privategsm demo quickstart guide blackberry_en
TRANSCRIPT
PrivateGSM Demo Quick Start Guide for BlackBerry
© 2005-2011 PrivateWave Italia SpA - All trademarks and copyrights are property of their respective owners. All rights reserved.
Demo version for evaluation only
NOT FOR SALE: the PrivateGSM version you can purchaseis sold within the Enterprise VoIP Security Suite solution.
Quick Start Guide
PrivateGSM Demo 1
Summary
1. Before you begin
1.1 Some advices...
1.2 ...and one tip
2. Activation...in 3 easy steps!
1 Install PrivateGSM
2 Launch the Connection Wizard
3 Launch the Configuration Wizard
3. How it works
1 Invite your contacts
2 Make a secure call using PrivateGSM
3 Receive a secure call using PrivateGSM
4 Call phases
5 Check your security
6 Receive Only mode
4. Contacts
2
2
2
3
3
3
4
5
5
5
6
7
7
8
9
Quick Start Guide
PrivateGSM Demo
1. Before you begin...
1.1 Some advices...
= Your phone calls’ security is granted by using the VoIP data line instead of the voice one. Under particular events, due to the VoIP network condition, it could be present a little latency. In the presence of a WiFi internet connection, consider to use it for a better communication quality.
= As a VoIP phone call, with data-packet exchanging, both the caller and the called pay for the calling. To save your money consider to subscribe an unlimited mobile internet data plan with your mobile operator.
= If you have an enterprise Blackberry, see with your IT department if you can install additional applica-tions on it.
1.2 ...and one tip
= You can save in your address book the contacts to whom you want to make secure calls by adding thesecure prefix +801.
2
Quick Start Guide
PrivateGSM Demo
2. Activation...in 3 easy steps!
1 Install PrivateGSM
You can download PrivateGSM to your mobile from
http://www.privatewave.com
Just enter your mobile number; you will receive an email/text message including a download link.
Click on the link to start downloading the PrivateGSM installer.
Proceed by clicking on “Download”.
2 Launch the Connection Wizard
After the installation, in order to use PrivateGSM, you have to set its internet connection through the Con-nection Wizard. It automatically sets the network re-gardless of any BlackBerry options or enterprise BES.
It is always possible to change the Mobile Transport and APN (Access Point Network) data re-running the Wizard, or, if you are an expert user, just selecting:
Settings >> Advanced Settings >> Connection Settings
If the Wizard don’t work, select WiFi connection at the end of the process.
3
Quick Start Guide
PrivateGSM Demo
3 Launch the Configuration Wizard
In order to start making phone calls, restart PrivateGSM and choose Demo configuration. It will automatically configure PrivateGSM Demo for your phone.
Manual configuration is reserved to Pri-vateGSM for Enterprise VoIP Security Suite only, because set PrivateGSM to work with PrivateServer PBX.
Reboot the telephone to complete the installation.
!
4
Quick Start Guide
PrivateGSM Demo
!
3. How it works
1 Invite your contacts
Using your BlackBerry address book, you can invite your contacts to join PrivateGSM.
Open PrivateGSM main menu, select “Invite others” and choose the contacts to whom you want to make secure calls. They will receive a text message includ-ing the installation link.
Anyway, they can also download the software as de-scribed in step 1.
2 Make a secure call using PrivateGSM
Calling with PrivateGSM is very easy; you only need to add the secure prefix +801 before the number you want to call.
Remember to use the number in the international format, including the country code:
+41 079 1234567
with PrivateGSM becomes:
+801 41 079 1234567
5
Quick Start Guide
PrivateGSM Demo
!
!
6
It is either possible to make a secure call through the PrivateGSM menu. Select “Dial secure call”: your address book will appear and you will just have to select a name to activate a secure call.
To make a secure call, you and the called party must be running PrivateGSM soft-ware and be connected to the Internet.
3 Receive a secure call using PrivateGSM
Once PrivateGSM is installed and all the settings are correctly configured on your mobile, you are able to receive a secure call.
PrivateGSM displays an information note when an incoming secure call is ringing on your phone. You only need to press “OK” to allow the connection. The system exchanges and verifies the security keys and the conversation can start.
To receive a secure call, you must be run-ning PrivateGSM software and be con-nected to the Internet.
Quick Start Guide
PrivateGSM Demo
4 Call phases
To establish a call, PrivateGSM completes three phases, shown by three icons:
1. Red light: the connection is starting. This step may take several seconds.
2. Yellow light: ZRTP keys are being exchanged to secure the call.
3. Green light: secure call is established. Now it is possible to speak in a secure way.
5 Check your security
A PrivateGSM phone call is always encrypted.
To verify that there are no intrusions, after the call connection the system displays at the bottom of the screen a security code consisting of two random words to both parties.
If both, you and your contact, see the same security code then the call is secure. The security code is dif-ferent each time you make or receive a secure call.
7
Quick Start Guide
PrivateGSM Demo 8
6 Receive Only mode
As the trial period expires, PrivateGSM turns in Re-ceive Only mode.
In this mode PrivateGSM still allows you to receive secure calls for as long as the software is installed on your phone, but it’s no more possible to call other PrivateGSM users.
Quick Start Guide
PrivateGSM Demo
4. Contacts
For additional help and more information, please visit the support section at:
http://www.privatewave.com
To contact our technical support:
Tel: +39 02 911 930 891E-mail: [email protected]
Office hours: Monday to Friday, 10.00 AM - 12.00 PM and 2.30 PM - 4.30 PM (GMT +1)
We remind you that the PrivateGSM Demo version is for evaluation purpose only, to show how the software works. The full version on sale is part of the Enterprise VoIP Security Suite solution for fixed-mobile encryption in a company network.
For more information or technical details on the Enterprise VoIP Security Suite, get in contact with our sales team:
E-mail: [email protected]
9