33m

m

108mm

TLPDXXX

Tradetec Prime Downlight

77mm - 92mm

77-92mm

Martec Pty Ltd6 Austool Pl | Ingleburn, NSW 2565 P: 02 8778 7500F: 02 8778 7555E: customerservice@martecltd.com.au

Thermal insulation clearance class-IC covered; meaning that thePrime LED down light can be covered entirely by insulationBuilding insulation abutting or is within 100mm horizontally of the luminaire must meet the following requirements: Be of atype that can maintain its dimensions and structural integritywhen exposed to a maximum surface temperature of the class ofthe luminaire, being 90⁰C; Be of a type that can withstand a 30second needle flame test carried out in accordance with AS/NZS60695.11.5 with a flame applied to all surfaces of the sampleInsulation types which should be used with this fitting are glasswool (Pink Batts) & polyester

The Prime down light can be dimmed to 10%.

Martec LED down lights are compatible and supported with the MartecMTD300VA dimmer.

All other dimmers may work, but are not supported by Martec.