previous lecture lennard-jones potential energy is applied to find the van der waals energy between...
TRANSCRIPT
![Page 1: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/1.jpg)
Previous Lecture• Lennard-Jones potential energy is applied to find the van
der Waals energy between pairs of atoms and for pairs within molecular crystals.
• Young’s (elastic) modulus for molecular crystals can be obtained from the force-distance relation derived from the L-J potentials.
• Response of soft matter to shear stress can be like both Hookean (elastic) solids and Newtonian (viscous) liquids
• Viscoelasticity can be described with a transition from elastic to viscous response with a characteristic relaxation time,
• An important relationship between the elastic and viscous components: = GMor 1/Je = /)
![Page 2: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/2.jpg)
PH3-SM (PHY3032)
Soft Matter Physics
Lecture 4
Time Scales, the Glass Transition and Glasses
25 October, 2011
See Jones’ Soft Condensed Matter, Chapt. 2 and 7
![Page 3: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/3.jpg)
Response of Soft Matter to a Step Strain
time
Constant shear strain applied
Stress relaxes over time as molecules re-arrange:
eqGγσ viscoelastic solid
viscoelastic liquid
time
Hookean
Newtonian
τt
M eγGtσ-
)(
![Page 4: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/4.jpg)
Response of Soft Matter to a Constant Shear Stress
t
s
s ttJ )(
)(
Elastic response
Viscous response
(provides initial and recoverable strain)
(strain increases linearly over time)
Slope:
ησ
γ
σ
γ
dt
d 1)(
Jeq
Steady-state compliance, Jeq= 1/Geq
In the Maxwell model, Geq = /
So, = Jeq and Jeq = /
What is the physical reason for and ?
![Page 5: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/5.jpg)
Simulation of 32 Hard Smooth Particles in a Box
Alder and Wainwright, J. Chem. Physics (1959) 31, 459.
Solid: particles vibrate on a lattice
Liquid: particles are “caged” but can occasionally swap places.
![Page 6: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/6.jpg)
Relaxation and a Simple Model of Viscosity
» When a “simple” liquid is subjected to a shear stress, immediately the molecules’ positions are shifted, but the same “neighbours” are kept.
• Thereafter, the constituent molecules re-arrange to relax the stress, and the liquid begins to flow.
• A simple model of liquids imagines that relaxation takes place by a hopping mechanism, in which molecules escape the “cage” formed by their neighbours.
• Molecules in a liquid vibrate with a frequency, , comparable to the phonon frequency in a solid of the same substance (kT/h, where h is Planck’s constant).
• Thus can be considered a frequency of attempts to escape a cage.• But what is the probability that the molecule will escape the cage?
F
![Page 7: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/7.jpg)
0
Molecular configuration
Potential
Energy
(per molecule)
Intermediate state: some molecular spacings are greater: thus higher w(r)!
)_exp(1
kTf
The frequency, f, at which the molecules overcome the barrier and relax is an exponential function of temperature, T.
Molecular Relaxation in Simple Viscous Flow
![Page 8: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/8.jpg)
Molecular Relaxation Times• is the energy of the higher state and can be considered an energy barrier
per molecule. It is related to the energy required to “push apart” neighbouring molecules and hence is proportional to the cohesive energy.
• Typically, 0.4 Lv/NA, where Lv is the heat of vapourisation per mole and NA is the Avogadro number (= number of molecules per mole).
• A statistical physics argument tells us that the probability P of being in the high energy state is given by the Boltzmann distribution:
P exp(-/kT)• T is the temperature of the reservoir. As T 0, then P 0, whereas when
T, then P 1 (= 100% likelihood).• Eyring proposed that the frequency of successful escapes, f, is then the
product of the frequency of attempts () and the probability of “success” (P):
)_exp(= kTf
The time required for a molecule to escape its cage defines a molecular configurational relaxation time, config, which is comparable in magnitude to
the macroscopic stress relaxation time, . And so, config = 1/f.
![Page 9: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/9.jpg)
Arrhenius Behaviour of Viscosity• In liquids, the relaxation time, , is very short, varying between 10-12 and
10-10 s. Hence, as commonly observed, stresses in liquids are relaxed nearly instantaneously.
• In melted polymers, can be on the order of several ms or s. Whereas in solids, is very large, such that flow is not observed on realistic time scales.
