price list - splits mounting accessories

Splits mounting Accessories

Price ListJune2017

®

PRICES MAY CHANGE, PLEASE, CONTACT OUR COMMERCIAL DEPARTMENT

FOR UPDATED PRICES BEFORE PLACING YOUR ORDER

It's strictly prohibited the total or partial reproduction of this Price list, weather by electronic means,

mechanic, photocopy or any other, without the prior permission of SALVADOR ESCODA S.A.

The information stated on this publication (prices, product photos, sizes, performance, features, etc.) are

based on original documents supplied by the product manufacturers or calculated by SALVADOR ESCODA

S.A. according to that information or other sources, being susceptible to modifications with no previous

warning, mistakes or omissions that will not imply, in any case, the acceptance of any legal responsibility.

The prices listed on this Price List DO NOT INCLUDE V.A.T.

PRICE LIST - SPLIT MOUNTING ACCESSORIES. June 2017

SALVADOR ESCODA S.A.

TABLE OF CONTENTS

Continue on next page

Page Page

BRACKETS FOR OUTDOOR UNITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 to 7BRACKET FOR SLOPED ROOF OR FLOOR . . . . . . . . . . . . . . . . . . . . . . . . . . . 6ANTI-VIBRATION SLAB FOR MACHINES ASSEMBLY . . . . . . . . . . . . . . . . . . . 7ADJUSTABLE UNIVERSAL FRAMES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 to 9BASE FOR PROFILE BRACKETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9FLOOR SUPPORTS FOR OUTDOOR UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . 10COMPATIBLE BRACKETS FOR DUCTS AND MACHINES . . . . . . . . . . . . . . . . 11HARDWARE FOR SPLITS ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12BICOMPONENT CHEMICAL ANCHORAGE RESIN BASED . . . . . . . . . . . . . . . 13METAL PROFILE SUSPENSION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13SPACER/ENLARGER SLEEVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13TELESCOPIC TEMPLATE FOR UNITS INSTALLATION . . . . . . . . . . . . . . . . . . 13FIXING SYSTEMS ABOVE METAL BEAM . . . . . . . . . . . . . . . . . . . . . . . . . . . 14QUICK FIXING SYSTEMS ABOVE CONCRETE BEAMS . . . . . . . . . . . . . . . . . 14FIXING SYSTEMS ON HOLLOW WALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14SPLITS ASSEMBLY BAGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15DUCTS WITH PIPE PROTECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 to 21FIXING SYSTEMS FOR DRAINAGE CHANNELS . . . . . . . . . . . . . . . . . . . . . . . 19AESTHETIC FRONT DUCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21GUTTER FOR CLAMPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21DRAIN HOSE COVERING DUCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22INLET FOR FLAT ROOFS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22ANGULAR MITER CUTTER FOR DUCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22EMBEDDED PRE-INSTALLATION BOXES . . . . . . . . . . . . . . . . . . . . . . . 23 to 24CONDENSATE REMOVAL SIPHONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24CONDENSATE DRAINAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25DEFLECTOR FOR INDOOR UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25CONDENSED FLUID CONTAINERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26ACOUSTIC CONTROLLER FOR CONDENSATE LEVEL . . . . . . . . . . . . . . . . . . 26MACHINE DRAIN HOSE ELBOW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26CHECK VALVE - DRAIN TUBE FOR CONDENSATES . . . . . . . . . . . . . . . . . . . 26FLEXIBLE TUBE FOR DRAINAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27RIGID DRAIN PIPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 to 29ANTI-ODOUR VALVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30FIXING FOR DRAIN HOSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30CONDENSATES EVAPORATOR FOR OUTSIDE . . . . . . . . . . . . . . . . . . . . . . . 30CONDENSATE REMOVAL PUMP WITH VISIBLE TANK INSTALLATION . . . . . 31CONDENSATE REMOVAL MINIPUMPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32CONDENSATE REMOVAL PUMPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 to 41ELECTRICAL ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 to 47ROTARY SWITCH FOR OUTDOOR USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47SPLITS PROTECTION SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48AIR DEFLECTOR FOR CASSETTE TYPE EQUIPMENT . . . . . . . . . . . . . . . . . . 48LINESET BENDER FOR INSULATED PIPES “Easybend” . . . . . . . . . . . . . . . . 48INSULATED AND LINED COPPER PIPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49DOUBLE INSULATED AND LINED COPPER PIPE . . . . . . . . . . . . . . . . . . . . . 49INSULATED COPPER PIPE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50REFRIGERATION COPPER PIPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50COPPER ACCESSORIES FOR SPLITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51PROTECTION INSULATED COPPER PIPE . . . . . . . . . . . . . . . . . . . . . . . . . . . 52HARDWARE FOR SPLIT ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52TUBE IDENTIFICATION PLATES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52INSULATED MULTI-PURPOSE BRANCH JOINT FOR MULTI-SPLIT. . . . . . . . . 53INSULATED MULTI-PURPOSE COLLECTORS FOR MULTI-SPLITS . . . . . . . . . 53DIRECTION CHANGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53BRANCH JOINT SET - DISTRIBUTOR FOR MULTI-SPLIT SYSTEM AND MVD . . . 54BRASS FITTINGS “SAE” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55TUBULAR INSULATION AND ACCESSORIES . . . . . . . . . . . . . . . . . . . . 56 to 58BOXES OF TUBULAR INSULATION IN ROLLS . . . . . . . . . . . . . . . . . . . . . . . . 58INSULATION ROLLS AND SHEETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59ADHESIVE TAPES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59INSULATED PIPE CLAMP FOR TUBES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60ISOPHONIC PIPE CLAMPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60FIXING SYSTEMS FOR INSULATED PIPES . . . . . . . . . . . . . . . . . . . . . . . . . . 61HANGER FOR INSULATED PIPES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61ANTI-CONDENSATION TAPE FOR REFRIGERATION . . . . . . . . . . . . . . . . . . . 61SILICONE SEALING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61PVC CLAMPS POR INSULATED PIPES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62VALVES FOR SPLITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62STRAIGHT PASS VALVES WHEEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62LOADING VALVES AND ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

RUBBER VIBRATION ABSORVER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64VIBRATION ABSORVERS MATS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65RUBBER STUDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65RUBBER BRACKETS FOR THE CEILING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65METAL VIBRATION ABSORBERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66REFRIGERANT GASES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 to 68REFRIGERANT GAS IN REFILLABLE BOTTLES . . . . . . . . . . . . . . . . . . . . . . . 69REFRIGERANT GAS IN DISPOSABLE BOTTLE . . . . . . . . . . . . . . . . . . . . . . . 69SHUT-OFF VALVES FOR BOTTLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69OIL FOR REFRIGERATION SYSTEMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69SPARE PARTS ACCESSORIES FOR AIR CONDITIONING . . . . . . . . . . . . . . . . 70FOUR-WAY REVERSE CYCLE VALVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71DISCHARGE MUFFLERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71SOLDERING BALL VALVE - ODS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71DRYER FILTERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 to 74SMALL POWER FILTERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74SCI HERMETIC ROTARY COMPRESSOR FOR AIR CONDITIONER . . . . . 75 to 77STARTER CONDENSATOR COMPRESSORS . . . . . . . . . . . . . . . . . . . . . . . . . 77HITACHI ROTARY HERMETIC COMPRESSOR FOR AIR CONDITIONER . . . . . 78PANASONIC SCROLL HERMETIC COMPRESSOR FOR AIR COND. . . . 79 to 80SCROLL HERMETIC COMPRESSOR FOR COOLING . . . . . . . . . . . . . . . . . . . 80HERMETIC COMPRESORS «R-134a» EMBRACO ASPERA. . . . . . . . . . . . . . 81HERMETIC COMPRESSORS L’UNITÉ HERMETIQUE . . . . . . . . . . . . . . . . . . . 82HERMETIC COMPRESORS SECOP DANFOSS AND DONPER . . . . . . . . . . . . 83HERMETIC COMPRESSORS MANEUROP . . . . . . . . . . . . . . . . . . . . . . 84 to 85HERMETIC COMPRESSORS BRISTOL . . . . . . . . . . . . . . . . . . . . . . . . . 86 to 87HERMETIC COMPRESSORS «ISOBUTANO R-600a» . . . . . . . . . . . . . . . . . . 87COMPRESORS «SCROLL» DWM COPELAND . . . . . . . . . . . . . . . . . . . 88 to 89ROTATIVE COMPRESSORS AIR CONDITIONER . . . . . . . . . . . . . . . . . . . . . . 90MOTORS FOR FAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 to 92AIR SWING MOTORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93BLADES FOR AXIAL FANS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93TANGENTIAL IMPELLER INDOOR UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94CONDENSERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94TUBE CUTTING TOOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 to 96FLARING TOOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 to 98EXPANDER TOOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98PUNCH TYPE SWANGING TOOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98REARMERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99EXPANDING TOOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99PIPE BENDING TOOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 to 102SERVICE TOOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 to 107CLEANING EQUIPMENTS FOR COOLING CIRCUITS . . . . . . . . . . . . . 108 to 110CLEANERS FOR REFRIGERATING CIRCUITS . . . . . . . . . . . . . . . . . . . . . . . 110VACUUM PUMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111OIL FOR VACUUM PUMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111ANALYZERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112ANALYSERS CASE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113MANOMETERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 to 114VACUUM GAUGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114SHUT-OFF VALVE VACUUM GAUGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115RUBBER PROTECTORS FOR PRESSURE GAUGE. . . . . . . . . . . . . . . . . . . . 115DIGITAL VACUUM GAUGES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115CHARGING HOSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116FAST CONNECTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116CASES FOR REFRIGERATION ENGINEERS . . . . . . . . . . . . . . . . . . . . 117 to 118COMPLETE UNIVERSAL DOUBLE CASE . . . . . . . . . . . . . . . . . . . . . . . . . . 118CASE FOR INSTALLER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119PORTABLE PRESSURE GAUGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119CHARGE DISPENSER CYLINDER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119PHASE DETECTOR FOR COMPRESSORS . . . . . . . . . . . . . . . . . . . . . . . . . 119DIGITAL ANALYSER BLUETOOTH + APP . . . . . . . . . . . . . . . . . . . . . . . . . . 120TESTO COOLING ANALYSER 570-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120DIGITAL VACUUM GAUGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120COOLING SMART METERING SMART PROBES . . . . . . . . . . . . . . . . . . . . . 121DIGITAL ANALYSER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122RECOVERY AND RECYCLING EQUIPMENT . . . . . . . . . . . . . . . . . . . . . . . . 122RECOVERY AND REFILL EQUIPMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123RECICLYNG PORTABLE KIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123DIGITAL CHARGING SCALES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124AUTOGENOUS WELDING DEVICES . . . . . . . . . . . . . . . . . . . . . . . . . 125 to 130

TABLE OF CONTENTSPage Page

LEAK DETECTORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 to 133OIL TRANSFER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133CHECK PUMP FOR WATER SYSTEMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133IN-LINE INJECTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133ANTIFREEZING FOR COOLING SYSTEMS . . . . . . . . . . . . . . . . . . . . . . . . . . 134AEROSOL PROTECTION AND MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . 134SMOKE GENERATOR FOR LEAKAGE DETECTION . . . . . . . . . . . . . . . . . . . 135ARTIFICIAL SMOKE GENERATOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135EXTERNAL CLEANING EQUIPMENTS AND PRODUCTS . . . . . . . . . . 136 to 139DRYING LIQUID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140ANTI-LIME DESCALING PUMPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140AIR COMPRESSORS AND ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . 141SEALING FOR THREADS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141JOINT SEALANT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142EPOXY-VULCANIZED ADHESIVE SEALING . . . . . . . . . . . . . . . . . . . . . . . . . 142MACHINERY AND DUCT INSPECTION CAMERA . . . . . . . . . . . . . . . . . . . . 142LOUPE WITH A LED LAMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142LIFTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 to 145CARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146METALS DETECTORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146SERVICE MIRROR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146TELESCOPIC FLASHLIGHT AND BARRS . . . . . . . . . . . . . . . . . . . . . . . . . . 146OIL ANALYSIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147“PRIMERS” LEAK SEALER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147QUICK SERVICE KITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148LEAK SEALANT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148ACIDITY NEUTRALIZER FOR COMPRESSORS . . . . . . . . . . . . . . . . . . . . . . 149WORK SPOTLIGHTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149WORK PORTABLE SPOTLIGHTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149HEAD SPOTLIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149WIRE ROLLER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149VACUUM CLEANERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150LEVELS, TAPE MEASURE, SQUARES . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151GRINDING MACHINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151VENEER CUTTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151ELECTRICAL TOOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 to 154DIGITAL THERMOMETERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155 to 158THERMAL CAMERAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 to 159ANEMOMETERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159 to 161THERMO-ANEMOMETER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162TEMPERATURE INDICATION PANELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162CLAMP METERS AND DIGITAL MULTIMETERS . . . . . . . . . . . . . . . . . . . . . 163DIGITAL HYGROMETERS-THERMOMETERS . . . . . . . . . . . . . . . . . . 164 to 165DIGITAL WEATHER STATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166TACHOMETRES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166DISTANCE METER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166DIGITAL MANOMETER (AIR OR GAS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167INTEGRATING SOUND LEVEL METER . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167ALKALINE BATTERIES (BLISTER) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167ALUMINIUM SUPERFLEXIBLE DUCT . . . . . . . . . . . . . . . . . . . . . . . . 168 to 170ELASTIC GASKETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170FLEXIBLE PIPES FIXATION TO FIBER DUCTS . . . . . . . . . . . . . . . . . . . . . . . 171FIXING ACCESSORIES FOR FLEXIBLE TUBES . . . . . . . . . . . . . . . . . . . . . . 172CIRCULAR HELICAL TUBE AND ACCESSORIES GALVANIZED PLATE . . . . . 173SIMPLE TEES AND DERIVATION TOOLS . . . . . . . . . . . . . . . . . . . . . . . . . . 173REDUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174TOOLS FOR WORKING WITH PLATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174VENTILATION BOXES AND ACCESSORIES . . . . . . . . . . . . . . . . . . . . 175 to 179CENTRIFUGAL FANS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180 to 181SPEED REGULATORS SINGLE PHASE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181WALL-MOUNTED HELICOIDAL FANS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182LARGE DIAMETER FAN (IDEAL FOR FARMS). . . . . . . . . . . . . . . . . . . . . . . 182CEILING FAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182EXTRACTORS FOR INSERTING IN DUCTS . . . . . . . . . . . . . . . . . . . . . . . . . 182DOMESTIC SERIES EXTRACTORS . . . . . . . . . . . . . . . . . . . . . . . . . . 183 to 185FANS FOR COLD STORAGE CHAMBERS . . . . . . . . . . . . . . . . . . . . . . . . . . 186EXTRACTION HOODS FOR INDUSTRIAL KITCHENS . . . . . . . . . . . . . . . . . . 187AIR FILTRATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188CONTROLS FOR E-BI-ON MODULES . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188FILTER UNITS Slimfilter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189ESCOCLIMA GRILLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 to 191

CIRCULAR DIFUSSER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192PLASTIC EXTRACTION DISC VALVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192METALLIC EXTRACTION DISC VALVES . . . . . . . . . . . . . . . . . . . . . . . . . . . 192STAINLESS STEEL DISC VALVES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192CURVED BLADES OUTLET GRILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193AIR RETURN GRILL TO REPLACE CEILING PLATE . . . . . . . . . . . . . . . . . . . 193LONG RANGE JET NOZZLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194STANDARD CROSSBARS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194SPECIAL CROSSBARS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194CONTROL AND REGULATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195THERMOSTAT AND CHRONOTHERMOSTAT VIA RADIO . . . . . . . . . . . . . . . 195FANCOIL THERMOSTATS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196DAMPER ACTUATORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196TOUCH SCREEN THERMOSTATS ESCO-TOUCH Series . . . . . . . . . . . . . . . 197THERMOSTATS DIGITAL SURFACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197THERMOMETER DIGITAL SURFACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197THERMOMETERS-THERMOSTATS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198UNIVERSAL REMOTE CONTROL FOR SPLITS . . . . . . . . . . . . . . . . . . . . . . 199AIR FRESHENER TABLETS «CLIMA FRESH» . . . . . . . . . . . . . . . . . . . . . . . 199

“MUNDOCLIMA” 2017 RANGE AIR CONDITIONER:MUNDOCLIMA PRICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202 to 214AIR CONDITIONER - TECHNICAL INFORMATION

- Wall Split 1x1 Inverter MUPR-H6 . . . . . . . . . . . . . . . . . . . 215 to 216- Wall Split 1x1 Inverter MUPR-H5A . . . . . . . . . . . . . . . . . 217 to 218- Wall Split 1x1 Inverter MUPR-H7 . . . . . . . . . . . . . . . . . . . 219 to 220- Multisplit Inverter H6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221 to 223- Wall Multisplit Inverter MUPR-H6M . . . . . . . . . . . . . . . . . . . . . . 224- Multisplit cassette type MUCSR-H6M . . . . . . . . . . . . . . . . . . . . 225- Multisplit duct type MUCR-H6M . . . . . . . . . . . . . . . . . . . . . . . . 226- Multisplit Inverter H3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228 to 231- Cassette type air conditioner MUCSR-H6 . . . . . . . . . . . . 232 to 236- Ceiling-Floor air conditioner MUSTR-H6 . . . . . . . . . . . . . 237 to 241- Duct air conditioner MUCR-H6 . . . . . . . . . . . . . . . . . . . . 242 to 246- Split Duct great capacity . . . . . . . . . . . . . . . . . . . . . . . . . 247 to 249- Column type Air Conditioner MUCO-H6 . . . . . . . . . . . . . . . . . . . 250- Window Air Conditioner MUVR-C6 . . . . . . . . . . . . . . . . . . . . . . 251- Air Conditioner without outdoor unit MU-WZ . . . . . . . . . . . . . . . 252- Monobloc portable air conditioner MUPO C6/H6 . . . . . . . . . . . . 253

VARIABLE FLOW RATE “MUNDOCLIMA-MVD” TECHNICAL INFORMATION- MINI MVD V4+ Outdoor Units . . . . . . . . . . . . . . . . . . . . 255 to 260- MAXI MVD 2 pipes V5X Outdoor Units . . . . . . . . . . . . . . . 261 to 267- MAXI MVD 3 pipes VR4+ Outdoor Units . . . . . . . . . . . . . 268 to 274- Manifolds MVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275

HYDRONIC RANGE - TECHNICAL INFORMATION- Wall mounted fan coil unit MUP-W7 . . . . . . . . . . . . . . . . . . . . . 277- Cassette type fan coil unit . . . . . . . . . . . . . . . . . . . . . . . . 278 to 279- Universal fan coil unit horizontal and vertical . . . . . . . . . 280 to 284- Duct fan coil unit MUC-HP4 . . . . . . . . . . . . . . . . . . . . . . 285 to 286- Control kit for fan coil unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287- Water chiller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288 to 292

AEROTHERM - PRICES AND TECHNICAL INFORMATION- Monobloc and Bibloc Aerotherm V17 . . . . . . . . . . . . . . . 295 to 297- Heat pumps for SHW . . . . . . . . . . . . . . . . . . . . . . . . . . . 298 to 299

“AUX” AIR CONDITIONER“AUX” PRECIOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302TECHNICAL INFORMATION

- Wall Split 1x1 Inverter MSW-QC . . . . . . . . . . . . . . . . . . . 303 to 304- Wall Split 1x1 Inverter ASW-FH . . . . . . . . . . . . . . . . . . . . 305 to 306- Multisplit Inverter AM . . . . . . . . . . . . . . . . . . . . . . . . . . . 307 to 308- Wall Split 1x1 Inverter AMW-FH . . . . . . . . . . . . . . . . . . . 309 to 310

“DAIKIN” AIR CONDITIONERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311 to 312“MUNDOCLIMA” AIR CURTAIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313 to 322“MUNDOCLIMA” HEAT RECOVERY UNIT . . . . . . . . . . . . . . . . . . . . . 323 to 325“MUNDOCLIMA” DEHUMIDIFIER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326EVAPORATIVE PORTABLE CONDITIONERS . . . . . . . . . . . . . . . . . . . 327 to 328EVAPORATIVE REFRESING UNIT FOR OUTDOOR . . . . . . . . . . . . . . . . . . . . 329WALL HEATER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330

SPLITS MOUNTING ACCESSORIES

PRICE LISTV.A.T. not included Check possible updates

1

BRACKETS FOR OUTDOOR UNIT

REINFORCED bracket- Painted in cream epoxy-polyester.- 2 mm metal sheet.- Ø11 wall fixing drills.- Corner reinforcement.- Supplied in single cardboard box.- Max. load: 150 kg.

Code Item €

«SOPORT-ESC»

AS 01 001

AS 01 002

AS 01 003

AS 01 018

SMALL model «P» Pack + than 10 pcs.MEDIUM model «M» Pack + than 10 pcs.BIG Model «G» Pack + than 10 pcs.SUPER model «S» Pack + than 10 pcs.

14.5012.0015.0012.5015.5013.0017.4015.00

IN «NEUTRAL» CARDBOARD BOX

AS 01 004

AS 01 005

AS 01 006

AS 01 019

SMALL model «PN» Pack + than 10 pcs.MEDIUM model «MN» Pack + than 10 pcs.BIG model «GN» Pack + than 10 pcs.SUPER model «SN» Pack + than 10 pcs.

15.1013.3016.1513.7517.2514.6517.8215.20

ECO bracket- Painted in cream epoxy-polyester.- 1.5 mm metal sheet.- Ø11 wall fixing drills.- Supply of PVC retractable.- Max. load: 80 kg.

Code Item €

«SOPORT-ESC» ECO

AS 01 057 SMALL model 400 Pack + than 10 pcs.

8.758.15

AS 01 058 MEDIUM model 450 Pack + than 10 pcs.

9.258.70

AS 01 059 BIG model 500 Pack + than 10 pcs.

9.759.10

AS 01 504 SUPER model 560 10.50

AS 01 505 SUPER LONG model 600 (2 mm metal sheet) 12.50

INOX bracket

Code Item €

«SOPORT-ESC INOX»

AS 01 007AS 01 008AS 01 009

• AISI-314 stainless metal sheet (1.5 mm)• Max. load: 100 kgSMALL model «PI»MEDIUM model «MI»BIG model «GI»

57.2060.3866.75

DIMENS.mm A B

Small 400 400

Medium 450 450

Big 500 525

Super 500 560

DIMENS.ECO and INOX

mmA B

Small 400 400

Medium 450 450

Big 500 500

Super 500 560

Super long 500 600

ONLY FORWHOLESALE

Detail

ModelREINFORCED

ModelECO

Soport-Esc Inox

2 SPLITS MOUNTING ACCESSORIES



CH bracket

Code Item €

• Painted in cream epoxy-polyester• 1.5 mm metal sheet• Supplied in plastic film• Max. load: 80 kg

AS 01 501 SMALL model 400 Pack + than 10 pcs.

7.506.85/pc.

AS 01 502 MEDIUM model 450 Pack + than 10 pcs.

7.807.20/pc.

AS 01 503 BIG model 500 Pack + than 10 pcs.

8.207.50/pc.

TANQUE bracket- 3 mm metal sheet.- 4 Ø11 wall fixing drills.- Max. load: 200 kg.

Code Item €

AS 01 016

• Painted in cream epoxy-polyester• Supplied in individual package«TA» TANQUE model 72.40

Three-positionbrackets- 1.5 mm metal sheet.- Ø11 wall fixing drills.- 3 assembly positions with

2 screws and nuts.- Max. load: 120 kg.

Code Item €

AS 01 011

• Painted in cream epoxy-polyester• Supplied in cardboard boxSMALL model «3PP» Pack + than 10 pcs.

12.0011.30

AS 01 012 MEDIUM model «3PM» Pack + than 10 pcs.

13.1512.25

AS 01 013 BIG model «3PG» Pack + than 10 pcs.

13.8012.65

3 mmMETAL SHEET

DIMENS.mm A B

Small 400 400

Medium 450 450

Big 500 520

ModelCH



3


“FIX” FLAG TYPE bracket set- 2 mm metal sheet.- Painted in epoxy.

Code Item €

AS 01 071AS 01 072

LONG model 900EXTRALONG model 1100

36.2045.40

“TELESCOPIC” FLAG TYPE bracket set

- 3 mm metal sheet.- Adjustable length.- 93 mm width.

Code Item €

AS 01 017 Flag type bracket set 80.00

Installation kit: Brackets + accessories

Code Item €

AS 01 510 / 517AS 01 509 / 518

• 3 positions bracket set length 400x400 mm• Kit of 4 shock absorbers with screws• Wall fixing dowels• 3 meters insulated copper pipe

with flared joint and nutAssembly kit 1/4"-3/8" (Splits up to 3,600 W)Assembly kit 1/4"-1/2" (Splits up to 5,500 W)

60.0070.00

AS 01 519

• Welded bracket set length 450x500 mm• Kit of 4 shock absorbers with screws• 4 screws and dowel M10 x 80• Maximum weight 150 kg. (total)• 3 meters insulated copper pipe

with flared joint and nutAssembly kit 3/8"-5/8" (Splits up to 16,000 W) 85.00

DIMENS.mm A B

Long 500 900

Extra long 500 1100

Folded up to 960




Inverted bracket- 2 mm metal sheet.- Ø11 mm wall fixing drills.

- Small model: 4 drills.- Other models: 5 drills.

Code Item €

AS 01 065AS 01 066AS 01 067AS 01 068

• Painted in cream epoxy-polyester• Supplied in cardboard boxSMALL model 400MEDIUM model 450BIG model 500SUPER model 560

17.0018.0019.0020.00

Bracket patternwith level

Code Item €

• Painted in epoxy-polyester• Includes: LEVEL

4 fixing dowels bag6 fixing dowels/screws bagWall rubber buffer

• Pattern from 800 to 1000 mm

AS 01 125AS 01 126AS 01 123

• 1.5 mm metal sheetSMALL model 400 mmMEDIUM model 450 mmBIG model 500 mm

19.6522.0023.00

AS 01 127• 2 mm metal sheetSUPER model 550 mm 24.00

DIMENS.mm A B

Small 400 400

Medium 450 450

Big 500 520

Super 500 560

DIMENS.mm A B C

Small 400 415 890

Medium 450 340 800

Big 500 340 800

Super 550 340 1000



5


Brackets for facade corners

- 2 mm metal sheet.- 2 drills Ø10x110 machine fixing.- 2 drills Ø11 wall fixing.- 1 central drill Ø11 to avoid opening.- 1 drill Ø11 for threaded bar pass of M10.

Code Item €

AS 01 031AS 01 032AS 01 033

• Painted in cream epoxy-polyester• Single cardboard box• Corner with 2 drills Ø11 mmSMALL model (880 mm)MEDIUM model (980 mm)BIG model (1080 mm)

34.0037.0042.00

Brackets for shelf model- 2 mm metal sheet.- 2 fixing drills Ø10x110.- 3 wall fixing drills Ø11.

Code Item €

AS 01 041AS 01 042AS 01 043

• Painted in cream epoxy-polyester• Machine fixing drillsSMALL modelMEDIUM modelBIG model

28.5033.0037.50

Window hook typebracket

- 2 mm metal sheet.- 2 fixing drills Ø10x110.- 3 wall fixing drills Ø11.

Code Item €

AS 01 051AS 01 052AS 01 053

• Painted in cream epoxy-polyester• Provided wrapped with PVC SMALL model 400 x 575MEDIUM model 450 x 675BIG model 560 x 775

31.0032.5035.50

DIMENSIONS B F

Small 880 550

Medium 980 650

Big 1080 750

DIMENSIONS A B

Small 400 155

Medium 460 210

Big 530 285

DIMENSIONS A B F

Small 575 400 140

Medium 675 460 185

Big 775 560 290




Adjustable ground brackets

Note: This bracket together withanti-vibrators S-40 (AV 01 020)allows saving any surfaceunevenness.

Code Item €

• Painted in cream epoxy-polyester• 2 mm metal sheet• Cardboard box packing with set

HEIGHT 250 mm (A)

AS 01 081AS 01 082AS 01 083

SMALL model 400 mmMEDIUM model 450 mmBIG model 520 mm

25.5026.7527.95

HEIGHT 400 mm (A)

AS 01 181AS 01 182AS 01 183

SMALL model 400 mmMEDIUM model 450 mmBIG model 520 mm

31.5033.9535.20

Bench type brackets- Painted in cream epoxy-polyester.- 2 mm metal sheet.- Adjustable base width-length.- Supports up to 150 kg.

Code Item €

AS 01 037AS 01 038

• Includes anti-vibrators and galvanized boltfor unit assembly

SMALL model 380 mmMEDIUM model 480 mm

55.0070.00

Bracket for ceiling suspension equipment

Code Item €

AS 01 025AS 01 026

• Painted in cream epoxy-polyester• Adjustable widthMedium model «TRM»Big model «TRG»

55.0060.00

BRACKET FOR ROOFOR SLOPING FLOOR

Code Item €

AS 01 085

• To install on roofs or sloping floors• Allows adjusting inclination from 20 to 38°• Adjustable width pattern: 430 to 800 mm• Galvanized steel and polyester epoxy painted• Bag with screws• 200 to 380 mm depthRoof or sloping surface universal support 69.68

Model A (adjustable)mm

B (adjustable)mm

Cmm

Dmm

TRM 500 to 800 150 to 350 625 450

TRG 600 to 1000 200 to 400 725 500

DIMENSIONS A B C

Small 800 380 400

Medium 850 480 400

DIMENSIONS B F

Small 400 120

Medium 460 165

Big 520 235



7


Ceilingbrackets- 2 mm metal sheet.- 2 ceiling drills Ø11

fixing through rod.- 1 central drill Ø11.

Code Item €

AS 01 021AS 01 022AS 01 023

• Painted in cream epoxy-polyester• Supplied in individual package

SMALL model «TP»MEDIUM model «TM»BIG model «TG»

25.0026.4028.40

Anti-rain visors

Code Item A (mm) B (mm) €

• Painted in cream epoxy-polyester

WINDOW TYPE

AS 01 077AS 01 078AS 01 079

SMALL visorMEDIUM visorBIG visor

500 600 700

400500550

33.3540.1043.40

SPLIT TYPE

AS 01 177AS 01 178AS 01 179

SMALL visorMEDIUM visorBIG visor

90010001100

400500550

70.2074.5082.50

Note: Please check availability for any other size.

ANTI-VIBRATION SLAB FOR MACHINES ASSEMBLYCode Item Weight

kg.Max. load

kg. €

MATERIALS:• Expanded polystyrene core• Reinforced fiber with cement coating• External cement coating

FEATURES: • Resistant to external elements• Extreme temperatures• UV rays

ULTRALITE

AS 01 106 Plate 400 x 900 x 51 mm 5 343 40.80

Expanded polystyrene core (EPS)

Reinforced fiberwith cement

coatingExternal coating cement finishing

DIMENSIONS B F

Small 880 550

Medium 980 640

Big 1080 730



ADJUSTABLE UNIVERSAL FRAMES

“Lock ‘n’ Load” basic frame

Code Item €

• Easy to install• Galvanized steel frame with reinforced plastic

connectors• 3 different heights and tower type frame• Totally adjustable bars• Feet of 200 x 200 mm• Includes 4 antivibrators• Max. load: 150 kg

AS 01 170AS 01 171AS 01 172AS 01 173

Frame 1096 x 767 x 305 mm (W x D x H)Frame 1096 x 767 x 450 mm (W x D x H)Frame 1096 x 767 x 600 mm (W x D x H)Frame tower type 1096 x 767 x (305 +1426) mm (W x D x H)

165.00195.00210.00355.00

Standard frame

Code Item Max. loadkg €

• Galvanized steel frame• Adjustable height between 290~400 mm• Totally adjustable bars• Feet of 305 x 305 mm

AS 01 101

AS 01 102

AS 01 103

Frame 1000 x 1200 x (290~400) mm (W x D x H)Frame 2000 x 1200 x (290~400) mm (W x D x H)Frame 3000 x 1200 x (290~400) mm (W x D x H)

500

1000

1500

482.00

729.00

1,037.00

ALL INONE BOX!

Easy set up Adjustable height Detachable feetFeet can be individually removed for eventual ceiling reparations,without removing the devices.

AS 01 101AS 01 103

AS 01 102

Dimensions (mm) X Z

AS 01 101 1280 620

AS 01 102 2280 645

AS 01 103 3280 546



9

ADJUSTABLE UNIVERSAL FRAMESMulti frame

Code Item €

• Single measure galvanized steel frame,expandable to the desired measure throughthe extension kit

• Adjustable height between 335~440 mm• Totally adjustable bars• Feet of 305 x 305 mm• Max. load: 500 kg

AS 01 104AS 01 105

Frame 1000 x 1200 x (335~440) mm (W x D x H)Extension kit 1000 x 1200 x (335~440) mm (W x D x H)

515.00300.00

BASE FOR PROFILE SUPPORTSCode Item €

SUPPORT PROFILE BASE

AS 01 120 • Base 300 x 300• Includes assembly levels• Allows profile 41 x 41 (CA12071)• Can be leveled with anti-vibrator S40 (AV01020)• Working temperature: -10 to +80 °C 28.00

ACCESORIES

CA 12 071CA 12 003CA 12 005CA 12 010CA 12 015CA 12 016AI 21 108AI 21 035

PF40 profile (41 x 41 x 2,5)Assembly corner 90° ANGP 90Assembly corner 45° ANGP 45Threaded cursor M10 DR 10Screw M10 x 16 BU 10Screw with cursor DM 10Zinc nut M10Zinc washer M10

Bar 2 mBag 10 pcs.Bag 10 pcs.Bag 10 pcs.Bag 10 pcs.Bag 10 pcs.Bag 100 pcs.Bag 100 pcs.

26.50/bar51.30/bag50.25/bag6.33/bag7.80/bag

31.20/bag11.23/bag3.21/bag

Assembly examples:

PF40 ANGP45°

With anti-vibrator

DM 10DM 8

DR 10

Dimensions (mm) X Z

AS 01 104 1265 655

AS 01 105 1000 745

AS 01 104

AS 01 105



FEET SUPPORTS FOR OUTDOOR UNIT

“TerraSoport” feet brackets for floor

Code Item Box content €/pc.

“TerraSoport” BRACKETS

AS 01 790AS 01 791AS 01 792AS 01 793AS 01 794

• Black or cream colored hard PVC• Allowable load up to 140 kg per foot• Includes: Set of M10 screws and nutsPRN 350 length 350 BLACKPRN 450 length 450 BLACKPRN 1000 length 1000 BLACKPRB 350 length 350 CREAMPRB 450 length 450 CREAM

1212 21212

6.257.80

16.126.257.80

ACCESORIES

AS 01 797AS 01 798AS 01 799

Galvanized fixing plate with screwsBLACK colored side coverCREAM colored side cover

4 4 4

4.141.201.20

“EcoSoport” feet bracket

Code Item Box content €/pc.

“EcoSoport” BRACKETS

AS 01 771AS 01 772AS 01 773

• Cream colored hard PVC• Supports up to 120 kg each foot• Including: Screw set and M8 nutsPRE length 350 mmPRE length 450 mmPRE length 1000 mm

2424 4

3.504.15

10.50

ACCESSORY

AS 01 775 CREAM side cover 24 0.96

Anti-vibration base for floor

Code Item Loadkg. €

AS 01 251AS 01 252AS 01 253

• Set of 2 bases• Equipped with levels in both sides• Equipped with fixing screwsLength 250 mmLength 450 mmLength 600 mm

160+160260+260470+470

34.0056.0078.00

AS 01 154• Single unit baseLength 1000 mm 510 55.50

Set of polyamide feet brackets

Code Item €/pc.

AS 01 789• Set of 4 feetSoportEsc set of 4 feet 7.20

Foot for vibration absorbers and screw

Code Item €/pc.

AS 01 788 Set of 4 feet with vibration absorber and screw• Max. load: 500 kg 12.56



11

COMBINABLE BRACKETSFOR DUCTS AND MACHINES

Code Item SupplyBag €

MACHINES ASSEMBLY

CA 12 001CA 12 071

COMBINABLE CHANNEL RAIL• Sendzimir galvanizedPF 30.1 Channel rail 32 x 20 x 2.5PF 40 Channel rail 41 x 41 x 2.5

2 m2 m

21.61/bar26.50/bar

CA 12 003CA 12 005

MOUNTING CORNERSANGP 90 (90o)ANGP 45 (45o)

10 pcs.10 pcs.

51.30/bar50.25/bar

CA 12 010THREADED CURSOR M10DR 10 10 pcs. 6.33/bag

CA 12 015SCREW M10 x 16BU 10 10 pcs. 7.80/bag

CA 12 016SCREW WITH CURSORDM 10 10 pcs. 31.20/bag

CA 12 091ANTIVIBRATING RUBBER CHANNEL RAILPFG 10 m 75.50/roll

AI 21 108 ZINC NUT M10 100 pcs. 11.23/bag

AI 21 035 ZINC WASHER M10 100 pcs. 3.21/bag

DUCT ASSEMBLY

CA 12 051

COMBINABLE OUTLINE• GalvanizedPF 30 30 x 15 x 1.5 outline 2 m 18.19/bar

CA 12 053CA 12 055

MOUNTING CORNERANG 90 (90°)ANG 45 (45°)

10 pcs.10 pcs.

37.70/bag37.70/bag

CA 12 060THREADED CURSOR M8DR 8 10 pcs. 5.80/bag

CA 12 065SCREW WITH THREADED RING M8BU 8 10 pcs. 3.68/bag

CA 12 066SCREW WITH CURSOR M8DM 8 10 pcs. 30.78/bag

CA 12 091ANTIVIBRATING RUBBER CHANNEL RAILPFG 10 m 75.50/roll

AI 21 106 GALVANIZED NUT M8 100 pcs. 3.70/bag

AI 21 034 GALVANIZED WASHER M8 100 pcs. 2.10/bag

WALL CHANNEL RAIL ASSEMBLY

CA 12 081

CA 12 082

SUPPORTING SHELF PF AND PF1PA Length 80 mmSUPPORTING SHELF PF1PA 30 Length 280 mm

1 pc.

1 pc.

5.83

6.14

CA 12 085CA 12 086

WELDED CHANNEL SHELFS• Welded and galvanized• PF1 channel shelfSAT Length 350 mmSAT1 Length 530 mm

1 pc.1 pc.

19.5022.86

CA 12 083CA 12 084

STAMPED GALVANIZED BRACKETS• Thickness: 4 mmSS-35 of 200 x 160 x 35SS-42 of 200 x 160 x 42

10 pcs.10 pcs.

17.4019.50

END COVER (TRIM PROTECTION)• Black plastic

CA 12 087CA 12 088CA 12 089

TPF For PF 30 profileTPF1 For PF 30.1 profileTPF2 For PF 40 profile

1 pc.1 pc.1 pc.

0.600.500.75

PF40

PF 30

ANGP90°

ANGP45°

DM 10DM 8

DR 10

PFG

BU

PA 30

PAPPA

SAT

SS

TPF2

TPF



HARDWARE FOR SPLIT ASSEMBLYCode Item Ø Bit Thread Box content €/pc.

WALL FIXING METALLIC DOWELSAI 07 341AI 07 346AI 07 342AI 07 347AI 07 343AI 07 344

T 9CT 9CLT 11CT 11CLT 14CT 16C

99

11111416

M6 x 45M6 x 60M8 x 60M8 x 80

M10 x 70M12 x 80

20020010010010050

0.300.340.480.570.701.06

AI 07 338AI 07 339

Blister BT10C 4 pcs. M8 x 60 (bit Ø10 mm)Blister BT10CL 4 pcs. M8 x 80 (bit Ø10 mm)

3.644.06

Threaded brass dowelAI 07 351AI 07 353AI 07 354AI 07 355

M4M6M8M10

58

1012

M4M6M8

M10

25010010050

0.150.240.470.80

NYLON DOWELS LP4Great expansive 4-direction dowel to fix on solid or hollow materials. With two reinforcing side wings on the dowel neck to avoid spinning during mounting and to ensure a correct installation on hollow materials. Working temperature between -40 and +80 °C

AI 07 271AI 07 272AI 07 273

Dowel 6 x 30 (100 pcs. box)Dowel 8 x 40 (100 pcs. box)Dowel 10 x 50 (50 pcs. box)

4.146.786.40

FIXING GALVANIZED RODSAI 21 310

AI 21 311

AI 21 312

AI 21 316

Thread M4 x 1000 mm)Thread M4 (bale 100 m)Thread M6 x 1000 mm)Thread M6 (bale 100 m)Thread M8 x 1000 mm)Thread M8 (bale 50 m)Thread M10 x 1000 mm

100

100

50

25

0.930.87/pc.

1.201.06/pc.

2.101.87/pc.

2.30FIXING KEY FOR RODS

AI 21 321

• It allows to install without any damage all kind of threaded rods M6, M8, M10 and M12CBF type 43.62

GALVANIZED IRON NUTAI 21 107AI 21 105AI 21 106AI 21 108AI 21 111

M 4M 6M 8M 10M 12

100100100100100

1.52/bag1.85/bag3.70/bag

11.23/bag14.00/bag

STAINLESS STEEL NUTAI 21 038 Stainless nut M8 100 12.64/bag

RECTANGULAR NUTCA 12 060CA 12 010

Rectangular nut M8Rectangular nut M10

1010

5.80/bag6.33/bag

GALVANIZED IRON WASHERAI 21 031AI 21 033AI 21 034AI 21 035AI 21 036

M 4M 6M 8M 10M 12

100100100100100

0.50/bag0.96/bag2.10/bag3.21/bag2.37/bag

STAINLESS STEEL WASHERAI 21 037 Stainless washer M8 100 4.02/bag

GALVANIZED NOTCHED WASHERAV 01 057AV 01 058

M 8 notchedM 10 notched

0.060.10

GALVANIZED SCREWAS 02 991 Galvanized screw M8 x 30 mm 0.16

HEXAGONAL HEAD SCREWAS 02 235 Galvanized screw 8 x 70 0.18

1 meter



13

BICOMPONENT CHEMICAL ANCHORAGEPOLYESTER RESIN BASED

Code Model €

Application by professional gun of 380 ml. Its great mechanical resistance and its good adherence makes it ideal for threaded rods and studs anchorage in solid and specially in hollow walls, with integration of nylon sieves.

AI 07 251AI 07 252AI 07 253AI 07 254AI 07 255AI 07 256

Polyester resin cartridge 380 ml + 1 mixerProfessional gun 380 mlMixer for resinNylon sieve diam. 12 x 50 mm (10 pcs. box)Nylon sieve diam. 15 x 85 mm (10 pcs. box)Nylon sieve diam. 20 x 85 mm (10 pcs. box)

15.0031.901.14

4.54/box5.06/box6.60/box

METALLIC CHANNEL RAILS SUSPENSION

Code Item Thread Max. loadkg

Max. thickness

channel rail€

VERTICAL SUSPENSION

AS 02 301AS 02 302AS 02 303AS 02 304

MOR 8MOR 10MOR 12MOR 16

M8M10M10M12

120250350550

2123

29.529.5

2.172.843.515.16

OSCILLATING AND INCLINED SUSPENSION

AS 02 305 MOR 2 M10 See picture 24 41.35

MOR 2 applications

SPACER / ENLARGER HOSESCode Model Box cont. €

CYLINDRICAL SPACER HOSE

• To enlarge rods or mount rods with male flanged dowels

AI 21 112AI 21 113AI 21 114

M4 x 20M6 x 20M8 x 25

100200200

0.160.270.32

HOSE FOR ROD ENLARGEMENT

AI 21 323AI 21 324

PV M6PV M8

2.161.64

TELESCOPIC TEMPLATE FOR FIXING UNITSCode Item €

AS 01 099

• It allows a rapid fixing of the units, due to a lengthand wide adjustment of the four fixing points, without the need for the machineMod. DIMA 65.00

Type A C D F G Weight Load

MOR8 21 35 Ø9 M8 21 81 120

MOR10 23 42 Ø11 M10 23 143 250

MOR12 35 54 Ø11 M10 29.5 216 350

MOR16 30 58 Ø13 M12 29.5 318 550

MOR 10MOR 12

MOR 2



FIXING SYSTEMS ON METAL BEAMCode Item kg Thickness

beam (mm)Cont.box €/pc.

BRACKET TO HANG STUDS

CA 12 111CA 12 112CA 12 114CA 12 115

100-210 Thread M6100-211 Thread M8101-210 Thread M6101-211 Thread M8

70707070

1.5-41.5-44-104-10

100100100100

1.071.071.321.32

Kinds of beams

QUICK FIXING SYSTEMSON CONCRETE BEAMS

To hang studs

Code Ref M kg pcs./box €/pc.

CA 12 153CA 12 154

500-211/125500-211/140

M8M8

7070

5050

7.787.78

Assembly example:

FIXING SYSTEMS ON HOLLOW WALLCode Model Ø Drill Wall

thickness pcs./box €

WITH SCREW

AI 07 361AI 07 363AI 07 365

M5 x 45M6 x 45M8 x 61

111313

6 - 136 - 133 - 16

100100100

0.750.731.12

WITHOUT SCREW

• Ideal for the vaulted ducts mounting through studs

AI 07 374AI 07 376AI 07 378AI 07 381AI 07 383

M5 x 45M6 x 45M6 x 71M8 x 61M8 x 73

1113131313

6 - 13 6 - 1316 - 32 3 - 1616 - 32

100100100100100

0.720.610.770.851.03

PINCER FOR DOWEL

AI 07 391 Mod. 360000 to be used with M4, M5, M6and M8 threads 54.00

Ref. A (mm) B (mm) M (mm)

100-210 1.5-4 18 6

100-211 1.5-4 18 8

101-210 4-10 25 6

101-211 4-10 25 8



15

SPLITS ASSEMBLY BAGSCode Item €

FIXING BASIC BAGAS 02 201 B1 type contains:

6 electrogalvanized metal dowels T11C4 galvanized screws M8 x 304 galvanized nuts M84 galvanized washers M84 notched washers M8 4.20

ECONOMIC WALL FIXING BAGAS 02 202 B2 type contains: 6 dowels Ø10 x 60

6 hexagonal head screws Ø8x70 6 washers Ø8x17PACK 100 bags

2.602.30

SIMPLE WALL FIXING BAGAS 02 203 B0 type contains: 6 dowels Ø10 x 50

6 hexagonal head screws Ø8x50PACK 100 bags

1.851.60

BASIC SHOCK-ABSORPTION BAGAS 02 211 B3 type contains: 4 antiv. A-35b (8 to 30 kg) soft grey

8 galvanized nuts M8 8 galvanized washers M8PACK 100 bags

2.752.50

AS 02 212

AS 02 112

B4 type contains: The same as B-3 but with antivibrators A-35 (12 - 50 kg) blackB4/N type (neutral bag)PACK 100 bags

2.002.001.50

AS 02 213

AS 02 113

B5 type contains: The same as B-3 but with antivibrators A-45 (12 - 85 kg)B5/N type (neutral bag)PACK 100 bags

3.003.002.60

AS 02 111 B6 type contains: 4 antivib. A-27 (8 to 25 kg) black 8 galvanized nuts M8 8 galvanized washers M8PACK 100 bags

1.601.40

COMPLETE SHOCK-ABSORPTION AND FIXING BAGSAS 02 221 B7 type contains:

6 electrogalvanized metal dowels T11C4 soft grey antivibrators A-35b (8 to 30 kg)8 galvanized nuts M88 galvanized washers M8 7.50

AS 02 222 B8 type contains: The same as B-7 but also withantivibrators A-35 (12 - 50 kg) black 7.12

AS 02 223 B9 type contains: The same as B-7 but also withantivibrators A-45 (12 - 85 kg) 9.50

FLOOR BAGAS 02 224 B11 type contains: 4 complete shock-absorber S-30

with nuts and washers M8PACK 100 bags

2.602.20

AS 02 225

AS 02 125

B10 type contains: 4 complete shock-absorbers S40with nuts and washers M8Type B10/N (neutral bag)PACK 100 bags

2.402.402.00

AS 02 226

AS 02 126

B12 type contains: 4 complete shock-absorbers S60with nuts and washers M10Type B12/N (neutral bag)PACK 50 bagsPACK 100 bags

5.505.505.004.50

BAG FOR GROUND WITH SEPARATIONAS 02 288 B15 type contains: 4 shock-absorbers ST03 of 75 mm

with nuts and washers 9.50AS 02 289 B16 type contains: 4 shock-absorbers ST04 of 100 mm

height with nuts and washers 11.00

* NEUTRAL bags only for WHOLESALE clients.

BASIC FIXING BAG

COMPLETE BAG

FLOOR BAG

ECONOMIC FIXING BAG

SIMPLE BAG

SCHOCK ABSORPTION BAG

ELEVATION BAG



COVERING DUCT FORAIR-CONDITIONER PIPES

Code Item Box content €

WHITE DUCT

AS 03 251AS 03 252AS 03 241AS 03 255AS 03 253AS 03 254

Duct CB 60 x 40Duct CB 80 x 40Duct CB 100 x 40Duct CB 60 x 60Duct CB 80 x 60Duct CB 100 x 60

40/m32/m24/m32/m24/m18/m

5.78/m8.16/m

10.06/m7.82/m8.40/m

10.33/m

FLAT CORNER 90°

AS 03 256AS 03 257AS 03 242AS 03 260AS 03 258AS 03 259

Corner AP 60 x 40Corner AP 80 x 40Corner AP 100 x 40Corner AP 60 x 60Corner AP 80 x 60Corner AP 100 x 60

101010101010

3.333.944.273.944.104.61

INNER CORNER 90°

AS 03 261AS 03 262AS 03 243AS 03 265AS 03 263AS 03 264

Corner AI 60 x 40Corner AI 80 x 40Corner AI 100 x 40Corner AI 60 x 60Corner AI 80 x 60Corner AI 100 x 60

101010101010

3.453.523.933.673.894.02

OUTER CORNER 90°

AS 03 266AS 03 267AS 03 244AS 03 270AS 03 268AS 03 269

Corner AE 60 x 40Corner AE 80 x 40Corner AE 100 x 40Corner AE 60 x 60Corner AE 80 x 60Corner AE 100 x 60

10108

10108

3.453.523.933.673.894.02

END COVER

AS 03 271AS 03 272AS 03 245AS 03 275AS 03 273AS 03 274

Cover TF 60 x 40Cover TF 80 x 40Cover TF 100 x 40Cover TF 60 x 60Cover TF 80 x 60Cover TF 100 x 60

202020202020

1.962.252.682.372.602.92

COVER JOINT TRIM

AS 03 276AS 03 277AS 03 278

Cover joint EJ 60Cover joint EJ 80Cover joint EJ 100

202020

0.951.061.13

DUCT WITH PIPE PROTECTIONCode Item Box content €/m

WHITE DUCT

AS 03 206AS 03 207

Duct 60-120 BDuct 80-120 B

16 m12 m

15.6917.68

AS 03 501AS 03 811AS 03 511

Duct 25-25Duct 30-25 BDuct 35-30

64 m80 m64 m

2.504.573.95

White duct

Flat corner 90°

Inner corner 90°

End cover

Cover joint trim

Outer corner 90°

Copper pipeInsulation

Tube forcondensates



17


- High capacity.- White color RAL 9010.


120x60 DUCT

AS 03 001AS 03 002AS 03 003AS 03 004AS 03 005

TA-EN 120x60 ductOuter cornerInner cornerFlat cornerEnd cover

161010105

14.95/m7.607.60

13.463.42

150x60 DUCT

AS 03 011AS 03 012AS 03 013AS 03 014AS 03 015


125545

27.05/m10.7610.7629.643.52

150x80 DUCT

AS 03 021AS 03 022AS 03 023AS 03 024AS 03 025


125545

33.56/m18.9818.9831.724.80

200x80 DUCT

AS 03 031AS 03 032AS 03 033AS 03 034AS 03 035


84445

47.38/m19.8419.8442.546.08

Flat corner 90°

Inner corner 90°

End cover

Outer corner 90°

BIGDIMENSIONS



COVERING DUCT WITHRETAINER PIPES

- Round corners.- RAL 9001 color.- Working temp. range: from -20 °C to +60 °C.


DUCTAS 03 601AS 03 602AS 03 603AS 03 604AS 03 605

BC 60 x 45BC 70 x 55BC 80 x 60BC 90 x 65BC 110 x 75

24/m24/m16/m16/m8/m

3.30/m4.10/m4.95/m5.80/m7.10/m

“MIDI” ECONOMICAL DUCTAS 03 608AS 03 609

MD 60 x 45MD 80 x 60

24/m16/m

2.65/m3.95/m

DUCT WITH TRANSPARENT PROTECTING FILMAS 03 616AS 03 617AS 03 618AS 03 619AS 03 620

BCF 60 x 45BCF 70 x 55BCF 80 x 60BCF 90 x 65BCF 110 x 75

24/m24/m16/m16/m8/m

3.50/m4.50/m5.25/m6.10/m7.50/m

FIXING CLAMP FOR PIPESAS 03 611AS 03 612AS 03 613AS 03 614AS 03 615

ST 60ST 70ST 80ST 90ST 110

3030303020

0.270.300.300.340.36

COVER-JOINT FOR DUCT FITTINGAS 03 621AS 03 622AS 03 623AS 03 624AS 03 625

GC 60GC 70GC 80GC 90GC 110

3030303020

1.201.341.651.701.80

INNER CORNERAS 03 631AS 03 632AS 03 633AS 03 634AS 03 635

AI 60 x 45AI 70 x 55AI 80 x 60AI 90 x 65AI 110 x 75

88664

2.332.492.662.843.36

OUTER CORNERAS 03 641AS 03 642AS 03 643AS 03 644AS 03 645

AE 60 x 45AE 70 x 55AE 80 x 60AE 90 x 65AE 110 x 75

1212996

2.332.502.662.843.36

FLAT CURVEAS 03 651AS 03 652AS 03 653AS 03 654AS 03 655

CP 60 x 45CP 70 x 55CP 80 x 60CP 90 x 65CP 110 x 75

1010886

2.662.903.703.944.82

ADJUSTABLE INNER CORNER 80° TO 105°AS 03 715AS 03 716

IR 60 x 45IR 80 x 60

6 pc.4 pc.

2.843.25

ADJUSTABLE OUTER CORNER 70° TO 120°AS 03 720AS 03 721

ER 60 x 45ER 80 x 60

8 pc.6 pc.

2.803.25

ADJUSTABLE FLAT CURVE 65° TO 130°AS 03 724AS 03 725

PR 60 x 45PR 80 x 60

8 pc.6 pc.

3.204.40

*We can have in stock some boxes with different content, please check when buying.

MD

BC

ST

GC

AE

CP

ER

AI

IR

PR

ONLY FULL BOX SALE



19


- Round corners.

Code Item Box content €TERMINAL

AS 03 661AS 03 662AS 03 663AS 03 664AS 03 665

TT 60 x 45TT 70 x 55TT 80 x 60TT 90 x 65TT 110 x 75

121299

10

2.302.402.682.703.36

CORNER WALL ELBOWAS 03 671AS 03 672AS 03 673AS 03 674AS 03 675

CM 60 x 45CM 70 x 55 CM 80 x 60CM 90 x 65CM 110 x 75

99664

3.503.754.344.605.38

WALL PASSAGEAS 03 681AS 03 682AS 03 683AS 03 684AS 03 685

PM 60 x 45PM 70 x 55 PM 80 x 60PM 90 x 65PM 110 x 75

1010888

2.642.783.343.544.44

“T” DERIVATIONAS 03 691AS 03 692AS 03 695

DT 80 x 60DT 90 x 65DT 110 x 75

442

6.687.188.22

REDUCTIONSAS 03 701AS 03 702AS 03 703AS 03 704AS 03 705AS 03 706

RI 80-60RI 80-70RI 90-60RI 90-70RI 110-80RI 110-90

1212121288

1.941.942.102.262.302.68

FLEXIBLE DUCT

AS 03 711AS 03 713

• 590 mm lengthGF 60 x 45GF 80 x 60

64

4.955.64

*We can have in stock some boxes with different content, please check when buying.

FIXING SYSTEMS FOR DUCTSCode Item €

ADHESIVE PUTTY

AS 03 801AS 03 802

• It allows fixing the duct to the wall without dowels• Suitable for PVC and plastic materials• Water and temp. from -20 °C to 110 °C resistant• Quick drying• Permanent elasticityMONTA-KIT 310 ml cartridgeMONTA-KIT direct & quick glue 310 ml cartridge

8.308.75

GUN

AI 19 011• To apply the cartridges of adhesive puttyGun H175 zipper application 4.80

NAIL PLUGS

AS 03 814AS 03 813AS 03 815

• Nylon plug (polyamide)• Bichromatic steel screwDowel 5 x 25 mm 100 pcs. boxesDowel 6 x 35 mm 100 pcs. boxesDowel 6 x 45 mm 100 pcs. boxes

11.83/box14.64/box15.73/box

THREADED NAIL PLUG W/ THREADED HEADAS 03 816AS 03 817

Dowel 6 x 35 mm Thread M6 100 pcs. boxesDowel 8 x 60 mm Thread M8 50 pcs. boxes

22.43/box27.07/box

TT

CM

DT

PM

RI

Ø6

GF

Adhesive putty

Application with gun



DUCT WITH PIPE PROTECTION

- With rounded corners.

Code Item PackingPieces €

DUCTS

AS 03 301AS 03 302AS 03 104AS 03 303

FECR 32-35FECR 40-70FEC 60-70FECR 60-100

48/m40/m32/m32/m

4.14/m5.80/m7.14/m8.75/m

BASE FOR FBC DUCT

AS 03 113AS 03 111AS 03 114AS 03 112

FBC 32-35FBC 40-70FBC 60-70FBC 60-100

48/m40/m32/m32/m

2.63/m4.35/m5.90/m7.14/m

PIPE CLAMPS

AS 03 115AS 03 116AS 03 117

• Includes dowels and screwsFAC (Modular) from Ø 15 to 45FAS (Sanitary) from Ø 10 to 22FAS 26-2 (Sanitary) from Ø 12 to 18

505050

1.381.261.01

JOINT DUCT

AS 03 321AS 03 322AS 03 124AS 03 323

FUR / 33FUR / 47FU / 67FUR / 610

1212/10*

125

1.621.912.012.20

INNER CORNERS

AS 03 325AS 03 326AS 03 128AS 03 327

FAIR / 33FAIR / 47FAI / 67FAIR / 610

108/10*

85

3.083.875.025.19

OUTER CORNERS

AS 03 331AS 03 332AS 03 134AS 03 333

FAER / 33FAER / 47FAE / 67FAER / 610

108/10*

85

3.083.875.025.19

FLAT CORNERS

AS 03 335AS 03 336AS 03 138AS 03 337

FAPR / 33FAPR / 47FAP / 67FAPR / 610

101085

3.214.485.036.04

“T” DERIVATIONS

AS 03 341AS 03 342AS 03 139AS 03 340

FDTR / 33FDTR / 47FDT / 67FDTR / 610

10562

3.133.924.274.38

REDUCTIONS

AS 03 343AS 03 344

FBRR / 47 / 33 (with reduction FDT / 47 - 33)FBRR / 610 / 47 (with reduction of 610 / 47)

82

3.203.76

END COVERS

AS 03 345AS 03 346AS 03 148AS 03 347

FTFR / 33FTFR / 47FTF / 67FTFR / 610

1010105

3.063.543.693.96

SANITARY COVER JOINTS

AS 03 351AS 03 352AS 03 353

FBMR / 33 singleFBSR / 47 doubleFBBR / 47 bathroom

10106

3.904.696.22

"FLUIDQUINT"

FAS

FAS 26-2

FAC

With the FBC base you can work without clamps. Like in a classic duct.

FAS

FAC

FUR

FAPR

FAER

FDTR

FBRR

FBBR

FAIR FTFR



21

DUCT WITH PIPE PROTECTIONCode Item Packing pcs. €

FLAT BASE

• Includes retainers every 50 cm• Nylon clamp fixation available

AS 03 362AS 03 363

FBP-47 for FBP40-70 and 60-70FBP-610 for FBP60-100 duct

40/m32/m

4.24/m6.26/m

STRAIGHT WALL END

AS 03 366AS 03 367

FPMR-47FPMR-610

105

3.664.37

BENDED WALL END

AS 03 372AS 03 373

FPMA-47FPMA-610

105

4.747.05

*Installing the FAC and FAS clamps is not necessary.

AESTHETIC FRONT DUCT

Code Item Packing pcs. €

• Plastic PVC M1• White color• Temperature working range: from -40 °C to 60 °C

MOLDING

AF 15 351AF 15 352

Molding 176 x 74 length 2 mMolding 218 x 109 length 2 m

12/m10/m

34.54/m40.99/m

MOLDING SUPPORTS

AF 15 353AF 15 354

Wall mounted support 176 x 74Wall mounted support 218 x 109

55

7.998.42

DUCT FOR CLAMPCode Item Packing pcs. €

• Round edges• Suitable for FAC, CLIP and FA clamps

DUCT

AS 03 451AS 03 452AS 03 453

Esconduct-clip 40 x 70Esconduct-clip 60 x 70Esconduct-clip 60 x 100

48/m32/m24/m

4.30/m5.00/m7.15/m

CLAMP

AS 03 454• Dowels and screws includedFA (modular) from Ø15 to 45 50 0.98

"FLUIDQUINT"

STRAIGHT wall end

ELBOW wallend

“It keepsthe pipe

horizontal”

Flat horizontal base with “retainer”

Molding

Bracket molding

B 176 214.3

C 2000 2000

A 60 60

B 165.5 206.6

C 75.5 100.5



DRAIN HOSE COVERING DUCTCode Item Box content €

DUCTS

AS 03 501

AS 03 511

• For Ø16 mm condensate pipeDuct 25 x 25• For Ø16-18-20 mm condensate pipeDuct 35 x 30

64/m

64/m

2.50/m

3.95/m

JOINT COVER TRIM

AS 03 502AS 03 512

Joint cover GC 25 x 25Joint cover GC 25 x 30

2020

1.251.85

INNER CORNER

AS 03 503AS 03 513

Corner AI 25 x 25Corner AI 35 x 30

2020

1.251.85

OUTER CORNER

AS 03 504AS 03 514

Corner AE 25 x 25Corner AE 35 x 30

2020

1.251.85

FLAT CORNER

AS 03 505AS 03 515

Corner CP 25 x 25Corner CP 35 x 30

2020

1.251.85

TERMINAL

AS 03 506AS 03 516

Terminal TT 25 x 25Terminal TT 35 x 30

2020

1.251.85

JUNCTION

AS 03 507AS 03 517

Junction RC 25 x 25Junction RC 35 x 30

2020

1.251.85

WALL seal inserts

Code Item €

AS 03 750 • Seal inserts for air conditioning installations• Ø64 mm inner diameter• 350 mm total length can be cut depending on wall dim.• Ø100 mm flange diameter with 3 fixing points 6.50

OUTLET FOR FLAT ROOFSCode Item €

“ROOF INLET”

• For pipe and cable inlets in installations with an outside unit on a flat roof

AS 03 751 Mod. Roof inlet 125 Size: 125 x 125 mm 95.00

AS 03 752 Mod. Roof inlet 250 Size: 250 x 125 mm 105.00

ANGULAR MITER SAW FOR DUCTCode Item €

FOR DUCT 100 mm WIDE

MA 01 307

MA 01 308

Miter saw of 550 mm• Cutter dimension: 550 mm• Base length: 400 mm• Base width: 45 mm• Cutting max. height: 120 mm• 90° cutting width: 110 mm• 45° cutting width: 90 mmSpare blade of 550 mm

109.0027.00

Duct

GC joint cover

RC junctionTT end cover

AI inner corner

CP flat cornerAE outercorner



23

EMBEDED PRE-INSTALLATION BOXESCode Item €/ut

«PRE-AIR» BOXAS 03 901 • Box to build in ABS with white cover

• Dimensions: 350 x 120 x 50 mm25-49 pcs. orders50-99 pcs. orders100+ pcs. orders

5.505.004.504.00

«PRE-AIR» BOX WITH DRAIN• Box to build in ABS with white cover• Collecting tray• Includes 90° elbow and insulating adhesive tape

AS 03 905 NORMAL DRAIN model• Dimensions: 392 x 134 x 55 mm25-49 pcs. orders50-99 pcs. orders100+ pcs. orders

6.255.755.254.75

AS 03 930 PRO DRAIN AND SIPHON model• Dimensions: 396 x 112 x 55 mm• Dimensions: 396 x 154 x 55 mm with drain25-49 pcs. orders50-99 pcs. orders100+ pcs. orders

7.507.006.506.00

SPARE COVERSAS 03 941AS 03 942

PRE-AIR cover 350 x 120 (AS 03 901)PRE-AIR cover 392 x 134 (AS 03 905)

2.642.70

Code Item €/pc.STANDARD BOX (WITHOUT DRAIN)

«PARTITION WALL» BOX 50 mmAS 03 903 • Box to build in ABS with white cover


5.204.504.003.50

«WALL» BOX 65 mmAS 03 902 • Box to build in ABS with white cover


5.805.004.403.80

BOX WITH DRAIN TRAY«PARTITION WALL» BOX “Only 45 mm”

AS 03 910 • Box to build in ABS with white cover• Includes drain tray• Dimensions: 392 x 112 x 45 mm25-49 pcs. orders50-99 pcs. orders100+ pcs. orders

5.004.604.203.85

«WALL» BOX 65 mmAS 03 921AS 03 922

Vertical outletHorizontal outlet• Dimensions: 420 x 95 x 65 mm• Drain outlets Ø 16/20 mm50-99 pcs. orders100+ pcs. orders

6.505.805.30

LONG BOXAS 03 911 • Box for build in ABS with white cover

• Dimensions: 470 x 130 x 67 mm• 2-outlet drain tray with O-rings50-99 pcs. orders100+ pcs. orders

10.809.507.20

SPARE COVERSAS 03 943AS 03 944AS 03 946

PRE-INST cover 430 x 110 (AS 03 902/903)PRE-INST cover 470 x 130 (AS 03 911)ESCOPRE-INST cover 420 x 95 (AS 03 921/922)

2.502.602.90

PRE-AIR

PRE-AIRwith drainage

PRE-AIRPRO

NORMALwithout drainage

FOR PARTITION WALLS

with drainage

LONGwith drainage

WALLwith drainage

WITHOUT

SCREWS

HORIZONTAL

VERTICAL



EMBEDED PRE-INSTALLATION BOXESCode Item €/pc.

«SUPER» BOX

AS 03 904AS 03 906

• Box to build in ABS with white cover• Dimensions: 530 x 90 x 65 mm• Dimensions with tray and cover: 550 x 140 x 65 mm• Tray with connection for drain pipes of Ø16, Ø18 and

Ø20 mmHorizontal outletVertical outlet25-49 pcs. orders50-99 pcs. orders100+ pcs. orders

7.607.607.206.856.65

BOX WITH BUILT-IN SIPHON

AS 03 932

• Box to build in ABS with white cover• Includes siphon with plugs• Orientable siphonDimensions: 480 x 130 x 60 mm 16.84

CONDENSATE SIPHONSCode Item €

ORIENTABLE SIPHON

AS 03 933 • With air purge and plug• Adjustable with joints• Ideal for electric boxes 6.50

HORIZONTAL/VERTICAL SIPHON

AS 03 934 • Ø20 mm inlet (A and C)• Reduced inlet Ø20-18-16 (B)• Ideal for corrugated tubes 9.40

IN-LINE SIPHON

AS 03 939 In-line siphon for condensate pipesVertical assembly 2.50

HIGH CAPACITY SIPHON 3/4"

AS 03 938 Mod. EZT-113B, includes:• Coupling to tray• 180° transparent elbow• Cross connector with plugs• Flexible cleaning brush• Tee with plug 39.35

SIPHON WITH EMBEDED BOX

AS 03 950 • Box of 175 x 260 x 82 mm with siphon boxfor condensates

• Includes O-rings, outlets of Ø 20, 26, 32 mmand cover 21.35

SIPHON WITH EMBEDED BOX AND SHUT-OFF VALVE

AS 03 951 • Transparent siphon box with distributing valve• Includes: surface cover, O-rings

and reducers of Ø20M to Ø24H, Ø20M to Ø25Hand Ø20M to 32H 25.66

SUPERwith drainage

NORMALwithout drainage

Orientablesiphon

Horizontal/verticalsiphon

High capacity siphon 3/4"

Siphon withbuilt-in boxand vane

Siphon withbuilt-in box

In-linesiphon



25

CONDENSATE DRAINAGE

Condensate drain trayCode Item €/pc.

AS 04 001AS 04 002AS 04 003

• Painted in cream epoxy• Ø 14 outlet hose• Cardboard box of 2 piecesSmall model (380 x 875)Big model (450 x 925)Super model (475 x 1100)

32.0034.8037.00

AS 04 021AS 04 022AS 04 023

Small mod. (380 x 875)Big model (450 x 925)Super model (475 x 1100)

32.0034.8037.00

STAINLESS

AS 04 005AS 04 006AS 04 007

• Stainless AISI-304Small model (380 x 875) Stainless big model (450 x 925) Stainless super model (475 x 1100)

78.5082.60

101.50

AS 04 034AS 04 035AS 04 036

Stainless small model (380 x 875) Stainless big model (450 x 925) Stainless super model (475 x 1100)

78.5082.60

101.50

TRAY BRACKET TO BRACKET

AS 04 011AS 04 012AS 04 013

Set of small tray bracketsSet of big tray bracketsSet of super tray brackets

17.8018.8019.80

Plastic condensate collecting tray with bracketsCode Item €

AS 04 016AS 04 017

• Ivory colored plastic tray set with Ø16, 18 and 20 mm vertical tube outlet.

• Includes plastic support set.Small model 790P (790 x 390)Big model 940P (940 x 420)

26.0028.50

Treatment for traysCode Item €

HF 18 411

• Helps to eliminate odors.• Prevents overflow and damages caused by water.• It is not corrosive.• Cleans fur and mud.• It is not toxic.• Use 2 to 4 tablets per month per 3500 W for airconditioning and cooling.PREMIUM 200 (includes 200 tablets). 31.70

DEFLECTOR FOR INDOOR UNITCode Item €

AS 11 032 • White plastic deflector.• Anti-condensation insulation.• Dimensions 690 x 240 mm.• Fixing hardware included. 62.00

Detailbottom outlet

BOTTOM

BOTTOM

LATERAL

LATERAL



CONDENSED FLUID CONTAINERSCode Item €

PLASTIC CONTAINER

AS 04 401AS 04 402

• Condensed fluids to be unloaded where no close drain exists• Blanking plug and handle for transport5 liters container 190 x 135 x 285 mm10 liters container 245 x 165 x 370 mm

2.404.85

WALL FIXING SUPPORT

AS 04 411AS 04 412

• It allows wall fixing. It includes anti-roll bar. Painted in cream epoxy-polyesterWall support for barrel 5 LWall support for barrel 10 L

15.0016.60

WARNING DEVICE FOR CONDENSATECONTAINER FILLING

Code Item €

STOP WATER

AS 04 421

• Electronic unit with sound and light-level controllerto be mounted on the side of the container usingtwo drills.

• Easy to install• Working with battery of 9 VSTOP WATER standard 50.00

AS 04 422

• It is identical to the former one but with a wire of 2.5 m with a connector which allows a liquid-level control of the outdoor tank. STOP WATER with a remote distance probe 62.00

MACHINE DRAIN HOSE ELBOWSCode Item €

AS 04 051

• It can be applied to the main condensers ofthe market, by means of pressure elasticclosing with a joint and 2 stoppers

Ø19 drain hose elbow 2.95

AS 04 053AS 04 052AS 04 054

Ø19 drain hose elbow with jointAdditional stopper for Ø19 drain pipe elbowØ19 joint

2.300.900.86

AS 04 055• Provided with 2 stoppers for Ø32 mm drillØ32 mm drain hose elbow 3.95

AS 04 056 Ø12 and Ø16 universal drain hose elbow for Ø19 mm machine 2.00

CL 93 380 MUNDOCLIMA MUPR-H5 and H5A Series drain hose elbow for Ø 30.6 mm 5.00

CHECK VALVE DRAIN TUBE FOR CONDENSATESCode Item €

AS 06 122AS 06 123

Ø 6/9 mm check valveØ 10/14 mm check valve

6.908.10

STOP WATER

Remote STOP WATER

Ø19

Ø32

Ø19

AS 04 051

AS 04 055

AS 04 056



27

FLEXIBLE DRAIN HOSECode Item €

PLAIN TRANSPARENT DRAIN HOSE

AS 04 100AS 04 101AS 04 102AS 04 103AS 04 105AS 04 104

• Great resistance to the atmospheric agents• It stands temperatures from -10 to 60 °C• Rolls 25 mRoll of Ø 4/6 ultravinyl pipe (condensate pump to drain)Roll of Ø 6/9 ultravinyl pipe (condensate pump to drain)Roll of Ø 10/14 ultravinyl pipe (condensate pump to drain)Roll of Ø 15/20 ultravinyl pipe (machine to drain)Roll of Ø 20/25 ultravinyl pipe (machine to drain)Roll of Ø 25/31 ultravinyl pipe (machine to drain)

3.808.45

17.9533.7544.4056.75

REINFORCED SPIRAL PIPE

AS 04 106AS 04 107AS 04 118AS 04 119

• Flexible PVC pipe, smooth interior shock-adsorption• It holds temperatures from -10 to 60 °C• 25 m rolls BLACKRoll of Ø 13/16 pipeRoll of Ø 16/20 pipeRoll of Ø 20/25 pipeRoll of Ø 26/32 pipe

35.5040.5545.8057.85

AS 04 121AS 04 122AS 04 123AS 04 124

• 50 m rolls WHITERoll of Ø 13/16 pipeRoll of Ø 16/20 pipeRoll of Ø 20/25 pipeRoll of Ø 26/32 pipe

58.0064.0087.00

117.65CORRUGATED PIPE

AS 04 110

AS 04 111

AS 04 113AS 04 109

• Low intensity polyethylene ivory colored• 1 meter stretches• With male/female hoseRoll of 50 m Ø14 pipe Ø16-18 terminalSupply: 10 rolls Roll of 50 m Ø16 pipe Ø18-20 terminalSupply: 10 rolls Roll of 5 m Ø16 pipe Ø18-20 terminalRoll of 50 m Ø20 pipe

34.0028.00/pc.

36.0030.00/pc.

5.7542.00

CORRUGATED PIPE WITH PLAIN INNER SIDE

AS 04 129AS 04 125

• PVC pipe ivory color• Treatment for UV protection (Solar)30 m Ø16 pipe roll30 m Ø20 pipe roll

31.2037.25

TEES FOR CORRUGATED PIPEAS 04 112AS 04 114AS 04 115AS 04 116

“Y” tee of Ø16 for corrugated pipe with purge“Y” tee of Ø20 for corrugated pipe with purge“Y” tee of Ø16-20 parallel for corrugated pipe“Y” tee of Ø16-20 at 45° for corrugated pipes

4.505.502.452.65

AS 04 117 Derivation 3 inlets Ø20 mm and 1 outlet Ø32 mm 8.40FLEXIBLE PIPE ACCESSORIES

AS 04 155AS 04 156AS 04 157

90° elbow for Ø 15/20 pipe90° elbow for Ø 10/14 pipe90° elbow for Ø 6/9 pipe

1.450.751.18

AS 04 161AS 04 162AS 04 170

90° tee for Ø 15/20 pipe90° tee for Ø 10/14 pipe90° tee for Ø 6/9 pipe

0.850.601.15

AS 04 165AS 04 164AS 04 163

“Y” derivation for Ø 15/20 pipe“Y” derivation for Ø 10/14 pipe“Y” derivation for Ø 6/9 pipe

3.572.131.27

AS 04 171AS 04 172AS 04 173

Straight junction for Ø 15/20 pipeStraight junction for Ø 10/14 pipeStraight junction for Ø 6/9 pipe

0.600.550.66

GALVANIZED PIPE CLAMPAS 04 191

AS 04 192

AS 04 193

AS 04 194

Endless Ø 6-16 pipe clamp SingleBox 100 pcs.




0.390.32/pc.

0.440.34/pc.

0.460.36/pc.

0.490.38/pc.

Transparent drain hose

Reinforced spiral

Corrugated pipe

Tee “Y”Ø16 ó Ø20with purge

Tee “Y” Ø16-20 to 45°

Tee “Y” Ø16-20 parallel

Elbow90°

Tee

Y junction3 inlets

Y junction

Clamp clip

Straight fitting



RIGID DRAIN PIPECode Item Pcs. Box €

GREY RIGID PVC PIPEAS 04 201AS 04 202AS 04 203AS 04 204AS 04 205

Pipe of Ø 16 (5 m stretches)Pipe of Ø 20 (5 m stretches)Pipe of Ø 25 (5 m stretches)Pipe of Ø 32 (5 m stretches)Pipe of Ø 40 (5 m stretches)

0.87/m0.84/m1.05/m1.47/m2.00/m

COUPLING HOSEAS 04 211AS 04 212AS 04 213AS 04 214AS 04 215

Ø 16 hoseØ 20 hoseØ 25 hoseØ 32 hoseØ 40 hose

15010010080

160

0.650.650.800.951.10

REDUCING SOCKETAS 04 221AS 04 222AS 04 223AS 04 224

Reduction from Ø 20 to Ø 16Reduction from Ø 25 to Ø 20Reduction from Ø 32 to Ø 25Reduction from Ø 40 to Ø 32

60010010080

0.750.750.901.20

90° ELBOWAS 04 231AS 04 232AS 04 233AS 04 234AS 04 235

Ø 16 elbowØ 20 elbowØ 25 elbowØ 32 elbowØ 40 elbow

300100100100100

0.600.600.751.051.55

45° ELBOWAS 04 241AS 04 242AS 04 243AS 04 244AS 04 245

45° elbow of Ø 1645° elbow of Ø 2045° elbow of Ø 2545° elbow of Ø 3245° elbow of Ø 40

150100100100110

0.851.200.951.301.75

90° TEESAS 04 251AS 04 252AS 04 253AS 04 254AS 04 255

Tee of Ø 16Tee of Ø 20Tee of Ø 25Tee of Ø 32Tee of Ø 40

1501001007080

0.700.751.001.352.10

REDUCING TEESAS 04 261AS 04 262AS 04 263AS 04 264AS 04 265AS 04 266

Tee of Ø 25 graft 20Tee of Ø 32 graft 20Tee of Ø 32 graft 25Tee of Ø 40 graft 20Tee of Ø 40 graft 25Tee of Ø 40 graft 32

100100100908080

1.401.701.802.852.902.95

THREADED HOSE FOR MALE/TO GLUE FOR FEMALEAS 04 272AS 04 273AS 04 274

Hose 20 x 1/2"Hose 25 x 3/4"Hose 32 x 1"

10010080

0.800.901.10

THREADED HOSE FEMALE TO GLUE/TO THREADAS 04 276AS 04 277AS 04 278

Hose 20 x 1/2"Hose 25 x 3/4"Hose 32 x 1"

10010070

1.351.451.55

FEMALE CAPAS 04 256AS 04 257AS 04 258AS 04 259

Ø20 female capØ25 female capØ32 female capØ40 female cap

10010010080

0.600.600.751.15

TUBE GRAFTAS 04 289 PVC tube graft Ø110-125 to Ø32 mm 2.50

TEE SOCKET COLLARAS 04 282AS 04 283AS 04 284AS 04 285

Collar Ø 20 x 1/2"Collar Ø 25 x 1/2"Collar Ø 32 x 1/2"Collar Ø 40 x 1/2"

3.603.603.954.15

GLUEAS 04 291AS 04 293

125 cm³ glue tube500 gr glue can with brush cap

2.609.65

PVC TUBE CUTTER PINCERMA 01 021 Mod. K-42 up to 1-1/2" (42 mm), rack and pinion drive 8.90

Sleeve coupling

Reducing sleeve

45° Elbow

Reducing Tee

Collar

90° Elbow

Tee 90°

Threaded male sleeve

Threaded female sleeve

Branch connection

Trays

Flexible draining tube

Straight fitting 1/2"pipe Ø 15/20

Clamp clip

Intaking fastening 20-1/2"25-1/2"

Elbow Ø 20Ø 25

Can be connectedto any section of the

drainage pipe



29

“WHITE” RIGID DRAIN HOSE WITH JUNCTIONCode Item pcs./box €

• 2 m rigid drain hose• White PVC self-extinguishing• Solar UV protection• For condensates (no pressure)• Rubber gasket as spare part

Ø20 DRAIN HOSE

AS 04 501AS 04 502AS 04 503AS 04 504AS 04 505AS 04 506AS 04 507

Ø20 white drain hoseØ20 white coupling hoseØ20 90° white elbowØ20 45° white elbowØ20 90° white teeØ20 pre-installation white junction Ø20 white clamp

30303030303030

1.851.801.831.832.371.700.55

Ø25 DRAIN HOSE

AS 04 511AS 04 512AS 04 513AS 04 514AS 04 515AS 04 517

Ø25 white drain hoseØ25 white coupling hoseØ25 90° white elbowØ25 45° white elbowØ25 90° white teeØ25 white clip clamp

603030303025

2.202.102.302.302.600.65

Ø32 DRAIN HOSE

AS 04 521AS 04 522AS 04 523AS 04 524AS 04 525AS 04 527

Ø32 white pipeØ32 white coupling hoseØ32 90° white elbowØ32 45° white elbowØ32 90° white teeØ32 white clip clamp

123030303030

2.602.402.532.603.000.70

REDUCTIONS

AS 04 531AS 04 532

Ø25 to Ø20 white reductionØ32 to Ø25-Ø20 white reduction

3030

1.731.93

Rigid/corrugated tube connector

Code Item €

AS 03 935AS 03 936AS 03 937

• Connector with Ø14-16-18 and 20 (A) reductions for corrugated tube (B)

Ø16 connector to YELLOW tubeØ18 connector to RED tubeØ20 connector to BLUE tube

2.452.452.45

Fixing for drain hose

Code Item Pieces €

FIXING CLAMP FOR PIPE OR WIRE

AS 04 300AS 04 302

AS 04 301

AS 04 311AS 04 312AS 04 313AS 04 315AS 04 316AS 04 317

Adhesive plate for clampTP 6/C black screw dowelTP 6/C 500 piecesTP 8/C black screw dowelTP 8/C 500 piecesBlack clamp 100x2.5 - up to Ø25Black clamp 200x4.5 - up to Ø47Black clamp 280x4.8 - up to Ø81White clamp 100x2.5 - up to Ø25White clamp 200x4.5 - up to Ø47White clamp 280x4.8 - up to Ø81

100100

5 boxes100

5 boxes100/bag100/bag100/bag100/bag100/bag100/bag

0.220.07

0.06/pc.0.08

0.07/pc.0.73/bag3.96/bag5.68/bag0.73/bag3.96/bag5.68/bag

CA 07 969 ATC8 Pliers for clamping and cutting (up to 8 mm) 40.00

Sleeve coupling

Elbow45°

Pre-installationfitting

Dowel

Clamp

Adhesive plate

A A A

B B B

Clampclip

Tee90°

Elbow90°

ATC8



ANTI-ODOR VALVECode Item €

VALVE TO AVOID BAD ODORS

AS 04 131

• It acts as a siphon retaining the odors coming from the drainage pipe when entering the reflux of bad odors• Joint Ø14-16 mm• Adapter diameter Ø14 and Ø16 mm• Dimensions length 72 mm, outer diam. 21 mmMod. ESV-146 9.85

FIXING FOR DRAIN HOSECode Item Pieces €

POLYAMIDE SIMPLE STAPLE WITH PLUG

AS 04 321AS 04 322AS 04 323AS 04 325

Fix-Ring Ø 16 BlackFix-Ring Ø 18 BlackFix-Ring Ø 20 BlackFix-Ring Ø 25 Black

100100100100

0.410.430.440.64

GALVANIZED METAL SIMPLE STAPLE

AS 04 331AS 04 333AS 04 335AS 04 337AS 04 339

Ø 16 stapleØ 20 stapleØ 25 stapleØ 32 stapleØ 40 staple

10010010010050

0.100.120.140.170.22

OUTDOOR CONDENSATION EVAPORATORCode Item Max. evaporation

flow €

• Power supply 110/220 V and consumption 2 Amp.• Possibility of series mounting

AS 06 933 Condensate evaporator 1.5 l/h 88.00

Quick indicative selection table:Cooling capacity Dehumidification capacity Recommended selection

2000 W 0.8 l/h 1 pc. x AS 06 933

2500 W 1.2 l/h 1 pc. x AS 06 933

3500 W 1.6 l/h 2 pcs. x AS 06 933

4500 W 2 l/h 2 pcs. x AS 06 933

6000 W 3 l/h 3 pcs. x AS 06 933

DOES NOT

REQUIRE

DRAINING PIPE

FIX WITH VINYL TAPE

FIX WITH VINYL TAPE

FOR 14 mm FOR 16 mm

Drainagepipe

Adapter

InletAir pass* Avoid

obstruction

InletAir pass* Avoid

obstruction

Drainagepipe

Fix-ring

Staple



31

CONDENSATE PUMP WITH VISIBLETANK INSTALLATION

Code Item Max. flow €

«MASTONE» PUMP

AS 06 801 • 300 cm3 tank• 2 m elevation• Ø6 x 4 tube outlet• Light function controller• Power: 10 W1 piece+ than 10 pieces

30 l/h

65.0060.00/pc.

«MASTONE PLUS» PUMP

AS 06 803 • 550 cm3 tank• Normal height 1.5 m; max. 3 m• Ø6 x 4 tube outlet• Power: 23 W• Sound level: 40 dB• Weight: 1.6 kg• Dimensions: 180 x 150 x 105 mm1 piece+ than 10 pieces

60 l/h

65.0060.00/pc.


«FLOWITA» PUMP

AS 06 960 • 185 ml tank• Height: 10 m• Dimensions: 135 x 106.5 x 55 mm• Power: 16W to 230 V-50 Hz• Thermal protection: 70 °C• Sound level: 36 dB (A)1 piece+ than 10 pieces

12 l/h

61.0056.00/pc.

«FLOWATCH VISION» PUMP

AS 06 965 • Minitank pump• It can be mounted HORIZONTALLY or VERTICALLY• Dimensions: 230 x 62 x 55 mm• Power: 19 W• Sound level: < 21 dB (A)• Maximum height: 10 m

15 l/h

95.00


«MINIBLANC DELUXE» PUMP

AS 06 141 • Dimensions: 115 x 182 x 55 mm• Weight: 460 g• Ø 21 mm input• Ø 6 mm outlet tube• Max. height: 12 m• Power: 16 W• Sound level: 21dB (A)

12 l/h

85.00

«OMEGA PACK» PUMP

AS 06 004 • Dimensions: 327 x 57 x 63.5 mm• Weight: 0.73 kg• Maximum height: 10 m• Power: 14 W• Sound level: 22dB (A)

20 l/h

143.00

NOThe solution to the

tedious condensates!

MASTONE

MASTONEPLUS

MASTONE MASTONE PLUS

FLOWATCH Vision(4 installations shown)

FLOWATCH Vision

FLOWITA

MINIBLANCDELUXE

OMEGAPACK



CONDENSATE REMOVAL MINIPUMPSCode Item Max.

flow €

Easy 10, SI 2750, SI 30 and SI 33 models share the following features:• 3-level float:

– Start 16 mm– Stop 11 mm– Alarm 19 mm

• Ø 6/9 discharge tube (see AS 04 101)• Detector dimensions: 55 x 38 x 37.5 mm

«EASY 10» MINI PUMPSpecial for Splits up to 10 kW

AS 06 003 Mod. EASY 10• Maximum elevation: 6 meters• Maximum intake: 1,5 meter• Power: 18 W at 230 V 50/60 Hz• Sound level: ≤ 30 dB (A)• Pump dimensions: 58 x 42 x 55 mm1 piece5 pieces

10 l/h*

85.0082.00/pc.

«SI 2750» MINI PUMPSpecial for Splits up to 10 kW

AS 06 001 Mod. SI 2750• Maximum elevation: 6 meters• Maximum intake: 2 meter• Power: 18 W at 230 V 50/60 Hz• Sound level: ≤ 32 dB (A)• Pump dimensions: 76 x 38 x 61 mm1 piece5 pieces

10 l/h*

110.00105.00/pc.

«SI 20» MINI PUMP

AS 06 002 Mod. SI 20• Maximum elevation: 10 m (Flow rate: 4 l/h)• Maximum intake: 3 meters• Power: 14 W at 230 V 50/60 Hz• Sound level: ≤ 25 dB (A)• Pump dimensions: 136 x 38 x 37 mm

20 l/h*

137.00

«SI 30» SILENT MINI PUMPSpecial for Splits up to 20 kW

AS 06 032 • Maximum elevation: 10 meters• Maximum intake: 3 meters• Power: 14 W at 230 V 50/60 Hz• Sound level: ≤ 20 dB (A)• Pump dimensions: 60 x 66 x 43.5 mm

20 l/h*130.00

AS 06 010 Silent mini pump «SI 30 Detect+»• Electronic probe without float 155.00

«SI 33» SILENT MINI PUMPSpecial Cassette and Splits from 20 to 30 kW

AS 06 007 • Maximum elevation: 13 meters• Maximum intake: 4 meters• Power: 21 W at 230 V 50/60 kW• Sound level: 34 dB (A)

30 l/h*

158.00

«SI 10 Univers’L Nivel Integrado» MINI PUMPSpecial for Splits up to 20 kW

AS 06 018 Detection levels: – Operation 18 mm – Stop 13 mm – Alarm 21 mm• Maximum elevation: 10 meters• Power: 14 W at 230 V 50/60 Hz• Sound level: 22 dB (A)• Direct connection to side tray• Pump dimensions: 77 x 66 x 43.5 mm

20 l/h*

118.00

*Flow rate without pressure

EASY 10

SI 2750

3-levelfloat typedetection

AlarmStartStop

SI 30 Detect+

SI 30 /SI 33

SI 10 integrated level

SI 20



33

CONDENSATE PUMPSCode Item Max.

flow €

BUILT- PUMP WITH TANK «SI 60»Special splits up to 20 kW

AS 06 012 Mod. SI 60Water levels: – Start 28 mm – Stop 24 mm – Alarm 35 mm• Maximum elevation: 10 meters• Power: 14 W at 230 V 50/60 Hz• Sound level: 38 dB (A)• Dimensions: 88 x 168 x 90 mm.• Upper or side inlet to the condenser• Ø 6/9 discharge tube (see AS 04 101)

20 l/h*

167.00PUMP WITH TANK «SI 61»

Special condensing boiler splits up to 50 kW and air conditioners up to 10 kWAS 06 017 Mod. SI 61

Water levels: – Start 28 mm – Stop 24 mm – Alarm 35 mm• Tank 0,37 liters:• Maximum elevation: 4 meters• Power: 10 W at 230 V 50/60 Hz• Sound level: 27 dB (A)• Dimensions: 88 x 168 x 90 mm

10 l/h*

170.00CENTRIFUGAL PUMP WITH TANK «SI 1805»

Special for conditioners and condensing gas boilers• Three level float: Start / Stop / Alarm• Maximum elevation: 5.4 meters• Power: 90 W at 230 V 50/60 Hz• Condensate temperature and acidity: 65 °C, pH 3.4• 0.5 l tank• Sound level: 47 dB (A)• Dimensions: 195 x 130 x 122 mm

CONDENSATIONBOILERS

>3.4 pH

AS 06 013 Mod. SI 1805 500 l/h* 103.00CENTRIFUGAL PUMP WITH TANK «SI 82»

Special for conditioners and condensing gas boilers• Three level float: Start / Stop / Alarm• Maximum elevation: 5 meters• Power: 70 W at 230 V 50 Hz• Condensate temperature and acidity: 65 °C, pH 2.5• Tank: 2 liters• Sound level: 45 dB (A)• Dimensions: 171 x 279 x 130 mm

CONDENSATIONBOILERS

>2.5 pH

AS 06 016 Mod. SI 82 500 l/h* 92.00PERISTALTIC PUMPS

• Maximum intake: 2 meters• Maximum discharge: 12 meters• Power: 11 W• Sound level 30 dB (A)• Dimensions: 109 x 110 x 91 mm

AS 06 021 Mod. PE-5000Activated through compressor signal(without detection)

6 l/h

175.00AS 06 022 Mod. PE-5100

Activated through temperature sensors 220.00AS 06 023 Mod. PE-5200

Activated through a detection block of float(included) 190.00

AS 06 025 Replacement tube for peristaltic pumps 20.00BIG FLOW PERISTALTIC PUMP

AS 06 024 Mod. PE 6250• Designed to remove dirty water• Maximum intake: 2 meters• Maximum discharge: 10 meters• Motor power: 66 W• Dimensions: 134 x 171 x 282

25 l/h

380.00

*Flow rate without pressure

SI 60

SI 1805

SI 82

PE 5200

PE 6250

PE 5000

SI 61




flow €

PUMP FOR CASSETTES

AS 06 033 Mod. SI 2052• Maximum elevation: 0.90 m (24 l/h)• Power: 14 W• Sound level: 30 dB (A) at 1 meter• Including 1 level detection block• Condensate outlet tube Ø10/14• Dimensions: 88 x 75 x 94

70 l/h

78.50

IN LINE PUMP WITH «DELTA PACK» DUCTFor conditioners up to 20 kW

AS 06 035 • Detection levels: – Start 18 mm – Stop 12 mm – Alarm 21 mm• Maximum elevation: 10 m• Power: 14 W at 230 V 50/60 Hz• Sound level: 22 dB (A)• Hood dimensions: 165 x 165 x 80• Duct dimensions: 750 x 80 x 60• Reversible assembly on the unit right

or left side of the machine• Ivory color (RAL 9001)

20 l/h

130.00

ACCESORIES

AS 06 041AS 06 042AS 06 043AS 06 044AS 06 045AS 06 046

AS 06 047AS 06 051AS 06 052AS 06 053AS 06 054

AS 06 059

Ø17 to Ø22 pipe reductionØ17 to Ø32 pipe reductionØ17 to Ø32 pipe reduction with flow reductionSelf-fixing fitting for Ø6/9 condensate tubeSelf-adhesive fixing base pump with screwsInsulating adhesive with double coat for detection block45 x 32 x 3 mm50 cm rubber tray-pump Extending wire with 3 m connectorExtending wire with 5 m connectorIn-line filter for SI 1730 and SI 2750SI 2750 mounting kit composed of:– Ø 6/9 discharge fitting– Anti-vibration fixing kit– Ø 15 x 15 mm 90° rubber elbow– Ø 15 flexible derived fittingControl switch (to operate an additional alarm)

8.069.96

11.765.245.00

2.747.28

13.5016.807.10

24.1628.75

SPARE PARTS

AS 06 055 SI 2858SI 2750, SI 3080, SI 3100, SI 3200 and PE 5200detection block 57.55

AS 06 025 PE 5002Spare pipe of PE 5000, PE 5100 and PE 5200peristaltic pump 20.00

AS 06 026 PE 5005Spare pipe of PE 6250 peristaltic pump 42.55

Detection block

Delta Pack

SI 2052

Pipe reduction

Insulating adhesive

Assembly kitSI 2750

In-line filter

Extending wirewith connector

Spare pipePE 6250 pump

Control switch

Auto-fixation fitting

Rubbertray-pump



35


flow €

«FLOWATCH 2» PUMP

AS 06 950 • 3-level float• Max. height: 10 meters• Max. intake: 2 m• Pump dimensions: 85 x 28 x 48 mm• Detector dimensions: 78 x 38 x 37 mm• Sound level: 20,2 dB (A)• Power 220 V 50/60 Hz1 piece+ than 5 pieces

15 l/h

92.0087.00/pc.

ASSEMBLY ACCESSORIES

AS 06 951 3-piece assembly set for Flowatch 2• Easy assembly and sound level goes down to 19.7 dB (A) 50 l/h 9.00

«MINI FLOWATCH O» PUMP

AS 06 952 • 3-level float• Max. height: 10 meters• Max. intake: 2 m• Pump dimensions: 91 x 38 x 48 mm• Detector dimensions: 78 x 38 x 37 mm• Sound level: 21 dB (A)• Power 220 V 50/60 Hz

10 l/h

72.00

«MINI FLOWATCH 0» PUMP

AS 06 954 • Max. height: 10 meters• Max. intake: 2 m• Pump dimensions: 70 x 30 x 41 mm• Detector dimensions: 82 x 32 x 39 mm• Power 220 V 50 Hz• Without alarm

10 l/h

58.00

«ECO FLOWATCH» PUMP

AS 06 968 Maximum elevation: 10 meters• Maximum intake: 1.5 m• Pump dimensions: 70 x 30 x 41 mm• Detector dimensions: 82 x 32 x 39 mm• Power 220 V 50/60 Hz• Without alarm

13 l/h

64.80

«MAXI ECO FLOWATCH» PUMP

AS 06 969 Maximum elevation: 10 meters• Maximum intake: 2 m• Pump dimensions: 75 x 41 x 48 mm• Detector dimensions: 82 x 32 x 39 mm• Power: 220 V 50/60 Hz• Without alarm

40 l/h

73.00

CONDENSATE PUMP WITH «FLOWATCH DESIGN» DUCT

AS 06 957 • Maximum elevation: 10 meters• Maximum intake: 1.5 meter• Power: 19W at 230V 50/60Hz• Reversible fixing plate for installation right or

left of the unit.• Waterproof: IP64• Sound level: 20.2 dB (A)• Set including:

– Flowatch 2 pump– 80 x 55 x 800 mm duct– Elbow corner– Trim for wall fixing– Hose pump level– Cable with connector– Fixing screws and dowels

15 l/h

116.00

FLOWATCH 2

FLOWATCH 2Assembly set

MINI FLOWATCH

MINI FLOWATCH 0

ECO FLOWATCH

MAXI ECO FLOWATCH

FLOWATCHDESIGN



CONDENSATE PUMPS

Pumps with condensate tank

Code Item Max.flow €

COMPACT PUMP WITH «SUNNY FLOWATCH»TANK

• IP64 sealed• Dimensions: 180 x 110 x 110 mm• 0.7 liter tank• Power: 220 V 50/60 Hz• Maximum elevation: 10 metros• Sound level: 20.2 dB (A)• Adapter including inputs from Ø6 to 33 mm

AS 06 961 SUNNY FLOWATCH CLIM• Double filtration 15 l/h 89.00

AS 06 962 SUNNY FLOWATCH DUO• For condensing boilers of

2.5 pH max.• Double adapter for condensate inlet 15 l/h 97.00

PUMP WITH TANK«FLOWATCH TANK 1.3 l»

AS 06 956 • Also valid for condensingboilers

• Maximum elevation: 5.5 meters• Tank: 1.3 l• Voltage: 220 V 50/60 Hz• Power: 80 W• Reversible tray• Dimensions: 280 x 130 x 135 mm

788 l/h

CONDENSATIONBOILERS

>2.5 pH

87.50

PUMP WITH TANK«ECO TANK»

• Maximum elevation: 4.6 m• Voltage: 70 W• Power: 200 V 50 Hz• Alarm N.C. of 4 A.• 4 condensate inlets• It supports the acids with pH > 4• Built-in one way valve for Ø9/12 or Ø6/9 mm

pipes

AS 06 966 ECO TANK 1.2• Tank 1.2 liters• Dimensions: 293 x 144 x 114 mm 300 l/h 74.00

AS 06 967 ECO TANK 2.5• Tank 2.5 liters• Dimensions: 293 x 144 x 158 mm 400 l/h 68.40

Code Item €

«MINI TANK» PUMP

AS 06 104 • Recommended maximum height: 15 m (Flow rate: 10 l/h)• Max. flow rate: 35 l/hour to 0 m of elevation• Motor: 0.1 A at 230 V 50/60 Hz• Tank capacity: 0.24 liter• Outlet: Ø6 mm• Height: 69 mm, base: 210 x 89 mm 102.00

OUTDOOR

ASSEMBLY

IP64

SUNNY FLOWATCH CLIM

SUNNY FLOWATCH DUO

FLOWATCH TANK 1.3 L

ECO TANK 1.2

ECO TANK 2.5

MINI TANK



37

CONDENSATE PUMPS

Pumps with condensate tank

Code Item €«HI-FLOW / NEW» PUMP

• Maximum height: 5 m • Max. flow rate: 288 l/h to 0 m height• Motor 0.6 A 230V 50/60 Hz• Sound level: 55 dB (A)• 2 inlets up to Ø27, 1 Ø6 mm outlet

AS 06 101

AS 06 165

HI-FLOW tank 1 l(height: 132, base: 244x148 mm) 1 unit - BLACK5+ unit - BLACK1 unit - WHITE

95.0088.00/pc.97.00/pc.

AS 06 102

AS 06 166

HI-FLOW tank 2 l(height: 164, base: 244x148 mm) 1 unit - BLACK5+ unit - BLACK1 unit - WHITE

95.0088.00/pc

97.00«HI-FLOW» PUMP

• Maximum height: 5 m• Max. flow rate: 288 l/h to 0 m height• Dimensions: 285 x 144 x 134 mm• Sound level: 44 dB(A)• 1.7 lts tank capacity• 2 Inlets Ø 27, outlets of Ø 6/10 mm

AS 06 110 MAX HI-FLOW1 piece5+ pieces

90.0085.00/pc.

