prizma - licence · 2017. 4. 23. · test repo rt: remarks: date: 201 7 -04-,19 si~ en 61386-1...

3
o w CX) o '<:!' z 1- Licence for the use of SIQ certification mark Number: 51-51Q 089/001 A 1 Project file: C20170946 Product: lnstalation conduits Type reference: see page 2 and 3 Trademark: PRIZMA FLEKS Rating s: see page 2 and 3 Applicant I Licensee: PRIZMA FLEK5 d.o.o. Bognarjeva pot 1, 51-1000 Ljubljana, 51ovenia Manufacturer: PRIZMA FLEKS d.o.o. Bognarjeva pot 1, Sl-1000 Ljubljana, Slovenia SIQ hereby grants the right to use the SIQ certification mark of conformity on the products specified in this document. The SIQ certification mark of conformity signifies the compliance of the products with requirements of cited standards. Certification mark: Standard: Test repo rt: Remarks: Date: 201 7-04-,19 EN 61386-1 :2008 EN 61386-22:2004+A11 :201 O T211-0245/17 A1; T211-0133/16; T211-0677/16 M1 This licence has been issued under the presumption and conditional on the fact that the licensee holds all necessary legal rights with regard to the product presented for testing and certification. This licence is valid as long as the conditions laid down in the listed standards are not modified significantly and until the licensee complies with the SIQ's rules on product certification. Authorized signature: Bojan Only integral publication of this licence is allowed. This licence may only be reproduced in its entirety and without any changes. On request SIQ will give information about the validity of the licence. SIQ Ljubljana, Tržaška cesta 2, 51-1000 Ljubljana, Slovenia T +386 1 4778 100, F +386 1 4778 444,[email protected],www.siq.si Page 1 (3)

Upload: others

Post on 27-Feb-2021

5 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: PRIZMA - Licence · 2017. 4. 23. · Test repo rt: Remarks: Date: 201 7 -04-,19 SI~ EN 61386-1 :2008 EN 61386-22:2004+A11 :201 O T211-0245/17 A1; T211-0133/16; T211-0677/16 M1 This

o w CX) o '<:!' z 1-

Licence for the use of SIQ certification mark

Number: 51-51Q 089/001 A 1 Project file: C20170946

Product: lnstalation conduits

Type reference: see page 2 and 3

Trademark: PRIZMA FLEKS

Rating s: see page 2 and 3

Applicant I Licensee: PRIZMA FLEK5 d.o.o. Bognarjeva pot 1, 51-1000 Ljubljana, 51ovenia

Manufacturer: PRIZMA FLEKS d.o.o. Bognarjeva pot 1, Sl-1000 Ljubljana, Slovenia

SIQ hereby grants the right to use the SIQ certification mark of conformity on the products specified in this document. The SIQ certification mark of conformity signifies the compliance of the products with requirements of cited standards.

Certification mark:

Standard:

Test repo rt:

Remarks:

Date: 201 7 -04-,19

SI~

EN 61386-1 :2008 EN 61386-22:2004+A11 :201 O

T211-0245/17 A1; T211-0133/16; T211-0677/16 M1

This licence has been issued under the presumption and conditional on the fact that the licensee holds all necessary legal rights with regard to the product presented for testing and certification. This licence is valid as long as the conditions laid down in the listed standards are not modified significantly and until the licensee complies with the SIQ's rules on product certification.

Authorized signature: Bojan Pečavar

Only integral publication of this licence is allowed. This licence may only be reproduced in its entirety and without any changes. On request SIQ will give information about the validity of the licence.

SIQ Ljubljana, Tržaška cesta 2, 51-1000 Ljubljana, Slovenia T +386 1 4778 100, F +386 1 4778 444,[email protected],www.siq.si Page 1 (3)

Page 2: PRIZMA - Licence · 2017. 4. 23. · Test repo rt: Remarks: Date: 201 7 -04-,19 SI~ EN 61386-1 :2008 EN 61386-22:2004+A11 :201 O T211-0245/17 A1; T211-0133/16; T211-0677/16 M1 This

Licence for the use of SIQ certification mark

Number: 51-SIQ 089/001 A1

Additional remarks:

The list of critical components of the product for which this licence is granted is included in the test report.