• We can approximate that Geq, where Geq is the equilibrium shear modulus of the corresponding solid. Hence an expression for can be found from the Eyring relationship:
)exp(kT
ε
ν
GτGη eq
eq
)exp(RT
E
ν
GτGη eq
eq
Alternatively, an expression based on the molar activation energy E can be written:
This is referred to as an Arrhenius relationship.
![Page 10: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/10.jpg)
Non-Arrhenius Temperature Dependence
• Liquids with a viscosity that shows an Arrhenius dependence on temperature are called “strong liquids”. An example is melted silica.
• “Fragile liquids” show a non-Arrhenius behaviour that requires a different description. An example is a melted polymer.
• The viscosity of a melted polymer is described by the Vogel-Fulcher (VF) relationship:
• We see that diverges to , as the liquid is cooled towards To. It solidifies as temperature is decreased. In the high-temperature limit, approaches o - a lower limit.
where B and To are empirical constants. (By convention, the units of temperature here are usually °C!)
)exp(=o
o TTB
![Page 11: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/11.jpg)
Temperature-Dependence of Viscosity
P = Poise = 0.1 Pa-s
Arrhenius
Vogel-Fulcher
Viscosity Relaxation Time
![Page 12: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/12.jpg)
Temperature-Dependence of Polymer Viscosity
G. Strobl, The Physics of Polymers, 2nd Ed. (1997) Springer, p. 229
0
expTT
BA
Viscosity above Tg:
T0 Tg – 50 C
Tg
1 Pa-s = 10 Poise
![Page 13: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/13.jpg)
Configurational Re-Arrangements
• As a liquid is cooled, stress relaxation takes longer, and it takes longer for the molecules to change their configuration, as described by the configurational relaxation time, config.
• From the Vogel-Fulcher equation, we see that:
)-
exp(~oeq
oconfig TT
B
G
We see that the relaxations become exceedingly slow ( becomes v. large) as T decreases towards To.
![Page 14: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/14.jpg)
Experimental Time Scales• To distinguish a liquid from a solid, flow must be observed on an
experimental time scale, exp. A substance can appear to be a solid on short time scales but a liquid on long time scales!
• For example, if a sample is being cooled at a rate of 1 K per min., then exp is ~1 min. at each temperature increment.
Debonding an Adhesive
Flow can be observed on the time scale of the experiment, exp, because exp > config.
![Page 15: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/15.jpg)
Oscillatory StrainApply a shear strain at an angular frequency of = 2/exp. This defines an experimental timescale.
t
2/
)sin( tωγγ o
Dynamic mechanical analysis
![Page 16: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/16.jpg)
Hookean versus Newtonian Responses
t
tt
Hookean: Stress is in phase
t
)sin()( tωγGtσ o
t
tt
2
Newtonian: Stress is /2 out of phase
t
)2sin()( πtωωηγtσ o
2
Stress set by the shear modulus, G.
Stress set by the viscosity, .
![Page 17: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/17.jpg)
Response of a Viscoelastic Material
Stress oscillates at the same frequency as the strain, but it leads the strain by a phase angle, :
)sin()( δtωσtσ o
The relative values of the viscous and the elastic components depend on the time-scale of the observation (exp = 2/) in relation to the relaxation time: = Jeq
If exp > : the material appears more liquid-like
If exp < : the material appears more solid-like
![Page 18: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/18.jpg)
The Glass Transition• At higher temperatures, exp > config, and so flow is observed on
the time scale of the measurement.
• As T is lowered, config increases.
• When T is decreased to a certain value, known as the glass transition temperature, Tg, then config ~ exp.
• Below Tg, molecules do not change their configuration sufficiently fast to be observed during exp. That is, exp < config. The substance appears to be solid-like, with no observable flow.
• At T = Tg, is typically 1013 Pa-s. Compare this to = 10-3 Pa-s for water at room temperature.
![Page 19: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/19.jpg)
An Example of the Glass Transition
Video: Shattering polymer
![Page 20: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/20.jpg)
Temperature
Viscosity,
Tg
1013
Pa-s
![Page 21: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/21.jpg)
Competing Time Scales
Reciprocal Temp., 1/T (K-1)
Log(1/)
=1/vib
f = 1/config
1/exp
1/Tg
config < exp
config > exp
Melt (liquid)
Glass (solid)
Molecular conformation does not change when passing through the glass transition.
![Page 22: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/22.jpg)
Effect of Cooling Rate on Tg
• Tg is not a constant for a substance.
• When the cooling rate is slower, exp is longer.• For instance, reducing the rate from 1 K min-1 to 0.1 K min-1,
increases exp from 1 min. to 10 min. at each increment in K.• With a slower cooling rate, a lower T can be reached before
config exp.