«HIGH-LIFT / NEW» PERISTALTIC PUMP• Peristaltic pump• Flow rate: 11 l/h discharge height 12 m• Temperature: 40 °C• Motor: 0.4 A 230 V 50/60 Hz• Safety level with auxiliary circuit to stop device• Sound level: 51 dB (A)

AS 06 105 HIGH-LIFT tank 1 l (Height: 132, base: 244x148 mm) 177.00AS 06 106 HIGH-LIFT tank 2 l (Height: 164, base: 244x148 mm) 187.00

«HEAVY DUTY» HIGH CAPACITY PUMP• Double level: one for the pump operation and another

for safety, with disconnection terminals of the device• Tank capacity: 4 l• 2 inlets up to Ø 40 mm and 1 Ø10 mm outlet

AS 06 107

• Flow rate: 900 l/h• Impulsion height: 7 m• Height: 205, base: 300 x 150 mmHEAVY DUTY 6 191.00

AS 06 108

• Flow rate: 1070 l/h• Impulsion height: 9 m• Height: 265, base: 300 x 150 mmHEAVY DUTY 10 290.00

«Hot Water Tank» hot water pumpsCode Item €

ECONOMY HOT

AS 06 117

• Impulsion height: 6 m• Flow rate: 900 l/h• 4 l plastic tank• Inlet pipe: 2 up to Ø40 mm• Outlet pipe: 1 Ø10 mmECONOMY HOT 448.00

HEAVY DUTY HOT

AS 06 116

• Impulsion height: 15 m• Flow rate: 1800 l/h• 5 l stainless steel tank• Inlet pipe: 2 up to Ø 40 mm• Outlet pipe: 1 up to Ø15 mmHEAVY DUTY HOT 941.00

HIGH-FLOW / NEW

HIGH-LIFT / NEW

HEAVY DUTYECONOMY HOT

HEAVY DUTY HOT

MAX HI-FLOW



PERISTALTIC CONDENSATE PUMPS

Code Item €

«STANDARD» PUPM

AS 06 111 • To run dry, it connects in parallel to the evaporator in cold circuit 177.00

«MECHANICAL» PUMP

AS 06 114 • Includes control level system, mechanical float and 3 m cable for remote control 185.00

«UNIVERSAL» PUMP

AS 06 112 • Includes 2 probes to start according tothe temperature gap (7 °C) between the evaporatorinlet and outlet 211.00

«MK4 WATER SENSOR» PUMP

AS 06 113 • Includes level sensor, once placed on the device, starts or stops the pump only when there is water to remove (5 mm level). 260.00

AS 06 121AS 06 120AS 06 122AS 06 123

Spare silicone pipeGrease can with silicone tube1/4" Ø 6/9 mm check valve3/8" Ø 10/14 mm check valve

18.8027.006.908.10

ANTI-THERMOSYPHON VALVE

AS 06 126 Anti-thermosyphon valve 1/4" pipe Ø6 6.00

CONDENSATE PUMPS WITH GUTTER

Code Item €

«MINI LIME+SILENT» PUMP

AS 06 131 • Max. elevation recommended: 10 m (Flow rate: 6 l/h)• Maximum intake: 1 meter• Power: 230 V, 50/60 Hz 0.1 Amp.• Maximum flow rate: 12 l/h at 0 m height• Sound level: 21 dB (A)• Pump dimensions: 114 x 99 x 44 mm• Weight: 0.31 kgMINI LIME+SILENT with 80 x 79 mm cream colored duct 163.00

AS 06 159 • The same as the previous one but with 65 x 70 mm white gutterMINI LIME+SILENT 160.00

«MAXI LIME» PUMP

AS 06 132 • Max. elevation recommended: 15 m (Flow rate: 10 l/h)• Maximum intake: 1 meter• Power: 18 W at 230 V, 50/60 Hz• Max. flow 35 l/h at 0 m height• Sound level: 35 dB (A)• Pump dimensions: 119 x 99 x 44 mm• Weight: 0.47 kgMAXI LIME with 70 x 65 mm cream colored duct 170.00

General features:- Power: 230 V 50/60 Hz.- Consumption: 0.2 Amp.- Suction 3 m.- Discharge 12 m.- Flow rate: 6.5 l/h at 12 m.

- Temperature: 40 °C. - Test switch.- It can operate dry.- Very silence 47 dB (A).- Inlet/outlet pipe Ø6 mm.

General features:- Reversible, it can be mounted on the

right or the left side of the device.- Built-in level in the container:

9 mm Stop; 20 mm Start;25 mm Security.

- Flat corner in the assembled pump- 800 mm duct.

- Ø6 polyvinyl pipe 2 meters long with anti-return valve.

- Ø15/20 500 mm connected pipe to the device.- Ø10x9 insulating and 750 mm length.- 70 x 65 mm wall fixing trim.- Screws and dowels wall fixing.- 2 white polyamide clamps.

MECHANICAL

UNIVERSAL

Check valve

Anti-thermosyphonvalve

MINI LIME



39

CONDENSATE PUMPS“Multi Application”


«MINI AQUA» PUMPAS 06 100 • Max. height recommended: 10 m (Flow rate: 10 l/h)

• Maximum intake: 2 m• Power: 16 W at 230 V 50/60 Hz• Sound level: 21 dB (A)• Dimensions: 28 x 28 x 165 mm• Ø6 mm discharge tube included• Level tank1 piece5 + pieces

12 l/h

109.00101.00/pc.

AS 06 150 MINI AQUA + SILENT 19 dB (A) 127.00«MICRO-V» INTELLIGENT PUMP WITH GRADUAL STARTING

AS 06 164 • Maximum elevation: 10 m (Flow rate: 6 l/h)• Maximum intake: 2 m• Power: 16 W at 230 V 50/60 Hz• Sound level: 19 dB (A)• Electronic probe without float• Pump dimensions: 31 x 106 x 37 mm• Power supply dimensions: 36 x 133 x 34 mm• Probe dimensions: 35 x 60 x 35 mm• Total weight (3 modules): 0.46 kg

14.5 l/h

149.00«MINI ORANGE» PUMP

AS 06 115 • Maximum elevation: 10 m (Flow rate: 6 l/h)• Maximum intake: 2 m• Power: 16 W• Sound level: 21 dB (A)• Power: 230 V, 50/60 Hz• Pump dimensions: 52 x 122 x 38 mm• Weight: 0.23 kg• 2 tanks of 42 x 75 x 40 mm level (1 to mount in

the evaporator tray and another to be mounted directly on the outlet pipe)

1 piece5+ pieces

12 l/h

111.00103.00/pc.

AS 06 151 MINI ORANGE + SILENT 19 dB (A) 127.00«MAXI ORANGE» PUMP

AS 06 118 • Max. elevation: 15 m• Max. intake: 2 m• Power: 18 W• Power: 230 V, 50/60 Hz• Sound level: 35 dB (A)• Pump dimensions: 66 x 122 x 44 mm• Weight: 0.45 kg• 2 tanks of 42 x 75 x 40 mm level (1 to mount in

the evaporator tray and another to be mounted directly on the outlet pipe)

35 l/h

124.00


flow €

CENTRIFUGAL PUMP WITH «SE 300/4» TANKSpecial for conditioning and condensing gas boilers

AS 06 840 • Three level float: Start / Stop / Alarm• Maximum elevation: 5 meters• Power: 70 W (0.67 A)• Condensates temperature: 65 °C, 80 °C

in short periods• 4 A alarm contact• Sound: 45 dB, class A at 1 m• 2 l tank• 1/4" non-return flap valve• Dimensions: 279 x 130 x 171 mm• Ø10 mm PVC pipe1 piece5+ pieces

300 l/h

CONDENSATIONBOILERS

>2.5 pH

75.0070.00/pc.

ONLY 28 x 28 mmIT IS INSTALLED INSIDE THE DUCT

ONLY

19dB(A)

SOUND LEVEL




flow €

«MD-300 W» PUMP

AS 06 851 • Maximum elevation: 2.4 m• Integrated check valve• 0.8 liter tank• Outlet diameter: 3/8"• Voltage: 230 V 50/60 Hz• Dimensions: 185 x 86 x 128.5 mm• Power: 42 W

1 piece+ than 10 pieces

150 l/h

73.0067.00/pc.

ACCESSORY

AS 06 852 Protection case for outdoor conditions with copperpipe on the left or right side 9.00

«MD 400» PUMP

AS 06 855 • Maximum elevation: 4 m• Integrated check valve• Tank capacity: 2 liters• Voltage: 220 V 50/60 Hz• Dimensions: 185 x 135 x 256 mm• Power: 85 W

1 piece+ than 10 pieces

237 l/h

73.0067.00/pc.

«MD 600» PUMP

AS 06 856 • Maximum elevation: 5.5 m• Integrated check valve• Tank capacity: 2 liters• Voltage: 220 V 50/60 Hz• Dimensions: 185 x 135 x 256 mm• Power: 117 W

264 l/h

75.00

OPTIONAL ACCESSORY

AS 06 862 Optional audiovisual alarm 24.50


«EC-1» PUMP

AS 06 904 • Maximum elevation: 10 m• Max. height: 1 m• Power: 230 V 50/60 Hz• Sound level: 21 dB (A)• Dimensions: 104 x 43 x 61 mm

The following items are included:• Support for level tank• Pump support• Several connection pipes

10 l/h

90.00

MD 300 W

Mods. MD

Acoustic and lightalarm

MD 300 Wwith casingfront view

MD 300 Wwith casingback view



41


flow €

«VCMA-20S» PUMPAS 06 901 • Maximum elevation: 4.3 m

• Flow rate at 4 m: 70 l/h• 3/8" integrated check valve• 1.9 liter tank• Power: 60W at 230V 50Hz• Dimensions: 178 x 288 x 127 mm• Weight: 2.4 kg1 piece+ than 5 pieces+ than 10 pieces

294 l/h

90.0085.00/pc.82.00/pc.

«VCC-20S» PUMPAS 06 900 • Maximum elevation: 4.3 m

• Flow rate at 4 m: 70 l/h• 3/8" integrated check valve• 1.1 liter tank• Dimensions: 127 x 300 x 125 mm• Weight: 2.2 kgPower: 60 W at 230 V 50 Hz1 piece+ than 5 pieces+ than 10 pieces

294 l/h

90.0085.00/pc.82.00/pc.

«VCL-24S» PUMPAS 06 902 • Maximum elevation: 5.9 m

• Flow rate at 4 m: 450 l/h• 3/8" integrated check valve• 3.8 liters tank• Power: 150 W at 230 V 50 Hz• Dimensions: 263 x 300 x 150 mm• Weight: 3.9 kg

900 l/h

180.00

SUCTION PUMP FOR CONDENSATESCode Item Max.

flow €

• Extremely silent• 230 V supply• Thermal protection• Ø6 mm external inlet/outlet pipe• Operation by rotary elastomeric diaphragm which

allows the pump to function even with suspended solids and dirty fluids.

“MINIBLUE” PUMP• Impulsion height: 8 m• Intake height: 5 m• Consumption: 70 mA• Dimens.: wide 56 x height 64 x length 90 mm

8 l/h

AS 06 924 MINI-BLUE 120.00“MAXIBLUE” PUMP

AS 06 928 • Impulsion height: 8 m• Intake height: 8 m• With level sensor• Dimens.: wide 56 x height 64 x length 160 mm

14 l/h

180.00“MEGABLUE” PUMP

• Impulsion height: 20 m• Intake height: 7 m• Dimens.: wide 51 x height 64 x length 276 mm• Ø 6 mm external inlet/outlet pipe

50 l/h

AS 06 925 Megablue Level• Detects water and starts, the auxiliary contact

disconnects the conditioner 250.00AS 06 926 Megablue Probe

• Two temperature probes model placed in the air inlet and outlet 250.00

VCMA-20S

VCL-24S

VCC-20S

ONLY

127mm

Miniblue

Maxiblue

Rotary diaphragmpump

Megablue

LevelSensor

SUSPEDED

SOLIDS



ELECTRICAL ACCESSORIES

Sockets and plugs

Code Item €

SOCKETS AND PLUGS

AS 07 101AS 07 100

AS 07 102AS 07 103

Socket 16 A to 250 V with earth wireSocket 16 A to 250 V with earth wireand transparent cover“Schuko” plug 16 A to 250 V with earth wire“Schuko” plug 16 A to 250 V with earth wire at 90°

3.40

4.992.602.20

SOCKET/PLUG ADAPTERS

AS 07 105AS 07 106

2 ways adapter in T 16 A3 ways cross adapter 16 A

2.984.39

MULTI-SOCKET WITH SWITCH

AS 07 181AS 07 182AS 07 183

• 1.5 m wire of 1.5 mm²• Power: 220/240 V• 3500 W3-outlet multi-socket4-outlet multi-socket5-outlet multi-socket

9.4810.4011.56

INSULATING TAPE

AS 07 119AS 07 120AS 07 121AS 07 122

20 m x 19 mm roll WHITE (48 pcs./box)20 m x 19 mm roll BLACK (48 pcs./box)10 m x 19 mm roll BLACK (80 pcs./box)10 m x 19 mm roll WHITE (80 pcs./box)

1.25/roll1.25/roll0.60/roll0.60/roll

HELICOIDAL POLYETHYLENE CASE

• Polyethylene (PE) delayed flame• White colored• Operation temperature: from -60 °C to +80 °C• Length: 30 meters

Type Ø internal WidthApplication (mm)

mín. máx.

AS 07 241AS 07 242AS 07 243

SB PE 4SB PE 9SB PE 16

49

16

7.812.516.0

51020

20100150

19.2044.2094.30

EXTENSION CABLE

AS 07 115AS 07 116

• Socket/plug with earth wire• Section 3 x 1.5 mmLength. 5 mLength. 10 m

15.5827.60

BUILT-IN MECHANISM BOXES

AS 07 271

AS 07 273

AS 07 275

• Material: ABS with screwsLinkable four-sided box• Dimensions: 64 x 62 x 44Two-element universal box• Dimensions: 140 x 70 x 44Three-element universal box• Dimensions: 210 x 70 x 44

0.34

0.92

1.35

Surface base

3-wayadapter

Surface base withtransparent cover

Schuko sockets

2-wayadapter

4-basemulti-socket

Insulating tape

Helical cover

Built-in boxes

Extender



43

ELECTRICAL ACCESSORIESCode Item €

MAGNETIC STARTERS

Reference I max.(A)

kWN.º

poles230 V 400/415 V

AS 07 651 3RL18-2M06 1..1.6 0.10 0.37 3 40.70AS 07 652 3RL18-2M07 1.6..2.5 0.37 0.75 3 40.70AS 07 653 3RL18-2M08 2.5..4 0.75 1.5 3 40.70AS 07 654 3RL18-2M10 4..6.3 1.1 2.2 3 40.70AS 07 655 3RL18-2M14 6..10 2.2 4 3 41.90AS 07 656 3RL18-2M16 9..14 3 5.5 3 41.90AS 07 657 3RL18-2M20 13..18 4 9 3 41.90

MAGNETIC STARTER IN A PLASTIC BOXReferences

I max.(A)

kWN.º

polesMagnetic starter + Case 230 V 400/415 V

AS 07 661 3RL18-2M06 3RL18-4S 1..1.6 0.10 0.37 3 54.80AS 07 662 3RL18-2M07 3RL18-4S 1.6..2.5 0.37 0.75 3 54.80AS 07 663 3RL18-2M08 3RL18-4S 2.5..4 0.75 1.5 3 54.80AS 07 664 3RL18-2M10 3RL18-4S 4..6.3 1.1 2.2 3 54.80AS 07 665 3RL18-2M14 3RL18-4S 6..10 2.2 4 3 56.00AS 07 666 3RL18-2M16 3RL18-4S 9..14 3 5.5 3 56.00AS 07 667 3RL18-2M20 3RL18-4S 13..18 4 9 3 56.00

«CIRCUIT BREAKER» PROTECTION SWITCHES

SINGLE-PHASE Nom.Intens. A

N.ºpoles

AS 07 203AS 07 205AS 07 206AS 07 207AS 07 208AS 07 209AS 07 210

NLS 10 - 1/NNLS 16 - 1/NNLS 20 - 1/NNLS 25 - 1/NNLS 32 - 1/NNLS 40 - 1/NNLS 63 - 1/N

10162025324063

1+N1+N1+N1+N1+N1+N1+N

5.805.805.805.805.805.805.80

THREE-PHASE + NEUTRAL

Nom.Intens. A

N.ºpoles

AS 07 215AS 07 216AS 07 217AS 07 218AS 07 219AS 07 220

MVT 10 - 3/NMVT 15 - 3/NMVT 20 - 3/NMVT 25 - 3/NMVT 32 - 3/NMVT 40 - 3/N

101520253240

3+N3+N3+N3+N3+N3+N

10.6010.6010.6010.6010.6010.60

30 mA DIFFERENTIAL SWITCHESAS 07 232AS 07 234AS 07 235

MSL 40 - 1/NMSL 40 - 3/NMSL 63 - 3/N

404063

244

12.5021.6444.05

CIRCUIT BREAKER PROTECTION BOXESAS 07 251

AS 07 252

CS2 For one bipolar circuit breaker (2 poles)• Dimensions: 130 x 51 x 60CS4 For two bipolar circuit breakers (4 poles)• Dimensions: 130 x 88 x 60

4.75

5.65PROTECTION BOX WITH TRANSPARENT COVERModel Type Measures N.º poles

AS 07 253AS 07 254AS 07 255AS 07 256

3 RC 643 RC 663 RC 683 RC 612

SurfaceIP40

200 x 110 x 94200 x 145 x 94200 x 180 x 94200 x 255 x 94

468

12

12.2513.6516.7018.67

AS 07 263AS 07 264AS 07 265AS 07 266

3 RC 543 RC 563 RC 583 RC 512

To build inIP40

222 x 136 x 92222 x 170 x 92222 x 205 x 92222 x 280 x 92

468

12

11.8014.6216.7519.80

NSL

MSL

CS2 CS4

3 RC68



ELECTRICAL ACCESSORIESContactors 6-52 A, 220-230/50 Hz, 220-60 Hz

Code Type KW/A Main contactors DANFOSS code €

CF 15 217CF 15 218CF 15 219CF 15 210CF 15 211CF 15 212CF 15 214CF 15 215CF 15 216

CI-9CI-12CI-15CI20CI25CI30CI37CI45CI50

4/95.5/127.5/1610/2011/2515/30

18.5/3722/4525/52

333333333

037H002132037H003132037H004932037H004532037H005132037H005532037H005632037H007132037H008032

30.8035.1042.5055.9067.8079.50

118.70158.70172.20

CF 15 202CF 15 204CF 15 206CF 15 208

CI6CI9CI12CI15

2.2/64/9

5.5/127.5/16

4444

037H001832037H002231037H003232037H005031

33.6037.0041.5052.50

*Please check other powers.

Spare coils

Code Voltage Description for DANFOSS code €

For CI 6, 9, 12, 15, 20, 25, 30, 37, 45 and 50 contactorsCF 15 232CF 15 234CF 15 235

24 V 50-60 Hz220-230 V 50 Hz/220 V 60 Hz380-400 V 50 Hz/440 V 60 Hz

CI6-30CI6-30CI6-30

037H6484037H6488037H6478

18.6018.6018.60

Auxiliary contactCode Model DANFOSS code €

CF 15 221CF 15 222

Closing CB - NOOpening CB - NC

037H0121037H0122

16.8016.80

TI 16C-TI 30C thermal relays

Code Type Magnetic starter range (A)

Y/A starter range (A)

DANFOSS code €

CF 15 240CF 15 241CF 15 242CF 15 243CF 15 244CF 15 245CF 15 246CF 15 247CF 15 248CF 15 249CF 15 251CF 15 252CF 15 253

TI16CTI16CTI16CTI16CTI16CTI16CTI16CTI16CTI16CTI16CTI25CTI25CTI30C

0.4-0.620.6-0.92

0.85-1.301.2-1.91.8-2.82.7-4.24.0-6.26.0-9.28.0-1211-1615-2019-2524-32

––––

3.2-4.84.7-7.3

6.9-10.710-16

13-20.819-2726-3533-4341-55

047H0203047H0204047H0205047H0206047H0207047H0208047H0209047H0210047H0211047H0212047H0213047H0214047H0215

36.6036.6036.6036.6036.6036.6036.6036.6036.6036.6048.1048.1058.30

Industrial relaysCode Item €

• High switching power• Reduced size• CE standard conformed• 1.5 Kv insulating coil/contactors

10 A SWITCHING CAPACITY2 CONTACTORS SETTING

CO 09 410 RMIA2-10 220 AC 11.905 A SWITCHING CAPACITY4 CONTACTORS SETTING

CO 09 413 RMIA4-5 220 AC 13.00CO 09 415 RMIA4NA Base for 2 and 4 contactors relays

(DIN rail or frame mounting) 7.70

Contactor

CB contactor

TI16C



45

ELECTRICAL ACCESSORIESFOR SPLIT ASSEMBLY

Code Item Pcs. box €

TRANSPARENT CONNECTION STRIPS

AS 07 131AS 07 132AS 07 133

6 mm section 12 poles10 mm section 12 poles16 mm section 12 poles

1.411.892.99

IP54 CONNECTION BOXES

AS 07 141AS 07 142AS 07 143

Ø80 x 45 mm dimensions (clip)80 x 80 x 50 dimensions (screw)100 x 100 x 55 dimensions (screw)

8101

1.26/pc.1.86/pc.2.85/pc.

DUCT FOR ELECTRIC CONNECTION

AS 07 301AS 07 302AS 07 303

Miniduct 10-20Miniduct 16-16Miniduct 16-25

8012080

1.70/m2.15/m3.00/m

CLAMP TO BIND AN ELECTRIC WIRE

• Self-extinguishable• Use: from -40 to 110 °C

AS 04 311AS 04 312AS 04 313CA 07 955CA 07 958CA 07 959CA 07 961CA 07 962

• BLACK colored polyamideLength 100 x 2.5 mm 200 x 4.5 mm length 280 x 4.5 mm length540 x 7.8 mm length780 x 7.8 mm length780 x 9 mm length1000 x 12.5 mm length1220 x 9 mm length

1001001001001001005050

0.73/bag3.96/bag5.68/bag0.53/pc.0.57/pc.0.88/pc.1.49/pc.1.66/pc.

AS 04 315AS 04 316AS 04 317

• WHITE colored polyamide100 x 2.5 mm length 200 x 4.5 mm length 280 x 4.5 mm length

100100100

0.73/bag3.96/bag5.68/bag

CA 07 969 ATC8 Pliers for clamping and cutting (up to 8 mm) 1 40.00

CA 07 970 ATC Pliers for clamping (up to 13 mm wide) 1 105.00

AS 04 300 Adhesive plate for clamp. Perfect for fixing on glass, aluminium, stainless steel, etc.

1000.22/pc.

STAPLE WITH STEEL NAIL

AS 07 284AS 07 285AS 07 286AS 07 287

Ø8 mm blackØ9 mm blackØ10 mm blackØ12 mm black

100100100100

5.60/box6.65/box7.95/box8.85/box

AS 07 293AS 07 294AS 07 295AS 07 296AS 07 297

Ø7 mm whiteØ8 mm whiteØ9 mm whiteØ10 mm whiteØ12 mm white

100100100100100

5.30/box5.52/box6.60/box8.20/box8.90/box

CABLE GLANDS WITH NUT

Model Ø Drill Pcs. box

AS 07 322AS 07 323AS 07 324AS 07 325

QPG 11QPG 13QPG 16QPG 21

6101214

8121418

16212329

50505050

0.60/pc.0.85/pc.1.00/pc.1.30/pc.

Outlet for cones

10-20 16-16 16-25

Bags of 100 pcs.

ATC clamping pliers

ATC 8clamping pliers

Adhesive plate

Cable glandswith nut

White staple

Black staple




Code Item Roll (m) €/roll

GREEN ELECTRICAL WIRE“Halogen free”

AS 07 061AS 07 062AS 07 063AS 07 064AS 07 065AS 07 071AS 07 072AS 07 073AS 07 074AS 07 075AS 07 082AS 07 084

• Hose: RZ1K• Max. power: 1000 V• Reticulated polyethylene insulation and covered

by flame retardant polyolefinSection 3 x 1.5Section 4 x 1.5Section 5 x 1.5Section 6 x 1.5Section 8 x 1.5Section 3 x 2.5Section 4 x 2.5Section 5 x 2.5Section 6 x 2.5Section 8 x 2.5Section 3 x 4Section 5 x 4

Checkwebsite

for updated prices

AS 07 045AS 07 046AS 07 047AS 07 048AS 07 050

Section 3 x 1.5Section 4 x 1.5Section 5 x 1.5Section 3 x 2.5Section 5 x 2.5

Checkwebsite

for updated prices

WHITE ELECTRIC WIRE

AS 07 015AS 07 016AS 07 002AS 07 012AS 07 006AS 07 014

• VVK acrylic hose• Maximum voltage: 750 VSection 2 x 1.5Section 2 x 2.5Section 3 x 1.5Section 3 x 2.5Section 4 x 1.5Section 5 x 1.5

Checkwebsite

for updated prices

AS 07 093AS 07 094AS 07 095AS 07 096AS 07 097AS 07 098

Section 2 x 1.5Section 2 x 2.5Section 3 x 1.5Section 3 x 2.5Section 4 x 1.5Section 5 x 1.5

Checkwebsite

for updated prices

AS 07 041AS 07 042AS 07 043AS 07 044AS 07 040

Section 3 x 1.5Section 4 x 1.5Section 5 x 1.5Section 3 x 2.5Section 5 x 2.5

Checkwebsite

for updated prices

BLACK ELECTRIC WIRE

AS 07 001AS 07 003AS 07 004AS 07 005AS 07 007AS 07 008AS 07 009AS 07 010AS 07 011AS 07 017AS 07 018AS 07 019AS 07 020AS 07 031

• RVK acrylic hose• Maximum voltage: 1000 VSection 3 x 1.5Section 3 x 2.5Section 3 x 4Section 4 x 1.5Section 4 x 2.5Section 4 x 4Section 5 x 1.5Section 5 x 2.5Section 5 x 4Section 6 x 1.5Section 6 x 2.5Section 8 x 1.5Section 8 x 2.5Section 10 x 1.5

Checkwebsite

for updated prices

Green electrical wire“Halogen free”:

For installation in placesof public concurrencyAccording to ITC-BT

Do not emittoxic fumes

in case of fire

Do not spreadthe flames

Do not emitcorrosive

fumes

100 mRolls

100 mRolls

100 mRolls

50 mRolls

10 mRolls

10 mRolls



47


Code Item Roll (m) €/rollCOMMUNICATION WIRE

AS 07 051AS 07 052AS 07 053AS 07 054

• Maximum voltage: 500 VSection 2 x 1 WHITESection 3 x 1 WHITESection 4 x 1 WHITESection 5 x 1 WHITE/BLACK

100 m100 m100 m100 m

Checkwebsite

for updated prices

“SHIELDED” COMMUNICATION WIRE

AS 07 055AS 07 057

• Maximum voltage: 500 V• Halogen free• Section 3 x 1 mm100 m roll10 m roll

100 m10 m

Checkwebsite

for updated prices

SINGLE-POLE ELECTRICAL WIRE “Halogen free”• Hose: ES07Z1-K• Max. power: 450/750 V• HFFR thermoplastic polyolefin insulation

TIZ1 type according to UNE 211002, annex 1• Operation temperature: 70 °C

AS 07 457AS 07 458AS 07 459AS 07 460AS 07 461

Section 1.5 mm BLACKSection 1.5 mm BLUESection 1.5 mm BROWNSection 1.5 mm GREYSection 1.5 mm EARTH

200 m200 m200 m200 m200 m

63.4063.4063.4063.4063.40

AS 07 463AS 07 464AS 07 465AS 07 466AS 07 467

Section 2.5 mm BLACKSection 2.5 mm BLUESection 2.5 mm BROWNSection 2.5 mm GREYSection 2.5 mm EARTH

100 m100 m100 m100 m100 m

52.1052.1052.1052.1052.10

CORRUGATED PIPE PROTECTION

AS 07 151AS 07 152AS 07 154

• Material: BLACK colored PVC• It does not spread flames• To built in wall and ceilingDiameter 12.6 / 16 (100 m roll)Diameter 16.4 / 20 (100 m roll)Diameter 20.6 / 25 (75 m roll)

0.31/m0.34/m0.46/m

AS 07 161AS 07 162AS 07 164

• Material: GREY colored polypropylene• Does not spread flames• To pass cables on floors, walls, etc.Diameter 10.7 / 16 (100 m rolls)Diameter 14.1 / 20 (100 m rolls)Diameter 18.3 / 25 (75 m rolls)

0.63/m0.73/m1.10/m

Lubricant for cables

Code Item €“FENIX” LUBRICANT

MA 11 256 1 kg lubricant bottle with spray 12.50

ROTARY SWITCH FOR OUTDOOR USECode Item €

EASY FIT ISOLATOR

AS 07 171AS 07 172AS 07 173AS 07 174

• 4-pole switch, IP66 protection, Power: 230V. 50-60Hz, easy to fix

20 A 4-pole model32 A 4-pole model40 A 4-pole model63 A 4-pole model

32.6034.0039.8042.00

PVC pipe

Polypropylene pipe

Communication wire



SPLITS PROTECTION SYSTEMS

Outdoor units covers

Code Item Long Height Depth €

“SUPER” SERIES

• Supplied in bag for shop exhibitor

AS 11 021AS 11 022AS 11 023AS 11 024

Small typeMedium typeLarge typeExtralarge type

760800860950

550600700850

270300350400

30.0032.0034.0036.00

• Outdoor units protective cages

Code Item €

AS 11 101AS 11 102AS 11 103

• Allow the condensate units protection from leaves, birds, balls...

• Cream colored paintedSmall CSPMedium CSMBig CSG

335.50422.00522.00

Condenser valve covers

Code Item €

AS 11 211 Set of 2 insulating flexible covers for 1/4" and 3/8"-1/2" split charge valves 4.30

AIR DEFLECTOR FOR CASSETTE TYPE AIR CONDITIONERCode Item €

AS 11 030 •Air deflector for cassette type air conditioner• White color• Plastic material• Weight: 0.88 kg• Dimensions: 530×150 mm•Easy to fix on the edge of the trim panel 35.00

LINESET BENDER FOR INSULATED PIPES “Easybend”

Code Item €

HF 03 021 •For the following dimensions 1/4", 3/8", 1/2", 5/8"• Length 4 meters• Four colors 65.00

ModelEXTERNAL SIZES INTERNAL SIZES

A B C A B C

CSP 700 1000 450 600 900 350

CSM 1100 1100 600 1000 1000 500

CSG 1400 1100 600 1300 1000 500

Easybend

TWISTEDOUTDOOR



49

INSULATED AND LINED COPPER PIPECode Dimensions

Wall thickness€/Roll

Copper Insulation“ESCOFRED” 25 METERS ROLLS

TF 01 431TF 01 433TF 01 434TF 01 438TF 01 435TF 01 436TF 01 437

1/4"3/8"1/2"5/8"5/8"3/4"7/8"

0.80.80.80.811

1.10

99

1010101010

Checkwebsite

for updated prices

CLD SPLIT 25 METERS ROLLSTF 01 441TF 01 443TF 01 444TF 01 448TF 01 446TF 01 447

1/4"3/8"1/2"5/8"3/4"7/8"

0.80.80.80.811

99

10101010

Checkwebsite

for updated prices

50 METERS ROLLSTF 01 461/471TF 01 463/473TF 01 464/474TF 01 467/477

TF 01 465TF 01 466/476

1/4"3/8"1/2"5/8"5/8"3/4"

0.80.80.80.811

99

10101010

Checkwebsite

for updated prices

Note: Prices could be modified according to international market quotations without previous notice, PLEASE CHECK.

DOUBLE INSULATED AND LINED COPPER PIPECode Dimensions

Wall thickness€/Roll

Copper Insulation“ESCOFRED” 20 METERS ROLLS

TF 01 411TF 01 412TF 01 419TF 01 413TF 01 417TF 01 418TF 01 414TF 01 415TF 01 416

1/4"-3/8" pipe1/4"-1/2" pipe1/4"-5/8" pipe1/4"-5/8" pipe3/8"-1/2" pipe3/8"-5/8" pipe3/8"-5/8" pipe3/8"-3/4" pipe1/2"-3/4" pipe

0.80.80.80.80.80.80.80.80.8

0.80.80.81

0.80.8111

6.56.56.56.57777

10

71010101010101010

Checkwebsite

for updated prices

CLD SPLIT 20 METERS ROLLSTF 01 421TF 01 422TF 01 423TF 01 424TF 01 425

1/4"-3/8" pipe1/4"-1/2" pipe1/4"-5/8" pipe3/8"-5/8" pipe3/8"-1/2" pipe

0.80.80.80.80.8

0.80.80.80.80.8

6.56.56.577

710101010

Checkwebsite

for updated prices

Double insulated copper pipe with flared joint and nut

Code DimensionsWall thickness

€/RollCopper Insulation

3 METERS ROLLSTF 01 501/506TF 01 502/507

TF 01 503TF 01 504/508

TF 01 505

1/4"-3/8" pipes1/4"-1/2" pipes1/4"-5/8" pipes3/8"-5/8" pipes3/8"-3/4" pipes

0.80.80.80.80.8

0.80.8111

6.56.56.577

710101010

44.4363.1575.7285.07

103.505-METER ROLLS

TF 01 511/525TF 01 512/526

TF 01 513TF 01 514/527

1/4"-3/8" pipes1/4"-1/2" pipes1/4"-5/8" pipes3/8"-5/8" pipes

0.80.80.80.8

0.80.811

6.56.56.57

7101010

64.4685.07

103.50115.19

Double insulated aluminium pipe with copper fittings and flared joint and nut

Code Dimensions €3 METERS ROLL

TF 01 516TF 01 517

1/4" - 3/8" pipe1/4" - 1/2" pipe

25.2628.79

5-METER ROLLTF 01 518TF 01 519

1/4" - 3/8" pipe1/4" - 1/2" pipe

32.0040.20

Features:- Insulation: Self-extinguishing

closed airframe.- Coating: Compact polyethylene

coating with external protection.- Working temp.: from -45 °C

to +100 °C.

Features:- Insulation: Self-extinguishing

closed airframe.- Coating: Compact polyethylene

coating with external protection.- Working temp.: from -45 °C

to +100 °C.

Flaring tool detail and nut



INSULATED COPPER PIPE EN12735-1 standardCode Item €/Roll

INSULATED SIMPLE PIPE - EN 12735-1 standard

TF 01 491TF 01 492TF 01 493TF 01 494TF 01 495

• “SPLIT” 25 meters roll1/4" pipe3/8" pipe1/2" pipe5/8" pipe3/4" pipe

Please check

TF 01 521TF 01 522TF 01 523TF 01 524

• “SPLIT” 50 meters roll1/4" pipe3/8" pipe1/2" pipe5/8" pipe

Please check

INSULATED DOBLE PIPE - EN 12735-1 standard

TF 01 481TF 01 482TF 01 483TF 01 484TF 01 485

• “SPLIT” 20 meters roll1/4" — 3/8" pipe1/4" — 1/2" pipe1/4" — 5/8" pipe3/8" — 1/2" pipe3/8" — 5/8" pipe

Please check

TF 01 480• “SPLIT” 10 meters roll1/4" pipe — 3/8" pipe

COOLING COPPER PIPECode Dimensions Wall thick. (mm) Box content Ø Ext. pipe (mm) €/Roll

12735-1-2001 standard• 15 meters roll

TF 01 091TF 01 092TF 01 143TF 01 094TF 01 095TF 01 096TF 01 099TF 01 100TF 01 097TF 01 098TF 01 082TF 01 084TF 01 085TF 01 086

3/16"1/4"5/16"3/8"1/2"5/8"5/8"3/4"3/4"7/8"1/4"3/8"1/2"5/8"

0.7620.80.80.80.80.81

0.811

0.70.70.70.7

141110865544411865

4.766.357.939.5212.7015.8715.8719.0519.0522.226.359.52

12.7013.87

Checkwebsite

for updated prices

Cooling copper pipe coilsCode Item Wall (mm) Meters €

50 METERS COILS - 12735-1-2001 standardTF 01 181TF 01 183TF 01 184TF 01 185TF 01 186

1/4" coil3/8" coil1/2" coil5/8" coil3/4" coil

0.800.800.800.801.00

5050505050

Checkwebsite

for updated prices

Cooling copper pipe barsCode Dimensions Wall thick. (mm) Ø Ext. pipe €/linear m

RIGID COPPER PIPE - EN 12735-1-2001 standard• 5 meters bars

TF 01 118TF 01 119TF 01 151TF 01 120TF 01 121TF 01 129TF 01 122TF 01 123TF 01 153TF 01 124TF 01 125TF 01 126TF 01 127TF 01 128TF 01 028TF 01 029TF 01 133TF 01 134

3/8"1/2"1/2"5/8"5/8"3/4"3/4"7/8"7/8"1"

1-1/8"1-1/8"1-3/8"1-5/8"2-1/8"2-5/8"3-1/8"3-1/8"

0.80.8

1 (CO2)0.81

0.811

1.14 (CO2)11

1.251.251.251.251.651.652.5

9.5212.7012.7015.8715.8719.0519.0522.2222.2225.4028.5728.5734.9241.2753.9766.6879.3779.37

Checkwebsite

for updated prices

* Options in bold: usual size according to Standard.

Note: Prices could bemodified according to the

international market quotations without previous notice,

PLEASE CHECK.



51

COPPER FITTINGS FOR SPLITSCode Dimensions Pieces

box €

FEMALE / FEMALE COUPLING SLEEVETF 02 001TF 02 002TF 02 003TF 02 004TF 02 005TF 02 006TF 02 012TF 02 007

1/4"3/8"1/2"5/8"3/4"7/8"1"

1-1/8"

10010010010050502525

0.370.690.580.541.261.302.822.19

90° FEMALE / FEMALE ELBOWTF 02 021TF 02 022TF 02 023TF 02 024TF 02 025TF 02 026TF 02 032TF 02 027

1/4"3/8"1/2"5/8"3/4"7/8"1"

1-1/8"

1001001005025251010

2.762.652.982.842.984.018.255.44

90° FEMALE / FEMALE ELBOWTF 02 041TF 02 042TF 02 043TF 02 044TF 02 045TF 02 046TF 02 047

1/4"3/8"1/2"5/8"3/4"7/8"

1-1/8"

10010010050502520

1.401.441.350.913.301.994.32

TEETF 02 081TF 02 082TF 02 083TF 02 084TF 02 085TF 02 086TF 02 087

1/4"3/8"1/2"5/8"3/4"7/8"

1-1/8"

1001005050252510

3.623.742.821.516.152.987.86

45° FEMALE / FEMALE ELBOWTF 02 061TF 02 062TF 02 063TF 02 064TF 02 065TF 02 066TF 02 075TF 02 067

1/4"3/8"1/2"5/8"3/4"7/8"1"

1-1/8"

1001001005050252520

3.703.452.621.004.942.27

10.304.52

FEMALE / FEMALE SIPHONTF 02 141TF 02 142TF 02 143TF 02 144

5/83/47/8

1 1/8

1111

16.3818.1019.6627.40

90° MALE / FEMALE ELBOWTF 02 163TF 02 164TF 02 165TF 02 166TF 02 167TF 02 169

3/8"1/2"5/8"3/4"7/8"

1 1/8"

10010050502520

2.302.221.123.163.625.98

90° MALE / FEMALE ELBOWTF 02 182TF 02 183TF 02 184TF 02 185TF 02 186TF 02 187TF 02 188TF 02 189

1/4"3/8"1/2"5/8"3/4"7/8"1"

1-1/8"

1001001005025252510

4.184.097.245.246.086.60

20.0010.20

Code Dimensions Piecesbox €

FEMALE / FEMALE REDUCERTF 02 101TF 02 103TF 02 102TF 02 106TF 02 105TF 02 104TF 02 109TF 02 108TF 02 107TF 02 137TF 02 112TF 02 111TF 02 110TF 02 136TF 02 115TF 02 114TF 02 113

3/8x1/4"1/2x1/4"1/2x3/8"5/8x1/4"5/8x3/8"5/8x1/2"3/4x3/8"3/4x1/2"3/4x5/8"7/8x3/8"7/8x1/2"7/8x5/8"7/8x3/4"

1-1/8"x1/2"1-1/8x5/8"1-1/8x3/4"1-1/8x7/8"

1001001001001001005050505050505025252525

2.981.421.301.161.161.103.103.062.602.202.002.002.063.503.733.733.73

MALE / FEMALE REDUCERTF 02 251TF 02 253TF 02 252TF 02 254TF 02 255TF 02 256TF 02 257TF 02 258TF 02 259TF 02 260

3/8-1/4"1/2-1/4"1/2-3/8"5/8-1/2"5/8-3/8"3/4-1/2"3/4-3/8"7/8-3/4"7/8-5/8"7/8-1/2"

1001001001001005050505050

1.301.561.561.401.403.103.102.052.182.20

FEMALE CAP FOR TUBETF 02 401TF 02 402TF 02 403TF 02 404TF 02 405TF 02 406TF 02 407

1/4"3/8"1/2"5/8"3/4"7/8"

1-1/8"

10010010010010010025

0.740.691.050.861.101.302.42

180° FEMALE / FEMALE ELBOWTF 02 201TF 02 202TF 02 203TF 02 204TF 02 205TF 02 206TF 02 207

1/4"3/8"1/2"5/8"3/4"7/8"

1-1/8"

11

5025101010

2.762.162.845.629.72

12.6825.12

COUPLING HOSE WITH 1/4" SAE SCHRADER VALVE AND CAP

TF 06 051TF 06 052TF 06 053TF 06 054TF 06 055TF 06 056TF 06 057TF 06 058

1/4" x 1/4"5/16" x 5/16"

3/8" x 3/8"1/2" x 1/2"5/8" x 5/8"3/4" x 3/4"7/8" x 7/8"

1-1/8" x 1-1/8"

3.504.004.255.005.755.808.00

11.60

* For other figures and dimensions up to 3-5/8", see COOLING catalogue.

WC-403

W 400 R



INSULATED COPPER PIPE PROTECTIONCode Item €

IA 20 907IA 20 903IA 20 905

WHITE paint for insulation with UV protection• 0.5 kg can• 1 kg can (model to remove)• 2.5 kg can

27.5535.6060.00

IA 05 995 Ivory-white insulating self-adhesive tape10 m x 50 mm x 3 mm rolls12 rolls per box

19.3016.60/pc.

AI 09 000 PLASTIESC white self-adhesive tapeRolls 25 m x 50 mm48 rolls per box

3.503.10/pc.

COUPLING CONNECTIONS FOR SPLITS- Without welding.- Direct connection to SAE coupling. Whole set- Easy assembly and disassembly.- It prevents gas leakage due to

defective welding in inaccessible places.

Code Item Boxes €COUPLINGS

TF 03 501TF 03 502TF 03 503TF 03 504TF 03 505

SAE 1/4" x 0.8 setSAE 3/8" x 0.8 setSAE 1/2" x 0.8 setSAE 5/8" x 1 setSAE 3/4" x 1 set

1010101010

5.308.008.208.40

16.70CALIBRATION TOOLS

TF 03 511TF 03 512TF 03 513TF 03 514TF 03 515

1/4" x 0.8 tool3/8" x 0.8 tool1/2" x 0.8 tool5/8" x 1 tool3/4" x 1 tool

50.0052.0054.4060.0062.80

PIPE IDENTIFICATION PLATESPT label holder:

1 2 3

Code Item €LABEL HOLDER WITH CLAMP

AI 28 101

• This special system allows installation on vertical or horizontal pipes

• It includes clamps made of elastic-plastic materialPT model (20 pcs. boxes) 12.50/pc.

ELASTIC CLAMP

AI 28 105

• It allows to enlarge the pipe diameter of the PT label holders

FAS model 8.72STICKERS

AI 28 108

• Supplied in Din A-4 leavesBoxes of 10 white stickers

ETB model 2.46

Whole set

1 2 3

PT

FAS

ETB

Placingthe label

Vertical or horizontaltube mounting



53

INSULATED MULTI-PURPOSE BRANCH JOINTFOR MULTI-SPLIT SYSTEMS

- To use with new refrigerants.- Can be cut according to your needs- It includes self-extinguishable and auto-adhesive insulation.- 30 and 45 models contain:

1 branch joint for suction, 1 for liquid and 1 adapter.- 90 model components are:

1 branch joint for suction, 1 for liquid and 3 adapters (of 7/8" to 1/4",1/2" to 1" and 1/4" to 1/2")

Code ItemDimensionsØ aspiration

Dimensions Ø liquid €

A B C A B C

TF 03 601 Nº 30 branch joints set + Adapter (from 1" to 7/8")

1/2"to

7/8"

3/8"to

7/8"

3/8"to

3/4"1/4" to 1/2"

96.00

TF 03 602 Nº 45 branch joints set + Adapter (from 1" to 1-1/8")

5/8"to1"

1/2"to1"

1/2"to

7/8"1/4" to 1/2"

100.00

TF 03 603 Nº 90 Y junctions+ Adapter

1-1/8" to

1-1/2"

1"to

1-1/2"

1/2"to1"

5/8" to

7/8"

1/2" to

7/8"

1/2" to

3/4"

211.00

INSULATED MULTI-PURPOSE COLLECTORSFOR MULTI-SPLITS SYSTEMS

- To use with new refrigerants.- Can be cut according to your needs- It includes self-extinguishable and auto-adhesive insulation.

Code Item €

TF 03 604TF 03 605TF 03 606

5/8" suction collector - 1/2" 4 liquid outlets both sides5/8" suction collector - 1/2" 6 liquid outlets both sides3/4" suction collector - 3/8" 8 liquid outlets both sides

150.00163.00173.00

DIRECTION CHANGECode Item €

TF 03 525TF 03 526TF 03 527TF 03 528

• Male / Female joint1/4"-1/4" thread3/8"-3/8" thread1/2"-1/2" thread5/8"-5/8" thread

5.508.00

11.0015.00

ve insulation

Gas

Gas return

Liquid

External unit

Main pipe Secondary pipe

By pass



BRANCH JOINT SET - DISTRIBUTOR FOR MULTI-SPLIT SYSTEM AND MVD

DIMENSIONS

Code Item €

BRANCH JOINT KIT

TF 03 611TF 03 612TF 03 613TF 03 614TF 03 615TF 03 616

FQZHN-01DFQZHN-02DFQZHN-03DFQZHN-04DFQZHN-05DFQZHN-06D

62.0068.00

134.00201.00225.00258.00

- Includes GASand LIQUID distributor.

- Possibility of cutting to the desired measure.

- Horizontal installation. GASline

GASline

GASline

GASline

GASline

GASline

LIQUIDline

LIQUIDline

LIQUIDline

LIQUIDline

LIQUIDline

LIQUIDline

MEASURES-EQUIVALENCES

1/4" 6.4

3/8" 9.5

1/2" 12

5/8" 15.9

3/4" 19.1

7/8" 22.2

1" 25.4

1-1/8" 28.6

1-1/4" 31.8

1-3/8" 34.9

1-1/2" 38.1

1-5/8" 41.3

1-3/4" 44.5

2-1/8" 54

2-1/2" 63.5



55

“SAE” BRASS FITTINGSCode Dimensions €

“SAE” NUTS

TF 03 071TF 03 076TF 03 072TF 03 073TF 03 074TF 03 075

1/4" SAE5/16" SAE3/8" SAE1/2" SAE5/8" SAE3/4" SAE

0.742.901.271.642.473.70

“SAE” REDUCED NUTS

TF 03 081TF 03 082TF 03 083TF 03 084

3/8" x 1/4"1/2" x 3/8" 5/8" x 1/2" 3/4" x 5/8"

1.542.152.454.90

COPPER JOINTS

TF 03 191TF 03 192TF 03 193TF 03 194TF 03 195

For 1/4" pipeFor 3/8" pipeFor 1/2" pipeFor 5/8" pipeFor 3/4" pipe

0.260.300.370.430.80

“SAE” MALE/FEMALE COUPLING FOR WELDING

TF 03 171TF 03 172TF 03 173TF 03 174TF 03 175

1/4"3/8"1/2"5/8"3/4"

1.532.653.354.309.35

“SAE” MALE TEE

TF 03 131TF 03 136TF 03 132TF 03 133TF 03 134TF 03 135

1/4"5/16"3/8"1/2"5/8"3/4"

5.509.409.40

13.0522.6026.85

"SAE” MOBILE THREAD-NUTFOR PIPE WELDING

TF 03 201TF 03 202TF 03 203TF 03 204TF 03 205

1/4" SAE for 1/4" copper3/8" SAE for 3/8" copper1/2" SAE for 1/2" copper5/8" SAE for 5/8" copper3/4" SAE for 3/4" copper

4.655.906.107.259.95

“GAS” FEMALE REDUCER /“SAE” MALE

TF 03 001TF 03 002TF 03 003TF 03 008TF 03 004TF 03 000TF 03 005TF 03 009TF 03 029TF 03 010TF 03 006TF 03 007

1/8" gas x 1/4" SAE1/4" gas x 1/4" SAE1/4" gas x 3/8" SAE1/4" gas x 5/8" SAE3/8" gas x 1/4" SAE3/8" gas x 3/8" SAE3/8" gas x 1/2" SAE1/2" gas x 1/4" SAE1/2" gas x 3/8" SAE1/2" gas x 1/2" SAE1/2" gas x 5/8" SAE3/4" gas x 5/8" SAE

1.502.502.905.902.824.723.323.725.454.984.959.85

“SAE” x “GAS”MALE / MALE REDUCER

TF 03 011TF 03 012TF 03 013TF 03 014TF 03 019TF 03 015TF 03 016TF 03 017TF 03 020TF 03 018

1/4" SAE x 1/8" gas1/4" SAE x 1/4" gas3/8" SAE x 1/4" gas3/8" SAE x 3/8" gas 3/8" SAE x 1/2" gas1/2" SAE x 3/8" gas1/2" SAE x 1/2" gas5/8" SAE x 1/2" gas3/4" SAE x 1/2" gas3/4" SAE x 3/4" gas

1.401.732.402.583.383.434.154.207.758.30

Code Dimensions €“SAE” MALE x MALE NIPPLES

TF 03 091TF 03 096TF 03 092TF 03 093TF 03 094TF 03 095

1/4"5/16"3/8"1/2"5/8"3/4"

1.182.002.253.485.206.95

“SAE”x“SAE” ELBOW COUPLINGTF 03 151TF 03 156TF 03 152TF 03 153TF 03 154TF 03 155

1/4" x 1/4" 5/16" x 5/16"

3/8" x 3/8" 1/2" x 1/2" 5/8" x 5/8" 3/4" x 3/4"

3.607.954.306.557.98

23.00NUTS CUP SEAL

TF 03 181TF 03 182TF 03 183TF 03 184TF 03 185

For 1/4" pipeFor 3/8" pipeFor 1/2" pipeFor 5/8" pipeFor 3/4" pipe

0.210.270.340.410.64

SWIVEL DOUBLE FEMALEADAPTOR

TF 03 281TF 03 282TF 03 283TF 03 284

1/4" x 1/4" SAE3/8" x 3/8" SAE1/2" x 1/2" SAE5/8" x 5/8" SAE

3.304.905.00

12.95MALE / FEMALE REDUCER

TF 03 120TF 03 121TF 03 122TF 03 119TF 03 123TF 03 124TF 03 118TF 03 117TF 03 125TF 03 116TF 03 126TF 03 130TF 03 127TF 03 128TF 03 129

1/4" x 1/4" SAE1/4" x 3/8" SAE1/4" x 1/2" SAE1/4" x 5/8" SAE3/8" x 1/4" SAE3/8" x 3/8" SAE3/8" x 1/2" SAE3/8" x 5/8" SAE1/2" x 3/8" SAE1/2" x 1/2" SAE1/2" x 5/8" SAE5/8" x 3/8" SAE5/8" x 1/2" SAE5/8" x 3/4" SAE3/4" x 5/8" SAE

2.552.904.734.502.473.363.725.105.254.455.025.705.438.559.50

MALE / MALE REDUCERTF 03 111TF 03 109TF 03 112TF 03 113TF 03 114TF 03 110TF 03 115

3/8" x 1/4" SAE1/2" x 1/4" SAE1/2" x 3/8" SAE5/8" x 3/8" SAE5/8" x 1/2" SAE3/4" x 1/2" SAE3/4" x 5/8" SAE

2.473.183.224.504.507.008.60

“SAE” FEMALE COUPLINGTF 03 101TF 03 106TF 03 102TF 03 103TF 03 104TF 03 105

1/4" SAE5/16" SAE3/8" SAE1/2" SAE5/8" SAE3/4" SAE

2.704.454.325.308.05

10.00“SAE” FEMALE CAPS

TF 03 041TF 03 042TF 03 043TF 03 044TF 03 045

1/4" SAE3/8" SAE1/2" SAE5/8" SAE3/4" SAE

0.721.942.653.685.55

“SAE” MALE CAPSTF 03 051TF 03 052TF 03 053TF 03 054TF 03 055


0.921.782.453.205.70



APRIL 2013 RITE (SPANISH REGULATIONS)THICK INSULATION FOR AIR CONDITIONING

Temperature up to 100 °C: FLEXIBLE TUBULAR INSULATION /

COPPER pipe IRON pipe Diameter Temperature Inside the building Outside the building

1/4" — 6 Thickness 9 13

Code IA 04 021 / AI 04 121 *3/8" 1/8" 10 Thickness 9 13

Code IA 04 022 / AI 04 122 IA 04 052 / AI 04 152

1/2" — 12 Thickness 9 13

Code IA 04 023 / AI 04 123 IA 04 053 / AI 04 153

5/8" 1/4" 15 Thickness 13 19

Code IA 04 054 / AI 04 154 IA 04 073 / AI 04 173

3/4" 3/8" 18 Thickness 13 19

Code IA 04 055 / AI 04 155 IA 04 074 / AI 04 174

7/8" 1/2" 22 Thickness 13 19

Code IA 04 056 / AI 04 156 IA 04 075 / AI 04 175

1" — 25 Thickness 13 19

Code IA 04 057 / AI 04 157 IA 04 076 / AI 04 176

1 1/8" 3/4" 28 Thickness 19 25

Code IA 04 077 / AI 04 177 AI 04 320 / AI 04 238

*For bigger measures, please consult the “INSULATION” price list

FLEXIBLE TUBULAR INSULATIONST.M1 Class

Code ItemInner diameter Cont.

boxlinear meter

€mm Copper Iron

9 mm THICKNESSAI 04 121AI 04 122AI 04 123

6 x 9 10 x 9 12 x 9

61012

1/4"3/8"1/2"

–––

352266234

0.900.981.14

13 mm THICKNESSAI 04 152AI 04 154AI 04 155AI 04 156AI 04 157

10 x 1315 x 1318 x 1322 x 1325 x 13

1015182225

3/8"5/8"3/4"7/8"1"

––

3/8"1/2"

–

1721361189880

1.461.741.932.152.51

19 mm THICKNESSAI 04 173AI 04 174AI 04 175AI 04 176AI 04 177

15 x 19 18 x 19 22 x 19 25 x 19 28 x 19

1518222528

5/8"3/4"7/8"1"

1-1/8"

-3/8"1/2"

–3/4"

7872645048

4.134.444.825.245.73

25 mm THICKNESSAI 04 203 28 x 25 28 1-1/8" 3/4" 40 6.50

*For bigger measures, please consult the “INSULATION” price list

- Elastomer extruded from Nitril - PVC closed cell.- Thermal conductivity :

Thickness 6-25 mm: Thickness > 25mm:0.033 W(m.k) to 0 °C 0.036 W(m.k) to 0 °C0.034 W(m.k) to 10 °C 0.037 W(m.k) to 10 °C0.037 W(m.k) to 40 °C 0.040 W(m.k) to 40 °C

- Pipes working temperature: -40 to +110 °C.

- Standard length: 2 m.- Permeability coef. (UNI 9233): ≥ 10.000 up to ≤ 25 mm thickness.

≥ 7.000 from >25 mm thickness.- Fire resistance: BL S3 d0- Ozone resistance*: Excellent- Atmospheric agents resistance*: Excellent

*Please consult our technical department.

10,000Thickness: up to 25 mm

TOCOMPLY

RITE



57

TUBULAR INSULATION SPLIT DIMENSIONSM1 Class

CodeItem Lineal

meter€

Complete box€Ref. Ø Nom. Ø Copper Ø Iron Box content

6 mm THICKNESS (D)IA 04 001IA 04 002IA 04 003IA 04 004IA 04 005IA 04 006IA 04 007IA 04 008

6 x 610 x 612 x 615 x 618 x 622 x 625 x 628 x 6

610121518222528

1/4"3/8"1/2"5/8"3/4"7/8"1"

1-1/8"

————

3/8"1/2"—

3/4"

496364316266220180152130

0.420.470.560.650.750.841.081.17

0.400.440.530.620.710.801.021.11

9 mm THICKNESS (F)IA 04 021IA 04 022IA 04 023IA 04 024IA 04 025IA 04 026IA 04 027IA 04 028

6 x 910 x 912 x 915 x 918 x 922 x 925 x 928 x 9

610121518222528

1/4"3/8"1/2"5/8"3/4"7/8"1"

1-1/8"

————

3/8"1/2"—

3/4"

35226623419216613610898

0.610.650.750.800.840.941.081.26

0.580.620.710.760.800.891.021.20

13 mm THICKNESS (F)IA 04 052IA 04 053IA 04 054IA 04 055IA 04 056IA 04 057IA 04 058

10 x 1312 x 1315 x 1318 x 1322 x 1325 x 1328 x 13

10121518222528

3/8"1/2"5/8"3/4"7/8"1"

1-1/8"

———

3/8"1/2"—

3/4"

172162136118988078

1.561.601.781.952.092.302.65

1.471.511.671.841.962.162.49

19 mm THICKNESS (F)IA 04 071IA 04 072IA 04 073IA 04 074IA 04 075IA 04 076IA 04 077

10 x 1912 x 1915 x 1918 x 1922 x 1925 x 1928 x 19

10121518222528

3/8"1/2"5/8"3/4"7/8"1"

1-1/8"

———

3/8"1/2"—

3/4"

98887872645048

2.082.623.163.503.914.194.46

1.962.462.983.303.683.944.21

25 mm THICKNESS (M)AI 04 143AI 04 144AI 04 240AI 04 311AI 04 317AI 04 318AI 04 319AI 04 320

6 x 2510 x 2512 x 2515 x 2518 x 2522 x 2525 x 2528 x 25

610121518222528

1/4"3/8"1/2"5/8"3/4"7/8"1"

1-1/8"

—1/8"——

3/8"1/2"—

3/4"

6460545250424040

4.454.534.584.704.985.556.086.61

4.244.304.354.464.745.285.786.28

For other size and thickness, please consult our “INSULATION” catalogue.

ACCESSORIESCode Item Box content €/Roll

INSULATING SELF-ADHESIVE TAPE

IA 05 991

IA 05 992

IA 05 993

IA 05 994

IA 05 995

• Rolls of 10 m x 50 mm x 3 mmISOCELL tapeFull box: 24 rolls• Rolls of 10 m x 100 mm x 3 mmISOCELL tapeFull box: 12 rolls• Rolls of 15 m x 50 mm x 3 mmBLACK tape• Rolls of 30 m x 50 mm x 3 mmBLACK tape• Rolls of 10 m x 50 mm x 3 mmWHITE tape, ivory colorComplete box: 24 rolls

24

12

12

12

24

14.8412.47

29.6624.91

22.34

44.66

19.3016.60

SUPERFLEXIBLE 10,000



ACCESSORIESCode Item €

GLUE

AI 20 000AI 20 001

0.5 kg glue can1 kg glue can

5.509.80

SET OF BRUSHES

AI 20 005 Set of 3 plastic handle brushes 20-30-40 3.79

SET OF SCRAPERS

AI 20 006 Set of 4 metal spatulas 2.93

SOLVENT

AI 20 051 1 liter solvent can to clean tools and stains18.90

INSULATING PAINT FOR OUTER PROTECTION

IA 20 906IA 20 907IA 20 904IA 20 905

0.5 kg GREY can0.5 kg WHITE can2.5 kg GREY can2.5 kg WHITE can

27.5527.5560.0060.00

BOXES OF TUBULAR INSULATION ROLLS

Code ItemInner diameter Cont.

box€

Boxmm Copper Iron

6 mm THICKNESS

IA 04 901IA 04 902IA 04 903IA 04 904IA 04 905IA 04 906IA 04 907

6 x 610 x 612 x 615 x 618 x 622 x 628 x 6

6101215182228

1/4"3/8"1/2"5/8"3/4"7/8"

1-1/8"

----

3/8"1/2"3/4"

50464038302320

41.3441.3441.3441.3441.3441.3441.34

9 mm THICKNESS

IA 04 911IA 04 912IA 04 913IA 04 914IA 04 915IA 04 916IA 04 917

6 x 910 x 912 x 915 x 918 x 922 x 928 x 9

6101215182228

1/4"3/8"1/2"5/8"3/4"7/8"

1-1/8"

----

3/8"1/2"3/4"

40343127231914

41.3441.3441.3441.3441.3441.3441.34

13 mm THICKNESS

IA 04 921IA 04 922IA 04 923IA 04 924IA 04 925IA 04 926IA 04 927

6 x 1310 x 1312 x 1315 x 1318 x 1322 x 1328 x 13

6101215182228

1/4"3/8"1/2"5/8"3/4"7/8"

1-1/8"

----

3/8"1/2"3/4"

26231817151410

41.3441.3441.3441.3441.3441.3441.34

- Working temperature:-40 °C to +105 °C.

- Thermal conductivity : 0 °C = 0.035 W/(m.K)

- Impermeability factor:M > 10,000.

- Fire resistance: M1- Box dimensions: 50 x 50 x 20 cm

Easytransportin all kindof vehicles



59

INSULATION ROLLS AND SHEETSCode Item Box content €/m²

M1 SHEET

AI 04 361AI 04 362AI 04 363AI 04 364AI 04 365

PL 06 (2000 x 1000)PL 10 (2000 x 1000)PL 13 (2000 x 1000)PL 19 (2000 x 1000)PL 25 (2000 x 1000)

4832241612

16.7721.6527.2638.3843.12

M1 ROLL

AI 04 371AI 04 372AI 04 373AI 04 374AI 04 375

R 06 (30 x 1 m)R 10 (20 x 1 m)R 13 (14 x 1 m)R 19 (10 x 1 m)R 25 (8 x 1 m)

302014108

16.7721.6527.2638.3843.12

M1 SELF-ADHESIVE ROLL

AI 04 381AI 04 382AI 04 383AI 04 384

RA 06 (30 x 1 m)RA 10 (20 x 1 m)RA 13 (14 x 1 m)RA 19 (10 x 1 m)

30201410

20.3725.9031.9346.09

ADHESIVE TAPESCode Item Box of rolls €/pc.

PVC TAPE

AI 09 000AI 09 001AI 09 002

PLASTIESC 50 white (25 m x 50 mm roll)PLASTIESC 50 black (25 m x 50 mm roll)PLASTIESC 50 grey (25 m x 50 mm roll)Order of 48 rolls (1 box)

484848

3.503.503.503.10

“NEWCOBON” ALUMINIUM TAPE30 MICRONS

AI 09 031 NEWCOBON 50/30 (50 m x 50 mm roll)Order of 24 rolls (1 box)

24 5.555.15


20 6.956.45


16 8.457.80


12 11.2510.30

“NEWCOBON” ALUMINIUM TAPE50 MICRONS


24 8.157.20


20 10.058.75


16 12.2010.80

PVC tapePLASTIESC

TapeAluminium

TapeNEWCOBON

IMPORTANTE EYE!50 meters

DO NOT CONFUSE with competition(50 Yards = 45 meters)

NEWCOBON: Transparent adhesive



INSULATED CLAMPS FOR PIPESGalvanized clamp with insulated bracket

Code Copper Iron Insulation Diameter €It safely protects against condensate formation and reduces the pipe bracket thermal losses, according to DIN 4140 (part 2. art. 3. 4.)Particularly suitable for secure attachment and thermal insulation of pipe installations for Heating, Air conditioning and Cooling.

AI 07 421AI 07 422AI 07 423AI 07 424AI 07 425AI 07 426AI 07 427AI 07 428AI 07 429

3/4"7/8"

1 1/8"1 3/8"1 5/8"

-2 1/8"2 3/8"2 5/8"

3/8"1/2"3/4"1"

1 1/4"1 1/2"

-2"-

191919191919191919

182228354248546064

6.806.907.207.408.008.809.40

10.1010.80

AI 07 441AI 07 442AI 07 443AI 07 444AI 07 445AI 07 446AI 07 447AI 07 448AI 07 449

3/4"7/8"

1-1/8"1-3/8"1-5/8"

2-1/8"2-3/8"2-5/8"

3/8"1/2"3/4"1"

1 -1/4"1 -1/2"

-2"-

252525252525252525

182228354248546064

8.208.609.009.90

11.1011.9013.0014.0017.80

AI 07 451AI 07 452AI 07 453AI 07 454AI 07 455AI 07 456AI 07 457AI 07 458AI 07 459AI 07 460AI 07 461

3/4"7/8"

1-1/8"1-3/8"1-5/8"

-2-1/8"2-3/8"2-5/8"

3"3-1/8"

3/8"1/2"3/4"1"

1-1/4"1-1/2"

-2"-

2-1/2"3"

3232323232323232323232

1822283542485460647689

9.009.30

11.2011.3012.4013.5014.4015.3019.0021.4025.40

ISOPHONIC CLAMPSCode Dimensions Pcs. Box €/pc.

M6 CLAMPAF 01 311AF 01 312AF 01 313AF 01 314AF 01 315AF 01 316AF 01 317

Ø12Ø14-15Ø16Ø18Ø20Ø22Ø26

100100100100100100100

0.160.190.190.200.380.210.39

M8 CLAMPAF 01 341AF 01 342AF 01 343AF 01 344AF 01 345AF 01 346AF 01 347AF 01 348AF 01 349AF 01 350

Ø18 (15-19)Ø22 (20-25)Ø28 (26-30)Ø35 (32-36)Ø40 (38-43)Ø48 (47-51)Ø54 (53-56)Ø60 (60-64)Ø70 (68-72)Ø75 (75-80)

50505050505025252525

0.470.500.540.580.640.680.790.821.480.95

“COMPLETE BOX” SUPPLYAF 01 301AF 01 302AF 01 304AF 01 306AF 01 323

Ø12 x M6Ø14-15 x M6Ø18 x M6Ø22 x M6Ø26 x M8

10010010010050

15.00/box18.00/box19.00/box20.00/box26.00/box

- Working temperature:from -40 to 105 °C

- Thermal conductivity: ≤ 0.036 Wmk to 0 °C

- Resistance factor tothe water vapor diffusion:

≥ 7000- Fire resistance:

Class 1 according to UNI 8457and UNI 9174

Clamp + bracket



61

FIXING SYSTEMS FOR INSULATED PIPES

Wall fixing

Code Model Pcs. box €• Bichromate finishing• Drill fixing on the base

“GRIP LOCKS”AF 01 151 Type 1 (54 x 30 mm)

pipe size 1/4" liquid up to 1/2" gas 10 1.84AF 01 152 Type 2 (60 x 32 mm)



pipe size 5/8" liquid up to 1/8" gas 10 2.27

HANGER FOR INSULATED PIPESThreaded rod type

Code Model For pipes Pcs. box €

• Bichromate finishing• Guide for M8, M10 rod

AF 01 161 BBJ-2 5/8" and 3/8" 10 3.03AF 01 162 BBJ-3 7/8" and 1/2" 10 3.14AF 01 163 BBJ-4 1-3/8" and 5/8" 10 3.30

ANTI-CONDENSATION TAPE FOR COOLINGCode Item €

IA 10 206

• Preformed ribbon made from bituminous resin and cork• Work temperature: -30 to +80 °C• Protected with silicone paper8.5 m x 50 mm x 3 mm roll 17.00

SILICONE SEALING

Code Item€ / piece

Spare pcs. 24 pcs.box

DUCTS AND JOINTS SEALING

AI 19 001AI 19 002AI 19 003AI 19 011

280 ml silicone pipe, WHITE color280 ml silicone pipe, TRANSLUCENT color280 ml anti-mould silicone pipe, GREY-ALUMINIUM colorH175 spray gun for gear rack application

4.154.155.304.80

3.453.454.60

—

Threaded rod

BBJ fixation

Wire cable

Isolated pipe

DIMENSIONS(mm)

A B C

75 55 35

87 62 35

100 70 35

Type 4



PVC CLAMPS POR INSULATED PIPESCode Dimensions Pcs. Box €/pc.

RAPID-FIX ROD• Easy installation on M8 or M10 threaded rod

AF 15 196AF 15 197AF 15 198AF 15 199AF 15 201AF 15 202AF 15 203AF 15 204AF 15 205

Ø 20 mmØ 22 mmØ 25 mmØ 28 mmØ 35 mmØ 40 mmØ 42 mmØ 50 mmØ 54 mm

101010101010101010

1.451.501.551.621.872.102.322.562.79

RAPID-FIX WALL• Requires only hammer to install• Drill hole with bit Ø10 mm

AF 15 156AF 15 157AF 15 158AF 15 159AF 15 161AF 15 162AF 15 163AF 15 164

Ø 20 mmØ 22 mmØ 25 mmØ 28 mmØ 32 mmØ 35 mmØ 40 mmØ 42 mm

1010101010101010

1.781.921.972.142.582.762.913.10

Ø RAPIDFIX SELECTION TABLE

Clamp diam. 20 22 25 28 32 35 40 42 50

Insulated Øpipe Øpipe Øpipe Øpipe Øpipe Øpipe Øpipe Øpipe Øpipe

6 6 - 9 15 20/22 - 28 35 -

9 - 6 - 10 13/15 20 22 28 -

13 - - 6 - 6 10/12 15 20/22 -

19 - - - - - - - 6/10 12

VALVES FOR SPLITSCode Item €

TF 06 101TF 06 102TF 06 103TF 06 104TF 06 105

• 1/4" VALVE CORE plugRR.603 1/4"RR.603 3/8"RR.603 1/2"RR.603 5/8"RR.603 3/4"

10.0010.0014.0018.0031.00

TF 06 111• WITHOUT VALVE CORE plugRR.605 1/4" 10.00

STRAIGHT PASS VALVES WHEELCode Model €

TO THREADVF 01 301VF 01 302VF 01 303VF 01 304VF 01 305

CT-D-04CT-D-06CT-D-08CT-D-10CT-D-12


13.0015.0017.0023.0043.00

TO WELDVF 01 351VF 01 352VF 01 353VF 01 354VF 01 355VF 01 356

CT-D-04SCT-D-06SCT-D-08SCT-D-10SCT-D-12SCT-D-14S

1/4" ODS3/8" ODS1/2" ODS5/8" ODS3/4" ODS7/8" ODS

13.0015.0017.0023.0041.0047.00

RAPID-FIX rod

RAPID-FIX wall



63

LOADING VALVES AND ACCESSORIESValve cores

Code Item €SOLDERING SERVICE VALVE (NO CAP NO CORE)

TF 06 000TF 06 004TF 06 033

1/4" SAE reduced soldering without cap nor valve core1/4" SAE flat soldering without cap nor valve core5/16" soldering without cap nor valve core

1.020.801.90

THREADING VALVE CORETF 06 002TF 06 032

1/4" SAE soldering with normal cap1/4" SAE soldering with cap with key

1.652.50

SOLDERING VALVE CORETF 06 001TF 06 031

1/4" soldering with normal cap1/4" soldering with cap with key

1.431.25

SOLDERING SERVICE VALVE WITH TUBETF 06 009TF 06 010TF 06 012

1/4" soldering with 45 mm pipe. Cap1/4" soldering with 100 mm pipe. Cap5/16" soldering with 45 mm pipe. 1/4" cap

1.351.752.08

SPARE VALVE CORETF 06 005 Valve core spare

Bags of 100 units0.42

0.38/pc.CAPS

TF 06 181TF 06 182TF 06 183TF 06 184

1/4" knurl cap without key-tool1/4" knurl cap with key-tool to dismount valve core5/16" knurl cap without key-tool5/16" knurl cap with key-tool to dismount valve core

0.750.951.652.00

TOOLS TO EXTRACT VALVE CORESTF 06 021TF 06 025TF 06 023TF 06 026TF 06 027

Mini valve key-toolCTV1 metallic key-toolA 3200 valve core tool screwerR410 (5/16") valve core separator without pressure drop1/4" valve core separator without pressure dropwith 5/16" adapter for R410A

8.307.10

24.7065.00

32.50JOINING SLEEVE WITH VALVE CORE AND CAP

TF 06 051TF 06 052TF 06 053TF 06 054TF 06 055TF 06 056TF 06 057TF 06 058

1/4" x 1/4" ODS5/16" x 5/16" ODS3/8" x 3/8" ODS1/2" x 1/2" ODS5/8" x 5/8" ODS3/4" x 3/4" ODS7/8" x 7/8" ODS1-1/8" x 1-1/8" ODS

3.504.004.255.005.755.808.00

11.60MALE COUPLING TEE FOR VALVE CORE

TF 06 007TF 06 003

1/4" NPT x 1/4" load x 1/4" SAE (fig. A)1/8" NPT x 1/4" load x 1/4" SAE (fig. A)

4.753.00

TF 06 008 1/4" SAE x 1/4" load x 1/4" SAE (fig. B) 3.55TF 06 017 1/4" SAE swivel x 1/4" load x 1/4" load (fig. C) 9.00

VALVE CORE - JOINTS SET. Ref. CH237TF 06 028 Mounting kit composed of: 1 valve to dismount and

replacement valve cores, 10 1/4" valve cores, 10 3/8" (R134a) valve cores, 10 5/16" SAE rubber joints, 30 1/4" SAE rubber joints, 10 1/4" hose depressors 38.00

Charge and intervention valves

Code Item €• It allows charging and measuring the pressure at any

part of the system«BPV» VALVES WITH FLANGE

TF 06 121TF 06 122TF 06 123TF 06 124TF 06 125

BPV - 21 for 1/2" and 5/8"BPV - 31 for 1/4", 5/16" and 3/8"BPV - 36 for 3/16"BPV - 34 for 3/4"BPV - 78 for 7/8"

10.508.50

16.9056.0056.00

«IC-A» VALVES WITH FLANGETF 06 221TF 06 222

IC-A-1 for 1/2" and 5/8"IC-A-2 for 1/4", 5/16" and 3/8"

7.506.50

1/4 SAEvalve core

CTV1Caps

A 3200

TF06 026 TF06 027

TF06 024

Fig. BFig. A

Fig. C

BPV

IC-A

TF 06 021



RUBBER ANTIVIBRATION DAMPERSCode Item Thread Load

kg. €/pc.

THREADED BARS ON BOTH SIDES

AV 01 000AV 01 034AV 01 005

A 20A 30E w/ washers & nuts Ø30 height 25 mmA 28/20 with 20-30 mm threaded bar

M6M8M8

125025

1.301.441.49

AV 01 001 A 35b soft grey M8 30 0.95

AV 01 002 A 35 black• 100 pcs. M8 50 0.60

0.52/pc.

AV 01 003 A 45• 50 pcs.• 100 pc.

M8 851.00

0.90/pc.0.82/pc.

AV 01 004 A 6045 M10 250 4.89

FLAT WITHOUT THREADED BARS CONIC SYSTEM

AV 01 008AV 01 010AV 01 011AV 01 012AV 01 013AV 01 014

A 25A 30A 60A 70A 90A 130

M8M8

M12M12M12M16

4580

150350850

1 500

2.062.325.61

11.2811.3831.05

SURFACE WITH THREADED BARS AND NUTS

AV 01 020 S 40• 50 pc.• 100 pc.

M8 20 to 451.00

0.80/pc.0.70/pc.

AV 01 021 S 60• 50 pc.• 100 pc.

M10 80 to 1502.50

1.60/pc.1.20/pc.

AV 01 022 S 70• 24 pc.• 48 pc.

M12 120 to 3505.41

4.84/pc.4.27/pc.

AV 01 023AV 01 024AV 01 025

S 90S 120S 160

M12M16M16

450 to 850950 to 15001000 to 1750

8.9616.5839.96

COMPLETE OUTSIDE WITH HARDWARE

AV 01 018AV 01 028

ANTI (Stainless AISI 304)ANTI-1 (Galvanized steel)

M8M8

3535

8.913.98

FIXATION PLATE SURFACE WITH THREADED BAR

AV 01 031AV 01 032

A 35 / BA 45 / B

M8M8

12 to 5020 to 85

2.212.88

PLATE TO BE FIXED IN THE GROUND

AV 01 332AV 01 333

• Washers and screw are included• 110 x 50 mm rubber base BT-60 height 60BT-75 height 75

M8M8

50 to 15050 to 150

2.382.75

LOW PROFILE SURFACE AND GREAT DIAMETER OF SUPPORT "FRAME"

• With fixing claws

AV 01 321AV 01 322AV 01 323AV 01 324AV 01 325

B085/45B105/45B105/60B155/60B205/45

M8M10M10M14M18

15 to 4525 to 75

50 to 16090 to 300

150 to 500

7.279.469.46

19.8837.75

A 28/20

A 35

A 35b (grey)

Plate without threaded rods

S 40

ANTI-1

BT-60

A 45/B

B085/45



65

ANTI-VIBRATION MATSCode Item Kg load €

RUBBER/CORK/RUBBER PLATE (22 mm)AV 01 231AV 01 232AV 01 233AV 01 234AV 01 237

50 x 50 x 2275 x 75 x 22100 x 100 x 22150 x 150 x 22457 x 457 x 22

75175315700

6000

1.302.253.527.52

70.04RUBBER PLATES TO CUT

AV 01 201AV 01 203AV 01 204AV 01 205AV 01 206AV 01 207

300 x 300 x 8400 x 400 x 1250 x 50 x 1275 x 75 x 12100 x 100 x 12150 x 150 x 12

10002000

3170

125280

8.7414.350.811.191.514.27

RUBBER DOWELSCode Item Kg load €

RUBBER DOWELSAV 01 213AV 01 214AV 01 215AV 01 216AV 01 218

50 x 50 x 15 mm50 x 50 x 20 mm80 x 80 x 25 mm80 x 80 x 35 mm 100 x 100 x 60 mm

70 to 150100 to 250250 to 500300 to 600

1000 to 2700

1.361.703.084.618.50

DOWELS FOR FANSAV 01 099AV 01 100

Ø 5 mm stepØ 8 mm step

0.320.50

CIRCULAR DOWELSAV 01 221AV 01 222AV 01 223AV 01 224

SE 30 Ø40 x 28 mm heightSE 125 Ø50 x 30 mm heightSE 200 Ø70 x 35 mm heightSE 400 Ø95 x 25 mm height

100200450

1800

2.253.504.606.90

RUBBER BRACKETS FOR CEILINGCode Item Box content Kg load €

SUSPENSION BY «TVA» SLIDEAV 01 016AV 01 017AV 01 015

TVA 40 Ø8 M6TVA 60 Ø8 M6TVA 75 Ø8 M6

8 to 2518 to 5025 to 75

3.193.363.52

SUSPENSION VERTICALLY ADJUSTABLE

AV 01 019

• It allows to regulate 25 mm.• M10 threadRDAS - 60 20 20 to 60 9.71

ANTIVIBRATOR DOWEL FOR CHANNEL RAIL

AV 01 041AV 01 042

• With internal metallic washerØ27 M8 dowelØ27 M10 dowel

5555

0.700.76

DUCTS-MACHINES SUSPENSION• With rubber vibration absorber and washer

AV 01 045

AV 01 046

AV 01 047

“BRA-L” L type bracket100 pcs. complete box“BRA-Z” Z type bracket100 pcs. complete box

“BRA-” type bracket100 pcs. complete box

100

100

100

0.840.72/pc.

1.000.86/pc.

0.950.84/pc.

PERFORATED TAPE

AI 21 101• 0.8 mm x 1.7 mm wide galvanized steel10 meters roll 6.72

Without centraldrilling

TVA

PlugØ27

RDAS

BRA-L

BRA-

BRA-Z



METALLIC ANTIVIBRATION DAMPERSCode Item Load kg €

GROUND FIXING

AV 02 002AV 02 003AV 02 004AV 02 005AV 02 006AV 02 007AV 02 008

M - 25M - 50M - 75M - 100M - 150M - 250M - 350

10 to 2520 to 5030 to 75

45 to 11060 to 150

120 to 250150 to 350

5.545.866.497.03

17.4821.7823.08

BED FIXING

AV 02 021AV 02 022AV 02 023AV 02 024AV 02 025AV 02 026AV 02 027

M - 25 - MM - 50 - MM - 75 - MM -100 - MM -150 - MM -250 - MM -350 - M

10 to 2520 to 5030 to 75

45 to 11060 to 150

120 to 250150 to 350

7.547.708.619.18

18.9423.3129.55

DOUBLE BED

AV 02 031AV 02 032AV 02 033AV 02 034AV 02 035AV 02 036AV 02 037

AM - 25 - RAM - 50 - RAM - 75 - RAM -100- RAM -150- RAM -250- RAM -350- R

10 to 2520 to 5030 to 75

45 to 11060 to 150

120 to 250150 to 350

9.1510.0310.5812.2020.4827.0532.03

DOUBLE BED MORE THAN ONE SPRING

AV 02 041AV 02 043AV 02 044

2M -3002M -5002M -700

150 to 300250 to 500300 to 700

46.2547.7157.03

AV 02 051AV 02 052AV 02 053

3M -4503M -7503M -1050

200 to 450300 to 750

400 to 1050

67.9773.5479.17

AV 02 055AV 02 056

4M -10004M -1400

450 to 1000600 to 1400

87.9892.14

AV 02 061AV 02 062

6M -15006M -2100

700 to 1500900 to 2100

117.13136.70

CEILING FIXING

AV 02 102AV 02 103AV 02 104AV 02 105AV 02 106AV 02 107AV 02 108

TM - 25TM - 50TM - 75TM -100TM -150TM -250TM -350

10 to 2520 to 5030 to 75

45 to 10060 to 150

120 to 250150 to 350

8.399.12

10.5110.6827.6137.0138.70

BRACKET/MACHINE FIXED WITH ROD

AV 02 110AV 02 111AV 02 112AV 02 113AV 02 114

RM - 10RM - 20RM - 30RM - 40RM - 50

2 to 107 to 209 to 30

12 to 4050

4.404.604.805.005.20

CEILING FIXED WITH ROD

AV 02 121AV 02 122AV 02 123AV 02 124

TV 10TV 20TV 30TV 40

2 to 109 to 30

12 to 4018 to 50

8.008.208.408.60

M-8THREADED ROD

M-8THREADED ROD

RM TV



67

REFRIGERANT GASCode Item €/kg

R-134A gas (replacement for R-12 - with oil change)GF 01 052GF 01 058GF 01 057GF 01 055

6 kg bottle12 kg bottle25 kg bottle60 kg bottle

Check website for

updatedprices

R-404A gas (for Industrial Cooling)GF 01 068GF 01 067GF 01 066GF 01 065

6 kg bottle (4 kg gas)12 kg bottle (9 kg gas)25 kg bottle (20 kg gas)60 kg bottle (45 kg gas)

Check website for

updatedprices

R-407C gas (for Air Conditioner)GF 01 132GF 01 133GF 01 134GF 01 135


Check website for

updatedprices

R-410A gas (for Air Conditioner)GF 01 152GF 01 153GF 01 154GF 01 155


Check website for

updatedprices

R-507 gas (for Industrial Cooling)GF 01 162GF 01 163GF 01 164GF 01 165


Check website for

updatedprices

R-437A gas (replacement of R-12 and R-409A)GF 01 041GF 01 042GF 01 044

6 kg bottle1 2 kg bottle60 kg bottle

Check website for updated

prices

BottlesCode Item €

EMPTY BOTTLES WITH VALVEGF 02 010/007GF 02 009/006GF 02 012/008GF 02 001/005

6 kg bottle12 kg bottle25 kg bottle60/65 kg bottle

65.0075.00

145.00170.00

EMPTY BOTTLES WITH VALVE FOR RECOVERY

GF 02 016GF 02 017

• Double safety valve25 kg bottle 60/65 kg bottle

205.00240.00

BOTTLE COUPLINGGF 02 119GF 02 120HF 06 127GF 02 132

5/8" female reducer to 1/4" male with plate joint5/8" female reducer to 5/16" male with plate joint1/4" female reducer to 5/16" male with plate jointH21.7 left reducer × M 1/4 SAE R1234YF(R32 bottle)

3.504.604.50

9.50

2 kg refillable bottleCode Item €

GF 02 021 2,5 liters bottle Load capacity: 2 kg. Safety valve. Close by control. Load for 1/4" valve core. 56.00

2 KG GAS LOADGF 01 139GF 01 159GF 01 059GF 01 069GF 01 186

R407C gasR410A gasR134a gasR404A gasR427A gas

Check website for

updatedprices

REGULATION ON TRADE AND HANDLING OF FLUORINATED GASES RD 795/10. In accordance with letter a) of subparagraph 2 of Article 9 of the Royal Decree 795/2010, of16 June, which regulates the trade and handling of fluorinated gases and equipment containing them, as well as the certification of professionals using them, the distributors of fluorinated gases will make sure that, in case the gas target use is as a refrigerant, they shall only hand them over or sell them to qualified companies or manufacturers specialized in those fluids. Qualified companies are those companies authorized to work with refrigeration systems accordingto the Regulation on the security of refrigerant installations approved in the Royal Decree 3099/1977, of 8 September, or according to the Regulation on thermal installations in buildings approved in the Royal Decree 1027/2007, of 20 July, according to letter k) of Article 2 of the Royal Decree 795/2010, of 16 June. Every customer must provide their official certificate as authorized company to Salvador Escoda S.A.

Pressure33 and 47 bar

2.5 kg bottles soldare NOT refunded, but exchanged

by refilled ones

GREEN color

IMPORTANT:The 60 kg bottles will not be

charged for a maximum period of 3 months. If they are not returned after this period,

they are invoiced.

GF 02 119GF 02 132

HF 06 127



REFRIGERANT GASCode Item €

R-427A GAS

GF 01 182GF 01 183GF 01 184GF 01 185

• ALL applications (see table on page B-3)• Air conditioning• Cooling6 kg bottle (6 kg gas)12 kg bottle (12 kg gas)25 kg bottle (25 kg gas)60 kg bottle (60 kg gas)

Check website for

updatedprices

R-417A GAS

GF 01 071GF 01 072GF 01 073GF 01 074

• Application: “ALTA TEMPERATURA”• Air conditioning6 kg bottle (5 kg gas)12 kg bottle (10 kg gas)25 kg bottle (22 kg gas)60 kg bottle (55 kg gas)

Check website for

updatedprices

R-422D GAS

GF 01 172GF 01 173GF 01 174GF 01 175

• Application: “MEDIUM-LOW TEMPERATURE”• Air cooled water chiller• Air conditioning6 kg bottle (5 kg gas)12 kg bottle (10 kg gas)25 kg bottle (20 kg gas)60 kg bottle (55 kg gas)

Check website for

updatedprices

R-422A GAS

GF 01 176GF 01 177GF 01 178GF 01 179

• Application: “MEDIUM TEMPERATURE”• Air conditioning• Cooling6 kg bottle (5 kg gas)12 kg bottle (10 kg gas)25 kg bottle (22 kg gas)60 kg bottle (55 kg gas)

Check website for

updatedprices

407 A GAS

GF 01 082GF 01 083GF 01 084GF 01 085

• Application: “LOW-MEDIUM TEMPERATURE”• Cooling6 kg bottle (5 kg gas)12 kg bottle (10 kg gas)25 kg bottle (22 kg gas)60 kg bottle (55 kg gas)

Check website for

updatedprices

“OPTEON XP 40” R-449A GAS

GF 01 075GF 01 076

• Application: “LOW-MEDIUM TEMPERATURE”• Cooling6 kg bottle (5 kg gas)12 kg bottle (10 kg gas)

Check website for

updatedprices

R-32 GAS

GF 01 096GF 01 097

6 kg bottle (4 kg gas)12 kg bottle (10 kg gas)

Check website for updated

prices

TAXES ON FLUORINATED GASES

DIRECTSubstitute

R-22

SubstituteR-22

SubstituteR-22

SubstituteR-22

SubstituteR-22R-404

SubstituteR-404

This law implies the tax application from January 1st 2014, taxing any sales commercial operation of the cited gases, always and when they are not exempt, and its impact on its customers in the following amounts for 2015/2016:

GAS R134A R404A R407A R407C R410A R417A R422A R422D R424A R427A R449A R507A R32

Tax¤/kg 2017 26.00 75.68 39.80 33.05 39.50 44.69 60.86 52.46 46.57 40.25 26.15 77.00 11.00

Moreover, tax exemption is suitable for authorized companies for the manipulation of loaded equipments with any load according to R.D. 795/2010, which ones must be registered in the Tax Agency obtaining the Code of Fluorinated Gas Activity (CAF), not being exempt those authorized companies for the manipulation with loads of less than 3 kg.

Remember that your company shall also apply, in turn, this tax to the final users in the same amounts, expressing gas quantity, gas heading or amount (being subject to the corresponding VAT).



69

REFRIGERANT GAS IN REFILLABLE BOTTLES1 kg refillable bottle

Code Item €

BOTTLE

GF 02 031GF 02 032

1 kg bottle with 1/4" valve1 kg bottle with 5/16" valve for R410A

6.006.00

GAS LOAD

GF 01 201GF 01 202GF 01 203GF 01 204GF 01 206

900 gr R134a gas 850 gr R407C gas790 gr R404A gas 800 gr R410A gas900 gr R437A gas

35.4937.2042.1637.2974.26

REFRIGERANT GAS IN DISPOSABLE BOTTLECode Item €

“HC” HYDROCARBON GASES

GF 01 119GF 01 121

420 g R-600a bottle370 g R-290 bottle

12.6031.76

R32 HYDROCARBON GASES

GF 01 126 800 gr R32 bottle 58.00

GF 02 130GF 02 131

ACCESSORIES1/2"-16 ACME x 5/16" SAE valveBracket + R32 bottle pipe

23.0066.00

SHUT-OFF VALVES FOR BOTTLESCode Item €

1/4M - 1/4 H SAE VALVES

GF 02 105GF 02 100

Straight ball/coupling valveAngle shut-off valve

14.0015.75

1/4M - 5/16 H SAE VALVES

GF 02 106GF 02 111

Straight ball/coupling valveAngle shut-off valve

13.5015.65

OILS FOR REFRIGERANT SYSTEMSCode Item Bottle €

«SUNISO» POLYOL-ESTER OILS

GF 03 204GF 03 201 SL68

Valid for new gases: R427A, R422D, R417A, R404A, R407C,

R507A, R410A, R134Aand all HFC’s

1liter4 liters

20.7579.30

GF 03 203GF 03 200 SL32 1liter

4 liters20.7579.30

GF 03 205GF 03 202 SL100 1liter

4 liters20.7579.30

GF 03 207GF 03 208 SL22 1liter

4 liters20.7579.30

«SUNISO» MINERAL OILS

GF 03 011GF 03 013 3GS

Valid for R-22, R12and all HFC’s

4 liters20 liters

35.00169.90

GF 03 012GF 03 014 4GS 4 liters

20 liters35.00

169.90

The sold 1 kg bottlesare NOT refunded, but replaced

by refilled ones

SL32

3GS



SPARE PARTS ACCESSORIESFOR AIR CONDITIONING

Speed controller depending on the PRESSURE

Code Mod. Current GAS Bar Amp. €SINGLE-PHASE FAN

CF 04 505CF 04 503CF 04 508CF 04 502CF 04 511CF 04 512CF 04 513CF 04 531CF 04 532CF 04 533

P215 LR 9110P215 SH 9100P215 ST 9100P215 DP 9600P215 LR 9611P215 SH 9101P215 ST 9101P215 SH 9102P215 ST 9102P215 DP 9102

R-22/404A/407CR-22/404A/407CR-22/404A/407CR-22/404A/407C

R134aR134aR134aR410AR410AR410A

14 - 2414 - 2414 - 2414 - 24

8-148-148-14

22 - 4222 - 4222 - 42

3468346468

261.78229.28318.58580.28262.02312.15439.69301.00432.38580.28

SINGLE-PHASE FAN• Direct assembly 1/4" SAE thread female

CF 04 541 P215 PR 9200 R-407C, R-404A, R-134a 10 - 25 3 135.46CF 04 542 P215 PR 9202 R-410A 22 - 42 3 135.46

THREE-PHASE FANCF 04 521 P255 MM 9601 R-134a 8 or 14 5 989.30

Note: P215 and P255 models include anti-interferencesfilter according to the 89/336/EEC standard

SPARE PARTSCF 04 523CF 04 524

P35 AC 9100 (Pressure transducer for P15 and P215)P35 AC 9106 (Pressure transducer for P255)

284.52273.52

Speed controller depending on the TEMPERATURE

Code Model °C range €SINGLE-PHASE FAN

• Fan up to 1000 W (7 A)• DIN mounting• Octal base included• Dimensions: 45 x 92 x 80 mm• Power supply: 220V

CO 32 201CO 32 202

CO 32 203CO 32 204CO 35 001

CO 32 205

For condensers (without temp. probe)FASEC 33 2.5AFASEC 337 7.5AFor evaporators (without temp. probe)FASEC 43 2.5 AFASEC 437 7 AØ 6x30 PTC temperature sensor,1.5 m cable500 W octal base

0 to 60 °C0 to 60 °C

0 to 60 °C0 to 60 °C

-20 to 80 °C

99.00117.20

99.00123.80

8.256.00

Miniature pressure switches

Code ModelRange (bar)

€Open Close

• With AUTOMATIC reset• 1/4" female thread

CF 04 153CF 04 155CF 04 156CF 04 162CF 04 157

P100 AA-3D (2)P100 AA-5D (2)P100 AA-6D (2)P100 CA-1D (2)P100 CP-108 D (R-410A) (2)

10.30.72.4

27.538

15.52.84.1

20.628

21.3021.3021.3024.5528.15

• MANUAL resetCF 04 169CF 04 165CF 04 166

P100 DA-1D (1)P100 DA-72D (R-410A) (1)P100 DA-75D (R-410A) (1)

27.53842

Manual resetManual resetManual reset

38.2242.4542.45

(1) 1.22 m length cable.(2) Faston type ends connection.

Octal base



71

FOUR WAYS REVERSE CYCLE VALVERanco*

CodeModel Capacity (kW) Welding connect.

Fig. €without coilCurrent Coil

series R404A R407 R410 Suction Compression

CF 03 901CF 03 902CF 03 903CF 03 904CF 03 911CF 03 916CF 03 912CF 03 913CF 03 914

V24-08060-200V24-10060-300V34-12080-800V64-12080-100V64-14080-100V64-14100-100V64-14120-100V103-1814-020V123-220T-025

LDKLDKLDKLDKLDKLDKLDKLDKLDK

9.19.1

11.420.120.120.120.135.244.7

6.67.3

10.519.919.919.919.935.245.1

7.78.8

12.323.623.623.623.641.252.8

1/2"5/8"3/4"3/4"7/8"7/8"7/8"

1-1/8"1-3/8"

3/8"3/8"1/2"1/2"1/2"5/8"3/4"7/8"

1-1/8"

112222222

50.7046.9062.4096.00

129.73130.05138.00231.00289.00

COILS FOR VALVES

CF 03 997CF 03 996

• Cable length: 1,200 mmLDK 414801000 coil 230 V 50-60 HzLDK 114801000 coil 24 V 50-60 Hz

27.9032.30

* Models available while stock last.

SanhuaCode Model Capacity

Kcal/hWelding connections €Suction Compression

CF 04 200CF 04 201CF 04 203CF 04 204CF 04 205CF 04 210CF 04 188CF 04 189

SHF4-23 VSHF7-34 VSHF9-35 VSHF11-45 D1SHF20-46SHF20-47STF-04U9STF-0712

3.870 6.536 7.740 9.46017.20017.20023.25039.530

3/8"1/2"5/8"5/8"3/4"3/4"7/8"7/8"

5/16"3/8"3/8"1/2"1/2"1/2"1/2"5/8"

25.1528.9229.5030.2064.5067.7087.30

110.00CF 04 184 220V 50/60 Hz SHF coil (SPARE PART) 12.75

Valves are supplied without the coil (must be separately ordered)

DISCHARGE MUFFLERSCode Model Welding step €

VF 04 101VF 04 102VF 04 103VF 04 104VF 04 105VF 04 106VF 04 107

CM-2203CM-2204CM-2205CM-2307CM-2311CM-2413CM-2415

3/8"1/2"5/8"7/8"

1-1/8"1-3/8"1-5/8"

16.0017.0018.0039.9041.3651.4052.00

SOLDERING BALL VALVE - ODSCode Model Connection €

VF 01 630VF 01 631VF 01 632VF 01 633VF 01 634VF 01 635VF 01 636VF 01 637VF 01 638VF 01 639VF 01 640

VBE6VBE10VBE12VBE16VBE18VBE22VBE28VBE35VBE42VBE54VBE76


1-1/8" ODS1-3/8" ODS1-5/8" ODS2-1/8" ODS2-5/8" ODS

18.7018.7018.7023.0025.8530.0039.7065.10

106.50152.10276.90

VF 01 690VF 01 691VF 01 692VF 01 693VF 01 694VF 01 695VF 01 696VF 01 697VF 01 698VF 01 699VF 01 688VF 01 689

VBOE6VBOE10VBOE12VBOE16VBOE18VBOE22VBOE28VBOE35VBOE42VBOE54VBOE64VBOE76


1-1/8" ODS1-3/8" ODS1-5/8" ODS2-1/8" ODS2-5/8" ODS3-1/8" ODS

21.7521.7521.7525.7030.0034.6045.2073.30

109.55155.60279.00528.00

Important: use thermal grease for welding.

WITHOUT OBUSCONNECTION

WITH OBUSCONNECTION 1/4"

CONCORDANCE TABLECurrent Former

V24-08060-200 V23-08060-200V24-10060-300 V23-10060-300V34-12080-800 V33-12080-800V64-12080-100 V63-12080-100V64-14080-100 V63-14080-100V64-14100-100 V63-14100-100V64-14120-100 V63-14120-100

CONCORDANCE TABLE

SANHUAJOHNSON RANCO SAGINOMIYA Capacity

kW

SHF4 V1-306 CHV-0101 4.5SHF7 V2-310 CHV-0201 7SHF9 V2-310 Does not exist 9

SHF11 V3-310 CHV-0301 11SHF20-46 V4-312 CHV-0401 20SHF20-47 V6 CHV-0601 20

Fig. 2Fig. 1

Maximum pressure: 45 bar



MOLECULAR DRYER FILTERSOEM series

Code Model Connection Volumecm

Capacity (kW)€

R404A R410A R134A

THREADED CONNECTIONS (SAE)VF 03 011VF 03 012VF 03 013

FD 032FD 052FD 082

1/4"1/4"1/4"

5065

100

7.27.27.2

10.810.810.8

101010

8.609.20

12.10VF 03 015VF 03 016VF 03 017

FD 053FD 083FD 163

3/8"3/8"3/8"

65100250

17.817.817.8

26.526.526.5

24.624.624.6

9.2011.2014.20

VF 03 018 FD-164 1/2" 250 26.9 40.2 37.3 15.10VF 03 019 FD-305 5/8" 480 39 58 54 23.00

WELDED CONNECTIONSVF 03 021VF 03 022VF 03 023

FD 032SFD 052SFD 082S

1/4"1/4"1/4"

5065

100

7.27.27.2

10.810.810.8

101010

8.609.20

12.10VF 03 025VF 03 026VF 03 027

FD 053SFD 083SFD 163S

3/8"3/8"3/8"

65100250

17.817.817.8

26.526.526.5

24.624.624.6

9.2011.2014.20

VF 03 028 FD-164S 1/2" 250 26.9 40.2 37.3 15.10VF 03 029VF 03 030

FD-165SFD-305S

5/8"5/8"

250480

3839

5558

5254

16.7023.00

VF 03 031 FD-307S 7/8" 480 50 74 69 30.50VF 03 032 FD-419S 1-1/8" 705 79 118 110 48.50

Max. working pressure: 35 bar.

CERAMIC DRYER FILTERCatch-All® series

Code Model Connection

Flow rate capacity(kW)

Dimensions (mm) Weight

kg €R134aR407C

R404AR507 R410A L D1

THREADED CONNECTIONSVF 03 541 C-032 1/4" 4.57 3.52 4.92 106 44 0.227 11.20VF 03 544 C-052 1/4" 6.68 4.92 7.03 121 62 0.340 13.90VF 03 546 C-053 3/8" 15.10 10.90 15.80 132 62 0.340 13.50VF 03 547 C-082 1/4" 6.68 4.92 7.03 143 67 0.567 16.10VF 03 548 C-083 3/8" 14.80 10.60 15.50 154 67 0.567 16.80VF 03 549 C-084 1/2" 17.80 20.70 29.90 160 67 0.567 16.60VF 03 551 C-163 3/8" 14.80 10.60 15.50 171 76 0.794 20.70VF 03 552 C-164 1/2" 32.70 23.90 34.20 176 76 0.794 21.70VF 03 553 C-165 5/8" 44.30 32.40 47.10 184 76 0.794 22.30VF 03 555 C-304 1/2" 32.70 23.90 34.50 251 76 1.588 37.20VF 03 556 C-305 5/8" 47.80 34.80 51.00 259 76 1.588 39.80

WELDED CONNECTIONSVF 03 561 C-032-S 1/4" 4.57 3.52 4.92 97 44 0.227 11.20VF 03 563 C-052-S 1/4" 6.68 4.92 7.03 106 62 0.340 13.50VF 03 564 C-053-S 3/8" 15.10 10.90 15.80 109 62 0.340 13.50VF 03 566 C-083-S 3/8" 16.50 12.00 17.60 133 67 0.567 16.60VF 03 570 C-164-S 1/2" 35.50 25.70 37.60 152 76 0.794 21.70VF 03 571 C-165-S 5/8" 51.00 37.30 54.50 160 76 0.794 22.30VF 03 574 C-305-S 5/8" 54.50 39.70 57.70 235 76 1.588 39.80VF 03 575 C-307-S 7/8" 69.60 50.60 73.90 249 76 1.588 44.30VF 03 578 C-417-S 7/8" 71.40 52.00 75.60 249 89 2.040 66.40VF 03 579 C-419-S 1-1/8" 78.40 57.30 83.40 248 89 2.040 68.10



73

BI-FLOW DRYER FILTERFOR HEAT PUMP

FB series

Code Model Connection €

THREADED CONNECTIONS

VF 03 401VF 03 402VF 03 403VF 03 404

FB - 052FB - 163FB - 164FB - 305

1/4"3/8"1/2"5/8"

27.0029.0034.0046.00

WELDED CONNECTIONS

VF 03 410VF 03 419VF 03 411VF 03 412VF 03 413VF 03 414VF 03 415VF 03 416VF 03 417VF 03 418

FB - 052SFB - 162SFB - 083SFB - 163SFB - 084SFB - 164SFB - 165SFB - 305SFB - 307SFB - 309S

1/4"1/4"3/8"3/8"1/2"1/2"5/8"5/8"7/8"

1-1/8"

27.0032.0029.0034.0039.0041.0041.0046.0048.0052.00

V2A Series

Code Model Connec-tion

Capacity (Kw)€

R-22 R134a R404a R407C R410A

THREADED CONNECTIONS

VF 03 651VF 03 652VF 03 653VF 03 654VF 03 655

V2A-083V2A-084V2A-163V2A-164V2A-165

3/8"1/2"3/8"1/2"5/8"

26.540.226.540.255.6

24.637.324.637.351.5

17.826.917.826.937.3

25.238.225.238.252.8

26.540.226.540.252.8

56.0057.4060.7063.8066.30

WELDED CONNECTIONS

VF 03 661VF 03 662VF 03 663VF 03 664VF 03 665

V2A-083SV2A-084SV2A-163SV2A-164SV2A-165S

3/8"1/2"3/8"1/2"5/8"

26.540.226.540.255.6

24.637.324.637.351.5

17.826.917.826.937.3

25.238.225.238.252.8

26.540.226.540.252.8

56.0057.4060.7063.8066.30

Max. working pressure: 35 bar.

