CORRIDORCONNECTIONS

PRICE LIST 2017

HISTORY

Corridor Connections has been working in the Hydraulics Industry for 23 years, before that since 1985. Our areas of

expertise are special purpose machine tools, hydraulic fixtures, earthmoving/construction equipment and industrial

systems. We have provided solutions all over Australia and around the world - intermittent faults, old equipment upgrades,

design/build projects for end users and OEMs.

SCOPE OF SERVICES

Pascal Engineering Distributor, Stockist www.pascaleng.co.jp/us

Oilpath Hydraulics Stockist www.oilpathhydraulics.com.au

Hydraforce Inc. Stockist www.hydraforce.com

Sun Hydraulics Inc. Stockist www.sunhydraulics.com

Vonberg Valve Inc Stockist www.vonberg.com

Power unit design Basic or custom designed, OEM series production or one off.

Hydraulic coolers Fan cooled units, AC/DC small Australian designed/made.

Hydraulic fittings Metric Light, Heavy, ORFS, BSP and JIC

POINT OF DIFFERENCE

There are many options when looking for hydraulic services. What we offer is a depth of knowledge and experience in a

range of industries. What we have learned can make a solution to your problem less difficult. We have a wide range of

valves and parts in stock. We can supply accumulators charged to your requirements, pumps, motors and components

from most manufacturers, we have a large range of Cetop 3 (NG6) and Cetop 5 (NG10) solenoid valves in stock, DIN

plugs and Deutsch connectors.

Electrical components, moulded DIN, Junior Timer and Deutsch Plug/cables, lamp plugs, pressure switches, transducers.

PWM controllers, valve drivers and pots.

We design and manufacture simple custom manifolds and bodies, aluminium and steel in house, small volume - short

lead time.

We have designed and manufactured lubrication systems for machine tools: Spindle and jacket cooling systems: Oil

cleaning and preparation systems. Die change systems, hydraulic die clamps and Pump/Control units.

CORRIDORCONNECTIONS

CORRIDORCONNECTIONS

CETOP VALVES

Cetop 3 (Ng6)

Cetop 5 (Ng10)

Cetop 7 (Ng16)

Sandwich valves

CUSTOM POWER UNITS

Oil coolers

Accumulators

Filters and Elements

Hoses and Fittings

PUMPS AND MOTORS

Piston, Vane, Gear

Gerotor, Geroller

Air over oil

Hascal

ACCESSORIES

Moulded plugs and cables

DIN, Deutsch, Junior Timer

Pressure switches

ECUs Controllers PWM

3

HYDRAFORCE

Hydraforce is a USA based manufacturer of hydraulic valves, manifolds and line bodies and associated electronics.

Hydraforce are Tier 1 suppliers to reputable manufacturers such as Caterpillar, John Deere, Case New Holland and

others. As such their quality control is second to none. Products are designed and manufactured to the highest standard

to ensure that they are capable of doing their intended function on your machine for the longest period.

OVERVIEW

There are 3 basic types of cartridge valves; -

1. ISO standard cavity

2. Manufacturer specific cavity

3. Parts in cavity

Hydraforce products generally conform to ISO specifications for installation in manifolds and equipment, this means that

the port configuration allows for standardised tooling and interchange with other ISO products. It is possible to replace

faulty valves with a Hydraforce cartridges- we can assist with the cross matching.

Hydraforce do have exceptions to the ISO products. They have valves designed for OEMs or which require special

features not practically achievable in the ISO envelope. There are also “Drop In” cartridges and the HyPerformance series

valves rated to 345 bar. We can assist in the identification and supply of Hydraforce valves on request.

Hydraforce manufacture a range of electronic products to let you get the best performance and control out of your

system. Economical plug top controllers to powerful ECU modules to control your machine, these products are rugged,

designed to be installed on machine, hot, cold, vibration and in the elements, wet and horrible.

HYDRAFORCE

Not the low cost solution - value for money, guaranteed performance, built in durability.

Stock - Wide range available, ready for immediate dispatch to you.

Technical support- 30 years hydraulics experience, we can help you solve the problem. Cleaning and preparation

systems. Die change systems, hydraulic die clamps and Pump/ Control units.

4

SUN PRODUCTS - STOCK LINE

PRESSURE CONTROL VALVES

Relief

Reducing

Reducing Relieving

Sequence

FLOW CONTROL VALVES

Needle

LOAD HOLDING VALVES

Counter Balance

DIRECTIONAL VALVES

Check

Logic Elements

SOLENOID OPERATED VALVES

2/2 Way (2 Position, 2 Way)

2/3 Way

2/4 Way

3/4 Way

BODIES

Line (Threaded Connections)

Sandwich (Cetop or NG style)

Custom designed, function specific- space saving, reduced fitting count.

Sun manufacture a huge range of valves, we stock more than listed and can source any other products according to your

requirements. We carry more Series 1 valves (60lpm), some series 0 and 2 and fewer series 3 (240 lpm)

5

PASCAL PRODUCT SCOPE

WORK CLAMPING SYSTEM

Swing Clamps- Hydraulic or Pneumatic

Link Clamps- Hydraulic or Pneumatic

Work Supports- Hydraulic or Pneumatic

Rotary Joint, 2-16 lines

PALLET CLAMPING SYSTEM

Pallet Clamps, Pal Coupler, Pal Fix. Precision location system for pallet, jigs and fixtures

GAS SPRINGS

Nitrogen Gas Springs, long life, high spring rate for size, linear curve

ROBOT EQUIPMENT

Nitrogen Gas Balancer- more efficient than hydraulic, compact and reliable.

Robot End Effector Tool Changer

Magnetic Gripper

OTHER PRODUCT GROUPS

Indexing Units, 90°- Fast, durable and accurate part indexing.

Machining Centre Elements, Pallet Coupling, Fluid couplers, Gas Balancers, Tool Changer.

Press Machine equipment, die changers, travelling clamps, die lifters and control system.

Injection Moulding Machine, magnetic clamps, die clamps, die location systems.

Hydraulic Cylinders, double/ single acting, hollow rod, manifold mount or threaded body.

Auto Couplers, fluid connection for Hydraulic, Pneumatic or coolant application.

Die Changer System, rapid unclamp and re-clamp of press tools. Hands off, tool free.

Magnetic clamps- rapid mould change for Injection Moulding machine.

Die/ Mould Rotators- 90° rotation of heavy dies and moulds.

Control equipment- hydraulic pumps, pressure switches, valves and air operated power units.

CORRIDOR CONNECTIONS

We stock a range of cylinders, clamps, work supports couplers and rotary unions, pumps, control units and seal kits. Ask

and we will try to satisfy your needs.