SIQ Licence Sl-SIQ 089/001 A 1 supersedes SIQ Licence Sl-SIQ 089/001 due to typing errors in additional remarks.

Type Color Resistance to Resistance to Lower Upper compression impact temperature temperature

range range

RFSS 11 Grey

125 N (Very Medium (2 -15°C +60°C

DIN Light) kg/100 mm) RFSS 13,5

Grey 125 N (Very Medium (2

-15°C +60°C DIN Light) kg/100 mm)

RFSS 16 Grey

125 N (Very Medium (2 -15°C +60°C

DIN Light) kg/100 mm) RFSS 23

Grey 125 N (Very Heavy (2

-15°C +60°C DIN Light) kg/300 mm)

RBT 11 DIN Orange 320 N (Light) Medium (2

-15°C +60°C kg/100 mm) RBT 13,5

O range 125 N (Very Medium (2

-15°C +60°C DIN Light) kg/100 mm)

RBT 16 DIN O range 125 N (Very Heavy (2

-15°C +60°C Light) kg/300 mm)

RBT 23 DIN Orange 125 N (Very Heavy (2

-15°C +60°C Light) kg/300 mm)

Materials:

Manufacturer: PetroHemija; Type: HDPE

Type Color Resistance to Resistance to Lower Upper compression impact temperature temperature range

range

RFSS 20 Grey

125 N (Very Medium (2 -15°C +60°C

IEC Light) kg/100 mm) RFSS 25

Grey 125 N (Very Medium (2

-15°C +60°C IEC Light) kg/100 mm)

RBT 20 IEC O range 125 N (Very Medium (2

-15°C +60°C Light) kg/100 mm)

RBT 25 IEC O range 125 N (Very Medium (2

-15°C +60°C Light) kg/100 mm)

RBT 32 IEC O range 320 N (Light) Heavy (2

-15°C +60°C kg/300 mm)

RBT 40 IEC O range 320 N (Light) Heavy (2

-15°C +60°C kg/300 mm)

Date: 2017-04-19 Authorized signature: Bojan Pečavar

SIQ Ljubljana, Tržaška cesta 2, SI-1000 Ljubljana, Slovenia T +386 1 4778 100, F +386 1 4778 444,[email protected],www.siq.si Page 2 (3)

Page 3: PRIZMA - Licence · 2017. 4. 23. · Test repo rt: Remarks: Date: 201 7 -04-,19 SI~ EN 61386-1 :2008 EN 61386-22:2004+A11 :201 O T211-0245/17 A1; T211-0133/16; T211-0677/16 M1 This

Licence for the use of SIQ certification mark

Number: 51-51Q 089/001 A1

Materials:

RBT: 85 % Marlex, 13 % Natur, 2 % color

RFSS: 60 % without MB, 30 % Natur, 8 % self-extinguishing material, 2 % color

Type Color Resistance to Resistance to Lower com pression impact temperature

range

RFSS 16 - 60 Ma Grey 125 N (Very Medium (2

-15°C Light) kg/100 mm)

RFSS 16- 60 Br Grey 125 N (Very Medium (2

-15°C Light) kQ/100 mm)

Materials:

RFSS 16 - 60 Ma: High density polyethylene (HDPE) "Marlex" HMM 5502BN

RFSS 16 - 60 Br: R PE-HD BRETENE TSCOR without MB

Places of manufacture, inspection file number:

Upper temperature range

+60°C

+60°C

PRIZMA FLEK5 d.o.o., Celjska cesta 1a, 51-3212 Vojnik, 51ovenia (258220-29232)

Limitation:

Date: 2017-04-19 Authorized signature: Bojan Pečavar

SIQ Ljubljana, Tržaška cesta 2, 51-1000 Ljubljana, Slovenia T +386 1 4778 100, F +386 1 4778 444,[email protected],www.siq.si Page 3 (3)