DCB series

Code TypeThreaded/Welded

connectionODF/inches

Volu-mecm

Danfoss code€

Threaded Welded

VF 03 151 DCB-162 1/4" 225 23Z1406 — 47.50

VF 03 152DCB-163/S 3/8" 225

23Z1405 —47.50

VF 03 153 — 23Z1467

VF 03 154DCB-164/S 1/2" 225

23Z1404 —47.50

VF 03 155 — 23Z1466

VF 03 156DCB-165/S 5/8" 225

23Z1403 —47.50

VF 03 157 — 23Z1465

VF 03 158 DCB-303 3/8" 480 23Z1409 — 54.90

VF 03 160 DCB-304/S 1/2" 480 — 23Z1470 54.90

VF 03 161 DCB-305/S 5/8" 480 23Z1407 — 54.90

Max. working pressure: 42 bar. *Suitable for all refrigerant gases.



ANTIACID DRYER FILTERSWith solid core for R134A, R404A, R410A…

Code TypeThreaded/Welded

connectionODF/inches

Volu-mecm

Danfoss code€

Threaded Welded

VF 03 211DCL-032/S 1/4" 50

023Z5000 — 11.10

VF 03 212 — 023Z4501 11.10

VF 03 219DCL-033/S 3/8" 50

023Z5001 — 11.10

VF 03 220 — 023Z4504 11.10

VF 03 213DCL-052/S 1/4" 65

023Z5002 — 13.20

VF 03 214 — 023Z4506 13.20

VF 03 221DCL-053/S 3/8" 65

023Z5003 — 13.20

VF 03 222 — 023Z4509 13.20

VF 03 215DCL-082/S 1/4" 100

023Z5004 — 16.10

VF 03 216 — 023Z4511 16.10

VF 03 223DCL-083/S 3/8" 100

023Z5005 — 16.10

VF 03 224 — 023Z4514 16.10

VF 03 229DCL-084/S 1/2" 100

023Z5006 — 16.10

VF 03 230 — 023Z4516 16.10

VF 03 217DCL-162/S 1/4" 225

023Z5007 — 22.00

VF 03 218 — 023Z4518 22.00

VF 03 225DCL-163/S 3/8" 225

023Z5008 — 22.00

VF 03 226 — 023Z4521 22.00

VF 03 231DCL-164/S 1/2" 225

023Z5009 — 22.00

VF 03 232 — 023Z4523 22.00

VF 03 235DCL-165/S 5/8" 225

023Z5010 — 22.00

VF 03 236 — 023Z4524 22.00

VF 03 227DCL-303/S 3/8" 480

023Z0012 — 37.50

VF 03 228 — 023Z4528 37.50

VF 03 233DCL-304/S 1/2" 480

023Z0013 — 39.60

VF 03 234 — 023Z4530 39.60

VF 03 237DCL-305/S 5/8" 480

023Z0014 — 39.60

VF 03 238 — 023Z4531 39.60

VF 03 242 DCL-307/S 7/8" 480 — 023Z4534 39.60

VF 03 239DCL-415/S 5/8" 705

023Z0103 — 60.00

VF 03 240 — 023Z4539 60.00

VF 03 244 DCL-417/S 7/8" 705 — 023Z4540 61.20

SMALL POWER FILTERSCode Model Connection Load Dimensions

mm €

«R-12 / R-22 / R-134a / R-404a» FILTERS

VF 03 041VF 03 040VF 03 042VF 03 047VF 03 043VF 03 044VF 03 045VF 03 046

SM 2/10-XSM 2/15-XSM 2/20-XSM 2/20-XSM 2/30-XSM 2/30-XSM 2/40-XSM 2/40-X

3/16"-Capillary tube3/16"-Capillary tube1/4"-Capillary tube

3/16"-Capillary tube1/4"-1/4"

1/4"-Capillary tube1/4"-1/4"

1/4"-Capillary tube

1015202030304040

16 x 12019 x 14019 x 15519 x 15524 x 15524 x 15524 x 17024 x 170

1.421.781.912.302.802.803.093.09

Flared orwelded joints

DCL seriesMixture of molecule Sieves andActivated Alumina.- Max. working pressure: 42 bar.- Used in solid core DCL.- Recommended for use with

mineral oils and alkylbenzenes and compatible with HCFC, CFC and HFC refrigerants.

- Elimination of humidity and acids before these elements enter the refrigeration system.

Spring

Solid DCLcore

Drilled surface

Polyester filter



75

ROTARY HERMETIC COMPRESSORFOR AIR CONDITIONER

R-22 / Replacement: R424A, R417A, R422A - R422D - R427A, R434A, R438A

Code Model CondenserμF BTU Capacity

(Kcal/h) €

SINGLE-PHASE MOTOR 220 V II 50Hz

MF 15 221MF 15 222MF 15 223MF 15 224MF 15 225MF 15 205MF 15 206MF 15 231

RH 135 VHATRH 145 VHSTRH 165 VHETRH 174 VHETRH 247 VHATPH 33 VPETPH 39 VPETNH 36 VMDT

2525252535506050

7,7778,3729,603

10,11814,60020,04023,05020,435

1,9602,1102,4202,5503,6105,0505,8105,150

156.00162.00168.00184.00210.00305.00320.00328.00

THREE-PHASE MOTOR380 V III 50 Hz

MF 15 211MF 15 212

NH 41 YDTTNH 47 YDTT

24,80028,570

6,2507,200

365.00380.00

Important: Install the condenser of the specified μF - 450 V.

R-407C


(Kcal/h) €

SINGLE-PHASE MOTOR 220/240 V 50Hz

MF 15 251MF 15 252MF 15 253MF 15 254MF 15 255MF 15 256MF 15 257MF 15 258MF 15 259MF 15 260MF 15 261

RE 135VHSMTRE 145 VHSMTRE 165 VHSMTRE 174 VHSMTRE 207 VHSMTRE 231 VHSMTRE 277 VHSMTPE 31 VNEMTPE 33 VPEMTPE 36 VPEMTPE 39 VPEMT

2525252530304045505560

7,6428,2579,4529,964

12,01113,44416,03918,05019,72521,26022,693

1,9102,0652,3652,4903,0003,3604,0004,5104,9305,3155,675

225.00230.00245.00255.00275.00300.00325.00420.00450.00465.00475.00

THREE-PHASE MOTOR380/415 V 50 Hz

MF 15 271MF 15 272MF 15 273MF 15 274

NE 41 YDNMTNE 47 YDNMTNE 52 YDNMTNE 56 YDNMT

––––

24,39928,49432,35134,807

6,1007,1258,0888,700

550.00580.00595.00620.00

Important: Install the condenser of the specified μF - 450 V.




R-410A


(Kcal/h) €

220 V II 50 Hz SINGLE-PHASE MOTOR

MF 15 101 RN092VHSMT 20 7,643 1,926 271.00

MF 15 103 RN099VHSMT 25 8,155 2,055 276.00

MF 15 104 RN104VHSMT 25 8,564 2,159 280.00

MF 15 107 RN125VHSMT 25 10,407 2,623 318.00

MF 15 109 RN135VHSMT 30 11,225 2,829 326.00

MF 15 111 RN145VHSMT 30 12,181 3,070 334.00

MF 15 113 RN165VHSMT 30 13,887 3,500 343.00

MF 15 115 RN196VHSMT 40 16,378 4,128 352.00

MF 15 116 RN220VHSMT 40 18,700 4,713 364.00

MF 15 118 NN23VBAMT 50 19,790 4,988 579.00

MF 15 120 NN27VBAMT 55 22,929 5,779 597.00

MF 15 121 NN29VAAMT 55 25,249 6,364 605.00

MF 15 123 NN33VAAMT 55 28,968 7,301 623.00

MF 15 124 NN37VAAMT 60 32,073 8,084 631.00

MF 15 125 NN40VAAMT 60 34,802 8,772 639.00

TECHNICAL FEATURES

ModelInlet Nominal input Capacity

mF/VACWeight

kgOilCC.

Dimensions (mm)Watts Amp. HP kW A B C D E

RN092VHSMT 770 3.6 0.80 0.60 20/370 13.6 300 213.1 243.8 101.0 60.5 9.6RN099VHSMT 820 3.8 0.87 0.65 25/370 13.6 300 213.1 243.8 101.0 60.5 9.6RN104VHSMT 865 4.0 0.94 0.70 25/370 13.6 300 213.1 243.8 101.0 60.5 9.6RN125VHSMT 1,050 4.9 1.07 0.80 25/370 13.6 300 213.1 243.8 101.0 60.5 9.6RN135VHSMT 1,120 5.2 1.21 0.90 30/370 15.7 520 257.5 260.5 110.5 74.0 12.7RN145VHSMT 1,220 5.8 1.34 1.00 30/370 15.7 520 257.5 260.5 110.5 74.0 12.7RN165VHSMT 1,410 6.6 1.47 1.10 30/400 15.7 520 257.5 260.5 110.5 74.0 12.7RN196VHSMT 1,680 7.9 1.74 1.30 40/370 15.7 520 257.5 260.5 110.5 74.0 12.7NN23VBAMT 1,950 9.2 2.01 1.50 50/400 29.2 1,200 327.8 318.6 – 74.0 16.0NN27VBAMT 2,260 10.4 2.28 1.70 55/400 30.4 1,200 327.8 318.6 – 74.0 16.0NN29VAAMT 2,440 11.2 2.55 1.90 55/400 30.4 1,200 342.8 393.6 – 74.0 16.0NN33VAAMT 2,800 13.1 2.95 2.20 55/420 31.9 1,300 342.8 393.6 – 74.0 16.0NN37VAAMT 3,130 14.7 3.35 2.50 60/420 31.9 1,300 342.8 393.6 – 74.0 19.1NN40VAAMT 3,430 16.1 3.62 2.70 60/420 31.9 1,300 342.8 393.6 – 74.0 19.1

RN NN



77

SCROLL HERMETIC COMPRESSORFOR AIR CONDITIONER

For R-410A

Code Model Btu/h Kcal/h W €

220 V/50 Hz SINGLE-PHASE MOTOR

MF 15 146 AN-30-VBFMT 25,930 6,540 7,600 970.00

MF 15 147 AN-36-VBFMT 37,530 9,460 11,000 1,055.00

380-415/460 V - 50/60 Hz THREE-PHASE MOTOR

MF 15 148 BN-52YFAMT 47,430 11,960 13,900 1,295.00

MF 15 149 BN-62YFAMT 56,640 14,280 16,600 1,370.00

MF 15 151 BN-65YEAMT 60,050 15,133 17,600 1,430.00

STARTER CONDENSATORS FOR COMPRESSORSCode Model Dimensions Power (V) €

VE 01 961VE 01 962VE 01 963VE 01 964VE 01 965VE 01 966VE 01 967VE 01 968VE 01 970VE 01 971VE 01 972VE 01 973VE 01 974VE 01 975VE 01 977VE 01 978VE 01 979VE 01 980VE 01 981VE 01 982VE 01 986VE 01 983VE 01 987VE 01 988VE 01 989VE 01 990VE 01 991VE 01 992

1.5 MF2 MF2.5 MF3 MF4 MF5 MF6 MF8 MF10 MF12 MF14 MF16 MF18 MF20 MF25 MF30 MF35 MF40 MF45 MF50 MF55 MF60 MF65 MF70 MF75 MF80 MF90 MF100 MF

28 x 5528 x 5528 x 5528 x 5528 x 5528 x 5532 x 5532 x 5536 x 5536 x 7036 x 7040 x 7040 x 7040 x 7040 x 9340 x 9345 x 9345 x 93

45 x 11945 x 11950 x 11950 x 11955 x 11855 x 11860 x 11860 x 11865 x 11865 x 118

450450450450450450450450450450450450450450450450450450450450450450450450450450450450

5.505.505.505.505.856.156.608.008.85

10.0010.5011.6012.3513.6015.4016.6519.6021.4024.6526.1027.6028.6530.8532.1533.9035.0039.4542.00

DISCHARGE TUBE

DISCHARGE TUBE

SUCTION TUBE

SUCTION TUBE

- 6.35 Faston- M8 threaded salient

(VDE)




R-407C High and medium temperature

Code Model CondenserμF

Cylind.cm³

Capacity(W) €


MF 60 102MF 60 104MF 60 113MF 60 106MF 60 108MF 60 109

CG633GB1-ACSL211CVCHZ33LC4-UCHY33M-UCHV33YC6-UCTHU33W

353550505560

16.721.128.630.741.748.8

2,7803,5504,8705,2507,1508,200

302.00361.00402.00408.00577.00713.00

R-410A High and medium temperature

Code Model CondenserμF

Cylind.cm³

Capacity(W) €


MF 60 202MF 60 211MF 60 204MF 60 206MF 60 207MF 60 210MF 60 209

ASG108CVASL145SVASL155SVASH218SVASH264SVATH290CVATH325CV

35353560506060

10.814

15.521.826.429

32.5

2,5503,3703,7005,1806,3107,1257,760

350.00378.00397.00448.00600.00624.00737.00

DIMENSIONS

Model A B

R407C GAS

CG433E 256 118.6

CG633G 264 118.6

CSL211CV 278.4 129.1

CHY33M-U 293.4 139.1

CHW33T 338.9 139.1

CHV33Y 338.9 139.1

CTHU33W 372.7 139.1

R410A GAS

ASG108CV 247 119.2

ASL145SV 279 129.1

ASL155SV 279 129.1

ASH218SV 298.5 140.1

ASH264SV 298.5 140.1

ATH290CV 298.5 140.1

ATH325CV 358 140.1



79


For R407C gas - High single-phase

Code Model HP Cylind.cm³

CondenserμF

Capacity (kW) €

230 V - 50 Hz SINGLE-PHASE MOTORMF 61 001 C-SBS120H15A 3.1 55.7 60 9.6 997.31MF 61 002 C-SBS145H15A 4 66.8 60 11.8 1,103.08MF 61 003 C-SBS165H15A 4.5 77.4 70 13.7 1,226.81MF 61 004 C-SBS180H15A 5 83.2 70 14.7 1,299.53MF 61 005 C-SBS200H15A 5.8 93.1 70 16.4 1,608.97

For R407C gas - High three-phase


Capacity(kW) €

400 V - 50 Hz THREE-PHASE MOTORMF 61 101 C-SBN263H8A 3.5 55.7 9.6 997.31MF 61 102 C-SBN303H8G 4 66.8 11.6 1,109.70MF 61 103 C-SBN353H8A 4.5 77.4 13.4 1,283.85MF 61 104 C-SBN373H8A 5 83.2 14.5 1,340.13MF 61 105 C-SBN453H8G 6 100 17.6 1,367.37MF 61 106 C-SBS235H38B 7 110.2 19.5 1,514.19MF 61 107 C-SCN603H8H 8 137 24.5 2,030.51MF 61 108 C-SCN753H8K 10 171.2 29.9 2,661.31MF 61 109 C-SCN903H8K 12 205.4 34.9 2,833.27

COOLING POWERARI conditions: Evaporation temp.: 7.2 °C - Condensation temp.: 54.4 °C - Liquid temp.: 46.1 °C - Return gas temp.: 18.3 °C - Ambient temp.: 35 °C.

For R410A gas - High single-phase


CondenserμF

Capacity (kW) €

230 V - 50 Hz SINGLE-PHASE MOTORMF 61 202 C-SBP120H15A HI-COP 3.5 39.9 60 9.8 1,175.52MF 61 203 C-SBP140H15A HI-COP 4 46.4 60 11.6 1,264.75MF 61 204 C-SBP160H15A HI-COP 4.6 51.8 60 13 1,304.49

For R410A gas - High three-phase


Capacity(kW) €

400 V - 50 Hz THREE-PHASE MOTORMF 61 301 C-SBP120H38B 3.5 39.6 10 1,175.52MF 61 302 C-SBP140H38B 4 46.4 11.7 1,264.75MF 61 303 C-SBP160H38B 4.6 52 13.2 1,304.49MF 61 304 C-SBP170H38B 5 54.8 13.9 1,379.20MF 61 305 C-SBP205H38B 6 66.8 16.9 1,438.52MF 61 306 C-SCP270H38B HI-COP 8 89.2 22.4 3,001.42MF 61 307 C-SCP315H38B HI-COP 10 104.1 26 3,084.88MF 61 308 C-SCP360H38B HI-COP 11 120.2 29.8 3,168.33MF 61 309 C-SCP400H38B HI-COP 12 131.9 32.8 3,251.78MF 61 310 C-SCP510H38B HI-COP 15 171.2 43.9 3,763.55

COOLING POWERARI conditions: Evaporation temp.: 7,2 °C - Condensation temp.: 54.4 °C - Liquid temp.: 46.1 °C - Return gas temp.: 18.3 °C - Ambient temp.: 35 °C.




For R407C gas - Three-phase heat pump


Capacity (kW)€

Cooling Heating

380/415 V THREE-PHASE MOTOR

MF 61 321 C-SBS120H38Q EVI 3.5 55.7 9.6 11.1 1,306.57

MF 61 322 C-SBS145H38Q EVI 4 66.8 11.6 13.3 1,418.86

MF 61 323 C-SBS180H38Q EVI 5 83.2 14.5 16.8 1,577.96

MF 61 324 C-SBS205H38Q EVI 6 96.2 17.5 16.9 1,781.18

MF 61 325 C-SCS295H38Q EVI 8 137 24.5 27.6 3,454.50

MF 61 326 C-SCS370H38Q EVI 10 171.2 29.9 33.7 3,573.37

MF 61 327 C-SCS435H38Q EVI 12 205.4 35.2 35 3,509.96

For R410A gas - Inverter


Capacity(kW) €

230V SINGLE-PHASE

MF 61 342 C-SDP205H03B 6 42.3 16.9 2,304.00

380/415 V THREE-PHASE

MF 61 352 C-SDP205H02B 6 42.3 13.9 2,304.00

COOLING POWERARI conditions: Evaporation temp.: 7.2 °C - Condensation temp.: 54.4 °C -Liquid temp.: 46.1 °C - Return gas temp.: 18.3 °C - Ambient temp.: 35 °C.

SCROLL HERMETIC COMPRESSORFOR COOLING

For R404A gas - Low three-phase


Capacity (kW) €

380-415 V - 50 Hz THREE-PHASE MOTOR

MF 61 401 C-SBN303L8A 4 66.8 5.3 1,376.03

MF 61 402 C-SBN373L8A 5 83.2 6.8 1,439.09

MF 61 403 C-SCN453L8H 6 104 8.1 4,168.69

MF 61 404 C-SCN523L8H 7 120 9.25 4,242.10

MF 61 405 C-SCN603L8H 8 137 10.5 4,315.43

MF 61 406 C-SCN753L8H 10 171.2 13.05 4,447.54



81

«R-134a» HERMETIC COMPRESSORS

Low temperature

Code Model CV Ref.Comp.

Cylind.cm Motor Height

Capacity in Watts€

-30 °C -20 °C -15 °C -10 °C

220 V 50 Hz SINGLE-PHASE

MF 11 184 EMT-36HLP 1/6 C 3.97 RSIR 166 74 130 179 220 117.00

MF 11 185 EMT-43HLP 1/5 C 4.85 RSIR 166 91 159 218 260 118.50

MF 11 164 EMT-49HLP 1/6 C 5.56 RSIR - 99 170 218 275 108.40

MF 11 151 EMT-60HLP 1/5 C 6.76 RSIR - 131 209 272 346 126.90

MF 11 163 NB-2112-Z 1/5 S 6.27 CSIR 177 91 168 - 280 170.80

MF 11 167 NB-2118-Z 1 S 8.07 CSIR - - 199 244 321 176.51

MF 11 154 NB-1116-Z 1/4 S 8.38 CSIR 187 122 219 - 360 144.50

MF 11 155 NB-1118-Z 1/4 S 8.07 RSIR 187 127 243 - 400 148.20

MF 11 157 NE-2121-Z 1/3 F 9.27 CSIR 200 170 303 - 497 203.60

MF 11 158 NE-2130-Z 3/8 F 12.12 CSIR 200 237 409 - 660 206.90

MF 11 168 NEK-2140-Z 1/2 F 16.8 CSIR 206 318 520 - 848 246.30

MF 11 161 T-2140-Z 1/2 F 22.40 CSIR 221 327 547 - 986 282.20

High temperature

Code Model CV Ref.Comp.

Cylind.cm Motor Height


-10 °C 0 °C +5 °C

220 V 50 Hz SINGLE-PHASE

MF 11 131 EMT-37HDP 1/8 S 3.40 RSIR - - 320 392 105.70

MF 11 186 EMT-45HDR 1/8 S 3.97 CSIR - - 359 439 130.07

MF 11 132 EMT-50HDP 1/5 F 4.50 RSIR - 238 365 446 111.20

MF 11 191 EMT-6144Z 1/5 F 5.20 CSIR - 321 494 601 124.07

MF 11 135 EMT-6160-Z 1/4 F 6.76 CSIR 187 294 505 636 138.30

MF 11 136 EMT-6170-Z 1/4 F 7.96 CSIR 187 335 570 718 141.60

MF 11 137 NEK-6187-Z 1/3 F 9.9 CSIR 187 494 809 1,006 170.40

MF 11 143 NEK-6210-Z 1/3 F 12.11 CSIR - 534 861 1,050 171.45

MF 11 138 T6213-Z 1/2 F 17.4 CSIR 206 - 1,068 1,335 230.40

MF 11 142 NT6217-Z 3/4 F 20.44 CSIR - - 1,188 1,472 399.38

MF 11 140 NJ-6220-Z 3/4 F 26.11 CSIR 265 1,101 1,881 2,330 413.80

MF 11 141 NJ-6226-Z 1 F 34.37 CSIR 253 1,347 2,226 2,732 431.60

THREE-PHASE 380V 50Hz

MF 11 181 NJ-6220-ZX 3/4 S 26.11 3-FASE 265 1,101 1,881 2,330 445.10

MF 11 182 NJ-6226-ZX 1 F 34.37 3-FASE 265 1,347 2,226 2,732 406.90



HERMETIC COMPRESSORS

R134a - Low temperature (-35 to -10 °C)

Code Model PowerCV

Cylind.cm³

Connections Capacity (W)€

Suct. Disc. -10 °C -25 °C -35 °C

230 V - 50 Hz SINGLE-PHASEMF 10 565 THG1335Y 1/8 3.58 1/4" 3/16" 175 80 35 145.00MF 10 568 THG1365Y 1/5 6.90 1/4" 3/16" 280 130 60 150.00MF 10 569 AEZ1365Y 1/4 8.80 1/4" 3/16" 290 135 70 156.30MF 10 571 AEZ2380Y 1/4 9.40 1/4" 3/16" 420 210 90 173.00MF 10 575 CAE2412Y 1/3 14.20 5/16" 1/4" 660 270 100 215.40MF 10 576 CAE2414Y 3/8 16.20 3/8" 1/4" 730 300 125 232.10

R134a - High temperature (-15 to +15 °C)

Code Model PowerCV

Cylind.cm³


Suct. Disc. +7.2 °C 0 °C -5 °C -10 °C

230 V - 50 Hz SINGLE-PHASEMF 10 589 THB4419Y 1/5 5.20 1/4" 3/16" 440 320 250 190 145.90MF 10 591 THB4422Y 1/4 6.10 1/4" 3/16" 530 390 320 250 152.30MF 10 593 AEZ4425Y 1/4 7.60 1/4" 3/16" 640 460 350 260 161.50MF 10 594 AEZ4430Y 1/4 8.80 1/4" 3/16" 780 560 430 330 173.80MF 10 595 CAE4440Y 3/8 12.05 5/16" 1/4" 1,030 730 560 420 202.00MF 10 597 CAE4456Y 3/8 16.20 3/8" 1/4" 1,400 1,010 790 600 244.00MF 10 598 CAJ4461Y 1/2 18.30 1/2" 1/4" 1,570 1,120 860 640 364.10MF 10 600 CAJ4492Y 3/4 25.95 1/2" 5/16" 2,300 1,620 1,220 870 430.40MF 10 601 CAJ4511Y 1 32.70 5/8" 5/16" 3,030 2,160 1,650 1,230 484.50MF 10 602 FH4518Y 1-1/2 53.20 5/8" 1/2" 4,580 3,200 2,370 1,650 725.10

R404A/R507A - High temperature (-15 to +10 °C). Heat pump

Code Model PowerCV

Cylind.cm³


Suct. Disc. +7.2 °C 0 °C -5 °C -10 °C

230 V - 50 Hz SINGLE-PHASEMF 10 662 AEZ4430Z 1/4 5.70 1/4" 3/16" 740 550 440 350 173.40MF 10 664 AEZ4440Z 1/3 7.60 3/8" 1/4" 1,000 740 590 460 199.50MF 10 668 CAE9460Z 1/2 11.30 3/8" 1/4" 1,520 1,100 860 660 281.70MF 10 670 CAJ9480Z 5/8 15.20 1/2" 5/16" 2,060 1,490 1,170 910 447.80MF 10 671 CAJ9510Z 3/4 18.30 5/8" 5/16" 2,580 1,870 1,480 1,150 475.20MF 10 672 CAJ9513Z 1 24.20 5/8" 5/16" 3,145 2,260 1,770 1,350 499.00MF 10 673 CAJ4517Z 1-1/4 25.95 5/8" 3/8" 3,700 2,680 2,100 1,610 502.10MF 10 674 CAJ4519Z 1-1/2 34.45 5/8" 3/8" 4,780 3,470 2,740 2,120 531.20

R404A/R507A - Low temperature (-40 to -10 °C)

Code Model PowerCV

Cylind.cm³

Connections (ODF) Capacity (W)€

Suct. Disc. -10 °C -25 °C -35 °C

230 V - 50 Hz SINGLE-PHASEMF 10 714 CAE2420Z 3/8 12.60 3/8" 1/4" 1,050 500 230 236.10MF 10 715 CAE2424Z 1/2 15.10 3/8" 1/4" 1,270 570 290 309.30MF 10 717 CAJ2432Z 5/8 18.30 1/2" 5/16" 1,590 690 310 407.90MF 10 719 CAJ2446Z 3/4 26.20 1/2" 5/16" 2,320 1,090 550 451.90MF 10 720 CAJ2464Z 1-1/4 34.50 5/8" 3/8" 3,030 1,475 760 479.40



83


Conservation / Freezing «R-134a»

Code Model CV CoolingComp.

Cyl.m³ Motor Height


+5 °C 0 °C -10 °C -20 °C -30 °C

220 V 50 Hz SINGLE-PHASEMF 09 171 TL4G 1/8 F 3.86 CSIR 170 273 222 138 78 43 195.40MF 09 172 TL5G 1/4 F 5.08 CSIR 170 346 283 178 103 56 197.70MF 09 177 FR6G 1/4 F 6.24 CSIR 196 449 355 221 128 44 177.50MF 09 178 FR7,5G 1/4 F 6.93 CSIR 196 514 420 261 143 66 180.40MF 09 179 FR8,5G 1/4 F 7.95 CSIR 196 580 474 300 172 84 182.20MF 09 180 FR10G 3/8 F 9.05 CSIR 196 636 514 323 188 93 189.80MF 09 182 FR11G 3/8 F 11.15 CSIR 196 780 628 395 233 115 191.70MF 09 185 SC10G 3/8 F 10.3 CSIR 199 764 618 369 183 60 221.90MF 09 188 SC12G 3/8 F 12.9 CSIR 209 960 785 484 257 115 234.50MF 09 189 SC15G 3/8 F 15.3 CSIR 209 1,113 915 579 322 147 289.30MF 09 190 SC18G 1/2 F 17.7 CSIR 219 1,337 1,087 684 394 192 312.60MF 09 191 SC21G 5/8 F 20.95 CSIR 219 1,560 1,268 792 453 245 367.30

Freezing «R-404A/R-449A/R-407A»

Code Model CV CoolingComp.

Cyl.m³ Motor Height


-30 °C -20 °C -10 °C

220 V 50 Hz SINGLE-PHASEMF 09 200 SC10CL 3/8 F 10.3 CSIR 209 241 459 749 265.00MF 09 201 SC12CL 3/8 F 12.9 CSIR 209 348 619 961 266.00MF 09 202 SC15CL 1/2 F 15.3 CSIR 219 438 753 1,155 277.60MF 09 203 SC18CL 1/2 F 17.9 CSIR 219 525 881 1,332 380.20MF 09 204 SC21CL 5/8 F 20.9 CSR 259 – 810 1,610 405.40

Conservation «R134a»

Code Model PowerCV

Cyl.cm³

Capacity (W) Motor type €

7.2 °C 0 °C -5 °C -10 °C

220V - 50 Hz SINGLE-PHASEMF 40 031 NE5170CZ 1/4+ 9.8 910 670 550 420 RSIR 133.70MF 40 032 NE6188CZ 1/3 12 1,100 830 665 520 CSIR 156.70MF 40 033 NE6210CZ 3/8 14.2 1,300 965 758 575 CSIR 172.00




MTZ-VI compressors for R-404A/R-507/R-134a and R-407C


PowerV

Refrige-rant


+5 °C 0 °C -5 °C -10 °C

MF 14 214 MTZ - 22 1-3/4 38.12 400 TR134AR407CR404A

2,9604,2905,720

2,2503,2904,670

1,6702,5003,770

1,190–

3,0001,569.00

MF 14 217 MTZ - 28 2 48.06 400 TR134AR407CR404A

3,7205,4707,210

2,8304,2606,010

2,1303,2304,940

1,570–

4,0101,323.00

MF 14 220 MTZ - 32 2-1/4 53.86 400 TR134AR407CR404A

4,3706,1908,220

3,3204,8306,800

2,4703,6605,550

1,790–

4,4601,439.00

MF 14 222 MTZ - 36 3 60.47 400 TR134AR407CR404A

5,3807,1709,020

4,2505,6907,530

3,3004,4006,200

2,510–

5,0301,416.00

MF 14 224 MTZ - 40 3-1/2 67.89 400 TR134AR407CR404A

5,8108,230

10,090

4,7206,6008,450

3,7705,1806,990

2,960–

5,7101,066.70

MF 14 226 MTZ - 50 4 85.64 400 TR134AR404AR407C

7,14011,34010,010

5,4708,9307,750

4,1006,9305,840

2,9905,290

–1,192.10

MF 14 228 MTZ - 64 5 107.71 400 TR134AR404AR407C

9,17014,54012,990

7,02011,96010,100

5,2409,2407,660

3,7807,160

–1,508.10

MF 14 230 MTZ - 80 6-1/2 135.78 400 TR134AR404AR407C

12,13018,39016,600

9,48014,91013,110

7,25011,89010,100

5,3809,280

–1,956.70

MF 14 232 MTZ - 100 8 171.26 400 TR134AR404AR407C

13,78021,75019,680

10,63017,29015,360

8,02013,52011,740

5,88010,390

–2,655.40

MF 14 234 MTZ - 125 10 215.44 400 TR134AR404AR407C

16,94027,69026,160

13,08022,25020,690

9,84017,64016,050

7,15013,760

–3,005.80

MF 14 236 MTZ - 160 13 271.55 400 TR134AR404AR407C

23,14035,44038,650

18,23028,65026,910

14,12022,86021,150

10,72017,970

–3,538.40

Accessories

Code Applications €“ROTALOCK” SERVICE VALVES (*)

VF 01 602VF 01 601VF 01 603VF 01 602VF 01 605VF 01 604VF 01 607VF 01 609VF 01 604VF 01 608VF 01 610VF 01 611VF 01 612

V06 for MT/MTZ-18/22/28. Suct. 1/2 V01 for MT/MTZ-18/22/28. Comp. 3/8V09 for MT/MTZ-32/LT-22, MT/MTZ-36/LT-28, MT/MTZ-40. Suct. 5/8V06 for MT/MTZ-32/LT-22, MT/MTZ-36/LT-28, MT/MTZ-40. Comp. 1/2V07 for MT/MTZ-50/LT-40, MT/MTZ-64/LT-44. Suct. 7/8V04 for MT/MTZ-50/LT-40, MT/MTZ-64/LT-44. Comp. 3/4V02 for MT/MTZ-80, LTZ-50-88-100, MT/MTZ-100/125/160. Suct. 1-1/8V05 for MT/MTZ-100, 125, 160. Comp. 7/8V04 for MT/MTZ-50, 64, 80 and LTZ-40, 44, 50, 88, 100. Comp. 3/4SE-35 Inlet 1-3/4"R Outlet 1-3/8"SSE-36 Inlet 1-3/4"R Outlet 1-5/8"SSE-41 Inlet 2-1/4"R Outlet 1-5/8"SSE-44 Inlet 1-3/4"R Outlet 2-1/8"S

12.4012.4017.6012.4025.2018.0026.7028.7018.0037.6642.6059.8062.10

JOINTS FOR ROTALOCKVF 01 621VF 01 622VF 01 623VF 01 624

1" joint1-1/4" joint1-3/4" joint2-1/4" joint

1.501.802.102.35

SELF-ADJUSTABLE CRANKCASE HEATERMF 14 801 PTC 35 W for MT/MTZ-22 to 40/LTZ-22 to 100 36.80

ACCESSORY KIT

MF 14 805MF 14 806MF 14 807

• Includes: 4 rubber feet, protection cover and 2 nuts with jointsAccessory kit for MTZ 18 to 40Accessory kit for MTZ 44 to 72Accessory kit for MTZ 80 to 160

25.0035.0040.00

- Temperature range:R134a from -15 °C to+20 °C, R404a from -25 °C to +10 °C.

- Indicated performance:+55 °C condensation temperature.

- Overheating: 11 K.

- Subcooling: 8.3 K.



85

«SCROLL PERFORMER»HERMETIC COMPRESSORS

SM compressors for R22 - High temperature


PowerV


+5 °C 0 °C -5 °C

TO THREADMF 14 902 SM110 8 144.2 400T 23,800 19,600 15,900 3,451.60MF 14 903 SM120 10 166.6 400T 27,600 22,800 18,600 3,604.40

SH compressors for R410A - High temperature


PowerV


+5 °C 0 °C -5 °C

TO THREADMF 14 951 SH090 7.5 88.4 400T 18,135 15,029 12,337 3,544.50MF 14 952 SH105 8 103.5 400T 18,247 15,078 12,309 4,049.10MF 14 953 SH120 10 116.9 400T 24,359 20,192 16,577 4,228.30MF 14 955 SH161 13 151.7 400T 31,562 26,204 21,559 5,141.10MF 14 958 SH180 15 170.4 400T 36,158 29,888 24,433 6,091.90MF 14 960 SH240 20 227.6 400T 48,700 40,061 33,512 9,219.90MF 14 962 SH300 25 285.5 400T 61,236 51,002 42,133 10,959.50

SZ compressors for R134A/R407


PowerV


Gas +5 °C 0 °C -5 °C

TO THREAD

MF 14 930 SZ090 7.5 120.5 400TR134A 13,200 10,700 8,500

2,916.70R407C 18,500 15,000 12,000

MF 14 931 SZ110 8 144.2 400TR134A 16,000 13,000 10,400

3,321.30R407C 22,300 18,100 14,500

MF 14 932 SZ120 10 166.6 400TR134A 18,400 14,900 11,900

3,468.40R407C 26,100 21,200 17,000

MF 14 933 SZ160 13 216.6 400TR134A 24,500 19,800 15,800

4,230.50R407C 35,200 28,800 23,200

MF 14 934 SZ185 15 249.9 400TR134A 27,700 22,400 17,800

4,808.40R407C 39,200 32,000 25,700

MF 14 937 SZ240 20 347.8 400TR131A 33,303 26,911 21,524

6,411.80R407C 48,914 39,810 32,010

MF 14 938 SZ300 25 437.5 400TR131A 41,537 33,579 26,869

8,715.00R407C 60,389 49,532 40,245

MF 14 939 SZ380 30 531.2 400TR131A 52,249 42,455 34,127

10,863.00R407C 81,755 67,256 54,766

Calculated performance to:

- Overheating 11K- Subcooling 8.3K- Condensation temp. 55 °C

TANDEM COMPRESSORS

Model Composition

SM/SZ 320 S160+S160

SM/SZ 370 S185+S185

DIMENSIONS D H H1 H2S084 / S090 / S100 254 508 142 465S110/S120 254 558 178 515S148/S161 266 591 180 556

DIMENSIONS D H H1 H2S115/S125 254 586 180 538S160 266 631 180 596S175/S185 316 678 180 641

DIMENSIONS D H H1 H2S240 344 729 196 656S300 344 740 196 667



HERMETIC COMPRESSORSHigh temperature series (R-407C-R404A)

Code Model CV Cylind.cm³

PowerV

Cool. cap. ARI

W€

220 V II SINGLE-PHASE

MF 16 131 H79B17UABH 1.25 32.27 220 II 3,630 782.84

MF 16 132 H79B20UABH 1.5 36.69 220 II 4,297 820.47

MF 16 134 H79B24UABH 2 41.93 220 II 5,070 862.43

MF 16 135 H79B28UABH 2.25 47.5 220 II 5,996 926.10

MF 16 137 H79B32UABH 2.5 53.4 220 II 6,863 1,010.02

MF 16 138 H79B35UABH 2.75 57.66 220 II 7,706 1,050.54

MF 16 139 H73A383ABK 3 66.18 220 II 8,092 1,073.68

MF 16 140 H73A423ABK 3.25 72.56 220 II 8,739 1,134.47

MF 16 141 H73A463ABK 3.5 77.81 220 II 9,800 1,206.81

220V III THREE-PHASE

MF 16 261 H79B22UDBL 2 42.4 220 III 4,967 1,211.17

MF 16 262 H79B28UDBL 2.25 50.1 220 III 5,983 1,283.49

MF 16 263 H79B32UDBL 2.75 54.1 220 III 7,112 1,290.73

MF 16 264 H73A383DBL 3 66.18 220 III 7,992 1,308.11

MF 16 265 H73A423DBL 3.25 72.56 220 III 8,867 1,475.97

MF 16 266 H73A463DBL 3.5 77.81 220 III 9,861 1,513.59

MF 16 267 H73A543DBL 4 90.91 220 III 11,633 1,917.30

MF 16 268 H73A623DBL 5 101.06 220 III 13,050 2,017.15

MF 16 269 H79A723DBL 6 117.12 220 III 17,434 2,520.71

MF 16 270 H78G094DBD RSG 7.5 167.40 220 III 19,500 3,494.74

MF 16 271 H78G104DBD RSG 9 190.50 220 III 21,912 4,006.02

MF 16 272 H78G124DBD RSG 10 219.51 220 III 25,955 4,642.11

MF 16 273 H75G144DBD RSG 12 246.47 220 III 31,472 4,714.29

MF 16 274 H7NG184DPD RSG 15 334.79 220 III 40,514 8,112.80

MF 16 275 H7NG204FRD RSG 18 381.65 220 III 45,096 8,945.89

MF 16 276 H7NG244FRD RSG 20 439.00 220 III 54,586 9,544.37

MF 16 277 H7NG294FPD RSG 25 508.11 220 III 61,800 10,294.75

380V III THREE-PHASE

MF 16 153 H79B22UDBV 2 42.4 380 III 4,957 1,156.15

MF 16 154 H79B28UDBV 2.25 50.1 380 III 5,967 1,221.30

MF 16 157 H79B32UDBV 2.75 54.1 380 III 7,100 1,229.97

MF 16 158 H73A383DBE 3 66.18 380 III 7,843 1,245.88

MF 16 159 H73A423DBE 3.25 72.56 380 III 8,792 1,405.05

MF 16 160 H73A463DBE 3.5 77.81 380 III 9,686 1,442.68

MF 16 162 H73A543DBE 4 90.91 380 III 11,483 1,826.15

MF 16 164 H73A623DBE 5 101.06 380 III 12,925 1,921.64

MF 16 165 H79A723DBV 6 117.12 380 III 17,434 2,330.68

MF 16 166 H7BG094DBE 7.5 167.40 380 III 19,558 3,488.67

MF 16 167 H7BG104DBE 9 190.50 380 III 22,855 3,931.05

MF 16 168 H7BG124DBE 10 219.51 380 III 26,659 4,634.73

MF 16 169 H75G144DBE 12 246.47 380 III 31,472 4,710.42

MF 16 170 H7NG184DPE 15 334.79 380 III 40,514 7,958.13

MF 16 171 H7NG204DRE 18 381.65 380 III 46,521 8,930.52

MF 16 172 H7NG244DPE 20 439.00 380 III 54,586 9,531.16

MF 16 173 H7NG294DPE 25 508.11 380 III 62,199 10,129.77

ARI conditions:

- Evaporation temp. +7.2 °C- Condensation temp. 54.4 °C- Ambient temp. 35 °C- Liquid temp. 46.1 °C- Return gases temp. 18.3 °C

Crankcase resistanceincorporated inall compressors



87


Heat and air pump series (R-407C)

Code Model Cylind.cm³

PowerV

Cap. in W€

Cooling B. Heat

220 V II SINGLE-PHASE

MF 16 241 H71J193ABH 35.1 220 I 4,000 3,300 904.39

MF 16 242 H71J233ABK 42.8 220 I 5,300 4,900 947.80

MF 16 243 H71J273ABK 47.8 220 I 6,100 5,200 1,070.80

MF 16 244 H71J323ABK 53.2 220 I 7,100 5,700 1,148.92

MF 16 245 H71J383ABK 63.6 220 I 8,700 7,200 1,160.51

380 V III THREE-PHASE

MF 16 246 H71J233DBV 42.8 380 III 5,300 4,900 1,300.88

MF 16 247 H71J253DBV 45.3 380 III 5,500 4,700 1,347.18

MF 16 248 H71J323DBV 53.2 380 III 7,200 6,000 1,367.44

MF 16 249 H71J363DBV 60.1 380 III 8,100 6,800 1,412.29

MF 16 250 H71J383DBV 63.6 380 III 8,700 7,200 1,445.58

MF 16 252 H71J433DBV 70.6 380 III 9,700 8,000 1,480.31

«ISOBUTANO R-600a»HERMETIC COMPRESSOR

Low temperature

Code Model CV Cylind.cm³

Capacity (W)€

-35 °C -25 °C -20 °C

230/240 V 50 HZ SINGLE-PHASE

MF 11 312 EMX46CLC 1/8 7.96 68 127 165 140.66

MF 11 313 EMX55CLC 1/5 9.04 76 140 182 149.00

MF 11 314 NBT1116Y 1/4 12.13 90 180 230 153.00

MF 11 315 NBY1118Y 1/3 14.30 116 214 274 187.00

Former model New model

BPE1072Y EMY32CLC

BPE1084Y EMY40CLC

EM series



«SCROLL» COMPRESSORSAIR CONDITIONER

Gas R-407C

Code Model CV Cylind.m³/h

Motor type


+5 °C 0 °C -5 °C -10 °C

TO WELD

MF 19 551 ZR-18-K4E 1.5 4.35 PFJ 3,750 3,050 2,450 1,930 1,160.00

MF 19 552ZR-22-K3E 1.8 5.34

PFJ4,550 3,650 2,900 2,270

1,270.00

MF 19 553 TFD 1,300.00

MF 19 554ZR-28-K3E 2.5 6.83

PFJ5,900 4,750 3,800 2,950

1,350.00

MF 19 555 TFD 1,360.00

MF 19 556ZR-34-K3E 3 8.03

PFJ7,000 5,650 4,500 3,500

1,410.00

MF 19 557 TFD 1,430.00

MF 19 558ZR-40-K3E 3.5 9.44

PFJ8,200 6,650 5,300 4,150

1,510.00

MF 19 559 TFD 1,530.00

MF 19 560ZR-48-K3E 4 11.93

PFJ10,200 8,300 6,750 5,350

1,650.00

MF 19 561 TFD 1,690.00

MF 19 562 ZR-61-KCE 5 14.4 TFD 12,450 10,000 7,950 6,200 1,940.00

MF 19 564ZR-72-KCE 6 17.0

TFD14,750 12,100 9,700 7,550

2,140.00

MF 19 565 TF5 2,170.00

MF 19 566ZR-81-KCE 6.5 19.2

TFD16,700 13,600 10,900 8,550

2,410.00

MF 19 567 TF5 2,440.00

TO THREAD

MF 19 568 ZR-90-K3E 8 20.9 TWD 18,700 15,200 12,150 9,550 4,200.00

MF 19 572 ZR-12-M3E 10 28.8 TWD 26,300 21,600 17,600 14,100 5,630.00

MF 19 578 ZR-250-KCE 20 55.3 TWD 52,000 42,500 34,500 27,500 8,290.00

ACCESSORIES

MF 19 521MF 19 523MF 19 522MF 19 524MF 19 533

MF 19 526MF 19 534MF 19 525MF 19 535MF 19 536

• Single-phase equipment (run capacitor)ZR 18/22 K3 modelZR 28 K3 modelZR 34 K3 modelZR 40 K3 modelZR 48 K3 model• Crank case resistanceZR 18 (40 W) to 240 V II modelZR-22/81 (59/70 W) to 240 V II modelZR 94/190 (90 W) to 240 V II modelZR-250 (120 W) to 240 V II modelZR-310/380 to 240 V II model

72.0072.0080.3081.9090.10

71.5071.5079.10

117.00127.00

VOLTAGE

Compressor Volt. +/-Hz

PFJTFD/TWD

TF5TWR

220-240/1/50380-420/3/50200-220/3/50220-240/3/50

TFD/TWDPFJ

460/3/60265/1/60

Condensation temp. +50 °CSuction temp. +25 °COverheating 10 K



89

«SCROLL» COMPRESSORSAIR CONDITIONER

Gas R-410A

Code Model CV Cylind.m³/h

Motor type


+5 °C 0 °C -5 °C -10 °C

TO WELD

MF 19 631ZP-23-K3E 1.9 4.07

PFJ5,000 4,100 3,350 2,690

1,390.00

MF 19 632 TFD 1,410.00

MF 19 633ZP-26-K3E 2.2 4.42

PFJ5,450 4,500 3,650 2,950

1,460.00

MF 19 634 TFD 1,480.00

MF 19 635ZP-32-K3E 2.6 5.37

PFJ6,750 5,650 4,550 3,500

1,590.00

MF 19 636 TFD 1,610.00

MF 19 637ZP-41-K3E 3.4 6.87

PFJ8,800 7,250 5,950 4,800

1,730.00

MF 19 638 TFD 1,750.00

MF 19 639 ZP-54-K3E 4.6 9.44 TFD 11,750 9,850 8,100 6,550 2,060.00

MF 19 640 ZP-61-KCE 5 8.93 TFD 13,050 10,700 8,600 6,700 2,160.00

MF 19 641 ZP-72-KCE 5.5 11.68 TFD 15,400 12,800 10,550 8,650 2,410.00

MF 19 642 ZP-83-KCE 6.5 13.43 TFD 17,700 14,650 12,050 9,750 2,620.00

TO THREAD

MF 19 651 ZP-90-KCE 7.5 14.64 TFD 19,200 15,900 12,900 10,300 3,400.00

MF 19 652 ZP-103-KCE 9 16.76 TFD 22,400 18,600 15,200 12,100 4,200.00

MF 19 653 ZP-120-KCE 10 19.76 TFD 26,000 21,600 17,600 14,150 4,590.00

MF 19 654 ZP-137-KCE 12 22.12 TFD 29,300 24,300 19,900 16,100 4,890.00

MF 19 655 ZP-182-KCE 15 29.08 TFD 39,100 32,700 27,100 22,200 5,580.00

MF 19 656 ZP-235-KCE 20 36.33 TWD 50,500 42,000 34,500 28,100 8,870.00

MF 19 657 ZP-295-KCE 25 46.7 TWD 63,500 53,000 44,000 36,000 9,640.00

MF 19 658 ZP-385-KCE 30 60.79 TWD 82,500 68,500 56,500 46,500 11,230.00

ACCESSORIES

MF 19 661MF 19 662MF 19 663MF 19 664

• Single-phase equipment (run capacitor)ZP-23 modelZP-26 modelZP-32 modelZP-41 ZP-41

72.0072.0080.3090.10

MF 19 665MF 19 666MF 19 668MF 19 669

• 240 V crankcase resistanceZP-23/83 (70 W) modelZP-90/182 (90 W) modelZP-235 (120 W) modelZP-295/ 385 (150 W) model

71.5079.10

117.00127.00



ROTARY COMPRESSORS FOR AIR CONDITIONINGCode Brand Model Gas Kcal/h €

CL 98 662 Gree QXA- B102uC130 R410A 2,500 202.00

CL 98 663 Gree QXA- B120C150 R410A 3,000 216.00

CL 96 990 Highly ASL145SV-C7LU R410A 3,000 280.00

CL 98 665 Highly ASH232SV-C8LU R410A 6,000 283.00

CL 96 002 Hitachi SG 433 EB2 R22 2,000 174.00

CL 93 505 Hitachi CG633PB-C R407C 2,500 151.00

CL 99 171 LG NK134PAA R410A 2,000 193.00

CL 99 173 LG QK134PAD R410A 2,500 271.00

CL 91 003 Matsushita Electric 2RS126D3AD01 R22 2,000 195.00

CL 92 021 Matsushita Electric 4PS132E R407C 2,000 162.00

CL 96 011 Matsushita Electric 2P14S225ANC R22 2,000 177.00

CL 91 001 Matsushita Electric 2PS154D2DF01 R22 2,500 147.00

CL 91 008 Matsushita Electric 2PS154G5AA01 R22 2,500 226.00

CL 96 012 Matsushita Electric 2P17C225CNB R22 2,500 195.00

CL 92 023 Matsushita Electric 4KS225E R410A 3,000 226.00

CL 91 006 Matsushita Electric 2KS282D3AC01 R22 4,500 289.00

CL 98 623 Mitsubishi KNB092FHBMC R410A 3,000 182.00

CL 98 670 Mitsubishi RN135VHEMC R410A 3,000 205.00

CL 92 351 Mitsubishi TNB220FLBM1 R410A 7,500 617.00

CL 92 352 Mitsubishi TNB306FPGM R410A 9,000 1,001.00

CL 98 916 Quangdong DA89X1C -20EZ R410A 3,000 425.00

CL 96 317 Rechi Precision 39A173A R410A 2,000 158.00

CL 91 013 Rechi Precision 48R273A R22 2,500 174.00

CL 93 506 Samsung F8D129JU1JL R407C 3,000 151.00

CL 96 018 Sanyo C-1RN70H5A R407C 2,000 308.00

CL 96 034 Sanyo C-7RB267H03A R407C 2,500 408.00

CL 96 006 Sanyo C-RV232BH1A R22 3,000 245.00

CL 96 028 Sanyo C-RN80HC R407C 3,000 298.00

CL 99 174 Sanyo C-R95H5K R410A 3,000 389.00

CL 91 011 SIAM Corporation NH44VNDT R22 6,000 452.00

CL 94 014 TECO Electric KETC176ELBC-A R407C 3,000 186.00

CL 98 909 Toshiba PA103M1C- 4DZD R410A 2,000 251.00

CL 92 600 Toshiba DA89X1C -23FZ R407C 3,000 189.00

CL 93 509 Toshiba PG215x2C-4FT R407C 3,000 200.00

CL 93 512 Toshiba PA150x2C-4FT R410A 3,000 200.00

CL 92 852 Toshiba PA108X1C- 4FTDE R410A 4,500 333.00

CL 92 991 Toshiba PA290X3CS R410A 6,000 356.00

CL 92 022 Xian Qingan YZG – 27RY1T1 R22 2,500 121.00



91

MOTORS FOR OUTDOOR UNIT FANS

Code Item Power(W)

Length shaft

(cm) (A)

Size Ø (cm) (C)

€

MOTORS FOR OUTDOOR UNITS

CL 98 261 Outdoor motor (MUP-09-HI HI / WILLZ) 23 6 10 30.00

CL 92 608 YDK24-6G 5 motor wire cables (MUPR MUPR-12-HE) 24 6 14 52.00

CL 93 605 YDK25-6 motor (MUP-09-HE/HA/HG/HF) 25 7 10 28.00

CL 96 287 FW25C motor (MUPR-11N) 25 6.5 16 27.00

CL 98 201 Motor (MUP-12-HI / WILLZ) 30 5 10 34.00

CL 96 271 FW 30 E motor (MUP-12-CN/HN) 36 10 10 48.00

CL 96 278 FW 38A motor (MUP 07x2-09x2C-16 CN) 38 12 12 63.00

CL 91 208 Motor (AUE 500) 40 10 21 84.00

CL 96 272 FW 48 A motor (MUP-16-CN/HN) 48 5.8 16 131.00

CL 96 283 FN50T motor (MUCS-41-HN) 50 11 12 58.00

CL 92 850 Motor (MUCSR-18-HF) 50 7 16 75.00

CL 92 719 YDK53-6H motor (MUC/MUCS/MUST-24-HF) 53 6.5 18 91.00

CL 92 607 YDK53-6M motor (MUPR-18HE2/27HE3) 53 9 18 105.00

CL 92 746 YDK53-6K motor (MUC-18-HF) 53 8.5 19 87.00

CL 96 284 FW60D motor (MUCS-18/24-CN) 60 7.5 11 63.00

CL 96 274 LW 60 B motor (MUP-24/18/12x2-CN/HN) 60 7.3 12 67.00

CL 96 297 FW60S/68T motor (MUCS-24-HN, MUC-24-HNC) 60 7.5 12 47.00

CL 96 279 FW 60J motor (MUP-07x2H-09x2H) 60 7 12 63.00

CL 98 626 Motor (MUPR-18/24-HG) 60 10.5 16 49.00

CL 96 296 FW60B motor (MUCS-18-HN) 60 7 17 44.00

CL 96 289 FW60K motor (MUPR-09x3/07x4-HN) 60 8 16 55.00

CL 96 288 FW60R motor (MUPR-09x2-HN) 60 9 17 47.00

CL 98 908 Motor (MUC-18-HF2, FW-4500, SEI-4500) 60 10.5 16 62.00

CL 92 721 YDK65-6F motor (MUC/MUCS/MUST-48/60-HF) 65 8 19 126.00

CL 97 260 Motor (MUC/MUST-18/24-CN/HN) 66 6.5 16 53.00

CL 93 607 YDK68-6A motor (MUP-18/24-HE/HA/HG/HF) 68 7 15 51.00

CL 96 908 Motor (MUCS-41-H) 68 7 12 63.00

CL 96 273 LW 80 D motor (MUP-18/21/9x2-CN/HN) 68 9 12 57.00

CL 96 292 LW68A motor (MUC-34/41-HNC) 68 7.3 11.8 68.00

CL 97 277 B1-1/8-2F motor (MUC-18/24/44/60) 74 7.5 16 66.00

CL 98 235 Motor (MUP-18-HJ, MUP-18/24-HJ) 75 8 15.5 59.00

CL 96 293 LW92A motor (MUCO-55-HN) 92 6.5 17 86.00

CL 92 777 YDK100-6A motor (MUCR-48-HF) 100 8 19 140.00

CL 97 276 Motor (MUC-30/36) 103 5.5 19.5 66.00

CL 92 720 YDK250-6D motor (MUC/MUCS-30/36-HF) 200 8 14 170.00

CL 91 227 Motor (AUE 253) 280 4.5 14 65.00



MOTORS FOR OUTDOOR UNIT FANS

Code Item Power(W)

Length shaft

(cm) (A)

Size Ø (cm) (C)

€

MOTORS FOR OUTDOOR UNITS

CL 96 260 FN 8 E-PG motor (MUP-07/09/12) 8 4 9 51.00

CL 98 658 Motor (MUP-09/12-HK / MUP-09-HG) 10 5 9 24.00

CL 96 258 FN10E motor (MUPR-11N) 10 4 11 34.00

CL 96 294 FN11T motor (MUCS-18-CN/HN) 11 4.8 14 48.00

CL 93 651 YYK13-4 motor (MUP-09-HE/HA/HG/HF) 13 2.5 9 37.00

CL 92 604 RPG13H motor (MUPR-07/09-HEM, MUPR-09-H3) 13 3 11 77.00

CL 96 256 FN14D motor (MUPR-07x4/09x2/09x3-HN) 14 3 9 29.00

CL 98 213 Motor (MUP-12-HI/HJ) 19 3 9 20.00

CL 93 652 YYK19-4 motor (MUP-12-HE/HA/HG/HF) 19 2.5 9 28.00

CL 98 264 Motor (MUP-09/12-HI) 19 3 9 25.00

CL 93 653 YYS20-4-5A motor (MUP-18-HE/HA/HG/HF) 20 8 10 51.00

CL 98 660 Motor (MUPR-12-HG, FW-INV-3000, MUP-WF) 20 5 9 21.00

CL 98 659 FN20V-PG motor (MUP-18/24-HK / MUPR-18-HG) 20 5 9 35.00

CL 96 259 Motor (MUR-12) 20 3.1 9.2 38.00

CL 98 904 Motor (MUPR-12-H3) 20 4 10.5 53.00

CL 96 261 FN 20 F-PG motor (MUP-16) 20 4 11 51.00

CL 98 238 Motor (MUP-18-HJ) 25 3 9 34.00

CL 93 654 YYS30-4-7B motor (MUP-24-HE/HA/HG/HF) 30 8.3 9.5 51.00

CL 96 282 FN35D motor (MUCS-24/15W/25W) 35 8 12 51.00

CL 96 263 FN 25 D motor (MUP-24) 35 7 9.5 45.00

CL 98 661 Motor (MUPR-24-HG, FW-INV 6000) 35 4.5 11 34.00

CL 99 061 Motor 4 P 2 V 82-2502 (MU-SINGLE) 35 2 9.5 55.00

CL 98 255 Motor (MUP-24-HI) 40 9 10 37.00

CL 92 718 YDK56-6 motor (MUCS-30/36/48-HF) 50 8.5 18 99.00

CL 96 250 FG75B motor (MUC-24/41-HNC) 75 19 11.4 81.00

CL 92 862 Motor (MUCSR-24-HF) 80 4.5 17 97.00

CL 92 716 YSK80-4A motor (MUST-30/36-HF) 80 18 13 111.00

CL 92 863 Motor (MUCSR-30/36/48-HF) 90 9 18 104.00

CL 97 278 806255JVA-A13S motor (MUC-30/36) 103 6 20 66.00

CL 92 393 YKSS-180-4-201 motor(MUC-48/60-HF2, MUCR-48/60-HF2)

180 17 15.5 140.00

CL 97 627 Motor (MUCO-70-HG) 200 5.5 20 150.00

CL 91 229 Motor (ANE 203) 220 3 10 52.00

CL 91 224 Motor (ANE 322 CM) 230 6 9 70.00

CL 91 228 Motor (ANE 253) 230 3 10 56.00



93

AIR SWING MOTORSCode Description Length

shaft (cm)Size

Ø (cm) €

AIR SWING MOTORS (12 V)

CL 98 215 Swing motor (MUP-09/12/18-HI) 3.5 2.5 5.00

CL 93 676 Swing motor (MUP-09/12-HE/HA/HG/HF) 1 2.5 16.00

CL 93 677 Swing motor (MUP-18/24-HE/HA/HG/HF) 3 9 8.00

CL 91 231 Swing motor (ANE 452-562-322) 0.8 9 17.00

CL 96 267 MP24GA swing motor (MUP-HN) 1 2.5 8.00

CL 98 681 Swing motor (MUP-12 x 2-HG) 1 2.5 5.00

CL 91 230 Swing motor (ANE 203-253) 0.8 2 15.00

CL 92 006 Swing motor window conditioner (MUV CN/HN) 1.3 5 6.00

CL 98 256 Swing motor (MUP-24-HI) 1.5 3.5 7.00

CL 95 200 Swing motor (MUST-14/18/24-HE) 0.9 3.5 5.00

CL 96 268 MP 24 EA swing motor (MUP-18/21) 0.9 2.5 9.00

CL 91 212 Swing motor (ANE 632-712) 2.7 4.3 14.00

CL 97 285 Swing motor (MUST-HN) 0.9 3.5 14.00

CL 92 609 Swing motor (MUPR-12-HE/HEM) 0.8 2.8 6.00

CL 92 765 MP35EA7x1 swing motor (MUST-HF) 1.4 3.5 9.00

CL 92 766 MP35EA81x1 swing motor (MUST-HF) 0.7 3.5 9.00

CL 96 251 Swing motor (MUCO-24/41/55-HN) 0.8 5 8.00

CL 92 751 Swing motor (MUCS-18-HF) 0.9 3.5 6.00

CL 92 511 TYJ50-8 swing motor (MUV-12/18-HE) 1.3 5 9.00

CL 92 752 Swing motor (MUCS-24/30/36/48-HF) 1.3 3.5 12.00

CL 92 963 24BYJ48A01 swing motor (MUCS-HG) (V1) 0.8 2.4 12.00

CL 96 276 Swing motor (MUV-12) 1.5 6.5 6.00

CL 96 277 Swing motor (MUV-18) 1.8 6.5 7.00

CL 91 232 Swing motor 1.2 6 8.00

CL 93 007 Conditioner swing motor (AM 37) 1.2 6.5 6.00

CL 96 275 Swing motor (MUV-07/09) 1.2 6.5 7.00

CL 95 105 Swing motor (MUST-28/36/42/52-HE) 1.5 6.5 6.00

BLADES FOR AXIAL FANSCode Item Diameter

(cm) €

AXIAL FANS

CL 98 260 Axial fan 32.5 44.00

CL 93 753 Axial fan 40 14.00

CL 98 627 Axial fan 40 54.00

CL 96 400 Axial fan 41 14.00

CL 92 851 Axial fan 43 13.00

CL 96 416 Axial fan 45 19.00

CL 92 730 Axial fan 46 30.00

CL 97 635 Axial fan 46 13.00

CL 98 628 Axial fan 51 13.00

CL 92 727 Axial fan 55 37.00

CL 93 753



TANGENTIAL IMPELLERS INDOOR UNITCode Item Length:

cmDiam.

cm €

CL 92 008 Centrifugal fan (MUV-07/09-CN/HN) 9 17.5 14.00

CL 92 102 Plastic turbine (MU ECO-09/12/15) 13.5 12 6.00

CL 92 534 Fan (MUV-09-HE) 17.5 9 10.00

CL 92 776 Centr. fan + casing (MUC-18 HF) 19 24 17.00

CL 92 115 Metallic turbine (MU ECO-09/6R-09/6R3) 35 12 10.00

CL 98 515 Tangential fan (MUR) 42 7.5 27.00

CL 93 705 Tangential impeller (MUP-09/12-HE/HA/HG/HF) 58.5 10 25.00

CL 96 417 Tangential fan (MUPR-07x4/09x2/09x3-HN) 58.5 9.5 12.00

CL 98 962 Tangential fan (WZ-25/32) 58.5 10 12.00

CL 98 219 Tangential turbine (MUP-9/12-HI/HJ) 60 9 10.00

CL 96 409 Tangential fan (MUP-07/09/12/16) 61.5 9 27.00

CL 92 132 Metallic turbine (MU ECO-15/8R/15/8R3) 62.5 12 28.00

CL 96 415 Tangential fan (MUR-12) 65.5 9 24.00

CL 98 259 Tangential turbine (MUP-18-HI) 68 10 12.00

CL 98 239 Tangential turbine (MUP-18-HJ) 68 10 12.00

CL 92 669 Tangential turbine (MUPR-18-HE) 74 11 14.00

CL 98 250 Tangential turbine (MUP-24-HI) 80.5 12 19.00

Code Item Dimensions €

ACCESSORIES

CL 93 725 SILENT BLOCK H: 3 cm - Ø3.4 (cm) 13.00

CL 98 216 UI bearing turbine (MUP-12-HI) Ext. 3.2 cm Int. 6.08mm 6.00

CAPACITORSCode Item €

• Power 450 V

VE 01 901 1 μF mini capacitor 3.00

VE 01 902 1.5 μF mini capacitor 3.00

















CL 93 705

CL 93 725



95

PIPE CUTTING TOOLSShort pliers for capillary pipe

Code Item €

HF 01 001 Mod. 94082 Scissors type with adjusted stop 8.50

Hose cutter

Code Item €

MA 01 031 Hose cutter guillotine type 7.80

Pipe cutter for cooling

Code Item €

MINIATURE PIPE CUTTER

HF 01 301HF 01 010

• In reduced size, ideal for working in areas with a difficult access• For tubes from 1/8" to 5/8" (from 4 to 15 mm)Mod. RR-127 Mod. TC-1050 “Imperial”

7.0027.80

MINI PIPE CUTTER

HF 01 002 Mod. RR-174 for 1/8" to 1-1/8" pipes (from 6 to 8 mm) 12.50

SMALL PIPE CUTTER

HF 01 004 Mod. 227-FA “Imperial” reduced size for1/8" to 3/4" pipes (from 4 to 19 mm) 41.00

PIPE CUTTER WITH REAMER

HF 01 303 Mod. RR-274For tubes from 1/8" to 1-1/8" (from 7 to 28 mm)and reamer 16.00

HF 01 304 Mod. RR-312For pipes from 1/4" to 1-5/8" (from 7 to 41 mm)and reamer 23.00

RESTRICTING PIPE CUTTER

HF 01 008

• Restricts from 1/8" to 1-1/8" (from 3 to 28 mm) with cutting and boarding wheelMod. TC-1020 “Imperial” 71.00

HEAVY DUTY PIPE CUTTER

HF 01 005

HF 01 006

Mod. TC-1000 from 1/8" to 1-1/8" (3 to 28 mm)with spare cutting wheel and “Imperial” reamerMod. 312-FC from 1/4" to 1-5/8" (from 6 to 41 mm)with spare cutting wheel and “Imperial” reamer

44.00

123.00

HIGH CAPACITY PIPE CUTTER

HF 01 003 Mod. 206-FB with retractile reamer from 3/8" to 2-5/8"(from 10 to 66 mm) “Imperial” 123.00

HF 01 310 Mod. RR 206 for pipes from 1/5" to 2-1/2" 36.00

COPPER PIPE CUTTER WITH RATCHET SYSTEM

HF 01 021HF 01 022

Mod. Ratchet from 1/4" to 7/8" (6 to 23 mm)Mod. Ratchet from 5/16" to 1-1/8" (8 to 28 mm)

26.0031.00

SPARE BLADES FOR IMPERIAL PIPE CUTTER

HF 01 101HF 01 102HF 01 104

For models: 127-FB, 227-FA,TC-1050For models: 174-F, 312-FC, TC-1000, TC 1020For models: 206-FB

3.757.00

11.80

94082

Hose cutter

TC-1050

RR-127

RR-174

RR-274

312-FC

206-FB

227-FA

Ratchet



“VALUE” ergonomic pipe cutting tools

Code Item €HF 01 401

HF 01 403

Mod. VTC 28Bfor pipes from 1/8" to 1-1/8" (4 to 28 mm)Mod. VTC 42for pipes from 1/8" to 1-5/8" (6 to 42 mm)

20.50

37.50SPARE BLADES

HF 01 405HF 01 407

For VTC 28B modelFor VTC 42 model

3.504.50

Saw for metals

Code Item €MA 01 101

MA 01 110

Mod. MT 62003Arc saw with polyester handleSet of 5 carbon steel saw blades

8.75

5.90

PVC, PE, PVDF pipe cutting plier

Code Item €MA 01 021 Mod. K-42

PVC pipe cutting plier up to 1-1/2" (42 mm), by zipper drive 8.90

MA 01 022 Mod. KS-63Ø 0-63 mm PVC pipe cutting plier 35.00

PVC cutting scissors

Code Item €MA 01 051

MA 01 055

P-35 (Ø35)With fast back to cut PVC pipes from 6 to 35 mmP-42 (Ø42)With fast back to cut PVC pipes from 25 to 42 mm

23.00

35.00

Electric pipe cutter with battery for copper pipe

Code Item €

MA 15 131

• Milwaukee motor with 500 rpm high capacity• 12 mm copper pipe cutter in less than 3 seconds • REDLINKTM overload protection electronics of the

device and battery• Automatically adjusted jaws to pipe size• Sealing materials• Resistant front end to corrosion• Soft grip with ergonomic design• Charging indicator (LED light)• Valid for copper sanitary (Ø12, 15, 18, 22 and 28 mm)

and cooling copper (Ø7/8", 1" and 1-1/8")• Battery and charger includedC12 PC 342.00

Cutters

Code Item €MA 01 121MA 01 129

Broad blade cutter with protective metalSpare blades (10 broad blade pack)

2.853.25

Scissors

Code Item €SCISSORS FOR ELECTRICIAN

MA 01 301MA 01 302

• 5 1/2" length (140 mm)• Insulating acetate handleMod. 562Mod. 564 (micro-serrated)

12.9018.55

SEALED gear HighCAPACITY

VTC 42

K-42

KS-63

P-42P-35



97

FLARING TOOLSCode Item €

BEAT UP FLARING TOOL

HF 02 031 Mod. RR-193 Beat up flaring punches.Case containing four expanders for 1/4", 3/8", 1/2"and 5/8" 10.00

BEAT UP FLARING TOOL

HF 02 035 Mod. RR-94 Punch for 1/2", 5/8" and 7/8" 8.80

45° FLARING TOOL

HF 02 061 Mod. RR-525 UniversalFlaring tool for pipes from 3/16" to 5/8" 43.00

SOFT FLARING TOOL

HF 02 081 Mod. RR-808AThe special eccentric cone revolution allowsthe internal opening of the pipe without any effort, obtaining an accurate and regular flaring work.Suitable for pipes from 1/4" to 3/4" 124.00

FLARING TOOL WITH CONES

HF 02 021 Mod. RR-500 It guarantees the maintenance of thickness through rotational methods on pipe in any flaring work from 3/16" to 5/8" 48.00

HF 02 063 Mod. RR-N195 It guarantees the maintenance of thickness through rotational methods on pipe in any flaring work from 3/16" to 3/4" 78.00

PAWL FLARING TOOL

HF 02 069 Mod. RR-810A“Pawl” asymmetric handle easy to use. Suitable for pipes from 3/16" to 3/4" 104.00

FLARING AND EXPANDER TOOLS

HF 02 065 Mod. RR-N276Flaring and expander tools for tubes from 3/16" to 3/4"

125.00

COMBINATION OF FLARING AND 45° EXPANDER TOOLS

HF 02 068 Mod. RR-275Flaring and expander tools for pipes from 1/8" to 3/4" 70.00

FLARING AND CUTTING TOOL CASE

HF 02 071 Mod. RR-1226L• Flaring tool for pipes from 3/16" to 5/8" with two pinch

off pliers.• RR-274 pipe cutter (1/8" to 1-1/8") 69.00

“SUPER” COMPLETE CASE

HF 02 073 Mod. RR-278L• Flaring and expander tools for pipes from 1/8" to 3/4"

with two pinch off pliers• RR-274 pipe cutter (1/8" to 1-1/8")• RR-122 ratchet wrench 95.00

“BASIC” COMPLETE CASE

HF 02 075 Mod. RR-121• Flaring tool for pipes from 1/8" to 3/4"

with two pinch off pliers• 1/4", 3/8" and 1/2" spring kit • RR-274 pipe cutter (1/8" to 1-1/8")• RR-122 ratchet wrench 88.00

RR-94

RR-808A

RR-N195

RR-525

RR-500

RR-N276

RR-1226L

RR-278L

RR-121

RR-275

RR-193

RR-810A



FLARING TOOLSCode Item €

FLARING TOOLHF 02 001 Mod. 525-F for pipes from 3/16" to 5/8" 109.00

FLARING AND EXPANDER TOOL CASEHF 02 011 Mod. 275-FS Flaring and expander tools for pipes

from 1/8" to 3/4" 178.00FLARING AND EXPANDER TOOLS WITH PIPE CUTTER CASE

HF 02 012 Mod. 275-FSC Set equipped with flaring tooland 275-FS expander from 1/8" to 3/4" andTC-1000 pipe cutter from 1/8" to 1-1/8" 232.00

FLARING TOOL WITH TWO PINCH OFF PLIERSHF 02 013 Mod. 375-FS Set equipped with two pinch off pliers

and a single bridge, supplied in a case.For pipes from 1/8" to 3/4" 214.00

ECCENTRIC ELECTRIC FLARING TOOLCode Item €

• Eccentric electric conical flaring tool• The copper clamped tube is fixed through a limit that

suppresses irregularities in the area flared by the tube.• The eccentric cone progresses with a rotary movement

to push and gradually extend the inner diameter of the copper pipe

• Weight with battery: 1,710 kg• Dimensions with battery: 122 x 67.5 x 274 mm• Battery loading time: 60 min• Power charge: 220 V (50/60 Hz)• Power: 60 VA• Minimum distance from the wall: 45 mm• Includes: Battery charger, 5 clamps set (1/4" - 3/8" - 1/2"

- 5/8" - 3/4"), case to protect from impacts, pipe cutters, spare battery

HF 02 301 Mod. RF 20N 440.00

FLARING TOOLS FOR DRILLCode Item €

HF 02 320 Flaring tool kit(1/4", 1/4"-3/8", 1/4"-1/2", 3/8"-5/8") 100.00

EXPANDER TOOLCode Item €

MANUAL EXPANDERHF 02 110 Mod. VTS 22

Dimensions: 3/8" - 1/2" - 5/8" - 3/4" - 7/8" 45.00

PUNCH TYPE SWAGING TOOLSCode Item €

HF 02 076 Set of 5 punches for 1/4"; 5/16"; 3/8"; 1/2" and 5/8".Also includes a flaring bar. 63.00

1/4"barely

275-FSC 275-FS

525-F



99

REAMERSCode Item €

HF 02 201HF 02 202

• One single piece wheel for inner flange, both inside and outside edges of copper tubes from Ø 3 mm. inner Ø to 40 mm. 1/8" to 1-1/2"Mod. RR-208 Plastic bodyMod. RR-209 Metallic body

8.2514.00

HIGH CAPACITY

HF 02 220HF 02 221

• Aluminium body, steel bladesMod. RR 210 from 3/16" to 1-3/8"Mod. RR 211 from 5/16" to 2-1/8"

26.5040.00

GREAT CAPACITY WITH ELECTRIC DRIVE

HF 02 223

• Cylinder to rearm outside and inside of copper, brass, steel and plastic pipes, Ø10 to 54 mm 1/2" to 2-1/8"

Mod. REG 10-54E for electric screwdrivers (revolutions ≤ 300/minute) 206.00

POCKET REAMERSCode Item €

HF 02 211HF 02 213

Mod. RT-100 Plastic handle and steel reamerRT100 spare steel reamer

12.504.40

HF 02 212 Mod. RT-300 Plastic handle with pen-typesubjection and carbon steel reamers, which cannotbe replaced 7.50

EXPANDING AND SWAGING TOOLSCode Item €

EXPANDING TOOL CASE FOR COOLING

HF 02 102 Mod. RR-100• 1 Expanding plier RR-100H• 6 Expanding heads: 3/8", 1/2", 5/8", 3/4",7/8" and 1" • 1 Reamer RR-208 300.00

HYDRAULIC EXPANDING AND SWAGING TOOLSCode Item €

EXPANDING TOOL CASE FOR COOLING

HF 02 105 Mod. BT300• 1 Hydraulic expanding pliers• 7 Heads: 3/8"; 1/2"; 5/8"; 3/4"; 7/8"; 1" and 1-1/8"• 1/4" to 1-5/8" pipe cutter• 3/16" to 1-1/2" metallic reamer• Case 345.00

ACCESSORIES

HF 02 112 Expander head 1 3/8" 130.00

HF 02 113 Expander head 1 5/8" 130.00

RR-100



PIPE BENDING TOOLSCooling pipe benders

Code Item €

MULTIPLE PIPE BENDER

HF 03 211 Mod. RR-368 for copper pipes; it allows to make bends of 90° in pipes of 1/4"; 5/16" and 3/8" 22.00

HF 03 212 Mod. RR-368 of 180°. Identical to the former model butit allows to make bends of up to 180° 30.00

HF 03 215 Mod. RR-369 for copper pipes; it allows to make bends of 90° in pipes of 1/4"; 3/8" and 5/8" 54.50

PIPE BENDER

HF 03 201HF 03 203HF 03 204HF 03 205HF 03 206HF 03 207

RR 364-04 1/4"RR 364-06 3/8"RR 364-08 1/2"RR 364-10 5/8"RR 364-12 3/4"RR 364-22 7/8"

25.0030.0035.0050.0060.0075.00

Spring type tube bending tools

Code Item €

HF 03 041HF 03 047HF 03 048HF 03 049HF 03 050HF 03 051HF 03 052

Spring kit for copper pipes of 3/8"; 1/2"; 5/8"“Loose” spring 1/4"“Loose” spring 3/8"“Loose” spring 1/2"“Loose” spring 5/8"“Loose” spring 3/4"“Loose” spring 7/8"

8.501.752.253.153.754.505.75

Pipe benders

Code Item €

MULTIPLE PIPE BENDER

HF 03 001 Mod. 368-FH for copper pipes; it allows to make bends of 90° in pipes of 1/4"; 5/16" and 3/8" 55.00

“SPECIAL SPLITS” PIPE BENDER

HF 03 002 Mod. 370-FH for copper pipesspecial for 1/4", 3/8" and 1/2" splits 112.00

364-FH TUBE BENDER 364-FH

HF 03 011HF 03 012HF 03 013HF 03 014

To bend annealed copper pipes, it allows to make bends of 90° and 180°:Mod. 364-FH 3/8"Mod. 364-FH 1/2"Mod. 364-FH 5/8"Mod. 364-FH 3/4"

142.00164.00217.00338.00

Lineset bender for insulated pipes “Easybend”

Code Item €

HF 03 021 •For the following dimensions 1/4", 3/8", 1/2", 5/8"• Length 4 meters• Four colors 65.00

RR-368

RR-364

RR-368180°

Easybend

TWISTEDOUTDOOR



101

PIPE BENDING TOOLSHydraulic tube bender with battery

Code Item €

Case with pipe bending tools, 5 forms and 4 counterforms• Weight with battery: 2.9 kg• 12 V 2 A battery• 230 V battery charger• Battery charges in 50 minutes

HF 03 361 OB85/SBForms: 3/8", 1/2", 5/8", 3/4" and 7/8"Counterforms: 14, 17, 18 and 22 938.00

Portable pipe bender for multiple diameters

Code Item €

Case with pipe bending tools, 7 forms and 3 counterforms• Capacity:

Annealed copper pipe up to Ø22 and 1.5 mmCoated copper pipe up to Ø18 and 1 mmCoated aluminium pipe up to Ø26 and 3 mm

• Total weight: 5 kg

HF 03 301 P 22 A (COOLING pipe)Forms: 1/4", 5/6", 3/8", 1/2", 5/8", 3/4" and 7/8"Counterforms: 1/4" to 3/8", 3/8" to 5/8" and 3/4" to 7/8" 356.00

MA 03 211 P 22 A (WATER pipe)Forms: 10, 12, 14, 16, 18, 20 and 22Counterforms: 10 to 12, 14 to 17 and 18 to 22 356.00

Hydraulic pipe bending and flaring tools

Code Item €

Case with hydraulic tube bender, 7 formsand 3 counterforms• Capacity:

Annealed copper pipe up to Ø22 and 1.5 mmCoated copper pipe up to Ø18 and 1 mmCoated aluminium pipe up to Ø32 and 3 mm

• Flaring tool system with 7 flaring punches• Total weight: 11 kg

HF 03 305 OB/KIT (COOLING pipe)Forms: 1/4", 5/6", 3/8", 1/2", 5/8", 3/4" and 7/8"Counterforms: 1/4" to 3/8", 3/8" to 5/8" and 3/4" to 7/8"Flaring punch: 1/4", 5/6", 3/8", 1/2", 5/8", 3/4" and 7/8" 1,085.00

MA 03 215 OB/KIT (WATER pipe)Forms: 10, 12, 14, 16, 18, 20 and 22Counterforms: 10 to 12, 14 to 17 and 18 to 22Flaring punch: 10, 12, 14, 16, 18, 20 and 22 1,085.00

Portable tube bender, tube cutter and reamer

Code Item €

HF 03 311 Mod. RR-707I (COOLING tube)Complete set of:• Rack type pipe bender

Forms: 3/8", 1/2", 5/8", 3/4" and 7/8"Counterforms: 3/8" to 1/2" and 5/8", 3/4", 7/8"

• Metallic reamer• Pipe cutter from 1/8" to 1-1/8" (4 to 28 mm) 160.00

MA 03 221 Mod. RR-909M (WATER pipe)Complete set of:• Rack type pipe bender

Forms: 8, 10, 12, 15, 16, 18 and 22Counterforms: 8, 10, 12, 15, 16, 18 and 22

• Metallic reamer• Pipe cutter from 4 to 28 mm 160.00RR-909M



ELECTRIC PIPE BENDERCode Item €

ELECTRIC PIPE BENDER

HF 03 341 Mod. RECORD 32 (COOLING pipe)Plastic case with:• Record 32 electric pipe bender of 750 W• 3/8" - 1/2" - 5/8" - 3/4" - 7/8" moulds• It allows bending copper, multilayer and sweet steel pipes 500.00

SERVICE TOOLSCode Item €

BELZER RATCHET SPANNER

HF 04 101 Mod. R-6950-Mreverse on an end with double square, 1/4" and 5/16"with spring for a change of turn direction of the spanner.Three fixed squares of 5/16", 3/8" and 1/2" 136.00

RATCHET SPANNER SERVICE VALVES

HF 04 105 Mod. RR-122With turn direction reversing device on both endswith squares for 3/16",1/4", 5/16" and 3/8" 6.50

HF 04 103

HF 04 104

HF 04 106

Mod. RR-123 LWith turn direction reversing device on both ends, with squares for 3/16" and 1/4" and hexagonal for 1/2" and 5/16"Mod. 124CThe same model as RR-123 L but “Imperial” trademarkMod. 127CWith turn direction reversing device on both ends, with squares for 3/16",1/4", 5/16" and 3/8" “Imperial” trademark

10.00

58.00

23.00

DOUBLE ENDED SPANNER SET

HF 04 111 • Chrome - vanadium• DIN 3110 chromed head• 8 pieces 6 - 7 to 20 - 22 24.00

STAR SPANNER SET

HF 04 121 • Chrome - vanadium• Chromed head• DIN 838 elbowed• 8 pieces 6 - 7 to 20 - 22 29.85

ALLEN SPANNER SET

HF 04 131 • Forged steel• DIN 3110 chromed head• 8 pieces 2 - 3 - 4 - 5 - 6 - 7 - 8 - 10 3.10

PIPE SPANNER SET

HF 04 141 • Forged steel• 2 DIN 896 outlets• 8 pieces 6 - 7 to 20 - 22 117.00

SOCKET SPANNER SET AND BITS

HF 04 152 • 22 Sockets-Bit 1/4"• 13 socket spanners 1/4": 4 - 4.5 - 5.5 - 6 - 7 - 8 - 9 - 10 -

11 - 12 - 13 - 14 mm (5/32" - 9/16")• 2 Extensions 1/4", 50 - 10 mm• 1 Spanner 1/4"• 1 Rotating handle• 1 Universal articulation 1/4"• 1 Sliding bar 1/4"• 3 Hexagonal spanners (ALLEN)• 1 Flexible extension• 1 Case 73.25



103

Spanners

Code Item €

ADJUSTABLE SPANNERS

HF 04 161HF 04 162HF 04 163HF 04 164HF 04 165HF 04 166

• Forged steel• DIN 31176" size8" size10" size12" size15" size18" size

6.858.70

11.7215.4030.8045.10

STILLSON SPANNERS

MA 04 182MA 04 183MA 04 184MA 04 185MA 04 186

10" Stillson spanner12" Stillson spanner14" Stillson spanner18" Stillson spanner24" Stillson spanner

11.8012.0013.9024.8247.20

Torque wrenches set

Code Item €

R410A COMPLETE CASE

HF 04 110 Supplied with torque wrench with exchangeable heads for 17-22-24-26-27 and 29 mm diameters 72.00

Pliers

Code Item €

PLIERS TO PRESS COPPER PIPE

HF 04 001 Mod. VISEGRIP - RR «ORIGINAL» 58.73

HF 04 002 Mod. MT00322• With forged pinch off tool• GRIP 10" size 9.50

UNIVERSAL PLIERS

HF 04 005HF 04 007

• Chromed head• Acetate handle6" size8" size

6.358.90

DIAGONAL SIDE CUTTING PLIERS

HF 04 012

• Chromed head• Acetate handle160 mm size 11.85

CRIMPER PLIERS

HF 04 015• Pliers for the shutting of crimperMod. SUPER 7.25

STRIPER PLIERS

HF 04 016 • For 0.5 to 6 mm cables• With cutter 11.85

WATER PUMP PLIER WITH RACK

HF 04 026

• Chromed head• Acetate handle240 mm size 19.10

Pliers for gas circuit

Code Item €

TUBE PIERCING PLIERS

HF 04 035 Ref. AV 7 Tube piercing pliers for loading or unloading the system, 7/16 UNF (1/4" SAE) 58.00



Pliers and pincers

Code Item €

COMBINATION PLIERS

MA 15 105

• Combination pliers to hold flat and round material, prepared for bending, deburring, cutting and stripping cables, and also fitting ends.

• Wire stripping holes: 0.75 to 1.5 mmand 2.5 mm

• Indentation to fit tips from 0.5 to 2.5 mm• Wire cutter with precision edges

(induction hardened) for Cu and Al cables until 5 x 2.5 mm/Ø 15 mm

• With automatic spring opening: Intelligent closing mechanism to work without fully opening the pliers.The edge remains closed and protected

Combination pliers 90.00

PLIERS WRENCHES

MA 15 115MA 15 116

• Replaces the need for wrenches sets of metric and imperial spanners

• also excellent for gripping, holding, pressing and bending workpieces

• Smooth jaws for free damage installation ofhigh quality plated fittings, red cast iron, stainlesssteel or chromed materials

• The ratchet type principle allows quick and easy tightening and release

• Automatic setting by pushing the button directly on the workpiece

180 length pliers- wrench250 length pliers-wrench

82.5098.00

COBRA WATER PUMP PLIER MODEL

MA 15 111

KNIPEX Cobra Hightech Water Pump Pliers• Automatic setting by pushing the button directly

on the piece• Self-locking on pipes and nuts, with perfect grip

on the piece with low handforce required• Gripping surfaces with special hardened teeth,

teeth hardness approx. 61 HRC: high wear resistanceand stable gripping

• Reliable catching of the hinge bolt: it cannot be unintentionally maladjusted

• Chrome-vanadium electric, forged andoil-hardened steel

KNIPEX COBRA 40.00

QUALITYMade in

Germany

QUALITYMade in

Germany

QUALITYMade in

Germany

Electricalresistance

Cutting capacity

mmØ mm mm²

1000v 15 50 200

Code Settingpositions Inches mm mm

MA 15 115 13 1-3/8" 35 180

MA 15 116 17 1-3/4" 46 250

Code Settingpositions Inches Inches mm mm

MA 15 111 25 2 50 46 250



105

SERVICE TOOLSCode Item €

ALLEN SPANNER SET

MA 15 125

• High quality hardened steel• Lifetime warranty• Long-range handle• Hexagonal head pivot. Allows users to insert it

in the screw head just once and turn it around obstacles

HEX PRO 86.00

2 IN 1 WRENCH WITH RATCHET FUNCTION

MA 15 120

MA 15 121

• Made of cast steel alloy• Advantages: speed and possibility to work

in confined spaces• Lock button for using as conventional

wrench

8" wrench (200 mm)

10" wrench (250 mm)

42.00

50.00

MULTIFUNCTIONAL WRENCH:10 sides + 2 crosses + 1 wrench

MA 15 101

For all step systems and standard sizes• Multifunctional wrench for step systems in the

construction engineering (heating and pumping,air conditioning and ventilation technique, electronic), gas and water supply and locking systems

• 8 sides version: 2 cruciform wrenches combined through a magnetic order to save space

• Reversible tip: groove of 1.0 x 7 mmand PH2 cruciform

• Reversible wrench and bit united with a durable end braided stainless cable

• Zinc smelting design with optimized weight

KNIPEX TWINKEY 46.00

JOBSITE BACKPACK

Strong:• Made with ballistic nylon of 1680 deniers. Resistance

and quality• Hard moulded base to hold the bag

in upright position and waterproof to protectfrom inclement conditions

Large hinged front:• Large storage, 35 pockets in total.• Fold down strong pocket for easier access and storage

of larger items• Side water bottle pocketBreathable and padded straps:• Added comfortVertical tool wall• Maximizes storage space while allowing for bulk

storage spaceLaptop pocket:• Protected pocket for laptops, tablets, etc.Additional outer hooks:• Allows to carry other tools

MA 15 130 HEAVY DUTY backpack 155.00

Ø mm Ø mm Ø mm Ø mm mm mm

5 / 6-7 / 8-9 / 10-11 7-8 / 9-10 / 11-12 3-5 6 6-9 95

QUALITYMade in

Germany

Simple, efficient and patented

design

OPENCLICK

Laptoppocket

Rigid waterproof

base

Pocketwith folding

cover



Belt with tool holder bag

Code Item €HF 04 415 Simple tool holder bag. Ref. MT 26120

Includes the belt 15.00HF 04 409 Double tool holder bag. Ref. MT 26240

Includes the belt 23.50

Tool case

Code Item €ALUMINIUM

HF 04 401

HF 04 402

• 457 x 330 x 152 dimensions• Includes a banderole for hanging• Compartment with adjustable divisions• Tool holder plateMod. ALUMINIUM• Weight: 3.9 kg PVC/ALUMINIUM model• Weight: 3.3 kg

42.75

50.50PLASTIC

HF 04 403HF 04 404HF 04 405HF 04 406HF 04 408HF 04 407HF 04 411HF 04 417

• For protection and transport of control elementsand tools

Mod. 170/30 (320 x 290 x 114 blue)Mod. 170/30 (320 x 290 x 114 red)Mod. 170/38 (390 x 295 x 95 blue)Mod. 170/42 (423 x 315 x 110 blue)Mod. 170/42 (423 x 315 x 110 red)Mod. 170/51 (510 x 400 x 130 blue)Mod. 170/36 (365 x 255 x 72 black)Mod. 170/48 (325 x 460 x 120 black)

11.0011.0012.5019.0020.0027.5012.0035.00

VERTICAL CASE

HF 04 431

• Vertical opening• Dimensions: 420 x 280 x 190 mm• Double side trays for tools• Black colorMod. VGA 6201 150.00

SUPER tool holder case

Code Item €

HF 04 434HF 04 435

• Polypropylene briefcase• Internal dimensions: 325 x 460 x 170 mmMod. 170/48 H184 with foamMod. 170/48 H184 PU complete with:• Tray for documents• 2 tool holder trays• Trays for small materials

46.50

206.00

Tool case with trolley

Code Item €HF 04 419 • 455 x 340 x 185 mm case

Includes separator of 2 trays and folding trolleyfor transport 150.00

170/48 H184 PU

INSTALL

YOUR CASE

TAILOR-MADE!



107

Tool metal case

Code Item €

HF 04 438

HF 04 439

• Blue painted plate• Round handle3 C model (3 compartments) Dimensions: 400 x 200 x 160 mm5 C model (5 compartments) Dimensions: 430 x 200 x 210 mm

43.90

51.60

Case for vacuum pump and tools

Code Item €

HF 04 428 Mod. 159 BLU• 338 x 287 x 515 polypropylene case

with mobile tray• Blue color with handle and clasps 50.00

Fin comb

Code Item €

«RR-351» FIN COMB

HF 04 201

• Steps of 8, 9, 10, 12, 14 and 15 fins/inch• Steps of 3.16, 2.82, 2.54, 2.12, 1.81 and 1.7 mm6 fin combs 10.75

«RR-352» UNIVERSAL FIN COMB

HF 04 211 • Spring-steel threads• Suitable to all the steps 9.00

Screwdrivers

Code Item €

7 PIECES SCREWDRIVER SET

HF 04 229• Insulation: 1000 V4 flat nib screwdrivers of 3, 4, 5.5 and 6.52 crossed nib screwdrivers PH1 and PH21 pole searcher 48.50

KIT BOLI-BIT

HF 04 226 Pen type screwdriver with 4 tips: 2 flat (3 and 4 mm) and 2 crossed 2.00

POLE SEACHER SCREWDRIVER

HF 04 251HF 04 252

Pole searcher length 60 mmPole searcher length 100 mm

2.603.60

“PROMO” 10 PIECES SCREWDRIVER SET

HF 04 230 10 screwdrivercase: 3-75, 5-75, 6-100, 8-150 0-75, 1-75, 2-100, 3-150 Bodybuilder 6-40 Bodybuilder 2-40

29.00

Complete basic case

Code Item €

HF 04 171 MT46124 case• Includes 124 pieces: hammer, wrench, screwdrivers,

pliers, cutter, scissors, level, etc. 72.00



CLEANING EQUIPMENTS FOR COOLING CIRCUITS«NITROGEN» cleaning equipment

Code Item €No.1 CLEANING MODEL

HF 05 010 Two-wheeled trolley with support handle and:• 7 liters nitrogen bottle (200 bar/1.4 m³)• 3 meters hose with couplings• Complete regulator with gauges, 200 kg inlet

and 6 bar outlet 615.00No.2 TIGHTNESS MODEL

HF 05 009 Two-wheeled trolley with support handle and:• 7 liters nitrogen bottle (200 bar/1.4 m³)• 3 meters hose with armored couplings• Complete regulator with gauges, 200 kg inlet

and 45 bar outlet 745.00TIGHTNESS TEST KIT FOR STANDARD BOTTLES

HF 05 050HF 05 044

Includes:• 1/4" SAE nitrogen regulator• Includes installation test kit• 1/4" SAE 2.5 meters flexible tube• 5/16" SAE-f x 1/4" SAE-male adapter for R410A

installation connexion• Plastic briefcaseOutlet accuracy: 0.5 ± 50 barOutlet accuracy: 0.5 ± 70 bar

390.00295.00

TEST AND PRESSURE LEAK KITHF 05 052 Includes:

• 1 kg disposable nitrogen bottle (100 L/110 bar)• 220/50 bar pressure regulator• 1/4" connections• Adapter of 5/16" H to 1/4" M SAE• Bottle adapter• External safety bottle• Ø80 type 1 manometer 350.00

ACCESSORIESHF 05 015HF 05 025HF 05 040HF 05 041HF 05 042HF 05 043HF 07 290HF 05 018HF 05 019HF 05 016HF 05 031

HF 05 026

HF 05 027

HF 05 014

15 bar pressure regulator (6 bar cleaning)50 bar pressure regulator (tightness)40 bar pressure regulator (tightness)55 bar pressure regulator (tightness) “HARRIS”60 bar pressure regulator (tightness)70 bar pressure regulator (tightness)Ø50 mm manometer rubber protectionØ13 Harris regulator joint bottle/regulator couplingØ12 Harris regulator joint bottle/regulator coupling5 m hose with coupling adapter3 m hose with armored coupling adapter(tightness) for Harris regulator and 6 bar cleaning3 m armored hose with gate valvefor 45 bar regulator3 m hose with SAE 1/4" couplingfor 55 bar HARRIS regulatorTrolley with spare wheels

103.00232.00250.00238.00288.00215.00

8.704.002.00

45.00

39.00

67.00

43.0070.00

BOTTLESHF 05 011HF 05 013

7 liters nitrogen bottle (200 bar/1.4 m³)11 liters “Rollerflam” nitrogen bottle (200 bar/2.1 m³)

485.00718.00

“ALBEE” COMPLETE BOTTLES

HF 05 012• 0 to 50 bar pressure reducer with included manometer11 liters “Rollerflam Minitop” Albee Cool bottle 718.00

BOTTLE LOADINGHF 05 021HF 05 029HF 05 023

7 liters loading (200 bar/1.4 m³)11 liters “Albee” loading (200 bar/2.1 m³)11 liters “Rollerflam” loading (200 bar/2.1 m³)Note: The bottle must be bought by the user and loadings

will be made in exchange for the bottle.

73.0085.0085.00

LIM-NO1

15 kgregulator

HF 05 043

HF 07 290

Nitrogenbottle

Albee Nitrogen spare

RefrigerantPS system minimum

(bar)

P. waterproof test (bar)

R-410 40 38/42

R-407 29 26.1/29

R-404 30 28/32

R-134 19 18/22

According to RD 138/2011 and C+38 °C < 43 °C climate zone

with your b

ottle

To work

NITROGEN



109

“Ultralight” nitrogen bottle

Code Item €

HF 05 071 Light bottle with reinforced carbon filter, 20 liters capacity• 200 kg service pressure• 300 kg test pressure• 9.1 kg unladen weight• Dimensions: Ø265, 698 mm heightSecurity Deposit 580.00

HF 05 072 20 liters nitrogen loading 120.00

Note: The security deposit will be get back when the bottle, which does not belong to the customer, will be returned.

CLEANING EQUIPMENT WITH NITROGEN/ FLUSHCode Item €

K 747 PLUS PORTABLE EQUIPEMENT

HF 05 111

• Allows to clean the air conditioning system in a continuous cycle

• It can be used in every installation with thepossibility of making flow the Flush clean liquidwith the same working pressure which releasesthe ground-in dirt

• Dimensions: 290 x 290 x 480 mm• Weight: 12 kgK 747 Plus portable equipment 1,350.00

K 747 PORTABLE EQUIPEMENT

HF 05 101

• User friendly equipment for the internal cleaningof the air conditioning system

• 10 bar working pressure which allowsremoving thoroughly impurities, oil, etc., retainedin the systems

• Supplied with a hose, a spray gun and an empty tank for Flush loading

• Requires a flush cleaning liquid bottle (HF 05 126or HF 05 127)

K 747 portable equipment 280.00

SPARE PARTS

HF 05 125 1 kg nitrogen throw-away bottle (100 liters / 110 bar)36.00

HF 05 121 SC refillable cleaning liquid bottleIncludes:• Cleaning throw-away empty bottle• Connection valves and frame• 600 mm pressure hose• Spray gun 130.00

HF 05 128 10 bar pressure reducer with manometer for nitrogen disposable bottle 105.00

WKL - 301 MODEL

HF 05 001

HF 05 129

Designed for the cleaning of cooling systems, specially used in case of burning of the motor compressor, humidity or before the starting ofa new installationFlow rate: 300 l/hPressure: up to 12 kgWeight: 17 kgInternal cleaner. 5 liters bottle

715.0098.00

K 747 Plus

K 747

Reducer set

SC

Nitrogen spare

MANDATORY

EXCLUSIVE USE

HF 05 129

− WEIGHT+ NITRÓGEN



CLEANING EQUIPMENT FOR COOLING CIRCUITSFLUSH models for cleaning with nitrogen

Code Item €• Flow rate: 840 l/h• Max. pressure: 0.45 MPa• Motor power: 0.6 kW (230 V)• Supply: 230-240 V. 50/60 Hz• Working temp.: 0 to 50 °C• Universal hose connection• 10 L tank• Dimensions: 300 x 200 x 550 mm• Mechanical filter on suction• It allows the cleaning of all residues caused by the

compressor or the filter break and completely remove oil residues from the system

• Suitable for all flushing fluids (non-flammable)WASHING STATION

HF 05 002 Flush 1 Plus HVAC 1,360.00WASHING AND SWEEPING STATION

HF 05 004 Flush & Dry HVAC. It allows sweeping the installation after flushing 1,475.00

LIQUID CLEANERS FOR COOLING CIRCUITSSolvent for circuit cleaning

Code Item €ECOCLEAN

Technical solvent specially developed for the cleaning of cooling and air conditioning systems. Also suitable for the cleaning of circuits and precision electrical equipment, motors andmetal components in general. NON-FLAMMABLE, non-ag-gressive for metals and with a higher dielectric rigidity than conventional products. To be used pure, as supplied, in sweeping, impregnating, rubbing, pulverizing or dipping operations. A sweep with dry nitrogen helps removing it from the cooling circuits.

GF 01 004 20 kg ECOCLEAN container 310.00

Degreaser for cooling circuits

Code Item €SOLKAL 14B1

Degreaser formed from highly refined paraffinic com-pounds. It does not contain aromatic substances, chlorine and HCFC. The product has been specially formulated to evaporate quickly without leaving any residue. It has a fast volatility (20 evaporation rate referring to ethyl ether 1).

Applications: used to remove dirt, oil, grease and resin. Especially helpful for cleaning cooling circuits, motors, tools, industrial parts, etc.

GF 01 006 16.5 kg SOLKAL 14B1 can (20 liters) 195.00

Internal cleaner

Code Item €SUPER FLUSH CLEANER

Internal cleaner for coils, batteries, etc.Ideal for the cleaning of systems where the compressor has burnt. Suitable for all type of oils and refrigerants.It eliminates acid.