6

EurekaEngineeredProducts.com

Hydraulic Cylinder Solutions

Introducing the Rebel Series …

Features and Benefits:

High quality cast steel rod clevis and base for longer life and improved shock resistance Polymer bearings for reduced wear on barrel and rod surface Heavy duty Hallite seals - available throughout Australia Screwed gland construction for ease of maintenance Optional port configurations (90º to pin is standard) Can be customised to your requirements 12 month limited warranty – conditions apply Made and supported in Australia

Mounting Options:

Female Clevis (Standard) Male Clevis Pin Eye Top Link Trunnion Mount Spherical Bearing Custom

Cast Steel Rod Clevis

Integral Ports

High Strength Steel Gland and Piston

One Piece Cast Steel Base

Swipe Honed Tube

High Quality K1045 Chrome Bar

Polyurethane Wiper Twin Lip Rod Seal

Glass Filled Nylon Bearing

Five Piece Heavy Duty Piston Seal

7

Specifications: Suitable for medium duty applications Maximum working pressure up to 3000 PSI (20.7 MPa) Peak pressure up to 4000 PSI (27.6 MPa) Consideration should be given to buckling as stroke and pressure increase Operating temperature between -20ºC and 100ºC Rod speed up to 0.5 m/s

Female & Male Clevis Cylinder Standard Sizes:

ØB ØR DL ØP(**) U GD GP BP G RC BL BC W ØOD M

1.5" (38.1)

0.875” (22.23)

241 0.75”

(19.05) 9/16”

UN O Ring 28 29 13.5 21 57 146 38 46

2.0" (50.8)

40

2.0" (50.8)

1.25” (31.75)

241 0.75”

(19.05) 9/16”

UN O Ring 28 29 13.5 21 57 146 38 46

2.5" (63.5) 40

2.5" (63.5)

1.50” (38.1)

311 1.0”

(25.4) 3/4”

UN O Ring 57 31 16 27 95.5 164 51.5 65

3.0"(*) (76.2) 40

3.0" (76.2)

1.50” (38.1)

311 1.0”

(25.4) 3/4”

UN O Ring 57 31 16 27 95.5 164 51.5 65

3.5" (88.9)

40

3.5" (88.9)

1.75” (44.45)

311 1.0”

(25.4) 3/4”

UN O Ring 57 31 16 27 91.5 168 51.5 65

4.0" (101.6)

40

4.0" (101.6)

1.75” (44.45)

311 1.0”

(25.4) 3/4”

UN O Ring 57 25 16 27 92.5 167 51.5 65

4.5" (114.3) 40

All dimensions correct at time of publication. Subject to change without notice. (*) Gland Outer Diameter (OD) on 2.5” cylinder is Ø87. For all other cylinders gland OD is equal to barrel OD. (**) 1” pins can be optioned up to 1.25” pin.

Manufactured By: Eureka Engineered Products Pty Ltd (ABN 35 047 814 147) 26A Wiltshire Lane Ballarat VIC 3356 PO Box 4174, Alfredton VIC 3350 AUSTRALIA Ph +61 3 5336 0011 Fx +61 3 5336 0022 Sales@EurekaEngineeredProducts.com www.EurekaEngineeredProducts.com

Your Local Distributor:

CORRIDORCONNECTIONS

0418 549 188nigel@corridorconnections.com.au

45 Cooinda Road,Beaconsfield, Victoria 3807

www.corridorconnections.com.au

8

Specifications: Suitable for medium duty applications Maximum working pressure up to 3000 PSI (20.7 MPa) Peak pressure up to 4000 PSI (27.6 MPa) Consideration should be given to buckling as stroke and pressure increase Operating temperature between -20ºC and 100ºC Rod speed up to 0.5 m/s

Female & Male Clevis Cylinder Standard Sizes:

ØB ØR DL ØP(**) U GD GP BP G RC BL BC W ØOD M

1.5" (38.1)

0.875” (22.23)

241 0.75”

(19.05) 9/16”

UN O Ring 28 29 13.5 21 57 146 38 46

2.0" (50.8)

40

2.0" (50.8)

1.25” (31.75)

241 0.75”

(19.05) 9/16”

UN O Ring 28 29 13.5 21 57 146 38 46

2.5" (63.5) 40

2.5" (63.5)

1.50” (38.1)

311 1.0”

(25.4) 3/4”

UN O Ring 57 31 16 27 95.5 164 51.5 65

3.0"(*) (76.2) 40

3.0" (76.2)

1.50” (38.1)

311 1.0”

(25.4) 3/4”

UN O Ring 57 31 16 27 95.5 164 51.5 65

3.5" (88.9)

40

3.5" (88.9)

1.75” (44.45)

311 1.0”

(25.4) 3/4”

UN O Ring 57 31 16 27 91.5 168 51.5 65

4.0" (101.6)

40

4.0" (101.6)

1.75” (44.45)

311 1.0”

(25.4) 3/4”

UN O Ring 57 25 16 27 92.5 167 51.5 65

4.5" (114.3) 40

All dimensions correct at time of publication. Subject to change without notice. (*) Gland Outer Diameter (OD) on 2.5” cylinder is Ø87. For all other cylinders gland OD is equal to barrel OD. (**) 1” pins can be optioned up to 1.25” pin.

Manufactured By: Eureka Engineered Products Pty Ltd (ABN 35 047 814 147) 26A Wiltshire Lane Ballarat VIC 3356 PO Box 4174, Alfredton VIC 3350 AUSTRALIA Ph +61 3 5336 0011 Fx +61 3 5336 0022 Sales@EurekaEngineeredProducts.com www.EurekaEngineeredProducts.com

Your Local Distributor:

ORIFICE DISC SIZING GUIDE (mm)Curves represent orifice disc drill-thru diameters.

Note: Table is calculated at 32 cSt (150 SSU) oil at 40°C. Values will change with viscosity changes.

95/25

98/26

102/27

106/28

4/1

0 0.710

1.420

3.450

5.275

6.9100

10.3150

13.8200

20.7300

27.6400

34.5500

41.4600

48.3700

55.2800

62.1900

69.01000

103.41500

137.92000

172.42500

206.93000

P BAR/PSI

FL

OW

- L

PM

/GP

M

114/30

110/29

91/24

87/23

83/22

79/21

76/20

72/19

68/18

64/17

61/16

57/15

53/14

49/13

45/12

42/11

38/10

34/9

30/8

26/7

23/6

19/5

15/4

11/3

8/2

∆

15.4

12.8

10.2

8.9

8.2

7.7

7.2

6.8

6.6

6.4

6.1

5.9

5.6

5.4

5.1

4.9

4.6

4.4

4.1

3.8

3.6

3.3

3.0

2.8

2.5

2.3

2.0

1.8

1.5

1.3

1.0

.75

.50

.35

8.460.4

Orifice Disc Sizing Guides (cont’d)

®HYDRAFORCE

HYDRAFORCE.com®

None

.125 Dia./.074 Dp.

.2187 Dia./.050 Dp.

None

None

.125 Dia./.074 Dp.

.2187 Dia./.050 Dp.

