn mmoodduulleess pprroovviiddeess ccoommpplleettee iinntteerrcchhaannggeeaabbiilliittyy ooffccoommppoonneennttss bbeettwweeeenn ddiiffffeerreenntt ttyyppeess aanndd ppeerrmmiittss ppuummpp sseelleeccttiioonnssbbeesstt ssuuiitteedd ffoorr tthhee ggiivveenn ssppeecciiffiiccaattiioonnss..

*For 100 × 80-3215, the shaft system and gland cover system inter-changeable. The two-dot chain line is retained for the shaft system.

SSeelleeccttiioonn CChhaarrtt

4

SSeelleeccttiioonn CChhaarrtt

5

CCoonnssttrruuccttiioonn

PPaarrtt LLiisstt BBeeaarriinngg CCaassiinngg wwiitthh CCoooolliinngg JJaacckkeett

6

Sectional Drawingof Standard Type(Cast Iron)

note: Combinations of parts in materials other than listed above are alsoavailable upon request. Note: Bearing Casing with Cooling jacket is available for any cast iron,

stainless steel and cast steel pump. Sectional Drawing of StandardType (Stainless steel, Cast steel).

001 Casing FC250 FCD-S 1016 Mechanical seal cover SUS420J1 SUS420J1 1018 Gland cover FC250 FCD-S 1021 lmpeller FC200 FC200 1031 Shaft S35C S35C 1039-1 lmpeller key S50C S50C 1039-2 Coupling key S50C S50C 1041 Packing sleeve SUS420J1 SUS420J1 1042 Mechanical seal sleeve SUS316 SUS316 1048 lmpeller nut S30C S30C 1051 Bearing casing FC200 FC200 1053-1 Bearing cover FC200 FC200 2053-2 Bearing adjusting cover FC200 FC200 1056-1 Deep-groove ball bearing - - 2056-2 Combined angular-contact ball bearing - - 1070 Shim C2801P C2801P 4090 Lantern ring SUS304 SUS302 1091 Packing gland FC150 FC150 1093 Flinger SUS304 SUS304 1095 Stay SS400 SS400 1111 Mechanical seal - - 1114 Oil seal SPHC/NBR SPHC/NBR 2117-1 Casing gasket #1501 #1501 1117-2 Shaft sleeve gasket #1501/#1501AC #1501/#1501AC 1117-3 Bearing cover gasket OIL SHEET OIL SHEET 1119 Gland packing p#406 p#406 5120-1 Casing set bolt SS400/SUS403 SS400/SUS403 1SET120-2 Mechanical seal cover bolt SUS403 SUS403 4122 Eye bolt S20C S20C 1124 Packing set bolt SUS403 SUS403 2255 Oil level gauge synthetic rubber/Glass synthetic rubber/Glass 1274-1 Wedge ring SK5 SK5 1274-2 Wedge ring SK5 SK5 1285 Air vent Polycarbonate Polycarbonate 1

No. Name of part Cast iron Ductile cast ironMaterial

Quantity

CCoonnssttrruuccttiioonn

7

SSttuuffffiinngg BBooxx wwiitthh CCoooolliinngg JJaacckkeett PPaarrtt LLiisstt

Sectional Drawingof Standard Type(Stainless steel, Cast steel)

Note: Stuffing Box with Cooling jacket is available forstainless steel and cast steel pumps only.

Note: Combinations of parts in materials other thanlisted above are also available upon request.

001 Casing SCS14 SCS13 SCS13 1016 Mechanical seal cover SUS316 SUS304 SUS420J1 1018-1 Gland cover(Ⅰ) SCS14 SCS14 SC480 1018-2 Gland cover(Ⅱ) FCD400 FCD400 FCD400 1021 lmpeller SCS14 SCS13 FC200 1031 Shaft SUS316 SUS304 S35C 1039-1 lmpeller key SUS316 SUS316 S50C 1039-2 Coupling key S50C S50C S50C 1041 Packing sleeve SUS316 SUS304 SUS420J1 1042 Mechanical seal sleeve SUS316 SUS304 SUS316 1048 lmpeller nut SUS316 SUS304 S30C 1051 Bearing casing FC200 FC200 FC200 1053-1 Bearing cover FC200 FC200 FC200 1053-2 Bearing adjusting cover FC200 FC200 FC200 1056-1 Deep-groove ball bearing - - - 1056-2 Combined angular-contact ball bearing- - - - 1066 Water-cooling cover FC200 FC200 FC200 1070 Shim C2801P C2801P C2801P 1090 Lantern ring SUS304 SUS316 SUS304 1091 Packing gland SCS14 SCS13 FC150 1093 Flinger SUS316 SUS304 SUS316 1095 Stay SS400 SS400 SS400 1111 Mechanical seal - - - 1114 Oil seal SPHC/NBR SPHC/NBR SPHC/NBR 2115-1 Adjusting cover oil seal O-ring NBR NBR NBR 1115-2 Mechanrical seal cover O-ring Teflon Teflon Teflon 1115-3 Gland cover O-ring NBR NBR NBR 1115-4 Gland cover O-ring NBR NBR NBR 1117-1 Casing gasket - - - 1117-2 Shaft sleeve gasket - - - 1117-3 Bearing cover gasket OIL SHEET OIL SHEET OIL SHEET 1117-4 Water-cooling cover gasket NBR NBR NBR 1119 Gland packing p#406 p#406 p#406 1120-1 Clasing set bolt SUS403 SUS403 SUS403 1SET120-2 Mechanical seal cover bolt SUS403 SUS403 SUS403 4122 Eye bolt S20C S20C S20C 1124 Packing set bolt SUS403 SUS403 SUS403 1set255 Oil level gauge synthetic rubber/Glass synthetic rubber/Glass synthetic rubber/Glass 1274-1 Wedge ring SK5 SK5 SK5 1274-2 Wedge ring SK5 SK5 SK5 1285 Air vent polycarbonate polycarbonate polycarbonate 1

No. Name of part 스텐티스제 주강제Material

Quantity

SShhaafftt SSeeaalliinngg SSyysstteemm

8

DDiimmeennssiioonnss

9

단위 : mm

Note: 1. Motor output classification numbers shoun are those for ordinary E class totally-enclosed, fan-cooled low-voltage 3-phase squirrel-cageinduction motors under JEM-1180-1967.

2. Asterisked M2 and LA di(₁)ensions vary to a certain, depending on motor manufacturers.3. Dimensions are subject to change without notice.

DDiimmeennssiioonnss

단위 : mm

10

DDiimmeennssiioonnss

11

Notes: 1. The motor output classification numbers shown are those for ordinary E class totally-enclosed, fan-cooled low-voltage 3-phase squirrel-cage induction motors under JEM-1180-1980.

2. Asterisked M2 and LA dimensions vary to a certain extent, depending on motor manufacturers.3. The dimensions are subject to change without notice

단위 : mm

■■HHEEAADDOOFFFFIICCEE450, KONGDUK-DONG, MAPO-KU, SEOUL, KOREA 121-020TEL : (02)707-6114 FAX : (02)711-5501

■■CCHHAANNGGWWOONN FFAACCTTOORRYY43-1, UNGNAM-DONG, CHANGWON-SI, KYUNGSANG-NAM-DOKOREA 641-290TEL : (0551)261-2114 FAX : (0551)261-0142

HHYYOOSSUUNNGG EEBBAARRAA CCOO..,, LLTTDD