HF 18 205HF 18 206

0.9 l HIGHSIDE can3.8 l HIGHSIDE can

34.00120.00

HF 05 126HF 05 127

1 liter SUPER FLUSH cleaning liquid bottle5 liters SUPER FLUSH cleaning liquid bottle

15.7570.00

HF 05 123HF 05 124

6 liters FLUSH cleaning liquid bottle20 liters FLUSH cleaning liquid bottle

130.00275.00

Features:- Density to 15 °C: 0.75 g/cm³.- Boiling point: 143 - 160 °C.- Flash point: > 30° C.- Viscosity to 25 °C: 0,91 mm²/s.

Super Flush1 l and 5 l



111

VACUUM PUMPSCode Model Power Flow rate

m/h €

SUPERLIGHT WITHOUT OIL

HF 06 107 BE-1NSL pump• One stage • Power: 230 V, 50/60 Hz• Vacuum: -0.08 mpa• Dimensions: 195 x 65 x 130 mm• Weight: 1.5 kg ONLY

60 W. 2.05115.00

ONE STAGE

HF 06 105 BE-1 N pumpVacuum: 75 microns, 0.1 mbarOil capacity: 400 mlWeight: 8.2 kg 1/5 CV 2.45 157.00

TWO STAGES


HF 06 108 BE-5 N pumpVacuum: 15 microns, 0.02 mbarOil capacity: 450 mlWeight: 12 kg 1/2 CV 7.9 360.00


COMPLETE TWO STAGES FOR R410A

HF 06 126 BE-2-VV pumpSame as BE-2N but equipped with manometer and solenoid valve for R410A 315.00

ACCESSORIES

HF 06 128

HF 06 127HF 06 129

Solenoid valve and vacuum gauge kit with 1/4", 3/8" and 5/16" reductionsH 1/4" SAE x M 5/16" reductionReplacement vacuum gauge

75.004.50

15.00

HF 04 428 159 BLU model case• 338 x 287 x 515 polypropylene case

with mobile tray• Blue color with handle and clasps 50.00

OIL FOR VACUUM PUMPSCode Item €

MINERAL OIL

HF 06 131• Specially indicated for all kind of vacuum pumps

“Robinair”, “Telstar”, “Wigam”, “ST”, etc. 1 l bottle 10.65

SYNTHETIC OIL

HF 06 133

• Special for vacuum pumps used with R134a, R404, R407c, 410A, etc.

1 l bottle 20.50

159 BLU case

Solenoid valve and vacuum meter kit

BE-1NSL

BE-1N / BE-2N

BE-2-VV



ANALYSERSCode Item €

MANIFOLD R22 - R134a - R404A - R407C

HF 06 223HF 06 224

Mod. RR 110• Ø80 gauges• 1 valveLOW gaugeHIGH gauge

26.5026.50

HF 06 200 Mod. RR 130• Ø 63 HIGH and LOW gauges• 2 valves 56.50

HF 06 204 Mod. RR 140• HIGH and LOW gauges• 4 valves• 3 1/4" plug and 1 3/8" vacuum plug 82.50

HF 06 209 Mod. RR 105• Ø 63 HIGH and LOW gauges• Ø 100 vacuum gauge in Mbar• 5 valves 142.00

MANIFOLD R22 - R427A - R422D - R417A

HF 06 201 Mod. RR 130/ New gases (for substitutions)• 2 HIGH and LOW gauges• 2 valves 26.50

HF 06 206 Mod. RR 140/ New gases (for substitutions)• 2 HIGH and LOW gauges• 4 valves• 3 1/4" plug and 1 3/8" vacuum plug 50.00

MANIFOLD R-410A, R404A, R407C

HF 06 225 Mod. RR 130/410A• Ø 63 HIGH and LOW gauges• 2 valves 56.50

HF 06 205 Mod. RR 140/410A• Ø 63 HIGH and LOW gauges• 4 valves 82.50

MANIFOLD R32 / R410A

HF 06 228 Mod. RR 130/R32• Ø 80 HIGH and LOW gauges• 2 valves• SAE 3 x 5/16" connection 63.00

SLIDE RULE

HF 06 161 Slide rule to determine the equivalence betweenpressure and gas temperature 8.75

SPARE VALVES FOR MANIFOLDS

HF 06 266HF 06 267HF 06 210HF 06 221

Manifold control RR 130/110 BLUEManifold control RR 130/110 REDValve control ST of HIGH redValve control ST of LOW blue

6.256.25

14.0014.00

HF 06 291HF 06 292HF 06 293HF 06 294HF 06 269

ST/RR manifold valve jointPTFE Ø16.85 x 22.3 x 1 ST jointØ20.3 x 23.85 x 1 ST brass jointPTFE Ø23.85 x 1 blind ST jointØ23.85 x 0.3 blind ST transparent jointR130/110 rubber joint

2.602.602.602.602.50

HF 04 403 Manifold case (320 x 290 x 114, blue) 11.00

Does not work with NITROGEN!

NITROGEN

NOSUITABLE

RR 110

RR 130

RR 140



113

ANALYSERS CASESCode Item €

MANIFOLD CASES

HF 06 255

HF 06 215

Mod. ESC 2000/3 The case contains:• 2 valves manifold R22, R134a, R404A and R407C• 1,500 mm 3 hoses set. 1/4" Teflon joint• Ø 80 HIGH and LOW gaugesMod. ESC 2000/4 The same as the former with:• 4 valves manifold• 3/8" vacuum plug

95.00

125.00

HF 06 257

HF 06 259

Mod. ESC 2000/3-410A, The case contains:• 2 valves manifold for R410A• 3 hoses set 1,500 mm connection 5/16"• H 1/4" SAE x M 5/16" reductionMod. ESC 2000/4-410A, The same as the former but:• 4 valves manifold for R410A• 3/4" vacuum plug

110.00

145.00

COMPLETE ANTISHOCK MANIFOLD CASE

HF 06 285 Mod. VMG-2-R410A• 2 ways manifold• R410A, R407C, R22 and R134a gases• Includes hose with ball valve• Thread 1/4" SAE - 1/4" Yellow, Red, Blue• Thread 1/4" SAE - 5/16" Red, Yellow• Length 1,500 mm• Ø 80 gauge with anti shock protection 145.00

HF 06 286 Mod. VMG-2-R134a• 2 ways manifold• R134a, R22, R404A and R407C gases• Includes hose with ball valve• Thread 1/4" SAE - 1/4" Yellow, Red, Blue• Length 1,500 mm• Ø 80 gauge with anti shock protection 110.00

R-744 MANIFOLD CASE

HF 06 280 Mod. ESC-R744• R-744 2 valves manifold (CO2)• 3 PTFE hoses set of 3 meters

1/4" SAE connection• Ø80 glycerin gauge

High 1 to 160 bar REDLow -1 to 100 bar BLUE 680.00

R600a, R600 AND R290 PRESSURE GAUGESCode Item €

• PULSE FREE system• High (red): -1 to 30 bar measuring range• Low (blue): -1 to 10 bar measuring range

1/8" NPT VERTICAL INTAKE

HF 06 445HF 06 446

Ø80 high pressureØ80 low pressure

26.5026.50

*Gauges for R-22, R-12 and R502 in stock (available until stock last).

R32 and R410A GAUGESCode Item €

• High (red): -1 to 53 bar measuring range • Low (blue): -1 to 38 bar measuring range

1/8" NPT VERTICAL INTAKE

HF 06 447HF 06 448

Ø80 high pressureØ80 low pressure

27.5027.50



GAUGES FOR R22, R134a, R404A, R407C and R410ACode Item €

FOR R22, R134a, R404A and R407C 1/8" NPT VERTICAL INTAKE

HF 06 263HF 06 262

• High (red): -1 to 35 bar measuring range• Low (blue): -1 to 15 bar measuring rangeØ 63 high pressureØ 63 low pressure

9.009.00

HF 06 489HF 06 490

Ø 80 high pressureØ 80 low pressure

12.5012.50

HF 06 479HF 06 480

Ø 63 high pressure glycerinØ 63 low pressure glycerin

23.0023.00

FOR R22, R427A, R417A and R422D 1/8" NPT VERTICAL INTAKE

HF 06 411HF 06 412


10.7510.75

FOR R134a and R404A - 1/8" NPT VERTICAL INTAKE

HF 06 471HF 06 472

• High (red): 0 to 31 bar measuring range• Low (blue): -1 to 8 bar measuring rangeØ 63 high pressureØ 63 low pressure

6.506.50

FOR R22, R134a, R404A and R407C 1/8" NPT REAR ENTRY

HF 06 433HF 06 434

• High (red): -1 to 38 bar measuring range• Low (blue): -1 to 18 bar measuring range• With assembly clipØ 63 low pressure glycerinØ 63 high pressure glycerin

24.7024.70

FOR R410A - 1/8" NPT VERTICAL INTAKE

HF 06 483HF 06 484


10.7510.75

HF 06 485HF 06 486

• High (red): -1 to 38 bar measuring range• Low (blue): -1 to 3.5 bar measuring rangeØ 80 high pressureØ 80 low pressure

13.2513.25

HF 06 481HF 06 482

• High (red): -1 to 38 bar measuring range• Low (blue): -1 to 18 bar measuring rangeØ 80 high pressure glycerinØ 80 low pressure glycerin

53.5553.55

"BLONDELLE” CLASS 1 GLYCERIN GAUGESCode Item €

FOR R22 - R134a - R404A - R407C

HF 06 420HF 06 421HF 06 422HF 06 423

• 1/8" NPT thread• 60 mm diameterHigh pressure 1 to 30 bar radialLow pressure 1 to 10 bar radialHigh pressure 1 to 30 bar rear entryLow pressure 1 to 10 bar rear entry

56.0056.0056.0056.00

FOR R410AHF 06 425HF 06 426HF 06 427HF 06 428

High pressure 1 to 40 bar radialLow pressure 1 to 20 bar radialHigh pressure 1 to 40 bar rear entryLow pressure 1 to 20 bar rear entry

63.0059.0066.0059.00

VACUUM GAUGECode Item €

HF 06 451HF 06 452HF 06 129HF 06 453

• -1000 to 0 mbar measuring range• 1/8" NPT threadØ80 vertical intakeØ80 rear intakeØ50 rear intakeRR-110V 1 valve manifold with Ø80 mm verticalvacuum gauge

25.0032.0015.00

46.00

Mod. Radial

Mod. Back



115

SHUT OFF VALVE FOR GAUGESCode Item €

HF 06 450 Mod. M2 264Shut off valve for gaugesthread: 1/4" SAE male-1/8" NPT female 39.00

RUBBER PROTECTORS FOR GAUGESCode Item €

HF 06 491HF 06 492HF 06 493HF 06 494HF 06 222

Ø 63 blue Ø 63 red Ø 80 blue Ø 80 red Ø 63 double protector for manifolds

3.253.254.754.756.50

DIGITAL VACUUM GAUGESCode Item €

«VG100A» VACUUM GAUGE

HF 06 601 • Range from 1 atm to 25 microns• Reading through 9 light LED• Includes hook and 1/4" connection• 25 hours operation with 9 V battery 310.00

«VG200» DIGITAL VACUUM GAUGE

HF 06 602 • Selectable measures: inches, mbar or microns• LCD display of 5 digits• 30 hours operation with 9 V battery 385.00

Code Item €

«VA116» VACUUM GAUGE

HF 06 604 • Measures: inches, mbar or microns• LCD display of 4 digits• 1/4" SAE connection• 25 hours operation with con 9 V battery• Resolution: 0.01 kPa 225.00

«VA116 KIT» COMPLETE VACUUM GAUGE KIT

HF 06 605 INCLUDES:• 360 x 280 x 75 mm metallic case• VA116 digital vacuum gauge• 1500 mm vacuum hose• 1/4 H. to 3/8 M.reduction with valve core• 1 way manifold• 9 V spare battery 285.00

HF 06 605

HF 06 604

VG200

VG100A

Doubleprotection



CHARGING HOSESCode Item €

R-22, R404A and R-407C HOSE

HF 06 322HF 06 323HF 06 324HF 06 326HF 06 305

• Teflon joint• 1/4" SAE connection• RED (High pressure)• BLUE (Low pressure)• YELLOW (Load or vacuum)3 hoses set 900 mm.3 hoses set 1,500 mm3 hoses set 2,000 mm3 hoses set 2,500 mmHose for vacuum 1,500 mm 3/8"

28.7536.5045.0052.5031.40

HF 06 353HF 06 354

• With CLOSING valve3 hoses set 900 mm3 hoses set 1500 mm

30.0036.00

R-410A HOSEHF 06 325HF 06 327

HF 06 127

3 hoses set 1,500 mm 5/16"x1/4" connection3 hoses set 1.500 mm 1/4"x1/4" connectionwith closing ball valveH 1/4" SAE x M 5/16" reduction

50.00

76.004.50

R-134a SPECIAL HOSEHF 06 341HF 06 342

3 hoses set 900 mm3 hoses set 1,500 mm

30.0040.00

SPECIAL HOSE HIGH PRESSURE WITH BALL VALVE AND DEPRESSOR

HF 06 372HF 06 374

HF 06 373

• Working pressure: 52 bar• Breaking pressure: 276 bar• Black hose with Y/R/B colored bushings• 1/4" SAE 45° x 1/4" SAE recto connections3 hoses set 900 mm3 hoses set 1,500 mm• 5/16" SAE x 5/16" SAE recto connections3 hoses set 1.500 mm R410A

96.00126.00

120.00SPARE PARTS


1/4" TEFLON joint for charging tool1/4" joint for hoses3/8" joint for hoses5/16" joint for hosesDepressor for 1/4" threaded charging hoses (fig. 1)Depressor for 1/4" copper pipe (fig. 3)Depressor for 1/4" charging hose by pressure (fig. 2)Spare hoses kit, 3 TEFLON joints includedand 1 depressor (fig. 4)

0.80060

0.950.950.653.401.25

3.00

QUICK CONNECTIONSCode Model €

QUICK CONNECTIONS

HF 06 029HF 06 030

• Quick connection for adapting 1/4" SAE hosesto 1/2" ACME (R-134A)

R - 9134 B Low straight connectionR - 9134 A High straight connection

20.0020.00

HF 06 033HF 06 034

• Quick connection for adapting 1/4" SAE hosesto 1/2" ACME (R134A)

R - 9134S - B Low square connectionR - 9134S - A High square connection

25.0025.00

HF 06 023HF 06 024

• Quick adjustable square connectionAV134-B6 3/8" SAE blue male (low)AV134-R6 3/8" SAE red male (high)

30.8030.80

HF 06 027HF 06 028

• SHUT-OFF quick connection1/4" SAE male / female connectionR410A 5/16" SAE male / female connection

31.5031.50

R410A QUICK CONNECTIONSHF 06 346HF 06 345

Straight connector 1/4" SAE-H turning x 5/16" SAE-MStraight connector 5/16" SAE-H turning x 1/4" SAE-M

17.5013.50

fig. 1fig. 3fig. 2

fig. 4

Shut-Off1/4" SAE twisting

3/8" SAEbracket

1/2" ACME1/4" SAE to1/2" ACME



117

CASES FOR REFRIGERATION ENGINEERSCode Item €

«STE» COMPLETE

HF 06 232 Equipped with:• 1 DIGITAL current clamp

(range 600 Amp., power 200-600 V c.a.,resistance 20 MΩ -2000 MΩ)

• 1 digital thermometer with probe(range from -50 to 260 °C)

• 1 electronic leak detector with progressive luminous and acoustic alarm of concentration (all HFC, HCFC and CFC gases)

• 1 portable welding kit• 1 hoses set length 900 mm• Two valves manifold with Ø63 R22, R-134a, R-404A and

R-407C gauge for HIGH and LOW pressureand hanging hook

• 1 Mini RR-127 pipe cutter (1/8" to 5/8")• 1 RR-274 pipe cutter (1/8" to 1-1/8")• 1 RR-275 flaring and expender tool

from 1/8" to 3/4"• 1 aluminium case 457 x 330 x 162 mm• 1 compartment for tools 400.00

TOOLS FOR COOLING

HF 06 233 Equipped with:• 1 DIGITAL current clamp

(range 600 Amp., power 200-600 V c.a.,resistance 20 MΩ -2000 MΩ)

• 1 hoses set length 900 mm• Two valves manifold with Ø63 R22, R-134a, R404A and

R407C gauge for HIGH and LOW pressureand hanging hook


• 1 PVC case 423 x 315 x 110 mm 275.00

«SE-2B» BASIC

HF 06 231 SE-2B, equipped with:• Two valves manifold with Ø63 R22, R-134a, R-404A and

R-407C gauge for HIGH and LOW pressure• 3 hoses set 900 mm• Metal reamer• Ø40 service mirror• 1/8" to 5/8" RR 127 pipe cutter• 1/8" to 1-1/8" RR 274 pipe cutter• RR 525 flaring tool• Ratchet wrench for service valves• 10" adjustable spanner 190.00

FOR GASES

R-22R-134AR-404AR-407C



CASES FOR REFRIGERATION ENGINEERSCode Item €

«STE» COMPLETE

HF 06 235 Equipped with:• 1 DIGITAL current clamp (range 600 Amp., power 200-

600 V c.a., resistance 20 MΩ -2000 MΩ)• 1 digital thermometer with probe (range from -50 to 260 °C)• 1 electronic leak detector with progressive luminous and

acoustic alarm of progression (all HFC, HCFC, CFC gases)• 1 portable welding kit• 1 hoses set length 1500 mm Teflon joint• Two valves manifold with R410A gauge, and Ø63 H 1/4"

SAE x M 5/16" reduction for HIGH and LOW pressure and hanging hook

• 1 Mini RR-127 pipe cutter (1/8" to 5/8")• 1 RR-274 pipe cutter (1/8" to 1-1/8")• 1 RR-275 flaring and expander tool from 1/8" to 3/4"• 1 aluminium case of 457 x 330 x 162 mm• 1 compartment for tools 435.00

TOOLS FOR COOLING

HF 06 236 Equipped with:• 1 DIGITAL current clamp (range 600 Amp., power 200-

600 V c.a., resistance 20 MΩ -2000 MΩ)• 1 hoses set length 1500 mm Teflon joint• Two valves manifold with R410A gauge, and Ø63 H 1/4"



• 1 PVC case 423 x 315 x 110 mm 300.00

«SE-2B» BASIC

HF 06 234 SE-2B, equipped with:• Two valves manifold with R410A gauge, and Ø63 H 1/4"


• 3 hoses set length 1500 mm• Metal reamer• Ø40 service mirror• 1/8" to 5/8" RR 127 pipe cutter• 1/8" to 1-1/8" RR 274 pipe cutter• RR 525 flaring tool• Ratchet wrench for service valves• 10" adjustable spanner 210.00

COMPLETE UNIVERSAL DOUBLE CASER-22-R134a-R404A-R407C-R410A

Code Item €

DOUBLE COMPLETE

HF 06 240 Equipped with:• Ø63 2 ways manifold (1/4" SAE)• Ø63 R410A 2 ways manifold (5/16" SAE)• 1500 mm 3 hoses kit (1/4" SAE)• 1500 mm R410A 3 hoses kit (5/16" SAE)• 275L flaring/ expander tool• RR 127 pipe cutter• RR 274 pipe cutter• RR 209 reamer• RR 122 ratchet wrench• SA-880 model digital thermometer SA-880 340.00

R410A



119

CASE FOR INSTALLERCode Item €

BASIC AIR CONDITIONER INSTALLER

HF 06 281 Mod. SE-B.I.A.-407cIt contains:• Metallic aluminium case 395x275x115• 2 ways manifold for R22, R134a, R407c and R404A• 1 set of 3 1/4" hoses 1500 mm length• 1 metallic reamer• 1 adjustable reamer 300x33• 3 reductions with joint• 1 pipe cutter 1/8" to 1-1/8" CT-274• 1 flaring tool 3/16" to 5/8" CT-525F• 1 ratchet wrench 1/4" to 9/16" 145.00

HF 06 282 Mod. SE-B.I.A-410ASame as the previous with Manifold and Pipes for R410A

158.00

PORTABLE GAUGECode Item €

PORTABLE GAUGE

Gauge with gun handle for air conditioning installationsto check the charge and eventually to add refrigerant in the system

HF 06 418HF 06 419

CLIMATEST R407CCLIMATEST R410A

90.00108.00

CHARGE DISPENSER CYLINDERCode Item €

FOR R134a, R407C, R404A

HF 06 078 • Cylinder with handle and protection• Includes safety valve to avoid overpressure

and ball valves 1/4" SAEMod. K2M/A6 of 2 kg 280.00

PHASE DETECTOR FOR COMPRESSORSCode Item €

Mod. TIF-130

HF 06 075 • Voltage: 100-1,000 V• Auto power off• Dimensions: 160 x 26 x 20 mm• Weight: 48 g• Display phase with red/green LED• Voltage detection without switch 62.00



DIGITAL ANALYSER BLUETOOTH + APP

Code Item €HF 06 002HF 06 003

TESTO 550TESTO 557 plus VACUUM measuring

475.00585.00

OPTIONAL ACCESSORIESHF 06 253 Ø6-35 mm clamp probe for temperature measurements from 40

to 125 °C (necessary for calculating overheating and cooling) 80.00HF 06 250 Transport case for manifold and accessories 141.00

TESTO 570-2 COOLING ANALYSER

Code Item €HF 06 246 TESTO 570-2

Includes:• 2 uts. clamp temperature probe Ø6.35 mm -40/+125 °C• EASY KOOL software with USB cable• Charger and batteries• Calibration protocol• Transport case 1,128.00

OPTIONAL ACCESSORIESIM 11 447HF 06 241HF 06 242

TESTO infrared printer0 -20/200 A clamp probe (intensity) with 2.90 m cable0 -15 bar oil pressure probe with 2.90 m cable

303.41290.00422.00

DIGITAL VACUUM GAUGE

Code Item €HF 06 247 TESTO 552 275.00

- Specially designed for service and maintenance of air conditioning and heating systems and heat pumps.

- 2 ways brass valves battery.- Measurement of aspiration pressure

and discharge (range: -1...39 bar)with its respective evaporationand condensation temperatures.

- Vacuum indicator.- 30 Refrigerants.- Two NTC temperature inputs to

measure overheating and subcooling.- Automatic detection of cooling/heating

cycle change.

- Maximum, minimum and average value.- Leak test.- Integrated rubber protection.- Dimensions: 200 x 113 x 62 mm.- Weight: 1060 gr.- Power supply: 4 x LR06.- Dimensions: 200 x 113 x 62 mm.

Includes:Batteries, two temperature probesfrom -40 to 125 °C with Ø6.35 mm clamp, transport casing and APP.

- Temperature and vacuum measurement.- Pressure, intensity and subcooling

measurement with optional probes.- Simultaneous calculation of overheating

and subcooling.- Waterproof test with temperature

compensation.

- Registration and printing of values up to72 hours.

- 40 stored refrigerants,100% update.

- MIN-MAX-AVERAGE visualization.- Leak test.- Dimensions: 280 x 135 x 75 mm.- Weight: 1,200 gr.

- Absolute pressure probe WITHOUT MAINTENANCE for an efficient vacuum production.

- Optical alarm if the limit valueis exceeded.

- Waterproof and dirt resistant.- Measuring range:: 1.100...0 mbar 825.080...0 micron- Accuracy: ± 1 digit.- Resolution: 0.01 hpa/10 micron.

- Absolute overload of the probe:6 bar/87 psi

relative: 5 bar / 72 psi- Measures: 250 x 165 x 55 mm.- Approx. weight: 500 g.- Protection: IP4L.- Power supply: 2 AA batteries.- Connections: 2x7/16" UNF.- Measurement units: mm. Hg, Torr, mbar,

hpd, inH2O, inHg, Pa, micron.

TESTO 570-2

Printer Probes



121

COOLING SMART METERINGSMART PROBES

Code Item €

«SMART PROBES»COOLING SET

HF 06 008 Cooling set for the pressure and temperaturemeasurement for cooling Smartphone/Tablet• 100% without cables• Measuring range: -1...60 bar / -40...+150 °C• Overheating and subcooling calculation• Registration of all the measurement process and

evolution chart• With the free App “Testo Smart Probes” for iOS and

Android devices• The set includes: – 2 x Testo 549i (Bluetooth high pressure probe

until 60 bar) – 2 x Testo 115i (Bluetooth probes of pliers

temperature)• Suitable for all gases including for water, R4xx,

R32,CO2, H2O, N, etc.• Mobile device not included 368.00

«SMART PROBES» PROBES

HF 06 015 TESTO 115i• Clamp thermometer for Smartphone 83.55

HF 06 016 TESTO 549i• High pressure manometer for Smartphone 100.25

All measured values in the displayThe measured values are shown instantly in the App in chart or table form.

Visualization ofvarious toolsAllows visualizing values up to 6 Smart Probes at the same time, for example, you can compare pressures and temperatures in cooling systems.

testo 549i

testo 115i

Download AppSmart Probes



DIGITAL ANALYSERCode Item €

Mod. FOX-100

HF 06 275 • 4 ways piston manifold (Low, High, Ref, Vac)• Database with more than 45 refrigerants

(CFC, HCFC, HFC, Hydrocarbons)• 1 ambient temperature probe• 2 K type temperature probes (range: -99.9 ÷ 200 °C),

pressure transducers (range: -0.99 ÷ +48,90 bar)• Max. working pressure: 56 bar• Accuracy better than 1%• Liquid or vapor (possibility to differentiate between

LOW and HIGH) with non-azeotropic refrigerants• Vacuum measurement in both working sides (0.01 bar)• Power supply with battery (9 V)• Plastic case• 2 TK109 probes included 355.00

Mod. FOX-R717

HF 06 701 Manifold for AMMONIA with steel connection 575.00

Mod. FOX-R744 (CO2)

HF 06 702 CO2 manifold 575.00

Mod. FOX-400 (R32)

HF 06 703• 1/4" valve and 2 5/16" valvesManifold for R32 515.00

RECOVERY AND RECYCLING EQUIPMENTSCode Item €

IMPORTANT: Compatible with all CFC, HCFC or HFC refrigerant gases, including mixturesof R404A, R407C, R410A, R134A, R22a and R22a.Distillation system with flow regulation of the liquid refrigerant which allows the separation of oil and additives with a very high efficiency.

Mod. VRR12L-0S

HF 06 583 • Recovery: 15 kg/h vapor phase108 kg/h liquid phase336 kg/h Push-Pull phase

• Max. working pressure: 38.5 bar• Power: 3/4 CV 1,100.00

Mod. EASY REC R1

HF 06 018 • Recovery: 16 kg/h vapor phase132 kg/h liquid phase378 kg/h Push-Pull phase18 kg/h recycled

• Maximum working accuracy: 38.5 bar• Power: 230V 50/60 Hz• Net weight 18.9 Kg• Congruent A2L 1,629.00

FOX-100

RECOMMENDED

R32



123

RECOVERY AND RECHARGE EQUIPMENTSCode Item €

• IMPORTANT: Compatible with all CFC, HCFC or HFC refrigerant gases, including mixtures of R404A, R407C, R134A, R22a, R410A and R22a.

Mod. CM2000

HF 06 576 • Recovery: 16.8 kg/h vapor phase120 kg/h liquid phase385 kg/h Push-Pull phase

• Max. working pressure: 38 bar• Power: 220 V 50 Hz• 1/2 CV compressor• Dimensions: 480 x 220 x 370 mm• Weight: 17 kg• Includes folding handle and 2 transport wheels 830.00

Mod. RW125

HF 06 561 • Recovery: 13.8 kg/h vapor phase94.20 kg/h liquid phase378 kg/h Push-Pull phase

• Power: 1/2 CV• Dimensions: 500 x 220 x 340 mm• Weight: 12 kg• Power: 220 V 50/60 Hz 750.00

Mod. RW 225


• Power 1 HP• Dimensions 485 x 260 x 365 mm• Weight: 16 kg• Voltage 220V 50/60 Hz 1,225.00

Mod. MINIMAX-E


• Max. working pressure: 38.5 bar• Power: 380 W• Weight: 10.5 kg 950.00

Mod. VORTEX DUAL

HF 06 020 • Recovery: 25 kg/h vapor phase 288 kg/h liquid phase469 kg/h Push-Pull phase

• Maximum working accuracy: 38 bar• Power voltage 230V 50/60 Hz • Double piston compressor• Microchannel condenser• Net weight 13.5 kg• Compatible A2L 1,255.00

PORTABLE RECYCLING KITCode Model €

Mod. RECOVERYMATE

HF 06 290 It can be used with any recovery equipment andwith all gases• 4 ways manifold• drying filter eliminates humidity of the recovered

refrigerants• Humidity display• Transport case with handle• High capacity oil separator• Dimensions: 380 x 430 x 100 mm• Weight: 5.5 kg• RECOVERYMATE equipment including hoses 630.00

PORTABLE

HANDLE—

WITHWHEELS

COMPATIBLE

R32

Warranty3 years

RECOMMENDED

R32



DIGITAL CHARGING SCALESCode Item €

DIGITAL SCALE

HF 06 495

Load

100 kgMaximum

CC 220• Allows to measure accurately the passing

of the tank refrigerant• Capacity: 100 kg• Resolution: ± 10 g• Weight: 2.55 kg• Accuracy: ± 0.15% from the value• Power supply: 9 V alkaline battery 315.00

DIGITAL SCALE

HF 06 513

Load

100 kgMaximum

SCALE SE100-10• For the accurate measuring of refrigerants• Capacity: 100 kg• Resolution: ± 10 g• Weight: 2.485 kg 170.00

DIGITAL SCALE

HF 06 511

Load

70 kgMaximum

SCALE SE70-5• For the accurate measuring of refrigerants• Capacity: 70 kg• Resolution: ± 5 g• Weight: 2.05 kg 160.00

PROGRAMMABLE DIGITAL SCALE

HF 06 514

Load

100 kgMaximum

SCALE SE100-10-P• For the accurate measuring of refrigerants• Refill programmer. It includes end

of program alarm• Capacity: 100 kg• Resolution: ± 10 g• Weight: 2.74 kg 335.00

BLUETOOTH DIGITAL SCALE

HF 06 506

Load

115 KgMaximum

WEY-TEK HD WIRELESS mod. 719-203-61• Allows to measure accurately and make registrations

on Smartphone, IOS, Android. Free App• Maximum capacity: 115 kg• Resolution: 10 g• Weight: 4.08 kg 643.00

SCALE FOR SMALL BOTTLES

HF 06 505

Load

5 kgMaximum

BM 500C• Digital scale for bottles of 1kg and 2kg• Capacity: 5 kg.• Resolution: 1 g up to 1 kg 2 g > 1 kg• Power supply through battery 52.00

SUPER

ACCURACY!



125

AUTOGENOUS WELDING DEVICESCode Item €

COMPLETE EQUIPMENTS

HF 07 001

2850°C

MINI OXI-BUTANE EQUIPMENT• Pressure reducer with gauges• Camping key• Camping cylinder GLP 0.5 kg• 400 l O2 cylinder (small)• S-194-C complete torch• O2 check valves• Bichromate cart• 3 meters double hose• Total weight: 10 kg 400.00

HF 07 003

2850°C

PORTABLE OXI-BUTANE EQUIPMENT (2.8)• Camping key• 2.8 kg camping cylinder• Oxyflam 1.1 m³ Oxygen Cylinder• S-194-C complete torch• O2 check valves• Pressure reducer with gauges• Bichromate cart with wheels• 3 m double hose• Total weight: 20 kg 560.00

HF 07 004 PORTABLE OXI-BUTANE EQUIPMENT (2.8)• Identical to the previous one but with hose of 5 m 570.00

HF 07 005

3500°C

PORTABLE OXYACETYLENE EQUIPMENT• 0.7 kg acetylene cylinder• Oxyflam 1.1 m³ Oxygen Cylinder• S-194-C complete torch• Check valves• O2 and acetylene regulator with gauges• Bichromate cart with wheels• 3 m double hose• Total weight: 29 kg 1,125.00

OXYGEN CYLINDERS AND REFILLS


400 l oxygen cylinder (2 l x 200 bar) flat base400 l oxygen cylinder charge 0.4 m³ (2 l x 200 bar)1.1 m³ Oxyflam oxygen cylinder (5 l x 200 bar) flat base1.1 m³ Oxyflam oxygen cylinder charge (5 l x 200 bar)1.5 m³ aluminium oxygen cylinder (7 l x 200 bar) flat base1.5 m³ aluminium oxygen cylinder charge (7 l x 200 bar)2.5 l oxygen cylinder2.5 l oxygen cylinder charge

200.0038.25

285.0052.00

415.0076.50

182.0036.00

BUTANE BOTTLES AND REFILLS

HF 07 091HF 07 092HF 07 093HF 07 094HF 07 095

0.5 kg butane bottle0.5 kg refill2.8 kg butane refill2.8 kg refillCap with handle

35.008.00

49.0030.003.50

ALbee COMPLETE BOTTLE

HF 07 171HF 07 172HF 07 173HF 07 174

• Hand reducer included• Free maintenance for bottles• Flowmeter integratedB-5 oxygen bottle1.1 m³ oxygen charge (5 l x 200 bar)B-11 oxygen bottle 2.3 m³ oxygen charge (11 l x 200 bar)

375.0052.00

670.0082.00

Ergonomic Quick coupling Quick openingand closing

Adjustable flow Permanent control

Bottles aresupplied with

CLIPPER protection



AUTOGENOUS WELDING DEVICESCode Item €

ACETYLENE CYLINDERS AND CHARGES

HF 07 161HF 07 124

0.8 kg Oxyflam acetylene cylinder (5 l x17 bar)0.8 kg Oxyflam acetylene cylinder charge (5 l x 17 bar)

* Acetylene charges only in main branch offices.

553.00126.00

ALbee COMPLETE BOTTLE

HF 07 165HF 07 166

• Hand reducer included• Free maintenance for bottlesB5 acetylene bottle0.8 kg acetylene charge

563.00128.00

ACCESSORIES AND TORCH

HF 07 201HF 07 202HF 07 203HF 07 204HF 07 205HF 07 208HF 07 209

S-194-C complete torch modelS-194 handle model194 P/A mixer model194-B burner-holder handle modelS-36 cutter accessory modelSA-265 sparkerSA-26L 5 stones case

78.3545.2017.0014.20

100.005.953.00

BURNER-HOLDERS

HF 07 216HF 07 217HF 07 218HF 07 219HF 07 220HF 07 221HF 07 213HF 07 211HF 07 212

Welding burner-holder GLP No. 2 N (1 mm) HS2PWelding burner-holder GLP No. 4 N (2 mm) HS4PWelding burner-holder GLP No. 6 N (4 mm) HS6PAcetylene welding burner-holder No. 1 N (1 mm) HS1AAcetylene welding burner-holder No. 3 N (2 mm) HS3AAcetylene welding burner-holder No. 5 N (4 mm) HS5AHeating burner-holder GLP HSHPCutting burner-holder (6 mm)Acetylene cutting burner-holder (6 mm)

9.806.256.256.256.256.25

31.2531.2531.25

CHECK VALVES

HF 07 241HF 07 242

S-88-O oxygen check valve modelS-88-A acetylene check valve S-88-A

13.7517.00

HOSE


Set of double of 3 m Oxy-Butane hoseSet of double of 5 m Oxy-Butane hoseSet of double of 10 m Oxy-Butane hoseSet of of 3 m Oxy-Acetylene hoseSet of of 5 m Oxy-Acetylene hoseSet of of 10 m Oxy-Acetylene hoseSet of of 5 m Oxy-Acetylene hose, ALBEE B5 connectionSet of of 10 m Oxy-Acetylene hose, ALBEE B5 connection

45.0056.0088.0045.0056.0085.0058.0088.00

ACCESSORIES

HF 07 111HF 07 112

Cart for Mini Oxy-Butane equipmentCart for Mini Oxy-Butane equipment

56.6589.60

HF 07 199 Welding protection glasses 6.44

HF 07 231HF 07 232HF 07 234

Regulator for Oxygen S-101-ORegulator for Oxygen S-101-ASpare regulator membrane

76.0084.0015.50

S-194-C

Acetylenebottle

ALbee complete

bottle

S-194

194-B

SA-265

GLP HSP bottle

Nozzles

S-88-A

S-88-O



127

Accessories for autogenous welding equipment

Code Item €ACCESSORIES

HF 07 251HF 07 252HF 07 253HF 07 261

Set of burner rubber coupling OxygenSet of burner rubber coupling AcetyleneSet of burner 21.8 left of Ø 5 mmBlue butane valve for camping

4.504.506.50

16.00HF 07 265HF 07 264HF 07 266HF 07 267

Oxygen gauge 0 to 16 bar/psi Ø50 1/8"Oxygen gauge 0 to 315 bar/psi Ø50 1/8"Oxygen/Acetylene gauge 0 to 2.5 bar/psi Ø50 1/8"Acetylene gauge 0 to 40 bar/psi Ø50 1/8"

8.008.00

10.0010.00

HF 07 291HF 07 292HF 07 293HF 07 294

Oxygen gauge 0 to 16 bar/psi Ø50 1/4"Oxygen gauge 0 to 315 bar/psi Ø50 1/4"Acetylene gauge 0 to 2.5 bar/psi Ø50 1/4"Acetylene gauge 0 to 40 bar/psi Ø50 1/4"

8.508.50

10.7510.75

HF 07 290 Rubber protection for pressure gauge Ø50 black 8.70

Manual welding equipments

Code Item €AUTOGENOUS WELDING EQUIPMENT

HF 07 268

HF 07 269HF 07 270HF 07 280

Mod. TURBO SET 90With non refillable OXYGEN110 bottle, MAXIGAS cartridge, MIGNON oxygen pressure reducer, gas tap with a check valve, grip with regulation taps and burner110 bar spare oxygen chargeMAXIGAS 400 cartridge of gasSpare welding nozzle

225.0040.0016.0014.00

Welding equipments with disposable bottle

Code Item €WELDING EQUIPMENT

HF 07 273

HF 07 274

Mod. RE “Metallic”Trigger start ignitionSafety buttonMod. RE Torch with flame adjustment control and trigger start ignition

63.00

45.00HF 07 272 Mod. KT with hose

Ideal for areas of difficult access, allows works in inverted position, trigger start ignition 105.00

SPARE BOTTLESHF 07 277 Methyl acetylene propane disposable charge according to CE standards

12 bottles box14.50

13.50/pc.

Welding briefcases

Code Item €BRIEFCASE

HF 07 276 Escoclima briefcase with: RE “Metallic” torch2 disposable gas bottles 115.00

Welding equipment

Code Item €WELDING EQUIPMENT

HF 07 421 LT92 Torch adjustable ignition, automatic start 98.00HF 07 431 LT8250 Torch with hose and reducer, stainless tube, it

allows operations in inverted position. 133.00HF 07 423 WLT92CF case

Contains LT92 torch and 2 cartridge “MAP-PRO” 158.00HF 07 425 Spare nozzle for LT92 torch 10.50

SPARE CARTRIDGEHF 07 433 WORTHINGTON disposable bottle, model “MAP-PRO”,

flame temperature 1982,2 °C12 bottle box

16.6515.40/pc.

3050 °C

Escoclimamod. RE Metallic

Mod. KT

Mod. RE

Turbo SET 90

Valve

Pressure gauge

Rubber protection

LT92

LT8250

WLT92CF Disposable charge



Sticks for welding

Code Model Meltinginterval % Silver Stick Ø Box €

Packing

HF 07 301HF 07 303HF 07 305HF 07 306HF 07 307HF 07 308HF 07 351HF 07 352HF 07 353HF 07 354

MRP 8MRA 2MRA 5MRA 5MRA 15MRA 15MRP 25*MRP 25*MRP 34*MRP 34*

710-750 °C645-800 °C645-810 °C645-810 °C645-810 °C645-810 °C

2%5%5%

15%15%25%25%34%34%

2 mm2 mm2 mm2 mm2 mm2 mm2 mm2 mm2 mm2 mm

500 g500 g500 g250 g500 g250 g500 g250 g500 g250 g

Check website for

updated prices

APPLICATIONSMRP 8, MRA 2, MRA 5 and MRA 15 types: COPPER - COPPER without deoxidizer

COPPER - BRASS with deoxidizerMRP 25 type: COPPER - COPPER tube BUNDYMRP 34 type: COPPER - COPPER tube BUNDY - STAINLESS STEEL

Flux coated sticks for welding

Code Model Meltinginterval % Silver Stick Ø Box €

Packing

HF 07 381HF 07 382HF 07 383HF 07 384

MR 25 FCMR 25 FCMR 34 FCMR 34 FC

25%25%34%34%

2 mm2 mm2 mm2 mm

500 g250 g500 g250 g

Check website

for updated pricesHF 07 340 BLOCKADE (Cu 7 Sn 7 Ni). Similar applications as MR

5 and MR 15, with similar mechanical characteristics and even easier application

Reel string- welding aluminium-copperCode Item €

SILVAL ZnAlAg4

HF 07 319

• Low fusion temperature 440°-470°• Welds aluminium-alum./alum.-copper/alum-brass• 200° below aluminium fusion temperature• With paint-stripperSILVAL ZnAlAg4 reel of 50 g x 2 mm

Check website

for updated prices

Rust-removingCode Item Box €

HF 07 320HF 07 321HF 07 322

• Suitable for copper, ironing andnot ironing metallic alloys

• Activity temperature: 500 to 800 °CFORTEX (Powder)FORTEX (Powder)MF CP (Paste)

100 g250 g500 g

4.608.25

15.75

Aluminium welding kitCode Item €

WELDING KITHF 07 325 • Paint stripper and welding for aluminium kit

• For the welding of aluminium-aluminium and copper-aluminium 72.00

Leak seal stick in evaporatorsCode Item €

HEAT SEAL STIKHF 07 365 • By providing material

• Do not heat directly• Epoxy sealer stick 67.00

Electric welding tin gunCode Item €

CASE FOR WELDING TIN GUNHF 07 401 • For tin welding

• Power: 100 W• Voltage: 230 V 25.00

* Rods WITHOUT CADMIUMaccording to European Standard CE-494-2011-annex XVII.

El



129

Welding unit for plumbing

Code Item €WELDING UNIT WITH MULTIGAS BOTTLE

HF 07 297 Mod. EUROSET. Disposable welding torch.Multiple applications. Working temp. 730 °C.Including Multigas 300 disposable bottle (600 ml) and burner Ø22 mm 64.50

HF 07 299 Multigas 300 disposable bottle. Special mixture with40% propane and 60% butane. 600 ml. For Euroset 10.00

POCKET WELDING UNITHF 07 296 Mod. MULTIUSO (refillable gas)

• Includes: 2 torches, one for wide solderand another for thin solder 33.00

SOFT WELDING KITHF 07 298 Mod. MT-1, equipped with:

• Handle• Ø21 mm spear• Camping gas wrench• 2 meters hose with terminals “to apply to the camping

gas bottle” 74.00

Soft welding stripper

Code Item €STRIPPERS

HF 07 323HF 07 324

Stripper with 100 g “gel” brushStripper with 125 g “paste” brush

2.954.50

Welding tin for pluming

Code Item €WELDING TIN


Tin/copper roll 3% of 250 gTin/silver roll 3.5% of 250 gTin/silver roll 5% of 100 gTin/silver roll 5% of 250 gTin/silver roll 6% of 100 gTin/silver roll 6% of 250 gTin/silver roll 8% of 100 gTin/silver roll 8% of 250 g

Check ourprice

Cleaning and welding protection

Code Item €THERMAL PROTECTING BLANKET

HF 07 278 THERMIC SHIELD• Dimensions: 200 x 270 mm• Material: Aluminium-ceramic cardboard without asbestos• FlexibleSupplied in 3 uts. pack

10.007.50/pc.

THERMAL BLANKETHF 07 279 • Dimensions: 330 x 200 mm

• It withstands direct fire without burning on oneside only (does not heat the aluminium side)

• It withstands temperatures up to 1,000 °C 42.50CLEANING SANDPAPER IN ROLL

HF 07 331HF 07 332

Industrial roll 25 m x 38 mm G-60Industrial roll 25 m x 38 mm G-80

45.0045.00

CLEANING STEEL WOOL BAGHF 07 335 Cleaning steel wool with 10 uts. 5.00

Protection against heat transmission

Code Item €ANTI-CALORIC PASTE

• Stops the heat or flame during the welding, protecting the valves or parts sensitive to heat

HF 07 361 THERMAL BLOCK• 312 g tube 29.60Thermal Block

SteelwoolSand paper for

cleaning

Thermalmat

Heatshield

Tin

Stripper“gel”

Stripper“paste”

MT-1

MULTIUSEtype

EUROSET



Anti-caloric gel

Code Item €

AIR FIRE

HF 07 372

• Scatter the heat and prevents heat damage to components during soldering

1 liter spray 21.30

REFRIGERANT GAS LEAK DETECTORSManual

Code Item €

BUTANE GAS DETECTOR

HF 08 011HF 08 013

• The leak causes visible change of color fromblue into green of the flame

Mod. 16845 complete with loadPropane load

98.0019.00

“CONTROL-GAS” LEAK DETECTOR

MA 10 211

• If there is a leak, bubbles will form up• Not flammable400 ml sprayBox with 24 “CONTROL-GAS” sprays

7.956.35/pc.

TRAX “Liquid Leak Detector”

HF 18 071HF 18 072

• Long life bubble-type liquid leak detector• It detect losses up to 1 micron• It evaporates without residues38 ml bottle380 ml bottle with extensible pick

5.8011.30

HIGH SENSITIVITY LEAK DETECTORWith hot platinum diodes

Code Item €

Mod. TEK-MATE

HF 08 141 • Refrigerants: CFC, HCFC and HCF• Sensor durability: 100 hours• Sensitivity (EN 14624): 1-2 g/year• Sensitivity (SAEJ 1627): 11 g/year• Autonomy: ±16 hours• Power supply: alkaline batteries• Automatic restart• Audible signal with variable intensity and lighting led 398.00

HF 08 142HF 08 143HF 08 155

Accessories :Filters kitSpare sensorEarphones (for noisy background)

38.80115.0061.20

Mod. SLD-300

HF 08 120 • Refrigerants: all CFC, HCFC and HCF• Sensitivity: 2 g/year• Response time: < 2 seconds• Shows battery status• Shows sensor error• Stainless flexible sensor 225.00

Mod. GAS MATE

HF 08 176 • Minimum sensitivity: 6 g/year• Operation temperature: -25 °C to + 50 °C• Weight: 540 g• Hand and automatic calibration 380.00

16840

Gas control

TRAX

TEK-MATE

SLD-300

GAS MATER-290

R-600

GAS



131

REFRIGERANT GAS LEAK DETECTORSWith ultrasonic sensor

Code Item €MOD. WHISPER

HF 08 171

HF 08 175

• Suitable for all refrigerant gases, compressed air, combustible gases, vapor leaks, vacuum...

Operating temperature: 0 °C to + 50 °C• Weight: 250 g• 9 V alkaline battery and storage case• Detects ultrasound of more than 40.5 kHzAccessories:Transmitter for Whisper

582.00

301.00

Universal leak detectorCode Item €

HF 08 145 CPU-C• Seven levels of sensitivity• Acoustic and light signal• Sensitivity 3 g/ for all gas refrigerants (R410A, R407C,

R22, R404A, R507, R134A...)• Metallic sensor• Includes: Aluminium case, 1 spare filter, batteries

SUITABLE

FOR ALL

REFRIGERANT

GASES

155.00HF 08 146 Spare sensor (max. 20 hours operation) 25.00

CO2 leak detectorCode Item €

MOD. D-TEK CO2

HF 08 172HF 08 152

• Minimum sensitivity: 6 g/year• Working temperature: -25 °C to + 50 °C• Weight: 540 g• Hand and automatic calibrationD-TEK for CO2D-TEK SELECT for CFC, HCFC, HFC and R717 (ammonia)

1,122.00908.00

INTERNAL LEAK DETECTORInternal detector in cooling circuits

Code Item €

HF 18 221HF 18 222

HF 18 224HF 18 225

• Bright red detector for refrigeration and air conditioning systems with fluorescent additive with any ultraviolet light source

• Introduce with injector gradually• Approx. 8.3 l dose detector for each1 kg gasTRACE (mineral oils)116 ml plastic bottle460 ml plastic bottleTRACE 2 (ester base oils)• Universal for all types refrigerant gases including

CFC’s, HFC’s and HCFC’s116 ml plastic bottle460 ml plastic bottle

19.5042.50

20.5051.50

Internal leak detector for systems with waterCode Item €

HF 18 251HF 18 252

• Hard leaks localization in closed systems containing water and antifreeze compounds (such as ethylene or propylene glycol)

• Chemically inert• Leaks show as bright red stains (bright orange glow

when exposed to ultraviolet light source)HYDRO TRACE 460 ml bottleHYDRO TRACE 3.8 liters container

17.8592.95

Dye cleaner leak detectorCode Item €

HF 18 226 DYE WASH cleaner removes any type of leak detecting dyefrom equipments and pipe surfaces to prevent false readingduring future and follow-up leak detection. 27.00

INTERNAL DETECTOROF REFRIGERANT LEAKS

INTERNAL DETECTOROF REFRIGERANT LEAKS



LEAK DETECTION FOR ULTRAVIOLET LAMP

Cooling

Code Item €

SPECTROLINE CASEOPK 100 BIG CAPACITIES

HF 08 405 Mod. OPK-100 BEZ, equipped with:• Carrying case, glasses and cleaning spray• OPTIMAX lamp without cables (6 hour work)• Recharging battery + charger• BIG-JET introduction system (head, hose)

and 32 ester oil doses) 570.00

BIG-JET SPARE PARTSFOR OPK -100

HF 08 427HF 08 423HF 08 424HF 08 406HF 08 441

• One capsule contains up to 32 dosesBEZ-400/E Complete kit Big-Jet + ester dosesBEZ-4 Capsule 32 doses BIG-JET mineral oilBEZ-4/E Capsule 32 doses BIG-JET mineral oilOPTIMAX lamp with charger and glassesGLO-AWAY CR800 cleaner spray with fluorescent doses

310.00208.00224.00308.0024.50

SPECTROLINE CASEOPK 40 SMALL CAPACITIES

HF 08 408 Mod. OPK-40 EZ/E, equipped with:• Carrying case, glasses and cleaning spray• OPX400 lamp with LED technology of high intensity• 3 batteries AAA (autonomy more than 6 hours) 280.00

TRACER-JET SPARE PARTSFOR OPK -40

HF 08 410HF 08 409

• One capsule contains up to 14 dosesEZ-100/E Complete kit Tracer-Jet + Universal dosesEZ-4/E Capsule 14 doses Tracer-Jet Universal

165.2030.40

Code Item €

DETECTION KIT CASE

HF 08 456 Mod. RK1312 includes:• 250 ml bottle with dispenser Brilliant• Identification labels• 100 ml spray Brilliant Remover• 50 ml refillable injector for syringe • Adapter for vehicles with side quick connector low

pressure for R134A• Adapter 1/4" SAE with safety valves• Adapter 5/16" SAE (R410A) with safety valves• Lamp leak detector 9 led U/V• Protection glasses 135.00

Dosage: (to select)1. Graduation for 0.5 l oil1. Graduation up to 1.3 kg of gas



133

LEAK DETECTION FOR ULTRAVIOLET LAMPCode Item €

FLASHLIGHT + U.V. GLASSES

HF 08 407 Mod. 53517-UV• U.V. flashlight of 17 LED• 4 hours battery life• Includes U.V. glasses 70.00

ACCESSORIES

HF 08 453HF 08 454HF 08 455

250 ml fluorescent fluid bottle100 ml fluorescent leakage cleaner bottle1 l fluorescent leakage cleaner bottle

30.004.70

17.50

OIL TRANSFERCode Item €

OIL RECHARGE PUMP

HF 09 006

To pump oil from the tank to a pressurized systemMod. Transfer MINI MAX TransFer. Includes rubber adapter for all bottles 120.00

OIL DRAIN PUMP

GA 07 110

• Including suction-impulsion pipes• 15-20 l/min flow rateMod. Lever 61.80

OIL INJECTORS

HF 09 031HF 09 032

• To install in the low line of the analyzer and oil regulation function

Mod. DS/0-12 Injector 1/4" SAE connectionMod. DS/0-134 Injector 3/8" SAE connection

40.0035.00

PUMP FOR CHECKING WATER SYSTEMSCode Item €

MA 09 001

Effective water pump for the testing of heating systems,plumbing installations, etc.• 5 liters tank• Max. Pressure: 40 bar• Suction volume: 45 ml approx.• Plunger greaserMod. PR 40 190.00

TEST PLUG

MA 09 005MA 09 006

• End cap for leakage control• Working pressure: 20 bar1/2 RED color cap (100 pcs. bag)1/2 BLUE color cap (100 pcs. bag)

0.75/pc.0.75/pc.

IN-LINE INJECTORCode Item €

• Allows introduction of liquid into loadedand sealed systems

• Completely reusable

IN-LINE INJECTOR

HF 18 211HF 18 215

Metallic body thread 1/4" M SAE. 29 ml load.Metallic body thread 1/4" M SAE. 59 ml load.

120.0022.00

CHARGE INJECTOR

HF 18 212HF 18 213

• Metallic body thread 1/4" M SAE7.5 ml to 15 ml load15 ml to 60 ml load

88.00115.00

Mod. 53517-UV

Mod. Mini Max

Mod. DS

Mod. Lever

RED HOSE

UPPER PARTCONNECTION

COND

ENSE

R UN

IT

INJECTOR SYSTEM

LOWER PARTTO

THE EVAPORATOR UNIT

FROM THE EVAPORATOR UNIT

COM

PRES

SOR

FAN



ANTIFREEZING FOR COOLING SYSTEMSCode Item €

ICE BLOCK

HF 18 081

• Propylene glycol antifreeze liquid protecting up to -73 °C• Non-toxic

3.8 liters bottle60.00

MAINTENANCE AND PROTECTION SPRAYSCode Item €

COLD ZINC SPRAY

MA 10 102• Heat resistant up to 120 °C within 15/20 minutesCold zinc sprayZINCOL 12 pcs. box

8.357.30/pc.

COPPER COATED SPRAY

MA 10 105

• To protect metallic surfaces(welding, plumbing, components)

• Effective anti-rusting power• Quick drying (only 5 minutes)• Heat resistant 150 °CCopper coated spray (400 ml) 10.00

STAINLESS STEEL SPRAY

MA 10 106

• To protect metallic surfaces (pipes welding, heatingelements, water tanks, etc)

• Rust proof and fire resistant• Quick drying (only 5 minutes)• Resistant to heat 300 °CStainless steel spray (400 ml) 10.75

DEHUMIDIFYING SPRAY

MA 10 107

• Removes humidity, high dielectric efficiency, protection and lubrication function

• Perfect for using in electric systems andmetal surface

• Does not damage metals, rubber, lacquers, enamels, etc.ANTI-HUMIDITY spray (400 ml) 9.15

MULTI-USE LUBRICANT SPRAY

MA 10 108

• Oxide protection• Good for oil products cleaning• High lubrication performance• Humidity protection• Removes blocked mechanismsLUBRICANT Spray (400 ml) 7.25

«TF-LUBE» LUBRICANT-TEFLON SPRAY

MA 10 109

• Lubricates and allows a complete long lasting Teflon® coating protection

• Working temperature range: -35 to +250 °CTF-LUBE spray (400 ml) 13.75

SPRAY LOOSEN-ALL

MA 11 249

• Lubricates and avoids the oxide releasingmetallic sets

CARAMBA spray (200 ml) 4.95DE-ICING

MA 11 304 Frosting melting spray (520 ml) 9.50SLIP-RESISTANT

MA 11 325 Slip-resistant spray for surfaces and floors (520 cc) 16.00AIR PROTECT

MA 11 307 Protector spray for battery fins against rusting 16.50AIR GASLEAK

MA 11 324 Leak detector foam and compressed air 12.45

DEGR

EES

CENT

IGRA

DE

(%) ICE BLOCK PERCENT

CONSTANT LIQUID LEVEL

PROTECTIONAGAINST PIPEBREAK

MA 10 102 MA 10 105

MA 10 106

MA 10 107

MA 10 108

MA 10 109 MA 11 304

MA 11 307 MA 11 324

MA 11 249

MA 11 325



135

SMOKE GENERATOR FOR LEAKAGE DETECTIONCode Item €

MA 10 506

• Emission time: 3 to 4 minutes• Size: 63 x Ø32 mm• White smoke• 55 m³ cartridge5 cartridges container 75.50

ARTIFICIAL SMOKE GENERATORCode Item €

LEAK DETECTORS IN DUCTS

MA 10 520

With the artificial smoke generator, you will be ableto control leaks in any type of ducts. Wait 4 min.to produce smokeFeatures:• Voltage: 220 V, pressure: 750 W• Consumption: 27 ml/mm• Smoke quantity: 100 m³/mm• Weight: 6.5 kg• Measures: 148 x 316 x 348• Capacity: 1.3 literIncludes:• 1 artificial smoke generator pump• Connection cable and operating mode5415 artificial smoke generator 280.00

LIQUID FOR SMOKE MACHINE

MA 10 521

The liquid is ready for using. It produces a whiteodorless and harmless smoke. It is not flammable,it can’t be mixed with any other product.High quality chemical components of smokewill not deteriorate generators.5 liters smoke generator liquid can 72.00

Check our discontinued products offers, belongingto expositions, without original packaging o simply with

overstock, in our website:

www.salvadorescoda.com



EXTERNAL CLEANING EQUIPMENTS AND PRODUCTSHigh pressure hydro-cleaners

Code Item €

Features: • Voltage: 230 V II • IP 55 protection • Pressure regulation valve • Gun, hose and high pressure pipe • Three axial piston pump

HOBBY SERIES

MA 11 031

• Flow rate: 370 l/h• Pressure: 110 bar• Power: 1.4 kW• Weight: 7.8 kgMod. HOBBY 141/142 185.00

INSTALLER

CLIMA

Accessories included:

PORTABLE SERIES

MA 11 032

• Flow rate: 210 l/h• Adjustable pressure from 5 to 35 bar• Power: 400 W• Weight: 9.5 kg• Includes a transport caseMod. AC-Cleaner TSS-B 553.00

Atomizers for cleaning

Code Item €

MANUAL LEVER

MA 11 021

• Strap for bandoleer• Jet-propelled nozzle• 1.5 m hoseMARI - II 5 liters • 5 liters tank 45.00

Detergent for air conditioner

Code Item €

MA 10 221• To clean filters, evaporators, batteries, fans, etc.CLIMANET detergent (10 kg can) 88.00

Paint stripper kit

Code Item €

MA 11 061

• Contains: 2000 W stripping gun for 480 °C/600 °C temp., including briefcase and accessories

Paint stripper kit 46.50

Gun + HP hose

Extension for lance +nozzle with diffuser

Lance kit with foamtank



137

EXTERNAL CLEANING EQUIPMENT AND PRODUCTSCROD STEAM steam hydro-cleanerThis environment friendly steam cleaner only uses water and does not use any chemical products with the high pressure and high temperatures steam spray technology. The equipment can be applicable to various areas.

SPECIFICATIONS

- Standard voltage: 220-230 V /50-60 Hz.

- Maximum power: 2,300 W.

- Maximum spraying: 4.5 bar.

- Output temperature: 105 °C.

- Amount of sprayed water: 200 ml/min.

- Length of nozzle steam hose: 3 m.

- Weight: 3.75 kg.

- Water tank capacity: 4.7 l.

- Product dimensions (mm): 211 (width) x 345 (long)x 257 (height)

FEATURES

- Ejecting technology at a high pressure and high temperatures.

- Environmentally friendly, it doesn’t need any chemicals and it doesn’t have sterilization effects. It works with high temperatures for cleaning.

- As it uses an instantaneous heating method without using a preheated water generator. There are no risks of explosion and toxic substances outflows.

- You have to adjust water and steam amounts. Three levels: strong, medium and low.

- Anti-heating device. Double bimetal security which adopts the temperature sensor.

- Components:· Remote control.· Brush (large) for general using.· Brush (small) for air conditioner grilles andvery small surfaces.

APPLICATION AREAS:

- Air conditioner cleaning.

- Refrigerator cleaning and defrosting.

- Water purifier and chiller / heater cleaning

- Dirt elimination in toilet and bathroom.

- Car and tires cleaning.

- Dishwasher and sink cleaning.

Code Item €

MA 11 011 CROD STEAMsteam hydro-cleaner 575.00

MA 11 012 Carry case 70.00

Transport bag



EXTERNAL CLEANING EQUIPMENTS AND PRODUCTS Air conditioning cleaners

Code Item €

MA 11 230

• Cleaning• Sanitizing• Eliminates odorsOMNET spray (750 cc) 7.50

MA 11 224MA 11 223MA 11 243

• Used for the cleaning process of air conditioningsystems and circuits. It is also used for the externalcleaning of Splits, internal units, filter cleaning, etc.

• It can be used for the cleaning of all kind of surfacesnot damaged by water

• Atomizer spray

AIRNET bottle of 750 cm³AIRNET atomizer 520 cm³AIRNET bottle of 5 kg

14.0012.2556.00

MA 11 225MA 11 222MA 11 244

• Spray the areas causing the bad odor• In air conditioning equipments, clean the air circuit

with our cleaning product AIRNET, once cleaned,apply AIRPUR spraying until saturation. Switch onthe equipment to distribute the product evenly

• Atomizer spray

AIRPUR bottle of 750 cm³AIRPUR atomizer 520 cm³AIRPUR container of 5 kg

19.2513.9082.00

Integral cleaning systemsCode Item €

T.I.D.A.S. SYSTEM

MA 11 245*MA 11 246*

Tidas system AAC.2 x 600 ml (120 m² duct Ø1.40)Tidas system AAC.2 x 300 ml (60 m² duct Ø1.40)

55.8034.10

MA 11 322 Tidas purifier/acaricide system 2 x 600 ml 40.00

INNER AMBIENT HYGIENIZATION

MA 11 248 Tidas Ambient H. System 2 x 150 ml Sanitizes the environment in rooms and cars. 16.90

* While stock last. MA11245 replaced by MA11322.

Cleaners/DegreasersCode Item €

MA 11 309

MA 11 226

MA 11 310

MA 11 311

MA 11 314

AIR SERNET SUPER 5 liters container 102655superconcentrated cleaner and degreaser.AIR SERNET NORMAL 5 liters container 101995concentrated cleaner and degreaserAIR AC PLUS 5 liters container 101994 foam acidbased cleaner for external batteries.AIR DISLIM 5 liters container 103315 cleaner anddegreaser for cooling facilities.AIR DISLIM 1 liter container 103315 cleaner anddegreaser for cooling facilities.

46.25

40.00

38.50

58.50

15.70

Fast-flush cleaner for internal refrigerationCode Item €

BELNET

The cleaning liquid BELNET is pressurized with CO2in spray cylinders and can be applied directly.It is clean and safe thanks to the special Flushing Gunor by pressing a rubber cone.

HF 18 501HF 18 502HF 18 505

BELNET 600 ml cylinder with rubber coneBELNET 600 ml threaded cylinder (spare units)Cleaning gun with hose

12.0011.0050.00

Tidas system



139

Workshop hand cleanerCode Item €

MA 11 320MA 11 323

With particle entrainment and cosmetics. Apply with dry hands, rub the product well and rinse with plenty of waterESCO-CREM 1 liter cream canESCO-CREM 4 liters cream can

8.1544.00

Hand sanitizer gelCode Item €

MA 11 267MA 11 266

IRINA 100 ml bottleIRINA 500 ml bottle

3.7510.25

Anti-waste pipe odorsCode Item €

MA 11 250 AIRE SANO Waste pipes 8.15

Energetic cleaner for filters and fansCode Item €

HF 18 061

• Removes grease, dust, dirt or tar deposits from electrostatic filters, fans, etc.

FILTER FAN “Vent Cleaner”can with dispenser 24.00

Degreaser without sodaCode Item €

MA 11 238MA 11 239

Special for air grills cleaning of air conditioning systems.Also suitable for air conditioners indoorunits cabinets, boilers, etc.Not aggressive. Biodegradable. Aluminium friendly.Degreaser AC2 750 ml sprayDegreaser AC2 5 liters container

9.6540.50

PlungersCode Item €

FLOW

MA 10 645

Releases all type of clogging due to organic materials. 90% biodegradable500 ml FLOW bottle 8.75

ESCO “CRACK” (PROFESSIONAL)

MA 10 646MA 10 647

Contains a surface-active, non ionic (< 5 %) powerful lime scale remover and oxidant. Specially suitable for organic material in waste pipes1 liter container5 liters container

5.2523.75

DESCAN

MA 11 229

Dissolves organic material (paper, rags, food, cellulose, hair, etc). 98% sulfuric acid concentrated1 liter bottle 8.00

Coil cleanerCode Item €

HF 18 241

• Powerful powder cleaner for coils, evaporatorsand condensers

• Soluble in proportion 6 to 1(0.3 kg are equivalentto 3.8 liters of concentrate)

• Contains a corrosion inhibitor0.3 kg COIL MAX container 21.80

Anti-oxidation fins protectorCode Item €

MA 11 307

Flexible synthetic coating for fins in exchangers.It protects equipment against oxidation in aggressive atmospheric environments like marine environment, dust, acid rain, etc.400 ml aerosol 16.50



DRYING LIQUIDCode Item €

HF 18 031HF 18 032

• It dries all kind of liquids using a chemical reaction for all kind of refrigerants (R-22. R134A, etc.) and lubricants

• Unblock frozen systems with humidity inonly 5 minutes

• Residues free

THAWZONE 28 ml bottleTHAWZONE 116 ml bottle

8.4017.70

ANTI-LIME DESCALING PUMPSCode Item Tank €

«PULCE» DESCALING PUMP

MA 11 199 Mod. PULCE with cycle inverter includedPortable boiler type de-scaler pump.Provided with bag and a leather belt• Weight: 3.5 kg• Max flow: 6 l/min 4 l 635.00

«DOS» DESCALING PUMP

MA 11 201

MA 11 202

Mod. DOS 25 / BOSS 22• 0.25 CV motor at 220 V II• 54 l/min flow (3.24 m³/h)DOS 40 / BOSS 36 model• 0.40 CV motor at 220 V II• 66 l/min flow (3.96 m³/h)

15 l

30 l

558.00

750.00

«DISINEX» ANTI-LIME DESCALING LIQUID

MA 11 211MA 11 212

• For copper and steel• Acid based inhibitor10 l plastic canister D-925 l plastic canister D-9

41.90105.10

«ZINCONEX» ANTI-LIME DESCALING LIQUID

MA 11 203• For copper and steel10 kg powder plastic canister 100.00

MA 11 215

• For aluminium• Biodegradable - Energy-saving10 l plastic canister 142.00

FLV DESCALING LIQUID (no ADR -25%)*

MA 11 217MA 11 218

• For copper and steel• Biodegradable - Energy-saving10 l plastic canister copper/steel FLV (no ADR -25%)25 l plastic canister copper/steel FLV (no ADR -25%)

35.0080.00

FLV ANTI-LIME DESCALING LIQUID (no ADR -25%)*

MA 11 219

• For aluminium• Biodegradable - Energy-saving10 l plastic canister FLV 99.00

ACID NEUTRALIZING LIQUID

MA 11 213• Acid neutralizing liquid10 l plastic canister NEUTRAL 44.20

DESCALING FLUID FOR CIRCUITS

MA 11 227• Anti-scaling for copper and aluminium circuits AC-30 1 liter plastic canister 4.85

TRACAL AX NF INCRUSTATION INHIBITOR

MA 10 648MA 10 649

• For closed circuits1 liter plastic canister5 liters plastic canister

9.2542.50

* ADR -25% are different because they do not required special transport documentation such as harmful material.

DOS

DISINEX

MANTEXZINCK010

FOR ALL

TYPES OF

REFRIGERANTS

BOSS /PULCE

AC-30

TRACAL AX NF



141

AIR COMPRESSORS AND ACCESSORIES«SEMI PROFESSIONAL» series

Code ModelMax. pres.bar

Tankliters

Flowl/min

Pow.CV €

“OIL FREE” PORTABLE SERIES

• OIL FREE piston compressor. No maintenance required• With handle for an easy carrying• Weight: 14 kg• Single-phase 220 V-50 Hz

MA 12 021 CIAO 6/1850 8 6 179 1.5 220.00

“WITH OIL” PORTABLE SERIES

• Single-phase 220 V-50 Hz

MA 12 022MA 12 023

SF2400/25SF2400/50

88

2450

185185

22

245.00335.00

SEALING FOR THREADSCode Item €

«SEAL»TEFLON IN PASTE

SECUREAND EASYASSEMBLY

AA 25 894AA 25 893

• Liquid sealing with a PTFE (Teflon) base for metal thread unions. Ideal to substitute hempor Teflon roll

• Guarantees a perfect joint in water, gas and compressed air

• Working pressure: 25-30 bar• Resistant to vibrations and thermal changes,

keeping its sealing properties in temperaturesfrom -50 to +150 °C.The joint is instant in low pressure, allowingan easy assembly.

• Non-setting compound100 g tube50 g tube

17.5511.22

TEFLON TAPE

ItemLength

(m)Width (mm)

Thickness(mm)

AA 25 901 PTFE tape roll 12 12 0.075 0.50

AA 25 902 PTFE tape roll 12 12 0.1 0.65

AA 25 905 PTFE tape roll 50 19 0.1 4.50

AA 25 906 PTFE tape roll 50 25 0.1 10.69

«TWINE-SEAL 240»REEL TEFLON STRING

AA 25 909

• PTFE (Teflon) sealing for water, oil, vapor, gas, etc. installations.

• Does not melt, get dirty, harden or is flammable• Functional stability from -200 °C to +240 °C• Maximum working pressure: 100 bar175 meters coil

29.30

BURLAP ROLL

AA 25 881

• Continuous and ready-to-useburlap roll for sealing threads

Burlap roll 5.85

Discounts

VALVING

Catalogue

AA-25

CIAO 6/1850

SF2400/25



JOINT SEALANTCode Item €

HF 18 232HF 18 233HF 18 231

• Sealing for all the refrigerant, gases, steam, air,water, etc.

• Temperature from -93 °C to 200 °C• Flexible adjusting compound, it sticks on internal

surfaces filling in hollowsLEAK LOCK 38 g jarLEAK LOCK 118 g jar with brushLEAK LOCK 460 g jar with brush

10.0026.8068.00

EPOXY-VULCANIZED ADHESIVE SEALINGCode Item €

HF 18 295

RedEpoxy is a two parts epoxy-vulcanized kit with high performance and temperature resistance. It is used for uniting or sealing all metals, including aluminium and rigid plastics. RedEpoxy has successfully repaired aluminium evaporators, heating coils, hot water heater tanks, pipes, tanks, etc.• RedEpoxy is specifically designed to exhibit a distinct

color change when heat cured• Can be used with a hot-air gun or propane torch• A vulcanization is achieved in few minutes and the

device is immediately ready to use• Temperature:

-73 °C to 149 °C• Tensile strength: 200 bar• Working pressure:

higher than 200 barKit contains 2 tubes (14 g each one) 28.90

INSPECTION CHAMBER DUCTS AND MACHINERYCode Model €

HF 16 101

• It allows to see the inner state of air ducts bymeans of an air Ø18 mm drill, it has viewalso to the chamber and also hardly reachableareas, etc.

• 2.4" LCD screen• 900 mm flexible wire• Ø17 mm aluminium camera head• Video output• 180° image rotation• Equipped with caseSEE SNAKE 199.00

MAGNIFYING GLASS WITH LED ILLUMINATIONCode Model €

MA 15 030

• 40X magnification• LED lighting incorporated• Viewer with subdivisions of 0.5 mm• Resistant glass optical lens• Dimensions: 180 x 60 x 49 mm• Case includedVISION TOOL 66.50



143

LIFTS

C700 Series

Code ModelHeight (m) Max.

loadkg

Deviceweight

kg€

Min. Max.

MA 14 151 C-711 1.45 3.65 130 23 625.00

MA 14 152 C-712 1.66 4.72 130 34 900.00

ACCESSORIES

MA 14 155 C711/712 wheels kit 78.00

C800 Series

Code ModelMax. height (m) Max.

loadkg

Deviceweight

kg€

Normal Inverted

MA 14 161 C-800 3.33 4.00 160 70 1,390.00

Composed by:

- Telescopic system of three sections, two of them operated by steel cable, guided by pulleys.

- Manual winch of 350 kg maximum load with automatic brake of load holding. However, it is not recommended to carryover 130 kg.

- Rustproof protection and painted in martelé color.

- Non-slip brackets.

Composed by:

- Winch of 500 kg maximum loadwith automatic brake of load holding. Minimum working load: 25 kg.

- Extensible legs to support the tower with wheels. The legs can be placedin parallel to the chassis for their transport.

- Wheels to move the wheelbarrow.

- Handles to take the wheelbarrow easily.

- Coated with Zinc, anti-rust protectionand hammer effect paint.

Features:

- Maximum height: 3330 mm.With blades in normal position.

- Maximum height: 4000 mm.With inverted blades.

- Minimum height: 2120 mm.

- Weight: 70 kg.

- Width: 650 mm.

- Maximum liftable load: 160 kg.

Foldeddevice

C700 Series

C800 Series



LIFTSSeries 2100

- At heights of 4.0 - 5.6 and 7.3 meters.

- Capacity of 300 kg.

- Side stabilizers.

- Standard arms.

- Compact design.

STABILIZER FEET

In order to increase stability it can be supplied with optional stabilizing feet. Mounted on the base, foldable, it is a big help for the elevator to staying firm on the ground.

Each one of the folding legs is provided with a 12.7 cm long bolt that facilitates the movement of the elevator when it is loaded.

TECHNICAL FEATURES

Model 2112 2118 2124

Height cm 213.4 213.4 213.4

Length at rest position cm 86.4 86.4 86.4

Length during operation cm 157.5 184.4 185.4

Base width cm 79.4 79.4 79.4

Width with lateral stabilizers unfolded cm 188 188 188

Space to the ground cm 6.4 6.4 6.4

Load (minimum height) cm 15.2 15.2 15.2

Maximum height (clevis down) m 3.4 5.1 6.7

Width standard forks cm 54.6 54.6 54.6

Length clevis standard cm 71.1 71.1 71.1

Net weight kg 114.5 146 166

Centered load kg 300 300 300

Load with extended clevis kg 90 90 90

Arm length with extended forks cm 106.7 106.7 106.7

Code Model Max. Load (kg)

Max. Height (m) €

SUMNER LIFT Model

MA 14 221MA 14 222MA 14 223

LIFT 2112LIFT 2118LIFT 2124

300300300

3.45.06.7

3,640.004,515.004,860.00

MA 14 231Accessories:Side Stabilizers (Model LIFT 2112) 300.00

Reversible forks

Compact folding



145

ELECTRIC LIFTCM seriesThe portable lift of the series CM is the device that installs, places and raises any heavy load.

- Telescopic stick solid aluminium treated with heat, when warm, solid, reliable and safe.

- No tools needed for installation. The legs can be folded and unfolded immediately without tools.

- 4 telescopic legs, versatile and adjustable without limits. It can be used on an irregular surface or like stairs.

- Electronic remote control with variable speed control switch. The switch can start softly or it can be adjusted using the micro height operation.

- Emergency stop key. Push the key to immediately stop the device going up/down.

- Manual mode: the portable lift is designed to operatemanually in case ofa failure of the electric supply.

- It is equipped with automatic brake to avoid the overload.

- The level in the mast ensures correct installation while the telescopic legs are being mounted.

- Special design of the platform to install air conditioning.

- Completely portable. Its portable design makes it easier to transport.

- Its special design allows it to work very close to the wall.

- CM 520 has additional wheels for CM 340.

Code ModelHeight (m) Load capacity

(Kg)Weight

(Kg) €Basic Height

MA 14 141 CM-340 0.97 3.3130 kg to 3 m

120 kg to 3.3 m21 1,675.00

MA 14 145 CM-340 wheels set (accessory) 88.00

MA 14 142 CM-520 1.12 4.9140 kg to 2.8 m130 kg to 4 m90 kg to 4.9 m

38 2,400.00

Foldeddevice



CARTCode Item €

FOLDING TRANSPORT CART

MA 14 118

• Load capacity: 90 kg• Surface of charge: 350 x 240 mm• Ø150 mm wheels• Min. height: 730 mm• Max. height: 1.090 mmFolding cart 83.00

HANDCART

MA 14 113

• Load capacity: 200 kg• Ø24.5 x 8.5 mm pneumatic tyres• Weight: 10 kgHandcart 83.00

METAL DETECTORSCode Model €

MA 15 020 Mod. DM10• 12 cm submersible detecting sensor• Sound indicator• Power supply: 9 V battery• Weight: 210 g• Carrying case 45.00

MA 15 025 Mod. DM30• High sensitivity (Coins from 10 cm to 60 mm)• Sound and vibration indicator, LED light• Dimensions: 420 x 80 x 40• Power supply: 9 V battery• Weight: 430 g• Carrying case 75.00

SERVICE MIRRORCode Model €

HF 16 001HF 16 009

5 articulated positions. Double joint telescopicMod. MIR - 1 circular Ø 40 mm.Mod. MIR - 5 oval shaped Ø 32 x 50

7.508.95

HF 16 011 Mod. FLM-1 Ø 50 mm oval shaped• 45 mm length, with flexible handle and LIGHT• Operates with 1.5 V batteries (not included) 34.00

TELESCOPIC MAGNETIZED FLASHLIGHT WITH MIRRORCode Model €

HF 16 012 Telescopic length: 160 to 530 mm. 4 kg powerful magnet. 3 LED flashlight. Batteries: 4xLR44. 210° adjustable flexible neck. Ø38 mirror 40.00

TELESCOPIC MAGNETIZED BARCode Model €

HF 16 022Length (close): 126 mm. Length (open): 637 mmMod. BT503 7.50

TELESCOPIC MAGNETIZED FLASHLIGHTCode Model €

MA 30 129 Telescopic length: 170 to 550 mm. 4 kg powerfulmagnet. 3 LED flashlight. Batteries: 4 x LR44. 210° adjustable flexible neck. 32.00

Handcart

Foldable device

DM10

DM30

FLM-1

Telescopic flashlight with

mirror

MIR-1

BT503

Telescopicflashlight



147

OIL ANALYSERSOil identifier

Code Model €HF 18 304 OIL-ID type

• Identifies in a few seconds the oil typefor the installation(POE or another)

• Individual single-dose bottle 25.00

Acidity checker

Code Model Oil type €• Checks the installation acidity degree• Individual single dose bottle

ACIDITY CHECKER ACID DETECTORHF 18 303 ACID DETECTOR MINERAL oil 16.50HF 18 302 ACID DETECTOR ESTER-POE oil 18.40

KMP ACIDITY CHECKERHF 18 003 • KMP analyzer kit TKO type Mineral 20.60HF 18 005 • KMP analyzer kit ETK type Synthetic 28.30

“UNIVERSAL” acidity analyzer

Code Item €

HF 18 006

• Suitable for all oil types (mineral, polyester...)• Indication by color changeACID TEST can with 4 completed tests 29.95

Acidity, moisture and conductivity test case

Code Item €HF 18 025 CHECKMATE (supplied in complete case)

• Suitable for ALL types of oil: mineral, ester, PAG, etc.• Easy removal from the closed circuit• SAE 1/4 thread connections 440.00

HF 18 026HF 18 027HF 18 028

Set of 3 spare tubes acidSet of 3 spare tubes moistureSet of 3 spare tubes conductivity

71.0071.0071.00

“PRIMERS” LEAK SEALERCode Item €

ACR SUPER SEALHF 18 235 For refrigerant loads from 54 g to 1.82 kg

and minimum oil load of 284 ml.Power up to 5.3 kW. Ref. KIT 947 84.00

HVACR SUPER SEALHF 18 236 For minimum refrigerant loads of 1.82 kg

and minimum oil load of 887 ml. Power from 5.3 kW to 17.6 kW. Ref. KIT 944 108.00

SUPER SEAL PROHF 18 237 Special for R134a circuits (Self-propulsion).

Includes bend and disposable connector 74.00VALVES FOR SUPER SEAL

HF 18 240 Valve for tube opening and adjustment to vacuum pump 14.50CLIMA STOP

HF 18 261 30 ml can to install maximum 1 kg gas cooling or one split system 90.00

HF 18 262 42 ml can to install cooling or multisplit up to 1.5 kgof gas 98.00

HF 18 263 60 ml can to install cooling up to 3 kg of gas 124.00

FOR ALL

TYPESOF OILS

Includes 1/4" SAE and 5/16" SAE adapter

FOR ALL

TYPESOF OILS



QUICK SERVICE KITS

Acid neutralizer- Keep the acid away. - Easy to use, non complicated charts.- Compatible with ALL refrigerants and lubricants.- Neutralizes acid in recovery equipment.- Safe, will not damage system components.

Code Model €

HF 18 014 Acid neutralizer 92.50

Leak repair- All-In-One- Quick sealing, small leak repair.- Lubricator.- Conditioner. - Multiple leaks sealing.- UV dye to reveal larger leaks needing repair.

Code Model €

HF 18 260 Leak repair 139.00

Liquid dehydrator- Frees a frozen system in few minutes.- The original dehydrating agent to control moisture

in refrigeration systems.- Safe and non-poisonous.- New formulation without methanol.- Biodegradable, non-polluting.

Code Model €

HF 18 030 Liquid dehydrator 78.75

Leak detector- With Superbrite UV fluorescent tracer.- Work under all conditions.- Not affected by noise nor wind.- Visible under bright and ultraviolet light.- For refrigeration, air conditioning and hydraulic systems.

Code Model €

HF 18 220 Leak detector 100.00

LEAK SEALERCode Material €

HF 18 265

EXTREME locates the refrigerant leak and seals permanently without any reaction with humidity or oxygen. EXTREME repairs leaks with a maximum dimension of 0.5 mm.30 ml container with adapter of 1/4" and 5/16" 55.00

INTERNAL DETECTOR OFREFRIGERANT LEAKS

KITS INCLUDE: Plastic dispenser with liquid, 300 mm hose and 1/4"

SAE ball valve



149

ACIDITY NEUTRALIZER FOR COMPRESSORSCode Material €

ACID NEUTRALIZER

HF 18 015 • Eliminates acidity from recovery equipments(burnt compressor)

• Compatible with all types of oils (mineral/ester)• Compatible with all types of refrigerant gases• Does not harm any components 42.00

ACID AWAY

HF 18 300HF 18 301

• Eliminates residual acidity• Preventive acidity maintenanceACID AWAY MINERAL oilACID AWAY ESTER oil

42.0047.25

WORK SPOTLIGHTSCode Item €

PORTABLE HALOGEN SPOTLIGHT

HF 20 001 • Power: 500 W• Floor support and carrying handle•1.5 m wire with socket 30.00

FOOT WITH HALOGEN SPOTLIGHT

HF 20 005HF 20 006HF 20 011

• Ideal for construction works, with enlargeable footand telescopic mast

• Includes 3 m wire with socket.1 spotlight 500 W2 spotlights 500 + 500 W500 W spare light

65.0085.004.25

WORK PORTABLE SPOTLIGHTSCode Item €

HF 20 021 • Portable spotlight with bulb protection and hook• 10 m wire with socket 17.50

HEAD SPOTLIGHTCode Item €

MA 30 128 • 60 Lumens• Range: 50 m• 3 batteries (not included) 6.05

WIRE ROLLERCode Item €

HF 20 101HF 20 102

• 3 x 1.5 mm wire section• Thermal protection• Carrying handle• Max. 16 A (3000 W)25 m roller50 m roller

80.00140.00

Portable

Footwith lamp

FOR ALL

TYPESOF OILS



VACUUM CLEANERSCode Model €

VACUUM CLEANER FOR DUST

MA 22 001

MA 22 101

ASTRO 100• Power: 1,000 W 220 V II• 15 l stainless steel tray• Complete Ø 36 accessory kitASTRO 100 bag

420.0045.00

MA 22 003

MA 22 102

ASTRO 110• Power: 1,100 W 220 V II• 20 l stainless steel tray• Complete Ø 40 accessory kitASTRO 110 bag

520.0052.00

MA 22 005

MA 22 103

ASTRO 220• Power: 2 motors of 1,100 W• 50 l stainless steel tray• Ø 40 accessory kitASTRO 220/330 bag

950.0070.00

MA 22 007

MA 22 103

ASTRO 330• Power: 3 motors of 1,100 W• 50 l stainless steel tray• Ø 40 accessory kitASTRO 220/330 bag

1,075.0070.00

PORTABLE VACUUM CLEANERS

MA 22 030 Mod. CHIMECO OM• Cleaner to use in vacuum, dry and wet• Power: 800 W 230 V II• Max. absorption: 16 kPa• Capacity: 10 liters• Weight: 5.8 kg 125.00

MA 22 038 Mod. CHIMECO OM• Cleaner to use in vacuum, dry and wet• Power: 1000W 230 V II• Max. absorption: 16 kPa• Capacity: 8 liters• Weight: 5.8 kg 130.00

MA 22 029 10 spare “Chimeco” bags pack 38.00

VACUUM CLEANER - HAND BLOWER

MA 22 025 Mod. SHB-530B• Power: 530 W to 230 V II• Weight: 1,700 g• Flow rate: 2.7 m³/min• Pressure: 560 mm WCLM• Length: 405 mm 100.00

MA 22 026 SHB-530 B spare bag 9.00

ASTRO

CHIMECO

SHB-530B



151

LEVELS, MEASURING TAPE CALCULATORS, SQUARESCode Item €

LEVELS

MA 20 001MA 20 005

Magnetic base level. Length: 225 mmMagnetic base level. Length: 500 mm

3.5021.20

SQUARES

AI 52 140 Dimension: 300 mm 3.91

MEASURING TAPES

AI 52 172AI 52 173

3 meters5 meters

3.004.75

“HQ” MAGNETIC MEASURING TAPE

MA 15 132MA 15 140

• Printed scale on both sides• Magnets with insurmountable traction force, one holds

the hook in front for specific measures and the other one located below the tape in order to facilitate the pipe measures or metal profiles.

• Length: 5 meters• Length: 8 meters

31.6538.47

GRINDING MACHINECode Model €

STANDARD GRINDING MACHINE

• 3 nozzles 3, 4 and 5 mm• Protection acetate handle• Aluminium rivet: 3.0 - 3.2 - 4.0 - 4.8• Steel rivet: 3.0 - 3.2 - 4.0 - 4.8• Stainless rivet: 3.0 - 3.2 - 4.0

MA 04 021 PROFESSIONAL grinding machine model 26.00

PROFESSIONAL GRINDING MACHINE

• 3 nozzles 3, 4 and 5 mm• Protection acetate handle• Revolving head• Aluminium rivet: 3.0 - 3.2 - 4.0 - 4.8• Steel rivet: 3.0 - 3.2 - 4.0 - 4.8• Stainless rivet: 3.0 - 3.2 - 4.0

MA 04 022 PROFESSIONAL grinding machine 52.60

METAL SHEET HAND CUTTERCode Model €

METAL SHEET HAND CUTTER

MA 17 001

MA 17 007

MA 17 009

MA 17 101

Mod. M - 1RLeft curved or straight cuts

Mod. M - 6RTo the right (up to 1.5 mm)

Mod. M - 7RTo the right (up to 1.5 mm)

Mod. MT - 3372510" metal sheet scissors

20.00

20.00

20.00

20.60

Magnets detail



ELECTRIC TOOLS BRICODrills

Code Model €

760 W HAMMER DRILL

MA 17 333

• Ø13 mm automatic mandrel• DRILL and HAMMER functions• 0-3000 rpm variable speed• Reversible• Adjustable handle• 230 V-50 Hz760 W DRILL HAMMER 58.00

1200W HAMMER DRILL

MA 17 334

• Ø13 mm automatic mandrel• DRILL and HAMMER functions• 0-1000 rpm/0-3000 rpm speed selector• Reversible• Adjustable handle• 230 V-50 Hz1200 W DRILL HAMMER 112.00

Grinding machine

Code Model €

500 W MINI GRINDING MACHINE

MA 17 321

• For dials up to Ø115 mm• Tension: 230 V-50 Hz• Blocking key500 W MINI GRINDING MACHINE 37.00

900W MINI GRINDING MACHINE

MA 17 322MA 17 323

• For dials up to Ø115 mm• Reinforced switch• Blocking button to change quick disc• LED warning wearing of brush• 3 positions handle• Aluminium head• 11,000 rpm• 220/240 V - 50/60 Hz900 W MINI GRINDING MACHINEØ115 spare disc

62.005.00

Drill battery with case

Code Item €

PORTABLE DRILL WITH BATTERY

MA 17 301 • 18 V battery• Revolutions from 0 to 900 rpm• 10 mm automatic mandrel• Load from 3 to 5 hours• Weight: 1.7 kg• Includes: 6 bits, 6 drills and adapter• Supplied in a plastic case 87.00

MA 17 303ACCESSORIES:18 V spare battery 35.00



153

POWER TOOLSDrill

Code Model €

12 V HAMMER DRILL WITHOUT BRUSH

MA 15 401

• POWERSTATETM motor without brush designedand built by Milwaukee. 10 times more lasting,twice more power and twice more autonomy

• REDLITHIUM-IONTM battery provides twice more autonomy, 20% more power, twice better durabilityand this technology allows working with extreme temperatures up to -20 °C

• 13 mm metallic drill chuck of quick closure: allowsthe quick change of tool and maximum durability

• Charge status indicator

INCLUDES:2 batteries, charger and Kitbox case

M12 CP - 402C 491.67

18V HAMMER DRILL WITHOUT BRUSH

MA 15 403

• The more compact hammer drill of its class with only 187 mm

• Brushless motor up to 50% more efficient and twice more lasting

• 60 Nm. of couple, the higher strength by size• Totally metallic box of gear and automatic

metallic drill chuck of 13 mm for a quick changeof the accessory

• Optimized velocity for quick drilling and screwing(0 - 450 / 0 - 1800 rpm)

• Battery charge indicator• 3 modes selector which allows the user to quickly

choose between percussion, rotation and screwing


M18 BLDP - 502C 665.00

Reciprocating saw

Code Model €

MA 15 402

• The Hack Saw reciprocating saw by Milwaukee a280 mm length. Ideal for working in confined areas

• Milwaukee FIXTEC patented system with quick change and blades without wrench

• Low vibration level of 10.5 m/s2

• Charge indicator and integrated LED light• REDLITHIUM-IONTM battery provides twice more

autonomy, 20% more power, twice better durabilityand this technology allows working with extreme temperatures up to -20 °C


C12 HZ - 0202 416.67



POWER TOOLS

Grinding machine

Code Model €

ANGLE GRINDER

MA 15 406

• 800 W powerful motor for multipleapplications and only 2.0 kg weight to ensurea prolonged use

• Compact and slim design with a good grid of only194 mm diameter for a more comfortable gripping

• Metallic and durable gear case• Air inlets protected to improve the cooling• Compact and smooth metallic head for an excellent

visibility of the working place, optimized cut depthand to work in confined areas

• 115 mm diameter disc

AG800 - 115E 101.50

Ø115 DISCS

MA 15 543

MA 15 541

MA 15 542

PRO SCS 41/115 (Metals / Steel)

DU115 DIAMOND (General work)

DUH115 DIAMOND (Hard material)

2.15

13.75

35.75

Hammers

Code Model €

3 MODES HAMMER - 26mm

MA 15 405

• The more compact and the smoother hammer of its class

• 13.5 m/s2 low vibration level• Great durability thanks to the technology of integrated

metallic lock system• Patented system to reduce the weight• Impact stop - for drilling functions in wood or metal• Safety clutch to protect the user and the device

if the bit get stuck• 4 meters cable

INCLUDES:Kitbox case

PH26 SDS PLUS 275.00



155

DIGITAL THERMOMETERSCode Item €

DIGI-THERMO

• Resolution: 0.1 °C• Accuracy: ±1 °C• MAX-MIN registered temperatures indication• MAX-MIN configurable acoustic alarms• Stainless probe. Length: 100 mm. With 1 m wire• Includes multi-use clip and table support• Measurement unit selection C/F• Power supply: 1 battery AAA 1.5 V

IM 12 104 DIGI-THERMO (immersion) -50 / +300 °C 20.40

«DELTATRAK» POCKET THERMOMETER

IM 12 106 Mod. HVACR• Range: -40 to +150 °C• Resolution: 0.1 °C• Accuracy: ±1 °C• Hold• Stainless probe. Length: 89 mm• With probe cover, magnet and velcro• Auto shut off• Power supply: 1.5 V battery

37.40

SOLAR-THERMO

IM 12 103

• Works on solar power• Always operational: backup battery for measurements

with light level inferior to 70 lux• 180° rotative head• Range: -50 to 150 °C• Resolution: 0.1 °C• Accuracy: ± 1 °C• Stainless probe. Length: 115 mm• Protecting case with holding clip• Dimensions: 173 x 43 x 23 mm• Weight: 27 gSOLAR-THERMO 19.00

«ALL IN ONE» POCKET THERMOMETER

IM 12 109 Mod. HBK-115• Range: -50 to +150 °C. Resolution: 0.1 °C• Accuracy: ±1° C ±1% v.m. (-20 to +150 °C) ±2 °C ±1% v.m. (otherwise)• 130 mm probe (portable and adjustable to

45°, 90°, 135° and 180°)• With memory to hold 10 readings• Min-Max function• Programmable beeper• Auto power on /off simply unfolding and

folding the probe• Safety cord• Battery: 1.5 V cell• Dimensions: 153 x 49 x 20 mm 81.40

WALL THERMOMETER WITH SUCTION CUP

IM 12 121

IM 12 122

• Range: -20 to +50 °C• Resolution: 0.1 °C• Power supply: 2 x AG13 button cells (1.5 V)• Applications: windows, ceiling, cars, boards, etc.TERMO-STICK INSIDEFront sight on board or glassTERMO-STICK OUTSIDEFront sight through glass

7.50

7.50

DIGI-THERMO

HVACR

SOLAR-THERMO

HBK-115

INDOOR TERMO-STICK

OUTDOOR TERMO-STICK



DIGITAL THERMOMETERSCode Item €

«TESTO 925N» DIGITALTHERMOMETER

IM 12 335

• Range: -50 to 1000 °C• Resolution: 0.1 °C (-50 to 199.9 °C)

1 °C rest range• Accuracy: ± (0.5 °C + 0.3 % v.m) (-40 to 900 °C)

± (0.7 °C + 0.5 % v.m) (rest range)• Probe: Thermocouple type “K”• Connection of the sensor by radio waves with optional module• Printing function optional.• Functions of MIN - MAX - HOLD• Programmable beeper• Display with light• Power supply : 1 LR-61 9 V battery• Dimensions: 182 x 64 x 40 mmTESTO 925 N without probes 97.78

IM 12 338IM 12 339IM 12 340

PROBES WITH CABLE– Probe immersion: -60 to 400 °C (fig. 1)– Air probe: -60 to 400 °C (fig. 2)– Surface probe: -60 to 400 °C (fig. 3)

42.2260.0060.00

IM 11 447PRINTERIRDA infrared printer 303.41

IM 12 361IM 12 362IM 12 363

ACCESSORIESSmall caseBig case (unit + probes + accessories)Top safe case

28.8942.2228.89

MULTIFUNCTION PROFESSIONAL CLASSTHERMOMETER WITH TWO PROBES

IM 12 401 Mod. HBK-16• Range: -200 to +1270 °C• Resolution: 0.1 °C. Accuracy: ±0.05 %• Triple display (T1 + T2 + clock)• Incorporated clock to check processes

(Hour and Min. / Min. and sec.)• Max. and Min. and average• Max. and Min. alarms• Reading retention• Suitable for K and J thermocouples• Includes:

– 2 probes with 1 m thermocouple cable from -40 to +150 °C (environment, contact, etc.)

– Rubber protection 315.90

IM 12 338IM 12 339IM 12 340IM 12 405IM 12 406

OPTIONAL PROBES– Probe immersion: -60 to 400 °C (fig. 1)– Air probe: -60 to 400 °C (fig. 2)– Surface probe: -60 to 400 °C (fig. 3)– Probe with 1 m thermocouple cable: -40 to 150 °C (fig. 4)– Probe with 1 m thermocouple cable: -40 to 600 °C (fig. 5)

42.2260.0060.0037.9069.00

TESTO 925N

HBK-16

1

1

2

2

3

3

IrDAPrinter

4

5



157

INFRARED DIGITAL THERMOMETERSCode Item €

POCKET INFRARED THERMOMETER

IM 12 166 Mod. TI10• Range: -33 to +220 °C• Resolution: 0.1 °C / Accuracy: ± 0.6 °C• 1:1 optical relation• Emission range: 0.05 to 1.00• MAX-MIN temperatures indication• Power supply: 1 CR2032 unit• Dimensions: 18 x 37 x 68 mm• Weight: 65 g, including battery• Rigid aluminium case 44.00

POCKET INFRARED THERMOMETER WITH LASER POINTER

IM 12 167 Mod. TI20• Range: -55 to +250 °C• Resolution: 0.1 °C / Accuracy: ± 0.1 °C• 6:1 optical relation• Emission range: 0.05 to 1.00• MAX-MIN temperatures indication• Laser pointer• Power supply: 2 CR2032 units• Dimensions: 22.5 x 50 x 103 mm• Weight: 32 g, including battery• Rigid aluminium case 66.00

INFRARED/AMBIENT THERMOMETER WITH LASER POINTER

IM 12 155 Mod. TESTO 810 - Pocket Series• Range (IR probe): -30 to +300 °C• Accuracy: ± 2 °C (-30 °C...+100 °C) / ± 2 % v.m.

(rest range)• Resolution: 0.1 °C• Range (NTC, ambient temp.): -10 to 50 °C• Accuracy: ± 0.5 °C / Resolution: 0.1 °C• Dimensions: 119 x 46 x 25 mm• Adjustable emissivity• 6:1 optical relation• Shows differential temperature• Hold / Max. / Min. function• Auto switch-off• Backlit display• Includes: protection cover, wrist strap, belt case,

batteries and calibration protocol 83.00

INFRARED THERMOMETER WITH LASER POINTER

IM 12 170 Mod. TI30• Backlit display• Range: -20 to +537 °C• Resolution: 0.1 °C / Accuracy: ± 1 °C• 12:1 optical relation• Emission range: 0.95• MAX-MIN temperatures indication• Laser pointer• Power supply: 9 V 6F22• Dimensions: 162 x 56 x 190 mm• Transport case 145.00

TI10

TI20

Testo 810

TI30



INFRARED DIGITAL THERMOMETERSCode Item €

INFRARED THERMOMETER LONG DISTANCEWITH LASER POINTER

IM 12 175 Mod. TI40• Backlit LCD display• Range: -50 to +1000 °C• Resolution: 0.1 °C / Accuracy: 1.5 %• 50:1 optical relation• Adjustable emissivity: 0.10 to 1.0• Acoustic alarm (high/low)• MIN-MAX-AVG-∆T• Laser pointer• °C/°F switch• Power supply: 9 V batteries• Dimensions: 100 x 56 x 230 mm• Transport case 275.00

THERMAL CAMERASCode Item €

THERMAL CAMERAFOR SMARTPHONE

IM 12 240IM 12 241

Compact thermal device which allows to see and measure subtle temperature changes. With two independent models for IOS and Android, it connects to Smartphones and tablets through micro USB (Android) or Lightning connector (IOS) showing thermal images on the device screen and allowinga further analysis through FLIR TOOLS.

MSX function: improves multispectral vision.

Applications: Energy efficiency, maintaining, industry, air conditioning, isolation, health, plumbing, electricity, construction, safety, outdoor activities, etc.

Technical features:• Temperature range: -20 to 120 °C• Thermal resolution: 160 x 120 pixels• Image file format: Radiometric JPEG, MPEG-4 video• Color palette: 7:

grey (hot, white), rainbow, lava...• Built-in battery :

1 hour duration, 40 min charging• Dimensions and weight:

65 x 29 x 18 mm, 32 g

FLIR ONE for IOS devicesFLIR ONE for ANDROID devices

289.00289.00

TI40

Global leader inthermographic cameras

Thermal image of an embedded pipe



159

THERMAL CAMERASCode Item €

POCKET-SIZED THERMAL CAMERA

IM 12 220

The first pocket-sized thermal camera in the world. Always carry it with you as an essential tool to locate: pipes, leaks, jams, overheating, defective insulation,air pockets, holes in walls, air infiltrations, etc.• Function: MSX• Touch screen 3"• Range: -10/150 °C• Accuracy: ± 2 °C or 2 %, the highest• IR resolution: 80 x 60 (4800 measure pixels)• Thermal sensitivity: < 0.10 °C• Built-in working light and flash• Internal memory for 500 sets of images• Dimensions: 125 x 80 x 24 mm. Weight: 130 g• Image file format: Standard JPEG• Rechargeable lithium-ion battery (2 hours)• Connectivity: USB Micro-B connector. Data transfer

to and from PC (Windows), IOS and Android• Automatic power offIncludes: Security lanyard, USB cable, power supply charger, getting started guide, FLIR-TOOLS software professionalFLIR C2 873.75

ANEMOMETERSCode Item €

MULTIFUNTION ANEMOMETER FOR SMARTPHONE

• By downloading a free App you can measurestemp., humidity, air speed and dew point throughyour Smartphone

• Save your reports and share them via email, Internet, Facebook or Twitter.The device will also generate a graphic and will showa map with the exact location where the measurement was made.

Compatibility: IOS and Android (from 4.3 version)

IM 13 002 W2: Thermometer + Hygrometer + Anemometer 120.00

PRODUCTGUARANTEE

PRODUCTGUARANTEE

* By registering your FLIR product at www.flir.com

YEARS

YEARS

Global leader inthermographic cameras

Blocked pipe

Underfloor heating

MSX FUNCTION: FLIR patented multispectral

improvement that adds recognizable details to thermal

imaging.