None

None

.125 Dia./.074 Dp.

.2187 Dia./.050 Dp.

None

None

.125 Dia./.084 Dp.

.125 Dia./.084 Dp.

.2197 Dia./.060 Dp.

None

None

.125 Dia./.084 Dp.

.125 Dia./.084 Dp.

.2197 Dia./.060 Dp.

None

None

.015 to .062

.063 to .109

.110 & Up

None

.015 to .062

.063 to .109

.110 & Up

None

.015 to .062

.063 to .109

.110 & Up

None

.015

.016 to .062

.063 to .109

.110 & Up

None

.015

.016 to .062

.063 to .109

.110 & Up

HOUSINGS AND ACCESSORY PRODUCTS

Orifice Disc Installation & Sizing Guide

8.460.1

FLOW-LIMITING ORIFICE DISCSStandard HydraForce cavity forming tools enable the designer to make convenient use of flow-limiting orifice discs, installed imme-diately under the cartridge when pilot drill diameters shown on housing details, or smaller, are used.

Orifice DiscPart No.*

Disc Dia.(Max.)

Pilot DrillDia. (Max.)

.500 .437

Drill-Thru Dia.Counterbore Dia./

Counterbore Depth

.562 .500

.625 .562

7051_ _ _for cavities:

VC08-2VC08-4

7057_ _ _for cavitiy:

VC08-3

7063_ _ _for cavities:VC10-2VC10-3VC10-4

.872 .781

.810 .718

*Last 3 digits determined by drill-thru diameter.

Orifice Discs – 5000 PSID Max.

All dimensions shown in inches.

7087_ _ _for cavities:

VC12-2VC12-3

7081_ _ _for cavity:

VC12-4

Drill Thru Dia.Flow

C’Bore Depth

C’Bore Dia.

Disc Dia.

Pilot DrillDia. (Max.)

HYDRAFORCE.com®

9

USEFUL HYDRAULIC FORMULAE

10

SYMBOLS AND UNITS

11

PIPE SIZE / FLOW VELOCITY NOMOGRAM

FlowPipe Size

Inside Area Inside Dia. Flow Velocity

Nominal Pipe Size

Ref

eren

ce V

alue

of

Vel

ocity

in

Pre

ssur

e P

ipe

Ref

eren

ce V

alue

of

Vel

ocity

in

Suc

tion

Pip

e

12

Matters of Interest

There is a reasonable understanding regarding the size nomenclature for hoses and fittings. Usually the size is referred to by “dash number eg -04 or -21. This is accepted as being 4 X 1/16” or 21 X 1/16”, or ¼” and 1 5/16”. The exception is the SAE port size nomenclature which is also called the O Ring Boss style fitting (or UN O Ring).This table gives this information.

Hoist check valves and AS1418.8

There should be no doubt that the Law now requires the installation of controlled lowering devices where a load is capable of uncontrolled movement in the event ofaccidental operation of controls with the machine in a non-operating condition (switched off, being repaired eg) or failure of components such as a hose or fitting. Reference to the following documents will clarify this assertion. By extension it would apply to ramps, tailgates, hoists, cranes, blades- anything which might fall and trap aperson or limb.

Australian Standard AS1418.8 Sect 4 and 5. Copyrighted so cannot be attached Department of Infrastructure, National Code of Practice Section J Check List.

CORRIDORCONNECTIONS

0418 549 188nigel@corridorconnections.com.au

45 Cooinda Road,Beaconsfield, Victoria 3807www.corridorconnections.com.au

13

See www.oilpathhydraulics.com.au for detailed standard terms and conditions

15

INDEX PAGEINDEX

14REMIALCSIDOP11 & OP10 45 L/MIN DIRECTIONAL CONTROL VALVE

EVLAV LORTNOC LANOITCERID NIM/L 021 02POOP20 SOLENOID OPERATED DIRECTIONAL CONTROL VALVES

SEVLAV ROTCELES TROP 3 72POSEVLAV ROTCELES TROP 6 08PO

OP80S SOLENOID OPERATED 6 PORT SELECTOR VALVESLORTNOC WOLF YTIROIRP YRATOR 15PO

EVLAV KCURT LOOPS NIWT NIM/L 061 22POOP25 175 L/MIN SINGLE SPOOL PROPORTIONAL TRUCK VALVE

)DETAREPO YLLACITAMEUNP( SEVLAV KCEHC TSIOHSEVLAV KCEHC TSIOH DETAREPO DIONELOS

SDLOFINAM RAB POTEC 211POSDLOFINAM RAB POTEC 111PO

KNILBEW EGAKCAP EVLAV ECROFARDYH - HTAPLIOSDLOFINAM MOTSUC HTAPLIO

SEVLAV KCOL ELBUOD 101POSEVLAV FEILER ENIL - NI 011PO

SEVLAV FEILER ENIL SSORC 511POSEVLAV HCTIH KCIUQ 731PO

SEGDIRTRAC LORTNOC WOLF DESIROTOM ECRUOS

20262729313335384041424344454647495152

15

16

Disclaimer By using this Price List you acknowledge that you have read, understand and agree to be bound by the following terms and conditions 

This Price List catalogue is provided by Oilpath Hydraulics Pty Ltd to give general product information only. It is the responsibility of the user to have the technical expertise, to evaluate, assess and make final selection. Due to complexity and diversity of possible hydraulic systems, circuits and working conditions Oilpath and  its  employees  can  only  offer  general  product  information.  It  is  the  sole  responsibility  of  the  user  to  ensure  that  all  product  specifications,  safety warnings, government regulations and correct procedures are considered and met. 

Oilpath Hydraulics Pty Ltd has endeavored to produce accurate information in this Price List and shall not be  responsible  for any  incorrect  information  that  results from unintentional oversight. 

Due to the continuous improvements of product specifications in this Price List, prices are subject to change by Oilpath Hydraulics Pty Ltd at any time, without notice. 

All prices in this Price List exclude Goods & Services Tax (GST) 

All prices in this Price List are subject to change without notice 

Oilpath reserve the right to charge for Minimum orders under $40 

17

Model  OP11 & OP10‐4 

OP11 & OP10‐4 DIRECTIONAL CONTROL VALVE PARALLEL CIRCUIT  Page No. 

OP11 & OP10‐4 DIRECTIONAL CONTROL VALVE PARALLEL CIRCUIT 

Nominal Flow 45 l/min Maximum Operating Pressure

345 bar Up to 4 Spools available Low Spool Leakage Side or top port Inlet & Outlet

Closed Circuit & Power Beyondoptions

HydraForce Relief Valve (OP11) Hardened Steel Non‐Return

Check Seat New Handle  & Air Option

18

Spool Types 

D  Double Acting 

Q 

Double Acting low flow version 

S  Single Acting 

M  Motor Spool 

Options 

PB  High pressure carry over. Plug supplied in package as standard 

CC  Closed Centre 

NR  Relief valve not required 

SCDA Spring centred detented to port A 

SCDB Spring centred detented to port B 

A  Air Control (OP118) supplied only with manual override 

D  Three position detent 

E  Electric limit switch followed by numeral indicating spools 

R Cable Control 

Model  OP11 & OP10‐4 

OP11 & OP10‐4 DIRECTIONAL CONTROL VALVE PARALLEL CIRCUIT  Page No. 

