168

PRIMA LED Ex

… for explosion hazard environment group II, category 3 (zone 2, 22).

The light fitting is suitable for the environment with a danger of explosion of gas, dust and combustible fumes. The light fittings meet the requirements of Government Decree 116/2016 Coll. and European Community Directive No.2014/34/EU.

The light fitting is certified for the environment: II 3G Ex nR IIC T6 Gc II 3D Ex tc IIIC T70°C Dc

The basic requirements for safety and health pro-tection are secured by the verification of conformity with the standards according to ČSN EN 60079-15, ČSN EN 60079-0 and ČSN EN 60079-31.

The light fitting is resistant to dust, moisture and spouting water. The body and the diffuser made of polycarbonate (PC) have the increased resist-ence against deformation and impact.

(It is necessary to consider exhalation in the air reducing the usability of the plastic at installa-tions in an aggressive environment, see also page 317).

• Standard model - CRI > 80: 4000 K• At request CRI > 80: 3000 K, 5000 K, 6500 K• Clips: stainless steel + polyamide + 15 %

glass fibre• Through-wiring of up to 10 wires at body• Certification: TÜV CY 22 ATEX 0206610 X• At request also versions according to the stand-

ard for EAC states (Russia, Kazakhstan, Bela-rus, Armenia).

• Light fitting protection IP66• Maximum ambient temperature up to ta = 55°C• Lifetime: 50,000 hours / L90B10• Diffuser: translucent polycarbonate (PC) = high

mechanical resistance• Body: grey polycarbonate (PC) = high mechani-

cal resistance• Up to 45 % lower electricity consumption when

compared to fluorescent tubes• Current driver with the possibility of constant

luminous flux for whole lifetime (CLO)• Constant luminous flux even in ambient tem-

perature of -25 °C

USE ADVANTAGES

55ºC

up to

-25ºC

up to

220-250 V

0/50/60 Hz

LED

CRI

>80DALI

B 10L 90

169CZECH LIGHT FITTINGS 169

PRIMA LED Ex PCc

Code TypeMax. ambient temperature

[°C]

Luminous fluxof LED modules

[lm]

Luminous fluxof light fitting

[lm]

Power consumption

[W]

Systemefficacy[lm/W]

Net weight

[kg]

A [mm]

D [mm]

For ambient temperature ta = 55 °C - body: grey polycarbonate - diffuser: translucent polycarbonate14810 PRIMA LED Ex 1.4ft PCc 3200/840 55 3200 2910 22 132 3,2 1272 70014820 PRIMA LED Ex 1.4ft PCc 4400/840 55 4400 4000 30 133 3,3 1272 70014830 PRIMA LED Ex 1.5ft PCc 4000/840 55 4000 3640 27 135 4,1 1572 94014840 PRIMA LED Ex 1.5ft PCc 5500/840 55 5500 5010 37 135 4,2 1572 94014850 PRIMA LED Ex 2.4ft PCc 6400/840 55 6400 5820 42 139 3,4 1272 70014860 PRIMA LED Ex 2.4ft PCc 8800/840 55 8800 8010 58 138 3,5 1272 70014870 PRIMA LED Ex 2.5ft PCc 8000/840 55 8000 7280 53 137 4,3 1572 94014880 PRIMA LED Ex 2.5ft PCc 11000/840 55 11000 10010 71 141 4,4 1572 940

TypeMax. ambient temperature

[°C]

Luminous fluxof LED modules

[lm]

Luminous fluxof light fitting

[lm]

Power consumption

[W]

Systemefficacy[lm/W]

Net weight

[kg]

A [mm]

D [mm]

Version with emergency back-up source M1h, M3hPRIMA LED Ex 1.4ft PCc 3200/840 Mxh 50 3200 2910 22 132 3,7 1272 700PRIMA LED Ex 1.4ft PCc 4400/840 Mxh 50 4400 4000 30 133 3,8 1272 700PRIMA LED Ex 1.5ft PCc 4000/840 Mxh 50 4000 3640 27 135 4,6 1572 940PRIMA LED Ex 1.5ft PCc 5500/840 Mxh 50 5500 5010 37 135 4,7 1572 940PRIMA LED Ex 2.4ft PCc 6400/840 Mxh 45 6400 5820 42 139 3,9 1272 700PRIMA LED Ex 2.4ft PCc 8800/840 Mxh 40 8800 8010 58 138 4,0 1272 700PRIMA LED Ex 2.5ft PCc 8000/840 Mxh 45 8000 7280 53 137 4,8 1572 940PRIMA LED Ex 2.5ft PCc 11000/840 Mxh 40 11000 10010 71 141 4,9 1572 940

PRIMA LED Ex PCc

• Clips: stainless steel + polyamide + 15 % glass fibre• Distance part: polyamide + 10 % glass fibre,

serves to suspend the reflector during assembly• Terminal block: screwless, five-pole (version