Conditioning

Measuring range Min. Max. Accuracy Resolution Measuring

units

Temperature -25 °C 60 °C ±0.3 °C ±0.1 °C °C, °F

Humidity 5% RH 95% RH ± 4 % RH ± 0.1 % RH %RH

Airspeed 0.85 m/s 40 m/s ±2% ±0.1 m/s

km/h, m/s, fps, mph, knots, Bft




«TESTO 405-N» POCKETANEMOMETER-THERMOMETER

IM 13 066 TESTO 405-N Pocket series• Ranges: -20 / +50 °C

0 - 5 m/sec (-20 to 0 °C)0 - 10 m/sec (0 to 50 °C)0 - 99.990 m³/h

• Flow measure in m³/h, introducing the area• Resolution: 0.01 m/sec / 0.1 °C• Accuracy: ± 5 % v.m. / ± 0.5 °C• Probe: Ø16 mm extensible. 300 mm total length• Includes multi-use clip and duct support 125.56

«KESTREL»MICRO-ANEMOMETER

IM 13 010 K1000 (Anemometer)• Dimensions: 122 x 42 x 18 mm• Weight with cover: 100 g• Range: 0.3 to 40 m/sec• Resolution: 0.1• Accuracy: ± 3% v.m.• Indication of max. and average speed• Shock proof cover with safety strap• High accuracy replaceable impeller Ø25 mm• IP 67 water-proof• Measure units: m/s, km/h, Mph, Ft/min, knots• Power supply: CR2032 battery 120.00

IM 13 011 K2000 (Anemometer + Thermometer)The same as K1000 plus:• Temperature indication:

– Range: -20 to 60 °C– Accuracy: ± 1 °C– Resolution: 0.1 °C

• Wind chill equivalent temperature155.00

IM 13 012 K3000 (Anemometer + Thermometer)The same as K2000 plus:• Relative humidity indication:

– Range: 5 - 95% R.H.– Accuracy: ± 3 %– Resolution: 1%

• Indication of the temp. equivalent to humidity degree• Indication of the dew point 235.00

Automatic calculation of the equivalent temperature to the cooling by the wind

If on a day with wind of 12 m/sthe air temperature is 7 °C,

the thermal sensation is -6 °C

7 ° C + wind 12 m / s = -6 °C

Automatic calculation of the equivalent temperature according

to the degree of humidity.A higher degree of humidity in the

environment makes a higher thermal sensation such as:

26,3 °C + 66% RH= 28,5 °C

Testo 405-N



161


«TESTO 435-1 N»MULTIFUNCTION ANEMOMETER

IM 13 043

• Ranges: look at probes• Resolution: 0.01 m/sec - 0.1 m/sec - 0.1 °C

0.1% RH - 1 ppm / 0.1 hPa• Measure of air speed, air flow, humidity, temperature,

CO2, absolute pressure• Probes connection by radio waves with optional module• Measured values printing with optional printer• MIN - MAX - HOLD functions• Average of values by point and time• Automatic switch-off• Display with light• Power supply : 3 AAA 1.5 V battery• Dimensions: 220 x 74 x 46 mmTESTO 435-1 N (without probes) 545.33

IM 13 047IM 13 048IM 13 051IM 12 338IM 12 339IM 12 340

PROBES WITH CABLE• Vane probe: 0.6 to 40 m/s diam. 16 mm (fig. 6)• Vane probe: 0.25 to 20 m/s diam. 60 mm (fig. 7)• Hot wire probe: 0 to 20 m/s diam. 7.5 mm (fig. 8)• Vane probe: -60 to 400 °C (fig. 1)• Air probe: -60 to 400 °C (fig. 2)• Surface probe: -60 to 400 °C (fig. 3)

528.88531.10331.1142.2260.0060.00


IM 13 058ACCESSORIESCase 103.32

IMPORTANT: Add the probe stem to the anemometer.

«TESTO 425 N»ANEMOMETER -THERMOMETER

IM 13 062

• Range: 0 to 20 m/sec / -20 to 70 °C• Resolution: 0.01 m/sec / 0.1 °C• Accuracy: ± (0.03 m/s + 5% v.m) / ± 0.5 °C (0 to 60 °C)

± 0.7 °C (rest range)• Hot wire telescopic probe• Speed, temperature and air flow measure• Measured values printing with optional printer• MIN - MAX - HOLD functions• Average of values by point and time• Automatic switch-off• Display with light• Power supply : 1 LR-61 9 V battery• Dimensions: 182 x 64 x 40 mmTESTO 425 N 451.11



TESTO 435-1 N

IrDAPrinter

TESTO 425N

6 7 8 1 2 3



ANEMOMETER-THERMOMETERCode Item €

«DCFM-8901» DIGITAL METERTEMPERATURE / SPEED / FLOW

IM 13 151 DCFM-8901 digital meter• Ranges: – Speed: 0.4 to 25 m/sec

– Temperature: -10 to 50 °C• Resolution: 0,1 m/sec / 0.1 °C• Automatic calculation of the air flow

(introducing the emitter area)• Maximum-Minimum and average values• Ø 70 mm vane probe• RS-232 serial port• With carrying case 380.60

INDICATOR PANELS Code Item €

CLOCK - THERMOMETER - HYGROMETER

IM 16 122

• Matt black metallic box• Methacrylate sight• White LED digits, 38 mm hight, visible from

25 m away.• Built-in temperature and humidity sensors• Stores the time in case of no supply (2 weeks)• Ranges: -9.9 to 50 °C

0.0 to 99.9% RH• Resolution/accuracy:

– Temperature: 0.1 °C - 1%– Humidity: 0.1% - 4% RH (0 to 80% RH)

• Cable: 1.5 m with Schuko case• Dimensions: 280 x 170 x 35 mm• Assembly on the wall or on the tableRTH 187.00

THERMOMETER - HIGROMETER - BIG SIZEIn accordance with RD 1826/2009 that changes theregulation of thermal installations on big facilities.• Fulfills its duty of showing the values of temperature

and humidity for each 1 000 m² area• Format >A3 according to the norm• Option of up to 4 external sensors of °C/ RH %• Calculates the average value connected probes and

shows it on the display (optionally it can be shown as sequence on the connected channels).

• Aluminium casing• Prepared for assembly on wall with VESA1000

standard support• Display dimensions: 535 x 327 x 53 mm• Height of digits: 100 mm• Weight: 4.30 kg• Temperature: Range: 0 - 50 °C Resolution: 0.1 °C Max. error: < 0.5 °C• Humidity: Range: 0 to 99.9 % RH Resolution: 0.1 % RH Max. error: < 3% RH

STANDARDIM 16 135IM 16 136

TH-GH without probeProbe °C/ RH (90 x 65 x 20 mm)

400.0095.00

ETHERNET

IM 16 138IM 16 136

• With TCP/IP Ethernet communication • Supplied with sender protocol that sends data from

the T - H to the Ethernet networkTH-GH ETHERNET without probeProbe °C/ RH (90 x 65 x 20 mm)

665.0095.00

TOCOMPLY

RITER.D. 1826/2009



163

CLAMP METERS AND DIGITAL MULTIMETERSCode Item €

CLAMP METERS

IM 14 200 Mod. PA10• Complies with CE & IEC-1010 norms (safety)• Ranges: 0-600 V ac, 0-1000 V dc, 0-600 A ac, 0-2 MΩ• Frequency: 2 KHz• Clamp opening range: 2" (5 cm)• Power supply: 9 V alkaline battery• Dimensions: 230 x 68 x 35 mm. • Weight: 300 g (including battery)• Includes proof tips and case 34.00

IM 14 235 Mod. PA30• Backlit LCD display• Ranges: 0-600 V ac/dc, 0-400A ac, 0-20 MΩ• CAT III (600 V)• 23 mm clamp size• Capacity, continuity and diode test• Power supply: 2 AAA 1.5V battery• Dimensions: 200 x 50 x 35 mm• Weight: 200 g• Equipped with proof tips and case 41.00

IM 14 240 Mod. PA40• Backlit LCD display• Ranges: 0-600 V ac/dc, 0-400A ac, 0-20 MΩ• CAT III (600 V)• 23 mm clamp size• Capacity, continuity and diode test• Power supply: 2 AAA 1.5V battery• Dimensions: 200 x 50 x 35 mm• Weight: 200 g• Equipped with proof tips and case 82.00

DIGITAL MULTIMETER

IM 14 215 Mod. M10• Complies with CE and IEC-1010 norms (safety) CAT II (600 V)• Backlit display• Ranges: 0-600V ac/dc, 0-10A dc, 0-2 MΩ• Resistance, continuity and diode test• Rubber protector and proof tips• Power supply: 9 V battery• Dimensions: 138 x 69 x 31 mm• Weight: 170 g 17.00

IM 14 220 Mod. M20• Backlit LCD display• Ranges: 0-600V ac/dc, 0-200 mA ac/dc, 0-20 MΩ• CAT III (1000 V)• Auto-ranging with auto power off• Continuity and diode test• Flashlight• Voltage detector without contact• Power supply: 2 AAA 1.5 V battery• Dimensions: 104 x 55 x 32.5 mm. • Weight: 145 g• Includes proof tips and case 44.00

PA10

PA30

PA40

M10

M20



DIGITAL HYGROMETERS-THERMOMETERSCode Item €

«THDV-5020» DIGITAL THERMOMETER-HYGROMETERFOR WINDOW

IM 16 020

• Functional and elegant design• Liquid crystal display• Fixing to glass by adhesive tape• Easy removal for cleaning• Maximum memory - minimum temperature• Measuring ranges: -25 to +70 °C / 30 - 80% RH• Power supply: 1 AAA 1.5 V battery• Dimensions: 105 x 97 x 19 mmMod. THDV-5020 27.10

«THDI-3052» WIRELESS DIGITALTHERMOMETER-HYGROMETER

IM 16 025

• Indoor and outdoor temperature and humidity• Remote sensor for outdoor temperature & humidity• Maximum range of remote sensor: 100 m

on a free field• Maximum-Minimum memory• Transmission frequency: 868 MHz• Frost icon• Measuring ranges:

Inside temp.: -10 to +50 °COutside temp.: -20 to +70 °CInside-Outside humidity: 20 - 90% RH

• Power supply: 2 batteries based AAA (1.5 V)Outside sensor 2 batteries AAA (1.5 V)• Dimensions: 105 x 97 x 19 mmMod. THDI-3052 31.75

Code Item €

«TESTO 605-H1-N» POCKETHYGROMETER-THERMOMETER

IM 16 247 TESTO 605-H1-N Pocket series• Ranges: 0 a +50 °C 5 - 95% RH• Dew point calculation (td)• Resolution: 0.1 °C 0.1% RH• Accuracy: ± 0.5 °C ± 3% RH• Probe: Ø 12 mm, length 125 mm• Supplied with multi-use clip and duct support 98.89

«TESTO 610» POCKETHYGROMETER-THERMOMETER

IM 16 248 TESTO 610 - Pocket series• Dew point calculation and wet bulb included• Ranges: -10 to +50 °C / 0 - 100% RH• Accuracy: ± 0.5 °C / ± 2.5% RH• Resolution: 0.1% / 0.1% RH• Dimensions: 119 x 46 x 25 mm• Hold function / Max. / Min. • Protective cap for safe storage, belt case, wrist strap,

batteries and calibration protocol included 133.33

Exterior probe

TESTO 610

TESTO 605-H1-N



165

DIGITAL HYGROMETERS-THERMOMETERSCode Item €

«TESTO 625 N»TERMO-HYGROMETER

IM 16 231IM 16 235

• Range: 0 to 100% RH / -10 to 60 °C (NTC)-200 to 1370 °C (thermo-pair K)

• Resolution: 0.1% RH / 0.1 °C / 0.1 °C• Accuracy: (± 2.5% RH) (5 to 95% RH)

±0.5 °C• Compact humidity probe• Air speed, air flow, humidity, temperature, dew point

and wet bulb temp.• Probes connection via radio communication

with optional module• Measured values printing with optional printer• MIN - MAX - HOLD function• Automatic switch-off• Display with light• Power supply: 1 LR-61 9 V battery• Dimensions: 182 x 64 x 40 mmTESTO-625 N with integrated probeHandle with 1 m wire

221.1145.56



Code Item €

BZ-05 HYGROMETER-THERMOMETER

IM 16 106 • Simultaneous indication of the temperature,air humidity and time or date

• Integrated ambient icon• Indication of the maximum

and minimum registered values• Big LCD display, easy to read• Alarm clock function• Wall or table support• Temperature: Range: 0-50 °C

Resolution: 0.1 °CAccuracy: ± 1 °C

• Relative humidity: Range: 10-90% RHResolution: 1% RHAccuracy: ± 5 % RH

• Power supply: 1.5 V AAA• Weight: 74 g• Dimensions: 108 x 60 x 15 mm 35.00

«TH-20»HYGROMETER-THERMOMETER

IM 16 115 • Backlit LCD display• Ranges: -30/+80 °C

0 - 100% RH• Accuracy: ±0,5 °C

±3,0% RH• Resolution: 0,1 °C

0,1 % RH• Double reading (°C - % RH)• MAX-MIN• Dew point• Power supply: 9 V 6F22• Dimensions: 225 x 45 x 34 mm• Weight: 200 g 140.00

TESTO625 N

TH-20



DIGITAL WEATHER STATIONSCode Item €

«EDM-1102»DIGITAL WEATHER STATION

IM 16 035

• Finished in rubber very pleasant to the touch• Backlit display• Indication of temperature, humidity and time• Weather forecast by symbols• Temperature graphic of the last 12 hours• Calendar and alarm• Clock format: 12 / 24 h• Symbols of comfort level• Maximum - Minimum memory• Measuring ranges : 0-50 °C / 20 -99% RH• Desktop or wall mounting• Power supply: 2 AAA battery (1.5 V)• Dimensions: 72 x 20 (40) x 140 (144) mmMod. EMD-1102 20.80

«EDMI-1122»WIRELESS DIGITAL WEATHER STATION

IM 16 040

• Indoor and outdoor temperature and humidity• Remote sensor for outdoor temperature & humidity• Maximum range of remote sensor: 100 m

on a free field• Transmission frequency: 868 MHz• Clock, calendar and alarm• Maximum - Minimum memory• Weather forecast by symbols• Indication of moon phase• Measuring ranges: Inside temp.: -10 to +60 °C

Outside temp.: -20 to +60 °CInside-Outside humidity: 20-99% RH

• Desktop or wall mounting• Power supply: 3 batteries based AAA (1.5 V)Outside sensor 2 batteries AAA (1.5 V)• Dimensions: 100 x 34 x 168 mmMod. EMDI-1122 60.50

TACHOMETERSCode Material €

PHOTO LASER / TOUCH TACHOMETER

IM 19 205 Mod. TC-10• Ranges: 99.999 rounds, 5-99.9999 RPM

0.05 - 1999.9 M/min• Accuracy: 0.05% ± 1 d• MAX-MIN• Auto range selection• Photo measuring distance: 50 mm - 500 mm• Power supply: 4 alkaline batteries 1.5 V AA• Dimensions: 160 x 74 x 37 mm• Weight: 200 g• Includes cone tips• Carrying case 150.00

DISTANCE METERCode Material €

IM 19 302 Mod. MD10• Measuring range: from 0.4 to 18 m• Accuracy: ± 0.5% ± 1 d• Volume and SQM calculation• Power supply: 9 V battery• Dimensions: 150 x 52 x 34 mm• Weight: 123 g 45.00



167

DIGITAL MANOMETERS (AIR OR GAS)Code Material €

DIFFERENTIAL MANOMETER

IM 25 108 TESTO 510 Pocket series• Pcs. measuring: hPa/mbar, mmH2O, mmHg, inH2O, psi• Range: 0 to 100 hPa/mbar• Accuracy: ± 0.03 hPa (0...0.30 hPa)

± 0.05 hPa (0.31...1.00 hPa)• Resolution: 0.01 hPa• Dimensions: 119 x 46 x 25 mm• Temperature compensation• Magnetic rear for free-hand work• Hold/max./min. function• Protective cap for safe storage, belt case, wrist strap,

batteries and calibration protocol included 157.78

INTEGRATING SOUND LEVEL METERCode Material €

SC102 SOUND LEVEL METER - CLASS 2

IM 20 215 • Measurement protocols for: traditional soundlevel meter, vehicles, activities and community,risks at work, machinery, acoustic power

• High-resolution screen (3.2")• Only three operating keys

(soft key)• Range: 30 to 130 dB• Power supply: 2 LR-06 or USB connection

(cable not included)• Dimensions: 291 x 82 x 20 mm• Weight: 463 g• Resolution: 0.1 dB• Includes: carrying case 929.35

ALKALINE BATTERIES (BLISTER)Code Type Characteristics Pcs. Blister €/Blister

• 0% cadmium mercury• Best quality

IM 27 081 AAA-LR03 • Voltage: 1.5 V• Size: 10.2 x 44.1 4 2.00

IM 27 082 AA-LR06 • Voltage: 1.5 V• Size: 14.5 x 50.5 4 2.00

IM 27 083 C-LR14 • Voltage: 1.5 V• Size: 26.20 x 50 2 2.60

IM 27 084 D-LR20 • Voltage: 1.5 V• Size: 34.2 x 61.5 2 3.85

IM 27 085 9V-LR09 • Voltage: 9 V• Size: 26 x 17.5 x 48.5 1 2.28

INCLUDES

DECLARATION

OF CONFORMITY

w/o ministerial order

from 16-12-98



ALUMINIUM SUPERFLEXIBLE DUCT

Code Item €/m

“ESCOFLEX"

CA 07 102CA 07 103CA 07 104CA 07 105CA 07 106CA 07 107CA 07 123CA 07 108CA 07 109CA 07 110CA 07 111CA 07 113CA 07 125CA 07 115CA 07 116CA 07 117CA 07 118CA 07 119

• Supplied in 10 meters• Folded from 0.5 to 0.7 m• Temperatures from -20 to 110 °C• Maximum Speed: 20 m/sec.• Pressure: 175 mm WLCM• M1 class52 mm diameter76 mm diameter82 mm diameter102 mm diameter *127 mm diameter *152 mm diameter *160 mm diameter *180 mm diameter203 mm diameter *229 mm diameter254 mm diameter *305 mm diameter *315 mm diameter356 mm diameter406 mm diameter457 mm diameter508 mm diameter610 mm diameter

1.201.221.261.261.471.741.912.462.403.283.334.314.375.597.348.84

10.3713.76

*Quantity special offers.

INSULATED ALUMINIUMSUPERFLEXIBLE DUCT

Code Item €/m

“INSULATED ESCOFLEX"

CA 07 205CA 07 206CA 07 207CA 07 223CA 07 208CA 07 209CA 07 210CA 07 211CA 07 213CA 07 225CA 07 215CA 07 216CA 07 217CA 07 218CA 07 219

• Supplied in 10 meters• Folded at 1.15 m• Temperatures from -20 to 110 °C• Maximum 20 m/sec.• M1 class (C.S.T.B.)102 mm diameter *127 mm diameter *152 mm diameter *160 mm diameter *180 mm diameter203 mm diameter *229 mm diameter254 mm diameter *305 mm diameter *315 mm diameter356 mm diameter406 mm diameter457 mm diameter508 mm diameter610 mm diameter

4.104.645.265.426.286.508.638.82

13.0513.1914.4317.1918.7821.9025.34

*Quantity special offers.

Standard

insulated

Description:Super flexible tube with steel helicoidal frame and two aluminum layers.

Advantages:- Very light.- Very flexible.- Super compressible.- Easy to set up:- Aesthetically finished.

Description:Duct made of ultra-flexible aluminum with 25 mm thermal insulation of fiberglass, density 16 kg/cm³ and vapor barrier with complex of reinforced aluminum.

Advantages:- It avoids thermal losses.- Vapor barrier.- Very flexible.



169

ALUMINIUM ACOUSTICALLY INSULATEDSUPERFLEXIBLE DUCT

Code Item €/m

“ESCOFLEX ACOUSTIC INSULATION”


• Supplied in 10 meters• Folded at 1.15 m• Temperatures from -20 to 120 °C• Maximum air speed: 15 m/sec.• Max. pressure: 300 mm WCLM• M1 class (C.S.T.B.)102 mm diameter127 mm diameter152 mm diameter160 mm diameter180 mm diameter203 mm diameter229 mm diameter254 mm diameter305 mm diameter315 mm diameter356 mm diameter406 mm diameter457 mm diameter508 mm diameter610 mm diameter

4.615.115.525.766.597.048.159.11

10.4610.9812.0616.3020.3121.9041.19

KOMBI ALUMINIUM SUPERFLEXIBLE DUCTWITH BLACK PVC EXTERNAL PROTECTION

Code Item €/m

“ESCOFLEX KOMBI"


• Supplied in 10 meters• Working temperature: -30 to 140 °C• Maximum air speed: 30 m/sec.• Maximum working accuracy: 300 mm WCLM• Fire reaction class 1 (Giordano Institute)102 mm diameter127 mm diameter152 mm diameter160 mm diameter180 mm diameter203 mm diameter229 mm diameter254 mm diameter305 mm diameter315 mm diameter356 mm diameter406 mm diameter457 mm diameter508 mm diameter610 mm diameter

3.123.524.324.475.135.726.887.569.08

10.1711.9113.6517.3120.2223.98

acoustic

Description:Duct made of ultra-flexible perforated aluminum for acoustic and thermal insulation with 25 mm glass fiber in the inner of pipe.

Description:Complex consisting of 3 layers of aluminum and 2 layers of polyester film externally coated with a layer of black PVC.

KOMBI



ALUMINIUM SUPERFLEXIBLE DUCT WITHBLACK PVC EXTERNAL PROTECTION

Code Item €/m

CA 07 155CA 07 156CA 07 157CA 07 158CA 07 159CA 07 160CA 07 162CA 07 164CA 07 165CA 07 166CA 07 167

• Supplied in 10 meters• Folded at 0.5 to 0.7 m• With black PVC outer layer• Temperatures from -20 to +110 °C• Maximum speed 20 m/sec.• Pressure175 mm WCLM102 mm diameter127 mm diameter152 mm diameter160 mm diameter180 mm diameter204 mm diameter254 mm diameter305 mm diameter315 mm diameter355 mm diameter405 mm diameter

2.402.863.584.064.424.696.017.207.548.46

10.09

ALUMINIUM SUPERFLEXIBLE DUCT WITHGREY PVC EXTERNAL PROTECTION

Code Item €/m

«ESCOFLEX-KOMBIFLEX»

CA 07 355CA 07 356CA 07 357CA 07 358CA 07 359CA 07 360CA 07 362CA 07 363CA 07 364CA 07 365CA 07 366

• Supplied in 10 m• Folded from 0.5 to 0.7• Exterior GREY PVC layer• Working temperature: -20 °C to +110 °C• Maximum speed 20 m/sec• Maximum pressure: 175 mm WCLM102 mm diameter127 mm diameter152 mm diameter160 mm diameter180 mm diameter204 mm diameter254 mm diameter305 mm diameter315 mm diameter355 mm diameter405 mm diameter

2.402.863.584.064.424.696.017.207.548.46

10.09

ELASTICS JOINTSCode Item €

«JUNTAESC 45»

CA 09 303CA 09 304

• For the installer (clinch)• Dimensions: 45 x 60 x 45 mm.RO 4560-25 25 meters rollRO 4560-50 50 meters roll

61.22122.42

«SUPERESC»

CA 09 313

• Working temperature: -30 to 70° C• Dimensions: 70 x 100 x 70RO 70100-25 25 meters roll 94.85

«SUPER-TEMPESC»

CA 09 321

• Polyurethane with glass fiber• Working temperature: 400 °C/2 hours• Resistance to fire M0• Dimensions: 50 x 60 x 50 mmPU 5060-25 25 meters roll 124.32

400º C2 hours

black

grey



171

FIXING FLEXIBLE TUBESTO FIBER DUCTS

«CONDUC-COLL» sleeve with flange

Assembly Code Item €

AI 39 003AI 39 004AI 39 005AI 39 015AI 39 006AI 39 007AI 39 008AI 39 009AI 39 010AI 39 016AI 39 011AI 39 012

Ø 100Ø 125Ø 150Ø 160Ø 175Ø 200Ø 225Ø 250Ø 300Ø 315Ø 350Ø 400

3.904.254.754.955.105.605.855.956.857.057.508.50

«FIBRA-COLL» sleeve for screwing



Ø 100Ø 125Ø 150Ø 160Ø 175Ø 200Ø 225Ø 250Ø 300Ø 315Ø 350Ø 400

3.984.204.704.905.005.505.806.367.818.759.50

11.50

«TUB-COLL» sleeve with 3 feet



Ø 100Ø 125Ø 150Ø 160Ø 175Ø 200Ø 225Ø 250Ø 300Ø 315Ø 355Ø 400

3.243.403.964.054.354.905.365.758.899.159.50

11.50



FIXING ACCESSORIES FOR FLEXIBLE TUBEMetal strip for flexible pipes

Code Item €

FORMABLE CLAMPS

CA 07 911CA 07 916

30 meters rollLoose devicesBox of 50 devices by traction

26.460.67

0.57/pc.

ADJUSTABLE CLAMPS

CA 07 941CA 07 942CA 07 943CA 07 944CA 07 945CA 07 946CA 07 947CA 07 948CA 07 949CA 07 950

• Stainless steel strip• Adjustable traction device

I 110 (50 to 110)I 135 (60 to 135)I 170 (60 to 170)I 215 (60 to 215)I 270 (60 to 270)I 325 (60 to 325)I 380 (60 to 380)I 425 (60 to 425)I 525 (60 to 525)I 660 (60 to 660)

0.961.021.131.351.471.811.972.492.823.10

MOUNTING SEQUENCE OF ADJUSTABLE CLAMPS

Plastic clamps for flexible pipes

Code Dimensions Ø Max. duct Box pieces €/pc.

• 6.6 BLACK color polyamide• Self-extinguishing• Use from -40 to 110 °C

CA 07 955CA 07 958CA 07 959CA 07 961CA 07 962

7.8 x 5407.8 x 7809 x 780

12.5 x 10009 x 1220

up to Ø160up to Ø230up to Ø230up to Ø305up to Ø355

1001001005050

0.530.570.881.491.66

CA 07 969 ATC8 Tighten and Cutting Pliers (up to 8 mm) 40.00

CA 07 970 ATC Tighten Pliers (up to 13 mm wide) 105.00CA 07 969

CA 07 970

1 2 3 4 5 6 7



173

CIRCULAR HELICAL DUCTAND GALVANIZED SHEET ACCESSORIES

DIMENSIONS(in mm Ø)

DUCT(3 m sections)

COUPLINGMALE / MALE

COUPLINGWITH FLANGE

ENDCAP

45°BEND

90°BEND

First code -> CA 01 002 CA 01 071 CA 01 202 CA 01 302 CA 01 452 CA 01 522

100 5.28 € / m 2.47 € 8.30 € 6.74 € 10.44 € 12.40 €

125 6.50 € /m 2.47 € 8.58 € 7.07 € 12.06 € 13.25 €

150 7.85 € / m 2.73 € 8.58 € 7.38 € 13.97 € 15.62 €

175 8.95 € / m 3.38 € 9.05 € 8.71 € 15.54 € 19.54 €

200 10.45 € / m 3.37 € 8.86 € 8.35 € 17.34 € 24.13 €

250 13.40 € / m 4.11 € 11.02 € 9.78 € 22.63 € 30.48 €

300 18.75 € / m 4.98 € 13.99 € 12.87 € 29.70 € 41.24 €

355 26.21 € / m 5.78 € 15.60 € 13.11 € 34.99 € 47.35 €

400 29.96 € / m 6.81 € 15.60 € 15.40 € 41.24 € 64.00 €

SIMPLE TEES AND DERIVATION TOOLS

DIMENSIONS(in mm Ø)

90°SIMPLE TEES

45°SIMPLE TEES

SURFACECLAMP

CLAMPWITH NUT M8 CHECKPORT CHIMNEY CAP

First code -> CA 01 602 CA 01 562 CA 01 172 CA 01 280 CA 01 229 CA 01 336

100 10.71 € 15.29 € 5.66 € 5.35 € 19.83 € 16.13 €

125 12.95 € 17.28 € 5.97 € 5.35 € 20.28 € 17.65 €

150 17.29 € 23.09 € 6.71 € 6.10 € 21.65 € 18.84 €

175 19.87 € 25.51 € 7.24 € 6.83 € — 19.69 €

200 26.29 € 30.42 € 7.52 € 6.52 € 22.95 € 22.77 €

250 39.05 € 41.42 € 10.44 € 7.89 € 27.41 € 26.20 €

300 44.46 € 56.11 € 11.56 € 8.67 € 30.56 € 31.09 €

355 50.57 € 64.43 € 14.24 € 10.60 € 39.33 € 34.35 €

400 62.28 € 83.16 € 15.24 € 10.60 € 45.90 € 45.60 €

ALL MODELS IN STOCK IN OUR BRANCH OFFICES

¹ Special sizes not available.² For bigger sizes, from Ø450 to Ø1250, please consult Air Ducting price list.



REDUCTIONSd

D 80 100 125 150 175 200 250 300 355

100 7.75

125 9.61 9.61

150 11.80 11.80 12.13

175 13.65 13.99 13.99 13.99

200 15.51 16.17 16.00 16.00 15.84

250 20.73 20.73 20.73 20.73 20.73 20.40

300 25.62 25.79 25.79 25.62 25.44 25.28 24.44

355 31.69 31.69 31.69 31.69 31.52 31.34 31.02 29.84

400 37.42 37.42 37.25 37.25 37.09 37.09 36.57 35.40 34.05

Note: Intermediate sizes are not available.

TOOLS FOR PLATE WORKING“TS1” shear for opening windows in plate

Code Model €

MA 17 155MA 17 156

• Quick and accurate cutting• Connection to drill bits• Cutting up to 1 mm• Weight: 0.73 kg• Long life tempered steel blade• Left cutting• 13 mm minimum inlet holeTS1 shear for drillTS1RB Spare blades kit

189.0084.00

Spherical cutter

Code Model €

MA 17 161MA 17 162MA 17 165MA 17 166

• Mandrel inlet Ø 6.35 mm• Aluminium body• Perfect cut thanks to high speed bearings• Smooth cutting without burrs• Graduation system in mm• Connection drill chucksHC1 spherical cutter (50 to 300 mm)HC2 spherical cutter (50 to 500 mm)HC1B spare pivot shaftCB spare cutting shaft

200.00254.0028.0037.00

L = 2 (D-d)e = 50

TS1

HC1



175

VENTILATION BOXES WITHINCORPORATED MOTOR

«BD ERP» series

General features:

- Inner insulator in self-extinguishingexpanded polyethylene.

- Fan installed on four rubbershock-absorbers

- Two accessible covers.

- Two available models:WORK and CIRCLE-SHAPE WORK.

- Finishing in galvanized metal sheet

Standard ports Circular ports

7/7 M6 7/7 M4 9/9 M6

9/9 M4 10/10 M6 10/10 M4

12/12 M6 12/12 T6 15/15 T6



ERP VENTILATION BOXES

«WORK» series

Code Models equivalences Power(kW)

Motor(CV) R.p.m €

«OBRA POLYAMIDE IMPELLER»

CV 01 601CV 01 602CV 01 603CV 01 604CV 01 605CV 01 606CV 01 607CV 01 608CV 01 609

BD ERP 19/19 M6BD ERP 19/19 M4BD ERP 25/25 M6BD ERP 25/25 M4BD ERP 28/28 M6BD ERP 28/28 M4BD ERP 33/33 M6BD ERP 33/33 T6BD ERP 39/39 T6

7/77/79/99/9

10/1010/1012/1212/1215/15

0.040.120.120.370.180.550.751.12.2

single-ph.single-ph.single-ph.single-ph.single-ph.single-ph.single-ph.three-ph.three-ph.

9001350900

1350900

1350900900900

240.00245.00274.00290.00301.00318.00479.00443.00825.00

«OBRA PLATE IMPELLER»

CV 01 641CV 01 642CV 01 643CV 01 644CV 01 645CV 01 646CV 01 647

BD ERP RC 19/19 M6BD ERP RC 25/25 M4BD ERP RC 28/28 M6BD ERP RC 28/28 M4BD ERP RC 33/33 M6BD ERP RC 33/33 T6BD ERP RC 39/39 T6

7/79/9

10/1010/1012/1212/1215/15

0.070.370.250.550.741.12.2

single-ph.single-ph.single-ph.single-ph.single-ph.three-ph.three-ph.

9001350900

1350900900900

260.00305.00320.00335.00495.00460.00845.00

DIMENSIONS

Fan A B C D E F G

BD 19/19 7/7 430 450 450 257 230 367 373

BD 25/25 9/9 500 490 490 326 283 436 413

BD 28/28 10/10 560 525 525 357 312 497 447

BD 33/33 12/12 625 560 650 416 368 562 572

BD 39/39 15/15 720 800 800 490 425 662 682

«CIRCLE-SHAPE WORK» series

Code Models equivalences Power(kW)

Motor(CV) R.p.m €

CV 01 621CV 01 622CV 01 623CV 01 624CV 01 625CV 01 626CV 01 627CV 01 628CV 01 629

BD ERP 19/19 M6BD ERP 19/19 M4BD ERP 25/25 M6BD ERP 25/25 M4BD ERP 28/28 M6BD ERP 28/28 M4BD ERP 33/33 M6BD ERP 33/33 T6BD ERP 39/39 T6

7/77/79/99/9

10/1010/1012/1212/1215/15

0.040.120.120.370.180.550.751.12.2

single-ph.single-ph.single-ph.single-ph.single-ph.single-ph.single-ph.three-ph.three-ph.

9001350900

1350900

1350900900900

273.00275.00303.00317.00334.00344.00527.00488.00908.00

CIRCULAR DIMENSIONS

Fan A B C Ø

BD 19/19 7/7 430 450 450 250

BD 25/25 9/9 500 490 490 350

BD 28/28 10/10 560 525 525 400

BD 33/33 12/12 625 560 650 450

MotorCLOSEDIP 55



177

ACCESSORIES FOR WORK VENTILATION BOXESFanSize

Visors Blindcover

Cover withinlet²

Pressure gridFilter holder

Discharge Suction Discharge Suction

First code: CV 05 103 -> 123 -> 603 -> 642 -> 303 -> 403 -> 521 ->

BD 19/19 AT7/7 31.42 € 47.38 € 7.98 € 16.74 € 58.97 € 82.14 € 61.03 €

BD 25/20 AT9/7 32.96 € 47.38 € 12.10 € 24.72 € 64.63 € 93.99 € 69.53 €

BD 25/25 AT9/9 32.96 € 47.38 € 9.79 € 18.54 € 73.90 € 93.99 € 69.53 €

BD 28/21 AT10/8 38.88 € 51.24 € 14.16 € 27.04 € 64.63 € 101.97 € 74.93 €

BD 28/28 AT10/10 38.88 € 51.24 € 10.82 € 21.12 € 73.90 € 105.58 € 74.93 €

BD 33/25 AT12/9 39.14 € 59.48 € 12.62 € 29.61 € 90.90 € 144.46 € 83.17 €

BD 33/33 AT12/12 39.14 € 59.48 € 13.13 € 30.90 € 98.37 € 151.41 € 83.17 €

BD 39/39 AT15/15 46.87 € 60.51 € 19.57 € 31.93 € 102.49 € 171.24 € 118.19 €

¹ For other filter types such as Viledon blanket or polyurethane foam, please see additional information.² For covers with small or round inlets with more than one entry, there is an additional charge of 13.65 ¤ (CV 05 186) each inlet.

Section changesImpulse hopper

Circulardiameter

BD 19/19AT 7/7

BD 25/20AT 9/7

BD 25/25AT 9/9

BD 28/21AT 10/8

BD 28/28AT 10/10

BD 33/25AT 12/9

BD 33/33AT 12/12

BD 39/39AT 15/15

First code: CV 05 823 -> 831 -> 841 -> 851 -> 861 -> 871 -> 881 -> 891 ->

150 33.99 ¤ 52.02 ¤ 39.14 ¤ — — — — —

200 33.99 ¤ 58.97 ¤ 39.14 ¤ 57.42 ¤ 42.49 ¤ 50.73 ¤ 67.21 ¤ —

250 35.79 ¤ 62.32 ¤ 40.69 ¤ 67.47 ¤ 42.49 ¤ 50.73 ¤ 51.76 ¤ —

300 42.23 ¤ 64.89 ¤ 42.23 ¤ 70.81 ¤ 44.55 ¤ 50.73 ¤ 51.76 ¤ 90.38 ¤

350 — 69.27 ¤ 43.52 ¤ 74.93 ¤ 46.09 ¤ 52.27 ¤ 53.56 ¤ 93.47 ¤

400 — — 58.71 ¤ 79.31 ¤ 49.44 ¤ 56.65 ¤ 58.20 ¤ 96.82 ¤

450 — — — — 75.71 ¤ 80.34 ¤ 80.86 ¤ 100.17 ¤

500 — — — — — 99.14 ¤ 100.17 ¤ 105.58 ¤

Note: In case of special sizes, please apply the next price.

ULTRA-FLAT VENTILATION BOXES«BC» series

Code Type Pow. m³/h r.p.mDimensions

€A B C Ø

CV 02 031 BC 250 65W. 290 2450 300 300 230 120 173.63

CV 02 032 BC 400 80W. 375 2400 300 300 195 110 165.83

CV 02 033 BC 600 85W. 460 1250 425 375 195 110 192.61

Visors Blind cover Cover withcircular inlet

Pressure grid Filter holder

Discharge measures



400 °C/2h FAN BOXESBP-MU series

TRANSMITTER SET

- Transmitter activated by built-in motor,not interfering with the air flow.

- Tensor-base-worm drive system, adjustablefrom the outside.

TURBINE AND MOTOR

- Multiple-bladed turbine with double galvanizedsteel air inlet.

- Standardized squirrel-cage induction motorwith IP-55 protection and type F insulation.

ASSEMBLY

- U-shaped guides in the lower part to make transportand assembly easier.

- Fan mounted in compact, weather-proof galvanized steel box.

Code Description PowerkW

Weightkg

Max. flow ratem³/h €

THREE-PHASE

VE 10 750VE 10 751VE 10 752VE 10 753VE 10 754VE 10 755VE 10 756VE 10 757VE 10 758VE 10 759VE 10 760VE 10 761VE 10 762VE 10 763VE 10 764VE 10 765VE 10 766VE 10 767VE 10 768VE 10 769VE 10 770VE 10 771VE 10 772VE 10 773VE 10 774VE 10 775VE 10 776VE 10 777

BP-MU 400°/2h 9/9 1/2 HPBP-MU 400°/2h 9/9 3/4 HPBP-MU 400°/2h 9/9 1 HPBP-MU 400°/2h 9/9 1.5 HPBP-MU 400°/2h 10/10 1/2 HPBP-MU 400°/2h 10/10 3/4 HPBP-MU 400°/2h 10/10 1 HPBP-MU 400°/2h 10/10 1.5 HPBP-MU 400°/2h 10/10 2 HPBP-MU 400°/2h 12/12 1/2 HPBP-MU 400°/2h 12/12 3/4 HPBP-MU 400°/2h 12/12 1 HPBP-MU 400°/2h 12/12 1.5 HPBP-MU 400°/2h 12/12 2 HPBP-MU 400°/2h 12/12 3 HPBP-MU 400°/2h 15/15 3/4 HPBP-MU 400°/2h 15/15 1 HPBP-MU 400°/2h 15/15 1.5 HPBP-MU 400°/2h 15/15 2 HPBP-MU 400°/2h 15/15 3 HPBP-MU 400°/2h 15/15 4 HPBP-MU 400°/2h 15/15 5.5 HPBP-MU 400°/2h 18/18 1.5 HPBP-MU 400°/2h 18/18 2 HPBP-MU 400°/2h 18/18 3 HPBP-MU 400°/2h 18/18 4 HPBP-MU 400°/2h 18/18 5.5 HPBP-MU 400°/2h 18/18 7.5 HP

0.370.550.751.1

0.370.550.751.11.5

0.370.550.751.11.52.2

0.550.751.11.52.234

1.11.52.234

5.5

40424346474950545969717275798790919495

103105110127131139141146160

3,1003,5003,8004,4003,5004,0004,4505,1005,5504,5005,4005,9006,8007,4008,4005,5006,0007,8508,7009,850

10,90012,00011,00012,00014,10015,80017,50019,500

998.001,016.001,040.001,077.001,045.001,067.001,088.001,153.001,184.001,187.001,209.001,230.001,275.001,305.001,377.001,489.001,545.001,567.001,614.001,696.001,710.001,844.001,897.001,921.002,030.002,060.002,166.002,332.00

Note: If the technical data are not specified (static pressure, fan revolutions),15/20 mm WCLM (200 Pa) standard setting will be supplied. (200 Pa)

OUTSIDE

THE RISK

AREA

Certificate



179

CHARTS AND OPERATION

DIMENSIONS

Model A B C D E F G H I K L M N

BP-MU 9/9 780 562 792.5 301 260 30 678 454 29 970 890 721.5 60

BP-MU 10/10 825 592 852 330 291 30 723 484 29 1029 949 766.5 60

BP-MU 12/12 950 677 970 396 341 30 848 570 29 1147 1067 891.5 60

BP-MU 15/15 1100 802 1102.5 473 404 30 1006 699 29 1280 1200 1041.5 60

BP-MU 18/18 1271 923.5 1278.5 556 483 30 1175 818 29 1456 1376 1211 60

BP-MU 9/9 BP-MU 10/10

BP-MU 15/15

BP-MU 18/18

BP-MU 12/12



CENTRIFUGAL FANS

Low pressure built-in motor

Code Item Power(kW) €

BP-ERP SERIES BUILT-IN MOTORPOLYAMIDAL IMPELLER

SINGLE-PHASE

VE 09 001VE 09 002VE 09 003VE 09 004VE 09 005VE 09 006VE 09 007VE 09 008VE 09 009VE 09 010VE 09 011VE 09 012

BP-ERP 7/7 MC 6PBP-ERP 7/7 4PBP-ERP 9/7 6PBP-ERP 9/7 4PBP-ERP 9/9 6PBP-ERP 9/9 4PBP-ERP 10/8 6PBP-ERP 10/8 4PBP-ERP 10/10 MC 6PBP-ERP 10/10 MC 4PBP-ERP 12/9 6PBP-ERP 12/12 6P

0.040.130.130.350.120.350.210.590.210.590.760.76

147.88149.92174.40191.74174.40184.60193.78205.00193.78210.10294.76345.76

THREE-PHASE

VE 09 015VE 09 016VE 09 017

BP-ERP 12/9 MC 6PBP-ERP 12/12 MC 6P BP-ERP 15/15 MC 6P

1.11.12.2

304.96308.02551.80

BP-RC SERIES BUILT-IN MOTORMETAL IMPELLER

SINGLE-PHASEW

VE 09 030VE 09 031VE 09 042VE 09 032VE 09 033VE 09 034VE 09 043VE 09 044VE 09 035VE 09 036VE 09 037VE 09 046VE 09 038VE 09 039

BP-RC 7/7 MC 6PBP-RC 7/7 MA 4PBP-RC 9/7 MC 4PBP-RC 9/9 RE 6PBP-RC 9/9 MC 4PBP-RC 9/9 MC 4PBP-RC 10/8 MC 4PBP-RC 10/8 MC 4PBP-RC 10/10 MC 6PBP-RC 10/10 MC 4PBP-RC 10/10 MC 4PBP-RC 12/9 MC 6PBP-RC 12/12 MA 6PBP-RC 12/12 MC 6P

72147373200373550373550245373550736550736

178.48233.56203.98364.12203.98230.50209.08235.60209.08209.08235.60343.72358.00343.72

THREE-PHASEW

VE 09 047VE 09 040VE 09 041

BP-RC 12/9 MC 6PBP-RC 12/12 MC 6P BP-RC 15/15 MC 6P

1,1001,1002,200

343.72343.72647.68

Low pressure built-in motor with outside rotor

Code Item RPM Flow(m³/h) €

• Adjustable flow in tension• IP44 motor B class• Air temperature: -15 to +40 °C

VE 10 423VE 10 421VE 10 424VE 10 426VE 10 422VE 10 425

CBM/4-133/190CBM/2-133/190CBM/4-160/150CBM/6-180/184CBM/2-146/180CBM/4-180/184

1,5002,8001,500900

2,8001,500

630700790980

1,1001,300

104.00121.00136.00143.00126.00211.00

MotorCLOSEDIP 55

BP-ERP (polyamide impeller)

BP-RC (metallic impeller)



181

CENTRIFUGAL FANS

Low pressure to transmission

Code Item €

“SIMPLEX” DOUBLE EAR

VE 10 021VE 10 023VE 10 024VE 10 025VE 10 026VE 10 027VE 10 029VE 10 030

Mod. 7/7 SMod. 9/9 SMod. 10/8 SMod. 10/10 SMod. 12/9 SMod. 12/12 SMod. 15/15 SMod. 18/18 S

118.00140.00152.00157.00181.00182.00213.00279.00

SET OF SUPPORT WITH SCREWS AND RUBBERS

VE 10 071VE 10 072VE 10 077VE 10 073VE 10 078VE 10 074VE 10 076

Set S - 7Set S - 9Set S - 10/8Set S - 10Set S - 12/8Set S - 12Set S - 18

2.312.312.312.312.312.313.47

SUPPORT AND ENGINE TENSIONER WITH SCREWS

VE 10 081VE 10 082VE 10 083VE 10 084VE 10 085VE 10 086VE 10 088VE 10 090

Tensioner set T 7/7Tensioner set T 9/9Tensioner set T 10/8Tensioner set T 10/10Tensioner set T 12/9Tensioner set T 12/12Tensioner set T 15/15Tensioner set T 18/18

2.312.313.473.474.624.625.786.83

“CUBIK” DOUBLE EAR

VE 10 041VE 10 042VE 10 043VE 10 044VE 10 045

CBXC 9/9 CCBXC 10/10 CCBXC 12/12 CCBXC 15/15 CCBXC 18/18 C

189.00205.00237.00297.00370.00

SINGLE-PHASE SPEED REGULATORSCode Model €

2.5 Amp. REGULATOR

VE 10 151VE 10 152

RVS - MU - 2.5 SurfaceRVE - MU - 2.5 Embedded

47.0044.00

5 Amp. REGULATOR

VE 10 153 RV - MU - 5 Surface 85.00

10 Amp. REGULATOR

VE 10 154 RV - MU - 10 Surface 130.00

Mod. RVE - To build in Mod. RVS - Surface



WALL AXIAL FANSCode Item Power

(W) RPM Flow rate(m³/h) €

HPMF seriesVE 10 801VE 10 802VE 10 803VE 10 804

HPMF 200 M4HPMF 250 M4HPMF 300 M4HPMF 350 M4

37424750

1400 RPM approx.

500900

1,3501,850

91.00103.00119.00142.00

LARGE DIAMETER FAN (PERFECT FOR FARMS)Code Model Max.

RPM kW m³/h dB(A) kg €

• Equipment with automatic opening blind on theimpulsion side

• Protective grille on transmission sideVE 10 351VE 10 352VE 10 353

VHP 80 T4 1VHP 100 T4 1,5VHP 120 T4 1,5

450450450

0.751.11.1

32,50038,00044,000

606163

8897

110

599.00620.00703.00

• Protective grille on both sidesVE 10 356VE 10 357

RX-VHP 80RX-VXP 100

450450

0.750.75

32,00037,000

6061

4861

550.00565.00

CEILING FANSCode Model Power

(W)Flow

(m³/h) €

LIGHTED MODELVD 01 808VD 01 810

Ø 90 cm and bracketØ 120 cm and bracket

5560

>200>190

67.0070.00

STANDARD MODELVD 01 807VD 01 809VD 01 811

Ø 90 cm with bracketØ 120 cm with bracketØ 140 cm with bracket

556065

>200>190>180

60.5064.0072.00

EXTRACTORS FOR INSERTING IN DUCTSMIXVENT series

Code Item Free disc. flow(m³/h) €

VD 02 068VD 02 066VD 02 067VD 02 069VD 02 063VD 02 057VD 02 064VD 02 062VD 02 070VD 02 103VD 02 104

TD 250/100 TD 350/125 TD 500/150 TD 500/160 TD 800/200 TD 800/200 N TD 1000/250 TD 1300/250 TD 2000/315 TD 4000/355TD 6000/400

240360580580

1,100880

1,0101,3002,0003,8005,500

124.03152.59185.59185.59254.32249.26342.12356.86406.86648.71887.00

TD SILENT Series

Code Item Speedrpm

Sound dB(A)

Free disc. flow (m³/h) €

VD 02 065VD 02 368VD 02 366VD 02 369VD 02 363VD 02 364VD 02 365VD 02 367

TD 160/100 N SILENTTD 250/100 SILENT TD 350/125 SILENTTD 500/150-160 SILENTTD 800/200 SILENT TD 1000/200 SILENTTD 1300/250 SILENTTD 2000/315 SILENT

2,5002,2002,2502,5002,7802,5002,5702,680

24/2124/19

1922/1719/1821/2035/3139/33

180240380580880

1,1001,2701,760

99.89142.63175.47213.42286.66393.44457.18523.70

* With internal covering to direct the sound waves and sound-absorbing insulation.

Option

60 HzPleasecheck

The

Quietest



183

DOMESTIC SERIES EXTRACTOR FANS

Low profile extractor fans for WALL

Code Item A B C D E Flow (m³/h) €

STANDARD series

VD 01 053VD 01 054VD 01 055

MU BP4 Ø100MU BP5 Ø120MU BP6 Ø150

150176205

120140165

108114132

100125150

121315

95180300

33.6438.9448.33

STANDARD WITH TIMER series

VD 01 056VD 01 057VD 01 058

MU BP4 T Ø100MU BP5 T Ø120MU BP6 T Ø150

150176205

120140165

108114132

100125150

121315

95180300

45.2749.4558.83

MU BP SERIES ACCESSORIES

VD 01 059VD 01 060VD 01 061

Ø100 non-return valveØ125 non-return valveØ150 non-return valve

9.679.67

10.74

STANDARD seriesFIXING WITHOUT HOLES

VD 01 022

• Integrable model• 10 mm thick frame• Non-return valve includedØ100 MU 4 P type 90 28.70

WALL extractors with pressure shutters

Code Item Flow (m³/h) €

CLASSIC seriesWITH TIMER

VD 01 036VD 01 037VD 01 038

Ø100 MU CR 4 T typeØ120 MU CR 5 T typeØ150 MU CR 6 T type

98190320

34.0038.0042.00

WALL extractor with low profile automatic shutter(frame 30 mm)


STANDARD LOW PROFILE series

VD 01 062VD 01 063

MU PER 4 wall/window extractorMU PER 5 wall/window extractor

95180

44.3550.55

STANDARD LOW PROFILE seriesWITH TIMER

VD 01 065VD 01 066

MU PER 4T wall/window extractorMU PER 5T wall/window extractor

95180

52.6058.80




Tubular extractor for inserting in duct


STANDARD series

VD 01 071VD 01 072VD 01 096

MU TU 4 circular Ø100MU TU 5 circular Ø120MU TU 6 circular Ø150

100150280

24.2130.4852.56

TECHNICAL DATA

Model V W r.p.m m³/h mm H2O

MU TU 4 circular 230 15 2650 100 3.5

MU TU 5 circular 230 20 2650 150 5

MU TU 6 circular 230 25 2650 280 6.9

Tubular duct extractors with base

Code ItemFlow (m³/h)

€min max

VD 01 901VD 01 902VD 01 903VD 01 904VD 01 905VD 01 906VD 01 907

MU-TT 100MU-TT 125MU-TT 150MU-TT 160MU-TT 200MU-TT 250 PROMU-TT 315 PRO

145220467467830

14002350

187280552552

104011001760

86.6894.84

159.10162.16239.68324.34395.74

DIMENSIONS

Type D D1 L H

MU-TT 100 96 126 246 190

MU-TT 125 123 126 246 190

MU-TT 150 148 185 295 250

MU-TT 160 158 185 295 250

MU-TT 200 197 209 296 261

MU-TT 250 PRO 247 287 383 323

MU-TT 315 PRO 310 362 445 408

TECHNICAL DATA

ModelFlowm³/h

Fan power(W)

Absorbed current(A)

RPM(min-1)

Sound levelDB(A)

Min Max Min Max Min Max Min Max Min Max

MU-TT 100 145 187 15 25 0.12 0.20 2450 2500 28 35

MU-TT 125 220 280 25 38 0.19 0.26 2400 2500 29 36

MU-TT 150 467 552 40 63 0.17 0.27 2350 2450 33 44

MU-TT 160 467 552 40 63 0.17 0.27 2350 2450 33 44

MU-TT 200 830 1040 90 125 0.40 0.55 2055 2510 45 52

MU-TT 250 PRO 1100 1400 125 177 0.54 0.79 1955 2240 47 55

MU-TT 315 PRO 1760 2350 225 330 0.98 1.43 1980 2660 49 58

DIMENSIONS

Motor2 speeds



185


Centrifugal kitchen extractor


• Metal case• Easy to install and clean• Filter included• Oil tray

VD 01 091VD 01 092

MU CO 300 M typeMU CO 500 M type

290480

86.18119.45

TECHNICAL DATA

Model V W r.p.m. m³/h Pa Ømm

MU CO 300 M 230 80 2200 290 210 110

MU CO 300 M 230 80 2200 290 210 110

Extractor for family houses

Features:- 5 extraction valves (4 x Ø80 and 1 x Ø125) and 1 suction valve.- Duct couplings of only Ø80 mm which reduces the installation space.- 2 speeds motor of large duration and extended efficiency.- Connection box with cover IP44.- 2 speed switch.

Code Model Pow.(W)

Flow (m³/h)

Ø80Valves

Ø125Valves €

VD 06 022 VMC ARIANT KIT 90/60 380 2 1 147.00

VD 06 023 Ø80 additional valve 10.82

MU CO 300 M

MU CO 500 M

VMC ARIANT KIT includes:

- Fan- 2 Ø80 mm ports- 1 Ø125 mm ports(Optional additional ports)



FANS FOR COLD STORAGE CHAMBERCode Model €

«VE» SERIES COOLING FAN

WE 04 406WE 04 407WE 04 408WE 04 409

• Multi-anchoring motorVEMM 5 WVEMM 10 WVEMM 16 WVEMM 25 W

12.0515.2016.7222.65

WE 04 415WE 04 416WE 04 417WE 04 418

• BladesVEP Ø200 (5 W) 28°VEP Ø230 (10 W) 28°VEP Ø250 (10-16 W) 28°VEP Ø300 (16-25 W) 28°

2.163.103.814.22

• Feet for fans

ModelDimensions (mm) For fan

ofA B H

WE 04 431 H-55 81 106 55 5W. 1.03WE 04 434 H-72 81 106 72 5W. 1.13WE 04 432 H-84 81 106 84 10/16W 2.16WE 04 433 H-109-2 78 100 109 25W. 2.16

Fans with motor, protection grille and propellers

Code Model ØPropellers

Flow ratem³/h

Nominal rating R.p.m.

Sound leveldB(A)

€W A

IMPELLERS230 V - 50 Hz SINGLE-PHASE

WE 04 494WE 04 480

VMF-250A/2MVMF-250A/4M

250250

1,8001,400

10070

0.550.30

2,5001,400

6060

79.3174.16

WE 04 495WE 04 473WE 04 474WE 04 484WE 04 475WE 04 476WE 04 487WE 04 488WE 04 489

VMF-300A/2MVMF-300A/4MVMF-350A/4MVMF-400A/4MVMF-450A/4MVMF-500A/4MVMF-550A/4MVMF-600A/6MVMF-630A/6M

300300350400450500550600630

2,8001,7432,9804,4005,5076,0468,2689,4009,500

140 80150180250420500650560

0.650.40.70.81.2

1.852.42.42.5

2,5301,3861,3801,3801,3501,3001,300900900

605862686872757275

91.6780.3491.6797.85

114.33176.13187.46214.24237.93

400 V - 50 Hz THREE-PHASEWE 04 485WE 04 486WE 04 481WE 04 482WE 04 490WE 04 491

VMF-350A/4TVMF-400A/4TVMF-450A/4TVMF-500A/4TVMF-600A/6TVMF-630A/6T

350400450500600630

3,1704,5005,6006,2469,4009,500

150180250450830560

0.40.50.60.91.51.6

1,3801,3801,3601,300900900

626868727272

100.9497.85

114.33201.88214.24237.93

PROPELLERS230 V - 50 Hz SINGLE-PHASE

WE 04 478WE 04 479WE 04 483WE 04 492WE 04 496WE 04 497WE 04 498WE 04 499

VMF-250I/4MVMF-300I/4MVMF-350I/4MVMF-400I/4MVMF-450I/4MVMF-500I/4MVMF-550I/4MVMF-600I/4M

250300350400450500550600

1,4601,7432,9804,4005,5076,0468,2689,400

7080

150180250420500650

0.300.40.70.81.2

1.852.42.4

1400138613801380135013001300900

55582

6868727572

74.1680.34

100.94113.30114.33176.13214.24237.93

Frame fans

Code Model dB(A) €«E» ASIA MODEL

VD 10 030VD 10 031

• Metal frame and plastic bladeFan 80 x 80 to 220 VFan 120 x 120 to 220 V

53160

10.3013.90

ACCESSORIESVD 10 101VD 10 103

RE-80 metal protection grille of 80 x 80 mmRE-120 metal protection grille of 120 x 120 mm

1.431.71

Multiclamp Series



187

Lames filter

ECO DUAL-CARB

Mat rollDUAL-CARB

EXTRACTION HOODS FOR INDUSTRIAL KITCHENS Economic series

Code Item €

• All exterior parts made our of stainless steelAISI 304

• IT DOES NOT INCLUDES FILTERS 490x490x50

MUNDOFAN EXTRACTION HOODDG EXCLUSIVE MODEL

KF 11 020KF 11 021KF 11 022

1000×800×4501500×800×4502000×800×450

350.00600.00800.00

MUNDOFAN EXTRACTION HOODTAU-FIRE 400ºC / 2H MODEL

KF 13 202KF 13 206KF 13 210

1000×750×435 9/9 3/41500×750×435 9/9 3/42000×750×435 9/9 3/4

2,763.002,852.002,950.00

MUNDOFAN HOODTAU ECO-PLUS MODEL WITH CTA

• In compliance with CTE, UL-300/NFPA 17ª/NFPA 96• In accordance with 97/23/EC PED standard

KF 13 100KF 13 102KF 13 104

1000×750×4351500×750×4352000×750×435It is necessary to indicate to which side the extinctionis mounted (looking at the front bell)

2,070.002,254.002,686.00

Hood accessories

Code Model €

490 x 490 FILTERS

KF 10 112KF 10 113

Slats separator filter 50 mm 50 mm AISI 304STAINLESS slats separator filter 50 mm AISI 430

41.0029.00

KF 10 213 Slats separator filter 50 mm EGC 4301 box (10 pcs.)4 boxes (40 pcs.)8 boxes (80 pcs.)1 pallet (160 pcs.)

28/pc.25/pc.22/pc.20/pc.

490 x 490 x 25 CARBON FILTERS

KF 10 141KF 08 029KF 08 019KF 08 030

22 mm ACTIVATED CARBON filter1 kg ECO granular activated carbon filter (low loss)DUAL-CARB Mundofan mat filter (G4+carbon) F1Spare parts for DUAL-CARB filter (KF08019)

73.0055.0040.0015.00

DUAL-CARB G4 F1 MUNDOFAN MAT +IMPREGNATED ACTIVE CARBON

KF 08 015KF 08 020

DUAL-CARB 1 x 20 m mat roll (20 m²)DUAL-CARB 1 x 1 m mat panel

280.0020.00

Low silhouette with ventilator400 °C/2h

NEW

Low silhouette with extinctionCTA basic

NEW

Obra Series



AIR FILTRATIONSynthetic fiber

Code Item Roll €20N POLYESTER FIBER

KF 04 022KF 04 021

20 N roll of 20 x 120 N roll of 25 x 1.63

20.00 m²40.75 m²

62.00123.00

WHITE/BLUE PROGRESSIVE POLYESTER FIBERKF 04 031 HPR 20 blue mat roll 1 x 20 m 90.00

WHITE PROGRESSIVE POLYESTER FIBERKF 04 041KF 04 051

Mat roll E3 efficiency G3Mat roll E4 efficiency G4

1 x 20 m1 x 20 m

80.0098.00

Filter mats

Code Model EfficiencyFlowxm²m³/h

Initialpressure loss

(mm.c.a)€

“VILEDON” MAT ROLLSKF 07 001KF 07 003KF 07 005

P15/150 S (1 x 40 m roll)P15/350 S (1 x 30 m roll)P15/500 S (1 x 20 m roll)

G2G3G4

7,2005,4003,600

223

300.00325.00347.00

Filter foamsCode Model Thickness (mm) €/2 m² sheet

“ESCOESP”• Polyurethane foam• Dimensions: 2 x 1 (2 m²)

KF 05 001KF 05 011KF 05 021KF 05 031KF 05 041

ESCOESP type of 5/30ESCOESP type of 10/20ESCOESP type of 15/20ESCOESP type of 20/20ESCOESP type of 30/20

510152030

16.0031.0047.0063.00

102.00

CONTROLS FOR E-BI-ON MODULESDifferential pressure switch

Code Item €KF 30 101KF 30 102

PS600PS1500

45.0045.00

Pressure gaugesCode Item €

DIFFERENTIAL PRESSURE COLUMN GAUGESKF 30 001KF 30 002

MM200600MM5001500

50.00131.00

DIFFERENTIAL PRESSURE GAUGESKF 30 015KF 30 017

DPG 600DPG 1.5 kPa

127.00127.00

Differential pressure transmittersCode Item €

KF 30 111KF 30 113

DPT2500-R8-D with displayDPT2500-R8-AZ-D with “auto-zero” and display

252.00325.00

AccessoriesCode Item €

KF 30 004KF 30 009KF 30 012

Accessories set (2 spears, screws)Small bottle column manometer2M 4/7 plastic tube

11.406.406.40

Note: The cuts to special measures are charged

NETOS plus the surplus cut.*MAT ROLLS:

The FREIGHT amounts are charged on the invoice.



189

SLIMFILTER ErP FILTER UNITS

Description:Filter units designed to take the smallest space possible. Two filters with a thickness of 48mm fit inside. Filters not included, to be chosen according to needs.

- In accordance with ErP 2009/125/CE- “SLIM” design- Easy installation- Single-phase units- Insulated on the inside

Slimfilter 300600 600600 600600 600600Code KF 51 550 KF 51 555 KF 51 560 KF 51 570Fan 7/7 9/7 9/9 10/10Nº Poles 4 4 4 4r.p.m. 1370 1376 1352 1330Power (W) 130 350 350 590Intensity (A) 1.5 2.7 2.7 4.5dB 60 60 64 66ErP 2009/125/CE Yes Yes Yes YesPVP (¤) 335.00 390.00 395.00 415.00

IDA 1 2 3 4

Efficiency F7 F9 M6 (F6) F8 M5 (F5) F7 M5 (F5) M6 (F6)

SLIMFILTER 300600 (7/7)

Code KF 02 822 KF 02 862 KF 02 802 KF 02 842 KF 02 525 KF 02 822 KF 02 525 KF 02 802

¤ 47.00 51.00 46.00 48.00 18.00 47.00 18.00 46.00

SLIMFILTER 600600 (9/7, 9/9, 10/10)

Code KF 02 820 KF 02 860 KF 02 800 KF 02 840 KF 02 526 KF 02 820 KF 02 526 KF 02 800

¤ 81.00 86.00 77.00 81.00 28.00 81.00 28.00 77.00

DIMENSIONS

Slimfilter A B C D x E F x G

7/7 395 692 632 245 223 332 554

9/7 695 692 632 312 270 630 554

9/9 695 692 632 312 270 630 554

10/10 695 692 632 343 300 630 554

7/7 M4

Freedischarge

9/7 M4

Freedischarge

9/9 M4

Freedischarge

10/10 M4

Freedischarge

TOCOMPLY

RITE



ESCOCLIMA GRILLESWHITE lacquered aluminium return grilles

Code Description €

RX 02 033RX 02 035RX 02 037RX 02 039RX 02 041RX 02 043RX 02 044RX 02 045RX 02 046RX 02 047RX 02 049RX 02 051RX 02 053RX 02 055RX 02 057RX 02 059RX 02 061RX 02 065RX 02 067RX 02 069RX 02 071RX 02 077RX 02 079

RER 200 x 100 return grilleRER 300 x 100 return grilleRER 400 x 100 return grilleRER 500 x 100 return grilleRER 600 x 100 return grilleRER 200 x 150 return grilleRER 250 x 150 return grilleRER 300 x 150 return grilleRER 350 x 150 return grilleRER 400 x 150 return grilleRER 500 x 150 return grilleRER 600 x 150 return grilleRER 800 x 150 return grilleRER 300 x 200 return grilleRER 400 x 200 return grilleRER 500 x 200 return grilleRER 600 x 200 return grilleRER 300 x 300 return grilleRER 400 x 300 return grilleRER 500 x 300 return grilleRER 600 x 300 return grilleRER 400 x 400 return grilleRER 600 x 400 return grille

11.49 13.13 14.77 16.62 18.81 12.50 13.77 14.77 16.08 17.04 19.27 21.81 25.80 16.59 19.27 21.98 24.66 20.20 24.19 29.44 33.77 28.35 42.28

WHITE lacquered aluminium impulsion grille with double deflection


WITHOUT REGISTER

RX 02 081RX 02 083RX 02 085RX 02 086RX 02 088RX 02 090RX 02 091RX 02 092RX 02 094RX 02 093RX 02 095RX 02 097RX 02 098

REDD 300 x 100 impulsion grilleREDD 400 x 100 impulsion grilleREDD 500 x 100 impulsion grilleREDD 300 x 150 impulsion grilleREDD 400 x 150 impulsion grilleREDD 500 x 150 impulsion grilleREDD 600 x 150 impulsion grilleREDD 700 x 150 impulsion grilleREDD 800 x 150 impulsion grilleREDD 300 x 200 impulsion grilleREDD 400 x 200 impulsion grilleREDD 500 x 200 impulsion grilleREDD 600 x 200 impulsion grille

13.27 15.61 17.25 15.57 18.61 20.95 26.18 29.44 32.73 18.63 22.74 26.31 30.90

WITH REGISTER

RX 02 003RX 02 004RX 02 005RX 02 006RX 02 007RX 02 009RX 02 011RX 02 013RX 02 014RX 02 015RX 02 016RX 02 017RX 02 019RX 02 021RX 02 022RX 02 023RX 02 025RX 02 027RX 02 029RX 02 030

REDD+RG 200 x 100 impulsion grilleREDD+RG 250 x 100 impulsion grilleREDD+RG 300 x 100 impulsion grilleREDD+RG 350 x 100 impulsion grilleREDD+RG 400 x 100 impulsion grilleREDD+RG 500 x 100 impulsion grilleREDD+RG 600 x 100 impulsion grilleREDD+RG 200 x 150 impulsion grilleREDD+RG 250 x 150 impulsion grilleREDD+RG 300 x 150 impulsion grilleREDD+RG 350 x 150 impulsion grilleREDD+RG 400 x 150 impulsion grilleREDD+RG 500 x 150 impulsion grilleREDD+RG 600 x 150 impulsion grilleREDD+RG 700 x 150 impulsion grilleREDD+RG 800 x 150 impulsion grilleREDD+RG 300 x 200 impulsion grilleREDD+RG 400 x 200 impulsion grilleREDD+RG 500 x 200 impulsion grilleREDD+RG 600 x 200 impulsion grille

20.27 22.57 24.92 26.48 28.46 31.84 35.72 22.98 25.38 27.41 30.29 32.15 36.99 42.37 49.18 54.63 30.63 36.37 42.08 50.34



191

ESCOCLIMA GRILLESMatt silver lacquered aluminium return grilles

Code Item €RX 02 233RX 02 235RX 02 237RX 02 239RX 02 241RX 02 243RX 02 244RX 02 245RX 02 246RX 02 247RX 02 249RX 02 251RX 02 253RX 02 254RX 02 255RX 02 257RX 02 259RX 02 261RX 02 265RX 02 267RX 02 269RX 02 271RX 02 277RX 02 279

RER 200 x 100 return grilleRER 300 x 100 return grilleRER 400 x 100 return grilleRER 500 x 100 return grilleRER 600 x 100 return grilleRER 200 x 150 return grilleRER 250 x 150 return grilleRER 300 x 150 return grilleRER 350 x 150 return grilleRER 400 x 150 return grilleRER 500 x 150 return grilleRER 600 x 150 return grilleRER 800 x 150 return grilleRER 200 x 200 return grilleRER 300 x 200 return grilleRER 400 x 200 return grilleRER 500 x 200 return grilleRER 600 x 200 return grilleRER 300 x 300 return grilleRER 400 x 300 return grilleRER 500 x 300 return grilleRER 600 x 300 return grilleRER 400 x 400 return grilleRER 600 x 400 return grille

11.49 13.13 14.77 16.62 18.81 12.50 13.77 14.77 16.08 17.04 19.27 21.81 25.80 16.53 16.59 19.27 21.98 24.66 20.20 24.19 29.44 33.77 28.35 42.28

Matt silver lacquered aluminium impulsion grille with double deflectionCode Item €

WITHOUT REGISTERRX 02 281RX 02 283RX 02 285RX 02 286RX 02 288RX 02 290RX 02 291RX 02 292RX 02 293RX 02 294RX 02 295RX 02 297RX 02 298

REDD 300 x 100 Impulsion grille double deflectionREDD 400 x 100 Impulsion grille double deflectionREDD 500 x 100 Impulsion grille double deflectionREDD 300 x 150 Impulsion grille double deflectionREDD 400 x 150 Impulsion grille double deflectionREDD 500 x 150 Impulsion grille double deflectionREDD 600 x 150 Impulsion grille double deflectionREDD 700 x 150 Impulsion grille double deflectionREDD 800 x 150 Impulsion grille double deflectionREDD 300 x 200 Impulsion grille double deflectionREDD 400 x 200 Impulsion grille double deflectionREDD 500 x 200 Impulsion grille double deflectionREDD 600 x 200 Impulsion grille double deflection

13.27 15.61 17.25 15.57 18.61 20.95 26.18 29.44 32.73 18.63 22.74 26.31 30.90

WITH REGISTERRX 02 203RX 02 204RX 02 205RX 02 206RX 02 207RX 02 209RX 02 211RX 02 213RX 02 214RX 02 215RX 02 216RX 02 217RX 02 219RX 02 221RX 02 222RX 02 223RX 02 225RX 02 227RX 02 229RX 02 230

REDD+RG 200 x 100 Impulsion grille double deflectionREDD+RG 250 x 100 Impulsion grille double deflectionREDD+RG 300 x 100 Impulsion grille double deflectionREDD+RG 350 x 100 Impulsion grille double deflectionREDD+RG 400 x 100 Impulsion grille double deflectionREDD+RG 500 x 100 Impulsion grille double deflectionREDD+RG 600 x 100 Impulsion grille double deflectionREDD+RG 200 x 150 Impulsion grille double deflectionREDD+RG 250 x 150 Impulsion grille double deflectionREDD+RG 300 x 150 Impulsion grille double deflectionREDD+RG 350 x 150 Impulsion grille double deflectionREDD+RG 400 x 150 Impulsion grille double deflectionREDD+RG 500 x 150 Impulsion grille double deflectionREDD+RG 600 x 150 Impulsion grille double deflectionREDD+RG 700 x 150 Impulsion grille double deflectionREDD+RG 800 x 150 Impulsion grille double deflectionREDD+RG 300 x 200 Impulsion grille double deflectionREDD+RG 400 x 200 Impulsion grille double deflectionREDD+RG 500 x 200 Impulsion grille double deflectionREDD+RG 600 x 200 Impulsion grille double deflection

20.27 22.57 24.92 26.48 28.46 31.84 35.72 22.98 25.38 27.41 30.29 32.15 36.99 42.37 49.18 54.63 30.63 36.37 42.08 50.34

White lacquered ceiling rotatory diffuserCode Item €

RX 01 102RX 01 101RX 01 103RX 01 104

XN-600-24 Ceiling rotatory diffuserXN-600-36 Ceiling rotatory diffuserXN-600-48 Ceiling rotatory diffuserXN-600 Ø250 Plenum box for ceiling rotatory diffuser

50.47 51.50 54.59 49.44Plenum



CIRCULAR DIFFUSERCode Item €

RX 01 131RX 01 132RX 01 133RX 01 134RX 01 135

• WHITE lacquered aluminium diffuser• Black plastic damper• With assembly clipØ150 mm diffuserØ200 mm diffuserØ250 mm diffuserØ300 mm diffuserØ350 mm diffuser

20.25 25.29 29.59 39.67 45.90

RX 01 136RX 01 137RX 01 138RX 01 139RX 01 140

• Silver anodized aluminium diffuser• Black plastic damper• Includes mounting frameØ150 mm diffuserØ200 mm diffuserØ250 mm diffuserØ300 mm diffuserØ350 mm diffuser

22.40 25.29 30.84 39.67 47.68

FLEXIBLE MOUNTING FRAMERX 01 141RX 01 142RX 01 143RX 01 144RX 01 145

DS D.150 Flexible mounting frame for diffuserDS D.200 Flexible mounting frame for diffuserDS D.250 Flexible mounting frame for diffuserDS D.300 Flexible mounting frame for diffuserDS D.350 Flexible mounting frame for diffuser

4.57 5.04 5.73 6.87 9.16

EXTRACT PLASTIC DISC VALVES Code Item €

RP 03 001RP 03 002RP 03 003RP 03 004

E-100 BALANCEE-125 BALANCEE-150 BALANCEE-200 BALANCE

8.8811.4113.9520.28

EXTRACT METALLIC DISC VALVESCode Item €

RP 04 001RP 04 002RP 04 004RP 04 005

• Steel with white epoxy coatingSR-100 valveSR-125 valveSR-160 valveSR-200 valve

7.479.79

12.1017.41

STAINLESS STEEL VALVESVS series

Code Item €

RP 07 001RP 07 002RP 07 003RP 07 004

• For air outlet and extraction• Air flow adjustable by turning the control disc• Includes mounting frameVS100VS125VS150VS200

14.3216.7921.3040.58

VLA series

Code Item Q(4m/s)m³/h A B C D €

• For air outlet and extraction• With flyscreen, blades, fixing clips, shut-off

valve/rubber joints• For interior and exterior use• Maximum air passing

RP 07 011RP 07 012RP 07 013RP 07 014

VLA100VLA125VLA150VLA200

6080

125160

97120145195

150190210270

52526274

125145165205

15.7619.0623.4351.91

INCLUDES MOUNTING NECK!

INCLUDES MOUNTING NECK!

Neck

Neck



193

OUTLET GRILL WITH CURVED BLADESWHITE lacquered aluminum


RX 02 403

RX 02 404

RX 02 405

RX 02 406

RX 02 407

RX 02 408

RX 02 409

RX 02 410

RX 02 411

RX 02 412

RX 02 413

RX 02 414

RX 02 416

RX 02 417

RX 02 418

RX 02 419

RELC + RG 200x100 Impulsion grille ceiling, curved blades, lacquered regulation RAL-9016
















17.19

20.69

24.18

27.59

31.10

19.49

21.53

23.54

25.75

27.68

31.86

35.99

21.77

26.55

31.29

36.03

AIR RETURN GRILL TO REPLACE CEILING PLATECode Description €

RX 01 105

RX 01 106

RX 01 107

RX 01 108

Air return grille fixed slant blades 45° 595x595 white

Air return grille square netting 595x595 white

Air return grille slant square netting 45° 595x595 white

Air return grille fixed slant blades 45° 595x595Matt silver lacquered

52.90

46.56

58.02

52.90



LONG RANGE JET NOZZLES- Long range jet nozzles to install on the wall- Standard finish in white RAL 9016, gray lacquered on request M9006

Code Item €RX 01 150RX 01 151RX 01 152RX 01 153RX 01 154RX 01 155

Long range jet nozzle diam. 125 model JN-S TIPO B RAL9016Long range jet nozzle diam. 160 model JN-S TIPO B RAL9016Long range jet nozzle diam. 200 model JN-S TIPO B RAL9016Long range jet nozzle diam. 250 model JN-S TIPO B RAL9016Long range jet nozzle diam. 315 model JN-S TIPO B RAL9016Long range jet nozzle diam. 400 model JN-S TYPE B RAL9016

43.05 45.85 59.64 77.97

113.56 149.87

STANDARD RAILS- Linear elements to form a CM mounting frame for grilles.- Made of galvanized steel.

SPECIAL RAILS- 25 mm special rails for returns in the partition walls.

- 100 mm long rail to install at the duct end through the partition wall.

Code Model €RM 58 061RM 58 062RM 58 063RM 58 064RM 58 065

CM 100 25 mmCM 150 25 mmCM 200 25 mmCM 250 25 mmCM 300 25 mm

0.710.770.830.870.93

Code Model €RM 58 081RM 58 082RM 58 083RM 58 084RM 58 085RM 58 086RM 58 087

CM 100 100 mmCM 150 100 mmCM 200 100 mmCM 250 100 mmCM 300 100 mmCM 350 100 mmCM 400 100 mm

1.301.421.511.641.821.952.07

Code Model €RM 58 002RM 58 003RM 58 004RM 58 005RM 58 006RM 58 007RM 58 008RM 58 009RM 58 010RM 58 011RM 58 012

CM 75CM 100CM 125CM 150CM 200CM 250CM 300CM 350CM 400CM 450CM 500

0.440.450.500.500.590.650.730.780.850.920.98

Code Model €RM 58 013RM 58 014RM 58 016RM 58 018RM 58 020RM 58 022RM 58 024RM 58 026RM 58 028RM 58 030RM 58 032

CM 550CM 600CM 700CM 800CM 900CM 1000CM 1100CM 1200CM 1300CM 1400 CM 1500

1.411.151.361.491.531.792.512.763.383.683.94

Code Model €RM 58 066RM 58 067RM 58 068RM 58 069RM 58 071

CM 350 25 mmCM 400 25 mmCM 450 25 mmCM 500 25 mmCM 600 25 mm

1.021.141.211.271.39

Code Model €RM 58 088RM 58 089RM 58 091RM 58 092RM 58 093RM 58 094RM 58 095

CM 450 100 mmCM 500 100 mmCM 600 100 mmCM 700 100 mmCM 800 100 mmCM 900 100 mmCM 1000 100 mm

2.192.322.632.843.213.433.62



195

CONTROL AND REGULATIONCode Item €

AMBIENT THERMOSTAT

CO 14 700CO 02 010

• Range: +5 to 30 °C• Rupture power: 16 (2.5) A 250 V• Difference: 1K• Dimensions: 79.6 x 79.6 x 44.15 mmHeat commuter MC3Front base MC3

9.001.15

DIGITAL THERMOSTAT

CO 14 550

• Range: 5 to 30 °C• Differential: ± 0.5 °C• Minimum ignition time:

- heat mode: 1 min- air conditioner mode: 3 min

• Power source: 2 alkaline batteries 1.5 V• Contact: 5 A (R) and 2 A (IN)• Low battery indicator• Sizes: 114 x 75 x 30 mmMundocontrol HD-210 (batteries not included) 25.00

DIGITAL WEEKLY CRONOTHERMOSTAT

CO 14 555

• Range: 5 to 30 °C• Differential: ± 0.5 °C• Vacations program (7 °C)• Minimum ignition time:

- heat mode: 1 min- air conditioner mode: 3 min

• Power source: 2 alkaline batteries 1.5 V• Contact: 6 A (R) and 2 A (IN)• Sizes: 130 x 84 x 30 mmMundocontrol HP-510 (batteries not included) 28.00

* CONSULT for Commuted Contact.

THERMOSTAT AND CHRONOTHERMOSTAT VIA RADIOCode Item €

TD1RF DIGITAL THERMOSTATVIA RADIO

CO 14 560

• Range from 5 to 35 °C• 3 keys easy to use• Backlit display• Power supply: 2 batteries 1.5 V• 230 V 50 Hz receptorTD1RF thermostat 74.00

CD7RF DIGITAL CHRONOTHERMOSTATVIA RADIO

CO 14 561

• Range from 5 to 35 °C• 5 keys easy to program• Backlit display• Power supply: 2 batteries 1.5 V• 230 V 50 Hz receptor• 4 daily periods (5+1+1)CD7RF chronothermostat 108.00

Heating

Heating



THERMOSTATS FOR FAN COIL UNITCode Item €

THERMOSTAT FOR FAN COIL UNIT

CO 14 653

• Range: -10 to 30 °C• Accuracy: 1 °C• 2 A 230 V rupture power• Dimensions: 85 x 130 x 40 mm• 3 speeds selector/ON-OFF/Winter/SummerSE-3-FAN thermostat 28.00

ANALOGICAL

CO 14 200CO 14 201

• Range: 10 to 30 °C• Power supply: 230 V• Differential: 1.5 °C• SPST 230bV ~ 2 (1) A contact• Mode: Cooling / Heating / OFF• 3 speeds• Operation frontal LED

SET POINT MODETF2T Fan OFF 2 pipesTF4T Fan ON 4 pipes

31.0038.00

DIGITAL SURFACE

CO 14 210CO 14 211

• Range: 5 to 35 °C• Power supply: 230 V 50-60 Hz• Contact: SPST 2 (1) A 230-50 Hz• Differential: ± 1 °C• Backlit LCD display• 3 speeds / OFF• Mode: Cooling / Heating / Ventilation - Manual shift

SET POINT MODETFDS2T Fan ON 2 pipesTFDS4T Fan ON 4 pipes

57.0071.00

DIGITAL TO EMBED

CO 14 205CO 14 206

• Range: 5 to 35 °C• Power supply: 230 V 50-60 Hz• Differential: ± 1 °C• Contact: SPST 2 (1) A 230 V• ON/OFF mode• 3 speeds key• Mode: Cooling / Heating • Backlit display

SET POINT MODETFDE2T Fan OFF 2 pipesTFDE4T Fan ON 4 pipes

62.0071.00

DAMPER ACTUATORSCode Model €

ALL / NOTHING of 6 Nm

CO 22 703CO 22 704

TD 06-24VTD 06-230V

80.0084.65

ALL / NOTHING of 10 Nm

CO 22 705CO 22 706

TD 10-24VTD 10-230V

100.00105.00



197

Summer Winter

FN-48

FN-42

TOUCH SCREEN THERMOSTATSESCO-TOUCH Series

Touch thermostat

Code Item €

CO 14 004

• Control range: +5/+30 °C• Adjustable thermal differential: ± 0.2 to ± 2 °C• Power supply: 2 alkaline batteries 1.5 AAA• Rupture power: 230 V (5 A)• Backlit display• Switched contact

T-TOUCH thermostat 66.00

Touch weekly chronothermostat

Code Item €

CO 14 005

• Control range: +5/+30 °C• Adjustable thermal differential: ± 0.2 to ± 2 °C• Power supply: 2 alkaline batteries 1.5 AAA• Rupture power: 230 V (5 A) l• Backlit display• Switched contact

BLUE-TOUCH chronothermostat 102.00

SURFACE DIGITAL THERMOSTATSCode Item €

CO 14 659

• Range: -50 to 150 °C• Resolution: 1 °C• Power supply: 230 Vac 50-60 Hz• PTC probe (included) • 16 A switched contact• Operation indication by relay light spotFN-48 thermostat

* CHECK for Switching Contact.

59.00

CO 14 652

• Temperature: Cooling or Heating depending on configuration• Range: -50 to +150 °C• Power supply: 100-240 V 50-60 Hz• 1 relay output 14 A switched• PTC included probeFN-42 thermostat 63.00

SURFACE DIGITAL THERMOMETERCode Item €

CO 14 661

• Range: -50 to 150 °C• Resolution: 1 °C• Power supply: 230 Vac, 50-60 Hz• PTC probe (included)

FN-49 thermometer 45.00



THERMOMETERS-THERMOSTATSMod. IS 200-T- Self-extinguishing plastic of standard format (74 x 32 x 64 mm).- Contactor: SPDT16 (6) Amp.- IP-65 front.- Power supply: 230VAC.- Measuring range: -50 a +150 °C. Cold or heat with defrost function.- Sensor inlet: 1 for NTC/PTC sensor (selected by parameters).- Visualization: 3 and a half digits display with automatic signaling

of the compressor and defrost operation.

Code Model €

CF 31 001 MUNDOCONTROL IS 200T (NTC included probe)5+ pieces10 pieces box

37.6036.60/pc.35.60/pc.

CO 35 002 PTC silicone probe -50 a +140 °C (optional) 12.58

Mod. IDW 961- IP-65 frontal protection.- Contactor: SPDT 8 (3) Amp.- Box: plastic body with resin PC+ABS/UL94 V-O. Polycarbonate display.

Thermoplastic resin keys.- 74 x 32 mm frontal, 60 mm deep.- Display field: -50 °C to +99 °C in 3 digits + sign screen.- Analog input: one PTC or NTC input (selected by parameter).

Code Model €

CF 32 003 ESCOFRED IDW 961 (Included probe)5+ pieces10+ pieces

37.9036.9035.90

OPTIONAL: KEY PROGRAMMING- Memory card => tool: “dL” function (download)

Download to the instrument the parameters and operatingmode of the programming key (memory card).

- Tool => Memory card: “UL” function (Upload)Stores instrument parameters given to the memory card.

Code Model €

CO 32 005 COPY-CARD programming key 51.30

Cooling

Code Item €

CO 31 950CO 31 951

• Front dimensions: 120 x 74 x 32 mm deep• Cooling/Heating• Decimal point• Display in blue• NTC-1 included probes• NTC/PTC configurable• 8 Amp. relay• Copy key

Wall 1 (1 relay)Wall 3 (3 relays)

58.3091.00

POWER SUPPLY

OUTLET

OUTLET WATER INLET

SONDA1

TERMINAL BLOCK1-2: N.C. compressor relay1-3: N.A. relay, compressor relay6-7: Power supply8-9: Sensor probeA: TTL Inlet for COPY-CARD

(memory card)

ELECTRICAL CONNECTIONIDW 961 - 230V



199

UNIVERSAL REMOTE CONTROL FOR SPLITSIt allows to control the majority of the splits market.It is required to select the brand code of the equipment.

Code Item €

CO 14 903 Universal remote control 40.00

«CLIMA FRESH»AIR FRESHENER TABLETS

Code Model €

• Air freshener tablets to put inside air conditioners• Barely visible, to be placed inside the split or

fan coil unit.

HF 18 401HF 18 402HF 18 403HF 18 404

Red color (FRESH AIR scent)Yellow color (VANILLA scent)Purple color (WELLBEING scent)Green color (GREEN APPLE scent)

2.902.902.902.90

HF 18 400 Carton display case• Display with 10 tablets each (total 40) 110.00

Dehumidification

Cooling

Automaticoperation

Programmedtemperature

Code

Start / Stop key

Mode selectionkey

Air flow selectionkey

Code selectionkey

Confirmation key

Insert the tip of the pencilto erase values

(Reset) and selectagain the model

Fan

Heating

Fan speedAUTO-high-medium-low

Swingindicator

Emission indicator

Press once to increasetemperature 1 °C

Press once to decreasetemperature -1 °C

Automatic airflow buttonAir flow directionbutton

Timeron

TimeroffIncrease (+) / Decrease (-)code or timeInsert pencil end to settime on clock

COMPATIBLE BRANDS

ALPIN LG

CARRIER MACQUAY

CORONA MIDEA

CHANG HONG MITSUBISHI

CHIGO MOVAIR

CHOFU MUNDOCLIMA

DAIKIN PANASONIC

DONG BAO PANDA

ELECTROLUX PHILCO

FAN WORLD RAYBO

FUJITSU SAMPO

GOLDSTAR SAMSUNG

GREE SANYO

GUQIAO SEI

HAIER SHARP

HITACHI SHINCO

HUAO BAO SOVA

HUIFENG TOSHIBA

HYUNDAI TRANE

JDC WHIRLPOOL

JOHNSON XILENG

KLIMATAIR YORK

I N N O V A T I O N F O R C O N F O R T

RANGE 2017Domestic and Commercial Air Conditioning

Variable FlowHydronic Range

Heat Recovery UnitsAir Curtains

DehumidifiersAir Purifiers

WHY ?

Because we have the best value for money on the market. We do not have to pay for expensive television commercials, billboards or newspapers advertising,and our customers benefit directly from this.

Because we offer the best post-sale technical support of the national territory with full coverage, without902 phones numbers type that charge when you havea problem.

Because for us the most important thing is the satisfaction of our client and we do everything possible to ensure it.

Because we have been air conditioning homes in Spain and the rest of Europe for more than 40 years and we want to continue doing so in the future.

And above all this.....because we are from here. We are a team made up of more than 500 professionals and our name is easy to understand, MUNDOCLIMA, it is not a Japanese brand that nobody knows what it means.

Because we are environmentally friendly and we wantto help for the protection of the ozone layer. We wantto make sure that penguins and polar bears continueto share our planet with us and therefore we only use environmentally friendly refrigerants and equipments rated “Class A” on the energy efficiency scale.



WALL SPLIT INVERTER H6 AND H7

Code ModelCapacity (W)

€Cooling Heating

R-410A

CL 20 015CL 20 016CL 20 017CL 20 018

MUPR-09-H6MUPR-12-H6MUPR-18-H6MUPR-24-H6

2,6303,5105,2707,030

2,9303,8105,5607,620

625.00657.00

1,129.001,465.00

R-32

CL 20 035CL 20 036CL 20 037CL 20 038

MUPR-09-H7MUPR-12-H7MUPR-18-H7MUPR-24-H7

2,6303,5105,2707,320

2,9304,1005,5607,610

637.00669.00

1,152.001,494.00

Data Sheet page 215 and 219

WALL SPLIT INVERTER H5A


€Cooling Heating

CL 20 025CL 20 026CL 20 027CL 20 028

MUPR-09-H5AMUPR-12-H5AMUPR-18-H5AMUPR-24-H5A

2,5003,5005,1007,000

2,6003,5005,3007,300

567.00588.00

1,024.001,323.00

Data Sheet page 217

MULTISPLIT INVERTER H6


€Cooling Heating

OUTDOOR UNITS

CL 20 440CL 20 441CL 20 442CL 20 443CL 20 444CL 20 445CL 20 446

MUEX-14-H6.2 (2×1)MUEX-18-H6.2 (2×1)MUEX-21-H6.3 (3×1)MUEX-27-H6.3 (3×1)MUEX-28-H6.4 (4×1)MUEX-36-H6.4 (4×1)MUEX-42-H6.5 (5×1)Data Sheet page 221

4.100 5.200 6.300 7.900 8.21010.60012.300

4.400 5.500 6.700 8.200 8.90011.10012.300

1,032.001,224.001,405.001,580.001,974.002,578.002,948.00

WALL INDOOR UNITS

CL 20 450CL 20 451CL 20 452CL 20 453

MUPR-09-H6MMUPR-12-H6MMUPR-18-H6MMUPR-24-H6MData Sheet page 224

2,6303,5105,2707,030

2,9303,8105,5607,620

221,00233,00349,00412,00

CASSETTE INDOOR UNITS

CL 20 454CL 20 455

MUCSR-12-H6MMUCSR-18-H6MData Sheet page 225

3,6005,200

3,8005,600

688,00788,00

DUCT INDOOR UNITS

CL 20 456CL 20 457

MUCR-12-H6MMUCR-18-H6MData Sheet page 226

3,6005,200

3,8005,600

615,00672,00

*For higher capacities check our MVD range.

RangePREMIUM

RangeTACTIC

Gas

R32More

Ecological



203



€Cooling Heating

OUTDOOR UNITS

CL 20 810

CL 20 811

CL 20 812

CL 20 813

MUEX-18 H3.2 (2x1)

MUEX-24 H3.3 (3x1)

MUEX-28 H3.4 (4x1)

MUEX-42 H3.5 (5x1)

5,000

7,000

8,100

11,500

5,600

8,000

9,200

13,000

1,313.00

2,028.00

2,165.00

3,430.00

INDOOR UNITS CONSOLE

CL 20 827

CL 20 828

MUCNR-09-H3M

MUCNR-12-H3M

2,700

3,300

2,900

3,400

818.00

864.00

INDOOR UNITS FLOOR-CEILING

CL 20 832

CL 20 833

MUSTR-18-H3M

MUSTR-24-H3M

5,000

6,600

5,100

7,000

843.00

1,058.00

DUCT INDOOR UNITS

CL 20 837

CL 20 838

MUCR-21-H3M

MUCR-24-H3M

6,000

6,600

6,200

7,000

944.00

1,046.00

* While stock last.

Data Sheet page 228

INVERTER CASSETTE SPLIT H6


€Cooling Heating

CL 20 230

CL 20 231

CL 20 232

CL 20 233

CL 20 234

CL 20 235

CL 20 236

CL 20 237

CL 20 238

MUCSR-12-H6

MUCSR-18-H6

MUCSR-24-H6

MUCSR-30-H6

MUCSR-36-H6

MUCSR-42-H6

MUCSR-48-H6

MUCSR-48-H6T (Three ph.)

MUCSR-60-H6T (Three. ph.)

3,520

5,270

7,030

8,790

10,550

12,010

14,060

13,770

15,830

4,100

5,570

7,030

9,080

11,130

13,480

16,120

15,530

18,170

1,733.00

2,072.00

2,535.00

2,842.00

3,566.00

3,606.00

3,997.00

3,997.00

4,276.00

TWIN SYSTEM CASSETTE (2x1)

CL 20 924

CL 20 925

CL 20 926

CL 20 927

MUCSR-18X2-H6

MUCSR-24X2-H6

MUCSR-24X2-H6T (Three ph.)

MUCSR-30X2-H6T (Three. ph.)

5,270+5,270

6,900+6,900

7,030+7,030

8,790+8,790

5,570+5,570

7,730+7,730

7,030+7,030

9,080+9,080

3,451.00

4,573.00

4,573.00

4,740.00

Data Sheet page 232 system Twin page 236



INVERTER DUCTED SPLIT H6


€Cooling Heating

CL 20 250CL 20 251CL 20 252CL 20 253CL 20 254CL 20 255CL 20 256CL 20 257CL 20 258

MUCR-12-H6MUCR-18-H6MUCR-24-H6 MUCR-30-H6 MUCR-36-H6 MUCR-42-H6 MUCR-48-H6 MUCR-48-H6T (Three-ph.)MUCR-60-H6T (Three. ph.)

3,520 5,280 7,030 8,79010,55012,02014,07014,07015,820

3,810 5,570 7,030 9,38011,13013,48016,12016,12018,170

1,557.00 2,070.002,639.002,788.003,536.003,582.003,828.003,828.004,233.00

DUCTED TWIN SYSTEM (2x1)

CL 20 928CL 20 929CL 20 930CL 20 931

MUCR-18X2-H6MUCR-24X2-H6MUCR-24X2-H6T (Three ph.)MUCR-30X2-H6T (Three. ph.)

5,280+5,2807,030+7,0307,030+7,0308,790+8,790

5,570+5,5707,030+7,0307,030+7,0309,380+9,380

3,243.004,164.004,164.004,300.00

Data Sheet page 242, Twin system page 246

HIGH CAPACITY DUCT INVERTER SPLIT H6 AND H7


€Cooling Heating

H6 SERIES (Three ph.) - Outdoor unit front discharge

CL 23 904CL 23 905CL 23 906CL 23 912CL 23 913

MUCHR-20-H6MUCHR-22-H6MUCHR-26-H6MUCHR-40-H6MUCHR-45-H6

19,66022,53025,95038,96041,350

19,86022,18025,78043,95045,380

6,052.006,480.006,590.00

10,303.0011,493.00

H6A SERIES (Three ph.) - Outdoor unit front discharge

CL 23 907CL 23 909CL 23 910CL 23 911

MUCHR-28-H6AMUCHR-40-H6AMUCHR-45-H6AMUCHR-56-H6A

27,50039,32044,23054,400

28,24040,63045,15057,480

9,162.0012,541.0013,256.0016,064.00

H7 SERIES (Three ph.) - Ut. - Outdoor unit front discharge

CL 20 259 MUCHR-96-H7T 28,000 31,500 8,000.00

Data Sheet page 247, 248 and 249

FLOOR/CEILING INVERTER SPLIT H6


€Cooling Heating

CL 20 241CL 20 242CL 20 243CL 20 244CL 20 245CL 20 246CL 20 247CL 20 248

MUSTR-18-H6MUSTR-24-H6 MUSTR-30-H6 MUSTR-36-H6 MUSTR-42-H6 MUSTR-48-H6 MUSTR-48-H6T (Three-ph.)MUSTR-60-H6T (Three. ph.)

5,280 7,030 8,79010,55012,31014,07014,07015,820

5,670 7,030 9,38011,13013,50016,41016,41018,170

2,057.002,600.002,811.003,510.003,593.003,879.003,879.004,115.00

FLOOR/CEILING TWIN SYSTEM (2x1)

CL 20 932CL 20 933CL 20 934CL 20 935

MUSTR-18X2-H6MUSTR-24X2-H6MUSTR-24X2-H6T (Three ph.)MUSTR-30X2-H6T (Three. ph.)

5,280+5,2807,030+7,0307,030+7,0308,790+8,790

5,670+5,6707,030+7,0307,030+7,0309,380+9,380

3,830.004,618.004,618.004,840.00

Data Sheet page 237, Twin system page 241

+

++



205

Window kit included

COLUMN SPLIT H6


€Cooling Heating

HEAT PUMP (Three ph.)

CL 20 390CL 20 391

MUCO-48-H6TMUCO-60-H6T

12,31015,000

12,31017,500

3,045.003,528.00

Data Sheet page 250

WINDOW AIR CONDITIONER


€Cooling

ONLY COOLING

CL 20 380CL 20 381

MUVR-09-C6MUVR-12-C6

2,7843,517

662.00709.00

Data Sheet page 251

AIR CONDITIONER WITHOUT OUTDOOR UNIT


€Cooling Heating

• Hole diameter: 162 mm• Includes EPDM outdoor grilles (patented)• Remote control and front display• Anti-odor filter and anti-bacterial filter• Built-in control panel• Gas: R-410A

CL 19 782 MU-WZ32 3,438 3,762 1,709.00

• Hole diameter: 162 mm• Remote control and display• Outdoor invisible grille• Anti-odor filter and anti-bacterial filter• 3 speeds + Auto• Gas: R-410A

CL 19 779CL 19 780

METRO-10HPMETRO-12HP

2,4102,750

2,3502,550

1,365.001,560.00

MU-WZ32 Data Sheet page. 252

PORTABLE AIR CONDITIONERS MONOBLOC UNIT


€Cooling Heating

• With outdoor discharge tube• Automatic removal

of condensed water• Fan function• Dehumidification• Gas: R-410A

CL 20 006CL 20 007CL 20 008

MUPO-07-C6 Cool onlyMUPO-09-H6 Heat pumpMUPO-12-H6 Heat pump

2 0502 6003 500

–2 6003 300

450.00688.00735.00

Data Sheet page 253

Gas

R32More

Ecological

MUPO-C6 MUPO-H6



WIFI MODULEMUPR-H6, MUPR-H6M and MUPR-H7 SeriesControl your MUNDOCLIMA air conditioner from your mobile phone.

- ON / OFF operation.

- Selection of operation mode.

- Adjustment of target temperature.

- Selection of fan speed.

- ECO mode activation.

- Horizontal blade adjustment.

- Weekly timer, it schedule the starts and stops fromthe equipment weekly.

- Heating function to 8 °C, if you are not home andthe room temperature es less than 8 °C, the equipment will start automatically in heating.

- Adjustable night mode, it sets the desired temperature variations during the night.

- Checking function, it allows to see if the equipment has a problem and which is the problem.

Operating screen Functions screens Night mode function Checking function

Download application Installation

Code Model €

CL 94 382 WIFI Module MUPR-H6,MUPR-H6M and MUPR-H7 Series 50.00

WIFI Module Plug & Play

NetHome Plus

Notes:(1) In all cases (Split 1x1 or Multi Split) Wifi module is required by indoor unit.(2) In every user account multiple equipments can be registered and in that way to monitor them.(3) Each unit can only be registered in one user account.

Insert



207

WIFI CONTROL MODULE FOR AIR CONDITIONING

The intelligent tado° climate control connects your Smartphone directly with the air conditioner. Through the location of your Smartphone the air conditioner will be automatically switched on when you enter or switched off when you leave the house. Allowing you to control your air conditioner from wherever you are.

Features:

Geolocation: tado° automatically adjusts the AC based on your location: cool before you get home, saving when you're away.

For any air conditioner with remote control: The tado° Smart AC Control works with all remote-controlled air conditioners and controls them via IR - just like your old remote control.

Customized behavior: 2 hours on at 24 °C, then off until 6 am followed by 2 hours at 22 °C - tado° lets you fully adapt your AC cycling during the day, the night and when there is nobody at home.

Advantages:

Easy comfort: Have your home always at the perfect temperature - no schedules, no teaching, no need to remember to turn it off. tado° does all the work automatically.

Control from anywhere: No matter where you are, on the train or at work, with the tado° App on your phone you always know what the temperature at home is and you can easily change any setting.

Easy to install: tado° Smart AC Control connects to your home Wifi, no additional device is needed. The tado° Smart AC control can be mounted on the wall or placed on a desk or where you wish.

Save energy and costs: See how much you save every day, what the temperature is at home and when your AC is turned on. Save up to 40% on your energy bill, tado° can pay for itself in less than a year.

Code Model €

CO 14 910 tado° WI-FI Module 225.00

MOMIT COOL - WIFI CONTROL MODULEFOR AIR CONDITIONING

Code Model €

CO 28 130 WIFI MOMIT COOL Starter Kit (Gateway + Module) 128.40

CO 28 132 Additional module 84.00

Control your air conditioner unit using iPhone, iPad, Android.

MOMIT COOL is a device that allows your air conditioning has Cool features to give you comfort and maintain the perfect temperature in the simplest way.

• Remote control from mobile phone• Geolocation• Cooling and heating• Power supply: battery 1.5 V• Weather forecast• Easy to install• Humidity sensor and temperature.

• It monitors energy consumption through real-time statistics.

• My budget (App to set a monthly budget for energy expenditure).

• We can connect 20 modules through one gateway.



VARIABLE FLOW RATEInverter Mini MVD V4+ Outdoor units

Code ModelCapacity (kW)

€Cooling Heating

MINI MVD V4+ (Single-ph.)