Valve  Relief Model  Setting 

Specify Relief Valve Pressure Setting 

100 ‐ 5000 psi 

OP11  HydraForce Relief 

Valves on OP11 

No Setting required with NR option 

400 ‐ 5000 psi Oilpath 

OP10  Relief valves on OP10‐4 

(4 spool only) 

Examples  OP11   D  2000  PB OP11   DS  2500  D1 OP11   DDD  1500  D1A23 OP10   DSDM  3500  SCDB23 

All codes prefaced by OP10 or OP11 

19

Part  Number     Description  List  Price

01110200 OP11D2000    Single  Spool Double Acting  Valve $282.00

01120300 OP11DD2000    Two   Spool  Double Acting Valve $433.00

01130400 OP11DDD2000       Triple  Spool Double Acting Valve $575.00

01040500 OP10DDDD2000    Four  Spool  Double Acting Valve $709.00

OP11/10 Valve Prices

The above prices are for spring centred double acting valves. For valves fitted with theoptions below please add 15% to the appropriate valve

Please be aware that Oilpath will not warrant any product that has been modifiedor repaired other than done directly by Oilpath Factory Personnel

OPTIONS Code  Part Number  Description  List Price

D1  507020  Detent per spool, (three pos.) factory fitted # indicates pos.  $38.00

CC  511048  OP10 Pressure Relief Blanking Plug kit, for closed centre    $38.00

511014  OP11 Pressure Relief Blanking Plug kit, for closed centre       $47.00

E1     503003 Electric Limit Switch for single spool valve, factory fitted   Note: Micro switch is not included in price   $110.00

E12  503004 Electric Limit Switch for double spool valve,  factory fitted Note: Micro switch is not included in price  $203.00

E123  503005 Electric Limit Switch for triple spool valve,  factory fitted  Note: Micro switch is not included in price   $281.00

E1234  503006 Electric Limit Switch for four spool valve,  factory fitted  Note: Micro switch is not included in price  $366.00

503010 Micro Switch for above kits, (one per valve) standard micro switch.  This switch has a weather‐proof rating to  IP67     $82.00

13A  503009 Optional micro switch sleeve for S/A spools with code E, kit only  $19.00

Q  Optional D/A spool with metering for low flow DC power units  POA

SCDA  509018  Spring Centred Detent with det. acting on A port is pressurised    $126.00

SCDB  509012  Spring Centred Detent with det. acting on B port is pressurised     $126.00

S/O  509010  Spring offset to “B” (No centre position)   $42.00

A1  OP118 Air Kit with handle control  $162.00

Cable     RVC Controls, cables and connection kits  POA

20

OP10/11 SPARESCODE  DESCRIPTION 

LIST PRICE

RV50‐26A‐0‐P‐50  HydraForce Relief Valve up to 5000 psi  $160.00

RV10‐26A‐0‐N‐30  HydraForce Relief Valve up to 3000 psi  $144.00

512011  Seal Kit Single Spool  $27.00

512015  Seal Kit Double Spool  $30.00

512043  Seal Kit Triple Spool  $33.00

512017  Seal Kit Four Spool  $36.00

511048  CC  OP10 Pressure Relief Blanking Plug kit, for closed centre   $42.00

511014  OP11 Pressure Relief Blanking Plug kit, for closed centre   $52.00

509018  SCDA  Spring Centred Detent with det. acting on A port is pressurised   $136.00

509012  SCDB  Spring Centred Detent with det. acting on B port is pressurised     $136.00

509001  Spring Centering Kit to suit all spools, without spring cap  $37.00

507020  D1  Detent per spool, (three pos.) kit     $41.00

506081  OP118 Air Kit for OP11  $172.00

505016  Relief Valve complete cartridge including lift drop check  $113.00

504503  Handle Lever complete with nut and rubber knob M8  $30.00

504504  Handle Lever Stainless Steel M10 diameter  $34.00

504501  Handle Lever complete with nut and rubber knob   $30.00

504027  Lever Box with shift leg & rubber boot but no handle  $93.00

503010  Micro Switch for below kits, (one per valve) standard micro switch has a weather‐proof rating to  IP67   $89.00

503009  13A  Optional micro switch sleeve for S/A spools with code E, kit only   $126.00

503003  E1     Electric Limit Switch for single spool valve, kit    Note: Micro switch is not included in price  $126.00

503004  E12  Electric Limit Switch for double spool valve, kit    Note: Micro switch is not included in price         $219.00

503005  E123  Electric Limit Switch for triple spool valve, kit         Note: Micro switch is not included in price  $304.00

503006  E1234  Electric Limit Switch for four spool valve, kit  Note: Micro switch is not included in price         $394.00

21

416220 Rubber Boot Bottom Clips  $4.00

416219 Rubber Boot Top Clips $4.00

416009 Relief Valve Main Spring Z $23.00

416008 Relief Valve Main Spring X $23.00

416005 Relief Valve Main Spring Y $23.00

413002 Rubber Boot for lever box $11.00

340001 Spring Cup supplied without M5 cap screws$26.00

249017 Q  Optional D/A spool with metering for low flow  POA

249004 Motor Spool with no spring centering mechanism$113.00

249003 Single Acting Spool with no spring centering mechanism $113.00

249002 Double Acting Spool with no spring centering mechanism $113.00

With spring centering mechanism ADD $37.00

22

Model  OP20 

OP20 DIRECTIONAL CONTROL VALVE SERIES PARALLEL CIRCUIT  Page No. 

OP20 DIRECTIONAL CONTROL VALVE  SERIES PARALLEL CIRCUIT 

Nominal Flow 100 l/min Hi Flow version 120 l/min Maximum Operating Pressure 275 bar Up to 5 Spools available Low Spool Leakage Side or top port Outlet Closed Circuit & Power Beyond options Choice of Relief Valves Individual Load Checks on each “D” & “S” Spool Proportional Air, or “on‐off ” air, both with handle option

23

Spool Types 

D Double acting 

S  Single acting 

M  Motor control 

K 

Flow control spool not pressure compensated 

L Double acting spool with no load check 

P 

Pressure Compensated flow control 45 l/min max 

Please note maximum tank pressure is 250 psi on all OP20 valves 

Options 

PB  High pressure carry over  D  Three position 

detent 

CC  Closed centre  E  Electric limit switch 

NR  Relief not required W  Air control 

OP106 

BF  Bottom faced outlet  R  Cable control 

Morse RCV 

SCDA  Spring centred detent to "A"  J  Proportional air 

control 

SCDB  Spring centred detent to "B"  H 

Handle on auxiliary control e.g. W1H1

HI FLOW 

Hi Flow to 120 l/min with 3/4" or 1 1/16" ports & R2 Relief 

OP 106S 

Electric over air solenoid control state voltage required. E.g. OP106S24V 

MU Special plating and hardware for mine or marine use 

UR Solenoid operated unloading relief valve state voltage 

RESTA Restricted detent to A port  RESTB  Restricted detent

to B port 

Model  OP20 

OP20 DIRECTIONAL CONTROL VALVE SERIES PARALLEL CIRCUIT  Page No. 