1.4ft and 1.5ft), three-pole incl. earthing tape & screw for a perfect connection (basic version)

• Installation: package contains stainless hooks and stainless brackets

• Electric equipment: LED modules, current driver, halogen-free wires with higher tem-perature resistance

• Light fitting protection: IP66• Maximum ambient temperature: from -25 to 55 °C• Maximum ambient temperature:

from 0 to 50 °C (version with emergency back-up source for 1 or 3 hours; M1h, M3h)

• Maximum system efficacy: 141 lm/W• The watt and lumen values can vary by ± 7,5 %• Standard model - CRI > 80: 4000 K• MacAdam = 3 SDCM• Lifetime: 50,000 hours / L90B10• Diffuser: translucent polycarbonate (PC), UV

stable, impact-resistant• Body: grey polycarbonate (PC), UV stable,

impact-resistant• Reflector: steel sheet, white colour (RAL 9003)

PRIMA LED Ex 2.5ft180° 150°150°

0° 30°30°

90°

60°

90°

60°

120°120°

14810 PRIMA LED Ex 1.4ft PCc 3200/840 = suitable replacement for PRIMA Ex 136 PCc E – 1 × 36 W14830 PRIMA LED Ex 1.5ft PCc 4000/840 = suitable replacement for PRIMA Ex 158 PCc E – 1 × 58 W14850 PRIMA LED Ex 2.4ft PCc 6400/840 = suitable replacement for PRIMA Ex 236 PCc E – 2 × 36 W14870 PRIMA LED Ex 2.5ft PCc 8000/840 = suitable replacement for PRIMA Ex 258 PCc E – 2 × 58 W

Example of type marking: 14853 = PRIMA LED Ex 2.4ft PCc 6400/840 3F

PRIMA LED Ex PCc Non-dimmable driver - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

14810 PRIMA LED Ex 1.4ft PCc 3200/840 14811 14813 14814 14815 14817 1481814820 PRIMA LED Ex 1.4ft PCc 4400/840 14821 14823 14824 14825 14827 1482814830 PRIMA LED Ex 1.5ft PCc 4000/840 14831 14833 14834 14835 14837 1483814840 PRIMA LED Ex 1.5ft PCc 5500/840 14841 14843 14844 14845 14847 1484814850 PRIMA LED Ex 2.4ft PCc 6400/840 14851 14853 14854 14855 14857 1485814860 PRIMA LED Ex 2.4ft PCc 8800/840 14861 14863 14864 14865 14867 1486814870 PRIMA LED Ex 2.5ft PCc 8000/840 14871 14873 14874 14875 14877 1487814880 PRIMA LED Ex 2.5ft PCc 11000/840 14881 14883 14884 14885 14887 14888

DA

145

100

111

PRIMA LED Ex 1.4ft180° 150°150°

0° 30°30°

90°

60°

90°

60°

120°120°

TECHNICAL DESCRIPTION

C0

C90

170170

PRIMA LED Ex PCc

LIGHT FITTING ATTACHMENTa) Directly to a ceiling or a wall with the use of screws and stainless bracketsb) Suspension with the use of stainless hooksc) Attachment with the use of side hangers to the wall

LIGHT FITTING DETAILED VIEWPRIMA LED Ex

PRIMA LED Ex PCc DALI Digital dimmable driver DALI - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

14910 PRIMA LED Ex 1.4ft PCc 3200/840 DALI 14911 14913 14914 14915 14917 1491814920 PRIMA LED Ex 1.4ft PCc 4400/840 DALI 14921 14923 14924 14925 14927 1492814930 PRIMA LED Ex 1.5ft PCc 4000/840 DALI 14931 14933 14934 14935 14937 1493814940 PRIMA LED Ex 1.5ft PCc 5500/840 DALI 14941 14943 14944 14945 14947 1494814950 PRIMA LED Ex 2.4ft PCc 6400/840 DALI 14951 14953 14954 14955 14957 1495814960 PRIMA LED Ex 2.4ft PCc 8800/840 DALI 14961 14963 14964 14965 14967 1496814970 PRIMA LED Ex 2.5ft PCc 8000/840 DALI 14971 14973 14974 14975 14977 1497814980 PRIMA LED Ex 2.5ft PCc 11000/840 DALI 14981 14983 14984 14985 14987 14988

1F 1-phase 3 core through-wiring in the luminaire3F 3-phase 5 core through-wiring in the luminaireM1h emergency back-up source with 1 hour operating time for maintained emergency illuminationM3h emergency back-up source with 3 hour operating time for maintained emergency illumination3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)

DALI version with digital dimmable driver DALIDALI 1F 1-phase 5 core through-wiring in the luminaire DALI 3F 3-phase 7 core through-wiring in the luminaire DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)

LEGEND