Preventive Maintenance

System

What is PMS?

Preventative maintenance is about performing maitenance on a piece of equipment to minimize the risk of failure. Preventative maintenance is performed even if the equipment is working, so that it does not break down unexpectedly.

Why eresource PMS ?

• eresource Preventive Maintenance System helps you to work at full efficiency creating profitable uptime, while reducing downtime.

• Reduces the chances of complete machine breakdowns.

• Problems are recognized earlier with a preventive maintenance plan.

• Reduces the chance of emergency repair calls.

• Preventive maintenance will reduce the possibility of unnecessary repairs.

• Reduces late deliveries that may occur due to down-time machinery.

Benefits

Extended Equipment Life

Saving on Repair

Minimize FailureRiskPMS

Module

PMS

Job Card Stop Card Breakdown

Dashboard

DashboardThe main screen of PMS is the Dashboard. Dashboard would give visibility of all activities on-board, likewise Maintenance Activity Pending today, Activities Pending till date, maintenance schedule, Person on board, Stop Card Issues , Health and Safety, asset breakdown – Everything on single DashBoard

Job CardPreventive Maintenance job card in which details of a job to be performed is captured. It is used as a means to authorise and instruct the Maintenance People to take up the Maintenance work. The content and formats of the job card are all populated from the Asset Master. Activity Name is poulated from the

Pre-defined Maintnenance activity defined in the Asset Master.

Standard Observation, Lower Limit, Upper Limit and Tolerance is also populated as per the standards defined in the Asset Master.

Last Observed Date: is the Observation ityduring the Last Maintenance performed

Dated On: Shows the last date when the Activity was performed

Actual Observation. Capture here the Observation and Activity description performed now.

Start time and End Time: This is specific to the activity.

Status : Select the status. Status can be Open/Completed OR in-progress.

Stop Card

The STOP program is a behavior-based safety program. It is designed to prevent injuries and occupational illnesses in the workplace. This form is used to capture the details of observation ,observer, location, and you can also keep record of action took place for the observation

Break Down TicketThis is a form where you can log the asset breakdown ticket

Let's get Social

www.eresourceerp.compms.eresourceerp.comhrms.eresourceerp.comnfra.eresourceerp.com

Registered Office: eresource Infotech Private Limited, TMA House 1st floor, Road No. 16, Plot No. 6,Wagle Estate ,Thane (West) Tel: +91 22 41118000 to +91 22 41118050 (50 Lines)

Dubai P O Box 52034, Dubai UAE Mobile Number: 0097155 9018499 Email: sn@eresourceinfotech.com