Relief Setting 

Specify pressure within the range of 600 – 4000 psi 

Examples of ordering codes:  OP20 D 2000 PB OP20 DDS 2000 W123H123 OP20 DSSS 2000 SCDB1J234 OP20 DDDDD 1500 UR24V 

All codes are prefaced with OP20 

24

OP20 100 lpm Monoblock Valve Part Number 

Description  List Price 

02010100  OP20D2000  Single  Spool Double Acting  Valve  $379.00 

02020200  OP20DD2000  Two Spool  Valve  $558.00 

02030300  OP20DDD2000 Triple   Spool  Valve  $752.00 

02040400  OP20DDDD2000 Four  Spool   Valve  $963.00 

02050500  OP20DDDDD2000 Five   Spool   Valve  $1,188.00 

The above prices are for spring centred double acting valves. For valves fitted with theoptions below please add 15% to the appropriate valve

Please be aware that Oilpath will not warrant any product that has been modified orrepaired other than done directly by Oilpath Factory Personnel

OPTIONSCode  Part 

Number Description  List Price

P   ‐  Priority Flow Control Spool Factory fit only, lead time applies  $336.00

M  ‐  Motor Spool, penalty per each when factory fitted  $14.00

K    ‐  Spool includes friction detent and can only be factory fitted      $92.00

L  ‐  L Spool is D/A and has no load checks, used for high flows applications  $36.00

D1  507007  Detent per spool, (3 position) factory fit, # indicates position     $43.00

SCDB  509020  Spring Centred Detent with det. Acting on B port is pressurised   $129.00

SCDA  509007  Spring Centred Detent with det. acting on A port is pressurised          $129.00

PB  511003  High Pressure Carry over plug for power beyond “Hi‐Cap”    $24.00

PBH  511005  High Pressure Carry over plug 1‐ 1/16” UNF Hi ‐ Flow      $58.00

CC  511047  Closed Centre Plug (Plug A) part of kit for closed centre   $23.00

NR  511002  Pressure Relief Plug (Plug B) part of kit for closed centre    $22.00

LW  ‐  Pressure Relief Lock Wire (lead seal)  $24.00

BF  ‐  Bottom Face Outlet available only as special build from factory  POA

25

S/O  ‐  Spring Offset P‐B (No Centre Position)  $30.00

E  503012  Electric Limit Switch, one micro switch supplied in price per spool          POA

MU  ‐  Mine Use per spool, factory build only, nylon end caps and plated spool   $30.00

W1  506023  OP106 air shift   $182.00

‐  506028  OP106 Solenoid manifold kit (includes manifold, screws and ‘O’ rings. 12 or 24 volt DC  $92.00

506027  OP106 Solenoid kit (includes manifold kit, and 2 off solenoid valves  $398.00

‐  506025    OP106 Solenoid Air kit (incl. OP106 kit, manifold, and 2 off solenoid valves 24 volt DC  $558.00

‐  506031   same as above for 12 volt DC  $558.00

H1  ‐  Used only in price build for new assembly requiring dual control, (e.g.) lever and air or lever and cable.  $114.00

J1  506002  Proportional Air shift  $388.00

HI‐FLOW  ‐ 

Special D/A or S/A spools with load checks for 25 gpm for Tippers and fitted into single or double spool valves with 3/4”BSPT ports & R2 Relief per valve 

$43.00

‐  ‐  If above spools are ordered with 1 1/16”UNF service ports, per spool and in a valve with R1 or R2 relief cavity.   $49.00

FBC  ‐  Port relief cavity last spool ‐ suit RV08‐20A not including cartridge  $72.00

Port Relief 

RV08‐20A‐0‐N‐XX 

Relief Valve  $113.00

‐  CP08‐20‐N  Plug VC08‐2 to suit above cavity (CP08‐20N)  $23.00

AS xx  SVRV10‐26X 

Relief and solenoid unloading adaptor, nominate voltage and pressure.  $319.00

Cable  ‐  RVC Controls, cables and connection kits     POA

S1  ‐  Single Solenoid spool operation kit  TBA

S2  ‐  Double Solenoid spool operation kit  TBA

26

OP20 SPARES CODE  DESCRIPTION 

LIST PRICE 

MU for Spool  For Marine or mine use ADD on per spool (exchange for like)  $27.00

513044  Motor Spool with spring centering mechanism  $159.00

513037  L Spool with spring centering mechanism  $159.00

513034  Double Acting Hi Flo Spool with spring centering mechanism  $149.00

513029  Single Acting Hi‐Flo Spool with spring centering mechanism  $149.00

513028  Single Acting Spool with spring centering mechanism  $149.00

513027  Double Acting Spool with spring centering mechanism  $149.00

512055  OP106 Seal Kit all seals   $36.00

512002  Seal Kit Single Spool all seals and metal step washers   $37.00

512008  Seal Kit Double Spool all seals and metal step washers   $49.00

512029  Seal Kit Triple Spool all seals and metal step washers  $60.00

512004  Seal Kit Four Spool all seals and metal step washers   $68.00

512005  Seal Kit Five Spool all seals and metal step washers  $80.00

512021  OP105 Seal Kit all seals   POA

512019  OP104 Seal Kit all seals   POA

512016  OP103 Seal Kit all seals   $11.00

512007  Proportional Air Seal Kit (old kit with stainless steel piston)  $11.00

512003  Proportional Air Seal Kit (new kit with aluminium piston)  $87.00

511047  CC  Closed Centre Plug (Plug A) part of kit for closed centre   $25.00

511005  PBH  High Pressure Carry over plug 1‐ 1/16” UNF Hi ‐ Flow    $62.00

511003  PB  High Pressure Carry over plug for power beyond “Hi‐Cap”    $26.00

511002  NR  Pressure Relief Plug (Plug B) part of kit for closed centre  $24.00

509020  SCDB  Spring Centred Detent with det. Acting on B port is pressurised   $139.00

27

509017  Spring Centering Kit to suit all spools, supplied without spring cap  $49.00

509007  SCDA  Spring Centred Detent with det. acting on A port is pressurised   $139.00

507007  D1  Detent per spool, (3 position) kit, # indicates position   (507007)    $45.00

506028   OP106 Solenoid manifold kit (includes manifold, screws and ‘O’ rings  12 or 24 volt DC  $99.00

506027   OP106 Solenoid kit (includes manifold kit, and 2 off solenoid valves 24 volt DC  $426.00

506025  OP106 Solenoid Air kit (incl. OP106 kit, manifold, and 2 off solenoid valves 24v)   $599.00

506023  W1  OP106 air shift     $195.00

506002  J1  Proportional Air Shit  $416.00

505025  Relief Valve R2 cartridge set to 2000 psi  $201.00

505020  Relief Valve R1 (standard)  cartridge, set to 2000 psi     $149.00

504502  Handle Lever complete with nut and rubber knob  $30.00

504028  Lever Box with shift leg & rubber boot but no handle  $131.00

504015  H, Kit B used when converting standard lever assembly valve to dual control, (e.g.) lever and air or lever and cable.  $100.00