• The result is a lower observed Tg.• Various experimental techniques have different associated
exp values. Hence, a value of Tg depends on the technique used to measure it and the frequency of the sampling.
![Page 23: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/23.jpg)
Are Stained-Glass Windows Liquid?
Window in the Duomo of Siena
Some medieval church windows are thicker at their bottom.
Is there flow over a time scale of exp 100 years?
y
vs
Viscosity relates a velocity gradient to a shear stress.
![Page 24: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/24.jpg)
Thermodynamics of Phase Transitions• At equilibrium, the phase with the lowest Gibbs’ free energy will
be the stable phase.• How can we describe this transition?
ba
The “b” phase is stable below the critical temperature, Tc.
Tc
![Page 25: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/25.jpg)
Temperature, T
Free
ene
rgy,
G
Free Energy of the Melting/Freezing Transition
Crystalline state
Liquid (melt) state
Tm
• Below the melting temperature, Tm, the crystalline state is stable.
• The thermodynamic driving force for crystallisation, G, increases when cooling below Tm .
• During a transition from solid to liquid, we see that (dG/dT)P will be discontinuous.
G
Undercooling, T, is defined as Tm – T.
![Page 26: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/26.jpg)
Classification of Phase Transitions
• A phase transition is classified as “first-order” if the first derivative of the Gibbs’ Free Energy, G, with respect to any state variable (P,V, or T) is discontinuous.
• An example - from the previous page - is the melting transition.
• In the same way, in a “second-order” phase transition, the second derivative of the Gibbs’ Free Energy G is discontinuous.
• Examples include order-disorder phase transitions in metals and superconducting/non-SC transitions.
![Page 27: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/27.jpg)
Thermodynamics of First-Order Transitions
• Gibbs’ Free Energy, G: G = H-ST so that dG = dH - TdS - SdT
• Enthalpy, H = U + PV so that dH = dU + PdV + VdP
• Substituting in for dH, we see: dG = dU + PdV + VdP - TdS - SdT
• The central equation of thermodynamics tells us: dU = TdS - PdV
• Substituting for dU, we find: dG = TdS - PdV + PdV + VdP - TdS - SdT
Finally, dG = VdP-SdT
H = enthalpy
S = entropy
U = internal energy
![Page 28: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/28.jpg)
Thermodynamics of First-Order Transitions• dG = VdP - SdT• In a first order transition, we see that V and S must be discontinuous:
TPG
V
S
TG
P
V
T
liquid
crystalline solid
Tm
Viscosity is also discontinuous at Tm.
There is a heat of melting, and thus H is also discontinuous at Tm.
(Or S)
![Page 29: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/29.jpg)
Thermodynamics of Glass Transitions
V
T
Crystalline solid
Tm
Liquid
Glass
Tg
![Page 30: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/30.jpg)
Thermodynamics of Glass Transitions
V
TTm
Glass
Crystalline solid
Liquid
Tg
Faster-cooled glass
Tfcg
Tg is higher when there is a faster cooling rate.
We see that the density of a glass is a function of its “thermal history”.
![Page 31: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/31.jpg)
Determining the Glass Transition Temperature in Polymer Thin Films
Poly(styrene)
ho ~ 100 nm
Tg
Melt
Glass
Keddie et al., Europhys. Lett. 27 (1994) 59-64
~ Thickness
![Page 32: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/32.jpg)
Is the Glass Transition Second-Order?
• Thus in a second-order transition, CP will be discontinuous.• Recall that volume expansivity, , is defined as:
Po T
V
Vβ
1
And V = (G/P)T. So,
Expansivity is related to a second differential of G, and hence it is likewise discontinuous in a second-order phase transition.
PTo
TP
G
Vβ
/1
• Note that S is found from -(G/T)P. Then we see that the heat capacity, Cp, can be given as:
PPP T
GT
T
STC
2
2
![Page 33: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/33.jpg)
Experimental Results for Poly(Vinyl Acetate)
“Classic” data from Kovacs
Po T
V
V
1
Expansivity is not strictly discontinuous – there is a broad step.
Note that Tg depends on the time scale of cooling!
![Page 34: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/34.jpg)
Data from H. Utschick, TA Instruments
Glass Transition of Poly(vinyl chloride)
Heat flow heat capacity
T
75.06°C(H)0.3804J/g/°CH
eat F
low
(W
/g)
20 40 60 80 100
Temperature (°C)
Sample is heated at a constant rate. Calorimeter measures how much heat is required.