CL 23 260 MVD-V80W/DN1 7.2 9 2,077.00

CL 23 261 MVD-V105W/DN1 9 11.2 2,665.00

CL 23 262 MVD-V120W/DN1 12.3 13.2 2,872.00

CL 23 263 MVD-V140W/DN1 14 15.4 3,027.00

CL 23 264 MVD-V160W/DN1(B) 15.5 17 3,082.00

MINI MVD V4+ (Three-ph.)

CL 23 265 MVD-V120W/DRN1 12.3 13.2 2,872.00

CL 23 266 MVD-V140W/DRN1 14 15.4 3,027.00

CL 23 267 MVD-V160W/DRN1 15.5 17 3,082.00

CL 23 268 MVD-V180W/DRN1 17.5 19 3,374.00

CL 23 269 MVD-V200W/DRN1 20 22 4,132.00

CL 23 270 MVD-V224W/DRN1 22.4 24.5 4,220.00

CL 23 271 MVD-V260W/DRN1 26 28.5 4,430.00

CL 23 272 MVD-V400W/DRN1 40 45 7,026.00

CL 23 273 MVD-V450W/DRN1 45 50 8,064.00

Outdoor units Inverter Maxi MVD 2 pipes V5X


€Cooling Heating

MAXI MVD 2 Pipes V5X (Three-ph.)

CL 23 300 MVD-V5X252W/V2GN1 25.2 27 6,805.00

CL 23 301 MVD-V5X280W/V2GN1 28 31.5 7,002.00

CL 23 302 MVD-V5X335W/V2GN1 33.5 37.5 8,373.00

CL 23 303 MVD-V5X400W/V2GN1 40 45 9,264.00

CL 23 304 MVD-V5X450W/V2GN1 45 50 9,827.00

CL 23 305 MVD-V5X500W/V2GN1 50 56 10,969.00

CL 23 306 MVD-V5X560W/V2GN1 56 63 12,438.00

CL 23 307 MVD-V5X615W/V2GN1 61.5 69 14,084.00

Outdoor units Inverter Maxi MVD 3 pipes VR4+


€Cooling Heating

MAXI MVD 3 Pipes VR4+ (Three-ph.)

CL 23 115 MVD-252(8)W/D2RN1T(C) 25.2 27 8,616.00

CL 23 116 MVD-280(10)W/D2RN1T(C) 28 31.5 8,683.00

CL 23 117 MVD-335(12)W/D2RN1T(C) 33.5 37.5 8,727.00

CL 23 118 MVD-400(14)W/D2RN1T(C) 40 45 10,108.00

CL 23 119 MVD-450(16)W/D2RN1T(C) 45 50 10,273.00

More information page: 254

Mini MVD V4+

Maxi MVD 2 pipes V5X

Maxi MVD 3 pipes VR4+

RangePREMIUM



209

VARIABLE FLOW RATECassette Indoor Units


€Cooling Heating

CASSETTE 4 WAYS COMPACTCL 23 330CL 23 331CL 23 332CL 23 333

MVD-22Q4/DHN1-A3MVD-28Q4/DHN1-A3MVD-36Q4/DHN1-A3MVD-45Q4/DHN1-A3

2.22.83.64.5

2.43.245

670.00685.00710.00770.00

CASSETTE 4 WAYS DCCL 23 323CL 23 324CL 23 325CL 23 326CL 23 327CL 23 328

MVD-56Q4/DHN1-DMVD-71Q4/DHN1-DMVD-80Q4/DHN1-DMVD-90Q4/DHN1-DMVD-112Q4/DHN1-DMVD-140Q4/DHN1-D

5.67.189

11.214

6.389

1012.515

840.001,010.001,090.001,110.001,240.001,310.00

Duct Indoor Units


€Cooling Heating

LOW SILHOUETTE DUCT DCCL 23 370CL 23 371CL 23 372CL 23 373CL 23 374CL 23 375CL 23 376CL 23 377CL 23 378CL 23 379

MVD-22T2/DHN1-DA5MVD-28T2/DHN1-DA5MVD-36T2/DHN1-DA5MVD-45T2/DHN1-DA5MVD-56T2/DHN1-DA5MVD-71T2/DHN1-DA5MVD-80T2/DHN1-BA5MVD-90T2/DHN1-BA5MVD-112T2/DHN1-BA5MVD-140T2/DHN1-BA5

2.22.83.64.55.67.189

11.214

2.63.245

6.389

1012.515.5

505.00520.00580.00630.00650.00660.00800.00870.00910.00950.00

HIGH PRESSURE DUCT DCCL 23 380CL 23 381CL 23 382CL 23 383

MVD-160T1/DHN1-BMVD-200T1/DHN1-BMVD-250T1/DHN1-BMVD-280T1/DHN1-B

16202528

1722.526

31.5

1,200.001,920.002,060.002,160.00

HIGH PRESSURE DUCT D4+CL 23 184CL 23 185CL 23 186

MVD-D400T1/N1MVD-D450T1/N1MVD-D560T1/N1

404556

455063

3,277.003,429.003,626.00

Duct indoor units 100% outdoor air


€Cooling Heating

100% OUTDOOR AIR DUCT DC*CL 23 390 MVD-125T1/DHN1-FA 12.5 10.5 1,270.00CL 23 391 MVD-140T1/DHN1-FA 14 12 1,330.00CL 23 392 MVD-200T1/DHN1-FA 20 18 2,150.00CL 23 393 MVD-250T1/DHN1-FA 25 20 2,210.00CL 23 394 MVD-280T1/DHN1-FA 28 22 2,240.00

Indoor Units Floor-Ceiling


€Cooling Heating

FLOOR-CEILING DCCL 23 400 MVD-36DL/DHN1-C 3.6 4 620.00CL 23 401 MVD-45DL/DHN1-C 4.5 5 670.00CL 23 402 MVD-56DL/DHN1-C 5.6 6.3 690.00CL 23 403 MVD-71DL/DHN1-C 7.1 8 720.00CL 23 404 MVD-80DL/DHN1-C 8 9 790.00CL 23 405 MVD-90DL/DHN1-C 9 10 820.00CL 23 406 MVD-112DL/DHN1-C 11.2 12.5 980.00CL 23 407 MVD-140DL/DHN1-C 14 15.5 1,030.00

*Check availability.

Cassette 4 ways compact DC

Cassette 4 ways DC

Low silhouette duct DC

High pressure duct DC

100% outdoor air duct DC

Floor-Ceiling DC

High pressure duct D4+



VARIABLE FLOW RATEWall Split Indoor Units


€Cooling Heating

WALL SPLIT DC

CL 23 410 MVD-22G/DHN1-M 2.2 2.4 540.00CL 23 411 MVD-28G/DHN1-M 2.8 3.2 555.00CL 23 412 MVD-36G/DHN1-M 3.6 4.0 570.00CL 23 413 MVD-45G/DHN1-M 4.5 5.0 630.00CL 23 414 MVD-56G/DHN1-M 5.6 6.3 660.00CL 23 415 MVD-71G/DHN1-M 7.1 8.0 775.00CL 23 416 MVD-80G/DHN1-M 8.0 9.0 790.00

WALL SPLIT D4+

CL 23 213 MVD-D45G/N1YB 4.5 5 593.00CL 23 214 MVD-D56G/N1YB 5.6 6.3 612.00

Indoor Units Console


€Cooling Heating

CONSOLE DC*

CL 23 420 MVD-22Z/DHN1-B 2.2 2.6 525.00CL 23 421 MVD-28Z/DHN1-B 2.8 3.2 550.00CL 23 422 MVD-36Z/DHN1-B 3.6 4 570.00CL 23 423 MVD-45Z/DHN1-B 4.5 5 630.00

Indoor Units Floor


€Cooling Heating

FLOOR UNIT WITH CASING FRONT SUCTION DC*

CL 23 430 MVD-22Z/DHN1-F4 2.2 2.4 655.00CL 23 431 MVD-28Z/DHN1-F4 2.8 3.2 685.00CL 23 432 MVD-36Z/DHN1-F4 3.6 4 750.00CL 23 433 MVD-45Z/DHN1-F4 4.5 5 810.00CL 23 434 MVD-56Z/DHN1-F4 5.6 6.3 840.00CL 23 435 MVD-71Z/DHN1-F4 7.1 8 855.00CL 23 436 MVD-80Z/DHN1-F4 8 9 875.00

FLOOR UNIT WITH CASING BUTTON SUCTION DC*

CL 23 440 MVD-22Z/DHN1-F5 2.2 2.4 665.00CL 23 441 MVD-28Z/DHN1-F5 2.8 3.2 670.00CL 23 442 MVD-36Z/DHN1-F5 3.6 4 735.00CL 23 443 MVD-45Z/DHN1-F5 4.5 5 755.00CL 23 444 MVD-56Z/DHN1-F5 5.6 6.3 810.00CL 23 445 MVD-71Z/DHN1-F5 7.1 8 820.00CL 23 446 MVD-80Z/DHN1-F5 8 9 875.00

FLOOR UNIT WITHOUT CASING DC*

CL 23 450 MVD-22Z/DHN1-F3B 2.2 2.4 555.00CL 23 451 MVD-28Z/DHN1-F3B 2.8 3.2 575.00CL 23 452 MVD-36Z/DHN1-F3B 3.6 4 650.00CL 23 453 MVD-45Z/DHN1-F3B 4.5 5 685.00CL 23 454 MVD-56Z/DHN1-F3B 5.6 6.3 730.00CL 23 455 MVD-71Z/DHN1-F3B 7.1 8 740.00CL 23 456 MVD-80Z/DHN1-F3B 8 9 795.00

*Check availability.

All indoor units are compatibles with Mini MVD V4+, Maxi MVD 2 pipes V5X and Maxi MVD 3 pipes VR4+ systems.Duct units 100% outdoor air, with console and floor with or without case, all are available upon request.

Wall DC

Wall D4+

Console DC

Floor unit with casing DC

Floor unit without casing DC



211

Control systemsCode Model €

WIRELESSCL 92 867 RM02A (Follow me + Auto Mode for 3-pipes system) 46.00CL 92 868 RM05 46.00

WIREDCL 92 905 KJR-12B (Follow me) 45.00CL 92 869 KJR-29B (Touch buttons + Follow me) 87.00CL 92 870 KJR-86C (Simplified) 70.00CL 92 946 KJR-120C/BW-E (Week programmer) 100.00CL 97 142 KJR-120B/BKP-E (Touch buttons + Auto Mode for 3-pipes system) 110.00

CENTRALIZEDCL 92 911 CCM03/E(M) (For 64 indoor uts. 2 pipes systems) 110.00CL 92 871 CCM30/BKE-B (For 64 indoor units 2 and 3 tubes system) 280.00CL 92 872 CCM15 (Weekly program via App and/or web for 64 indoor uts.) 900.00

INTEGRALSCL 92 875 IMM-ENET-MA(EN) (Software for 1024 indoor units) 2,839.00CL 92 876 IMM441V4PA58 (Hardware for 256 indoor uts.) 4,191.00CL 92 915 CCM08/E (Connect. to BMS/BACnet for 256 indoor uts.) 10,813.00CL 92 877 LonGW64/E (Connect. to LonWorks for 64 indoor uts.) 4,055.00CL 94 791 CCM18A/N (Connect. ModBus for 64 indoor units.) 3,174.00CL 94 792 MD-KNX-01(Connect. to KNX for 1 indoor ut.) 320.00

ACCESSORIESCL 92 879 KJR-150A/M-E (Group control for 16 indoor ut.) 104.00CL 92 880 KJR-32B (Alarm signal for 32 outdoor uts.) 88.00CL 92 917 NIM05 (Module for card holder control) 70.00CL 94 836 MD-NIM10 (connection module to wattmeter) 140.00CL 92 882 DTS634 / DTS636 (Digital wattmeter for outdoor ut.) 344.00CL 94 995 Installation box, surface for CL92871 16.00LC 23 013 AHUKZ-01B (9~20 kW) (Combinable control box UTA) 450.00LC 23 014 AHUKZ-02B (20.1~33 kW) (Combinable control box UTA) 600.00LC 23 015 AHUKZ-03B (40~56 kW) (Combinable control box UTA) 775.00

Cooling distributorsCode Model Description €

DISTRIB. INDOOR UT. (FOR V5X, VR4+ AND MINI V4+)TF 03 611 FQZHN-01D TO < 23 62.00TF 03 612 FQZHN-02D 23 ≤ TO < 46 68.00TF 03 613 FQZHN-03D 46 ≤ TO < 92 134.00TF 03 614 FQZHN-04D 92 ≤ TO < 135 201.00TF 03 615 FQZHN-05D 135 ≤ TO < 180 225.00TF 03 616 FQZHN-06D 180 ≤ TO 258.00

DISTRIBUTORS FOR VR4+ 3 PIPESTF 03 636 FQZHN-01SB TO < 16.6 70.00TF 03 637 FQZHN-02SB 16.6 ≤ TO < 33 75.00TF 03 638 FQZHN-03SB 33 ≤ TO < 66 80.00TF 03 639 FQZHN-04SB 66 ≤ TO < 92 130.00TF 03 640 FQZHN-05SB 92 ≤ TO 160.00

DISTR. BOX UT. INDOOR UNIT FOR VR4+ 3 PIPESCL 23 284 MVD-MS01/N1-C Distr. box 1 outlet (16kW total) 729.00CL 23 280 MVD-MS02/N1-C Distr. box 2 outlets (28kW total) 1,105.00CL 23 281 MVD-MS04/N1-C Distr. box 4 outlets (45kW total) 1,673.00CL 23 282 MVD-MS06/N1-C Distr. box 6 outlets (45kW total) 2,364.00CL 23 285 MVD-MS02E/N1-C Single box for 20-28kW duct 1,165.00CL 23 286 MVD-MS04E/N1-C Single box for 40-56kW duct 1,763.00

DISTR. BOX INDOOR UNIT FOR MINI V4+CL 23 283 FQT4-01 Distribution box 4 outlets 151.00

DISTRIBUTORS OUTDOOR UNITS V5X 2 PIPESTF 03 641 FQZHW-02N1D Connection 2 Outdoor units 72.00TF 03 642 FQZHW-03N1D Connection 3 Outdoor units 170.00TF 03 643 FQZHW-04N1D Connection 4 Outdoor units 200.00

DISTRIBUTORS OUTDOOR UNITS FOR VR4 + 3 PIPESTF 03 644 FQZHW-02SB Connection 2 Outdoor units 120.00TF 03 645 FQZHW-03SB Connection 3 Outdoor units 265.00TF 03 646 FQZHW-04SB Connection 4 Outdoor units 601.00

A = Total Capacity (kW) of indoor units connected from that distributor

RM02A

RM05

KJR-29B

AHUKZ

CCM30/BKE

KJR-12B

IMM-ENET-MA(EN)

FQZHN-D

MVD-MS06/N1-C

FQZHW-N1D



WATER FANCOILS

Code Item Cooling(W)

Heat.(W) €

WALL DC2 PIPES

CL 04 315CL 04 316CL 04 317CL 04 318

MUP-07-W7MUP-09-W7MUP-12-W7MUP-18-W7

2.370 2.860 3.270 4.450

4.910 5.520 6.690 9.200

386.00394.00429.00475.00

CASSETTE2 PIPES

CL 04 405CL 04 406CL 04 410CL 04 411

MUCSW-18-HGMUCSW-21-HGMUCSW-42-HGMUCSW-48-HG

5,100 6,10011,00013,500

5,300 6,30012,80014,700

697.00713.00876.00897.00

CASSETTE CD2 PIPES

CL 04 415CL 04 416CL 04 417CL 04 418CL 04 419

MUCS-14-W7MUCS-16-W7MUCS-20-W7MUCS-24-W7MUCS-36-W7

3,930 4,240 5,770 7,00010,640

5,340 5,770 7,850 9,52014,470

575.00595.00720.00795.00865.00

FLOOR - CEILING FANCOIL WITH CASING2 PIPES

CL 04 561CL 04 562CL 04 564CL 04 567CL 04 568

MUC-7-CE4MUC-11-CE4MUC-16-CE4MUC-32-CE4MUC-38-CE4

1,950 2,830 4,550 9,00010,800

3,200 4,300 7,50015,10017,800

363.00385.00479.00726.00766.00

FLOOR - CEILING FANCOIL WITH CASING2 PIPES

CL 04 590CL 04 591CL 04 592CL 04 593CL 04 594

MUC-07-W7/CE*MUC-11-W7/CEMUC-16-W7/CEMUC-19-W7/CEMUC-24-W7/CE

1,8703,2703,9705,6407,850

2,530 4,580 5,640 8,23011,690

385.00450.00490.00570.00710.00

FLOOR / CEILING WITHOUT CASING2 PIPES

CL 04 556CL 04 557CL 04 558CL 04 559

MUC-25-SE4MUC-32-SE4MUC-38-SE4MUC-44-SE4

7,200 9,00010,80012,600

12,80015,10017,80012,000

588.00625.00684.00718.00

FLOOR / CEILING WITHOUT CASING DC2 PIPES

CL 04 580CL 04 581CL 04 582CL 04 583CL 04 584

MUC-07-W7/SEMUC-11-W7/SEMUC-16-W7/SEMUC-19-W7/SEMUC-24-W7/SE*

1,8703,2703,9705,6407,850

2,530 4,580 5,640 8,23011,690

330.00350.00410.00430.00595.00


Floor-Ceiling with casing(feet not included)

Floor-Ceiling without casing

Cassette

Wall

Cassette DC

Floor-Ceiling with casing DC

Floor-Ceiling without casing DC



213

WATER FANCOILS

Code Item Cooling(W)

Heat.(W) €

DUCT FANCOIL STATIC HIGH PRESSURE2 PIPES

CL 04 571CL 04 572CL 04 573CL 04 574CL 04 575CL 04 576CL 04 577

MUC-12-HP4MUC-16-HP4MUC-25-HP4MUC-31-HP4MUC-43-HP4MUC-54-HP4MUC-68-HP4

3.700 4.900 7.500 9.30012.80015.90020.100

5.500 7.50011.30013.90019.10024.20030.700

381.00389.00643.00659.00802.00

1 039.001 248.00

ACCESORIESFOR FANCOILS

LC 04 530 2 legs set for MUC-SE4 39.00

LC 04 529 Multipurpose tray for MUC-SE4/CE4 48.00

CO 14 205CO 14 206

2 pipes thermostat TFDE2T (1)

4 pipes thermostat TFDE4T (1)

62.0071.00

LC 04 531LC 04 532

2 Pipes fan coil control kit (FCUKZ-03)4 Pipes fan coil control kit (FCUKZ-04)

240.00245.00

CO 05 501CO 05 502CO 05 503CO 05 504CO 05 505CO 05 506

Zone valve VFX 214 2-way 1/2" kvs 1.6Zone valve VFX 235 2-way 3/4" kvs 2.5Zone valve VFX 314 3-ways 1/2" kvs 1.6Zone valve VFX 335 3-ways 3/4" kvs 2.5Zone valve VFX 414 3-ways w/bypass 1/2" kvs 1.6Zone valve VFX 435 3-ways w/bypass 3/4" kvs 2.5

14.7016.1716.4318.5919.4321.00

CO 05 509 Heat accumulator SE1T230 for valves VFX 18.90

LC 04 526LC 04 527LC 04 528

Water heating battery (8.62KW) for MUC-32-SE4/CE4Water heating battery (10.5KW) for MUC-38-SE4/CE4Water heating battery (12.1KW) for MUC-44-SE4

162.00181.00195.00

LC 04 571LC 04 572LC 04 573LC 04 574LC 04 575LC 04 576LC 04 577

Water heating battery (3.3 kW) for MUC-12-HP4Water heating battery (5 kW) for MUC-16-HP4Water heating battery (6.6 kW) for MUC-25-HP4Water heating battery (8.3 kW) for MUC-31-HP4Water heating battery (11.6 kW) for MUC-43-HP4Water heating battery (14.9 kW) for MUC-54-HP4Water heating battery (19.8 kW) for MUC-68-HP4

230.00242.00248.00254.00281.00356.00368.00

*Check availability.(1)This thermostat can be installed on the wall or into the unit with casing


TFDE

2-ways

3-wayswith bypass

3-ways

SE1T230

Duct



WATER CHILLERS INVERTERMUENR-H6 Series

Code ModelPower (kW)

€Cooling Heat.

HEAT PUMP INVERTER

CL 25 620CL 25 621CL 25 622CL 25 623CL 25 626CL 25 627CL 25 628

MUENR-05-H6MUENR-07-H6MUENR-10-H6MUENR-12-H6MUENR-12-H6T (Three ph.)MUENR-14-H6T (Three. ph.)MUENR-16-H6T (Three. ph.)

57

1011.211.212.514.5

5.58

1112.312.313.816

2 525.002 740.004 125.004 200.004 220.004 630.004 700.00

MODULAR WATER CHILLERS MUEN-H6 Series

Code ModelPower (kW)

€Cooling Heat.

DIGITAL SCROLL HEAT PUMP (Three ph.)

CL 25 616CL 25 617

MUEN-30-H6TMUEN-65-H6T

3065

3269

7,450.0013,050.00

WATER CHILLERS ACCESSORIESCode Model €

CO 05 001CF 15 218

Flow switch SF-1KContactor CI-12 12A

53.0035.10

AC 32 260AC 32 009

Grundfos pumps for MUEN-30-H6T:Grundfos pumps CM10-2A (6 m³/h, 30 mca, 220/380V)Grundfos pumps CM10-5A (12 m³/h, 50 mca, 220/380V)

557.001,317.00

AC 32 008AC 32 010

Grundfos pumps for MUEN-65-H6T:Grundfos pumps CM15-2A (6 m³/h, 30 mca, 220/380V)Grundfos pumps CM15-3A (12 m³/h, 50 mca, 220/380V)

1,265.001,468.00

CC 09 199CC 09 200CC 09 201CC 09 202CC 09 203CC 09 204CC 09 205CC 09 206CC 09 207

Buffer tank chiller AR-A 30 LitersBuffer tank chiller AR-A 50 LitersBuffer tank chiller AR-A 100 LitersBuffer tank chiller AR-A 200 LitersBuffer tank chiller AR-A 300 LitersBuffer tank chiller AR-A 500 LitersBuffer tank chiller AR-A 750 LitersBuffer tank chiller AR-A 1000 LitersBuffer tank chiller AR-A 1500 Liters

228.00263.00426.00556.00669.00875.00

1,293.001,391.002,050.00

RECOMMENDED CAPACITIES TABLE

Code Model Capacity(kW)

Minimum Volume (I)Temp. at home Industrial process

CL 25 620 MUENR-05-H6 5 13 37CL 25 621 MUENR-07-H6 7 18.2 51.8CL 25 622 MUENR-10-H6 10 26 74

CL 25 623/626 MUENR-12-H6/H6T 12 31.2 88.8CL 25 627 MUENR-14-H6T 14 36.4 103.6CL 25 628 MUENR-16-H6T 15.5 40.3 114.7CL 25 616 MUEN-30-H6T 30 78 222CL 25 617 MUEN-65-H6T 65 169 481

Buffer tank capacity (L) = Minimum vol. (L) - Installation vol. (L)


CM15-2A

SF-1K

WITH

PUMP AND

EXPANSION

TANK

30÷1500 liters

SPLITS MOUNTING ACCESSORIES 215

DATA SHEETManuals, catalogues and data sheets: in our web

1x1 INVERTER WALL SPLITMUPR-H6 Series

EASILY DISMANTELED

Easy access to PCB, detachable fan, movable housing.Save 30 % of servicing time.

MORE ACCESSIBLE FILTERS

Without the need to open the panel, it avoids the dirt to fall down.Save 5% of cleaning time.

MORE SPACE FORINSTALLATION

New bracket, fastener feet, simpler electrical connection.Save 20% of installation time.

WIDE RANGE OF CONNECTIVITY

Possibility of connecting different control devices, among them also a Wifi module.Check your new Mundoclima air conditioner from anywhere you are.

Feeling functionThe wireless remote control incorporates a temperature sensor.

Automatic restartRecovery of the adjustments before the electrical cut.

Emergency operationPossibility of unit operation with the manual button in case of activation of some alarms.

Cold air protectionIn heating, the initial fan speed is adjusted in accordance with the coil temperature.

Turbo operationMaximum cooling/heating time reduction.

Low sound levelThanks to the Sleep Mode and its new design,the sound level diminishes up to a minimum of 20 dB(in the MUPR-09-H6 model).

Temperature compensationThe new remote control allows adjusting compensation temperature for the heating mode.

Different speeds of the external funAccurate adjustment of fan speed thanks to DC fan.

Without screws Not only the indoor unit but also the outdoor unit have less screws, so the disassembly is going to be easier.

Cooling under low temperaturesOperation in cooling up to -15 °C outdoor temp.

Standby Function (only 1W in standby)The outdoor unit is automatically disconnected fromthe supply when the unit is in standby, in that way the consumption in standby modus is only 1W.

Refrigerant leak detectionThe unit automatically detects the existence of possible leaks of refrigerant in the circuit.

Setpoint temperatures range adjustmentThe new remote control allows adjusting: Cooling minimum from 17 °C up to 24 °C; Maximum heating from 30 °C up to 25 °C.

Multi-speed indoor fan Up to 12 levels of fan speed automatically adjusted if the automatic ventilation is activated.

Feet in U formThanks to the new back feet in the outdoor unit installation is easier (in models MUPR-09/24-H6).

More silent outdoor unitDesign optimized of the air exit grill with decrease of the noise up to 3.3 dB (A) in comparison with previous models.

Wide working temperature rangeCooling operation until 50 °C and in heating up to -15 °C.

Savetimefor installation

SEERA++

168 mm



MODEL MUPR-09-H6 MUPR-12-H6 MUPR-18-H6 MUPR-24-H6Code CL20015 CL20016 CL20017 CL20018

Cooling

Nominal capacity (min. - max.) kW 2 63 (1.17~3.31) 3.51 (1.26~4.45) 5.27 (1.90~6.12) 7.03 (2.66~7.88)Nominal consumption (min. - max.) kW 0.82 (0.10~1.27) 1.15 (0.11~1.72) 1.63 (0.15~2.35) 2.30 (0.23~3.03)Pdesignc kW 2.6 3.5 5.3 7.0SEER W/W 6.8 6.7 6.8 6.4Energy labeling A++ A++ A++ A++

Heating

Nominal capacity (min. - max.) kW 2.93 (0.82~3.72) 3.81 (1.06~4.86) 5.56 (1.42~6.74) 7.62 (2.08~9.14)Nominal consumption (min. - max.) kW 0.81 (0.14~1.33) 1.05 (0.17~1.74) 1.50 (0.23~2.40) 2.30 (0.31~3.27)

Intermediateclimate zone

Pdesignh kW 2.4 2.6 4.4 5.6SCOP W/W 4.1 4.2 4.2 4.0Labeling A+ A+ A+ A+Tbiv °C -7 -7 -6 -7

Warm climate zone

Pdesignh kW 3.0 3.0 4.7 7.2SCOP W/W 5.1 5.2 5.4 5.2Energy labeling A+++ A+++ A+++ A+++Tbiv °C 2 2 5 4

Tol °C -15 -15 -15 -15Power supply V-Hz-Ph 230-50-1Ph 230-50-1Ph 230-50-1Ph 230-50-1PhMax. consumption kW 2.075 2.2 2.55 3.7Max. current A 9.5 10 11.5 17

Indoorunit

Air flow rate (High / Medium / Low) m³/h 472 / 360 / 254 562 / 497 / 224 870 / 730 / 500 1176 / 921 / 446Sound pressure (High / Medium / Low / Silence) dB(A) 40 / 35 / 28 / 20 41 / 40 / 33 / 22 45 / 43 / 34 / 24 47 / 45 / 35 / 28Sound power (High) dB(A) 53 52 58 60Dimensions (W x H x D) mm 717 x 302 x 193 805 x 302 x 193 964 x 325 x 222 1106 x 342 x 232Weight kg 7.0 7.7 10.1 13.2

Outdoorunit

Air flow rate (max.) m³/h 1900 2000 2100 2700Sound pressure (High) dB(A) 55 56 58 61Sound power (High) dB(A) 58 59 63 65Dimensions (W x H x D) mm 770 x 555 x 300 800 x 554 x 333 800 x 554 x 333 845 x 702 x 363Weight kg 26.6 29.1 37.8 48.4

Refrigerant

Type R410A R410A R410A R410ALoad kg 0.8 0.95 1.48 2Preloading until m 5 5 5 5Additional load (from 5 m) g/m 15 15 15 30

Connection pipes

Liquid mm (inches) Ø6.35 (1/4") Ø6.35 (1/4") Ø6.35 (1/4") Ø9.52 (3/8")Gas mm (inches) Ø9.52 (3/8") Ø9.52 (3/8") Ø12.7 (1/2") Ø15.9 (5/8")Max. Length m 25 25 30 50Max. Drop Height m 10 10 20 25

Electrical wiringSupply (outdoor unit) mm² 2 x 2.5 + T 2 x 2.5 + T 2 x 2.5 + T 2 x 4 + TInterconnection mm² 4 x 2.5 + T 4 x 2.5 + T 4 x 2.5 + T 4 x 4 + T

Remote control RG57 RG57 RG57 RG57

Operation temp.Indoor (Cooling / Heating) °C 17~32 / 0~30 17~32 / 0~30 17~32 / 0~30 17~32 / 0~30 Outdoor (Cooling / Heating) °C -15~50 / -15~30 -15~50 / -15~30 -15~50 / -15~30 -15~50 / -15~30

Warning: 1. Data and specifications are subject to changes without previous notice.2. The values of noise level match with values obtained in the anechoic chamber.

ELECTRICAL INSTALLATION

Model Electrical wiring (A)

Interconnection wiring (B)

MUPR-09-H6 2x2.5+T 4x2.5+TMUPR-12-H6 2x2.5+T 4x2.5+TMUPR-18-H6 2x2.5+T 4x2.5+TMUPR-24-H6 2x4+T 4x4+T

OPTIONALS

Description Code

WIFI MODULE CL94382

Wired wall control (KJR-12B) CL92905

Multi-function module adds: - Remote ON / OFF signal- Remote alarm signal- Wall control connection

with weekly program(KJR-120C)

- Centralized controller connection (CCM)

CL94383

Wired control week programmer (KJR-120C)* CL94384

Centralized controller*

CCM03/E(M) CL92911

CCM30/BKE-B CL92871

REFRIGERATING INSTALLATION

ModelPipe Max.

Length(B)

Max. slope(A)

Preloading until(m)

Additional charge (g/m)Liquid Gas

MUPR-09-H6 1/4" 3/8" 25 10 5 15MUPR-12-H6 1/4" 3/8" 25 10 5 15MUPR-18-H6 1/4" 1/2" 30 20 5 15MUPR-24-H6 3/8" 5/8" 50 25 5 30

* In case 2 (outdoor unit higher) for slopes higher than 5~7 m it is recommended to install an oil trap in the gas pipe every 5~7 m.

* For connection it is necessarythe Multi-function Module

1 2



1x1 INVERTER WALL SPLIT MUPR-H5A Series

SPECIFICATIONS

Model MUPR-09-H5A MUPR-12-H5A MUPR-18-H5A MUPR-24-H5A

Code CL20025 CL20026 CL20027 CL20028

Cooling

Rated capacity (min. ~ max.) kW 2.5 (1.0 - 2.8) 3.5 (1.1 - 3.7) 5.1 (1.3 - 5.4) 7.0 (2.0 - 7.6)

Rated consumption (min. - max.) kW 0.78 (0.085 - 1.0) 1.093 (0.086 - 1.6) 1.58 (0.2 - 2.0) 2.18 (0.3 - 2.9)

Pdesignc kW 2.5 3.5 5.1 7.0

SEER W/W 6.30 6.43 6.23 6.18

Energy labeling A++ A++ A++ A++

Heating

Rated capacity (min. ~ max.) kW 2.6 (0.69 - 2.9) 3.5 (1.1 - 3.8) 5.3 (1.4 - 6.1) 7.3 (2.5 - 8.0)

Rated consumption (min. - max.) kW 0.72 (0.11 - 1.4) 0.97 (0.188 - 1.6) 1.47 (0.35 - 2.2) 2.02 (0.35 - 3.0)

Intermediate climate zone

Pdesignh kW 2.4 3.5 4.7 5.8

SCOP W/W 4.10 4.07 4.06 4.05

Energy labeling A+ A+ A+ A+

Tbiv °C 2 2 2 2

Tol (Limited operating temperature) °C -10 -10 -10 -10

Power supply V-Hz-Ph 220-240V~ 50Hz, 1Ph

Max. consumption kW 1.5 1.9 2.8 3.2

Max. current A 8 9.5 11 16

Indoorunit

Air flow rate (Turbo / High / Medium / Low) m³/h 550 / 500 / 450 / 405 550 / 500 / 450 / 405 900 / 818 / 740 / 666 1250 / 1090 / 990 / 890

Sound pressure (Turbo / High / Medium / Low) dB(A) 42 / 37 / 33 / 27 42 / 37 / 33 / 27 48 / 43 / 38 / 32 50 / 45 / 40 / 34

Sound power (High) dB(A) 51 53 56 64

Dimensions (W x H x D) mm 750 x 285 x 200 750 x 285 x 200 900 x 311 x 225 1082 x 330 x 233

Weight kg 8 8.5 12 16

OutdoorUnit

Air flow rate (max.) m³/h 2000 2000 2150 2700

Sound pressure (High) dB(A) 52 52 54 55



Weight kg 27 27 35 50

Refrigerant

Type R410A R410A R410A R410A

Load kg 0.78 0.78 1.4 1.9

Preloading until m 5 5 5 5

Additional load (from 5 m) g/m 20 25 30 40

Connection pipes

Liquid mm (inches) Ø6.35 (1/4") Ø6.35 (1/4") Ø6.35 (1/4") Ø9.52 (3/8")

Gas mm (inches) Ø9.52 (3/8") Ø9.52 (3/8") Ø12.7 (1/2") Ø15.9 (5/8")

Max. Length m 20 20 25 25

Max. Drop Height m 10 10 15 15

Electrical wiringSupply (indoor unit) mm² 2 x 2.5 + T 2 x 2.5 + T 2 x 2.5 + T 2 x 4 + T

Interconnection mm² 3 x 2.5 + T 3 x 2.5 + T 3 x 2.5 + T 3 x 4 + T

Wireless remote control H Series H Series H Series H Series

Operationtemperature

Indoor (Cooling / Heating) °C 18 ~ 32 / 0 ~ 30 18 ~ 32 / 0 ~ 30 18 ~ 32 / 0 ~ 30 18 ~ 32 / 0 ~ 30

Outdoor (Cooling / Heating) °C -10 ~ 47 / -10 ~ 30 -10 ~ 47 / -10 ~ 30 -10 ~ 47 / -10 ~ 30 -10 ~ 47 / -10 ~ 30


SCOPA+

SEERA++






Low voltage startThe equipment can start and run normally up to a supply voltage of 165 V.

Follow Me Function (iFeel)The wireless remote control incorporates a temperature sensor. The unit automatically selects the operating mode in order to achieve greater control and comfort in temperature.

Cooling in low temperaturesOperation in cooling up to -10 °C outdoor temp.


Wide working temperature rangeCooling operation until 47 °C and in heating until -10 °C.

Different speeds of the external fanAccurate adjustment of fan speed thanks to fan DC.



ModelWiring

Power supply (A)

WiringInterconnection

(B)

MUPR-09-H5A 2 x 2.5 + T 3 x 2.5 + T

MUPR-12-H5A 2 x 2.5 + T 3 x 2.5 + T

MUPR-18-H5A 2 x 2.5 + T 3 x 2.5 + T

MUPR-24-H5A 2 x 4 + T 3 x 4 + T


ModelPipe Length

Maximal(B)

SlopeMaximum

(A)

Preload until(m)


MUPR-09-H5A 1/4" 3/8" 20 10 5 20

MUPR-12-H5A 1/4" 3/8" 20 10 5 25

MUPR-18-H5A 1/4" 1/2" 25 15 5 30

MUPR-24-H5A 3/8" 5/8" 25 15 5 40

* In case 2 (outdoor unit higher) for slopes higher than 5~7 m it is recommended to install an oil trap in the gas pipe every 5~7m.

1 2

1x1 WALL SPLIT INVERTER H5A



1x1 INVERTER WALL SPLITMUPR-H7 Series

EASILY DISMANTELED








Feeling functionThe wireless remote control incorporatesa temperature sensor.





Low sound levelThanks to the Sleep Mode and its new design,the sound level diminishes up to a minimum of 20 dB(in the MUPR-09-H7 model).


Different speeds of the external funAccurate adjustment of fan speed thanks to DC fan.


Cooling under low temperaturesOperation in cooling up to -15 °C outdoor temp.


Refrigerant leak detectionThe unit automatically detects the existence of possible leaks of refrigerant in the circuit.

Setpoint temperatures range adjustmentThe new remote control allows adjusting: Cooling minimum from 17 °C up to 24 °C; Maximum heating from 30 °C up to 25 °C.

Multi-speed indoor fan Up to 12 levels of fan speed automatically adjusted if the automatic ventilation is activated.

Feet in U formThanks to the new back feet in the outdoor unit installation is easier (except in MUPR-18-H7).

More silent outdoor unitDesign optimized of the air exit grill with decrease ofthe noise up to 3.3 dB (A) in comparison with previous models.



SEERA++

168 mm

Gas

R32More

Ecological



MODEL MUPR-09-H7 MUPR-12-H7 MUPR-18-H7 MUPR-24-H7Code CL20035 CL20036 CL20037 CL20038

Cooling

Rated capacity (min. ~ max.) kW 2.63 (1.20 - 3.42) 3.51 (1.40 - 4.57) 5.27 (1.96 - 6.21) 7.32 (3.04 - 8.44)Rated consumption (min. - max.) kW 0.77 (0.10 - 1.32) 1.25 (0.11 - 1.74) 1.50 (0.15 - 2.22) 2.26 (0.23 - 3.01)Pdesignc kW 2.6 3.5 5.3 7.3SEER W/W 6.8 6.5 7.1 6.9Energy labeling A++ A++ A++ A++

Heating

Rated capacity (min. ~ max.) kW 2.93 (0.82 - 3.86) 4.10 (0.87 - 5.12) 5.56 (1.28 - 6.97) 7.61 (2.08 - 9.43)Rated consumption (min. - max.) kW 0.78 (0.14 - 1.38) 1.17 (0.15 - 1.83) 1.39 (0.22 - 2.33) 2.11 (0.33 - 3.15)


Pdesignh kW 2.4 2.5 4.2 5.6SCOP W/W 4.0 4.0 4.0 4.0Energy labeling A+ A+ A+ A+Tbiv °C -7 -7 -6 -7

Warm climate zone

Pdesignh kW 3.0 3.2 4.5 7.0SCOP W/W 5.1 5.2 5.1 5.1Energy labeling A+++ A+++ A+++ A+++Tbiv °C 2 2 2 2

Tol (Limited operating temperature) °C -15 -15 -15 -15Power supply V-Hz-Ph 220-240V~ 50Hz, 1PhMax. consumption kW 2,075 2.2 2.55 3.6Max. current A 9.5 10 11.5 16

Indoor unit

Air flow rate (High /Medium /Low) m³/h 486 / 433 / 329 550 / 490 / 360 810 / 720 / 550 1050 / 970 / 650Sound pressure (High / Medium / Low / Silence) dB(A) 41 / 34 / 29 / 22 41 / 37 / 30 / 23 45 / 41 / 33 / 24 46 / 44 / 35 / 27Sound power (High) dB(A) 53 54 57 59Dimensions (W x H x D) mm 717 x 302 x 193 805 x 302 x 193 964 x 325 x 222 1106 x 342 x 232Weight kg 7.5 8.2 10.8 14.3

Outdoor unit

Air flow rate (max.) m³/h 2000 2000 2100 2700Sound pressure (High) dB(A) 55 55 57 59Sound power (High) dB(A) 58 60 60 65Dimensions (W x H x D) mm 770 x 555 x 300 770 x 555 x 300 800 x 554 x 333 845 x 702 x 363Weight kg 26.4 26.5 37 48

Refrigerant

Type R32 R32 R32 R32Load kg 0.7 0.8 1.25 1.6Preload until m 5 5 5 5Additional load (from 5 m) g/m 12 12 12 24

Connection pipes

Liquid mm (inches) Ø6.35 (1/4") Ø6.35 (1/4") Ø6.35 (1/4") Ø9.52 (3/8")Gas mm (inches) Ø9.52 (3/8") Ø9.52 (3/8") Ø12.7 (1/2") Ø15.9 (5/8")Max. Length m 25 25 30 50Max. Drop Height m 10 10 20 25

Electrical power wiring

Supply (outdoor unit) mm² 2 x 2.5 + T 2 x 2.5 + T 2 x 2.5 + T 2 x 4 + TInterconnection mm² 4 x 2.5 + T 4 x 2.5 + T 4 x 2.5 + T 4 x 4 + T

Wireless remote control RG57 RG57 RG57 RG57Operation temperature

Indoor (Cooling / Heating) °C 17 ~ 32 / 0 ~ 30 17 ~ 32 / 0 ~ 30 17 ~ 32 / 0 ~ 30 17 ~ 32 / 0 ~ 30 Outdoor (Cooling / Heating) °C -15 ~ 50 / -15 ~ 30 -15 ~ 50 / -15 ~ 30 -15 ~ 50 / -15 ~ 30 -15 ~ 50 / -15 ~ 30





MUPR-09-H7 2x2.5+T 4x2.5+TMUPR-12-H7 2x2.5+T 4x2.5+TMUPR-18-H7 2x2.5+T 4x2.5+TMUPR-24-H7 2x4+T 4x4+T

OPTIONALS

Description Code

WIFI MODULE CL94382


Multi-function module adds: - Remote ON / OFF signal- Remote alarm signal- Wall control connection

with weekly program(KJR-120C)

- Centralized controller connection (CCM)

CL94383

Wired control week programmer (KJR-120C)* CL94384


CCM03/E(M) CL92911

CCM30/BKE-B CL92871


ModelPipe Max.

Length(B)

Max. slope(A)

Preload until(m)


MUPR-09-H7 1/4" 3/8" 25 10 5 12MUPR-12-H7 1/4" 3/8" 25 10 5 12MUPR-18-H7 1/4" 1/2" 30 20 5 12MUPR-24-H7 3/8" 5/8" 50 25 5 24

* In case 2 (outdoor unit higher) for slopes higher than 5~7 m it is recommended to install an oil trap in the gas pipe every 5~7 m.

* For connection it is necessary the Multi-function Module

1 2



MULTISPLIT INVERTER H6Indoor Unit MUEX-H6 Series2x1, 3x1, 4x1 and 5x1

Different speeds of the external fanAccurate adjustment of fan speed thanksto DC fan.



More silent outdoor unitDesign optimized of the air exit grill with decrease of the noise up to 3.3 dB (A) in comparison with previous models.

Wide working temperature rangeCooling operation until 50 °C and in heating upto -15 °C.

126 Possible combinationsChoose the indoor unit that best suits your needs.




OUTDOOR UNIT SPECIFICATIONS

Model MUEX-14-H6.2 MUEX-18-H6.2 MUEX-21-H6.3 MUEX-27-H6.3

Code CL 20 440 CL 20 441 CL 20 442 CL 20 443

Cooling

Nominal capacity (min. - max.) kW 4.10 (1.76 - 4.54) 5.20 (2.08 - 6.29) 6.30 (2.44-7.32) 7.90 (2.77 - 8.69)

Nominal consumption (min. - max.) kW 1.24 (0.42 - 1.43) 1.75 (0.59 - 2.16) 1.94 (0.68 - 2.38) 2.46 (0.76 - 2.93)

Pdesignc kW 4.10 5.20 6.10 7.90

SEER W/W 6.80 6.30 6.40 6.60

Energy labeling A++ A++ A++ A++

Heating

Nominal capacity (min. - max.) kW 4.40 (1.89 - 4.87) 5.50 (2.2 - 6.66) 6.70 (2.64 - 7.92) 8.20 (2.87 - 9.02)

Nominal consumption (min. - max.) kW 1.16 (0.39 - 1.33) 1.50 (0.5 - 1.85) 1.81 (0.64 - 2.22) 2.27 (0.70 - 2.70)

Pdesignh kW 3.40 4.70 5.70 5.90

SCOP W/W 4.00 4.00 4.00 4.00

Energy labeling A+ A+ A+ A+

Tbiv °C -7 -7 -7 -7

Tol °C -15 -15 -15 -15

Power supply V-Hz-Ph 230 / 50 / 1Ph 230 / 50 / 1Ph 230 / 50 / 1Ph 230 / 50 / 1Ph

Max. consumption kW 2.0 2.3 2.8 3.3

Max. current A 11 12 15 16

OutdoorUnit

Air flow rate (max.) m³/h 2,100 2,100 2,800 3,300

Sound pressure (High) dB(A) 54 56.5 57.5 59.5



Weight kg 30.5 36 47 52.7

Refrigerant

Type R410A R410A R410A R410A

Load kg 1.25 1.7 2.1 2.1

Preload until (total pipes 1/4") m 15 15 22.5 22.5

Additional load (pipes 1/4") g/m 15 15 15 15

Connection pipes

Liquid inch. (1/4") x 2" (1/4") x 2 (1/4") x 3 (1/4") x 3

Gas inch. (3/8") x 2" (3/8") x 2 (3/8") x 3 (3/8") x 3

Max. Length m 30 30 45 45

Length for indoor unit m 25 25 30 30

Max. Drop Height

Outdoor ut. up m 15 15 15 15

Outdoor ut. down m 15 15 15 15

Height difference between indoor units m 10 10 10 10

Electrical wiringSupply (outdoor unit only) mm² 2 x 2.5 + T 2 x 2.5 + T 2 x 4 + T 2 x 4 + T

Interconnection per unit Interior mm² 3 x 1.5 + T 3 x 1.5 + T 3 x 1.5 + T 3 x 1.5 + T

Operation temp.Indoor (Cool. / Heat.) °C 17~32 / 0~30 17~32 / 0~30 17~32 / 0~30 17~32 / 0~30

Outdoor (Cool. / Heat.) °C -15~50 / -15~24 -15~50 / -15~24 -15~50 / -15~24 -15~50 / -15~24

Warning: 1. Data and specifications are subject to changes without previous notice. 2. The values of noise level match with values obtained in the semi-anechoic chamber. 3. The capacity, consumption and SEER / SCOP values indicated are for MUPR-09-H6M indoor units (just as much

outputs has the outdoor unit), for other combinations see the combinations table (www.mundoclima.com).




OUTDOOR UNIT SPECIFICATIONS

Model MUEX-28-H6.4 MUEX-36-H6.4 MUEX-42-H6.5

Code CL 20 444 CL 20 445 CL 20 446

Cooling

Nominal capacity (min. - max.) kW 8.21 (3.04 - 9.93) 10.60 (3.71-13.78) 12.30 (4.18-14.00)

Nominal consumption (min. - max.) kW 2.31 (0.77 - 3.13) 3.89 (1.06 - 4.32) 3.82 (1.03 - 4.66)

Pdesignc kW 8.20 10.60 12.30

SEER W/W 6.80 7.60 7.70

Energy labeling A++ A++ A++

Heating

Nominal capacity (min. - max.) kW 8.90 (3.26-10.65) 11,10(3,89-13,32) 12,30(4,18-14,94)

Nominal consumption (min. - max.) kW 3.47 (0.83 - 3.05) 3.00 (0.81 - 3.89) 3.37 (0.91 - 4.21)

Pdesignh kW 7.00 9.30 9.60

SCOP W/W 4.00 3.80 3.80

Energy labeling A+ A A

Tbiv °C -7 -7 -7

Tol °C -15 -15 -15

Power supply V-Hz-Ph 230 / 50 / 1Ph 230 / 50 / 1Ph 230 / 50 / 1Ph

Max. consumption kW 3.5 4.6 4.7

Max. current A 17 21.5 22

OutdoorUnit

Air flow rate (max.) m³/h 3,500 5,500 5,500

Sound pressure (High) dB(A) 60 63.5 62

Sound power (High) dB(A) 66 68 68

Dimensions (W x H x D) mm 946 x 810 x 410 946 x 810 x 410 946 x 810 x 410

Weight kg 67.6 70 76

Refrigerant

Type R410A R410A R410A

Load kg 2.4 3.0 3.6

Preload until (total pipes 1/4") m 30 30 37.5

Additional load (pipes 1/4") g/m 15 15 15

Connection pipes

Liquid inch. (1/4")x3+(1/4")x1 (1/4")x3+(1/4")x1 (1/4")x4+(1/4")x1

Gas inch. (3/8")x3+(1/2")x1 (3/8")x3+(1/2")x1 (3/8")x4+(1/2")x1

Max. Length m 60 60 75

Length for indoor unit m 35 35 35

Max. Drop Height

Outdoor ut. up m 15 15 15

Outdoor ut. down m 15 15 15

Height difference between indoor units m 10 10 10

Electrical wiringSupply (outdoor unit only) mm² 2 x 4 + T 2 x 4 + T 2 x 4 + T

Interconnection per unit Interior mm² 3 x 1.5 + T 3 x 1.5 + T 3 x 1.5 + T

Operation temp.Indoor (Cool. / Heat.) °C 17~32 / 0~30 17~32 / 0~30 17~32 / 0~30

Outdoor (Cool. / Heat.) °C -15~50 / -15~24 -15~50 / -15~24 -15~50 / -15~24

Warning: 1. Data and specifications are subject to changes without previous notice. 2. The values of noise level match with values obtained in the semi-anechoic chamber. 3. The capacity, consumption and SEER / SCOP values indicated are for MUPR-09-H6M indoor units (just as much

outputs has the outdoor unit), for other combinations see the combinations table (www.mundoclima.com).



MULTISPLIT INVERTER H6Wall Type MUPR-H6M Series

EASILY DISMANTELED








Model MUPR-09-H6M MUPR-12-H6M MUPR-18-H6M MUPR-24-H6M

Code CL 20 450 CL 20 451 CL 20 452 CL 20 453

CoolingNominal capacity (min. ~ max.) kW 2.63 (1.17 ~ 3.31) 3.51 (1.26 ~ 4.45) 5.27 (1.90 ~ 6.12) 7.03 (2.66 ~ 7.88)

Nominal rating W 24 24 34 62

HeatingNominal capacity (min. ~ max.) kW 2.93 (0.82 ~ 3.72) 3.81 (1.06 ~ 4.86) 5.56 (1.42 ~ 6.74) 7.62 (2.08 ~ 9.14)

Nominal rating W 24 24 34 62

Air flow rate (High / Medium / Low) m³/h 472 / 360 / 254 562 / 497 / 224 870 / 730 / 500 1176 / 921 / 446

Sound pressure (High / Medium / Low) dB(A) 40 / 35 / 28 41 / 40 / 33 45 / 43 / 34 47 / 45 / 35


Remote control RG57 RG57 RG57 RG57

Connection pipes

Liquid mm (inches) Ø6.35 (1/4") Ø6.35 (1/4") Ø6.35 (1/4") Ø9.52 (3/8")

Gas mm (inches) Ø9.52 (3/8") Ø9.52 (3/8") Ø12.7 (1/2") Ø15.9 (5/8")


Weight kg 7.0 7.7 10.1 13.2

Warning: 1. Data and specifications are subject to changes without previous notice. 2. The values of noise level match with values obtained in the semi-anechoic chamber. 3. The capacity values will vary depending on the selected outdoor unit.


168 mm

Feeling functionThe wireless remote control incorporates a temperature sensor.



Cold air protectionIn heating, the initial fan speedis adjusted in accordance withthe coil temperature.

Turbo operationMaximum cooling/heatingtime reduction.


OPTIONALS

Description Code

WIFI MODULE CL94382


Multi-function module adds: - ON / OFF remote signal - Alarm remote signal - Connection of wired control with week

programmer (KJR-120C) - Connection of centralized controller (CCM)

CL94383

Wired control week programmer(KJR-120C)* CL94384


CCM03/E(M) CL92911

CCM30/BKE-B CL92871

* For connection it is necessary the Multi-function Module (CL 94 383).



MULTISPLIT INVERTER H6Cassette Type MUCSR-H6M Series- Design 360°- Compact size (60x60).- Condensate removal pump.- Fresh air intake function.- Ducted outlet for exhaust air in adjacent

room.- Low noise and low-energy consumption

DC fan motor.- Remote ON/OFF signal and alarm.- Parameters setting using remote control RG57.- Wireless remote control RG57 included.- Wall-mounted remote control with week

schedule and “Follow me” function that monitors until 16 units at the same timeKJR-120G (2 wires cable) (optional)

- Centralized controller CCM (optional).



Night modeThis function automatically increases or drops indoor temperature by 1 °C per hour during the first 2 h,and then keeps constant temp. for the next 5 h before turning off. This function is energy-saving and provides night comfort.

Timer functionThe timer can be set to start and stop at any point ina 24-hour period.

Problem solvingError codes are showed in the indoor panel, wall control and outdoor PCB.

Design 360°Thanks to the 360° panel design, the air is moreevenly distributed.

Remote signs (CP)The indoor unit has an ON/OFF input and an alarm output.

Cold air protection In heating, the initial fan speed is adjusted in accordance with the coil temperature.


Centralized controller CCMPossibility to control several units from only one control.It can directly control up to 64 units of different systems (Air conditioners Inverter H6, H7, MVD and Fan coil units W7 series) (optional).

RG57KJR-120G (Optional)(code CL 94 907)

Model MUCSR-12-H6M MUCSR-18-H6MCode CL20454 CL20455

Cooling Rated capacity (min. ~ max.) kW 3.52 (0.62 ~ 4.40) 4.92 (0.79 ~ 6.15)Nominal rating W 40 102

Heating Rated capacity (min. ~ max.) kW 4.10 (0.62 ~ 5.13) 5.57 (0.88 ~ 7.03)Nominal rating W 40 102

Air flow rate (High /Medium /Low) m³/h 650 / 530 / 450 800 / 650 / 500Sound pressure (High / Medium / Low) dB(A) 42 / 38 / 34 48 / 42 / 36Sound power (High) dB(A) 58 59Drain connection mm ø 25 ø 25Drain pump height mm 750 750Fresh air intake mm ø 65 ø 65Power supply V-Hz-Ph 220-240V~ 50Hz, 1Ph 220-240V~ 50Hz, 1PhRemote control RG57 RG57

Connection pipes Liquid mm (inch) ø 6.35 (1/4") ø 6.35 (1/4")Gas mm (inch) ø 9.52 (3/8") ø 12.7 (1/2")

Dimensions Unit body (Width x Height x Depth) mm 570 x 260 x 570 570 x 260 x 570Panel (Width x Height x Depth) mm 647 x 50 x 647 647 x 50 x 647

Weight Unit kg 16 18Panel kg 2.5 2.5

Warning: 1. Data and specifications are subject to changes without previous notice.2. The values of noise level match with values obtained in the semi-anechoic chamber.



MULTISPLIT INVERTER H6Duct Type MUCR-H6M Series- Low silhouette duct- Configurable rear (by default) or bottom

air intake- Drain pump with easy access.- Fresh air intake function.- Low noise and low-energy consumption DC

fan motor.- Remote ON/OFF signal and alarm.- Adjustment of static pressure and other

parameters using the PCB or the wireless remote control RG57 (optional)

- Wall-mounted wired controller with weekly schedule and “Follow me” function that can control up to 16 units together KJR-120G(2 wires) (optional).

- Wireless remote control RG57 (optional).- Centralized controller CCM (optional). KJR-120G RG57 (Optional)

(code: CL 94 774)



Night modeThis function automatically increases or drops indoor temperature by 1 °C per hour during the first 2 h, and then keeps constant temp. for the next 5 h before turning off. This function is energy-saving and provides night comfort.

Configurable static pressureThe static pressure of the fan can be adjusted using the PCB or the wireless control RG57. In this way, the machine can be adapted to each installation.

Timer functionThe timer can be set to start and stop at any point in a 24-hour period.


Configurable returnThe air intake can be set up either at the rear or at the bottom of the unit. By default, it is set up at the rear.




Follow Me FunctionThe wall-mounted wire control adds a temperature sensor.


Model MUCR-12-H6M MUCR-18-H6MCode CL20456 CL20457

Cooling Rated capacity (min. ~ max.) kW 3.52 (0.62 ~ 4.40) 5.27 (1.90 ~ 6.12)Nominal rating W 40 107

Heating Rated capacity (min. ~ max.) kW 3.81 (0.62 ~ 4.98) 5.86 (1.42 ~ 6.74)Nominal rating W 40 107

Static pressure Rated Pa 25 25Configurable (1*) Pa 0 ~ 45 0 ~ 60

Air flow rate (High / Medium / Low) m³/h 680 / 580 / 450 816 / 546 / 424Sound pressure (High / Medium / Low) dB(A) 42 / 38 / 35 46 / 42 / 40Sound power (High) dB(A) 59 59Drain connection mm ø 25 ø 25Drain pump height mm 750 750Fresh air intake mm ø 90 ø 90Power supply V-Hz-Ph 220-240V~ 50Hz, 1Ph 220-240V~ 50Hz, 1PhWired remote control KJR-120G KJR-120G

Connection pipes Liquid mm (inch) ø 6.35 (1/4") ø 6.35 (1/4")Gas mm (inch) ø 9.52 (3/8") ø 12.7 (1/2")

Dimensions (W x H x D) mm 700 x 210 x 635 920 x 210 x 635Weight kg 18.4 23

Warning: 1. Data and specifications are subject to changes without previous notice.2. The values of noise level match with values obtained in the semi-anechoic chamber.




Selection Multisplit Inverter H6

STEP 1Select the power that best suited to each of the rooms to be air-conditioned. The following table shows the different powers so you can select the most suitable model for your needs.

Model 9 12 18 24

Capacity 2.6 kW 3.5 kW 5.2 kW 7.0 kW

MUPR-09-H6MCL 20 450




— MUCSR-12-H6MCL 20 454

MUCSR-18-H6MCL 20 455 —

— MUCR-12-H6MCL 20 456

MUCR-18-H6MCL 20 457 —

STEP 2Select the outdoor unit that best suits to the chosen combination of indoor units.

2x1 3x1 4x1 5x1

MUEX-14-H6.2 MUEX-18-H6.2 MUEX-21-H6.3 MUEX-27-H6.3 MUEX-28-H6.4 MUEX-36-H6.4 MUEX-42-H6.5

CL 20 440 CL 20 441 CL 20 442 CL 20 443 CL 20 444 CL 20 445 CL 20 446

1ROOM

91218

91218

91218

91218

9121824

9121824

9121824

2ROOMS

9+99+12

9+99+129+18

12+12

9+99+129+18

12+12

9+99+129+18

12+1212+18

9+99+129+189+24

12+1212+1812+2418+18

9+99+129+189+24

12+1212+1812+2418+18

9+99+129+189+24

12+1212+1812+2418+1818+24

3ROOMS — — 9+9+9

9+9+12

9+9+99+9+129+9+18

9+12+129+12+18

12+12+12

9+9+99+9+129+9+18

9+12+129+12+18

12+12+12

9+9+99+9+129+9+189+9+24

9+12+129+12+189+12+249+18+18

12+12+1212+12+1812+12+2412+18+18

9+9+99+9+129+9+189+9+24

9+12+129+12+189+12+249+18+18

12+12+1212+12+1812+12+2412+18+1812+18+2418+18+18

4ROOMS — — — — 9+9+9+9

9+9+9+12

9+9+9+99+9+9+129+9+9+18

9+9+12+129+9+12+18

9+12+12+129+12+12+189+12+12+18

12+12+12+12

9+9+9+99+9+9+129+9+9+189+9+9+24

9+9+12+129+9+12+189+9+12+249+9+18+18

9+12+12+129+12+12+189+12+12+249+12+18+18

12+12+12+1212+12+12+18

5ROOMS — — — — — —

9+9+9+9+99+9+9+9+129+9+9+9+18

9+9+9+12+129+9+9+12+18

9+9+12+12+129+12+12+12+129+12+12+12+18

12+12+12+12+12

WALLSPLIT

CASSETTE

DUCT



MULTISPLIT INVERTER H32x1, 3x1, 4x1 and 5x1- Multiple combinations.- Operation under low temperature (-15 °C).

TECHNICAL SPECIFICATIONS OUTDOOR UNIT

MODEL2x1 3x1 4x1 5x1

MUEX-18 H3.2 MUEX-24 H3.3 MUEX-28 H3.4 MUEX-42 H3.5

Code CL 20 810 CL 20 811 CL 20 812 CL 20 813Function Cooling Heating Cooling Heating Cooling Heating Cooling Heating

Capacity

W 5,000 5,600 7,000 8,500 8,000 9,400 12,100 13,000

Btu/h 17,100 21,154 23,900 29,000 27,300 32,100 41,385 44,450

Kcal/h 4,300 4,850 6,050 7,310 6,900 8,080 10,400 11,180

Elect. consumption W 1,500 1,450 2,400 2,350 2,200 2,350 3,420 3,400

SEER/SCOP 5.6/3.8 5.1/3.8 5.1/3.8 5.1/3.8

Nominal intensity A 6.65 6.45 9.75 10.45 11 11.35 16 16.2

Max. current A 10.5 16.0 21.0 23.0

Air flow rate m³/h 3,200 3,200 4,000 5,500

Sound pressure dBA 56 58 59 59

Dimensions (WxDxH) mm 963x396x700 1.001x427x790 1.001x427x790 1.015x440x1.103

Weight kg 43 59 59 96

Refrigerant gas load gr 1,800 2,200 2,200 4,800

Connection pipeLiquid 1/4" x 2 1/4" x 3 1/4" x 4 1/4"x2 1/4"x2 3/8"x1

Gas 3/8" x 2 3/8" x 3 3/8" x 4 3/8"x2 1/2"x2 5/8"x1

Height difference m 5 10 10 15

Max. total distance m 20 60 70 80

Max. indoor unit distance m 10 20 20 25

Preloaded distance m 20 30 40 50

Additional charge g/m 22 22 22 22

No. interconnection cables 4 x 1,5 for indoor unit

Power supply Outdoor unit 3x2.5

Notes: 1. Data and specifications are subject to changes without previous notice. 2. The values of noise level match with values obtained in the anechoic chamber.

Ceiling-Floor

Console

Duct

Outdoor unit



MULTISPLIT INVERTER H32x1, 3x1, 4x1 and 5x1

Ceiling-floor split type

MODEL MUSTR-18-H3M MUSTR-24-H3M

Code CL 20 832 CL 20 833

Function Cooling Heating Cooling Heating

Capacity

W 5,000 5,500 7,100 8,000

Btu/h 18,000 19,300 24,225 27,296

Kcal/h 4,300 4,730 6,106 6,880

Air flow rate m³/h 950 1,250

Sound pressure (L/H) dBA 40/45 44/48

Sound power (L/H) dBA 50/55 50/58

Dimensions (WxDxH) mm 1.220x700x225 1.220x700x225

Weight kg 40 45

Connection pipeLiquid 1/4" 3/8"

Gas 1/2" 5/8"

Warning: 1. Data and specifications are subject to changes without previous notice. 2. The values of noise level match with values obtained in the anechoic chamber.

Duct type split

MODEL MUCR-21-H3M MUCR-24-H3M

Code CL 20 837 CL 20 838


Capacity

W 6,000 6,600 7,100 8,000

Btu/h 20,470 22,520 24,230 27,300

Kcal/h 5,160 5,676 6,106 6,880

Air flow rate m³/h 1,000 1,200

Sound pressure (L/H) dBA 34/42 34/42

Sound power (L/H) dBA 44/52 44/52

Dehumidification l/h 2 2.5

Dimensions (WxDxH) mm 1100x615x200 1100x615x200

Weight kg 31 31


Gas 5/8" 5/8"




MULTISPLIT INVERTER H32x1, 3x1, 4x1 and 5x1

Console split type

MODEL MUCNR-09-H3M MUCNR-12-H3M

Code CL 20 827 CL 20 828


Capacity

W 2,600 2,800 3,500 3,850

Btu/h 8,944 9,632 12,000 13,136

Kcal/h 2,236 2,408 3,010 3,311

Air flow (L/M/H/SH) m³/h 480/530/560/650 550/600/650/750

Sound pressure (L/M/H/SH) dBA 26/33/38/40 32/37/40/42

Sound power (L/M/H/SH) dBA 36/43/48/50 42/47/50/52

Dehumidification l/h 0.8 1.40

Dimensions (WxDxH) mm 700x215x600 700x215x600

Weight kg 13 15


Gas 3/8" 3/8"


MULTISPLIT INVERTER H3 RANGE FEATURES

Automatic mode In this mode the machine automatically selects between heating or cooling dependingon the demanded temperature.

Turbo modeThe desired temperatureis achieved in a short periodof time.

Fan SpeedPossibility to regulate the indoor unit fan speed.

Auto-cleaningIt incorporates a process of cleaning the indoor unit battery to prevent odors.

Anti-cold air controlin winter seasonTemperature control inside the indoor unit battery to prevent air supply below the desired temperature desired during the winter season. This cold whether may generate due to defrost process or unit restarts.

Auto-restart functionIn case of failure by tension, the unit restores the operating conditions automatically when power is restored.

Programmable operationFrom the remote control ON/OFF functions of the equipment can be programmed.

Cooling withextreme temperaturesThe air conditioning unit can be used in temperatures up to -15 °C for cooling and heating.

Swing functionAutomatically mode, the air flow varies vertically its deflection.

Position memoryThe main position of the blade deflection is recorded, so that its position is recovered the next time the unit is on.

Deflection adjustmentAdjustment from the remote control from the position of the main deflection blade.

Double deflectionPossibility to regulate vertical and horizontally the air flow delivered by the indoor unit.

Washable filterRemovable filters made of resistant material to be cleaned periodically.

Anti-particle filterRemoves formaldehyde and other organic compounds (VOCs) and odors and harmful gases.

Economic / Sleep ModeIt allows working at low powerin a more quiet and economical mode.

Outdoor air intakeThe indoor unit is ready to receive air from outside.




Multisplit selection

STEP 1Select the type of split and power and type of unit that best suited to each of the rooms to be air conditioned. The following table shows the different types of splits and their power, so you can select the most suitable model.

9 12 18 21 24

2.6 kW 3.5 kW 5.2 kW 6.3 kW 7.5 kW

SPLITDUCT — — — MUCR-21-H3M

CL 20 837MUCR-24-H3M

CL 20 838

SPLIT FLOOR/CEILING — — MUSTR-18-H3M

CL 20 832 — MUSTR-24-H3MCL 20 833

DOUBLE FLOW CONSOLE SPLIT

MUCNR-09-H3MCL 20 827

MUCNR-12-H3MCL 20 828 — — —


2x1 3x1 4x1 5x1

MUEX-18 H3.2CL 20 810

MUEX-24 H3.3CL 20 811

MUEX-28 H3.4CL 20 812

MUEX-42 H3.5CL 20 813

1ROOM

79

12

2ROOMS

7+77+129+12

7+99+9

12+12

7+77+129+9

9+1812+18

7+97+189+12

12+1218+18

7+77+129+9

9+1812+18

7+97+189+1212+1218+18

7+77+189+99+2112+1818+1821+21

7+97+219+129+2412+2118+2121+24

7+127+249+1812+1212+2418+2424+24

3ROOMS

7+7+77+9+99+9+9

9+12+12

7+7+97+9+129+9+12

12+12+12

7+7+127+12+129+9+18

7+7+77+9+9

7+12+189+9+18

12+12+12

7+7+97+9+129+9+9

9+12+1212+12+18

7+7+127+12+129+9+129+12+18

7+7+77+7+187+9+97+9+217+12+187+18+18

7+7+97+7+217+9+127+9+247+12+217+18+21

7+7+127+7+247+9+187+12+127+12+247+18+24

Maximum combination up to 63

4ROOMS

7+7+7+77+7+7+187+7+9+187+9+9+12

9+9+12+12

7+7+7+97+7+9+9

7+7+12+129+9+9+9

7+7+7+127+7+9+127+9+9+99+9+9+12

7+7+7+77+7+7+187+7+9+97+7+9+217+7+12+187+7+21+217+9+9+12

7+7+7+97+7+7+217+7+9+127+7+9+247+7+12+217+7+21+247+9+9+18

7+7+7+127+7+7+247+7+9+187+7+12+127+7+12+24

7+9+9+97+9+9+21


5ROOMS

7+7+7+7+77+7+7+7+187+7+7+9+9

7+7+7+9+217+7+7+12+187+7+7+18+187+7+9+9+127+7+9+9+24

7+7+9+12+21

7+7+7+7+97+7+7+7+217+7+7+9+127+7+7+9+24

7+7+7+12+217+7+7+18+217+7+9+9+18

7+7+9+12+127+7+9+12+24

7+7+7+7+127+7+7+7+247+7+7+9+18

7+7+7+12+127+7+7+12+24

7+7+9+9+97+7+9+9+21

7+7+9+12+187+7+9+18+18




SPLIT CASSETTE TYPEMUCSR-H6 Series- Design 360°- Models 12 and 18 with compact size.- Drain pump with easy access.- Fresh air intake function.- Ducted outlet for exhaust air in adjacent

room.- Low noise and low-energy consumption

DC fan motor.- Total pipe length of 65 m.- Remote ON/OFF signal and alarm.- Twin function (2x1)- Setting and checking parameters using

remote control RG57- Wireless remote control RG57 included.- Wall-mounted remote control with week

schedule and “Follow me” function that monitors until 16 units at the same timeKJR-120G (2 wires cable) (optional).

- Centralized controller CCM (optional). RG57

DC Inverter DC indoor fan motor.DC outdoor fan motor 30% increased efficiency

ConvenientComfortable

EfficiencyEcologic

SCOP4.0



Different speeds of the external fanAccurate adjustment of fan speed thanks to DC fan.


Twin function (2x1)Two indoor units can be connected to the same outdoor unit. Both indoor units will function identically as if they were one single unit. It is perfect for open rooms.



Wide working temperature rangeCooling operation until 50 °C and in heating until-15 °C.

Design 360°Thanks to the 360° panel design, the air is more evenly distributed.






KJR-120G (Optional)(code CL 94 907)



H6 SPLIT CASSETTE TYPE

SPECIFICATIONSModel MUCSR-12-H6 MUCSR-18-H6 MUCSR-24-H6 MUCSR-30-H6 MUCSR-36-H6

Code CL 20 230 CL 20 231 CL 20 232 CL 20 233 CL 20 234

Cooling

Nominal capacity (min. - max.) kW 3.52(0.62 ~ 4.40)

5.27(0.79 ~ 6.15)

7.03(1.20 ~ 8.21)

8.79(2.08 ~ 10.55)

10.55(2.93 ~ 12.02)

Nominal consumption (min. - max.) W 960(210 ~ 1.692)

1,630(270 ~ 2.365)

2,170(400 ~ 3.155)

2,765(690 ~ 4.055)

4,060(975 ~ 4.620)

Pdesignc kW 3.5 5.3 7.0 8.8 10.5SEER W/W 6.1 6.3 6.1 6.1 6.1Energy labeling A++ A++ A++ A++ A++

Heating


5.57(0.88 ~ 7.03)

7.03(1.20 ~ 8.65)

9.08 (2.08 ~ 10.52)

11.13(2.64 ~ 13.19)

Nominal consumption (min. - max.) W 995(496 ~ 1.830)

1,500(295 ~ 2.510)

1,900(400 ~ 3,090)

2,380(690 ~ 3,755)

3,085(880 ~ 4,690)


Pdesignh(design load) kW 3.6 4.8 5.8 7.9 9.9

SCOP W/W 4.0 4.0 4.0 4.0 4.0Energy labeling A+ A+ A+ A+ A+Tbiv °C -7 -7 -7 -7 -7Tol °C -15 -15 -15 -15 -15

Warm climate zone


SCOP W/W 5.1 5.1 5.1 5.1 5.1Energy labeling A+++ A+++ A+++ A+++ A+++Tbiv °C 2 2 2 2 2Tol °C -15 -15 -15 -15 -15

Indoor unit

Air flow rate (High / Medium / Low) m³/h 650/530/450 660/550/490 1450/1250/1100 1700/1460/1300 1900/1750/1460Sound pressure (High / Medium / Low) dB(A) 42 / 38 / 34 46 / 42 / 38 46 / 42 / 39 53 / 48 / 44 53 / 50 / 47Sound power (High) dB(A) 57 56 61 64 61Drain connection mm Ø25 Ø25 Ø32 Ø32 Ø32Drain pump height (1) mm 750 750 750 750 750Fresh air intake(2) mm Ø65 Ø65 Ø75 Ø75 Ø75

Power supply V-Hz-Ph — 220-240V~ 50Hz, 1Ph

Inner power cable mm² — 2x1.5 + T 2x1.5 + T 2x1.5 + T 2x1.5 + TWireless remote control RG57B2/BGE RG57B2/BGE RG57B2/BGE RG57B2/BGE RG57B2/BGE

DimensionsUnit Body(W x H x D) mm 570x260x570 570x260x570 840x245x840 840x245x840 840x245x840

Panel (W x H x D) mm 647x50x647 647x50x647 950x55x950 950x55x950 950x55x950

WeightUnit kg 16 16.5 24 26.5 25.6Panel kg 2.5 2.5 5 5 5

Outdoor unit

Air flow (High) m³/h 2000 2100 2700 4,300 4,300Sound pressure (High) dB(A) 57 56.5 60.5 59.5 61 Sound power (High) dB(A) 60 64 65 67 66

Compressor (Brand / Model) GMCC / ASM98D32UFZ

GMCC / ASM135D23UFZ

GMCC / ATF235D22UMT

GMCC / ATF235D22UMT

GMCC / ATF310D43UMT


Outdoor power cable mm² 2x2.5 + T 2x2.5 + T 2x2.5 + T 2x4 + T 2x4 + TDimensions (W x H x D) mm 800x554x333 800x554x333 845x702x363 946x810x410 946x810x410Weight kg 34.5 35.5 49 62.9 67.2

Wholeset

Communication cable mm² 4x1.5 2x0.75 (shielded)

Refrigerant

Type R410A R410A R410A R410A R410ALoad kg 1.38 1.78 1.95 2.8 3.2Preload until m 5 5 5 5 5Additional load (from 5 m) g/m 15 15 30 30 30

Design pressure (High / Low) MPa 4.2 / 1.5 4.2 / 1.5 4.2 / 1.5 4.2 / 1.5 4.2 / 1.5

Connection pipes

Liquid / Gas mm (inches)

Ø6.35 / Ø9.52 (1/4" / 3/8")

Ø6.35 / Ø12.7 (1/4" / 1/2")

Ø9.52 / Ø15.9 (3/8" / 5/8")

Ø9.52 / Ø15.9 (3/8" / 5/8")

Ø9.52 / Ø15.9 (3/8" / 5/8")

Max. Length(3) m 25 30 50 50 65Max. Drop Height m 10 20 25 25 30

Operation temperature

Indoor (cooling/heating) °C 17 ~ 32 / 0 ~ 30 Outdoor (Cooling/Heating.) °C -15~50 / -15~24

Notes: (1) Elevation height of condensate water from the unit shaft if elbow is installed horizontally at 200 mm maximum.(2) Inner diameter.(3) Pipes minimum length of 2 m.

* The above design and specifications are subject to change of product improvement without prior notice.** The values of noise level match with values obtained in the anechoic chamber.




SPECIFICATIONSModel MUCSR-42-H6 MUCSR-48-H6 MUCSR-48-H6T MUCSR-60-H6T

Code CL 20 235 CL 20 236 CL 20 237 CL 20 238

Cooling


14.06(3.99 ~ 16.12)

13.77(3.99 ~ 16.12)

15.83(4.98 ~ 18.46)

Nominal consumption (min. - max.) W 4,090(1,070 ~ 5,070)

5,159(1,330 ~ 6,200)

5,159(1,330 ~ 6,200)

6,395(1,660 ~ 7,100)

Pdesignc kW 12.1 14.0 14.0 16.0 SEER W/W 5.6 5.6 5.6 5.6Energy labeling A+ A+ A+ A+

Heating

Nominal capacity (min. - max.) kW 13.48(2.93~14.65)

16.12(4.19~17.59)

15.53(4.19~17.59)

18.17(5.28~20.51)

Nominal consumption (min. - max.) W 3,535(975~5,230)

4,555(1,400~6,765)

4,555(1,400~6,765)

5735(1,760~7320)


Pdesignh(design load) kW 11.0 11.5 11.5 11.5

SCOP W/W 4.0 4.0 4.0 4.0Energy labeling A+ A+ A+ A+Tbiv °C -7 -7 -7 -7Tol °C -15 -15 -15 -15

Warm climate zone


SCOP W/W 5.1 5.1 5.1 5.1Energy labeling A+++ A+++ A+++ A+++Tbiv °C 2 2 2 2Tol °C -15 -15 -15 -15

Indoor unit

Air flow rate (High / Medium / Low) m³/h 1,850/ 1,600/1,400 1,850/1,600/1,400 1,850/1,600/1,400 1,900/1,650/1,450Sound pressure (High / Medium / Low) dB(A) 54 / 51 / 48 53 / 49 / 45 55 / 51 / 48 52 / 49 / 46Sound power (High) dB(A) 64 63 63 68 Drain connection mm Ø32 Ø32 Ø32 Ø32Drain pump height (1) mm 750 750 750 750Fresh air intake(2) mm Ø75 Ø75 Ø75 Ø75Power supply V-Hz-Ph 220-240V~50Hz, 1PhInner power cable mm² 2x1.5 + T 2x1.5 + T 2x1.5 + T 2x1.5 + TWireless remote control RG57B2/BGE RG57B2/BGE RG57B2/BGE RG57B2/BGE

DimensionsUnit Body(W x H x D) mm 840x287x840 840x287x840 840x287x840 840x287x840

Panel (W x H x D) mm 950x55x950 950x55x950 950x55x950 950x55x950

WeightUnit kg 26.1 28 28 31Panel kg 5 5 5 5

Outdoor unit

Air flow (High) m³/h 4,300 6,800 6,800 7,200Sound pressure (High) dB(A) 62.5 65 65 62.5 Sound power (High) dB(A) 71 71 72 74

Compressor (Brand/ Model) GMCC / ATF310D43UMT

GMCC / ATQ420D1UMU

GMCC / ATQ420D1UMU

GMCC / ATQ420D1UMU

Power supply V-Hz-Ph 220-240V~ 50Hz, 1Ph 380-415V~ 50Hz, 3Ph

Outdoor power cable mm² 2 x 6 + T 2 x 6 + T 4 x 2.5 + T 4 x 2.5 + TDimensions (W x H x D) mm 946 x 810 x 410 952 x 1333 x 415 952 x 1333 x 415 952 x 1333 x 415Weight kg 70.5 95.1 108.1 112.8

Wholeset

Communication cable mm² 2x0.75 (shielded)

Refrigerant

Type R410A R410A R410A R410ALoad kg 3.65 4 4 4.3Preload until m 5 5 5 5Additional load(from 5 m) g/m 30 30 30 30

Design pressure (High / Low) MPa 4.2 / 1.5 4.2 / 1.5 4.2 / 1.5 4.2 / 1.5

Connection pipes

Liquid / Gas mm (inches)

Ø9.52 / Ø15.9(3/8" / 5/8")

Max. Length(3) m 65Max. Drop Height m 30


Indoor (cooling/heating) °C 17 ~ 32 / 0 ~ 30 Outdoor (Cooling/Heating) °C -15 ~ 50 / -15 ~ 24

Notes: (1) Elevation height of condensate water from the unit shaft if elbow is installed horizontally at 200 mm maximum.(2) Inner diameter.(3) Pipes minimum length of 2 m.





CENTRALIZED CONTROLLER CONNECTION

Note: The communication cable cannot be used to supplyneither the indoor nor the outdoor unit.

OPTIONS OF CENTRALIZED CONTROLLER CCM

CCM30 (CL92871) –> New standard centralized controller

CCM03 (CL92911) –> Standard centralized controller

CCM15 (CL92872) –> Centralized controller web / Wifi

(For more information see control systemsin MVD Range)

CENTRALIZEDCONTROL

CCM

64 uts. max.

H: VerticalB: Total

CONNECTION PIPES AND ADDITIONAL REFRIGERANT LOAD

ModelPipe Max. distance Additional

Load(g/m)

Preloadup to(m)Gas Liquid A B

MUCSR-12-H6 3/8" 1/4" 10 25 15 5

MUCSR-18-H6 1/2" 1/4" 20 30 15 5

MUCSR-24-H6 5/8" 3/8" 25 50 30 5

MUCSR-30-H6 5/8" 3/8" 25 50 30 5

MUCSR-36-H6 5/8" 3/8" 30 65 30 5

MUCSR-42-H6 5/8" 3/8" 30 65 30 5

MUCSR-48-H6 5/8" 3/8" 30 65 30 5

MUCSR-48-H6T 5/8" 3/8" 30 65 30 5

MUCSR-60-H6T 5/8" 3/8" 30 65 30 5

ELECTRICAL WIRING

ModelPower supply Interconnection

Unit Phases IndoorA

OutdoorB C

MUCSR-12-H6 OUTDOOR SINGLE – 3x2.5 4x1.5

MUCSR-18-H6 IND / OUT SINGLE / SINGLE 3x1.5 3x2.5

2x0.75 (Shielded)

MUCSR-24-H6 IND / OUT SINGLE / SINGLE 3x1.5 3x2.5

MUCSR-30-H6 IND / OUT SINGLE / SINGLE 3x1.5 3x4




MUCSR-48-H6T IND / OUT SINGLE / THREE 3x1.5 5x2.5

MUCSR-60-H6T IND / OUT SINGLE / THREE 3x1.5 5x2.5



SPLIT CASSETTE TYPE H6

Twin Cassette System (2x1)

Model MUCSR-18X2-H6 MUCSR-24X2-H6 MUCSR-24X2-H6T MUCSR-30X2-H6T

Code CL 20 924 CL 20 925 CL 20 926 CL 20 927

Total capacity Cooling / Heating kW 10.55 / 11.13 14.06 / 16.12 13.77 / 15.53 15.83 / 18.17

Indoor uts.

Model MUCSR-18-H6 MUCSR-24-H6 MUCSR-24-H6T MUCSR-30-H6T

CodeBody UI 20 231 UI 20 232 UI 20 232 UI 20 233

Panel UI 20 231 UI 20 232 UI 20 232 UI 20 233

Amount 2 2 2 2

Individual capacity (Cooling / Heating) kW 5.28 / 5.57 6.89 / 7.76 6.89 / 7.76 8.06 / 9.08

Power supply 220-240V - 50Hz, 1Ph

Unit Exterior

Model MUCSR-36-H6 MUCSR-48-H6 MUCSR-48-H6T MUCSR-60-H6T

Code UE20234 UE20236 UE20237 UE20238

Amount 1 1 1 1

Power supply 220-240V - 50Hz, 1Ph 380-415V - 50Hz, 3Ph

Branch Pipe

Model FQZHN-01D FQZHN-01D FQZHN-01D FQZHN-01D

Code TF03611 TF03611 TF03611 TF03611

Amount 1 1 1 1

Connection pipes

Unit Out. Unit to distributor (Liq./Gas) inch. 3/8" - 5/8" 3/8" - 5/8" 3/8" - 5/8" 3/8" - 5/8"

Unit Ind. Unit to distributor (Liq./Gas) inch. 1/4" - 1/2" 3/8" - 5/8" 3/8" - 5/8" 3/8" - 5/8"

Communication cable (1) mm² 2x0.75 (shielded)

Note: (1) The cable has to be wired up from the outdoor unit to the Master indoor unit, then from the Master to the Slave indoor unit.

The indoor units have to be set up as Master and Slave. They can be set up using the Micro-switch on the indoor PCB or using the remote control RG57.

IMPORTANT: In Twin systems, the indoor units ALWAYS work together and uniformly. THEY CANNOT WORK INDEPENDENTLY.

SYSTEM 2x1,enables connectionof 2 INDOOR UNITS

of identical capacityto a SINGLE

OUTDOOR UNIT

+ + +

Twin systems Cassette (2x1) includes: - 1 Outdoor unit (axial).- 2 Cassette indoor units with identical capacity.- 1 Branch Pipe FQZHN-01D.



SPLIT TYPE CELILING - FLOOR MUSTR-H6 Series

- Wide range of air distribution.- Fresh air intake function.- Low noise and low-energy consumption

DC fan motor.- Total pipe length of 65 m.- Remote ON/OFF signal and alarm.- Twin function (2x1)- Setting and checking parameters using

remote control RG57.- Wireless remote control RG57 included.- Wall-mounted remote control with week

schedule and “Follow me” function that monitors up to 16 units at the same time KJR-120G (2 wires cable) (optional)

- Centralized controller CCM (optional).

KJR-120G (Optional)(code CL 94 907)

RG57









Horizontal and vertical blade swingBetter air distribution thanks to the automatic blade swing, horizontal and vertical.








EfficiencyEcologic

SCOP4.0



SPLIT TYPE CEILING-FLOOR H6

SPECIFICATIONSModel MUSTR-18-H6 MUSTR-24-H6 MUSTR-30-H6 MUSTR-36-H6

Code CL 20 241 CL 20 242 CL 20 243 CL 20 244

Cooling

Nominal capacity (min. - max.) kW 5.28 (0.79 ~ 6.15) 7.03 (1.20 ~ 8.21) 8.79 (2.08 ~ 10.55) 10.55 (2.93 ~ 12.02)Nominal consumption (min. - max.) W 1,630 (270 ~ 2,365) 2,285 (400 ~ 3,155) 2,960 (690 ~ 4,055) 4,060 (975 ~ 4,620)Nominal current (min. - max.) A 7.5 (1.2 ~ 10.9) 10.4 (1.8 ~ 14.4) 13.5 (3.2 ~ 18.5) 17.6 (4.2 ~ 20.1)Pdesignc kW 5.3 7.0 8.8 10.5SEER W/W 6.5 6.1 6.1 6.3Energy labeling A++ A++ A++ A++

Heating

Nominal capacity (min. - max.) kW 5.67 (0.88 ~ 7.03) 7.03 (1.20 ~ 8.65) 9.38 (2.08 ~ 10.84) 11.13 (2.64 ~ 13.19)Nominal consumption (min. - max.) W 1,460 (255 ~ 2,510) 1,900 (400 ~ 3,090) 2,475 (690 ~ 3,870) 2,985 (880 ~ 4,690)Nominal current (min. - max.) A 6.7 (1.20 ~ 11.50) 8.7 (1.8 ~ 14.1) 11.3 (3.2 ~ 17.7) 13.0 (3.8 ~ 20.4)



SCOP W/W 4.0 4.0 4.0 4.0Energy labeling A+ A+ A+ A+Tbiv (Bivalent Temp.) °C -7 -7 -7 -7Tol °C -15 -15 -15 -15

Warm climate zone



Indoor unit

Air flow (High/Medium/Low) m³/h 900 / 800 / 700 1,180 / 1,050 / 850 1,650 / 1,450 / 1,250 2,048 / 1,767 / 1,403Sound pressure (High / Medium / Low) dB(A) 44 / 39 / 34 53 / 48 / 42 54 / 49 / 44 52 / 46 / 40

Sound power (High) dB(A) 57 63 64 63Drain connection mm Ø25 Ø25 Ø25 Ø25Fresh air intake(1) mm Ø120 Ø120 Ø120 Ø120Power supply V-Hz-Ph 220-240V~ 50Hz, 1PhInner power cable mm² 2 x 1.5 + T 2 x 1.5 + T 2 x 1.5 + T 2 x 1.5 + TWireless remote control RG57B2/BGE RG57B2/BGE RG57B2/BGE RG57B2/BGEDimensions (W x H x D) mm 1,068 x 235 x 675 1,068 x 235 x 675 1,285 x 235 x 675 1,650 x 235 x 675Weight kg 25.8 25 31 40.3

Outdoor unit

Air flow (High) m³/h 2,100 2,700 4,300 4,300Sound pressure (High) dB(A) 56.5 60.5 59.5 61 Sound power (High) dB(A) 65 65 66 66


GMCC / ATF235D22UMT

GMCC / ATF235D22UMT

GMCC / ATF310D43UMT

Power supply V-Hz-Ph 220-240V~ 50Hz, 1PhOutdoor power cable mm² 2 x 2.5 + T 2 x 2.5 + T 2 x 4 + T 2 x 4 + TDimensions (W x H x D) mm 800 x 554 x 333 845 x 702 x 363 946 x 810 x 410 946 x 810 x 410Weight kg 35.5 49 62.9 67.2

Wholeset

Communication cable mm² 2 x 0.75 (shielded)

Refrigerant

Type R410A R410A R410A R410ALoad kg 1.78 1.95 2.8 3.2Preload until m 5 5 5 5Additional load(from 5 m) g/m 15 30 30 30

Design pressure MPa 4.2 / 1.5 4.2 / 1.5 4.2 / 1.5 4.2 / 1.5

Connection pipes

Liquid / Gas mm (inch)

Ø6.35 / Ø12.7 (1/4" / 1/2")

Ø9.52 / Ø15.9 (3/8" / 5/8")

Ø9.52 / Ø15.9 (3/8" / 5/8")

Ø9.52 / Ø15.9 (3/8" / 5/8")

Max. Length(2) m 30 50 50 65Max. Drop Height m 20 25 25 30


Indoor(cooling/heating) °C 17 ~ 32 / 0 ~ 30 17 ~ 32 / 0 ~ 30 17 ~ 32 / 0 ~ 30 17 ~ 32 / 0 ~ 30

Outdoor(Cooling/Heating.) °C -15 ~ 50 / -15 ~ 24 -15 ~ 50 / -15 ~ 24 -15 ~ 50 / -15 ~ 24 -15 ~ 50 / -15 ~ 24

Notes: (1) (1*) Inner diameter(2) Pipes minimum length of 2 m.





SPECIFICATIONSModel MUSTR-42-H6 MUSTR-48-H6 MUSTR-48-H6T MUSTR-60-H6T

Code CL 20 245 CL 20 246 CL 20 247 CL 20 248

Cooling

Nominal capacity (min. - max.) kW 12.31 (3.22 ~ 13.19) 14.07 (4.10 ~ 16.41) 14.07 (4.10 ~ 16.41) 15.82 (4.98 ~ 18.11)Nominal consumption (min. - max.) W 4,230 (1,070 ~ 5,070) 5,190 (1,370 ~ 6,310) 5,190 (1,370 ~ 6,310) 6,060 (1,660 ~ 6,965)Nominal current (min. - max.) A 18.4 (4.6 ~ 22.0) 22.5 (6.0 ~ 27.4) 9.0 (2.4 ~ 10.9) 10.5 (2.9 ~ 12.0)Pdesignc kW 12.1 14.0 14.0 16.0 SEER W/W 6.1 6.1 6.1 6.1Energy labeling A++ A++ A++ A++

Heating

Nominal capacity (min. - max.) kW 13.50 (3.00 ~ 14.70) 16.41 (4.40 ~ 18.46) 16.41 (4.40 ~ 18.46) 18.17 (5.28 ~ 20.51)Nominal consumption (min. - max.) W 3,540 (945 ~ 5,000) 4,810 (1,465 ~ 6,590) 4,810 (1,465 ~ 6,590) 5,645 (1,760 ~ 7,320)Nominal current (min. - max.) A 15.3 (4.1 ~ 21.7) 20.9 (6.4 ~ 28.6) 8.3 (2.5 ~ 11.4) 9.7 (3.0 ~ 12.6)



SCOP W/W 4.0 4.0 4.0 4.0Energy labeling A+ A+ A+ A+Tbiv °C -7 -7 -7 -7Tol (Operating limited temp.) °C -15 -15 -15 -15

Warm climate zone



Indoor unit

Air flow rate (High / Medium / Low) m³/h 2,271 / 1,886 / 1,364 2,100 / 1,800 / 1,400 2,100 / 1,800 / 1,400 2,250 / 1,660 / 1,280Sound pressure (High / Medium / Low) dB(A) 55 / 49 / 43 52 / 46 / 41 56 / 48 / 41 55 / 50 / 45Sound power (High) dB(A) 67 67 66 70 Drain connection mm Ø25 Ø25 Ø25 Ø25Fresh air intake(1) mm Ø120 Ø120 Ø120 Ø120Power supply V-Hz-Ph 220-240V~ 50Hz, 1PhInner power cable mm² 2 x 1.5 + T 2 x 1.5 + T 2 x 1.5 + T 2 x 1.5 + TWireless remote control RG57B2/BGE RG57B2/BGE RG57B2/BGE RG57B2/BGEDimensions (W x H x D) mm 1,650 x 235 x 675 1,650 x 235 x 675 1,650 x 235 x 675 1,650 x 235 x 675Weight kg 40.5 38.2 38.2 40.5

Outdoor unit


Compressor (Brand / Model) GMCC / ATF310D43UMT

GMCC / ATQ420D1UMU

GMCC / ATQ420D1UMU

GMCC / ATQ420D1UMU

Power supply V-Hz-Ph 220-240V~ 50Hz, 1Ph 380-415V~ 50Hz, 3PhOutdoor power cable mm² 2 x 6 + T 2 x 6 + T 4 x 2.5 + T 4 x 2.5 + TDimensions (W x H x D) mm 946 x 810 x 410 952 x 1333 x 415 952 x 1333 x 415 952 x 1333 x 415Weight kg 70.5 95.1 108.1 112.8

Wholeset


Refrigerant

Type R410A R410A R410A R410ALoad kg 3.65 4 4 4.3Preload until m 5 5 5 5Additional load(from 5 m) g/m 30 30 30 30


Connection pipes


Ø9.52 / Ø15.9(3/8" / 5/8")

Ø9.52 / Ø15.9(3/8" / 5/8")

Ø9.52 / Ø15.9(3/8" / 5/8")

Ø9.52 / Ø15.9(3/8" / 5/8")



Indoor(cooling/heating) °C 17 ~ 32 / 0 ~ 30 17 ~ 32 / 0 ~ 30 17 ~ 32 / 0 ~ 30 17 ~ 32 / 0 ~ 30

Outdoor(Cooling/Heating) °C -15 ~ 50 / -15 ~ 24 -15 ~ 50 / -15 ~ 24 -15 ~ 50 / -15 ~ 24 -15 ~ 50 / -15 ~ 24

Notes: (1) Inner diameter.(2) Pipes minimum length of 2 m.











(For more information see control systems in MVD Range)

CENTRALIZEDCONTROL

CCM

64 uts. max.

H: VerticalB: Total



Load(g/m)


MUSTR-12-H6 3/8" 1/4" 10 25 15 5

MUSTR-18-H6 1/2" 1/4" 20 30 15 5

MUSTR-24-H6 5/8" 3/8" 25 50 30 5

MUSTR-30-H6 5/8" 3/8" 25 50 30 5

MUSTR-36-H6 5/8" 3/8" 30 65 30 5

MUSTR-42-H6 5/8" 3/8" 30 65 30 5

MUSTR-48-H6 5/8" 3/8" 30 65 30 5

MUSTR-48-H6T 5/8" 3/8" 30 65 30 5

MUSTR-60-H6T 5/8" 3/8" 30 65 30 5

ELECTRICAL WIRING


Unit Phases IndoorA

OutdoorB C

MUSTR-18-H6 IND / OUT SINGLE / SINGLE 3x1.5 3x2.5

2x0.75 (Shielded)

MUSTR-24-H6 IND / OUT SINGLE / SINGLE 3x1.5 3x2.5

MUSTR-30-H6 IND / OUT SINGLE / SINGLE 3x1.5 3x4




MUSTR-48-H6T IND / OUT SINGLE / THREE 3x1.5 5x2.5

MUSTR-60-H6T IND / OUT SINGLE / THREE 3x1.5 5x2.5

MUSTR-H6



FLOOR-CEILING SPLIT TYPE H6

Twin Floor-Ceiling System (2x1)

Model MUSTR-18X2-H6 MUSTR-24X2-H6 MUSTR-24X2-H6T MUSTR-30X2-H6T

Code CL 20 932 CL 20 933 CL 20 934 CL 20 935


Pcs. Indoor uts.

Model MUSTR-18-H6 MUSTR-24-H6 MUSTR-24-H6 MUSTR-30-H6

Code UI20241 UI20242 UI20242 UI20243

Amount 2 2 2 2


Power supply 220-240V~ 50Hz, 1Ph

Unit Exterior

Model MUSTR-36-H6 MUSTR-48-H6 MUSTR-48-H6T MUSTR-60-H6T

Code UE20244 UE20246 UE20247 UE20248

Amount 1 1 1 1

Power supply 220-240V~ 50Hz, 1Ph 380-415V~ 50Hz, 3Ph

Branch Pipe


Code TF03611 TF03611 TF03611 TF03611

Amount 1 1 1 1

Connection pipes



Communication cable (1) mm² 2 x 0.75 (shielded)




+ + +

Twin Floor-Ceiling Systems (2x1) include: - 1 Outdoor unit (axial)- 2 Indoor units ceiling-floor with the same capacity.- 1 Branch Pipe FQZHN-01D



OUTDOOR UNIT



DUCT SPLIT TYPEMUCR-H6 Series- Low silhouette duct.- Configurable rear (by default) or bottom

air intake.- Drain pump with easy access.- Fresh air intake function.- Low noise and low-energy consumption

DC fan motor.- Total pipe length of 65 m.- Remote ON/OFF signal and alarm.- Twin function (2x1)- Adjustment of static pressure and other

parameters using the PCB or the wireless remote control RG57 (optional)

- Wall controller with weekly schedule and “Follow me” function that can control upto 16 units together KJR-120G (2 wires) included.

- Wireless remote control RG 57 (optional).- Centralized controller CCM (optional).



EfficiencyEcologic

SCOP4.0

KJR-120G RG57 (Optional) (code: CL94774).






Configurable static pressureThe static pressure of the fan can be adjusted using the PCB or the wireless control RG57. In this way, the machine can be adapted to each installation.




Configurable returnThe air intake can be set up either at the rear or at the bottom of the unit. By default, it is set up at the rear.





Follow Me FunctionThe wall-mounted wire control adds a temperature sensor.




SPLIT DUCT TYPE H6

SPECIFICATIONSModel MUCR-12-H6 MUCR-18-H6 MUCR-24-H6 MUCR-30-H6 MUCR-36-H6

Code CL 20 250 CL 20 251 CL 20 252 CL 20 253 CL 20 254

Cooling


5.28(0.79 ~ 6.15)

7.03(1.20 ~ 8.21)

8.79(2.08 ~ 10.55)

10.55(2.93 ~ 12.02)

Nominal consumption (min. - max.) W 1,030

(210 ~ 1,690)1,685

(260 ~ 2,365)2,285

(400 ~ 3,155)2,875

(690 ~ 4,055)3,965

(975 ~ 4,620)Nominal current (min. - max.) A 4.7 (1.0 ~ 7.7) 7.7 (1.2 ~ 10.80) 10.4 (1.8 ~ 14.4) 13.1 (3.2 ~ 18.5) 18.1 (4.2 ~ 20.1)Pdesignc kW 3.5 5.3 7.0 8.8 10.5SEER W/W 6.1 6.5 6.1 6.1 6.3Energy labeling A++ A++ A++ A++ A++

Heating


5.57(0.88 ~ 7.03)

7.03(1.20 ~ 8.65)

9.38(2.08 ~ 10.84)

11.13(2.64 ~ 13.19)

Nominal consumption (min. - max.) W 995

(496 ~ 1,790)1,460

(290 ~ 2,510)1,900

(400 ~ 3,090)2,460

(690 ~ 3,870)2,923

(880 ~ 4,690)Nominal current (min. - max.) A 4.5 (2.3 ~ 8.2) 6.7 (1.3 ~ 11.5) 8.7 (1.8 ~ 14.1) 11.2 (3.2 ~ 17.7) 13.4 (3.8 ~ 20.4)



SCOP W/W 4.0 4.0 4.0 4.0 4.0Energy labeling A+ A+ A+ A+ A+Tbiv °C -7 -7 -7 -7 -7Tol °C -15 -15 -15 -15 -15

Warm climate zone


SCOP W/W 5.1 5.1 5.1 5.1 5.1Energy labeling A+++ A+++ A+++ A+++ A+++Tbiv °C 2 2 2 2 2Tol °C -15 -15 -15 -15 -15

Indoor unit

Air flow rate (High / Medium / Low) m³/h 680/580/450 1050/900/780 1360/1200/970 1580/1400/1100 1750/1500/1280Static pressure

Rated Pa 25 25 25 37 37Configurable (1) Pa 0 ~ 45 0 ~ 100 0 ~ 100 0 ~ 100 0 ~ 100

Sound pressure (High / Medium / Low) dB(A) 42 / 38 / 35 44 / 40 / 37 46 / 42 / 38 50 / 48 / 44 48 / 45 / 40Sound power (High) dB(A) 54 58 62 65 58Drain connection mm Ø25 Ø25 Ø25 Ø25 Ø25Drain pump height (2) mm 750 750 750 750 750Fresh air intake(3) mm Ø90 Ø90 Ø90 Ø125 Ø125

Power supply V-Hz-Ph — 220-240V~ 50Hz, 1Ph

Inner power cable mm² — 2 x 1.5 + T 2 x 1.5 + T 2 x 1.5 + T 2 x 1.5 + TWired remote control KJR-120G KJR-120G KJR-120G KJR-120G KJR-120GDimensions (W x H x D) mm 700x210x635 920x270x635 920x270x635 1140x270x775 1200x300x865Weight kg 18.4 26.9 28 35 45

Outdoor unit

Air flow (High) m³/h 2000 2100 2700 4,300 4,300Sound pressure (High) dB(A) 57 56.5 60.5 59.5 61 Sound power (High) dB(A) 60 64 65 66 66


GMCC / ASM135D23UFZ

GMCC / ATF235D22UMT

GMCC / ATF235D22UMT

GMCC/ATF310D43UMT


Outdoor power cable mm² 2 x 2.5 + T 2 x 2.5 + T 2 x 2.5 + T 2 x 4 + T 2 x 4 + TDimensions (W x H x D) mm 800 x 554 x 333 800 x 554 x 333 845 x 702 x 363 946 x 810 x 410 946 x 810 x 410Weight kg 34.5 35.5 49 62.9 67.2

Wholeset

Communication cable mm² 4 x 1.5 2 x 0.75 (shielded)

RefrigerantR410A

Load kg 1.38 1.78 1.95 2.8 3.2Preload until m 5 5 5 5 5Additional load(from 5 m) g/m 15 15 30 30 30

Design pressure MPa 4.2 / 1.5 4.2 / 1.5 4.2 / 1.5 4.2 / 1.5 4.2 / 1.5

Connection pipes


Ø6.35 / Ø9.52 (1/4" / 3/8")

Ø6.35 / Ø12.7 (1/4" / 1/2")

Ø9.52 / Ø15.9 (3/8" / 5/8")

Ø9.52 / Ø15.9 (3/8" / 5/8")

Ø9.52 / Ø15.9 (3/8" / 5/8")

Max. Length(4) m 25 30 50 50 65Max. Drop Height m 10 20 25 25 30


Indoor(cooling/heating) °C 17~32 / 0~30 17~32 / 0~30 17~32 / 0~30 17~32 / 0~30 17~32 / 0~30

Outdoor(Cooling/Heating) °C -15~50 /

-15~24-15~50 / -15~24

-15~50 / -15~24

-15~50 / -15~24

-15~50 / -15~24

Notes: (1) Configurable pressure via micro-switch ENC2 PCB on the indoor unit. (2) Pump height measured from the unit shaft. The elbow is set horizontally at 200 mm maximum. (3) Inner diameter. (4) Pipes minimum length of 2 m.*The above design and specifications are subject to change of product improvement without prior notice.