504014  H, Kit A used when fitting dual control, with air or cable already fitted.  $161.00

504010  Handle Assembly Old Style complete including handle lever     $143.00

503012  E  Electric Limit Switch, one micro switch supplied in price per spool    POA

502019  Spool Eye New Style to suit lever box handle (current style)  $28.00

413001  Rubber Boot for lever box  $11.00

340004  Spring Cap supplied without M6 cap screws  $30.00

249012  Single Acting Hi Flo Spool only  $122.00

249011  Double Acting Hi Flo Spool only  $122.00

249011  L Spool only  $122.00

249008  Motor Spool only  $130.00

249007  Single Acting Spool only  $122.00

249006  Double Acting Spool only  $122.00

28

29

Model  OP27 

OP27 3 PORT SELECTOR VALVE  Page No. 

OP27 THREE PORT SELECTOR VALVE 

3 – Port Selector Valve Cast IronConstruction

Simple Push – Pull Operation Two Position Detent Option Pneumatically Operated Option Flow Capacity up to 25 gpm Easily added to existing OP20 Circuit to facilitate control of

additional equipment Cam Roller, Spring Return Option

OPTIONS 

Port Sizes  Controls ½” BSPT  ¾” BSPT  1” BSPT  Pneumatically Actuated (B Kit) 

7/8” UNF  1‐1/16” UNF  OP20 Handle 

1‐5/16” UNF  New  Spring Offset 

Cam Roller, Spring Return Operation 

30

OP27  95 LPM 3 Port Selector Valve Part Number Description List  Price

02700100  3/4” Ports and fitted with a plastic knob  $219.00

02701300  3/4” Ports and fitted with spring offset kit  $237.00

02706002  3/4” Ports and fitted with spring offset kit & new style air kit  $348.00

OPTIONS Code    Description  List  Price

H  Handle operated, OP20 style  $70.00

D  Detent  $124.00

P  Plunger Activation Option (must include S/O option)  POA

CR  Cam roller (must include S/O option)  $152.00

OP27 SPARES CODE  DESCRIPTION  LIST 

PRICE

512036  Seal Kit (Spool O rings)  $12.00

509013  Spring offset kit  $41.00

507017  Detent kit  $284.00

506044  B1 Air Kit (used with s/off)  $144.00

504011  Old handle kit Complete with  including handle lever  $157.00

420003  Plastic Knob without washer   $41.00

249001  Spool without knob or washers, plain  $141.00

31

Model  OP80 

OP80 6 PORT 25 GPM SELECTOR VALVE  Page No. 

OP80 SIX PORT SELECTOR VALVE 

6 – Port Selector Valve Cast IronConstruction

Flow Capacity up to 25 gpm Rugged – Handle Operation Two Position Detented Pneumatically Operated Option Push Pull Option Spring Offset Option

OPTIONS 

Port Sizes  Controls 

½” BSPT  ¾” BSPT    Pneumatically Actuated (B Kit) 

7/8” UNF  1‐1/16” UNF  Spring Offset or Push Pull 

32

OP80  95 LPM 6 Port Selector Valve Part Number  Description  List  Price

08000001  OP80 1/2”BSPT fitted with 2 position detent and OP20 style handle  $362.00

08001000  OP80 1/2”BSPT K fitted with a black plastic knob (push pull)  $313.00

08063000  Fitted with Air Kit and spring offset kit  $448.00

OPTIONS Code  Description  List  Price

MU  Marine use lever box and end cap  $95.00

OP80 SPARES Part Number  DESCRIPTION  LIST PRICE 

512037  Seal kit (Spool O rings)   $6.00

509014  Spring offset kit  $39.00

507002  Detent Kit Complete assembly  $114.00

506044  B1 Air Kit (used with s/off)  $144.00

504502  Handle Lever complete with nut and rubber knob  $30.00

33

SIX PORT SOLENOID OPERATED SELECTOR VALVE 

Model  OP80S 

Page Number 

OP80S-3/8”BSPP OP80S-1/2”BSPP Max pressure 250bar Max flow rate 40L/min 60L/min Hydraulic fluid mineral oil Fluid temperature -20~80℃Recommended viscosity 10~400mm²

6/2SELECTOR  VALVE The OILPATH OP80S-3/8”BSPP and OP80S-1/2”BSPP stackable 6 port/2 way change over valves are designed to be used when extra circuits are to be operated from one control lever on machines such as fork lift trucks, agricultural front end loader, telescopic handlers, and in transmission circuits. 

The OILPATH selector valves have been carefully designed to meet the demands of progressive machine manufacturers for cost effective, reliable circuit selectors. The valve bodies are made from a special high quality cast iron which is machined, using advanced machining techniques, to precise tolerances, ensuring, along with the other component parts, the consistency of the finished product.

34

ORDERING CODES 

Part Number Description List Price08103812 OP80S-3/8”BSPP 12 VOLT DC $250.00 08103824 OP80S-3/8”BSPP 24 VOLT DC $250.00 08101212 OP80S-1/2”BSPP 12 VOLT DC $310.00 08101224 OP80S-1/2”BSPP 24 VOLT DC $310.00

DIMENSIONS 

STACKABLE CONFIGURATION 

A B C D E F G H I J

OP80S-3/8”BSPP 175.2 84 52 36 57.5 38 42 6.4 6 52 OP80S-1/2”BSPP 229 100.6 65 46 70 50 99 8 8.4 65

35

Model 

PRIORITY FLOW CONTROL VALVE PRESSURE COMPENSATED 

OP51FC & FCR 

PAGE NUMBER 

Maximum Flow – 30 us gpm (114l/min)  Maximum Pressure – 3,000 psi (210bar) 

EXCESS FLOW” EX” 

EXCESS FLOW” EX” 

The model OP51FC is a pressure compensated swing arm adjustable flow control valve. By swinging the arm thru 90 °, the flow out the CF or controlled low port can be varied within the range given in the specification. 

