(50' 6” W x 10' D x 10’ H)(1542 cm W x 305 cm D x 305 cm H)

Call Us: (707) 222-6066sales@deltaseparations.com

• 4-Hour Fire Rated, Insulated, Non-Combustible Steel

• Epoxy Coated Secondary Containment with Removable Galvanized Supports & Grating

• Heavy Gauge Steel Walls with Tube Frame & 10 Gauge Floor

• Forklift Pockets

•• Seismic Tie Down Pads

• Interior Ceiling Height 8’6” (262 cm Approx.)

• Two Part Chemical Resistant Paint Interior & Exterior

• Interior Ground Lugs with Exterior Ground Connection, Rod and Wire

• DOT Placard & NFPA Rating Sign

• NEMA 3R 400 Amp Load Center (1 Phase or 3 Phase)

• Class 1 Div 1 Interior Lights

• Class 1 Div 1 Roof Mounted Exhaust Fans

• Class 1 Div 1 Vapor Sensor with Redundant Roof Mounted Exhaust Fan*

•• Class 1 Div 1 Interior Exit Light with Back Up Battery

• Exterior Push Button Call Station*

• Dry Chemical Fire Suppression System*

• Wall Mounted Gravity Fed Self Contained Eyewash Station

• 4 Exterior Mounted GFCI Service Outlets

** Tied into Alarm Bell† Designed to Support Delta Separations Equipment $Additional Costs

deltaseparations.com

STANDARD

Optional Equipment$

• C1D2 A/C Unit

• C1D1 Heater

• C1D1 Receptacle

• C1D1 Switch

• Additional NEMA 3R 400 Amp 3 Phase Panel

• Plumbing Package†

•• Electrical Package†

PRO-POD MAXCOMPLIANT PROCESSING LAB

Ethanol Storage

• 4-Hour Fire Rated, Insulated, Non-Combustible Steel

• Epoxy Coated Secondary Containment with Removable Galvanized Supports & Grating

• Heavy Gauge Steel Walls with Tube Frame & 10 Gauge Floor

•• Forklift Pockets

• Seismic Tie Down Pads

• Interior Ceiling Height 8’6” (Approx.)

• Two Part Chemical Resistant Paint Interior & Exterior

• Interior Ground Lugs with Exterior Ground Connection, Rod and Wire

•• DOT Placard & NFPA Rating Sign

• NEMA 3R 100 Amp Load Center 1 Phase

• Class 1 Div 1 Interior Light

• Class 1 Div 1 Roof Mounted Exhaust Fan

• Dry Chemical Fire Suppression System Tied into Alarm Bell

Utility Room

• Double Wall Insulated Non-Combustible Steel Storage Building

• Plywood Subfloor with VCT Flooring

• Heavy Gauge Steel Walls with Tube Frame and 10 Gauge Floor

•• Forklift Pockets

• Seismic Tie Down Pads

• Interior Ceiling Height 8’6” (Approx.)

• Two Part Chemical Resistant Paint Interior & Exterior

• 3 Each 120V 20 Amp Receptacles

• DOT Placard & NFPA Rating Sign

•• NEMA 3R 100 Amp Load Center 1 Phase

• 4’ LED Light Fixture with Exterior Switch

Ethanol Storage - Optional Equipment

• C1D2 A/C Unit

• C1D1 Heater

• C1D1 Receptacle

• C1D1 Switch

• LEL System with Redundant Fan & Alarm

Utility Room - Optional Equipment

• General Purpose A/C Unit with Heat Pump

• Credit for Single Wall Construction

Solvent Storage(10’ W x 8’ 6” H)

Utility Room(10’ H x 9’ 7” W)

50’ 6”

10’10’

1 2 3 3

4 4

6 6

14

7

8

9

10

11

12

13

5

deltaseparations.com

ACCESSORY BUILDINGS

RECOMMENDED EQUIPMENT LAYOUT

1. Alcohol Chiller2. *Winterization Vessel3. CUP-30

4. Discharge Tank5. Eye Wash Station6. FFE-60 Pump & Cart

7. *Rotary Evaporator8. Pump Chiller9. Recirculating Heater10. *Rotary Evap

11. FFE Main Panel12. 2 CUP-30 Panels13. Dry Chem14. *Evap Chiller

*Not Supplied By Delta Separations