SPLIT DUCT TYPE H6

SPECIFICATIONSModel MUCR-42-H6 MUCR-48-H6 MUCR-48-H6T MUCR-60-H6T

Code CL 20 255 CL 20 256 CL 20 257 CL 20 258

Cooling


14.07(4.10 ~ 16.41)

14.07(4.10 ~ 16.41)

15.82(4.98 ~ 18.11)

Nominal consumption(min. - max.) W 4,090

(1,070 ~ 5,070)5,115

(1,370 ~ 6,310)5,115

(1,370 ~ 6,310)5,255

(1,660 ~ 6,965)Nominal current (min. - max.) A 17.8 (4.6 ~ 22.0) 23.4 (5.9 ~ 27.4) 8.8 (2.4 ~ 10.9) 9.1 (2.9 ~ 12.0)Pdesignc kW 12.1 14.0 14.0 16.0SEER W/W 5.6 6.1 6.1 6.1Energy labeling A+ A++ A++ A++

Heating


16.12(4.34 ~ 18.13)

16.12(4.34 ~ 18.13)

18.17(5.28 ~ 20.51)

Nominal consumption(min. - max.) W 3,535

(975 ~ 5,230)4,355

(1,445 ~ 6,475)4,355

(1,445 ~ 6,475)5,033

(1,760 ~ 7,320)Nominal current (min. - max.) A 15.4 (4.2 ~ 22.7) 19.9 (6.2 ~ 28.1) 7.5 (2.5 ~ 11.2) 8.7 (3.0 ~ 12.6)



SCOP W/W 4.0 4.0 4.0 4.0Energy labeling A+ A+ A+ A+Tbiv °C -7 -7 -7 -7Tol °C -15 -15 -15 -15

Warm climate zone



Indoor unit

Air flow rate (High / Medium / Low) m³/h 2200/1900/1600 2200/1900/1600 2200/1900/1600 2200/1900/1600Static pressure

Rated Pa 50 50 50 50Configurable (1) Pa 0 ~ 100 0 ~ 100 0 ~ 100 0 ~ 100

Sound pressure (High / Medium / Low) dB(A) 50 / 47 / 44 51 / 48 / 45 50 / 47 / 44 50 / 47 / 45Sound power (High) dB(A) 68 68 68 69 Drain connection mm Ø25 Ø25 Ø25 Ø25Drain pump height (2) mm 750 750 750 750Fresh air intake(3) mm Ø125 Ø125 Ø125 Ø125


Inner power cable mm² 2 x 1.5 + T 2 x 1.5 + T 2 x 1.5 + T 2 x 1.5 + TWired remote control KJR-120G KJR-120G KJR-120G KJR-120GDimensions (W x H x D) mm 1200 x 300 x 865 1200 x 300 x 865 1200 x 300 x 865 1200 x 300 x 865Weight kg 43.4 43.2 43.2 43.1

Outdoor unit


Compressor (Brand / Model) GMCC / ATF310D43UMT

GMCC / ATQ420D1UMU

GMCC / ATQ420D1UMU

GMCC / ATQ420D1UMU

Power supply V-Hz-Ph 220-240V ~ 50Hz, 1Ph 380-415V ~ 50Hz, 3Ph

Outdoor power cable mm² 2 x 6 + T 2 x 6 + T 4 x 2.5 + T 4 x 2.5 + TDimensions (W x H x D) mm 946 x 810 x 410 952 x 1333 x 415 952 x 1333 x 415 952 x 1333 x 415Weight kg 70.5 95.1 108.1 112.8

Wholeset


RefrigerantR410A

Load kg 3.65 4 4 4.3Preload until m 5 5 5 5Additional load(from 5 m) g/m 30 30 30 30


Connection pipes


Ø9.52 / Ø15.9(3/8" / 5/8")

Ø9.52 / Ø15.9(3/8" / 5/8")

Ø9.52 / Ø15.9(3/8" / 5/8")

Ø9.52 / Ø15.9(3/8" / 5/8")



Indoor (cooling/heating) °C 17 ~ 32 / 0 ~ 30 17 ~ 32 / 0 ~ 30 17 ~ 32 / 0 ~ 30 17 ~ 32 / 0 ~ 30

Outdoor (Cooling/Heating) °C -15 ~ 50 / -15 ~ 24 -15 ~ 50 / -15 ~ 24 -15 ~ 50 / -15 ~ 24 -15 ~ 50 / -15 ~ 24

Notes: (1) Configurable pressure via micro-switch ENC2 PCB on the indoor unit. (2) Pump height measured from the unit shaft. The elbow is set horizontally at 200 mm maximum. (3) Inner diameter. (4) Pipes minimum length of 2 m.*The above design and specifications are subject to change of product improvement without prior notice.



SPLIT DUCT TYPE H6







(For more information see control systems in MVD Range)

CENTRALIZEDCONTROL

CCM

64 uts. max.

H: VerticalB: Total



Load(g/m)


MUCR-12-H6 3/8" 1/4" 10 25 15 5

MUCR-18-H6 1/2" 1/4" 20 30 15 5

MUCR-24-H6 5/8" 3/8" 25 50 30 5

MUCR-30-H6 5/8" 3/8" 25 50 30 5

MUCR-36-H6 5/8" 3/8" 30 65 30 5

MUCR-42-H6 5/8" 3/8" 30 65 30 5

MUCR-48-H6 5/8" 3/8" 30 65 30 5

MUCR-48-H6T 5/8" 3/8" 30 65 30 5

MUCR-60-H6T 5/8" 3/8" 30 65 30 5

ELECTRICAL WIRING


Unit Phases IndoorA

OutdoorB C

MUCR-12-H6 OUTDOOR SINGLE – 3x2.5 4x1.5

MUCR-18-H6 IND / OUT SINGLE / SINGLE 3x1.5 3x2.5

2x0.75 (Shielded)

MUCR-24-H6 IND / OUT SINGLE / SINGLE 3x1.5 3x2.5

MUCR-30-H6 IND / OUT SINGLE / SINGLE 3x1.5 3x4




MUCR-48-H6T IND / OUT SINGLE / THREE 3x1.5 5x2.5

MUCR-60-H6T IND / OUT SINGLE / THREE 3x1.5 5x2.5



SPLIT DUCT TYPE H6

Ducted Twin System (2x1)

Model MUCR-18X2-H6 MUCR-24X2-H6 MUCR-24X2-H6T MUCR-30X2-H6T

Code CL 20 928 CL 20 929 CL 20 930 CL 20 931


Pcs. Indoor uts.

Model MUCR-18-H6 MUCR-24-H6 MUCR-24-H6 MUCR-30-H6

Code UI20251 UI20252 UI20252 UI20253

Amount 2 2 2 2


Power supply 220-240V~ 50Hz, 1Ph

Unit Exterior

Model MUCR-36-H6 MUCR-48-H6 MUCR-48-H6T MUCR-60-H6T

Code UE20254 UE20256 UE20257 UE20258

Amount 1 1 1 1

Power supply 220-240V~ 50Hz, 1Ph 380-415V~ 50Hz, 3Ph

Branch Pipe


Code TF03611 TF03611 TF03611 TF03611

Amount 1 1 1 1

Connectionpipes



Communication cable (1) mm² 2 x 0.75 (shielded)






OUTDOOR UNIT

Duct Twin Systems (2x1) includes: - 1 Outdoor unit (axial)- 2 duct indoor units with identical capacity duct.- 1 branch pipe FQZHN-01D.

+ + +



DUCT INVERTER SPLIT GREAT CAPACITY MUCHR-H6 Series- Outdoor unit front discharge.- DC Inverter Compressor.- Accurate temperature control.- High static pressure.- Wall control with “Follow me”

function KJR-29B included.- Wall control with week schedule

KJR-120C (optional).- Centralized controller CCM (optional).

TECHNICAL SPECIFICATIONSMODEL MUCHR-20-H6 MUCHR-22-H6 MUCHR-26-H6 MUCHR-40-H6 MUCHR-45-H6

Code CL 23 904 CL 23 905 CL 23 906 CL 23 912 CL 23 913

Cooling (1)Capacity kW 19.66 22.53 25.95 38.96 43.95

Kcal/h 16,910 19,378 22,320 33,509 37,801Consumption kW 6.90 7.60 8.40 14.60 16.30EER kW 2.85 2.96 3.09 2.67 2.70

Heating (2)Capacity kW 19.86 22.18 25.78 41.35 45.38

Kcal/h 17,082 19,077 22,174 35,565 39,031Consumption kW 6.90 6.70 8.40 13.80 15.40COP kW 2.88 3.31 3.07 3.00 2.95

Indoorunit

MVD model- 200T1/DHN1-B 250T1/DHN1-B 280T1/DHN1-B D400T1/N1 D450T1/N1Code CL23381 CL23382 CL23383 CL23184 CL23185Power supply F, V, Hz 1N-, 220-240V, 50HzMax. current A 6 6 6 12.5 12.5Air Flow (High / Medium / Low) m³/h 4.820 / 4.660 / 4.620 4.820 / 4.660 / 4.620 4.820 / 4.660 / 4.620 7.474 / 6.072 / 4.995 7.474 / 6.072 / 4.995Static pressure avail. (ESP) Pa 62 (40 – 200) 62 (40 – 200) 62 (40 – 200) 200 (50 – 280) 200 (50 – 280)Sound pressure (High / Medium / Low) (3) dB(A) 57 / 53 / 50 57 / 53 / 50 57 / 53 / 50 61 / 59 / 56 61 / 59 / 56Dimensions (W x H x D) mm 1443 x 470 x 810 1443 x 470 x 810 1443 x 470 x 810 1970 x 668 x 902.5 1970 x 668 x 902.5Weight kg 108 108 108 232 232Drain connection mm Ø32 Ø32 Ø32 Ø32 Ø32Power cable(5) mm² 2 x 2.5 + T 2 x 2.5 + T 2 x 2.5 + T 2 x 4 + T 2 x 4 + T

OutdoorUnit

MVD model- V200W/DRN1 V224W/DRN1 V260W/DRN1 V400W/DRN1 V450W/DRN1Code CL23269 CL23270 CL23271 CL23272 CL23273Power supply F, V, Hz 3N-, 400V, 50Hz 3N-, 400V, 50Hz 3N-, 400V, 50Hz 3N-, 400V, 50Hz 3N-, 400V, 50HzMax. current A 14.50 17.20 18.70 33.00 44.00Air flow rate m³/h 10,999 10,494 10,494 16,575 16,575Static pressure avail. (ESP) Pa 0 0 0 0 0Sound pressure (4) dB(A) 59 59 60 62 62Dimensions (W x H x D) mm 1120 x 1558 x 414 1120 x 1558 x 414 1120 x 1558 x 414 1360 x 1650 x 540 1460 x 1650 x 540Weight kg 137 147 147 240 275Power cable(5) mm² 4 x 6 + T 4 x 6 + T 4 x 6 + T 4 x 16 + T 4 x 16 + T

RefrigerantType R410A R410A R410A R410A R410APreloaded amount kg 4.8 6.2 6.2 9.0 12.0Additional load (from 0 m) kg/m 0.057 0.057 0.057 0.110 0.110

Connection pipes

Liquid Line mm (inches) 9.52 (3/8") 9.52 (3/8") 9.52 (3/8") 12.7 (1/2") 12.7 (1/2")Gas Line mm (inches) 19.1 (3/4") 22.2 (7/8") 22.2 (7/8") 28,6 (1 1/8") 28,6 (1 1/8")

RefrigerationDistances (6)

Max. Vertical m 30 30 30 30 30Total m 60 60 60 250 250


Remote control Model KJR-29B KJR-29B KJR-29B KJR-29B KJR-29BType Wiring Wiring Wiring Wiring Wiring

Temp. Range Operation

Cooling °C -15 to 46 -15 to 46 -15 to 46 -5 to 48 -5 to 48Heating °C -15 to 24 -15 to 24 -15 to 24 -15 to 24 -15 to 24

Notes: (1) Nominal cooling conditions: Indoor 27 °C DB, 19 °C WB and outdoor 35 °C DB, pipe length of 8 m and a height difference of 0 m. (2) Nominal cooling conditions: Indoor 20 °C DB, 15 °C WB and outdoor 7 °C DB, pipe length of 8 m and a height difference of 0 m. (3) Noise level measured in anechoic chamber at 1 m front distance and 1.4 m height. (4) Noise level measured in anechoic chamber at 1 m distance front and 1.2 m high (1.3 m for models from 20 to 26 kW). (5) Power wiring recommended for L < 20 m, for longer distances it should be calculated. (6) Pipe length when outdoor unit is lower installed than the indoor units. Otherwise instead of 30 m is 20 m.Caution: - Before starting up the equipment (and without supply), you have to configure the whole micro-switch S6 in OFF position in the outdoor unit.

- Models 40 and 45 do not include air filter.

Qualitymotor

Highprotection

HighPressure

Servicingeasier

Mods. 20/22/26 Mods. 40/45Mods. 20/22/26 Mods. 40/45

KJR-29B KJR-120C (Optional)(code CL 92 946)



DUCT INVERTER SPLIT GREAT CAPACITY MUCHR-H6A Series- Outdoor unit vertical discharge.- DC Inverter Compressor.- Accurate temperature control.- High static pressure.- Wall control with “Follow me”

function KJR-29B included.- Wall control with week schedule


TECHNICAL SPECIFICATIONSMODEL MUCHR-28-H6A MUCHR-40-H6A MUCHR-45-H6A MUCHR-56-H6A

Code CL 23 907 CL 23 909 CL 23 910 CL 23 911

Cooling (1)Capacity kW 27.50 39.32 44.23 54.40

Kcal/h 23,653 33,820 38,043 46,790Consumption kW 7.02 12.00 13.68 17.91EER kW 3.92 3.28 3.23 3.04

Heating (2)Capacity kW 28.24 40.63 45.15 57.48

Kcal/h 24,290 34,946 38,834 49,439Consumption kW 6.74 12.08 13.57 18.69COP kW 4.19 3.36 3.33 3.08

Indoorunit

MVD model- 280T1/DHN1-B D400T1/N1 D450T1/N1 D560T1/N1Code CL23383 CL23184 CL23185 CL23186Power supply F, V, Hz 1N-, 220-240V, 50HzMax. current A 6 12.5 12.5 15.5Air Flow (High / Medium / Low) m³/h 4820 / 4660 / 4620 7474 / 6072 / 4995 7474 / 6072 / 4995 9550 / 7950 / 6600Static pressure avail. (ESP) Pa 62 (40 – 200) 200 (50 – 280) 200 (50 – 280) 200 (50 – 280)Sound pressure (High / Medium / Low)(3) dB(A) 57 / 53 / 50 61 / 59 / 56 61 / 59 / 56 63 / 60 / 57Dimensions (W x H x D) mm 1443 x 470 x 810 1970 x 668 x 902.5 1970 x 668 x 902.5 1970 x 668 x 902.5Weight kg 108 232 232 232Drain connection mm Ø32 Ø32 Ø32 Ø32Power cable(5) mm² 2 x 2.5 + T 2 x 4 + T 2 x 4 + T 2 x 4 + T

OutdoorUnit

MVD model- V5X280W/V2GN1 V5X400W/V2GN1 V5X450W/V2GN1 V5X560W/V2GN1 Code CL23301 CL23303 CL23304 CL23306Power supply F, V, Hz 3N-, 400V, 50Hz 3N-, 400V, 50Hz 3N-, 400V, 50Hz 3N-, 400V, 50HzMax. current A 21.00 27.30 29.90 41.20Air flow rate m³/h 12,000 14,000 14,000 16,000Static pressure avail. (ESP) Pa 20 (0 - 40) 20 (0 - 40) 20 (0 - 40) 20 (0 - 40)Sound pressure(4) dB(A) 59 62 62 63Dimensions (W x H x D) mm 990 x 1635 x 790 1340 x 1635 x 790 1340 x 1635 x 790 1340 x 1635 x 790Weight kg 219 315 315 340Power cable(5) mm² 4 x 6 + T 4 x 10 + T 4 x 10 + T 4 x 16 + T

RefrigerantType R410A R410A R410A R410APreloaded amount kg 9.0 13.0 13.0 16.0Additional load (from 0 m) kg/m 0.057 0.110 0.110 0.170

Connection pipes

Liquid Line mm (inches) 9.52 (3/8") 12.7 (1/2") 12.7 (1/2") 15.9 (5/8")Gas Line mm (inches) 22.2 (7/8") 28.6 (1 1/8") 28.6 (1 1/8") 28.6 (1 1/8")

Pipe length (6) Max. Vertical m 110 110 110 110Total m 175 175 175 175


Remote control Model KJR-29B KJR-29B KJR-29B KJR-29BType Wiring Wiring Wiring Wiring

Temp. Range Operation

Cooling °C -5 to 48 -5 to 48 -5 to 48 -5 to 48Heating °C -20 to 24 -20 to 24 -20 to 24 -20 to 24

Notes: (1) Nominal cooling conditions: Indoor 27 °C DB, 19 °C WB and outdoor 35 °C DB, pipe length of 8 m and a height difference of 0 m. (2) Nominal cooling conditions: Indoor 20 °C DB, 15 °C WB and outdoor 7 °C DB, pipe length of 8 m and a height difference of 0 m. (3) Noise level measured in anechoic chamber at 1 m front distance and 1.4 m height. (4) Noise level measured in anechoic chamber at 1 m front distance and 1.3m height. (5) Power wiring recommended for L < 20 m, for longer distances it should be calculated. (6) Pipe length when outdoor unit is lower installed than the indoor units. Otherwise instead of 110m is 90m.Caution: - Before starting up the equipment (and without supply), you have to configure the whole micro-switch S6 in OFF position in the outdoor unit.

- Models 40, 45 and 56 do not include air filter.

Qualitymotor

Highprotection

HighPressure

Servicingeasier

Mod. 28 Mods. 40/45/56Mods. 28/40/45/56




DUCT INVERTER SPLITGREAT CAPACITY MUCHR-H7 Series- DC Inverter Compressor.- DC Fan Motors- Configurable static pressure- Remote ON / OFF signal and alarm.- Wall control with “Follow me” function

KJR-29B included.- Wall control with week schedule


TECHNICAL SPECIFICATIONSModel MUCHR-96-H7T

Code CL20259

Cooling (1)Nominal capacity kW 28.0Nominal rating W 9.0EER W/W 3.11

Heating (2)Nominal capacity kW 31.5Nominal rating W 8.5COP W/W 3.71

Indoor unit

Air flow rate (High / Medium / Low) m³/h 4,075 / 3,900 / 3,880

Static pressure Rated Pa 50Configurable (3) Pa 0 ~ 150

Sound pressure (High / Medium / Low) dB(A) 52 / 51 / 49Drain connection mm Ø 32Power supply V-Hz-Ph 220-240V~ 50Hz, 1PhInner power cable mm² 2 x 2.5 + TWired remote control KJR-29BProvided cable length (4 wires) m 6Dimensions (Width x Height x Depth) mm 1470 x 512 x 775Weight kg 83

Outdoor unit

Air flow (High) m³/h 9,800Sound pressure (High) dB(A) 59

Compressor (Brand / Model) MITSUBISHI / LNB53FCAMC

Power supply V-Hz-Ph 380-415V~ 50Hz, 3PhOutdoor power cable mm² 4 x 6 + TDimensions (Width x Height x Depth) mm 1120 x 1558 x 414Weight kg 148

Wholeset

Communication cable mm² 3 x 0.75(shielded)

Refrigerant

Type R410ALoad kg 7.2Preload until m 5Additional load(from 5 m) g/m 30

Design pressure MPa 4.4 / 2.6

Connection pipes


Ø 9,52 / Ø 25,1(3/8" / 1")

Max. Length(4) m 50

Max. Drop Height

Higher outdoor unit m 25

Lower outdoor unit m 30


Indoor (Cooling / Heating) °C 17 ~ 32 / 0 ~ 30Outdoor (Cooling / Heating) °C -15 ~ 46 / -15 ~ 24

Notes: (1) Nominal cooling conditions: ind. ut. 27 °C DB, 19 °C WB and outd. ut. 35 °C DB, 24 °C WB, for a pipe length of 7.5 m and a height difference of 0 m.

(2) Nominal heating conditions: ind. ut. 20 °C DB, 15 °C WB and outd. ut. 7 °C DB, 6 °C WB, for a pipe length of 7.5 m and a height difference of 0 m.

(3) Configurable pressure via Micro-switch ENC2 on the indoor PCB of the indoor unit. (4) Pipes minimum length of 2 m.- The above design and specifications are subject to change due product improvement without

prior notice.- The values of noise level match with values obtained in the anechoic chamber.



Different speeds of the external funAccurate adjustment of fan speed thanks to fan DC.

Configurable static pressureThe static pressure of the fan can be adjusted using the electronic board, in this way, the machine can be adapted to each installation.

Timer functionThe timer can be set to startand stop at any point in a 24-hour period.

Trouble shootingError codes are showed in the indoor panel, wall control and outer plate.


Remote signals (CP)The indoor unit has an ON/OFF input and an alarm output.

Cooling under low temperaturesOperation in cooling up to -15 °C outdoor temperature.

Follow me functionThe wireless remote control incorporates a temperature sensor.

Centralized control CCMPossibility to control several units from only one control. It can directly control up to 64 units of different systems (Air conditioners Inverter H6, H7, MVD and Fan coil units W7 series) (optional).



AIR CONDITIONER COLUMN TYPEMUCO-H6 Series

TECHNICAL SPECIFICATIONSModel MUCO-48-H6T MUCO-60-H6T

Code CL 20 390 CL 20 391

CoolingNominal capacity kW 12.31 15.00Nominal consumption (max.) kW 4,9 0 (6,40) 6.00 (7.00)EER W/W 2.51 2.50

HeatingNominal capacity kW 12.31 17.50Nominal consumption (max.) kW 4.40 (5.80) 5.85 (8.00)COP W/W 2.80 2.99

Indoor unit

Air flow rate (Super Hight/ High / Medium / Low) m³/h 1,950/1,900/1,700/1,530 2,000/1,900/1,700/1,530Sound pressure (Super High/ High / Medium / Low) dB(A) 55 / 53 / 49 / 45 52 / 50 / 46 / 44Sound power (Super High/ High / Medium / Low) dB(A) 65 / 63 / 59 / 55 62 / 60 / 56 / 54Auxiliary electrical resistance (1) Power kW 2.50 2.50Power supply (2) V-Hz-Ph 380-415V~ 50Hz, 3Ph 380-415V~ 50Hz, 3PhPower cable (2) mm² 4 x 2.5 + T 4 x 2.5 + TDimensions (Width x Height x Depth) mm 518 x 1870 x 395 518 x 1870 x 395Weight kg 58 61

Outdoor unit

Air flow (High) m³/h 3,600 3,600

FansType / Amount Axial / 1 Axial / 2Amount 1 2

Sound pressure (High) dB(A) 59 62.0 Sound power (High) dB(A) 69 72 Compressor (Brand / Model) SANYO / C-SBP160H38C SANYO / C-SBP185H38APower supply V-Hz-Ph 380-415V~ 50Hz, 3Ph 380-415V~ 50Hz, 3PhPower supply cable mm² 4 x 6 + T 4 x 6 + TDimensions (Width x Height x Depth) mm 1018 x 840 x 412 1032 x 1250 x 412Weight kg 90 114

Whole set

Communication cable (3) 5 wire cable (length) m Including (5 m) Including (5 m)4 wire cable (length) m Including (5 m) Including (5 m)

Refrigerant

Type R410A R410ALoad kg 3.1 4.3Preload until m 5 5Additional load (from 5 m) g/m 100 100

Connection pipesLiquid / Gas mm

(inches)Ø12.7 /

Ø19 (1/2" / 3/4")Ø12.7 /

Ø19 (1/2" / 3/4")Max. Length m 30 30Max. Drop Height m 20 20

Operation temperatureIndoor (Cool. / Heat.) °C 16 ~ 30 / 16 ~ 30 16 ~ 30 / 16 ~ 30Outdoor (Cool. / Heat.) °C 18 ~ 43 / -7 ~ 24 18 ~ 43 / -7 ~ 24

Notes: (1) For consumption data indicated it is not taken into account that auxiliary heater only works if manually activated. If the auxiliary heater is activated in heating mode, consumption will be higher than 2.5 kW.

(2) If indoor unit does not receive power supply through the outdoor unit. (3) If the power of the indoor unit is supplied through the outdoor unit, it will be necessary an additional cable 4 x 5 + T (not included).

- The above design and specifications are subject to change of product improvement without prior notice.- The values of noise level match with values obtained in the anechoic chamber.

Cold air protection In heating, the initial fan speedis adjusted in accordance with the coil temperature.


Auxiliary electrical resistanceThe auxiliary electrical resistance greatly improves the heat capacity.


Problem solvingError codes are displayed in the control panel.


YB1F2



WINDOW AIR CONDITIONERMUVR-C6 Series

ONLY COOLING- New refrigerant R32.- Rotative compressor

DC inverter.- Compact design.- Reduced consumption.- Easy to install.- 3 speed fan.- Timer function.- Digital display.

TECHNICAL SPECIFICATIONSMODEL MUVR-09-C6 MUVR-12-C6

Code CL20380 CL20381

Cooling

Nominal capacity kW 2.78 3.51Nominal consumption PEER kW 0.85 1.1Nominal intensity A 3.9 5.1Pdesignc kW 2.8 3.5EERd W/W 3.27 3.20SEER W/W 5.10 5.10Energy labeling A AElectricity Consumption kWh/year 195 237

Power consumption in thermostat-off mode W 15 15Standby power consumption W 1 1

Sound pressure levelIndoor Unit (High / Medium / Low) dB(A) 51.3 / 49.8 / 48.5 52.4 / 51.6 / 50.7Outdoor unit (High) dB(A) 60 58.5

LWA sound power levelInterior dB(A) 51.3 56Exterior dB(A) 64.3 64

Power supply V-Hz-Ph 220-240V~ 50Hz, 1Ph 220-240V~ 50Hz, 1PhMax. intensity A 6.58 7.36Max. consumption kW 1.29 1.43

Air flow rateIndoor ut. (High / Medium / Low) m³/h 448 / 391 / 332 420 / 366 / 310Outdoor ut. (High) m³/h 780 680

RefrigerantType R32 R32Amount kg 0.39 0.48GWP Global Warming Potential kg CO2 eq. 675 675

Design pressure MPa 1.7-4.8 1.7-4.8Dimensions (W x D x H) mm 560 x 400 x 670 560 x 400 x 670Weight kg 46.1 47.8Remote control model RG51 RG51

Operation OperationInterior °C 17 to 35 17 to 35Exterior °C 18 to 43 18 to 43


GasR32

MoreEcological

More efficiency

Less efficiency

ENERGYEFFICIENCYCLASS “A”

Easy-to-dismantle panel

Airrenovation

Movablechassis

Remote controlincluded

High airflow rate



AIR CONDITIONER UNITWITHOUT OUTDOOR UNITMU-WZ Series

- Energy efficiency Class A/C.- Easy to install: only two162 mm holes.- Air renovation.- Remote control and front display.- Outdoor grille of EPDM (patented).- MOD BUS connection for communication

(ideal for hotels).- Ultra compact design.- Backup resistance for low temperatures.- Floor installation (wall bottom).

TECHNICAL SPECIFICATIONS

MODEL MU-WZ32

Code CL 19 782Cooling capacity W 3,348Heating capacity W 3,762Electric resistance W 500Electric consumption (cooling - heating) W 1.287 - 1.214 (+500 electric resistance)EER (class) W/W 2.6 (A)COP (class) W/W 3.1 (A)Inner air flow m³/h 480Outdoor air flow m³/h 690Dehumidification l/h 1.3Inner sound pressure (High/Medium/Low) dB(A) 49 - 46.5 - 43.8Outdoor sound pressure (High/Medium/Low) dB(A) 59.6 - 41.6Operating temperature range °C -5 ~ 43Power supply V/Hz 230 - 50Dimensions (W x H x D) mm 1,000 x 580 x 250Weight kg 45Diameters of holes on the wall mm 162Refrigerant kg 0.68 (R410A)


Outdoor grille of EPDM (patented). Two Ø162 mm holes. Air renovation.

Anti-odor andanti-bacterial filters.

Safety boxfor remote control.

Built-incontrol panel



PORTABLE AIR CONDITIONERSMONOBLOC UNITMUPO Series C6/H6with outlet pipe to the outside

TECHNICAL SPECIFICATIONSMODEL MUPO-07-C6 MUPO-09-H6 MUPO-12-H6

Code CL20006 CL20007 CL20008

Cooling

Nominal capacity kW 2.05 2.6 3.5Nominal consumption PEER kW 0.78 0.995 1.34EERd W/W 2.63 2.61 2.62Energy labeling A A AElectricity Consumption kWh/h 0.78 0.995 1.315

Heating

Nominal capacity kW – 2.6 3.3Nominal consumption kW – 0.865 1.10

W/W – 3.00 3.00Energy labeling – A+ A+Electricity Consumption kWh/h – 0.865 1.125

Power consumption in thermostat-off mode W 43 54 70Standby power consumption W 0.21 0.259 0.34Sound power level dB(A) 62 62 62Power supply V-Hz-Ph 220-240V~ 50Hz, 1PhMax. current A 4.5 6 8

Air flow rateInterior m³/h 330 410 410Exterior m³/h 450 500 570

Diameter of air discharge hose mm 130 150 150

RefrigerantType R410A R410A R410AAmount kg 0.28 0.4 0.52GWP Global Warming Potential kg CO2 eq. 2088 2088 2088

Dimensions (W x D x H) mm 345 x 355 x 750 480 x 400 x 795 480 x 400 x 795Weight kg 23.5 30 33


Ventilation functionIt allows operation withonly ventilation.

ThermostatIt keeps automatically the set temperature.

Air discharge tube to the outsideEasy and quick to install, it allows the use of the air conditioner immediately.

DehumidificationMoisture reduction restoring an optimum temperature in wet areas.

Condensate removalRemoves condensate water so itis not necessary to connect the air conditioner to a drain.In dehumidification mode and invery humid environments, it is recommended to connect the equipment to a drain.In case of filling the condensate tank, “P1” code will appear on the screen.

Follow Me Function (iFEEL)The wireless remote control incorporates a temperature sensor.

MUPO-07-C6

Only

COLDWARM

PUMP

MUPO-09-H6MUPO-12-H6

Window kit included

Remote control INCLUDED.

Variable flowVariable flow



Variable flowOUTDOOR UNITSMini series MVD V4+Super DC Inverter (up to 45 kW)

WIDE RANGE CAPACITY

The new Mini Inverter MVD V4 + units offer a wide range of capacities, from 8 to 45 kW, which offer the possibility of connecting from 4 to 14 indoor units respectively.

Note: in outdoor units with a power of less than20 kW, when two or more units are connected,the maximum power of each indoor unit can not exceed 8 kW.

COMPRESSOR AND FAN MOTORS DC INVERTER

All range equipments include compressors and fan motors DC Inverter, in this way the performance for medium frequency system is improved and it ensures a more sensitive and effective control.

SIMPLIFIED COMMUNICATION CONNECTION

The installation of the communication wiring is simpler because in case you need to install a centralized control, it is not necessary to wire a second communication bus between the indoor units and the central control. You can connect the central control directly to the outdoor unit and perform manual routing for the control to detect all indoor units connected to that outdoor unit. Subsequently we can modify the addresses manually with the individual control of each equipment.

WIDE OPERATION RANGE

The V4+ equipment can operate in extreme temperature conditions, in heating mode up to an outdoor temperature of -15 °C and in cooling mode up to 46 °C.

AUTO ROUTING

The outdoor unit can assign address to the indoor units automatically. Wireless controls and wiring KJR-29B, can also configure, query and modify the addresses of the indoor units.

ModelMax.

quantity indoor unit.

80 4105 5120 6140 6160 7180 9200 10224 11260 12

400/450 14



EASY CONNECTION OF PIPES

It offers four possibilities for pipes and cables connection to satisfy the different needs of installation.

EASY INSTALLATION

The mini MVD can be transported by a forklift. Its small size greatly facilitates installation and effectively reduces the time and the necessary personnel.

EASY SERVICING

The forced cooling button causes the outdoor unit to operate in cooling mode in any state, so it is very easy to load refrigerant into the system when needed. The self-diagnosis function detects malfunctions at the main system locations and displays the type of error and its location. This allows more efficient servicing and maintenance operations.

SAVE OF SPACEThe mini MVD drives are more compact, which means a significant saving of space required for its installation. They are especially suitable for small offices, hotels, shops, etc.

DESIGN TO ENJOY OF LOW OPERATING SOUND DURING OPERATION

The optimal fan design and the new design of the outlet air grill and the baffle allow a higher air flow and a minor sound level during operation.

PIPE TOTAL LENGTH

Mini MVD V4+ system admits a maximum pipe length of 100 m (8 to 18 kW); 120m (20, 22 and 26 kW), 250 m (40 and 45 kW). With a height difference of 20 m or even 30 m in case the outdoor unit is installed lower than the indoor units.

SINGLE PHASE UNITS Maximal value (m)

PIPE LENGTH

Pipe total length 100

Max. distance (L)(Between outdoor ut.and farthest indoor ut.)

Total length 45 (80 and 105 models)60 (120 to 160 models)

Equivalent length 50 (80 and 105 models)70 (120 to 160 models)

Equivalent pipe length between the furthest indoor unitand the first distributor. 20

Equivalent pipe length between the indoor unitand the nearest distributor. 15

HIGHTDIFFERENCE

Height difference between indoor and outdoor units

Unit Higher outdoor unit 20

Unit Lower outdoor unit 30Height difference between indoor units 8

MINI SERIES MVD V4+

80 to 180 models

Models 200 to 260

Frontal view

Frontal view

Lateral right view

Lateral right view

Back view Bottom view

Air deflector

New grille

New fan

120m: Maximum equivalent length between the outdoor unit and the furthest indoor unit(at 40 and 45 kW); 70 m (12 to 26 kW), 50 m(8 and 10 kW).

30 m: Difference of maximum height between indoor and outdoor unit.

8 m: Height difference among indoor units.

Pipe



SIMPLIFIED COOLING INSTALLATION

It’s possible to realize the refrigerating installation through distributions boxes of 4 exits. It reduces the amount of weldings to perform.

- Flare connections (Outdoor unit side 3/8"-5/8" And indoor unit side 1/4 "-1/2"). Two adapter kits from 1/4" to 3/8" and two others from 1/2" to 5/8" are built-in the box.

- The distribution box doesn’t need power supply.However it has to be connected to the drain in order to remove the water.

Note: Only suitable with outdoor units Mini MVD from 8 to 26 kW.

MINI SERIES MVD V4+

Max. value Pipe

PIPELENGTH

Total pipe length/ vertical ≤100m L1+a+b+c+d

Maximum pipe length ≤45m L1+a, L1+b,L1+c, L1+d

Pipe length (from the distribution box to one indoor unit) ≤20m a, b, c, d

HIGHTDIFFERENCE

Height difference between indoor units and the outdoor unit

Outdoor unit upward ≤20m –

Lower outdoor unit ≤20m –

Height difference between indoor units ≤8m –

Hei

ght d

iffer

ence

bet

wee

nin

door

and

out

door

uni

ts

Hei

ght d

iffer

ence

amon

g in

door

uni

ts

Outdoor unit

Indoor unit

Box

Note: The maximum pluggable capacity to a box output is 7.1 kW. The distribution boxes can not be connected in series.

THREEPHASIC UNITS Maximal value (m)

PIPE LENGTH

Pipe total length 100 / 120 (for 20, 22.4 and 26 kW)250 (for 40 et 45 kW)

Maximum distance (L) (bt. outdoor and furthest indoor unit)

Total length 60 / 100 (for 40 and 45 kW)Equivalent length 70 / 120 (for 40 and 45 kW)

Equivalent pipe length between the furthest indoor unitand the first distributor. 20 / 40 (for 40 and 45 kW)

Equivalent pipe length between the indoor unit and the nearest distributor. 15

HIGHTDIFFERENCE



Unit Lower outdoor unit 30Height difference between indoor units 8

CL 23 283



TECHNICAL SPECIFICATIONS (SINGLEPHASIC UNITS)

Model MVD-V80W/DN1

MVD-V105W/DN1

MVD-V120W/DN1

MVD-V140W/DN1

MVD-V160W/DN1(B)

Code CL 23 260 CL 23 261 CL 23 262 CL 23 263 CL 23 264

Power supply F, V, Hz 1N-, 230V, 50Hz 1N-, 230V, 50Hz 1N-, 230V, 50Hz 1N-, 230V, 50Hz 1N-, 230V, 50Hz

Cooling (1)

Capacity kW 7.20 (1.5-8) 9.00 (2 - 10) 12.30 14.00 15.50

Power consumption kW 1.82 (0.71-1.80) 2.3 (0.89 - 2.59) 3.25 3.95 4.52

EER/SEER 3.95 / 5.10 3.91 / 5.30 3.78 / 7.10 3.54 / 6.68 3.43 / 6.42

Heating (2)

Capacity kW 7.2 (1.6-8.4) 9.0 (2.1 - 10) 13.20 15.40 17.00

Power consumption kW 1.76 (0.83-2.11) 2.27 (1.06-2.77) 3.47 4.16 4.77

COP/SCOP 4.09 / 3.80 3.97 / 3.80 3.80 / 4.11 3.70 / 3.96 3.56 / 3.83

Max. current A 18.50 22.80 24.40 29.80 30.00

ConnectivityConnecting capacity % 45 - 130 45 - 130 45 - 130 45 - 130 45 - 130

Max. quantity Unit Indoor 4 5 6 6 7

Compressor

Brand Mitsubishi Electric

Type DC Inverter - rotating

Amount 1 1 1 1 1

Model TNB220FLHMC TNB306FPGMC LNB42FSCMC

Fan

Type DC DC DC DC DC

Amount 1 1 2 2 2

Model WZDK170-38G-1 WZDK100-38G

Air flow rate m³/h 5,500 5,500 6,000 6,000 6,000

Sound pressure (3) dB(A) 56 57 57 57 57

DimensionsNet (W x H x D) mm 990 x 966 x 336 900 x 1327 x 320

Gross (W x H x D) mm 1120 x 1015 x 435 1030 x 1456 x 435

WeightNet kg 75.5 75.5 95.0 95.0 100.0

Gross kg 85.5 85.5 106.0 106.0 111.0

RefrigerantType R410A R410A R410A R410A R410A

Amount kg 2.95 2.95 3.3 3.9 3.9

Design pressureHigh Mpa 4.40 4.40 4.40 4.40 4.40

Low Mpa 2.60 2.60 2.60 2.60 2.60

Pipelength (4)

Max. Vertical m 20 20 20 20 20

Total m 100 100 100 100 100

Connectionpipes (5)

Liquid Line mm 9.52 (3/8") 9.52 (3/8") 9.52 (3/8") 9.52 (3/8") 9.52 (3/8")

Gas Line mm 15.9 (5/8") 15.9 (5/8") 15.9 (5/8") 15.9 (5/8") 19.1 (3/4")

Electricalconnections (6)

Power wiring / ICP mm²/A 2 x 6 + T / 25 2 x 6 + T / 30 2 x 10 + T / 35

Signal wiring mm² 3 x 0.75 (shielded)

Operation Temp. RangeOperation

Cooling °C -15 to 43 -15 to 43 -15 to 43 -15 to 43 -15 to 43

Heating °C -15 to 27 -15 to 27 -15 to 27 -15 to 27 -15 to 27

Notes:(1) Nominal cooling conditions: Indoor 27 °C DB, 19 °C WB and outdoor 35 °C DB, pipe length of 5 m and a height difference of 0 m.(2) Nominal cooling conditions: Indoor 20 °C DB, 15 °C WB and outdoor 7 °C DB, pipe length of 5 m and a height difference of 0 m.(3) Noise level measured in anechoic chamber at 1m front distance and 1 m height.(4) Pipe length when outdoor unit is higher installed than the indoor units. Otherwise the maximum distance in vertical can reach 30 m.(5) Specified diameters of connection pipes are of service valves, this does not mean that the pipe must have this diameter.(6) Power wiring recommended for L < 20 m, for longer distances it should be calculated.

MINI SERIES MVD V4+



SPECIFICATIONS (THREE-PHASE)

Model MVD-V120W/DRN1

MVD-V140W/DRN1

MVD-V160W/DRN1

MVD-V180W/DRN1

MVD-V200W/DRN1

MVD-V224W/DRN1

MVD-V260W/DRN1

Code CL 23 265 CL 23 266 CL 23 267 CL 23 268 CL 23 269 CL 23 270 CL 23 271

Power supply F, V, Hz 3N-, 400V, 50Hz

3N-, 400V, 50Hz

3N-, 400V, 50Hz

3N-, 400V, 50Hz

3N-, 400V, 50Hz

3N-, 400V, 50Hz

3N-, 400V, 50Hz

Cooling (1)

Capacity kW 12.30 14.00 15.50 17.50 20.00 22.40 26.00

Powerconsumption kW 3.25 3.95 4.52 5.30 6.10 6.80 7.60

EER/SEER 3.78/7.10 3.54/6.68 3.43/6.42 3.30/6.21 3.28/6.19 3.29/6.21 3.42/6.42

Heating (2)

Capacity kW 13.20 15.40 17.00 19.00 22.00 24.50 28.50

Power consumption kW 3.47 4.16 4.77 5.00 6.10 5.90 6.80

COP/SCOP 3.80/4.11 3.70/3.96 3.56/3.83 3.80/3.92 3.61/3.76 4.15/3.97 4.19/4.05

Max. current A 10.00 11.00 12.00 12.50 14.50 17.20 18.70

ConnectivityConnectingcapacity % 45 - 130 45 - 130 45 - 130 45 - 130 45 - 130 45 - 130 45 - 130

Max. quantity Unit Indoor 6 6 7 9 10 11 12

Compressor

Brand Mitsubishi Electric

Type DC Inverter - rotating

Amount 1 1 1 1 1 1 1

Model TNB306FPNMC LNB42FSAMC LNB53FCAMC

Fan

Type DC DC DC DC DC DC DC

Amount 2 2 2 2 2 2 2

Model WZDK100-38G

WZDK100-38G

WZDK100-38G

WZDK100-38G

WZDK170-38-G-1

WZDK170-38-G-1

WZDK170-38-G-1

Air flow rate m³/h 6,000 6,000 6,000 6,800 10,999 10,494 10,494

Sound pressure (3) dB(A) 57 57 57 59 59 59 60


Gross (W x H x D) mm 1030 x 1456 x 435 1270 x 1720 x 565

WeightNet kg 95.0 95.0 102.0 107.0 137.0 146.5 147.0

Gross kg 103.0 103.0 113.0 118.0 153.0 165.5 163.0

RefrigerantType R410A R410A R410A R410A R410A R410A R410A

Amount kg 3.3 3.9 3.9 4.5 4.8 6.2 6.2

Design pressureHigh Mpa 4.40 4.40 4.40 4.40 4.40 4.40 4.40

Low Mpa 2.60 2.60 2.60 2.60 2.60 2.60 2.60

Pipelength (4)

Max. Vertical m 20 20 20 20 20 20 20

Total m 100 100 100 100 120 120 120

Connectionpipes (5)

Liquid Line mm 9.52 (3/8")

Gas Line mm 15.9 (5/8") 19.1 (3/4") 22.2 (7/8")


Power wiring / ICP mm²/A 4 x 4 + T / 15 4 x 6 + T / 20

4 x 6 + T / 25

Signal wiring mm² 3 x 0.75(shielded)

Operation Temp.Range

Cooling °C -15 to 43 -15 to 43 -15 to 43 -15 to 43 -15 to 46 -15 to 46 -15 to 46

Heating °C -15 to 27 -15 to 27 -15 to 27 -15 to 27 -15 to 24 -15 to 24 -15 to 24

Notes:(1) Nominal cooling conditions: Indoor 27 °C DB, 19 °C WB and outdoor 35 °C DB, pipe length of 5 m and a height difference of 0 m.(2) Nominal cooling conditions: Indoor 20 °C DB, 15 °C WB and outdoor 7 °C DB, pipe length of 5 m and a height difference of 0 m.(3) Sound level measured in semi-anechoic chamber at 1 m distance front and 1.2 m high (1.3 m for models from 20 to 26 kW).(4) Pipe length when outdoor unit is higher installed than the indoor units. Otherwise the maximum distance in vertical can reach 30 m.(5) Specified diameters of connection pipes are of service valves, this does not mean that the pipe must have this diameter.(6) Power wiring recommended for L < 20 m, for longer distances it should be calculated.

MINI SERIES MVD V4+



SPECIFICATIONS (THREE-PHASE)

Model MVD-V400W/DRN1 MVD-V450W/DRN1

Code CL 23 272 CL 23 273

Power supply F, V, Hz 3N-, 400V, 50Hz 3N-, 400V, 50Hz

Cooling (1)

Capacity kW 40.00 45.00

Powerconsumption kW 11.90 13.60

EER/SEER 3.35/6.26 3.32/6.20

Heating (2)

Capacity kW 45.00 50.00

Powerconsumption kW 11.10 12.70

COP/SCOP 4.05/5.33 3.93/5.20

Max. current A 33.00 44.00

ConnectivityConnecting capacity % 45 - 130 45 - 130

Max. quantity Unit Indoor 14 14

Compressor

Brand Mitsubishi Electric Mitsubishi Electric

Type DC Inverter - rotating DC Inverter - rotating

Amount 2 2

Model LNB42FSAMC LNB53FCAMC

Fan

Type DC DC

Amount 2 2

Model WZDK560-38G(B) WZDK560-38G(B)

Air flow rate m³/h 16,575 16,575

Sound pressure (3) dB(A) 62 62


Gross (W x H x D) mm 1450 x 1785 x560 1550 x 1785 x560

WeightNet kg 240 275

Gross kg 260 290

RefrigerantType R410A R410A

Amount kg 9.0 12.0

Designpressure

High Mpa 4.40 4.40

Low Mpa 2.60 2.60

PipeLength (4)

Max. Vertical m 20 20

Total m 250 250

Connection pipes (5)

Liquid Line mm (inches) 12.7 (1/2") 12.7 (1/2")

Gas Line mm (inches) 22.2 (7/8") 25.4 (1")


Power wiring / ICP mm²/A 4 x 16 + T/ 40 4 x 16 + T / 50

Signal wiring mm² 3 x 0.75 (shielded) 3 x 0.75 (shielded)

Operation Temp. Range

Cooling °C -5 to 48 -5 to 48

Heating °C -15 to 24 -15 to 24

Notes:(1) Nominal cooling conditions: Indoor 27 °C DB, 19 °C WB and outdoor 35 °C DB, pipe length of 5 m and a height difference of 0 m.(2) Nominal cooling conditions: Indoor 20 °C DB, 15 °C WB and outdoor 7 °C DB, pipe length of 5 m and a height difference of 0 m.(3) Noise level measured in anechoic chamber at 1 m front distance and 1.2 m height.(4) Pipe length when outdoor unit is higher installed than the indoor units. Otherwise the maximum distance in vertical can reach 30 m.(5) Specified diameters of connection pipes are of service valves, this does not mean that the pipe must of this diameter.(6) Power wiring recommended for L < 20 m, for longer distances it should be calculated.

Caution: The 40 and 45 kW units of the Mini MVD V4 + range must be connected to at least 4 indoor units.

MINI SERIES MVD V4+



OUTDOOR UNITSMAXI MVD 2 PIPES V5X SERIESSuper DC Inverter (up to 246 kW)

RangePREMIUM



INNOVATIVE DESIGN

WIDE RANGE CAPACITY

The new modular Super DC Inverter Maxi MVD V5Xsystem consists of 8 basic modules that can be combined up to 4 of them as the customer wishes. They form a total system capacity that can go from 8 HP to 88 HP (246 kW) in 2HP increments.

In total you can connect up to 64 units. Always provided that its total capacity does not exceed 130% of the capacity of the outdoor unit.

MAX. EFFICIENCY WITH A SEER UNIT UP TO 8.25

Thanks to the new design of the heat exchanger with three rows, the exchange surface has increased up to 21%.

SUPER DC INVERTER TECHNOLOGY

All compressors and fan motors are DC Inverter, in this way performance is improved in medium frequencies and it ensure a more sensitive and effective control.

MAXI MVD 2 PIPES V5X SERIES

8 / 10 / 12HP 14 / 16 / 18 / 20 / 22 CV



AUTO ROUTING

The outdoor unit can assign address to the indoor units automatically.

Individual wireless controls and wiring KJR-29B, can also configure, query and modify the addresses of the indoor units.

PRECISE TEMPERATURE CONTROL.

Thanks to the advantages of MVD systems, maximum performance and comfort can be quickly achieved by shortening the heating and cooling times.

QUICK DEFROSTING

Time reduction technology of the defrost timeis added.

LOW SOUND LEVEL

The new optimized design of the fans allows to reduce the sound, in addition with the night mode it can be established a night period where the sound reductionis even greater.

ROTATION & BACKUP

In a modular system, thanks to the rotation function every unit can be started as master unit, therefore, all compressors will work the same amount of hours.

In the event of a problem and one of the modules showing an error code (E*), the “Backup” function resets the equipment with the problem and starts the next module of the rotation. For example, if there is a problem in slave unit 1, it will be put on hold and the other units will continue operation.

Master Slave 1 Slave 2

Sequence 1 1 2 3

Sequence 2 3 1 2

Sequence 3 2 3 1

TOTAL COMPATIBILITY

Compatible with all MVD indoor units.

PRIORITY AND MODE LOCK

The system allows blocking or prioritizing one mode of operation with regard to others. We can choose between:

- Heating mode priority (by default).

- Cooling mode priority.

- VIP priority, the indoor unit with address Nº 63 determines the mode of operation.

- Only heating

- Only cooling

CONFIGURABLE STATIC PRESSURE(UP TO 40 PA)

The available static fan pressure can be increased by simply activating a micro-switch on the control boardof the outdoor unit.


MasterSlave 1

Slave 2



SIMPLIFIED CONNECTION

The installation of the communication wiring is simpler because in case you need to install a centralized controller it is not necessary to wire a second communication bus between the indoor units and the central controller. The central controller can be connected directly to the outdoor unit.

EASY SERVICING

The forced cooling button causes the outdoor unit to operate in cooling mode in any state, so it is very easy to load refrigerant into the system when needed. The self-diagnosis function detects malfunctions and displays the type of error and its location. This allows more efficient servicing and maintenance operations.

NIGHT MODE

Possibility of establishing night schedules in which is possible to reduce the sound level. There are four different reduction levels.

PIPE TOTAL LENGTH

The Maxi MVD V5X system supports a maximum pipe length of 1000 m and a height difference of 90 m or even 110 m in case the outdoor unit is installed lower than the indoor units.

Max. value (m)

PIPE LENGTH

Pipe total length 1,000

Maxdistance (L)

Total length 175

Equivalent length 200

Equivalent pipe length between the furthest interior and the first distributor. 40 / 90*

HIGHTDIFFERENCE

Height difference between indoor and outdoor units.

Unit Higheroutdoor unit 90

Unit Lower outdoor unit 110

Height difference between indoor units 30

* When the length exceeds 40 m, it will be necessary to modify the diameters (refer to the installation manual).


Room temperature

Temperature

Operation Max.

Operation curve 8 h later 10 h of silent operation

Start 15 dB (A) less End

Mode Sound level

Normal mode According to normal operation

Silent mode 8 dB (A) Less

Super quiet mode 12 dB(A) less

Night mode (by default) 15 dB (A) less



SPECIFICATIONS

Model MVD-V5X252W/V2GN1

MVD-V5X280W/V2GN1

MVD-V5X335W/V2GN1

MVD-V5X400W/V2GN1

Code CL 23 300 CL 23 301 CL 23 302 CL 23 303

Power supply F, V, Hz 3N-,400V, 50Hz

Cooling (1)

Capacity kW 25.2 28 33.5 40

Power consumption kW 5.36 6.22 7.79 9.30

EER / SEER 4.70 / 8.25 4.50 / 7.9 4.30 / 7.54 4.30 / 7.54

Heating (2)

Capacity kW 27 31.5 37.5 45


COP / SCOP 5.6 / 6.52 5.3 / 6.35 4.9 / 6.13 4.8 / 6.03

Max. intensity A 20.0 21.0 23.0 27.3

ConnectivityPluggable capacity % 50 - 130 50 - 130 50 - 130 50 - 130

Max. quantity indoor ut. 13 16 20 23

Compressor

Brand Hitachi

Type DC Inverter

Amount 1 1 1 2

Model Nº 1 E655DHD-65D2YG E705DHD-72D2YG E405DHD-42D2YG

Model Nº 2 – – – E405DHD-42D2YG

Fan

Type DC

Amount 1 1 1 2

Air flow rate m³/h 12,000 12,000 12,000 14,000

Static pressureStandard Pa 0 - 20 0 - 20 0 - 20 0 - 20

Adjustable Pa 20 - 40 0 - 20 0 - 20 0 - 20

Sound pressure (3) dB(A) 58 59 60 62

Dimensions (W x H x D) mm 990x1635x790 990x1635x790 990x1635x790 1340x1635x790

Weight kg 219 219 237 297

RefrigerantType R410A

Amount kg 9 9 11 13

Pipe lengthMax. vertical

Outdoor ut. up (4) m 90

Outdoor ut. down m 110

Total m 1000

Connection pipes(5)

Liquid Line mm (inches) 12.7 (1/2") 12.7 (1/2") 15.9 (5/8") 15.9 (5/8")

Gas Line mm (inches) 25.4 (1") 25.4 (1") 28.6 (1 1/8") 31.8 (1 1/4")

Oil balance mm (inches) 8 (5/16")

Electrical connections (6)

Power wiring / ICP mm²/A 4 x 6 +T / 25 4 x 10 + T / 30

Signal wiring mm² 3 x 0.75 (Shielded)


Cooling °C -5 to 48

Heating °C -20 to 24

Notes:(1) Nominal cooling conditions: ind. ut. 27 °C DB, 19 °C WB and outd. ut. 35 °C DB, 24 °C WB, for a pipe length of 7.5 m and a height

difference of 0 m.(2) Nominal heating conditions: ind. ut. 20 °C DB, 15 °C WB and outd. ut. 7 °C DB, 6 °C WB, for a pipe length of 7.5 m and a height

difference of 0 m.(3) Noise level measured in semi-anechoic chamber at 1 m front distance and 1.3 m height.(4) In case of a height difference higher than 20 m it is recommended to install an oil trap every 10 m in the gas pipe.(5) Specified diameters of connection pipes are of service valves, this does not mean that the pipe must have this diameter.(6) Power wiring recommended for L < 20 m, for longer distances it should be calculated.




SPECIFICATIONS

Model MVD-V5X450W/V2GN1

MVD-V5X500W/V2GN1

MVD-V5X560W/V2GN1

MVD-V5X615W/V2GN1

Code CL 23 304 CL 23 305 CL 23 306 CL 23 307

Power supply F, V, Hz 3N-,400V, 50Hz

Cooling (1)

Capacity kW 45 50 56 61.5


EER / SEER 4.10 / 7.20 3.90 / 7.36 3.86 / 7.28 3.74 / 7.04

Heating (2)

Capacity kW 50 56 63 69


COP / SCOP 4.6 / 5.82 4.25 / 5.67 4.12 / 5.5 4.03 / 5.25

Max. intensity A 29.9 34.4 41.2 44.9

ConnectivityPluggable capacity % 50 - 130 50 - 130 50 - 130 50 - 130

Max. quantity indoor ut. 26 29 33 36

Compressor

Brand Hitachi

Type DC Inverter

Amount 2 2 2 2

Model Nº 1 E405DHD-42D2YG E405DHD-36D2YG E705DHD-72D2YG E705DHD-72D2YG

Model Nº 2 E405DHD-42D2YG E705DHD-72D2YG E705DHD-72D2YG E705DHD-72D2YG

Fan

Type DC

Amount 2 2 2 2

Air flow rate m³/h 14,000 16,000 16,000 16,000

Static pressureStandard Pa 0 - 20 0 - 20 0 - 20 0 - 20

Adjustable Pa 20 - 40 20 - 40 20 - 40 20 - 40

Sound pressure (3) dB(A) 62 63 63 63

Dimensions (W x H x D) mm 1340x1635x790 1340x1635x790 1340x1635x790 1340x1635x790

Weight kg 297 305 340 340

RefrigerantType R410A

Amount kg 13 16

Pipelength

Max. verticalOutdoor ut. up (4) m 90

Outdoor ut. down m 110

Total m 1000

Connection pipes (5)

Liquid Line mm (inches) 15.9 (5/8") 19.1 (3/4") 19.1 (3/4") 19.1 (3/4")

Gas Line mm (inches) 31.8 (1 1/4") 31.8 (1 1/4") 31.8 (1 1/4") 31.8 (1 1/4")

Oil balance mm (inches) 8 (5/16")

Electrical connections (6)

Power wiring / ICP mm² 4 x 10 + T / 35 4 x 16 + T / 40 4 x 16 + T / 50



Cooling °C -5 to 48

Heating °C -20 to 24

Notes:(1) Nominal cooling conditions: ind. ut. 27 °C DB, 19 °C WB and outd. ut. 35 °C DB, 24 °C WB, for a pipe length of 7.5 m and a height

difference of 0 m.(2) Nominal heating conditions: ind. ut. 20 °C DB, 15 °C WB and outd. ut. 7 °C DB, 6 °C WB, for a pipe length of 7.5 m and a height

difference of 0 m.(3) Noise level measured in semi-anechoic chamber at 1 m front distance and 1.3 m height.(4) In case of a height difference higher than 20 m it is recommended to install an oil trap every 10 m in the gas pipe.(5) Specified diameters of connection pipes are of service valves, this does not mean that the pipe must have this diameter.(6) Power wiring recommended for L < 20 m, for longer distances it should be calculated.




COMBINATIONS

Model Combinations(CV)

Capacity(CV)

Capacity (kW) Quantitymax. ind. unit.Cooling Heating

MVD-V5X252W/V2GN1 8 8 25.2 27 13

MVD-V5X280W/V2GN1 10 10 28 31.5 16

MVD-V5X335W/V2GN1 12 12 33.5 37.5 20

MVD-V5X400W/V2GN1 14 14 40 45 23

MVD-V5X450W/V2GN1 16 16 45 50 26

MVD-V5X500W/V2GN1 18 18 50 56 29

MVD-V5X560W/V2GN1 20 20 56 63 33

MVD-V5X615W/V2GN1 22 22 61.5 69 36

MVD-V5X670W/V2GN1 12 + 12 24 67 75 39

MVD-V5X730W/V2GN1 10 + 16 26 73 81.5 43

MVD-V5X780W/V2GN1 10 + 18 28 78 87.5 46

MVD-V5X840W/V2GN1 10 + 20 30 84 94.5 50

MVD-V5X895W/V2GN1 10 + 22 32 89.5 100.5 53

MVD-V5X950W/V2GN1 12 + 22 34 95 106.5 56

MVD-V5X1000W/V2GN1 18 + 18 36 100 112 59

MVD-V5X1065W/V2GN1 16 + 22 38 106.5 119 63

MVD-V5X1115W/V2GN1 18 + 22 40 111.5 125 64

MVD-V5X1175W/V2GN1 20 + 22 42 117.5 132 64

MVD-V5X1230W/V2GN1 22 + 22 44 123 138 64

MVD-V5X1285W/V2GN1 12 + 12 + 22 46 128.5 144 64

MVD-V5X1345W/V2GN1 10 + 16 +22 48 134.5 150.5 64

MVD-V5X1395W/V2GN1 10 + 18 + 22 50 139.5 156.5 64

MVD-V5X1455W/V2GN1 10 + 20 + 22 52 145.5 163.5 64

MVD-V5X1510W/V2GN1 10 + 22 + 22 54 151 169.5 64

MVD-V5X1565W/V2GN1 12 + 22 + 22 56 156.5 175.5 64

MVD-V5X1615W/V2GN1 18 + 18 + 22 58 161.5 181 64

MVD-V5X1680W/V2GN1 16 + 22 + 22 60 168 188 64

MVD-V5X1730W/V2GN1 18 + 22 + 22 62 173 194 64

MVD-V5X1790W/V2GN1 20 + 22 + 22 64 179 201 64

MVD-V5X1845W/V2GN1 22 + 22 + 22 66 184.5 207 64

MVD-V5X1900W/V2GN1 12 + 12 + 22 + 22 68 190 213 64

MVD-V5X1960W/V2GN1 10 + 16 + 22 + 22 70 196 219.5 64

MVD-V5X2010W/V2GN1 10 + 18 + 22 + 22 72 201 225.5 64

MVD-V5X2070W/V2GN1 10 + 20 + 22 + 22 74 207 232.5 64

MVD-V5X2125W/V2GN1 10 + 22 + 22 + 22 76 212.5 238.5 64

MVD-V5X2180W/V2GN1 12 + 22 + 22 + 22 78 218 244.5 64

MVD-V5X2230W/V2GN1 18 + 18 + 22 + 22 80 223 250 64

MVD-V5X2295W/V2GN1 16 + 22 + 22 + 22 82 229.5 257 64

MVD-V5X2345W/V2GN1 18 + 22 + 22 + 22 84 234.5 263 64

MVD-V5X2405W/V2GN1 20 + 22 + 22 + 22 86 240.5 270 64

MVD-V5X2460W/V2GN1 22 + 22 + 22 + 22 88 246 276 64

Capacities measured on the following conditions:

Cooling: Indoor: 27 °C DB, 19 °C WB / Outdoor: 35 °C DB.Heating: 20 °C DB, 15 °C WB / Outdoor 7 °C DB.Pipe: Length 7.5 m and height difference 0 m.

Note: In systems consisting of several modules, the power wiring and the electrical protections must be calculated for each module independently.




Cooling Heating Heating

OUTDOOR UNITSMaxi MVD 3 pipes VR4+ SeriesSuper DC Inverter (up to 180 kW)

HEAT RECOVERY SYSTEM

With the new MVD 3 tubes, we can heat and cool different zones simultaneously with a single air conditioning system.

This saves up to 50% of the energy cost compared to a conventional 2-pipes system.

WIDE WORKING TEMPERATURE RANGE

Thanks to the 5 basic modules (8, 10, 12, 14 and 16 HP), the system capacity can range from 8 HP to 64 HP with increments of 2 HP.

In total you can connect up to 64 indoor units or a total capacity of indoor units that does not exceed 130 % of the capacity of the outdoor unit.

SUPER DC INVERTER TECHNOLOGY

All range equipments include compressors and fan motors DC Inverter, in this way the performance for medium frequency system is improved and it ensures a more sensitive and effective control.

AUTOMATIC ADJUSTMENT OF CAPACITY

The heat exchanger is split into two parts, thus it canuse at the same time one part to evaporate and the other to condense, or it can use only one part if working with partial load.

WIDE WORKING TEMPERATURE RANGE

The VR4+ system can operate in extreme temperatures in heating mode up to an outside temperature of -20 °C

in cooling mode up to 48 °C and in both modes simultaneously from -5 °C to 24 °C.

2 Pipes

Consumption

3 Pipes

Con sump-tion equal to 0

Cooling Heating

Cooling

Simultaneous

Heating



SIMPLIFIED COMMUNICATION CONNECTION

The installation of the communication wiring is simpler because in case you need to install a centralized control is not necessary to wire a second bus for communication between the indoor units and the central control.

PIPE TOTAL LENGTH

The Maxi MVD VR4+ system supports a maximum length of pipe up to 1,000 m and a height difference of 70 m or even 110 m in case the outdoor unit is installed lower than indoor units.

DEFROSTS AND HEATING AT THE SAME TIME

Thanks to the heat exchanger split into two stages, the equipment is able to defrost while sending high pressure gas to the indoor units. First performs the defrosting of one exchanger section and then the other part.

You can connect the central control directly to the outdoor unit and perform manual routing for the control to detect all indoor units connected to that outdoor unit.

MAXI MVD 3 PIPES VR4 SERIES

Max. value (m)

PIPE LENGTH

Pipe total length 1000

Max. distance (L)Total length 175

Equivalent length 200

Equivalent pipe length between the furthest indoor unit and the first distributor. 40 / 90*

Equivalent pipe length between the furthest indoor unit and its distributor MS. 40

HEIGHTDIFFERENCE



Unit Lower outdoor unit 110

Height difference between indoor units 30

175 m: Maximum pipe distance between the outdoor and the interior unit which is farthest.

70 m: Maximum height difference between the indoor and outdoor unit.

30 m: Maximum height difference among indoor units.

Part 1 Part 1 Part 1

Part 2 Part 2 Part 2

Heating DefrostPart 1

DefrostPart 2

* When the length is greater than 40 m, it will be necessary to modify the diameters (refer to the installation manual).



ROTATION AND BACKUP FUNCTION

In a modular system, thanks to the rotation function every unit can be started as master unit, therefore, all compressors will work the same amount of hours.


Sequence 1 1 2 3

Sequence 2 3 1 2

Sequence 3 2 3 1

In the event of a problem and one of the modules showing an error code (E*), the “Backup” function resets the equipment with the problem and starts the next module of the rotation.

For example, if there is a problem in slave unit 1, it will be put on hold and the other units will continue operation.

In addition in the modules that have two compressors (14 / 16HP), in case of failure in one of them, the other will be automatically activated.





SLEEP MODE (NIGHT MODE)

Possibility of establishing night schedules in which is possible to reduce the sound level. There are four different levels of reduction, it is selected from the outer PCB.

EASY SERVICING

- Door-type electrical assembly to improve access to the refrigerating components.

- Location of the compressors near the outside.

- 4-bits display on the external PCB.

Mode Sound level

Normal mode According to normal operation

Silent mode 8 dB (A) Less

Super quiet mode 12 dB(A) less

Night mode (by default) 15 dB (A) less


Room temperature

Temperature

Operation Max.

Operation curve 8 h later 10 h of silent operation

Start 15 dB (A) less End

Component boxrotation

up to 150 °

Easy access tothe compressors



MS DISTRIBUTION BOXES

New MS distribution boxes for MVD VR4+ system (3 pipes), each box has 1 to 6 exits respectively. It permits to have a high flexibility at the time of installation.

Model MVD-MS01/N1-C MVD-MS02/N1-C MVD-MS04/N1-C MVD-MS06/N1-C

Code CL 23 284 CL 23 280 CL 23 281 CL 23 282Power supply F, V, Hz 1N-, 230V, 50Hz 1N-, 230V, 50Hz 1N-, 230V, 50Hz 1N-, 230V, 50HzMax. capacity of ind. units (outlet / total) kW 16/16 16/28 16/45 16/45Maximum amount indoor units (outlet / total) 4/4 4/8 4/16 4/24Outlets amount 1 2 4 6Dimensions (W x H x D) mm 630 x 225 x 600 630 x 225 x 600 960 x 225 x 600 960 x 225 x 600Weight kg 18 19.5 31 35Sound pressure dB(A) 33 33 33 40Drain connection mm Ø25 Ø25 Ø25 Ø25

Connectionpipes

Unit sideInterior

Liquid Line mm 9.5 (3/8") 9.5 (3/8") 9.5 (3/8") 9.5 (3/8")Gas Line mm 15.9 (5/8") 15.9 (5/8") 15.9 (5/8") 15.9 (5/8")

Unit sideExterior

Liquid Line mm 9.5 (3/8") 12.7 (1/2") 15.9 (5/8") 15.9 (5/8")High pressure gas Line mm 15.9 (5/8") 19.1 (3/4") 22.2 (7/8") 22.2 (7/8")Low pressure gas Line mm 19.1 (3/4") 25.4 (1") 31.8 (1 1/4") 31.8 (1 1/4")

Caution: These boxes can be used to connect high pressure duct indoor units (20 to 56W), look at the following table.

For high pressure duct indoor units (20 to 56W), the following boxes MS units are used:

Model MVD-MS02E/N1-C MVD-MS04E/N1-C

Code CL 23 285 CL 23 286Power supply F, V, Hz 1N-, 230V, 50Hz 1N-, 230V, 50HzMaximum indoor unit capacity kW 28 56Maximum amount of indoor units 1 1Dimensions (W x H x D) mm 630 x 225 x 600 960 x 225 x 600Weight kg 19.5 31Sound pressure dB(A) 33 33Drain connection mm Ø25 Ø25

Connectionpipes

Unit side Interior

Liquid Line mm 9.5 (3/8") 9.5 (3/8")Gas Line mm 15.9 (5/8") 15.9 (5/8")

Unit side Exterior

Liquid Line mm 12.7 (1/2") 15.9 (5/8")High pressure gas Line mm 19.1 (3/4") 22.2 (7/8")Low pressure gas Line mm 25.4 (1") 31.8 (1 1/4")

MVD-MS01/N1-C MVD-MS02/N1-C MVD-MS04/N1-C MVD-MS06/N1-C

Cooling

Cooling

Heating

Heating Heating Heating

3 Pipes

2 Pipes

2 Pipes




SPECIFICATIONS

Model MVD-252(8)W/D2RN1T(C)

MVD-280(10)W/D2RN1T(C)




Code CL 23 115 CL 23 116 CL 23 117 CL 23 118 CL 23 119

Power supply F, V, Hz 3N-, 400V, 50Hz

Cooling (1)

Capacity kW 25.2 28 33.5 40 45

Power consumption kW 5.73 6.67 8.07 11.30 13.24

EER / SEER 4.40 / 7.53 4.20 / 7.43 4.15 / 7.4 3.54 / 6.68 3.40 / 6.38

Heating (2)

Capacity kW 27 31.5 37.5 45 50

Power consumption kW 6.00 7.33 8.72 11.19 12.79

COP / SCOP 4.50 / 6.23 4.30 / 6.05 4.30 / 6.02 4.02 / 5.67 3.91 / 5.45

Max. current A 18.4 20.6 21.8 27.0 33.4

ConnectivityConnecting capacity % 50 – 130 50 – 130 50 – 130 50 – 130 50 – 130

Max. quantity Unit Indoor 13 16 20 23 26

Compressor

Brand Hitachi

Type DC Inverter

Amount 1 1 1 2 2

Model Nº 1 E655DHD-65D2YG

Model Nº 2 – – – E405DHD-36D2YG

Fan

Type DC DC DC DC DC

Amount 2 2 2 2 2

Air flow rate m³/h 12,000 12,000 13,000 15,000 15,000

Standard static pressure Pa 0 – 20 0 – 20 0 – 20 0 – 20 0 – 20

Sound pressure (3) dB(A) 57 57 58 60 60

DimensionsNet (W x H x D) mm 1250 x 1615 x 765

Gross (W x H x D) mm 1305 x 1790 x 820

WeightNet kg 255 255 255 303 303

Gross kg 273 273 273 322 322

RefrigerantType R410A R410A R410A R410A R410A

Amount kg 10 10 10 13 13

Additional oil Capacity (Type) l 5 (FVC68D) 5 (FVC68D) 5 (FVC68D) 7 (FVC68D) 7 (FVC68D)

Pipelength (4)

Max. vertical m 70 70 70 70 70

Total m 1,000 1,000 1,000 1,000 1,000

Connectionpipes (5)

Liquid Line mm 12.7 (1/2") 12.7 (1/2") 15.9 (5/8") 15.9 (5/8") 15.9 (5/8")

High pressure gas line mm 19.1 (3/4") 19.1 (3/4") 19.1 (3/4") 22.2 (7/8") 22.2 (7/8")

Low pressure gas line mm 22.2 (7/8") 22.2 (7/8") 25.4 (1") 28.6 (1 1/8") 28.6 (1 1/8")

Gas balance line mm 19.1 (3/4") 19.1 (3/4") 19.1 (3/4") 19.1 (3/4") 19.1 (3/4")

Oil balance line mm 6 (1/4") 6 (1/4") 6 (1/4") 6 (1/4") 6 (1/4")


Power wiring/ICP mm²/A 4 x 6 + T / 25 4 x 10 + T / 30 4 x 16 + T / 35



Cooling °C -5 to 48 -5 to 48 -5 to 48 -5 to 48 -5 to 48

Heating °C -20 to 24 -20 to 24 -20 to 24 -20 to 24 -20 to 24

Simultaneous °C -5 to 24 -5 to 24 -5 to 24 -5 to 24 -5 to 24

Notes:(1) Nominal cooling conditions: indoor 27 °C DB, 19 °C WB and outdoor 35 °C DB, pipe length of 7.5 m and a height difference of 0 m.(2) Nominal cooling conditions: indoor 20 °C DB, 15 °C WB and outdoor 7 °C DB, pipe length of 7.5 m and a height difference of 0 m.(3) Noise level measured in anechoic chamber at 1 m front distance and 1.3 m height.(4) Pipe length when outdoor unit is higher installed than the indoor units. Otherwise the maximum distance in vertical can reach 110 m.(5) Specified diameters of connection pipes are of service valves, this does not mean that the pipe must have this diameter. Gas and

oil balance pipe, is only needed when two or more modules are connected.(6) Power wiring recommended for L < 20 m, for longer distances it should be calculated.




COMBINATIONS

Model Combination(CV)

Capacity(CV)

Capacity (kW) Max. quantityindoor. ut.Cooling Heating

MVD-252(8)W/2RN1T(C) 8 8 25.2 27 13

MVD-280(10)W/2RN1T(C) 10 10 28 31.5 16

MVD-335(12)W/2RN1T(C) 12 12 33.5 37.5 20

MVD-400(14)W/2RN1T(C) 14 14 40 45 23

MVD-450(16)W/2RN1T(C) 16 16 45 50 26

MVD-532(18)W/2RN1T(C) 8+10 18 53.2 58.5 29

MVD-560(20)W/2RN1T(C) 10+10 20 56 63 33

MVD-615(22)W/2RN1T(C) 10+12 22 61.5 69 36

MVD-680(24)W/2RN1T(C) 10+14 24 68 76.5 39

MVD-730(26)W/2RN1T(C) 10+16 26 73 81.5 43

MVD-800(28)W/2RN1T(C) 14+14 28 80 90 46

MVD-850(30)W/2RN1T(C) 14+16 30 85 95 50

MVD-900(32)W/2RN1T(C) 16+16 32 90 100 53

MVD-960(34)W/2RN1T(C) 10+10+14 34 96 108 56

MVD-1010(36)W/2RN1T(C) 10+10+16 36 101 113 59

MVD-1065(38)W/2RN1T(C) 10+12+16 38 106.5 119 64

MVD-1130(40)W/2RN1T(C) 10+14+16 40 113 126.5 64

MVD-1200(42)W/2RN1T(C) 14+14+14 42 120 135 64

MVD-1250(44)W/2RN1T(C) 14+14+16 44 125 140 64

MVD-1300(46)W/2RN1T(C) 14+16+16 46 130 145 64

MVD-1350(48)W/2RN1T(C) 16+16+16 48 135 150 64

MVD-1432(50)W/2RN1T(C) 8+10+16+16 50 143.2 158.5 64

MVD-1460(52)W/2RN1T(C) 10+10+16+16 52 146 163 64

MVD-1515(54)W/2RN1T(C) 10+12+16+16 54 151.5 169 64

MVD-1580(56)W/2RN1T(C) 10+14+16+16 56 158 176.5 64

MVD-1650(52)W/2RN1T(C) 14+14+14+16 58 165 185 64

MVD-1700(60)W/2RN1T(C) 14+14+16+16 60 170 190 64

MVD-1750(62)W/2RN1T(C) 14+16+16+16 62 175 195 64

MVD-1800(64)W/2RN1T(C) 16+16+16+16 64 180 200 64

Capacities measured on the following conditions:

Cooling: Indoor: 27 °C DB, 19 °C WB / Outdoor: 35 °C DB.Heating: 20 °C DB, 15 °C WB / Outdoor 7 °C DB.Pipe: Length 7.5 m and height difference 0 m.

Note: In systems consisting of several modules, the power wiring and the electrical protections must be calculated for each module independently.




MVD DISTRIBUTORSCode Model Description

INDOOR UNIT DISTRIBUTORS (FOR ALL SYSTEMS)

TF 03 611 FQZHN-01D TO < 23

TF 03 612 FQZHN-02D 23 ≤ TO < 46

TF 03 613 FQZHN-03D 46 ≤ TO < 92

TF 03 614 FQZHN-04D 92 ≤ TO < 135

TF 03 615 FQZHN-05D 135 ≤ TO < 180

TF 03 616 FQZHN-06D 180 ≤ TO

INTERVALS DISTRIBUTORS VR4+ (3 PIPES)

TF 03 636 FQZHN-01SB TO < 16.6

TF 03 637 FQZHN-02SB 16.6 ≤ TO < 33

TF 03 638 FQZHN-03SB 33 ≤ TO < 66

TF 03 639 FQZHN-04SB 66 ≤ TO < 92

TF 03 640 FQZHN-05SB 92 ≤ TO

DISTRIBUTORS OUTDOOR V5X+ (2 PIPES)

TF 03 641 FQZHW-02N1D Connection 2 Outdoor units



DISTRIBUTORS OUTDOOR VR4+ (3 PIPES)

TF 03 644 FQZHW-02SB Connection 2 Outdoor units



Note:A = Total Capacity (kW) of indoor units connected from that distributor.

FQZHN-D(Liquid+Gas)

FQZHN-SB(Liquid+High Gas+ Low Gas)

FQZHW-N1D(Liquid+Gas)

FQZHW-SB(Liquid + High Gas

+ Low gas)

Hydronic RangeHydronic Range



Hydronic Range

WALL FANCOIL MUP-W7 Series

- 2 Pipes Fan Coil Unit Wall Type- 3 way valves with bypass included.- Low noise and low-energy consumption

DC fan motor.- Automatic blade swinging.- Digital display.- Remote signal ON / OFF.- Wireless remote control included.- Wall control with “Follow me” function

KJR-29B (optional).- Centralized controller CCM (optional).

TECHNICAL SPECIFICATIONSModel MUP-07-W7 MUP-09-W7 MUP-12-W7 MUP-18-W7

Code CL 04 315 CL 04 316 CL04317 CL 04 318

CoolingCapacity (High / Medium / Low)(1) kW 2.37 / 2.2 / 1.97 2.86 / 2.48 / 2.06 3.27 / 2.90 / 2.66 4.45 / 3.95 / 3.21Water flow m³/h 0.378 0.454 0.562 0.765Water pressure drop kPa 23.1 33.6 42 36.3

Heating50 °C

Capacity (High / Medium / Low) (2) kW 3.15 / 2.85 / 2.35 3.54 / 2.92 / 2.49 4.29 / 3.77 / 3.35 5.90 / 5.17 / 4.18Water pressure drop kPa 22 31.4 40 32.8

70 °CCapacity (High / Medium / Low) (3) kW 4.91 / 4.45 / 3.85 5.52 / 4.56 / 4.08 6.69 / 5.88 / 5.49 9.20 / 8.07 / 6.86Water pressure drop kPa 27.5 34.4 41.9 35.1

Air flow rate (High / Medium / Low) m³/h 436 / 410 / 320 523 / 427 / 349 650 / 550 / 504 950 / 820 / 670Exchanger water volume l 0.220 0.220 0.220 0.271Power supply V/F/ Hz 220-240 / 1 / 50 220-240 / 1 / 50 220-240 / 1 / 50 220-240 / 1 / 50Consumption (High / Medium / Low) (4) W 11 /10 / 9 14 / 11 / 9 22 / 16 / 14 32 / 22 / 15Sound pressure (High / Medium / Low) (5) dB(A) 34 / 31 / 28 35 / 30 / 27 41.5 / 37.2 / 35.2 45 / 40.7 / 35.9Max. working pressure MPa 1.6 1.6 1.6 1.6Water connections inch. 3/4" 3/4" 3/4" 3/4"Drain connection mm Ø20 Ø20 Ø20 Ø20Dimensions (Width x Height x Depth) mm 915×210×290 915×210×290 915×210× 290 1070×210×316Weight kg 12 12 12 14.7

Notes:(1) Cooling capacity for each of the three air flow rates and according to the conditions: Water inlet/outlet temp. 7/12 °C Outdoor

temp. 27 °C DB, 19 °C WB.(2) Heating capacity for each of the three air flow rates and according to the conditions: Water inlet/outlet temp. 50/40 °C Outdoor

temp. 20 °C.(3) Heating capacity for each of the three air flow rates and according to the conditions: Water inlet/outlet temp. 70/60 °C Outdoor

temp. 20 °C.(4) Consumption for each of the three air flow rates.(5) Sound pressure level measured in semi-anechoic chamber.

- The above design and specifications are subject to change of product improvement without prior notice.

Remote control included

Wired control(optional CL92869)

Centralized controller CCM (Optional CL92871)


Timer functionThe timer can be set to start and stop at any point in a24-hour period.

Remote signal The device has an external ON/OFF input.

Centralized controller CCMPossibility to control several units from only one control.It can directly control up to 64 units of different systems(Air conditioners Inverter H6, H7, MVD and fan coil unitsW7 series) (optional).

NEW



FAN COIL CASSETTEMUCSW-HG Series

- 2 Pipes Fan Coil Unit Cassette Type.- Extremely quiet.- Side air discharge.- Minimum consumption.- Condensate removal pump.- Wireless remote control.- Centrifugal fan.- Exterior air flow- Fresh air intake function.- Possibility of master / slave connection.

Turning on one unit, all units are turned on.- Wireless remote control included.- 3 way valves with bypass

(optional CO05506 + CO05509).


Model MUCSW-18-HG MUCSW-21-HG MUCSW-42-HG MUCSW-48-HG

Code CL 04 405 CL 04 406 CL 04 410 CL 04 411

Coolingcapacity

Total W 5100 6100 11500 13500

Sensible W 3600 4300 8100 9500

Heating capacity W 5300 6300 12600 14700

Absorbed power W 76 90 189 220

Air flow rate m³/h 850 1020 2040 2380

Sound level (max.) dB(A) 44 45 51 53

Water flow l/h 877 1049 1978 2322

Battery charge loss kPa 16 18 19 20

Pipes (inlet / outlet) inch. 3/4" 3/4" 3/4" 3/4"

Dimensions (L x W x H) mm 701x701x290 701x701x290 811x811x290 811x811x290

Weight kg 29.5 29.5 37 37

*Power supply: 220V-240V/1/50Hz.Nominal capacity COLD: Bulb temperature 27 °C. Wet Bulb Temperature: 19.5 °C.

Cable control(optional CL 92 984)

Remote control(included)

Air inletrenovation

Side air discharge

Protection grille on the fan to avoid objects entry.

Water inlets and outlets. Easy maintenance.The fan and motor can be removed from the panel.

Pre-marking of holes for renovation and air delivery.



FAN COIL CASSETTE MUCS-W7 Series.

- 2 Pipes Fan Coil Unit Cassette Type.- Design 360°- Models 14 and 16 of compact size.- Low noise and low-energy consumption

DC fan motor.- Condensate removal pump.- Fresh air intake function.- Ducted outlet for exhaust air in adjacent room.- Remote ON / OFF signal (optional).- Wireless remote control included.- Wall control with “Follow me” function

KJR-29B (optional).- CCM Centralized Control

(optional on 14/16/20 models).

TECHNICAL SPECIFICATIONSModel MUCS-14-W7 MUCS-16-W7 MUCS-20-W7 MUCS-24-W7 MUCS-36-W7

Code CL 04 415 CL 04 416 CL 04 417 CL 04 418 CL 04 419

CoolingCapacity (High / Medium / Low) (1) kW 3.93/3.07/2.48 4.24/3.31/2.67 5.77/4.5/3.63 7.00/5.32/4.34 10.64/8.09/6.60Water flow m³/h 0.676 0.729 0.992 1.204 1.830Water pressure drop kPa 12 9.4 28.0 23.0 36.0

Heating50 °C

Capacity (High / Medium / Low) (2) kW 5.34/4.00/3.15 5.77/4.33/3.4 7.85/6.12/4.65 9.52/7.43/5.55 14.47/11.29/8.44Water pressure drop kPa 10.6 9.4 26.0 20.0 34.0

70 °CCapacity (High / Medium / Low) (3) kW 8.34/6.26/5.16 9.00/6.76/5.56 12.24/9.55/7.68 14.85/11.58/9.17 22.57/17.6/13.93Water pressure drop kPa 11.9 10.5 28.4 23.3 36.5

Air flow rate (High / Medium / Low) m³/h 717/502/359 785/550/393 1,255/879/628 1,596/1,117/798 1,850/1,295/925Exchanger water volume L 0.306 0.306 0.677 1.015 1.015Power supply V/F/Hz 220-240/1/50 220-240/1/50 220-240/1/50 220-240/1/50 220-240/1/50Consumption W 27 32 50 90 124Sound pressure (High / Medium / Low) (4) dB(A) 44.8/36.2/28.8 46.6/37.9/30.3 44.9/36.8/28.2 48.8/39.7/34.3 50.5/41.9/34.2Max. working pressure MPa 1.6 1.6 1.6 1.6 1.6Fresh air inlet mm Ø65 Ø65 Ø75 Ø75 Ø75Water connections inch. 3/4" 3/4" 3/4" 3/4" 3/4"Drain connection mm Ø25 Ø25 Ø32 Ø32 Ø32

DimensionsBody (Width x Height x Depth) mm 575x261x575 575x261x575 840x230x840 840x300x840 840x300x840Cover (Width x Height x Depth) mm 647x50x 647 647x50x647 950x45x950 950x45x950 950x45x950

Weight kg 19 19 29 33 35.5

Notes:(1) Cooling capacity for each of the three air flow rates and according to the conditions: Water inlet/outlet water temperature 7/12 °C; Ambient temp. 27 °C DB,

19 °C WB.(2) Heating capacity for each of the three air flow rates, the same water flow than in cooling and according to the conditions: Water inlet/outlet water temperature

50/40 °C; Ambient temperature 20 °C.(3) Heating capacity for each of the three air flow rates, the same water flow than in cooling and according to the conditions: Water inlet/outlet water temperature

70/60 °C; Ambient temperature 20 °C.(4) Sound pressure level measured in semi-anechoic chamber.- Design and specifications are subject to change in order to product improvement without prior notice.


Wired control(optional)

Centralized controller CCM (Optional 14/16/20 models)

Design 360°Thanks to the 360° panel design, the air is more evenly distributed.



Remote signal The device has an external ON/OFF input.

Centralized controller CCMPossibility to control several units from only one control. It can directly control up to 64 units of different systems (Air conditioners Inverter H6, H7, MVD and Fan coil units W7 series) (optional in models 14/16/20).

OPTIONALS– 3 way valves with bypass included

(CO05506 + CO05509).

– Wired wall control (CL92869)

– Centralized controller CCM (CL92871).

– Connector for external ON / OFF:• MUCS-14/16-W7 (CL94831)• MUCS-20/24/36-W7 (CL94832)

NEW



UNIVERSAL FAN COIL UNIT HORIZONTAL AND VERTICALMUC-CE4 (with casing)

FEATURES

MULTIPLE FUNCTIONS

1. The connection layout can be modified. If a pipe connection is available on the left side and the customer wishes the connection to the right, the battery can be removed from the unit and modified as shown in figure (A).

2. The bitubular units can be transformed into four pipes pipes units. If you have a bitubular unit, install an additional hot water battery to convert the unit to four tubes, as shown in figure (B).

3. Remove the box (4 upper screws and 2 lower screws). The unit will be exposed as in figure (A).

MUC-SE4 (without casing)

OPTIONALS

1. 3 way valves with bypass included (CO05506 + CO05509).

2. Additional heating battery (for water), to be installed inside the equipment (LC04522 to LC04528).

3. Set of feet for equipment with casing MUC-CE4 (LC04530).

4. Horizontal / vertical installation drain tray (LC04529).

5. Control kit for fan coil unit includes wall wired control, temperature sensors (see page 287).- 2 pipes system (LC04531).- 4 pipes system (LC04532).

Figure A Figure B



SERIE CE4 / SE4 7 11 16 25 32 38 44

Code with casing CL 04 561 CL 04 562 CL 04 564 – CL 04 567 CL 04 568 –

Code without casing – CL 04 552 – CL 04 556 CL 04 557 CL 04 558 CL 04 559

Nominalair flow

H

m³/h

340 510 850 1360 1700 2040 2380

M 270 400 670 1080 1360 1630 1900

l 200 300 510 810 1000 1220 1430

Coolingcapacity

H

kW

1.95 2.83 4.55 7.2 9 10.8 12.6

M 1.7 2.4 4.0 6.3 7.6 9.0 11.0

l 1.4 1.9 3.3 5.1 6.2 7.3 8.9

Sensitive cooling capacity

H

kW

1.5 2.0 3.1 4.9 6.2 7.5 8.5

M 1.4 1.9 2.8 4.4 5.4 6.6 7.9

l 1.2 1.7 2.5 3.8 4.7 5.5 6.6

Heatingcapacity

H

kW

3.2 4.3 7.5 12.8 15.1 17.8 20.0

M 2.7 3.8 6.1 10.1 12.0 14.2 17.6

l 2.1 2.9 4.7 7.7 9.1 10.8 13.4

Water flow l/m 5.6 8.1 13.0 20.6 25.8 31.0 36.1

Sound level dB(A) 37 39 43 46 48 50 52

Voltage 1N-220V-50Hz

Input power W 37 52 76 134 152 189 228

Hydraulic pressure loss kPa 8 17 37 30 36 47 65

Drainage pipe mm 20

ConnectionInlet inch. 3/4"

Output inch. 3/4"

WeightNet kg 35.7 38.8 42.7 53.8 60.9 64.8 68.7

Gross kg 37.3 40.5 44.7 56.2 63.7 67.8 72.0

Remarks:

1. Cooling capacity with air inlet temperature by 27 °C DB/ 19.5 WB, cold water inlet by 7 °C and temperature differenceof 7 °C.

2. Heating capacity with inlet air temperature of 21 °C DB, water inlet at 60 °C.

3. Sound level measured at <17 dB (A).

UNIVERSAL FAN COIL UNIT HORIZONTAL AND VERTICAL



Series with casing

DIMENSIONS MUC-CE4 (mm)

Model Length(A)

Width(B)

Height(C)

Grille(L)

MUC-07-CE4 920 230 630 604

MUC-11-CE4 1,020 230 630 704

MUC-16-CE4 1,220 230 630 904

MUC-32-CE4 1,820 230 630 1,504

MUC-38-CE4 2,020 230 630 1,704

FLOOR OR WALL INSTALLATION

Series without casing

DIMENSIONS MUC-SE4 (mm)

Model Length(A)

Width(B)

Height(C)

Grille(L)

Grille(w)

MUC-11-SE4 719 220 508 675 125

MUC-25-SE4 1,219 220 508 1,175 125

MUC-32-SE4 1,519 220 508 1,475 125

MUC-38-SE4 1,719 220 508 1,675 125

MUC-44-SE4 1,719 220 508 1,675 125

INSTALLATION IN THE CEILING (SUSPENSION)




UNIVERSAL FAN COIL UNIT HORIZONTAL AND VERTICALMUC-W7/SE Series

FEATURES– Universal 2 pipes Fan Coil Unit

– Floor or ceiling installation (vertical / horizontal)

– Low noise and low-energy consumption DC fan motor.

– Manually adjustable blades (Version CE)

– Front air inlet (Version CE)

– Without the need of using supporting feet (Version CE)

– Includes condensate collecting tray in L-form for the valve.

DIMENSIONS

MUC-W7/SE Series

Model 7 11 16 19 24

A (mm) 550 750 950 1250

B (mm) 526 726 926 1226

C (mm) 500 700 900 1200

D (mm) 532 732 932 1232

MUC-W7/CE Series

OPTIONALS– 3 way valves with bypass included (CO05506 + CO05509).

– Control kit for fan coil unit includes wall wired control, temperature sensors, connection to the centralized control CCM and ModBus (LC04531).

– Centralized controller CCM* (CL92871).

* For connection it is necessary the fan coil unit control kit (LC04531).

MUC-W7/CE Series

Model 7 11 16 19 24

A (mm) 800 1000 1200 1500

B (mm) 584 784 984 1284

C (mm) 500 700 900 1200

D (mm) 526 726 926 1226

NEW




ModelWithout casing (Version SE) MUC-07-W7/SE MUC-11-W7/SE MUC-16-W7/SE MUC-19-W7/SE MUC-24-W7/SE

With casing (Version CE) MUC-07-W7/CE MUC-11-W7/CE MUC-16-W7/CE MUC-19-W7/CE MUC-24-W7/CE

CodeWithout casing (Version SE) CL 04 580 CL 04 581 CL 04 582 CL 04 583 CL 04 584

With casing (Version CE) CL 04 590 CL 04 591 CL 04 592 CL 04 593 CL 04 594

Cooling

Capacity(High / Medium / Low)(1) kW 1.87 / 1.50 / 1.20 3.27 / 2.60 / 1.86 3.97 / 2.88 / 2.61 5.64 / 4.01 / 3.06 7.85 / 6.08 / 4.92

Water flow m³/h 0.321 0.562 0.693 0.970 1.135

Water pressure drop kPa 9.60 19.30 30.10 16.60 31.40

Heating

50 °C

Capacity (High / Medium / Low)(2) kW 2.53 / 1.91 / 1.47 4.58 / 3.49 / 2.47 5.64 / 4.03 / 3.04 8.23 / 6.01 / 4.54 11.69 / 8.72 / 6.97


60 °CCapacity (High)(3) kW 3.31 6.06 7.48 10.97 15.62


Air flow rate (High / Medium / Low) m³/h 425 / 360 / 320 680 / 580 / 510 765 / 650 / 570 1.020 / 870 / 765 1.530 / 1.300 / 1.150

Staticpressure

Version SE Pa 12 12 12 12 12

Version CE Pa 0 0 0 0 0

Exchanger water volume L 0.195 0.259 0.344 0.471 0.471

Power supply V / Ph / Hz 220-240 / 1 / 50 220-240 / 1 / 50 220-240 / 1 / 50 220-240 / 1 / 50 220-240 / 1 / 50

Consumption W 16 33 29 39 119

Soundpressure (4)

Version SE (High / Medium / Low) dB(A) 30 / 26 / 20 34 / 30 / 24 36 / 32 / 26 40 / 34 / 28 43 / 37 / 31

Version CE (High / Medium / Low) dB(A) 31 / 27 / 21 35 / 31 / 25 37 / 33 / 27 41 / 35 / 29 44 / 38 / 32

Operation maximum pressure MPa 1.6 1.6 1.6 1.6 1.6

Inlet water maximum temperature °C 65 65 65 65 65

Water connections inch 3/4" 3/4" 3/4" 3/4" 3/4"

Drain connection mm Ø 16 Ø 16 Ø 16 Ø 16 Ø 16

Dimensions

Version SE (Widthx Height x Depth) mm 550 x 545 x 212 750 x 545 x 212 950 x 545 x 212 1,250 x 545 x 212 1,250 x 545 x 212

Version CE (Widthx Height x Depth) mm 800 x 592 x 220 1,000 x 592 x 212 1,200 x 592 x 220 1,500 x 592 x 220 1,500 x 592 x 220

WeightVersion SE kg 19 23.5 27 34 34

Version CE kg 24.4 34.2 34.2 40 40

Notes:(1) Cooling capacity for each of the three air flow rates and according to the conditions: Water inlet/outlet water temperature 7/12 °C;

Ambient temp. 27 °C DB, 19 °C WB.(2) Heating capacity for each of the three air flow rates and according to the conditions: Water inlet/outlet water temperature 50/40 °C;

Ambient temperature 20 °C.(3) Heating capacity for the high air flow rate, the same water flow rate as in cooling and according to conditions: Water inlet/outlet

water temperature 60/50 °C; Ambient temperature 20 °C.(4) Sound pressure level measured in semi-anechoic chamber.

- The above design and specifications are subject to change of product improvement without prior notice.




MUC-HP4 Series

FEATURES

EVAPORATING COIL

The heat exchanger has been designed using special software and factory testing to ensure high performance. It has a reverse flow design which increases its efficiency.

Made of copper tube without weldings and high efficiency aluminum fins.

FILTER

It has a 3-5 mm of thickness filter built-in with aluminum bracket. For larger models, the filter will consist of two sections to increase resistance. The filter is removable at the button to easy cleaning and maintenance.

CONDENSATE COLLECTING TRAY

The condensate tray is made of steel and located on the bottom plate. It has an insulation of 5 mm thickness. The double insulation guarantees the absence of condensates.

OPTIONALS

1. 3 way valves with bypass (CO05506 + CO05509).

2. Module with additional heating battery (water), to install in the drive of the equipment (LC04571 to LC04577).

3. Control kit for fan coil unit includes wall wired control, temperature sensors (see page 287).- 2 pipes system (LC04531).- 4 pipes system (LC04532).

HIGH PRESSURE DUCT




Model MUC-12-HP4 MUC-16-HP4 MUC-25-HP4 MUC-31-HP4 MUC-43-HP4 MUC-54-HP4 MUC-68-HP4

Code CL 04 571 CL 04 572 CL 04 573 CL 04 574 CL 04 575 CL 04 576 CL 04 577

Nominal air flow

H

m³/h

680 1,020 1,360 1,700 2,380 3,060 4,080

M 510 765 1,020 1,275 1,785 2,295 3,060

L 340 510 680 850 1,190 1,530 2,010

Total capacityof refrigeration

H

kW

3.7 4.9 7.5 9.3 12.8 15.9 20.1

M 3.0 4.0 6.1 7.5 10.4 12.9 16.3

L 2.2 2.9 4.5 5.6 7.7 9.5 12.1

Sensitive refrigerationcapacity

H

kW

2.6 3.6 5.4 6.6 9.1 11.5 14.6

M 2.1 2.9 4.3 5.3 7.3 9.2 11.7

L 1.5 2.1 3.2 3.9 5.4 6.8 8.6

Heatingcapacity

H

kW

5.5 7.5 11.3 13.9 19.1 24.2 30.7

M 4.4 5.9 8.9 11.0 15.1 19.2 24.3

L 3.0 4.2 6.3 7.7 10.6 13.4 17.0

Water flow m³/h 0.636 0.846 1.302 1.608 2.202 2.736 3.456

Hydraulic pressure loss kPa 13.6 22.9 10.8 15.7 32.1 9 11.1

Total cooling capacity 2 2 2 2 2 2 2

Fan diameter mm 145 145 180 180 200 225 225

Max. current consump. W 88 143 202 256 333 485 715

Current A 0.4 0.7 0.9 1.2 1.5 2.2 3.3

Static pressure Pa 62 62 81 103 117 132 122

Exchanger connections Rc3/4"

Dimensions (mm)

L 500 500 550 550 620 620 670

Width 825 825 1,000 1,000 1,200 1,400 1,400

High 260 260 315 315 315 350 400

Weight kg 28.5 29.30 39.90 40.15 49.20 59.90 63.95

Sound pressure dB(A) 44 47 52 52 60 62 66

Power supply 220-1-50

Remarks:

1. Cooling: inlet air 27 °C DB / 19.5 °C WB, water inlet 7 °C, water outlet 12 °C.2. Heating: inlet air 21 °C, water inlet 60 °C.

DIMENSIONS (mm)

ModelLength: Width Height Upper

holeUpper hole Port

A B C D E WideL

HeightW

12 500 825 260 860 400 675 185

16 500 825 260 860 400 675 185

25 550 1000 315 1035 450 850 240

31 550 1000 315 1035 450 850 240

43 620 1200 315 1235 520 1050 240

54 620 1400 350 1435 520 1250 275

64 670 1400 400 1435 570 1250 325

DUCT FAN COIL UNIT



CONTROL KIT FOR FANCOIL

- Compatible with ALL fan coil units without built-in control board.- Flexible installation, can be installed next to the fan coil unit,

on the wall or on the suspended ceiling.- It incorporates wired remote control and temperature probes,

allowing you to regulate: 3 ventilation speeds, condensate pump valves, auxiliary electrical resistance, external ON / OFF signals and alarm.

- Allows connection to centralized CCM control.- It allows Modbus communication.

CENTRALIZED CONTROLLER

MODBUS COMMUNICATION

SPECIFICATIONS

Model FCUKZ-03 FCUKZ-04

Code LC 04 531 LC 04 532

Application system 2 Pipes 4 Pipes

Power supply V/Ph/Hz 22-240 / 1 / 50-60 22-240 / 1 / 50-60

Operation rangeRoom temperature °C 17 - 30 17 - 30

Inlet water temp. °C 3 - 75 3 - 75

Temp. precision °C ± 1 ± 1

Dimensions (W x H x D) mm 296 x 66 x 212 296 x 66 x 212

Weight kg 1.4 1.4

Centralized controllerCCM

64 m max.

64 m max.