Heat capacity is not strictly discontinuous – the step occurs over about 10 C.
![Page 35: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/35.jpg)
Structure of Glasses
• There is no discontinuity in volume at the glass transition and nor is there a discontinuity in the structure.
• In a crystal, there is long-range order of atoms. They are found at predictable distances.
• But at T>0, the atoms vibrate about an average position, and so the position is described by a distribution of probable interatomic distances, n(r).
![Page 36: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/36.jpg)
Atomic Distribution in Crystals12 nearest neighbours
And 4th nearest!
FCC unit cell (which is repeated in all three directions)
![Page 37: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/37.jpg)
Comparison of Glassy and Crystalline Structures
2-D Structures
Going from glassy to crystalline, there is a discontinuous decrease in volume.
Local order is identical in
both structures
Glassy (amorphous) Crystalline
![Page 38: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/38.jpg)
Simple Liquid Structure
r r = radial distance
![Page 39: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/39.jpg)
Structure of Glasses and Liquids• The structure of glasses and liquids can be described by a
radial distribution function: g(r), where r is the distance from the centre of a reference atom/molecule.
• The density in a shell of radius r will have atoms per volume.
• For the entire substance, let there be o atoms per unit volume. Then g(r) = (r)/o.
• At short r, there is some predictability of position because short-range forces are operative.
• At long r, (r) approaches o and g(r) 1.
![Page 40: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/40.jpg)
R.D.F. for Liquid ArgonExperimentally, vary a wave vector:
sin=||
4q
Scattering occurs when:
(where d is the spacing between scatterers).d
q2
=||
Can vary either or in experiments
![Page 41: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/41.jpg)
R.D.F. for Liquid Sodium Compared to the BCC Crystal: Correlation at Short Distances
4r2(r)
r (Å)
3 BCC cells
Each Na has 8 nearest neighbours.
![Page 42: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/42.jpg)
Entropy of Glasses• Entropy, S, can be determined experimentally from integrating
plots of CP/T versus T (since Cp = T(S/T)P)
• The disorder (and S) in a glass is similar to that in the melt. Contrast this case to crystallisation in which S “jumps” down at Tm.
• Since the glass transition is not first-order, S is not discontinuous through the transition.
• S for a glass depends on the cooling rate.• As the cooling rate becomes slower, S of the glass becomes lower.• At a temperature called the Kauzmann temperature, TK, we expect
that Sglass = Scrystal.• Remember that the structure of a glass is similar to the liquid’s,
but there is greater disorder in the glass compared to the crystal of the same substance.
![Page 43: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/43.jpg)
Kauzmann Paradox
Crystal
Glass
Melt (Liquid)
![Page 44: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/44.jpg)
Kauzmann Paradox• Sglass cannot be less than Scrystal because glasses are more disordered!
• Yet by extrapolation, we can predict that at sufficiently slow cooling rate, Sglass will be less than Scrystal. This prediction is a paradox!
• Paradox is resolved by saying that TK defines a lower limit to Tg as assumed in the V-F equation.
• Experimentally, it is usually found that TK To (V-F constant). Viscosity diverge towards when T is reduced towards TK. Typically, Tg - To = 50 K.
• This is consistent with the prediction that at T=To, config will go to .
• Tg equals TK (and To) when exp is approaching , which would be obtained via an exceedingly slow cooling rate.
![Page 45: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/45.jpg)
Problem Set 21. Calculate the energy required to separate two atoms from their equilibrium spacing ro to a very large distance apart. Then calculate the maximum force required to separate the atoms. The pair potential is given as w(r) = - A/r6 + B/r12, where A = 10-77 Jm6 and B = 10-134 Jm12. Finally, provide a rough estimate of the modulus of a solid composed of these atoms.
2. The latent heat of vaporisation of water is given as 40.7 kJ mole -1. The temperature dependence of the
viscosity of water is given in the table below. (i) Does the viscosity follow the expectations of an Arrhenius relationship with a reasonable activation energy?(ii) The shear modulus G of ice at 0 C is 2.5 x 109 Pa. Assume that this modulus is comparable to the instantaneous shear modulus of water Go and estimate the characteristic frequency of vibration for water, .