Any remaining flow is bypassed to the EX or excess flow port. This flow can be used to power another circuit or can be returned to tank. Once the controlled flow is set, it will remain nearly constant with variations in pressure on either the controlled or excess flow ports. 

Please note,  if during operation the controlled flow port  is blocked, then the valve will compensate  in such a manner that  there will also be no flow at the EX or excess flow port. With no relief valve to protect the flow in the circuit upstream, pump failure and or component damage will occur. If this situation could occur then it is recommended to fit an extra relief valve upstream or use the model OP51FCR valve. 

36

• This valve can also be used as a restrictive flow control by plugging the excess flow port.

• The valve model FCR51 has a built in adjustable pressure relief. For this model, the excessflow port, labelled (EX) must be connected to tank.

• It should be noted that whenever these or any valve is used to bypass or restrictflow, heat will be generated. Steps may be required to keep system oiltemperature from becoming too high.

Model No. Port Thread Relief Valve

Flow US gpm Flow l/min Weight List Price

OP51FC- 1/2 1/2" BSPP No 0 - 16 0 - 60 kg3.8 $220.00

OP51FC - 3/4 3/4" BSPP No 0 - 30 0 - 113 kg3.8 $220.00

OP51FCR - 1/2 1/2" BSPP Yes 0 - 16 0 - 60 kg4.0 $240.00

OP51FCR - 3/4 3/4" BSPP Yes 0 - 30 0 - 113 kg4.0 $240.00

37

MODEL 

140 L/MIN TRUCK & TRAILER PNEUMATICALLY OPERATED TRUCK VALVE 

OP22‐2 

Page Number 

OP22 TIPPER VALVE 

140 l/min nominal twin spool tipper truck valve 245bar maximum pressure Proportional operation Optional HydraForce port relief valves 1”BSPP service ports & 1 ¼” BSPP tank port Handle & Air option available Slow Lowering Option available Cast & manufactured in Australia Custom designed large internal tank galleries for low pressure drop

38

PRESSU

RE DRO

P IN P.S.I. 

Part Numbers 

OP22 2000 R3 = Standard Valve 140 l/min 

OP22 2000 R3 PR = Optional HydraForce Port Reliefs 

OP22 2000 R3 SL = Optional Slow Lowering 

For Handle Option add H1 for one handle or H12 for two e.g. OP22 2000 R3 PR H12 

500 450 400 350 300 250 200 150 100 50 0 

OP22 PRESSURE DROP            

0  10  20  30  40  50  60  70  80  90  100  110  120  130  140  150 FLOW IN LITRES/MIN 

P‐A2  P‐A1  A1‐T  A2‐T  P‐T 

39

OP22 VALVE PRICES & OPTIONSCODE  DESCRIPTION Net Prices 

Qty 10+ Qty 5 ‐ 9  Qty < 502220007  OP22 SS A12 R3 1"BSPP ‐ P,A,B 1‐1/4"BSPP‐T $340.0 $365.0 $385.0

PORT RELIEF OPTION (NO CARTRIDGES) $25.0 $30.0 $35.0PORT RELIEF OPTION WITH 2X RVD50‐20C‐0‐N‐32 $120.0 $130.0 $145.01/4" BSPP GAUGE PORTS ON A& B (PLUGGED) $30.0 $35.0 $40.01/4" BSPP GAUGE PORTS ON A & B MACHINED ONLY $20.0 $25.0 $30.0VALVES MACHINES WITH ALTERNATIVE PORTING $20.0 $25.0 $30.0MANUAL OVERRIDE HANDLES (FACTORY ONLY) PER SPOOL $90.0 $100.0 $110.0

OP22 VALVE SPARES Code  Description  LIST PRICE 

CP10‐20‐N  OP22 Port relief Plug  $28.00

512098  OP22 Seal kit  $22.00

505069  OP22 R3 Relief Valve Cartridge  $179.00

505052  OP22 Spring Chamber Vent  $30.00

504060  OP22 Optional Handle Assembly  $336.00

253163  OP22 Spring Cap Port Relief Version  $137.00

505069  OP22 R3 Relief Valve Cartridge  $179.00

40

Model OP25

OP25 PROPORTIONALLY CONTROLLED TRUCK VALVE Page No.

OP25 PROPORTIONALLY AIR ACTUATED TRUCK VALVE

• Specifically Designed for Cab Operation

• Provides smooth, Infinitely variable Lowering Control

• 160 Litre I Min Nominal Flow Capacity

• 240 Bar Maximum Working Pressure

• Dirt Tolerant Relief Valve

• Chrome Plated Spool

• Large Tank Galleries for Fast Lowering

41

List Price $587.00 

42

Part Number  Description List Price690222  OP‐APV‐16‐22 HOIST BLOCKING VALVE 1" BSP $440.00

GAUGE PORT OPTION $40.00

160 l/min 

43

Part No  Flow l/min  Voltage Ports  List Price 

690052  57  24  1/2”BSPP  $255.00

690053  115  24  ¾” BSPP  $316.00

690106  115  12  ¾” BSPP  $316.00

690107  57  12  1/2”BSPP  $255.00

Model  OP‐EHCV 

150 l/min Solenoid Operated Hoist Check Valve  PAGE No. 

Description In Line, direct acting, solenoid operated hoist check valve, for use in block or load holding. 

Operation 

To raise pressure flows from port 1 to port 2 To lower flow goes from port 2 to port 1. 

Features Hardened seats for long life and low leakage and low pressure drop. Manual override. 

Sizes 

Comes in two sizes, 57 l/min & 115 l/min 

57 l/min with ½”BSPP Ports 

115 l/min with ¾” BSPP Ports 

12 or 24 volt Deutsch Coils 

44

Cetop 3 & OP112 Bar Manifolds 

Oilpath offer a large range and standard cetop manifolds in aluminum and steel. There is an option for either a direct acting or pilot operated relief valves. These competitively priced manifolds are also supplied in Cetop 3, Cetop 5  in either  the standard parallel circuit or with the series circuit. They are supplied with BSPP Ports including a gauge or test port. 

Please contact the factory for pricing and availability 

Cetop 3 Valves, Oilpath no longer manufacture these valves in Australia as the economy of scale does not exist, however Oilpath can supply competitively priced imported product. 

45

Model  OP111 

OP111 CETOP 3 SUBPLATES  Page No. 