NEW



INVERTER WATER CHILLERMUENR-H6 Series

DC INVERTER FAN MOTOR AND COMPRESSOR

All range equipments include compressors and fan motors DC Inverter, in this way the performance for middle frequency system is improved and a more sensitive and effective control is assured.

HYDRAULIC MODULE

Hydraulic module is fully integrated and equipped with hydraulic components such as expansion tank, plate-type heat exchanger and water circulating pump.

HIGH EFFICIENCY WATER CIRCULATING PUMP

With the new water circulating pump in compliancewith the Ecodesign Directive ERP, power consumptionis reduced.

PLATE-TYPE HEAT EXCHANGER

The plate-type heat exchanger is made of AISI 316 stainless steel to ensure high heat exchange efficiency.

WALL-MOUNTED WIRE CONTROL(OPTIONAL)

All range units incorporate a control panel that lets you adjust all operating parameters. It is also possible to get a wall-mounted wire control. This way, you can control the unit from indoors.

WIDE RANGE OF OPERATING TEMPERATURES

The MUENR-H6 equipment can operate in extreme temperature conditions, in heating mode up to a temperature of -15 °C and in cooling mode up to 46 °C.

INTEGRATED AND COMPACT DESIGN

Fully integrated and built-in hydraulic module, such as expansion tank, plate type heat exchanger, water circulating pump, etc. It saves installation space and cost.

REMOTE CONTROL ON/OFF FUNCTION

Possibility of an ON/OFF function for the unitand selecting the operation mode using a potential free signal.

WATER PUMP STARTS/STOPS MANUAL FUNCTION.

Press “Check” button in the indoor PCB for3 seconds to start the water pump operation when the unit is in standby. Press “Check” button for 3 seconds again to stop the water pump.

Cooling mode

Heating mode

Operation Exterior

T11 Refrigerant inletT12 Refrigerant outletT21 20 °C. Water inlet:T22 Water outlet

KJR-120F1-BMK-E(code CL92340).



WATER CHILLERS INVERTER MUENR-H6 Series

ENERGY LABELING A+

Thanks to the plate heat exchanger, the high efficiency water circulating pump, the compressor and the fan motor DC Inverter, power consumption is reduced and the operation of the unit is optimized. The equipment has an energy efficiency rate of A+ when heating at 35 °C.

ENERGYEFFICIENCYCLASS A+

Model MUENR-05-H6

MUENR-07-H6

MUENR-10-H6

MUENR-12-H6

MUENR-12-H6T

MUENR-14-H6T

MUENR-16-H6T

Code CL 25 620 CL 25 621 CL 25 622 CL 25 623 CL 25 626 CL 25 627 CL 25 628Power supply V/F/Hz 220 - 240 / 1N / 50 380 - 415 / 3N / 50

Cooling

Conditions1 (1)

Capacity (min. - max.) kW 5.0(1.9~5.8)

7.0(2.1~7.8)

10.0 (2.9~10.5)

11.2 (3.1~12.0)

11.2 (3.1~12.0)

12.5 (3.3~14.0)

14.5 (3.5~15.5)

Consumption kW 1.55 2.25 2.95 3.50 3.38 3.90 4.70EER kW 3.23 3.11 3.39 3.20 3.31 3.20 3.10

Conditions2 (2)

Capacity kW 5.60 8.00 10.60 12.20 12.20 14.20 15.60Consumption kW 1.15 1.85 2.30 2.65 2.60 3.10 3.60EER kW 4.87 4.32 4.24 4.60 4.70 4.58 4.33SEER kW 5.83 6.07 5.71 6.37 6.18 6.69 6.78

Heating

Conditions3 (3)

Capacity (min. - max.) kW 6.2(2.1~7.0)

8.0(2.3~9.0)

11.0 (3.2~12.0)

12.3 (3.3~13.2)

12.3 (3.3~13.2)

13.8 (3.5~15.4)

16.0 (3.7~17.0)

Consumption kW 1.90 2.50 3.14 3.78 3.72 4.25 4.85COP kW 3.26 3.20 3.50 3.25 3.31 3.25 3.30

Conditions4 (4)

Capacity kW 6.20 8.60 11.50 13.00 13.00 15.10 16.50Consumption kW 1.35 2.10 2.65 2.92 2.85 3.35 3.92COP kW 4.60 4.10 4.34 4.45 4.56 4.51 4.21SCOP kW 3.55 3.46 3.34 3.46 3.66 3.78 3.39

Energy rating at low temperature (35 °C / s) A+ / 138.9% A+ / 135.3% A+ / 130.7% A+ / 135.4% A+ / 143.5% A+ / 148.3% A+ / 132.6%Max. current A 11.40 13.70 25.00 26.00 8.90 9.6 10.1

Compressor

Model SNB172FJGMC ATQ420D1UMU ATQ420D2UMUBrand Mitsubishi Electric GMCC GMCC GMCC GMCC GMCCRefrigerant oil

Type FV50S FV50S VG74 VG74 VG74 VG74 VG74Amount ml 400 400 1,400 1,400 1,400 1,400 1,400

FanType / Motor / Amount AXIAL / DC / 1 AXIAL / DC / 1 AXIAL / DC / 2 AXIAL / DC / 2 AXIAL / DC / 2 AXIAL / DC / 2 AXIAL / DC / 2Air flow rate m³/h 5,100 5,100 7,000 7,000 7,000 7,000 7,000

Plate-type heat exchanger

Water flow (min ~ max) m³/h 0.86(0.77~0.95)

1.24(1.08~1.54)

1.72(1.54~1.89)

1.92(1.72~2.11)

1.92(1.72~2.11)

2.15(1.93~2.36)

2.49(2.24~2.73)

Water volume L 0.53 0.53 0.7 0.78 0.78 0.78 1.06Water pressure drop kPa 15 15 18 18 18 18 19

Waterpump

Model RS15/6 RKC RS15/6 RKC RS25/7.5 RKC RS25/7.5 RKC RS25/7.5 RKC RS25/7.5 RKC RS25/7.5 RKCMaximum flow rate: m³/h 3.3 3.3 4 4 4 4 4Height m 5.5 5.5 7.5 7.5 7.5 7.5 7.5

Expansion tank Water volume L 2 2 3 3 3 3 3Max/min water pressure inlet (5) kPa 150 / 500 150 / 500 150 / 500 150 / 500 150 / 500 150 / 500 150 / 500Sound pressure (6) dB(A) 58 58 59 59 62 62 62Sound power (6) dB(A) 63 66 67 68 68 70 72Dimensions (W x H x D) mm 990 x 966 x 354 970 x 1327 x 400Weight kg 81 81 110 110 110 111 111

RefrigerantType R410A R410A R410A R410A R410A R410A R410AAmount kg 2.5 2.5 2.8 2.8 2.8 2.9 3.2

Connection wiring Power supply mm² 2 x 2.5 + T 2 x 4 + T 4 x 2.5 + T

Hydraulic connections Water inlet/outlet temperature inch 1" / 1" 1-1/4" / 1-1/4"

Operating temperaturerange

Cooling °C - 5 ~ 46Heating °C - 15 to 27 (by under 5 °C antifreeze should be added)

Water outlettemperature range

Cooling °C In discharge 4 ~ 15 (7)

Heating °C In discharge 40 ~ 55 (8)

Notes:(1) Conditions 1: Water inlet/outlet temperature: 12 / 7 °C, outdoor temperature 35 °C DB.(2) Conditions 2: Water inlet/outlet temperature: 23 / 18 °C, outdoor temperature 35 °C DB.(3) Conditions 3: Water inlet/outlet temperature: 40 / 45 °C, outdoor temperature 7 °C DB / 6 °C WB / 85% RH(4) Conditions 4: Water inlet/outlet temperature: 30 / 35 °C, outdoor temperature 7 °C DB / 6 °C WB / 85% RH(5) Pressure level to which pressure switches are activated(6) Measured at 1m distance in open field(7) The machine controls the return temperature, so that the minimum setting temperature is 10 °C, the 4 °C are for air outlet.(8) The machine controls the return temperature, so that the maximum setting temperature is 50 °C, the 55 °C are in delivery.



WATER CHILLERSMUEN-H6 Digital Scroll

DIGITAL SCROLL COMPRESSOR COPELAND®

In traditional air cooling systems the output capacity is monitored by on / off compressor control. The accuracy of the control mode is not very good and the compressor starts and stops frequently, which is not too good for its useful life.

The Digital Scroll air-cooled system breaks the traditional design. It is now manufactured with a parallel connection of a digital Scroll compressors and one (or two) fixed Scroll compressors.

The system can achieve a linear fit of its capacity, from 0.5 % to 100 %, this range is one of the larger from the sector. When the system is operating at partial load, it is possible to adjust accurately the cooling or heating power.

OPERATION UNDER LOW TEMPERATURES

Thanks to control condensation fan, units can operate in both cooling and heating up to -10 °C for outdoor temperature.

MODULAR SYSTEM

Modular design that allows up to 16 units can operate together, it can form an equipment of up to 1 024 kW.

EASY CONNECTION

Easy connection between the master and slave units. All units can be connected via a wired remote control (included with each unit) using a three pole shielded cable.

30 kW

65 kWOutput capacity with fixed compressor

Output capacity Digital Scroll

CL92266(Included)



SAFEGUARD FUNCTION

If the unit gives an error code (E *)

- If it is in the master unit, all units stop(a slave unit can be configured as master unitto activate the system temporarily).

If the error is in a slave unit, just that unit stops.

If the unit gives a protection code (P *), the unit stops but the rest keep ongoing, regardless of whether it is not the master unit (except PE and P9 codes).

NEW HEAT EXCHANGERS

More reliable system thanks to the new heat exchangers. 30 kW modules incorporate a heat exchanger of double pipe, while the 65 kW modules carry shell and tube heat exchanger.

CHECK FUNCTION

From the display of the electronic board of the unit, you can check various operating parameters in real time.

DIMENSIONS MUEN-30-H6T

DIMENSIONS MUEN-65-H6T

MUEN-H6 Digital Scroll WATER CHILLER

Front view

Front view

Top view

Top view

Double pipe exchanger.

Shell and pipe exchanger.

Master Slave Master Slave



TECHNICAL SPECIFICATIONSModel MUEN-30-H6T MUEN-65-H6T

Code CL 25 616 CL 25 617Power supply F, V, Hz 3N-, 400V, 50Hz 3N-, 400V, 50Hz

Cooling (1)

Capacity kW 30 65Power consumption kW 10 20.4Current A 16.3 36.5Max. current A 21.1 54.5EER W/W 3.00 3.18SEER W/W 3.21 3.15

Heating (2)

Capacity kW 32 69Power consumption kW 9.8 21.5Current A 16 37.2Max. current A 21.1 54.5COP W/W 3.27 3.21SCOP (heating 35 °C) W/W 3.14 3.04Energy labeling (heating 35 °C) A+ A+

Compressors

Brand Copeland CopelandType Scroll Scroll

Digital Scroll

Model ZPD67KCE-TFD-532 ZPD72KCE-TFD-433Amount 1 1Capacity kW 16.2 16.9Power consumption kW 5.26 5.75Max. current A 10.6 12.7

Fixed 1

Model ZP67KCE-TFD-522 ZP144KCE-TFD-522Amount 1 1Capacity kW 16.2 35.4Power consumption kW 5.2 10.8Max. current A 11.8 21.1

Fixed 2

Model ZP67KCE-TFD-420Amount 1Capacity kW 16.2Power consumption kW 5.2Max. current A 11.8

FanAmount 1 2Air flow rate m³/h 12,000 24,000Power kW 0.670 0.865 x 2

Sound pressure (3) dB(A) 65 67Sound power (3) dB(A) 80 83

Water exchanger

Type Double tube Casing and tubeWater pressure drop kPa 60 15Volume L 10 42Nominal flow m³/h 5.2 11.2Degree of soiling m²·°C /kW 0.086 0.086Max. design pressure Mpa 1 1Connection type Flanged FlangedHydraulic connections mm (inches) DN40 (1 1/2") DN 100 (4")

DimensionsNet dimensions (Width x Height x Depth) mm 1514 x 1865 x 841 2000 x 1880 x 900Gross Dimensions (Width x Height x Depth) mm 1590 x 2065 x 995 2106 x 2090 x 998

WeightNet kg 375 610Gross kg 400 680

RefrigerantType R410A R410AAmount kg 3.5 x 2 7 x 2

Electrical connections Power wiring (4) mm² 4 x 10 + T (L<20m) 4 x 25 + T (L<20m)Communication wiring (5) mm² 3 x 0.75 (shielded) 3 x 0.75 (shielded)

Ambient temperature in operationCooling °C -10 to 46 -10 to 46Heating °C -10 to 21 -10 to 21

Water temperature in operationCooling (6) °C 0 to 17 0 to 17Heating °C 22 to 50 45 to 50

Notes:(1) Nominal conditions cooling: Water temperature 12 °C (Inlet), 7 °C (Outlet), outdoor temperature 35 °C DB. Water flow rate 0.172 m³/(h·KW).(2) Nominal conditions heating: Water temperature 40 °C (Inlet), 45 °C (Outlet), outdoor temperature 7 °C DB. Water flow rate 0.172 m³/(h·KW).(3) Sound level measured at 1 m of distance in an open field.(4) Power wiring recommended for L < 20 m, for longer distances it should be calculated.(5) Remote control wiring and interconnection of several modules.(6) Below 5 °C antifreeze must be added to the hydraulic circuit.It does not include hydronic kit

MUEN-H6 Digital Scroll WATER CHILLER

High efficiency Aerothermal energy V17 SeriesHeating | Cooling | Sanitary Hot Water

BIBLOC Series

SeriesMONOBLOC



AEROTHERMHeat pump for HEAT WATER, HEATINGAIR CONDITIONER production

The solution All in One: Mundoclima Aerotherm V17, is the All-in-One solution, which produces heat and cold for housing as well as sanitary hot water throughout the year. Apart from the system it can be completed with gas boilers or conventional gas-oil and solar energy systems.

Aerotherm V17 is offered in Monobloc and Bibloc versions. In the Monobloc version the hydronic unit of hydro / gas exchange is located in the same outdoor unit. The Bibloc version, on the other hand, has the external unit and the hydronic indoor unit separated, offering more flexibility. Both versions can get the energy label A ++, so they are equipment with the highest performance of energy efficiency contributing significantly to limit an impact on the environment.

Range of products

Capacity (kW) 7 12 16

MONOBLOC

General view

220~240V-1Ph

Capacity (kW) 6 8 10 12 14 16

BIBLOC

General view

220~240V-1Ph

Outdoor unit Hydronic box (4-8 kW) Hydronic box (1Ph,10-16 kW)



295

AEROTHERMMonobloc Aerotherm V17Its compact structure of easy transport and installation and its two doors to easy access to the internal parts, make from the B.C. Aerotherm V17, one of the most interesting solutions to air-conditioning at home. Compatible with other energy sources such as solar energy, gas boiler and / or diesel. It can work in parallel with other heat pump units. With hydronic module integrated in the same unit generating sanitary hot water. Resistance included except 7 kW which is optional. The pipes that connect the receiving units to the Monobloc unit are made with water.

Code Item €

SO 30 174 MONOBLOC AEROTHERM V17 from 7 kW (230V) 3,150.00



Model 7 kW 12 kW 16 kWCode SO 30 174 SO 30 176 SO 30 178Nominal voltage V/Ph/Hz 220-240/1/50 220-240/1/50 220-240/1/50

Heating capacity1 Total power kW 6.55 12.17 16.33Absorbed power kW 1.45 2.73 3.90COP 4.52 4.46 4.19

Heating capacity2

Total power kW 6.69 12.58 16.12Absorbed power W 2.05 3.86 5.22COP 3.26 3.26 3.09

Cooling capacity3

Total power kW 6.45 12.19 14.82Absorbed power W 1.47 2.65 3.66EER 4.40 4.60 4.05

Cooling capacity4

Total power kW 6.71 12.21 13.72Absorbed power kW 2.57 4.17 5.16EER 2.61 2.93 2.66

Energy efficiencyWater outlet @35 °C LOT1 A++ A++ A++Water outlet @55 °C LOT1 A+ A+ A+

Sound level Heat / Cold dB(A) 65 / 66 67 / 68 72 / 71Dimensions (W x H x D) mm 1210x945x402 1404x1414x405 1404x1414x406Packing (width x height x depth) mm 1500x1140x450 1475x1580x440 1475x1580x441Net/ gross weight kg 99 / 117 162 / 183 162 / 183Compressor Type Double rotational Inverter

FanMotor type Brushless DC MotorAir flow rate m³/h 3100 6250 6250

Air exchanger Fins batteryWater exchanger Heat-sealed platesWater circulating pump m 6.0 7.5 7.5Expansion tank volume L 2 5 5

RefrigerantType R410A R410A R410ALoad kg 2.4 3.6 3.6

Accelerator type Electronic expansion valve

Electric resistanceMounted in series kW Optional 3 3Stages 1 2 2Nominal voltage V/Ph/Hz 220-240/1/50 220-240/1/50 220-240/1/50

Water pipe connections inch. 1" Female 1-1/4" Female 1-1/4" Female

Operation temperature range

Cooling °C -5~46 -5~46 -5~46Heating °C -20-35 -20-35 -20-35SHW °C -20-43 -20-43 -20-43

Outlet water temp. rangeCooling °C 5~25 5~25 5~25Heating °C 25~60 25~60 25~60SHW °C 40~60 40~60 40~60

Nominal capacity is based on the following conditions:1. Outdoor air temperature 7 °C RH 85%. Inlet/Outlet temp. water 30/35 °C.2. Outdoor air temperature 7 °C RH 85%. Inlet/Outlet temp. water 40/45 °C.3. Outdoor air temperature 35 °C. Inlet/Outlet temp. water 23/18 °C.4. Outdoor air temperature 35 °C. Inlet/Outlet temp. water 12/7 °C.5. The previous test temperatures come from the standards: EN14511:2013; EN14825:2013; EN50564:2011; EN12102:2011; (EU)No:811:2013;

(EU)No:813:2013; OJ 2014/C 207/02:201.



AEROTHERMBibloc Aerotherm V17The new Bibloc M. Aerotherm V17 version is offered in 6 single-phase power ranges. Its outdoor unit system with indoor hydronic unit is of easy installation as well as the connection between them. The connection pipes, do not need extra insulation to prevent freezing. For distances less than 10 meters between the indoor hydronic unit and the external unit, the addition of more gas is not necessary.

Code Item €

OUTDOOR UNIT

SO 30 161 BIBLOC AEROTHERM V17 from 6 kW (230V) 1,525.00






INDOOR UNIT

SO 30 170 BIBLOC AEROTHERM V17 from 6 to 8 kW (230V) 2,150.00

SO 30 171 BIBLOC AEROTHERM V17 from 10 to 16 kW (230V) 2,340.00

BIBLOC: Internal Unit Hydronic

Model from 4 to 8 kW from 10 to 16 kW

Code SO 30 170 SO 30 171

Type Heating and cooling Heating and cooling

Outlet water temp. range

HeatingLow °C 25 - 55, default 35 25 - 55, default 35

Height °C 35 - 60, default 45 35 - 60, default 45

CoolingLow °C 7 ~ 25, default 7 7 ~ 25, default 7

Height °C 18 ~ 25, default 18 18 ~ 25, default 18

Sanitary Hot Water °C 40 ~ 60, default 45 40 ~ 60, default 45

Nominal voltage V/Ph/Hz 220-240/1/50 220-240/1/50

Dimensions (Width x Height x Depth) mm 400 x 865 x 427 400 x 865 x 427

Dimensions (Width x Height x Depth) mm 495 x 1040 x 495 495 x 1040 x 495

Net/ gross weight kg 51/57 54/60

Water circuit

Output connection mm DN25 DN25

Safety valve MPa 0.3 0.3

Water volume L 5 5

Drain connection mm Ø16 Ø16

Expansion tank

Volume L 3 3

Maximum pressure MPa 0.8 0.8

Preloading pressure MPa 0.15 0.15

Plate heat exchanger

Type Thermo-welded plates Thermo-welded plates

Volume L 0.7 1

Circulator m 6 7.5

Cooling circuitLiquid mm Ø9.5 Ø9.5

Gas mm Ø15.9 Ø15.9

Electric resistance

Power kW 3.0 3.0

Stages 2 2

Nominal voltage V/Ph/Hz 220-240/1/50 220-240/1/50

Rated capacity is based on the following conditions:1. Condition 1: Heat mode outdoor temperature 7 °C and outlet water 35 °C with ∆T at 5 °C. Cool mode outdoor temperature 35 °C and water outlet 18 °C with ∆T at 5 °C.2. Condition 2: Heat mode outdoor temperature 7 °C and outlet water 45 °C with ∆T at 5 °C. Cold mode outdoor temperature 35 °C and outlet water 7 °C with ∆T at 5 °C.3. The above data are from the reference standard EN14511.

Prioritymode

Cooling

Vacations mode

Prioritymode

Heating

ForceSHWmode

PrioritySanitary

Hot Water

ECOMode

AUTOmode

Comfort mode

Disinfection mode

Silent mode

60~70°C



297

BIBLOC: Outdoor unit

Model 6 kW 8 kW 10 kW 12 kW 14 kW 16 kWCode SO 30 161 SO 30 162 SO 30 163 SO 30 164 SO 30 165 SO 30 166Nominal voltage V/Ph/Hz 220-240/1/50 220-240/1/50 220-240/1/50 220-240/1/50 220-240/1/50 220-240/1/50

Heating capacity1

Total power kW 6.10 8.00 10.00 12.10 14.00 15.50Absorbed power kW 1.29 1.73 2.17 2.74 3.39 3.82COP 4.73 4.62 4.61 4.42 4.13 4.06

Heating capacity2

Total power kW 5.96 7.34 10.12 11.85 14.05 16.05Absorbed power kW 1.68 2.13 2.93 3.48 4.41 5.03COP 3.55 3.45 3.45 3.41 3.19 3.19

Cooling capacity3

Total power kW 6.00 8.00 10.00 11.80 13.00 14.00Absorbed power kW 1.29 1.78 2.07 2.65 3.23 3.62EER 4.66 4.49 4.83 4.45 4.02 3.87

Cooling capacity4

Total power kW 6.15 6.44 9.39 11.02 12.49 12.85Absorbed power kW 2.08 2.24 3.26 4.17 5.07 5.39EER 2.96 2.88 2.88 2.64 2.46 2.38

Energy efficiency

Water outlet @35 °C LOT1 A++ A++ A++ A++ A++ A++Water outlet @55 °C LOT1 A+ A++ A+ A++ A+ A++

Sound level Heating dB(A) 66 68 64 68 71 71Dimensions (W x H x D) mm 960x860x380 1075x965x395 900x1327x400 900x1327x400 900x1327x400 900x1327x400Packing (width x height x depth) mm 1040x1000x430 1120x1100x435 1030x1457x435 1030x1457x435 1030x1457x435 1030x1457x435Net/ gross weight kg 60 / 72 76 / 88 99 / 112 99 / 112 99 / 112 99 / 112Compressor Type Double rotational Inverter

FanMotor type Brushless DC MotorAir flow rate m³/h 3050 5100 6500 6500 6500 6500

Air exchanger Finned battery

Pipeline connection

LiquidType Cooling copperExternal diameter mm Ø9.5 Ø9.5 Ø9.5 Ø9.5 Ø9.5 Ø9.5

GasType Cooling copperExternal diameter mm Ø15.9 Ø15.9 Ø15.9 Ø15.9 Ø15.9 Ø15.9

Piping distance

Min. m 2 2 2 2 2 2Maximum m 20 30 50 50 50 50

Installation height

Outdoor ut. over m 10 20 30 30 30 30Outdoor ut. under m 8 15 25 25 25 25

RefrigerantType R410A R410A R410A R410A R410A R410ALoad kg 2.5 2.8 3.9 3.9 3.9 3.9

Working temperature Cold / Heat / Hot water °C -5 ~ 46 / -20 ~ 35 / 20 ~ 43

Nominal capacity is based on the following conditions:1. Outdoor air temperature 7 °C RH 85%. Inlet / outlet water temp. 30/35 °C2. Outdoor air temperature 7 °C RH 85%. Inlet / outlet water temp. 40/45 °C3. Outdoor air temperature 35 °C. Inlet/Outlet temp. water 23/18 °C.4. Outdoor air temperature 35 °C. Inlet/Outlet temp. water 12/7 °C.5. The previous test temperatures come from the standards: EN14511:2013; EN14825:2013; EN50564:2011; EN12102:2011; (EU)No:811:2013;

(EU)No:813:2013; OJ 2014/C 207/02:201.

Bibloc Aerotherm V17

1 Outdoor unit2 Hydronic indoor unit3 Plate-type heat exchanger4 Electric resistance5 Water circulating pump6 Control panel7 Straight pass valve (not included)8 3 way valve (not included)9 Circulator (not included)10 2 way valve (not included)11 Collector (not included)12 Solar hydraulic group13 SHW tank (not included)14 Heat exchanger (not included)15 Backup heater (not included)FHL1…n (not included)FCU1 ... n Fan coil (not included)SP Solar thermal energy (not included)

10

9

M



HEAT PUMP FOR SHW MONOBLOCK System Copper condenser, spirally attached to the outside of the accumulator, it ensures that the refrigerant can never be in contact with water. Distributed asymmetrically over the whole height of the accumulator, with greater surface in the lower cap, which favors a homogeneous distribution of the water temperature.

Models of 150 and 200 liters capacity: Operation with heat pump and / or resistance support, 1 or 2, for a total operation autonomy. Helical fan for free discharge.

Models for 300 capacity liters: Equipped with an hydraulic exchanger to connect to a solar energy installation or to any other energy production system. Centrifugal fans that allow the conduction of condensation air, which increases the installation POSSIBILITIES and / or operation and increases performance.

Code Item €

HEAT PUMP FOR SHW

SO 30 010 MUNDOCLIMA AEROTHERM 150 liters 1,320.00

SO 30 011 MUNDOCLIMA AEROTHERM 200 liters 1,650.00

SO 30 012 MUNDOCLIMA AEROTHERM 300 liters with coiland air conduction. 2,315.00

TECHNICAL FEATURES Model 150 L 200 L 300 L

Working conditions, room temp. °C -7 / 43 -7 / 43 -7 / 43Nominal capacity Liters 150 190 300Power given / consumed kW 1.85 / 0.53 1.85 / 0.53 3 / 0.83COP 3.5 3.5 3.6Min.-max. consumption A 2.4 - 11.5 2.4 - 11.5 3.7-17.4Voltage V-Hz 230V-I-50Hz 230V-I-50Hz 230V-I-50HzAir flow rate m³/h 350 350 450Sound level dB(A) 48 48 48Dimensions (D x H) mm 568/1430 568/1580 650/1920Weight (net / package) kg 87/98 91/102 105/120Refrigerant type / load kg R134a/0.8 R134a/1.2 R134a/1.2Hydraulic connections mm DN20 DN20 DN20Test pressure bar 12 12 12Max. working pressure bar bar 7 7 7Water inlet/outlet temperature °C 38/70 prefixed 60 38/70 prefixed 65 38/70 prefixed 65

Solar hydraulic exchanger

Connections mm – – DN20Tube diam / long. mm – – Ø22/10000

Max. pressure bar – – 7

Condensation air

Connection diameter mm – – 190

ASP mm WCLM – – 30Max. ducts length m – – 10Support resistance kW 2 2 3

Different solutions of the condensation air intakes. In all cases the maximum length will be 10 m. In the case of conducting the entrance and exit, the sum of both ducts will be equal to or less than 10 m.

2015

Y IJA

IE IA

E

200L

L

2015

Y IJA

IE IA

E

300L

XL

150 L and 200 L

300 L

300 L + hydraulic Kit

NEW150 liters



299

HEAT PUMP FOR SANITARYHOT WATER

SPLIT SystemThe most efficient option to cover the hot water supply for home installation andfor the service sector (gyms, residences, small urban hotels, etc.). It has a daily consumption of up to 3000 l / day. For the best performance it is necessary to analyze the actual demand of the place and to store enough sanitary hot water.

The system consists of an air-water heat pump, which incorporates a tubular heat exchanger, liquid water, with double chamber, which ensures the tightness between the coolant and the water, even in the event of leakage, and a SHW accumulator vitrified from 500 to 1000 l, with built-in resistance. With the highest power model (7.2 kW) we can have 1000 liters at 55 °C first thing in the morning, enough to meet the peak demand of approximately 35 to 40 shower services at 40 °C.

Installation is very simple. Insulated copper tubing connects the heat pump to the accumulator, up to a maximum distance of 5 m and a maximum level difference of3 m, between the outdoor unit and the accumulator. The circulation pump, built-in the outdoor unit, heats the water of the accumulator as it passes through the exchanger. The temperature control is carried out by means of an electronic board built-in the outdoor unit.

Code Item €

HEAT PUMPFOR SHW SPLIT

SO 30 022 ACS 5 kW heat pump 1,550.00

SO 30 023 ACS 7.2 kW heat pump 1,734.00

TECHNICAL FEATURES

Model RSJF-50/CN1-A RSJF-72/CN1-B

Voltage V-Hz 1-220V-50Hz 1-220V-50Hz

Thermal capacity kW 5 7.2

Electric power kW 1.29 2.02

COP 3.88 3.56

Consumption A 5.9 8.5

Max. consumption A 8 13.7

Start consumption A 29.9 36.8

Air flow rate m³/h 2000 3200

Sound level dB(A) 55 55

Unit dimensions (W x H x D) mm 790x736x260 840x940x324

Dimens. with packaging(W x H x D) mm 905x807x355 965x1009x395

Weight kg 62/66 81/86.5

Refrigerant / quantity kg R410A/1.22 R410A/1.3

Hydraulic connections DN15 DN15

Max. length m 5 5

Max. height for unit / accumulator m 3 3

Working conditions Performance tests: Outdoor temperature 7.0 / 6.0 °C (dry / wet bulb); Water inlet 30 °C, outlet 35 °C. Operating temperatures -7 / 43 °C.

Tubular exchanger detail

Heat Pump Diagram

Outdoor unit RSJF-50

Double tube

Refrigerant

Water

HOTWATER

As part of the global brand positioning strategy in the global air-conditioning market, in 2017 emerge a

Exclusive trading partner in Spain of AUX Group

www.auxspain.es [email protected]

AUX Group

It is a company with a global presence, aimed at satisfying the needs of its clients. Founded in China more than 24 years ago, with 9 production plants located in Ningbo, Nanchang, Shenzhen, Shanghai and Tianjin, and with a staff of more than 20,000 employees, it has been successfully consolidated in the following industries:

• Air conditioner• Home appliances• Power meters• Transformers• Telecommunications• Real state

Since its origin, the AUX Group has experienced tremendous prosperity and it achieved extraordinary goals. This is due to the quality of the human resources and the practice of values such as honestyand trust.

AUX Group has been recognized in its country of origin as one of the 500 best companies, one of the 25 most competitive companies, leading company in Information, and key company in Science and Technology. The construction of the “International Technological Park AUX” that occupies 2.08 square kilometers allows to have in one place the facilities for: Research & Development, Manufacturing, Training and Exhibition. AUX Group is today one of the leading air-conditioning manufacturers in China, and AUX equipment is already marketed worldwide.

As part of the global strategy of brand positioning in the international home appliance market, in 2017 emerges AUX Spain, as exclusive trading partner in Spain of the AUX Group.

The main goal of AUX Spain is to offer to the Spanish market products with the best international quality standards.Currently AUX puts at your disposal one of the best air conditioning technologies in the world. Our teams are supported by a global brand, which is involved providing their consumers with the safety, comfort, and well-being they need.

Our annual figures are as follows:

7 millionsair conditioner units

+ 20 000employees

+ 600engineers

5 millionsSmartphones



WALL SPLIT INVERTER QC


€Cooling Heating

CL 80 005

CL 80 006

CL 80 007

CL 80 008

ASW-09-QC

ASW-12-QC

ASW-18-QC

ASW-24-QC

2,550

3,550

5,100

7,000

2,650

3,550

5,400

7,300

595.00

625.00

1,075.00

1,395.00


WALL SPLIT INVERTER FC


€Cooling Heating

CL 80 001

CL 80 002

CL 80 003

CL 80 004

ASW-09-FH

ASW-12-FH

ASW-18-FH

ASW-24-FH

2,500

3,500

5,100

7,000

2,600

3,500

5,300

7,300

540.00

560.00

975.00

1,260.00


MULTI SPLIT INVERTER AM


€Cooling Heating

OUTDOOR UNITS

CL 80 100

CL 80 101

AM2-H18/4DR1 (2×1)

AM3-H27/4DR1 (3×1)


5,000

7,520

5,500

7,950

1,224.00

1,580.00

WALL INDOOR UNITS FH

CL 80 110

CL 80 111

CL 80 112

AMW-09-FH

AMW-12-FH

AMW-18-FH


2,550

3,600

5,200

2,650

3,700

5,500

221.00

233.00

349.00

RangePREMIUM

RangeTACTIC



1x1 INVERTER WALL SPLITASW-QC Series

TECHNICAL SPECIFICATIONSModel ASW-09-QC ASW-12-QC ASW-18-QC ASW-24-QC

Code CL 80 005 CL 80 006 CL 80 007 CL 80 008

Cooling


Heating



Pdesignh kW 2.65 3.55 5.40 7.30SCOP W/W 4.0 4.0 4.0 4.05Energy labeling A+ A+ A+ A+Tbiv °C 2 2 2 2

Tol °C -10 -10 -10 -10Power supply V-Hz-Ph 220-240V~ 50Hz, 1PhMax. consumption kW 1.8 1.8 3.2 3.6Max. current A 8 8 14 16

Indoorunit

Air flow (High / Medium / Low) m³/h 650 / 590 / 530 /475 / 390

650 / 590 / 530 /475 / 390

1000 / 910 / 825 / 740 / 610

1200 / 1136 / 1030 / 925 / 770

Sound pressure (Turbo / High / Medium / Low / Silence) dB(A) 42 / 37 / 33 / 27 / 23 42 / 37 / 33 / 27 / 23 46 / 41 / 36 / 30 / 25 49 / 44 / 39 / 33 / 26Sound power (High) dB(A) 51 53 54 60Dimensions (W x H x D) mm 800 x 300 x 198 800 x 300 x 198 970 x 315 x 235 1100 x 330 x 235Weight kg 9 9 14 16

OutdoorUnit

Air flow rate (max.) m³/h 2000 2000 2150 3000Sound pressure (High) dB(A) 52 52 57 58Sound power (High) dB(A) 59 60 63 64Dimensions (W x H x D) mm 730 x 545 x 285 730 x 545 x 285 800 x 545 x 315 900 x 700 x 350Weight kg 27 27 35 49

Refrigerant

Type R410A R410A R410A R410ALoad kg 0.78 0.75 1.4 1.6Preload until m 5 5 5 5Additional load (from 5 m) g/m 20 25 30 40

Connectionpipes

Liquid mm(inch) Ø6.35 (1/4") Ø6.35 (1/4") Ø6.35 (1/4") Ø9.52 (3/8")Gas mm(inch) Ø9.52 (3/8") Ø9.52 (3/8") Ø12.7 (1/2") Ø15.9 (5/8")Max. Length m 20 20 25 25Max. Drop Height m 10 10 15 15

Electricalwiring

Supply (indoor unit) mm² 2 x 2.5 + T 2 x 2.5 + T 2 x 2.5 + T 2 x 4 + TInterconnection mm² 3 x 2.5 + T 3 x 2.5 + T 3 x 2.5 + T 3 x 4 + T

Wireless remote control L Series L Series L Series L Series

Operationtemperature

Indoor (Cooling / Heating) °C 18 ~ 32 / 0 ~ 30 18 ~ 32 / 0 ~ 30 18 ~ 32 / 0 ~ 30 18 ~ 32 / 0 ~ 30 Outdoor (Cooling / Heating) °C -10 ~ 47 / -10 ~ 30


SCOPA+

SEERA++

L Series



Anti-Fungus FunctionThis function helps to prevent mold and bacteria from forming on the indoor unit. If the function is active, the device will activate Anti-Mold prevention after cooling and dehumidification.

Low voltage startThe equipment can start and run normally up to a supply voltageof 165 V.

Smart DefrostWhen in heating mode the external battery freezes in the unit, the defrost mode is automatically activated.

Heating at low temperaturesOperation in cooling up to -10 °C outdoor temp.

Emergency switchPossibility of unit operation with the manual button in case of activation of some alarms.

Auto diagnosisWhen a problem occurs, the unit displays the error or protection code on the indoor unit.

iFEELThe wireless remote control incorporates a temperature sensor. In this way you get a better control and comfort of the room temperature.

TurboThis function allows youto reduce the cooling / heating time to the maximum.

SleepThis feature helps to save energy and provides more comfort at night. If activated, the equipment automatically increases (in cooling) or decreases (in heating) the set temperature by 1 °C every hour for the first 2 hours. The unit automatically stops 7 hours after activation of the function.

Spot SwingThis function allows the horizontal blade to oscillate automatically,if you want to fix it in a certain position, press the button that activates this function again.

0.5 W StandbyThe outdoor unit is automatically disconnected from the supply when the unit is in standby, in that way the consumption in standby modus is only 0.5W.

Auto-RestartThe machine automatically recovers the settings prior to power failure.

Super quiet designThe equipment has been designed and optimized with the aim of minimizing noise from the noisiest components.


TimerThe equipment can be started or stopped in 24-hour daily periods.

iCleanThis function performs a self cleaning on the indoor unit. When the “iClean” function is activated, the unit initially operates in cooling mode with the fan at low speed, during this period the condensation water drags the dust of the battery. The unit then switches to heating mode with the fan at low speed, to dry the battery and the inside of the unit. Finally the unit switches to ventilation mode to finish drying completely.

Fan bladesThe fan blades of the outdoor unit in the form of a saw to decrease the resistance to air and thus minimize the sound level.

Refrigerant leak detectionThe unit automatically detects possible refrigerant leaks in the circuit.

Cold air protectionIn heating, the initial fan speed is adjusted according to the temperature of the battery.

SilenceThis feature allows you to select the ultra-quiet speed, in this way the sound level of the equipment is very low.

Wifi (optional)Possibility of installing a WIFI module. Control your AUX air conditioner from anywhere.

1x1 INVERTER WALL SPLIT QC




ASW-09-QC 2x2.5 + T 3x2.5 + TASW-12-QC 2x2.5 + T 3x2.5 + TASW-18-QC 2x2.5 + T 3x2.5 + TASW-24-QC 2x4 + T 3x4 + T

WIFI MODULE

Model Code

ASW-09-QCCL 93 392

ASW-12-QCASW-18-QC

CL 93 390ASW-24-QC


ModelPipe Max.

Length(B)

Max. slope(A)

Preload until(m)


ASW-09-QC 1/4" 3/8" 20 10 5 20ASW-12-QC 1/4" 3/8" 20 10 5 25ASW-18-QC 1/4" 1/2" 25 15 5 30ASW-24-QC 3/8" 5/8" 25 15 5 40


1 2



1x1 INVERTER WALL SPLIT MUPR-H5A Series


Model ASW-09-FH ASW-12-FH ASW-18-FH ASW-24-FH

Code CL 80 001 CL 80 002 CL 80 003 CL 80 004

Cooling


Heating



Pdesignh kW 2.6 3.5 5.3 7.3SCOP W/W 4.0 4.0 4.0 4.05Energy labeling A+ A+ A+ A+Tbiv °C 2 2 2 2

Tol °C -10 -10 -10 -10Power supply V-Hz-Ph 220-240V~ 50Hz, 1PhMax. consumption kW 1.5 1.9 2.8 3.6Max. current A 8 9.5 11 16

Indoorunit

Air flow rate (Turbo / High / Medium / Low) m³/h 550 / 500 / 450 / 405 550 / 500 / 450 / 405 900 / 818 / 740 / 666 1250 / 1090 / 990 / 890Sound pressure (Turbo / High / Medium / Low) dB(A) 42 / 37 / 33 / 27 42 / 37 / 33 / 27 48 / 43 / 38 / 32 50 / 45 / 40 / 34Sound power (High) dB(A) 51 53 56 60Dimensions (W x H x D) mm 750 x 285 x 200 750 x 285 x 200 900 x 311 x 225 1082 x 330 x 233Weight kg 8 8.5 12 16

OutdoorUnit

Air flow rate (max.) m³/h 2000 2000 2150 3000Sound pressure (High) dB(A) 52 52 54 55Sound power (High) dB(A) 57 60 63 64Dimensions (W x H x D) mm 730 x 545 x 285 730 x 545 x 285 800 x 545 x 315 900 x 700 x 350Weight kg 27 27 35 49

Refrigerant

Type R410A R410A R410A R410ALoad kg 0.78 0.78 1.4 1.6Preload until m 5 5 5 5Additional load (from 5 m) g/m 20 25 30 40

Connectionpipes

Liquid mm(inch) Ø6.35 (1/4") Ø6.35 (1/4") Ø6.35 (1/4") Ø9.52 (3/8")Gas mm(inch) Ø9.52 (3/8") Ø9.52 (3/8") Ø12.7 (1/2") Ø15.9 (5/8")Max. Length m 20 20 25 25Max. Drop Height m 10 10 15 15

Electrical wiring

Supply (indoor unit) mm² 2 x 2.5 + T 2 x 2.5 + T 2 x 2.5 + T 2 x 4 + TInterconnection mm² 3 x 2.5 + T 3 x 2.5 + T 3 x 2.5 + T 3 x 4 + T

Wireless remote control H Series H Series H Series H Series


Indoor (Cooling / Heating) °C 18 ~ 32 / 0 ~ 30 18 ~ 32 / 0 ~ 30 18 ~ 32 / 0 ~ 30 18 ~ 32 / 0 ~ 30 Outdoor (Cooling / Heating) °C -10 ~ 47 / -10 ~ 30


SCOPA+

SEERA++

H Series



Anti-Fungus FunctionThis function helps to prevent mold and bacteria from forming on the indoor unit. If the function is active, the device will activate Anti-Mold prevention after cooling and dehumidification.

Low voltage startThe equipment can start and run normally up to a supply voltageof 165 V.


Emergency switchPossibility of unit operationwith the manual button in case of activation of some alarms.

Auto diagnosisWhen a problem occurs, the unit displays the error or protection code on the indoor unit.

iFEELThe wireless remote control incorporates a temperature sensor. In this way you geta better control and comfortof the room temperature.

TurboThis function allows youto reduce the cooling / heating time to the maximum.



0.5 W StandbyThe outdoor unit is automatically disconnected from the supply when the unit is in standby, in that way the consumption in standby modus is only 0.5W.

Auto-RestartThe machine automatically recovers the settings prior to power failure.

Super quiet designThe equipment has been designed and optimized withthe aim of minimizing noise from the noisiest components.


TimerThe equipment can be started or stopped in 24-hour daily periods.

iCleanThis function performs a self cleaning on the indoor unit. When the “iClean” function is activated, the unit initially operates in cooling mode with the fan at low speed, during this period the condensation water drags the dust of the battery. The unit then switches to heating mode with the fan at low speed, to dry the battery and the inside of the unit. Finally the unit switches to ventilation mode to finish drying completely.


Refrigerant leak detectionThe unit automatically detects possible refrigerant leaks in the circuit.

Cold air protectionIn heating, the initial fan speedis adjusted according to the temperature of the battery.


1x1 INVERTER FH WALL SPLIT




ASW-09-FH 2x2.5 + T 3x2.5 + TASW-12-FH 2x2.5 + T 3x2.5 + TASW-18-FH 2x2.5 + T 3x2.5 + TASW-24-FH 2x4 + T 3x4 + T

WIFI MODULE

Model Code

ASW-09-FHCL 93 392

ASW-12-FHASW-18-FH

CL 93 390ASW-24-FH


ModelPipe Max.

Length(B)

Max. slope(A)

Preload until(m)


ASW-09-FH 1/4" 3/8" 20 10 5 20ASW-12-FH 1/4" 3/8" 20 10 5 25ASW-18-FH 1/4" 1/2" 25 15 5 30ASW-24-FH 3/8" 5/8" 25 15 5 40


1 2



MULTISPLIT INVERTER AMOutdoor Unit MULTI2x1 and 3x1 Series









Model AM2-H18/4DR1 (2x1) AM3-H27/4DR1 (3x1)

Code CL 80 100 CL 80 101

Cooling

Nominal capacity (min. - max.) kW 5.0 (2.2 ~ 5.8) 7.52 (2.2 ~ 8.1)

Nominal consumption (min. - max.) kW 1.54 (0.28 ~ 2.10) 2.35 (0.58 ~ 3.20)

Pdesignc kW 5.00 7.50

SEER W/W 6.20 6.10

Energy labeling A++ A++

Heating

Nominal capacity (min. - max.) kW 5.5 (2.75 ~ 6.38) 7.95 (2.39 ~ 8.75)

Nominal consumption (min. - max.) kW 1.53 (0.28 ~ 2.10) 2.48 (0.56 ~ 2.83)

Pdesignh kW 5.30 7.70

SCOP W/W 4.10 4.10

Energy labeling A+ A+

Tbiv °C 2 2

Tol °C -10 -10

Power supply V-Hz-Ph 230 / 50 / 1Ph 230 / 50 / 1Ph

Max. consumption kW 2.7 4.5

Max. current A 13 19.5

Outdoor unit

Air flow rate (max.) m³/h 2,900 3,600

Sound pressure (High) dB(A) 56 56

Sound power (High) dB(A) 63 65

Dimensions (W x H x D) mm 822 x 655 x 302 822 x 655 x 302

Weight kg 42 52

Refrigerant

Type R410A R410A

Load kg 1.3 1.6

Preload until (total pipes) m 10 15

Additional charge g/m 22 22

Connection pipes

Liquid mm(inch) (1/4") x 2 (1/4") x 3

Gas mm(inch) (3/8") x 2 (3/8") x 3

Maximum pipe length m 30 45

Length for indoor unit m 15 15

Max. Drop Height m 10 10

Difference of height between Indoor uts. m 5 5

Electrical wiringPower supply (outdoor unit only) mm² 2 x 2.5 + T 2 x 4 + T

Interconnection per indoor unit mm² 3 x 1.5 + T 3 x 1.5 + T

Operation temp.Indoor (Cooling / Heating) °C 18 ~ 32 / 0 ~ 30 18 ~ 32 / 0 ~ 30

Outdoor (Cooling / Heating) °C -10 ~ 52 / -15 ~ 24 -10 ~ 52 / -15 ~ 24

Warning:1. Data and specifications are subject to changes without previous notice.2. The values of noise level match with values obtained in the semi-anechoic chamber.3. The capacity, consumption and SEER / SCOP values indicated are for AMW-09-FH indoor units

(just as much outputs has the outdoor unit).



MULTISPLIT INVERTER AMWall Type AMW-FH Series

Model AMW-09-FH AMW-12-FH AMW-18-FH

Code CL 80 110 CL 80 111 CL 80 112

CoolingRated capacity (min. ~ max.) kW 2.55 (1.40 - 3.30) 3.60 (1.70 - 3.70) 5.20 (2.50 - 5.80)

Rated consumption (min. - max.) W 40 (12 - 68) 40 (12 - 68) 63 (16 - 88)

HeatingRated capacity (min. ~ max.) kW 2.65 (1.20 - 3.00) 3.70 (1.50 - 3.70) 5.00 (2.25 - 5.80)

Nominal rating W 40 40 63

Airflow (Turbo / High / Medium / Low / Silence) m³/h 550 / 500 / 450 / 405 / 315 550 / 500 / 450 / 405 / 315 900 / 818 / 740 / 666 / 550

Sound pressure (Turbo / High / Medium / Low / Silence) dB(A) 42 / 37 / 33 / 27 / 24 42 / 37 / 33 / 27 / 24 48 / 43 / 38 / 32 / 26

Sound power (High) dB(A) 51 53 56

Remote control L Series L Series L Series

Connection pipes

Liquid mm (inch) Ø6,35 (1/4") Ø6,35 (1/4") Ø6,35 (1/4")

Gas mm (inch) Ø9,52 (3/8") Ø9,52 (3/8") Ø12,7 (1/2")

Dimensions (W x H x D) mm 750 x 285 x 200 750 x 285 x 200 900 x 310 x 225

Weight kg 8 8 12

Warning: 1. Data and specifications are subject to changes without previous notice.2. The values of noise level match with values obtained in the semi-anechoic chamber.3. The capacity values will vary depending on the selected outdoor unit.

WIFI MODULE

Model Code

AMW-09-FHCL 93 392

AMW-12-FH

AMW-18-FH CL 93 390

Anti-Fungus FunctionThis function helps prevent mold and bacteria in the indoor unit. If the function is active, the equipment will activate Anti-Mold prevention after running in refrigeration and dehumidification.

Emergency switchPossibility of unit operation with the manual button in case of activation of some alarms.

Auto diagnosisWhen a problem occurs, the unit displays the erroror protection code on the indoor unit.

iFEELThe wireless remote control incorporates a temperature sensor. In this way you get a better control and comfortof the room temperature.

TurboThis function allows you to reduce the cooling / heating time to the maximum.


Spot SwingThis function allows the horizontal sliding to oscillate automatically, if you want to fix it in a certain position press again the button that activates this function.

Auto-RestartThe machine automatically recovers the settings priorto power failure.

Super quiet designThe equipment has been designed and optimized with the aim of minimizing noise from the noisiest components.

TimerThe equipment can be started or stopped in 24-hourdaily periods.

iCleanThis function performs a self cleaning on the indoor unit. When the “iClean” function is activated, the unit initially operates in cooling mode with the fan at low speed, during this period the condensation water drags the dust from the battery. The unit then switches to heating mode with the fan at low speed, to dry the battery and the inside of the unit. Finally the unit switches to ventilation mode to finish drying completely.

Cold air protectionIn heating, the initial fan speed is adjusted according to the temperature of the battery.

SilenceThis function allows you to select the ultra-quiet speed,so the sound level of the equipment is very low.





Multisplit Inverter AM Selection

STEP 1Select the power that best suited to each of the rooms to be air-conditioned. The following table shows the different powers so you can select the most suitable model for your needs.

Model 9 12 18

Capacity 2.55 kW 3.6 kW 5.2 kW

AMW-09-FH

CL 80 110

AMW-12-FH

CL 80 111

AMW-18-FH

CL 80 112


2x1 3x1

AM2-H18/4DR1 AM3-H27/4DR1

CL 80 100 CL 80 101

1ROOM

9 9

12 12

– 18

2ROOMS

9+9 9+9

9+12 9+12

12+12 9+18

– 12+12

– 12+18

3ROOMS

– 9+9+9

– 9+9+12

– 9+12+12

WALL SPLIT



311

WALL INVERTER SPLIT C Series «R410A»


¤Cooling Heating

CL 29 026 Split set TXB25C 2,500 2,800 599.00CL 29 027 Split set TXB35C 3,300 3,500 649.00CL 29 028 Split set TXB50C 5,480 5,620 1,225.00CL 29 029 Split set TXB60C 6,230 6,400 1,570.00

WALL INVERTER SPLIT KN Series «R410A»Code Model

Capacity (W)¤

Cooling Heating

CL 29 470 Split set TX25KN 2,500 2,800 645.00CL 29 471 Split set TX35KN 3,300 3,500 695.00CL 29 028 Split set TXB50C 5,480 5,620 1,225.00CL 29 029 Split set TXB60C 6,230 6,400 1,570.00

WALL INVERTER SPLIT KV WITH SERIES «R410A»Code Model

Capacity (W)¤

Cooling Heating

CL 29 417 Split set TX20KV 2,000 2,500 735.00CL 29 418 Split set TX25KV 2,500 3,000 775.00CL 29 419 Split set TX35KV 3,500 4,000 875.00CL 29 422 Split set TXS71KV 7,100 8,200 3,089.00

WALL INVERTER SPLIT EMURA II Series «R410A»Code Model

Capacity (W)¤

Cooling Heating

CL 29 011 Split set TXG20LW 2,300 2,500 1,439.00CL 29 010 Split set TXG20LS 2,300 2,500 1,580.00CL 29 013 Split set TXG25LW 2,400 3,400 1,469.00CL 29 012 Split set TXG25LS 2,400 3,400 1,620.00CL 29 015 Split set TXG35LW 3,500 4,000 1,666.00CL 29 014 Split set TXG35LS 3,500 4,000 1,828.00CL 29 017 Split set TXG50LW 5,000 5,800 2,580.00CL 29 016 Split set TXG50LS 5,000 5,800 2,830.00

INVERTER WALL SPLIT M Series «R32»Code Model

Capacity (W)¤

Cooling Heating

CL 29 410 Split set TXM20M 2,000 2,500 985.00CL 29 411 Split set TXM25M 2,500 2,800 1,015.00CL 29 412 Split set TXM35M 3,500 4,000 1,079.00CL 29 413 Split set TXM42M 4,200 5,400 1,435.00CL 29 414 Split set TXM50M 5,000 5,800 2,230.00CL 29 415 Split set TXM60M 6,000 7,000 2,609.00CL 29 416 Split set TXM71M 7,100 8,200 3,325.00

INVERTER WALL SPLIT URURU-SARARA Series «R32»Code Model

Capacity (W)¤

Cooling Heating

CL 29 030 Split set TXZ25N 2,500 3,600 1,845.00CL 29 031 Split set TXZ35N 3,500 5,000 2,180.00CL 29 032 Split set TXZ50N 5,000 6,300 3,340.00



INVERTER WALL SPLIT EMURA II Series«R32»


¤Cooling Heating

CL 29 401 Split set TXJ20MW 2,300 2,500 1,468.00CL 29 402 Split set TXJ20MS 2,300 2,500 1,612.00CL 29 403 Split set TXJ25MW 2,400 3,200 1,498.00CL 29 404 Split set TXJ25MS 2,400 3,200 1,652.00CL 29 405 Split set TXJ35MW 3,500 4,000 1,699.00CL 29 406 Split set TXJ35MS 3,500 4,000 1,865.00CL 29 407 Split set TXJ50MW 4,800 5,800 2,632.00CL 29 408 Split set TXJ50MS 4,800 5,800 2,887.00

MULTI-SPLIT INVERTER «R410A»


¤Cooling Heating

UE 29 101 Outdoor unit 2MXS40H 2x1 4,000 1,050 989.00UE 29 102 Outdoor unit 2MXS50H 2x1 5,100 1,250 1,120.00UE 29 103 Outdoor unit 3MXS40K 3x1 4,000 810 1,395.00UE 29 104 Outdoor unit 3MXS52E 3x1 5,200 1,230 1,615.00UE 29 105 Outdoor unit 4MXS68F 4x1 6,800 1,670 3,050.00UE 29 106 Outdoor unit 4MXS80E 4x1 8,000 2,220 3,685.00UE 29 107 Outdoor unit 5MXS90E 5x1 9,000 2,460 4,499.00UI 29 007 Indoor unit CTXS15K 2,500 2,800 380.00UI 29 220 Indoor unit FTXS20K 2,500 2,800 385.00UI 29 221 Indoor unit FTXS25K 2,600 2,800 388.00UI 29 008 Indoor unit CTXS35K 2,700 2,900 390.00UI 29 222 Indoor unit FTXS35K 2,900 2,900 390.00UI 29 223 Indoor unit FTXS42K 3,300 3,300 597.00UI 29 224 Indoor unit FTXS50K 3,400 3,400 937.00UI 29 225 Indoor unit FTXS60G 3,600 3,500 1,239.00

SKY AIR LOW SILHOUETTE INVERTER DUCT C Series «R410A»


¤Cooling Heating

CL 29 472 Duct system set ADEQS35C 3,400 4,000 1,207.00CL 29 473 Duct system set ADEQS50C 5,000 5,500 1,744.00CL 29 474 Duct system set ADEQS60C 5,700 7,000 1,788.00CL 29 475 Duct system set ADEQS71C 6,800 7,500 1,799.00CL 29 476 Duct system set ADEQS100C 9,500 10,800 3,046.00CL 29 477 Duct system set ADEQS125C 12,100 13,500 3,596.00

CASSETTE INVERTER SKY AIR «R410A»


¤Cooling Heating

CL 29 478 Cassette Set ACQS71F 6,800 7,500 2,300.00CL 29 479 Cassette Set ACQS100F 9,500 10,800 2,761.00CL 29 480 Cassette Set ACQS125F 12,100 13,500 3,314.00CL 29 481 Cassette Set ACQS140F 13,100 15,500 4,158.00



313

AIR CURTAINSMU-ECO Series

- Metallic casing.

- Various sizes, from 90 to 150 cm- Microprocessor control.- Remote control (see model).- High speed.

MU-ECO ModelONLY AIR

REMOTE CONTROLWITH HEATING

ELECTRICAL SINGLE PHASEWITH HEATING

ELECTRICAL THREE PHASE

09 12 15 09/6R 12/8R 15/8R 09/6R3 12/8R3 15/8R3

Air flow rate m³/h 1,020 1,360 1,700 912 1,280 1,670 912 1,280 1,670

Heating power kW — 6 7.2 9 6 7.2 9

Voltage V-Hz-Ph 220 - 50 - I 220 - 50 - I 380 - 50 - III

Speeds Nº 3 2 2

Applicable height m 3 3 3

Fan power consumption W 186/238/322 218/285/419 291/381/536 96/156 126/178 154/207 96/156 126/178 154/207

Power consumption in heating

W — 6,120 7,380 9,250 6,120 7,380 9,250

Control Remote Remote and manual Remote and manual

Sound level dB(A) 53 54 56 55 57 59 55 57 59

Height mm 230 230 230 221 221 221 221 221 221

Long mm 900 1,200 1,500 900 1,200 1,500 900 1,200 1,500

Depth mm 212 212 212 183 183 183 183 183 183

Net weight kg 15 20 23.5 15.5 19.5 23.5 15.5 19.5 23.5

Code EC 06 480 EC 06 481 EC 06 482 EC 06 483 EC 06 484 EC 06 485 EC 06 486 EC 06 487 EC 06 488

Price ¤ 260.00 295.00 380.00 415.00 492.00 580.00 415.00 492.00 580.00

Keeping the doors open involves a huge waste of energy in most buildings. Proper installation of an air curtain can reduce energy loss through open doors by 90%. In addition to the significant energy savings, air curtains improve the healthiness of the environment and allow you to keep the doors open even during winter, which allows the entry of customers in stores. The air curtains have an operating slogan: “A warm welcome...”

ModelsONLY AIR

ModelsHEATING

Mod. Only air

Mode with heating



CENTRIFUGAL INDUSTRIALAIR CURTAINMU-ECO GC Series

- Centrifugal type fan.- High efficiency design.- High air flow.- High static pressure.- Metal housing, fire resistant.- Maximum installation height: 6 m- Easy installation.- Power supply: 220V-50HZ-1 Ph.

Model MU-ECO 10 GC MU-ECO 12 GC MU-ECO 15 GC

Air flow rate m³/h 3,709 3,709 3,563

Motor power kW 1.5 1.5 2.25

Absorbed current A 9.44 9.44 14.42

Air speed m/s 30 30 30

Sound level dB(A) 72 72 72

Height mm 287 287 287

Long mm 1,000 1,200 1,500

Depth mm 297 297 297

Code EC 06 420 EC 06 424 EC 06 425

Price ¤ 620.00 685.00 1,100.00

Double shaft motor. Metallic fan. Metal fan housing.

Centrifugal fanof high capacity.

Metallic casing. Max recommended height 6 m.



315

AIR CURTAINSSILVER Model

- Innovative design without visible hardware- Aluminium and ABS.- Remote control and control panel.- Operation indicator

Easy to open, practical design that uses no screws on the outside deck.The stainless housing is made of high strength aluminum and high quality ABS.With unique guide bar design, which enables the production of air in all directions, being able to adapt to different environments.It can be controlled by the remote controland control panel. It has a switch for high and low speed.Provided with an optimized electric machinery,it works safely and effectively.

Model MU-ALU 09 MU-ALU 12 MU-ALU 15 MU-ALU 18 MU-ALU 20

Code EC 06 475 EC 06 476 EC 06 477 EC 06 478 EC 06 479

Air flow rate H (high) m³/h 1,100 1,500 1,900 2,280 2,520

L (low) m³/h 900 1,200 1,500 1,800 2,100

Speeds Nº 2 2 2 2 2

Remote control YES YES YES YES YES

Manual control YES YES YES YES YES

Consumption H (high) W 230 290 380 450 470

L (low) W 200 260 350 420 440

Voltage V-Hz-Ph 220-50-1 220-50-1 220-50-1 220-50-1 220-50-1

Sound levelH (high) dB(A) 52 53 55 57 58

L (low) dB(A) 49 50 52 55 56

Net weight kg 13 15.5 20 23.5 27

Dimensions

Long mm 900 1200 1500 1800 2000

Height mm 230 230 230 230 230

Depth mm 215 215 215 215 215

Price ¤ 322.00 370.00 500.00 600.00 650.00

Fine metal blades provide a better control of the airflow.

Integrated design with metal side cover.

Buttons with light indicator High performance,high efficiency.



AIR CURTAINSINOX Model

- Stainless steel housing.- Special design.- Manual controller.- Two speeds.- Ideal for saline environments.

The outer casing made of stainless steel is easy to clean and offers a high resistance against fire.

With unique guide bar design, which enables the production of air in all directions, being able to adapt to different environments.

It has a switch for high and low speed.

Provided with an optimized electric machinery, it works safely and effectively.

Model MU-IN 12 MU-IN 15 MU-IN 18

Code EC 06 472 EC 06 473 EC 06 474

Air flow rate H (high) m³/h 1,500 1,900 2,280

Air flow rate L (low) m³/h 1,200 1,500 1,800

SpeedH (high) m/s 16 16 16

L (low) m/s 13 13 13

Remote control NO NO NO

Manual control YES YES YES

Consumption H (high) W 290 380 450

L (low) W 260 350 420

Voltage V-Hz-Ph 220-50-1 220-50-1 220-50-1

Sound levelH (high) dB(A) 53 55 57

L (low) dB(A) 50 52 55

Net weight kg 18.5 25 30

Dimensions

Long mm 1200 1500 1800

Height mm 241 241 241

Depth mm 215 215 215

Price ¤ 530.00 675.00 820.00

*Max recommended installation height: 3.5 meters

High performance,high efficiency.



317

AIR CURTAINSMU-CA Series

Code Model Length (mm) kW/h ¤

CURTAINS ONLY AIR

EC 06 381EC 06 382EC 06 363

MU-CA 100ANMU-CA 150ANMU-CA 200AN

1,0801,6862,186

–––

400.00597.00796.00

CURTAINS WITH ELECTRIC BATTERY

EC 06 383EC 06 384EC 06 386EC 06 385EC 06 387EC 06 388

MU-CA 100RN 3.5MU-CA 100RN 6MU-CA 100RN 9MU-CA 150RN 9MU-CA 150RN 12MU-CA 200RN 18

1,0801,0801,0801,6861,6862,186

3.5699

1218

513.00722.00851.00

1,090.001,323.001,473.00

CURTAINS WITH WATER BATTERY

EC 06 400EC 06 401EC 06 402

MU-CA 100-W9MU-CA 150-W15MU-CA 200-W24

1,0801,6862,186

91524

961.001,217.001,692.00

TECHNICAL FEATURES

Model MU-CA 100AN 150AN 200AN 100RN3,5 100RN6 100RN9 150RN9 150RN12 200RN18 100-W9 150-W15 200-W24

Code EC 06 381 382 363 383 384 386 385 387 388 400 401 402

Power supply V 230V II 230V II 230V II 230V II 400V III 400V III 400V III 400V III 400V III 230V II 230V II 230V II

Heating power kW – – – 3.5 3/6 4.5/9 4.5/9 6/12 9/18 9 15 24

Speeds 2 2 2 3 3 3 3 3 3 3 3 3

Air flow rate m³/h 1,420 2,675 2,744 1,384 1,384 1,295 2,545 2,500 2,600 1,623 2,812 2,890

Air outlet speed m/s 10.5 10.5 8.79 10 10 10 10 10 10 11 11 8.1

Sound level dB(A) 48 50 49 48 48 48 50 49 49 48 50 48.6

Absorbed intensity A 0.5 0.8 0.63 15.5 8.6 13 13 17.3 26 0.5 0.8 0.7

Thermal jump ∆T – – – 9/11/18 14/18/26 20/25/30 13/15/25 18/20/30 20/25/30 20-25-29 20-25-29 23-28-32

Outdoor control (wall) Included Included Included Included Included Included Included Included Included Included Included Included

Weight kg 15.2 20 26 15.8 15.8 15.8 20.8 22 20.8 19 25 33

White color RAL 9003 9003 9003 9003 9003 9003 9003 9003 9003 9003 9003 9003

Length mm 1,080 1,686 2,186 1,080 1,080 1,080 1,686 1,686 2,186 1,080 1,686 2,186

Air speed

Series 100 Series 150 Series 200



INDUSTRIAL CURTAINSMU-CA Series

- For 4 - 8 m doors- Horizontal installation

Code Model A.M.R.m

Lengthmm kW/h ¤

CURTAINS ONLY AIR

EC 06 390EC 06 391

MU-CA 1000FMU-CA 1500F

88

1,3901,970

——

2,356.003,099.00


EC 06 392EC 06 393EC 06 394EC 06 395

MU-CA 1000E18MU-CA 1000E24MU-CA 1500E24MU-CA 1500E36

8888

1,3901,3901,9701,970

18242436

3,437.003,547.004,296.004,308.00


EC 06 396EC 06 397

MU-CA 1000W33MU-CA 1500W50

88

1,3901,970

3554

2,422.003,217.00

ACCESSORIES

EC 06 398EC 06 399

• Dimensions: 120 x 50 x 57MU-CR-20 Controller, models only air and water batteryMU-CR-30 Controller, models with electric batteryNote: A single command can control up to 5 curtains.

62.0065.00

TECHNICAL FEATURES

Model MU-CA 1000F 1500F 1000E18 1000E24 1500E24 1500E36 1000W33 1000W50

Code EC 06 390 EC 06 391 EC 06 392 EC 06 393 EC 06 394 EC 06 395 EC 06 396 EC 06 397

Power supply V 230 230 400+N 400+N 400+N 400+N 230 230

Heating power kW – – 9/18 12/24 12/24 18/36 33 33

Thermal jump DT – – 5/7/11/13 7/9/14/17 5/6/10/11 7/8/15/17 20/33 20/33

Speeds Nº 2 2 2 2 2 2 2 2

Air flow rate m³/h 4100/5200 6700/8300 4100/5000 4100/5000 6500/7500 6500/7500 4100/5200 6500/7500

Output speed m/s 20 20 20 20 20 20 16 16

Max. current consump. A 3 5 27 36 36.5 54 3 5

Controller Optional Optional Optional Optional Optional Optional Optional Optional

Sound level dB(A) 62 70 62 62 70 70 62 70

Weight kg 40 50 45 45 55 55 40 50

INSTALLATION

HEIGHT

up to

8 m

1000 Series

ControlMU-CR 20-30

Installation height

Distance/air speed



319

AIR CURTAINSAC Model

- Horizontal installation- Innovative design.- Steerable discharge grille- White finish RAL 9010.

Code Model A.M.R.m

Lengthmm kW/h ¤

AIR CURTAINS ONLY

EC 06 443EC 06 444EC 06 445

AC1000 SHAWAC1500 SHAWAC2000 SHAW

444

1,1381,6382,138

———

1,312.001,820.002,291.00


EC 06 446EC 06 447EC 06 448

AC1000HE9AC1500HE12AC2000HE18

444

1,1381,6382,138

91218

1,372.001,882.002,253.00


EC 06 449EC 06 450EC 06 451

AC1000HW12AC1500HW18AC2000HW24

444

1,1381,6382,138

121824

1,913.002,733.003,218.00

TECHNICAL FEATURES

ModelONLY AIR WITH ELECTRIC BATTERY WITH WATER BATTERY

AC1000HA AC1500HA AC2000HA AC1000HE9 AC1500HE12 AC2000HE18 AC1000HW12 AC5000HW18 AC2000HW24

Code EC 06 443 EC 06 444 EC 06 445 EC 06 446 EC 06 447 EC 06 448 EC 06 449 EC 06 450 EC 06 451

Power supply V 230 230 230 400 400 400 230 230 230

Heating power kW – – – 9 12 18 12 18 24

Thermal jump ∆T – – – 25/35 26/33 23/29 26/33 23/29 20/27

Speeds Nº 2 2 2 2 2 2 2 2 2

Air flow rate m³/h 1850/2300 2400/3300 4100/5000 1850/2300 2400/3300 4100/5000 1850/2300 2400/3300 4100/5000

Output Speed m/s 8.5/11 8.5/11 8.5/11 8.5/11 8.5/11 8.5/11 6.4/9.4 6.4/9.4 6.4/9.4

Current A 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5

Controller Included Included Included Included Included Included Included Included Included

Sound level dB(A) 55/60 55/60 55/60 55/60 55/60 55/60 55/60 55/60 55/60

Weight kg 39.5 49 60 39.5 49 60 39.5 49 60

High / Bottom mm 395/350 395/350 395/350 395/350 395/350 395/350 395/350 395/350 395/350

Length mm 1138 1638 2138 1138 1638 2138 1138 1638 2138

Color RAL 9010 RAL 9010 RAL 9010 RAL 9010 RAL 9010 RAL 9010 RAL 9010 RAL 9010 RAL 9010



AIR CURTAIN TO BUILD-IN(without heating)MU-EMP

- Specially designed forceiling installation.

- Metallic casing.- 3-speed motor.- Remote control.- Installation height: 3.5 m

Code Model Recom. max. heightm

Lengthmm ¤

AIR CURTAINS ONLY

EC 06 467EC 06 468EC 06 469

MU-EMP 09MU-EMP 12MU-EMP 15

3.53.53.5

90012001500

643.50737.00973.50

TECHNICAL FEATURES

Model MU-EMP 09 MU-EMP 12 MU-EMP 15

Code EC 06 467 EC 06 468 EC 06 469

Unit length mm 900 1200 1500

Power supply V/Ph/Hz 220-240/1/50 220-240/1/50 220-240/1/50

Motor powerH (high)M (medium)L (low)

WWW

295217175

360272235

455333272

Air outlet speedH (high)M (medium)L (low)

m/sm/sm/s

1512.510

1512.510

1512.510

Air flow rate H (high) m³/h 1020 1360 1700

Sound level H (hight)L (low)

dB(A)dB(A)

5351

5452

5654

Gross weight kg 17.2 21.8 29.1

1. Available with nominal tension and personalized frequency2. The pressure level is heard at 1m distance under the air outlet.3. Standard units are equipped with European plugs.4. Customized plugs available.

Remote control

Model A B

MU-EMP 09 930 900

MU-EMP 12 1230 1200

MU-EMP 15 1530 1500

INLETAIR

OUTLETAIR



321

CURTAIN TO BUILD INMU-CA FT Series

- To install up to 3 m height.- High performance tangential impeller

and low sound level.- Possibility of installation in series.- The grille is not included with the

product. Must be ordered separately.

CURTAIN DIMENSIONS

TECHNICAL FEATURES

Model COR F-1000 FT COR F-1500 FT COR-6-1000 FT COR-9-1000 FT COR-9-1500 FT COR-12-1500 FT

Code EC 06 370 EC 06 371 EC 06 372 EC 06 373 EC 06 374 EC 06 375

Power supply V 230 230 3N 400 3N 400 3N 400 3N 400

Motor power W 128 164 128 128 166 166

Speeds Nº 2 2 3 3 3 3

Current A 0.4 0.4 13 15.1 22.7 33.9

Air flow rate Fast speedMedium speedSlow speed

m³/hm³/hm³/h

1,700–

1,300

2,600–

2,300

1,6001,3001,000

1,6001,3001,000

2,4002,1001,700

2,4002,1001,700

Air outlet speed to 0.05 m m/s 10.70 10.10 10.06 10.06 11.76 17

Heating power Max.Min.

kWkW

––

––

63

94.5

94.5

126

∆T max.Max. power

Fast speedSlow speed

°C°C

––

––

16.7020.80

2529.5

15.6720.72

2126.5

∆T max.Max. power

Fast speedSlow speed

°C°C

––

––

9.8011.90

1819

8.1312.15

1518

Sound pressure level dB(A) 59 61 59.5 59.5 61.5 61.5

Power absorbed A 0.55 0.71 8.6 13 13 17.3

Thermal fuse – – • • • •

Cold / hot air F F F/C F/C F/C F/C

Weight kg 20 30 24 24 35 35

Speed selector included CR-F CR-F CR-6/9 N CR-6/9 N CR-6/9 N CR-6/9 N

Price ¤ 843.00 1,134.00 1,166.00 1,308.00 1,602.00 1,830.00

WHITE GRILLE Code RE 21 115 RE 21 116 RE 21 115 RE 21 115 RE 21 116 RE 21 116

Price ¤ 150.00 210.19 150.00 150.00 210.19 210.19

Installation heightDistance/air speed

Model Dimensions (mm)

1000 H: 204 B: 390 C: 1,087

1500 H: 204 B: 390 C: 1,694

Lateral detail(mm)

2 m wide installations2 units COR-1000 FT or COR-1000 FTW+ 1 FT-2000 GRILL



CURTAIN TO BUILD INACR Series

- Suspended ceiling assembly.- White finish RAL9010.

Code Model A.M.R.m

Lengthmm kW/h ¤

AIR CURTAINS ONLY

EC 06 452EC 06 453EC 06 454EC 06 455EC 06 456

ACR100SAACR150SAACR200SAACR120HAACR180HA

33344

1,2421,5422,0591,2101,810

–––––

1,639.002,411.002,794.001,940.002,794.00


EC 06 457EC 06 458EC 06 459EC 06 460EC 06 461

ACR100SE9ACR150SE12ACR200SE18ACR120HE12ACR180HE18

33344

1,2421,5422,0591,2101,810

912181218

1,794.002,601.003,079.002,121.003,077.00

TECHNICAL FEATURES

Model ACR100SA

ACR150SA

ACR200SA

ACR120HA

ACR180HA

ACR100SE9

ACR150SE12

ACR200SE18

ACR120HE12

ACR180HE18

Code EC 06 452 EC 06 453 EC 06 454 EC 06 455 EC 06 456 EC 06 457 EC 06 458 EC 06 459 EC 06 460 EC 06 461

Power supply V 230 230 230 230 230 400 400 400 400 400

Heat power kW – – – – – 4.5/9 6/12 9/18 6/12 9/18

Thermal jump ∆T – – – – – 20/26 19/25 19/21 23/29 20/27

Speeds Nº 3 3 3 3 3 3 3 3 3 3

Air flow rate m³/h 1164/1646

1475/2085

2013/2851

1300/2300

1600/3300

1164/1646

1475/2085

2013/2851

1300/2300

1600/3300

Output speed m/s 4.3/7 4.3/7 5.4/8.4 8.5/11 8.5/11 4.3/7 4.3/7 5.4/8.4 8.5/11 8.5/11

Current A 3 3 3 5 5 14.2 18.2 27.2 29.5 38.4

Controller Included Included Included Included Included Included Included Included Included Included

Sound level dB(A) 59/64 59.64 62/66 55/60 55/60 59/64 59/64 62/66 55/60 55/60

Weight kg 26 32 47 36 53 28 34 49 38 55

High / Bottom mm 200/454 200/454 200/454 221/608 221/608 200/454 200/454 200/454 221/608 221/608

Air speed



323

HEAT RECOVERY UNITSMU-RECO-SN Series“Configurable”

Supplied with loose filters so that the installer can configure your application.

Heat recovery unit

Code Model Flow ratem³/h ¤

CL 41 781 MU-RECO 500 SN 500 1,084.00CL 41 782 MU-RECO 900 SN 900 1,218.00CL 41 783 MU-RECO 1200 SN 1,200 1,657.00CL 41 784 MU-RECO 1900 SN 1,900 1,774.00CL 41 785 MU-RECO 2400 SN 2,400 2,228.00CL 41 786 MU-RECO 3300 SN 3,300 2,467.00CL 41 787 MU-RECO 4400 SN 4,400 2,857.00CL 41 788 MU-RECO 5200 SN 5,200 3,649.00

*The air flow rate changes depending on the position of the filters.

Filter G4

Code Model ¤LC 41 700LC 41 701LC 41 702LC 41 703LC 41 704LC 41 705LC 41 706LC 41 707

F 500 G4F 900 G4F 1200 G4F 1900 G4F 2400 G4F 3300 G4F 4400 G4F 5200 G4

18.0018.0025.0029.0034.0042.0049.0055.00

Filter F6


F 500 F6F 900 F6F 1200 F6F 1900 F6F 2400 F6F 3300 F6F 4400 F6F 5200 F6

28.0042.0055.0060.0071.0094.00

125.00165.00

Filter F7



31.0047.0066.0079.0096.00

127.00155.00171.00

Filter M5


F 500 M5F 900 M5F 1200 M5F 1900 M5F 2400 M5F 3300 M5F 4400 M5F 5200 M5

23.0033.0048.0054.0065.0086.00

100.00125.00

Filter F8



29.0047.0070.0079.0095.00

127.00135.00175.00

Filter F9



32.0049.0076.0084.0098.00

130.00152.00196.00

Heat recovery unitSuction1 filter

Discharge1 or 2 filters

or

or

or

+ITS FILTER

COMPOSITION



HEAT RECOVERY UNIT WITH EXCHANGER OF CROSS FLOWSMU-RECO SN Series

Heat recovery units without additional heating contribution.Motors: IP44, F Class (500, 800, 4400 and 5200 models) IP20, F Class (1200, 1900, 2400 and 3300 models)

- Single phase and three-phase models.

- Flow rate from 500 to 5,200 m3/h.

- Horizontal installation.

- Side panel exchangers allowing multiple combinations.

Features:

- Heat recovery with cross-flow exchanger mounted in boxes of galvanized steel, with internal thermal acoustic insulation made of 6 mm thick polyethylene foam (M1), configurable inlet and outlet openings with seal.

- Available with different filtration levels (G4, M5, and low load loss micro-filters F6, F7, F8 and F9 , made of polypropylene). Provided with filter holders that allow mounting of one or two filters in both air directions.

VERSATILE ASSEMBLY

The design of this heat recovery units allows the user to set them up on site.

There are several combinations of panel exchange. This allows to place, in a great number of cases, the impulsion / suction connections directly to the installation area according to the specific requirements.

EASY SERVICE

Quick access to filters from top, bottom and side part.

STANDARD CONFIGURATION

Various layouts can me made very quickly and easily by the professional installer.

ROBUSTNESS

High quality finishings. Aluminium framework providing high robustness.

HIGH-EFFICIENCY FILTERS

Combine up to two filters in each direction of the air. Conventional filters G4 and M5. F7 and F9 filters very low load loss, made of polypropylene.

CONDENSATE WATER DRAINAGE

Drain pipe that allows condensate water outlet.

EASY ASSEMBLY

Single phase models with brackets for mounting on suspended ceiling.Three-phase models with feetfor floor mounting.

SEALED EXTERNAL TERMINAL BOX

Except for 500 and 900 models. Single phase models with external sealed box of terminals, IP65.

SEALED BOX

Rubber sealed joints in the tap cover and in the suction/discharge flanges providing a tight sealing.

HORIZONTALSStandard versions

Conf. CH Model



325

TECHNICAL FEATURES

Code ModelMotorPower

kW

Intensity max. current consump. 50Hz (A) Speed

r.p.m. IP

ProtectionEfficiency

%*

Sound pressure at 3 mdB (A)**

230V 230/400V Suction Discharge Distribution

CL 41 781 MU-RECO 500 SN 2 x 0.29 2 x 1.32 – 2880 IP44 52 42 55 41

CL 41 782 MU-RECO 900 SN 2 x 0.30 2 x 1.38 – 2880 IP44 55 42 55 41

CL 41 783 MU-RECO 1200 SN 2 x 0.373 2 x 2.75 – 1357 IP20 54 54 66 52

CL 41 784 MU-RECO 1900 SN 2 x 0.373 2 x 2.75 – 1357 IP20 49 54 66.5 52.5

CL 41 785 MU-RECO 2400 SN 2 x 0.55 2 x 4.44 – 1324 IP20 50 55 67 53

CL 41 786 MU-RECO 3300 SN 2 x 0.55 2 x 4.44 – 1251 IP20 50 55 67.5 53

CL 41 787 MU-RECO 4400 SN 2 x 1.5 to select 2 x 10.1/5.8 1462 IP44 50 57 70 56

CL 41 788 MU-RECO 5200 SN 2 x 1.5 to select 2 x 10.1/5.8 1462 IP44 52 58 71 57

* Values for the following conditions: Outdoor air temperature of -5 °C, indoor air temperature +20 °C, with 80% inside RH / at 70% max. flow rate.** Average sound pressure in free field environment.

TYPICAL MAXIMUM SPEED CURVES:

- qv = flow rate in m³/h. Additional load losses.- Psf = Static pressure in Pa. Resistance: 10 Pa (all models).- P(W) = Absorbed power at the maximum speed (W). Water batteries 45Pa.- Normal dry air at 20 °C and 760 mmHg mercury column. - In accordance with ISO 5801 and AMCA 210-99 norms.

DIMENSIONS (mm)

Code Model A B C D E Ø Weight (Kg)

CL 41 781 MU-RECO 500 650 650 360 180 178 200 46

CL 41 782 MU-RECO 900 850 850 360 180 228 250 65

CL 41 783 MU-RECO 1200 1050 1050 500 250 278 315 113

CL 41 784 MU-RECO 1900 1150 1150 500 250 303 355 123

CL 41 785 MU-RECO 2400 1300 1300 530 265 340 355 154

CL 41 786 MU-RECO 3300 1500 1500 530 265 390 400 190

CL 41 787 MU-RECO 4400 1600 1600 700 300 415 450 215

CL 41 788 MU-RECO 5200 2000 2000 750 325 515 500 400

MU-RECO 500 SN

MU-RECO 2400 SN

MU-RECO 900 SN

MU-RECO 3300 SN

MU-RECO 1200 SN

MU-RECO 4400 SN

MU-RECO 1900 SN

MU-RECO 5200 SN



DEHUMIDIFIERMH Series

MH-10-V5 / MH-20-V5- Electronic control- Adjust air flow (3 speeds).- ON/OFF Timer.- Humidity level adjustment between 35-80%.- LED Display- Possibility to connect to continuous drain.- Water level viewer.- Incorporates wheels for easy transport.- Temperature range Operating temperature 5-35 °C.- Memory function / auto-ignition.- Anti-overflow protection.- Automatic defrost.- Tank with 4 L capacity.

MH-40-V5- Electronic control- Memory function / auto power on.- ON/OFF Timer.- Anti-overflow protection.- Water level viewer.- Automatic defrost.- LED Display- Incorporates wheels for easy transport.- Possibility to connect to continuous drain.- Tank with 6 L capacity.

MH-60-N / MH-80-N- Modern and elegant design.- High dehumidification capacity.- High efficiency rotary compressor.- Electromechanical controller- Possibility to connect to continuous drain.- Incorporates wheels for easy transport.- Tank with 7.2 L capacity

Model MH-10-V5 MH-20-V5 MH-40-V5 MH-60-N MH-80-N

Code HU 10 530 HU 10 531 HU 10 504 HU 10 509 HU 10 511

Power supply V - Hz 230 - 50 230 - 50 230 - 50 230 - 50 230 - 50

Absorbed power W 330 480 560 1,150 1,350

Dehumidification liters/day* 10 20 40 60 80

Air flow (High/Medium/Low) m³/h 150 / 120 / 100 180 / 160 / 140 345 / – / 320 400 / – / – 400 / – / –

WidthDimensions Height Deep

mmmmmm

343525262

343525262

392616282

481628286

481628286

Weight kg 13 15.5 18.1 22.5 23

Refrigerant R 134a R 134a R 410a R 410a R 410a

Price ¤ 211.00 296.00 401.00 676.00 751.00

*30 °C / 80% RH.

MH-10-V5 / MH-20-V5

MH-40-V5

MH-60-N / MH-80-N



327

PORTABLE EVAPORATIVEAIR CONDITIONERMUEV-ECO Series

OPERATION

The evaporative cooling is one of the most efficient methods to save energy and cool a room. Your power consumption is less than the alternatives.

The hot air is pushed to pass through an high efficiency and long lasting antigerm fabric, through this fabric circulate water in a close circuit. The outside temperature is reduced by the evaporative process, and so is the cooling air process.


Model MUEV-2000-ECO

Code CE 04 206Voltage AC220 240V/50HzConsumption in cooling 70 WConsumption in heating 1000/2000WElectric protection Type IIAir volume 350 m³/hNet weight 6.5 kgTank capacity 8 LDimensions (LxWxH) 370 x 320 x 735Price 105.00 ¤

MUEV-C7 Series


Model MUEV-1500-C7

Code HU 01 207Power supply V / Hz 230 / 50Air Flow (High / Medium / Low) m³/h 1500 / 1200 / 900Consumption W 108Sound level dB(A) 58Water tank volume (liters) L 11.5Continuous use timewith full tank

hours 7.5 ~ 10

Cooling pads Units 4Recommended surface m² 17Dimensions (W x H x D) mm 360 x 798 x 360Weight kg 8.5Price 180.00 ¤

Warning: Data and specifications are subject to changes without previous notice.

Refreshes

Humidifies

Heats

Purifies4 FUNTIONS

NEW

- Remote control and control panel.- Water curtain system free of germs.- Antibacterial tank (8 liters).- Two stages heating: 1000W/2000W.- Ability to add ice cubes.

- Three ventilation speeds.- Wheels for better mobility.- Low sound level.- Low consumption LED display.- 8 h Timer

- Portable evaporative air conditioner recommended to refresh rooms until 17 m².

- Ideal for dry environments.- Temperature drop from 5~15 °C

depending on the humidity levelof the air.

- Air inlet all around the unit.- Easy detachable which allows

easy cleaning and maintenance.- Includes wheels for better mobility.- Automatic blade swinging.- Remote control included.



PORTABLE EVAPORATIVEAIR CONDITIONER

Model DIET 50i

Code HU 01 211Voltage 230V-50HzPower 170WTank capacity 50 litersWeight 10.5 kgAir flow rate 1.250 m³/h Dimensions (L x W x H): 430 x 360 x 1345 mmPrice 256.00 ¤

Model SUMO

Code HU 01 205Air flow rate 3.000 m³/hCooling surface 60 m²Air range 12 mPower supply 230V-50Hz-1PhAbsorbed power 150 WSpeeds 3Tank capacity 40 litersWater level indicator YesDimensions (L x W x H): 505 x 618 x 960 mmPrice 285.00 ¤

Model WINTER i

Code HU 01 214Voltage 230V-50HzPower 185WTank capacity 56 litersWeight 12 kgAir flow rate 4.500 m³/h Dimensions (L x W x H): 630 x 445 x 1105 mmPrice 340.00 ¤

Model STORM 100

Code HU 01 210Voltage 230V-50HzPower 235WTank capacity 100 litersWeight 25 kgAir flow rate 5.500 m³/h Dimensions (L x W x H): 455 x 600 x 1665 mmPrice 520.00 ¤

- Remote control and control panel.- Water curtain system free of germs.- Antibacterial tank.- Automatic fins direction.- Ability to add ice cubes.- Three ventilation speeds.- Wheels for better mobility.- Low consumption LED display.- Anti-particle filter.- Alarm for empty tank.

Advantages of the evaporative system:- Very low electrical consumption. - Reduced water consumption due to its

circulation in a closed-loop. - It delivers 100% fresh air without

impurities.- Low sound level.- Speed control. - Easy servicing.




329

EVAPORATIVE REFRESING UNITFOR OUTDOOR

MFS5-65“Water nebulizer”

- Easily manageable.- Built-in water pump.- Adiabatic cooling.- It allows to adjust the misting level, allowing

to be used even indoors.

The MUNDOCLIMA nebulizer give a pleasant sensation of cooling thanks to the air humidification.

The achieved thermal sensation is the reduction of 2 °C to 6 °C depending on the environmental conditions.

Thanks to the air and water powerful diffusion, people and objects will never be wet.


Model MFS5-65

Code HU 01 201

Air flow rate m³/h 12600

Consumption W 230

Speed r.p.m 1400

Sound level dB(A) 55

Dehumidification capacity L/h 7

Effective distance m 7

Effective area m² 30

Tank Liters 32

Height mm 2020

Fan diameter mm 650

Price ¤ 500.00

REFRESHING

solution for:

TERRACE

TENTS



WALL HEATER

Code Model ¤CE 04 201 Wall heater ECO Series 40.10CE 04 202 Wall heater LUXUS Series 70.15

AIR PURIFIERMU-PUR 300


Model MU-PUR 300

Code KF 20 021Supply Voltage 220V-240V / 50HzConsumption 95 WDimensions (Width x Height x Depth) 396 x 576 x 245 mmWeight 10.5 KgSpeeds Mute-Low-High-TurboSound power (M-L-A-T) 28-38-48-53 dB(A)Air flow (M-L-A-T) 75-150-230-300 m³/hRecommended volume 45 m³Price 245 ¤

Economic Series MUR-ECO- Infrared remote control.- Manual control button in the unit.- Power 220 V - 50 Hz.- 2 powers selectable 1000 W -

2000 W.- Operation indicator light- Timer 0.5 to 7.5 hours.- Dimensions: 453 x 182 x 113 mm.- Fixed fins.

Luxus SeriesMUR-LUXUS- Temperature control.- Air Swing function.- Remote controller for infrared rays.- Manual controller of the unit.- Power 220 V - 50 Hz.- 2 powers selectable 1000 W -

2000 W.- Timer 0.5 to 7.5 hours.- Dimensions: 618 x 208 x 127 mm.- Steerable fins.- Temperature front digital

indication.

- Deodorizes. - Revitalizes- Prevents allergies. - Ionizes.- Sanitizes.

LATESTS TECHNOLOGYIN AIR PURITY:

COTTON PREFILTERCatch particles of coarse dust and mites, it is washable.

HEPA FILTERIt has a filtration efficiency above 99% of floating particles larger than 0.3 μm. It is mainly used in clean rooms (ORs, pharmacies, laboratories, etc.). Catch viruses and bacteria.

HIMOP FILTERComposed of polycrystalline ceramic particles, technological innovation developed to eliminate

formaldehyde. It has a catalytic capacity, it can break down and absorb hazardous substances (COV's).

GENERATOR OF NEGATIVE IONSReleases “air vitamins” in a refreshing way, which makes the ambient air to become fresh and natural (the air surrounding the forests and waterfalls is rich in negative ions).

ACTIVE CHARCOAL FILTERThe great porosity of the active carbon allows it to absorb harmful gases and unpleasant odors from the environment.

PLASMAIt releases ionic groups and eliminates a great quantity of air bacteria and tobacco smoke.

ECO Series

Luxus Series

THE INSTALLER’S BLOGAT SALVADOR ESCODA

The perfect tool for the installer, engineer, architect, builder, student, etc. To keep yourself updated about the relevant information of this professional sector to achieve technical documents, to find out about new regulations, brand new

tendencies, news, etc. Please register in our blog and we willlet you know. Would you like to know everything in the

professional channel? Do you need any technical resources? Please ask us, we will assess you.

www.elblogdelinstalador.com(also accessible in the “News” section of our web)

SUSCRIBE TO OUR NEWSLETTER

EscoNewsBe the first to know about our new products, offers, price list

updates, catalogues to download...

If you wish suscribe, please fill in our Web form:www.salvadorescoda.com/suscripcion

Salvador Escoda S.A. began its journey 43 years ago. What began as a small warehouse, is today one of the main distributors of: Air Conditioning, Heating, Refrigeration and Insulation of the Spanish market. We are a company that employs more than 500 people and provides supplies and advice to more than 25 000 customers.

A long journey that in continuous growth thanks to a very well defined identity.

• Wide product catalog.

• Distribution agreements with leading manufacturers.

• Distribution of own-brand products to which we provide a solid technical service and warranty.

• Progressive growth of our commercial network.

• Strong commitment by the foreign market.HEAD OFFICE

Provenza, 392 pl. 2 - 08025 BarcelonaTel. +34 93 446 27 81 - Fax +34 93 456 27 96

[email protected]

.

ALBACETE:Pol. Campollano calle D nº8nave 15-22 - 02007 AlbaceteTel. 967 19 21 [email protected]

ALICANTE:Av. Neptuno, 503007 AlicanteTel. 96 147 90 [email protected]

ALICANTE - Pedreguer:C/.Metal·lurgia, Pol. Les Galgues03750 PedreguerTel. 96 147 90 [email protected]

ALICANTE- Almoradí:Pol. Las MaromasC/. Holanda, 10. 03160 AlmoradíTel. 96 147 90 [email protected]

ALICANTE- Elche:Pol. Ind. de CarrúsC/. Monovar, 35 - 03206 ElcheTel. 96 147 90 [email protected]

ALMERÍA:Carrera Doctoral, 2204006 AlmeríaTel. 950 62 29 [email protected]

ASTURIAS:Benjamin Franklin, 37133211 GijónTel. 985 30 70 [email protected]

BADAJOZ:Pol. El Nevero, C/.14, n. 13.1206006 BadajozTel. 924 27 58 [email protected]

BADAJOZ - Mérida:Pol. El Prado. C/. Palencia, 19B06800 MéridaTel. 924 10 22 [email protected]

BARCELONA:Rosselló, 430-432 bjs.08025 BarcelonaTel. 93 446 20 [email protected]

BARCELONA:Viladomat, 161-16308015 BarcelonaTel. 93 707 99 [email protected]

BARCELONA - Badalona:Industria 608-61208918 BadalonaTel. 93 460 75 [email protected]

BARCELONA - Cornellà de Llob:Ctra. del Mig, 63-65 (entre Silici y Energia)08940 Cornellà de LlobregatTel. 93 377 16 [email protected]

BARCELONA - Sant Boi:Pol. Prologis Park, nave 5C/. Filats, 7-11 - 08830 St. BoiTel. 93 377 16 [email protected]

BARCELONA - Sant Boi Sta. Creu:Ctra. de Sta. Creu de Calafell, 7508830 Sant Boi de LlobregatTel. 93 707 94 [email protected]

BARCELONA - Barberà:Marconi, 2308210 Barberà del VallèsTel. 93 718 68 [email protected]

BARCELONA - Terrassa:Pol. Can Petit. Av. del Vallès,724B. 08227 TerrassaTel. 93 736 98 [email protected]

BARCELONA - Manresa:Pol. Els Dolors. C/.Sallent, 97-10308243 ManresaTel. 93 566 90 [email protected]

BARCELONA - Granollers:Pol. Palou Nord, C/. Mollet, 1808401 GranollersTel. 93 861 17 [email protected]

BARCELONA - Mataró:Carrasco i Formiguera, 29-35Pol. Ind. Plà d'en Boet. CP 08302Tel. 93 798 59 [email protected]

BARCELONA - Vilanova i la Geltrú:C/. Roser Dolcet, par. IP-01Pol. Sta. Magdalena. CP 08800Tel. 93 816 84 [email protected]

BURGOS:C/. Alcalde Fdo. Dancausa n. 21Pol. Gamonal. 09007 BurgosTel. 947 49 40 [email protected]

CÁCERES:Pol. Ind. CapellaníasHerreros C-4 n 4. 10005 CáceresTel. 927 03 06 [email protected]

CÁDIZ - Jerez:Pol. El Portal, C/. Sudáfrica s/nºP. E. Mª Eugenia, 1. 11408 JerezTel. 956 35 37 [email protected]

CÁDIZ - Algeciras:Av. Caetaria, par. 31811206 AlgecirasTel. 956 62 69 [email protected]

CÁDIZ - S. Fernando/Pto. Real:Pol. Tres Caminos. C/.Róbalo 611510 Puerto RealTel. 956 06 06 [email protected]

CASTELLÓN:Av. Enrique Gimeno, 24Pol. C. Transporte. CP 12006Tel. 96 147 90 [email protected]

CASTELLÓN - Vinaroz:Polígono Ind. nº 13C/. B PP-1 - 12500 VinarozTel. 96 147 90 [email protected]

CIUDAD REAL:Pol. Ctra. de Carrión, n. 110CHnos Lumière. 13005 Ciudad RealTel. 926 22 13 [email protected]

CÓRDOBA:Juan Bautista Escudero, 219 C14014 CórdobaTel. 957 32 27 [email protected]

CÓRDOBA - Lucena:C/. Viñuela, 17 - Pol. La Viñuela14900 LucenaTel. 957 10 47 [email protected]

GIRONA:Pol. Ind. Pla d'AbastamentsC/. Falgàs, 11- 17005 GironaTel. 972 40 64 [email protected]

GIRONA - Figueres/Cat. Nord:Pol. Vilatenim. C/. Europa, 217600 FigueresTel. 972 67 19 [email protected]

GRANADA:Pol. Juncaril, C/. Lanjarón, 1018220 AlboloteTel. 958 49 10 [email protected]

HUELVA:Pol. Industrial La Pazparcela 71-B. 21007 HuelvaTel. 959 27 01 [email protected]

JAÉN:Pol. Olivares, Cazalilla, p. 5323009 JaénTel. 953 28 03 [email protected]

LEÓN:Ctra. de Las Lomas nº 424227 ValdelafuenteTel. 987 03 45 [email protected]

LLEIDA:Pol. Ind. Els Frares. Fase 3,par. 71 nave 5-6. 25190 LleidaTel. 973 75 06 [email protected]

LOGROÑO:Pol. La Portalada II, pab. 4-5-6C/. Segador, 26. 26006 LogroñoTel. 941 58 69 [email protected]

MADRID - San Fernando:Av. de Castilla, 26 naves 10-1128830 S. Fernando de HenaresTel. 91 675 12 [email protected]

MADRID - Centro:Ronda de Segovia, 1128005 MadridTel. 91 469 14 [email protected]

MADRID - Alcalá de Henares:Pol. Santa Rosa, área La GarenaFrancisco Alonso, 3 nave 6. CP 28806Tel. 91 299 82 [email protected]

MADRID - Fuenlabrada:Pol. Ind. Cantueña. C/. Fragua, 828944 FuenlabradaTel. 91 642 35 [email protected]

MADRID - Rivas-Vaciamadrid:C/. Electrodo, 8828522 Rivas-VaciamadridTel. 91 499 09 [email protected]

MADRID - Alcobendas:Av. de Valdelaparra, 1328108 AlcobendasTel. 91 661 25 [email protected]

MADRID - Leganés/Alcorcón:Pol. San José de ValderasC/. Metal, 12 - 28918 LeganésTel. 91 675 04 [email protected]

MÁLAGA:C/. Brasilia, 16 - Pol. El Viso29006 MálagaTel. 952 04 04 [email protected]

MÁLAGA - Marbella:Polígono Ind. La ErmitaC/. Oro, 26. 29603 MarbellaTel. 952 89 84 [email protected]

MURCIA - San Ginés:Pol. Oeste, Principal, p. 21/1030169 San GinésTel. 968 88 90 [email protected]

MURCIA - Cartagena:Polígono Cabezo BeazaLuxemburgo I3.30353 CartagenaTel. 968 08 63 [email protected]

NAVARRA - Noain:Pol. Ind. Talluntxe. C/. D nº 3331110 NoainTel. 948 31 62 [email protected]

PALMA DE MALLORCA:C/. Gremi de Boneters, 15Pol. Son Castelló - CP 07009Tel. 971 43 27 [email protected]

SALAMANCA:Av. Fuentesauco,73. Pol. Villares37184 Villares de la ReinaTel. 923 20 41 [email protected]

SEVILLA:Pol. Ind. Store. C/. Nivel, 1041008 SevillaTel. 95 499 97 [email protected]

SEVILLA - Bollullos:PIBO, Av. Valencina p. 124-12541110 Bollullos de la MitaciónTel. 95 499 97 [email protected]

SEVILLA - Dos Hermanas:Pol. Ctra. Isla, Río Viejo, R-2041703 Dos HermanasTel. 95 499 97 [email protected]

SEVILLA - Mairena:Pol. PISA. C/. Desarrollo, 1141927 Mairena de AljarafeTel. 95 499 97 [email protected]

TARRAGONA:C/. del Ferro, 18-20Pol. Riu Clar. 43006 TarragonaTel. 977 20 64 [email protected]

TARRAGONA - Reus:Víctor Català, 4643206 Reus (Tarragona)Tel. 977 32 85 [email protected]

TOLEDO:Pol. Sta. María BenquerenciaC/. Jarama, 62. 45007 ToledoTel. 925 33 41 [email protected]

TOLEDO - Talavera de la Reina:C/. Luis Braille, 1245600 Talavera de la ReinaTel. 925 10 79 [email protected]

VALENCIA:Río Eresma, s/n.º46026 ValenciaTel. 96 147 90 [email protected]

VALENCIA - El Puig:P. I. nº 7, C/.Brosquil, n. III-IV46540 El PuigTel. 96 147 90 [email protected]

VALENCIA - Paterna:P. E. Táctica, C/. Corretger,parcela 6. 46980 PaternaTel. 96 147 90 [email protected]

VALENCIA - Gandía:Pol. Alcodar, C/. Brosquil, 646701 GandíaTel. 96 147 90 [email protected]

VALENCIA - Alzira:Pol. nº 1, Ronda Tintorers, 2646600 AlziraTel. 96 147 90 [email protected]

VALLADOLID:Pol. San Cristóbal, C/. Pirita, 4147012 ValladolidTel. 983 21 94 [email protected]

ZARAGOZA - Argualas:Polígono Argualas, nave 5050012 ZaragozaTel. 976 35 67 [email protected]

ZARAGOZA - Cogullada:Ctra. de Cogullada 20, nave 350014 ZaragozaTel. 976 11 00 [email protected]

BARCELONA - Central:Provenza, 392 planta 2089025 BarcelonaTel. 93 446 27 80Fax 93 456 90 [email protected]

OFFICES &

COMMERCIAL DPT:

Channel:Salvadorescoda_videos

Web:www.salvadorescoda.com

COMMERCIAL NETWORK:

Head Office:Provenza, 392 2 floor08025 Barcelona

nd

Export Department:Phone +34 93 446 27 81Fax +34 93 446 27 [email protected] Salvador Escoda Mundoclima

®

price list - splits mounting accessories

Documents