Temp (C) 0 10 20 30 40 50(10-4 Pa s) 17.93 13.07 10.02 7.98 6.53 5.47
Temp (C) 60 70 80 90 100(10-4 Pa s) 4.67 4.04 3.54 3.15 2.82
3. In poly(styrene) the relaxation time for configurational rearrangements follows a Vogel-Fulcher law given as
= o exp(B/T-To),
where B = 710 C and To = 50 C. In an experiment with an effective timescale of exp = 1000 s, the glass transition temperature Tg of poly(styrene) is found to be 101.4 C. If you carry out a second experiment with exp = 105 s, what value of Tg would be obtained?
![Page 46: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/46.jpg)
![Page 47: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/47.jpg)
Liquid Crystals
Rod-like (= calamitic) molecules
Molecules can also be plate-like (= discotic)
![Page 48: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/48.jpg)
LC Phases
Isotropic
Nematic
Smectic
Temp. Density
The phases of thermotropic LCs depend on
the temperature.
N = director
Attractive van der Waals’ forces are
balanced by forces from
thermal motion.
![Page 49: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/49.jpg)
Order in LC Phases
Isotropic
Nematic
Smectic
DensityN = directorOrientational Positional
None
High
High
High
None
weak
1-D
1-D
![Page 50: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/50.jpg)
LC Characteristics• LCs exhibit more molecular ordering than liquids, although not
as much as in conventional crystals.
• LCs flow like liquids in directions that do not upset the long-ranged order.
When there is a shear stress along the director, a nematic LC will flow.
In a “splay” deformation, order is disrupted, and there is an elastic response with an elastic constant, K
From RAL Jones, Soft Condensed Matter
![Page 51: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/51.jpg)
LC Orientation
Distribution function, f()
Director
N N
n
Higher order
Lower order
0
![Page 52: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/52.jpg)
Order Parameter for a Nematic-Isotropic LC Transition
Discontinuity at Tc: Therefore, a first-order transition
Isotropic
Nematic
S
The molecular ordering in a LC can be described by a so-called order parameter, S:
1
0
With the greatest ordering, = 0° and S = 1.
dfS )()1cos3(21
= 2∫
The order parameter is determined by the minimum in the free energy, F. Disordering increases S and decreases F, BUT intermolecular energies and F are decreased with ordering.
![Page 53: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/53.jpg)
From RAL Jones, Soft Condensed Matter, p. 111
Experimental Example of First-Order Nematic-Isotropic Transition
Data obtained from birefringence measurements (circles) and diamagnetic
anisotropy (squares) of the LC p-azoxyanisole.
Tc
![Page 54: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/54.jpg)
sin4
=2
=d
q
Scattering Experiments
d= molecular spacing
![Page 55: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/55.jpg)
Diffraction from LC Phases
L
a
Lq
2=
aq
2=
sin4
=2
=d
q
nematic
isotropic
smectic
![Page 56: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/56.jpg)
Polarised Light Microscopy of LC Phases
Nematic LC
Why do LCs show birefringence?
(That is, their refractive index varies with direction in the substance.)
![Page 57: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/57.jpg)
Birefringence of LCs• The bonding and atomic distribution along the longitudinal axis
of a calamitic LC molecule is different than along the transverse axis.
• Hence, the electronic polarisability (o) differs in the two directions (longitudinal (l) versus transverse (t)).
• Polarisability in the bulk nematic and crystalline phases will mirror the molecular.
• The Clausius-Mossotti equation relates the molecular
characteristic to the bulk property ( or n2):
43
)21
(4
v
o
t
In the isotropic phase: )+(= tiso 231
With greater LC ordering, there is more birefringence.
![Page 58: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/58.jpg)
Isotropic Nematic Perfect nematic
N
nn
tnn
N
tnn
isonn
isonn
nnnt
nnnt
S = 1
S = 0
0< S <1
![Page 59: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/59.jpg)
Crossed polarisers
Crossed Polarisers Block Light Transmission
http://www.kth.se/fakulteter/TFY/kmf/lcd/lcd~1.htm
![Page 60: Previous Lecture Lennard-Jones potential energy is applied to find the van der Waals energy between pairs of atoms and for pairs within molecular crystals](https://reader036.vdocuments.mx/reader036/viewer/2022062516/56649e505503460f94b476ed/html5/thumbnails/60.jpg)
http://www.kth.se/fakulteter/TFY/kmf/lcd/lcd~1.htm
Twisted nematic LC:
No applied field and light is transmitted
E > Ecrit:
Light is blocked
Liquid Crystal Displays
The director rotates by 90° going from the top to the bottom of the LC.
A strong field aligns the LC director in the same direction - except along the surfaces.
d
2/1)(2
icrit Kfd
E