OP111 CETOP 3 & 5 SUBPLATES 

Mounting interface Cetop 3 or Cetop 5 Manufactured from high grade aluminum alloy and Dura‐ 

bar Maximum operating pressure 245 bar for Alloy Maximum operating pressure 345 bar for Dura‐Bar Side outlet, Bottom Outlet available

46

CETOP 3 SUB‐PLATE OPTIONS 

Part Number    Description  List  

Price 

OP111‐A    Single Cetop 3 alloy sub‐plate, side ported 3/8”BSPP   $79.00

OP111‐A‐C     Single Cetop 3 cast iron as above but for 350 bar  $105.00

OP111‐B     Single Cetop 3 alloy sub‐plate, rear ported 3/8” BSPP  $110.00

OP111‐B‐C     As above but produced in cast iron for 350 bar rating.   $167.00

OP111‐N     Single Cetop 3 alloy sub‐plate, inline ported 3/8”BSPP 40 l/min. Sub‐plate with Direct Acting Pressure Relief Valve    $110.00

OP111‐R     Cetop 3, Alloy, OP10 relief cartridge, 90 ‐ 210 bar 30 l/min. Sub‐plate with Direct Acting Pressure Relief Valve  $260.00

OP111‐A‐R‐*   

Cetop 3, Alloy, RV08‐20A‐0‐N relief cartridge, 2 ‐ 210 bar 40 l/min. Sub‐plate with Pilot Operated Pressure Relief Valve  $383.00

CETOP 5 SUB‐PLATE OPTIONS 

OP1115‐A    Single Cetop 5 alloy sub‐plate, side ported 1/2”BSPP   $121.00

OP1115‐A‐C Single Cetop 5 cast iron as above but for 350 bar  $121.00

OP1115‐B     Single Cetop 5 alloy sub‐plate, rear ported 1/2” BSPP  $152.00

OP1115‐B‐C    As above but produced in steel for 350 bar rating.   $341.00

Standard Valve Packages Oilpath provide a comprehensive HydraForce Valve Package Selector. This is available on  request or for download at www.oilpathhydraulics.com.au 

47

Custom Manifolds

At Oilpath we believe that better performance comes from working together, and our engineers and field representatives will work with you to design your custom hydraulic manifold. We understand that optimising the performance of your equipment starts with creative hydraulic integrated circuits. 

Manifolds can be manufactured in your specified materials including anodised aluminum, steel, cast iron, brass or stainless steel and can be plated to requirements. 

Please contact the factory to discuss your design requirements.

48

Model  OP101 

OP101 DOUBLE LOCK VALVE  Page No. 

OP101 DOUBLE LOCK VALVE 

Nominal Flow 12 gpm Max Working Pressure 3000 psi 210 Bar Pilot Ratio 3:1 Standard Port Size ½” BSPT OP101‐C for direct mounting on cylinders OP101‐I for in‐line applications Optional port sizes 3/8” BSPT & 3/4”UNF

Code No.  Description List PriceOP101‐C  Cylinder mounted with ½”BSPT ports $207.00OP101‐I  In‐Line with ½” BSPT ports $198.00Options 3/8” BSPT  All port machined 3/8” BSPT N/C3/4” UNF  All port machined 3/4” UNF N/COP101‐7  Piston fitted with ‘o’ ring $10.00

49

Model  OP110 

OP110 IN LINE RELIEF VALVE  Page No. 

OP110 THROUGH PORTED IN LINE RELIEF VALVE 

Manufactured from high grade aluminum Flow variations between 28 and 113 l/min Pressures from 50 to 5000 PSI Utilising world class HydraForce Relief Valve Cartridges In-line mounting style 3/8” & 1/2” BSPP porting options 

50

Model  OP110 

OP110 IN LINE RELIEF VALVE  Page No. 

PART NUMBER SELECTION TABLE

PART No. CARTRIDGE LINE BODY PART NO.

PRESSURE RANGE (PSI)

NOMINAL FLOW

List Price

11082005 RV08-20A-O-N-5 222121 (ALLOY) 50 - 600 23 l/min $169.0011082009 RV08-20A-O-N-9 222121 (ALLOY) 100 - 1300 23 l/min $169.0011082018 RV08-20A-O-N-18 222121 (ALLOY) 250 - 2600 23 l/min $169.0011082033 RV08-20A-O-N-33 222121 (ALLOY) 250 - 4000 23 l/min $169.0011002006 RV10-20A-O-N-6 222009 (ALLOY) 50 - 600 38 l/min $173.0011002012 RV10-20A-O-N-12 222009 (ALLOY) 150 - 1200 38 l/min $173.0011002023 RV10-20A-O-N-23 222009 (ALLOY) 250 - 2300 38 l/min $173.0011002033 RV10-20A-O-N-33 222009 (ALLOY) 250 - 3300 38 l/min $173.0011002604 RV10-26A-O-N-4 222009 (ALLOY) 100 - 400 113 l/min $183.0011002615 RV10-26A-O-N-15 222009 (ALLOY) 150 - 1500 113 l/min $183.0011002630 RV10-26A-O-N-30 222009 (ALLOY) 400 - 3000 113 l/min $183.0011052650 RV50-26A-O-P-50 222509 (STEEL) 400 - 5000 113 l/min $232.00

Steel Line Bo 

51

Model  OP115 

OP115 CROSS LINE RELIEF VALVE  Page No. 

OP115 CROSS LINE RELIEF VALVE 

Manufactured in Australia from high grade aluminum Flow variations between 28 and 113 l/min Pressures from 50 to 3000 PSI Utilising world class HydraForce Relief Valve Cartridges In line mounting style SAE‐6 & SAE10 porting options

52

Model  OP115 

OP115 CROSS LINE RELIEF VALVE  Page No. 

PART NUMBER SELECTION TABLE

PART No. CARTRIDGE LINE BODY PART NO.

PRESSURE RANGE (PSI)

NOMINAL FLOW

List Price

11582005 RV08-20A-O-N-5 7070160 (ALLOY) 50 - 600 23 l/min $207.0011582009 RV08-20A-O-N-9 7070160 (ALLOY) 100 - 1300 23 l/min $207.0011582018 RV08-20A-O-N-18 7070160 (ALLOY) 250 - 2600 23 l/min $207.0011582033 RV08-20A-O-N-33 7070160 (ALLOY) 250 - 4000 23 l/min $207.0011502006 RV10-20A-O-N-6 7070170 (ALLOY) 50 - 600 38 l/min $236.0011502012 RV10-20A-O-N-12 7070170 (ALLOY) 150 - 1200 38 l/min $236.0011502023 RV10-20A-O-N-23 7070170 (ALLOY) 250 - 2300 38 l/min $236.0011502033 RV10-20A-O-N-33 7070170 (ALLOY) 250 - 3300 38 l/min $236.0011502604 RV10-26A-O-N-4 7070170 (ALLOY) 100 - 400 113 l/min $256.0011502615 RV10-26A-O-N-15 7070170 (ALLOY) 150 - 1500 113 l/min $256.0011502630 RV10-26A-O-N-30 7070170 (ALLOY) 400 - 3000 113 l/min $256.00

53

54

Oilpath stock and support a range of Source Motorised Flow Controls. Please contact the Factory for details and pricing. 

55

CORRIDORCONNECTIONS

0418 549 188nigel@corridorconnections.com.au

45 Cooinda Road,Beaconsfield, Victoria 3807www.corridorconnections.com.au

CORRIDORCONNECTIONS