prestige equipment auctions / holland industrial group

Prestige Equipment Auctions / HollandIndustrial Group

Surplus to Ongoing Operations of Marelli USA – CompleteMachining & Die Casting Facility

Started Nov 11, 2021 10am ET (3pm GMT)

Sanford

North Carolina

27330

United States

Lot Description

1Mart Tornado 60 Heavy Duty Carousel Style Parts Washer, 64'' W x 60'' L, With Swing Out Carousel, 397 Total Reservoir Gallons, S/N

8150, New 2007, 460/3/60 Electrics (Location: Die Repair)

2 OTC Model B "Roll Bed" 100-Ton Capacity H-Frame Press, 100 Ton Ram, 700 Bar, 15,000 PSI, S/N 405421 (Location: Die Repair)

3Greenerd HCA-30-30RS 30-Ton Straightening Press, 24'' W x 36'' L T-Slotted Bed, 22'' Shut Height, With Greenerd Digital Display, 205

Gal., S/N SST5449 (Location: Die Repair)

4

2012 Colosio PFO 850 Horizontal Cold Chamber Aluminum High Pressure Die Cast Machine, S/N 1763, 785-Ton Nominal Closing

Force, 850-Ton Die Locking Force, 6.70" Tie Bar Diameter, 31.50" x 31.50'' Clearance Between Tie Bars, 15.74-37.41" Max. Die

Thickness, 15.75"-29.53'' Die Stroke, 50" x 50'' Moving ...[more]

5 Dynarad EG1500 Melting And Holding Furnace, Approx. 74.36 Gallons, 38'' W x 25'' D, S/N 953 (Location: Die Cast Department)

6 Comau Foundry Robotic 6-Axis Robotic Arm With (1) Comau Robotics Controller (Location: Die Cast Department)

7

2012 Diesse T25 NG +S 25-Ton Trim Press, S/N 2882/2012, 31.5'' Stroke, 4-Post, 32'' Shut Height, 45'' Table, 1100 Max. Upper Semi-

Die, 250/25 Working Force, Approx. 500 Speed Decent, 23 Liters/Min Effective Range Of Pump, 200 Working Pressure, 5 Working Bar

Pressure, 10 HP Motor, 480/3/60 Electrics, ...[more]

7A BULK BID OF LOTS 4-7

8

2012 Colosio PFO 850 Horizontal Cold Chamber Aluminum High Pressure Die Cast Machine, SN 1768, 785-Ton Nominal Closing

Force, 850-Ton Die Locking Force, 6.70" Tie Bar Diameter, 31.50" x 31.50'' Clearance Between Tie Bars, 15.74"-37.41'' Max. Die

Thickness Size, 15.75"-29.53'' Die Stroke, 50" x 50"' ...[more]

10 Comau Foundry Robotic 6-Axis Robotic Arm, With Comau Robotics Controller (Location: Die Cast Department)

11

2012 Diesse T25 NG +S 25-Ton Trim Press, S/N 2879/2012, 31.5'' Stroke, 25-Ton, 460 Volts, 50 Hz, 4- Post 32'' Shut Height, 45''

Table, 1100 Max. Upper Semi-Die, 250/25 Working Force, Approx. 500 Speed Decent, 23 Liters/min Effective Range Of Pump, 200

Working Pressure, 5 Working Bar Pressure, 10 HP, ...[more]

11A BULK BID OF LOTS 8-11

15

B&T 700-Ton Horizontal Cold Chamber Aluminum High Pressure Die Cast Machine, 700-Ton Capacity, 52'' x 52 '' Clearance Between

Tie Bars, 15.74 Min.-37.41'' Max. Die Thickness Size,600 Die Locking Pressure, 15.75"-29.53'' Die Stroke, 50" x 50" Moving Platen

Size, 0-9 Shot Positions, 25.59'' Shot S ...[more]

16 Dynarad EG1500 Melting & Holding Furnace, Approx. 74.36 Gallons, 38"W x 25"D, 480V, S/N 920 (Location: Die Cast Department)

17Advance Multi-Link, Helper-Side, Automatic Ladle, Equipped with Adjustable Height Pedestal with Tilting Head Capability Plus Optional

18 Inch Bottom Riser (Loc. Die Department)

18

Greenerd HCA-30-30R8 30-Ton Vertical Trim Press, Adjustable 6-30 Ton Of Ram, 36" x 24" Table, 14" Throat, 30" Daylight Maximum

Open Distance, 18'' Stroke, 35.6'' Floor to Table 6'' Clearance Between Ribs Under Press Bolster, 110'' Overall Height, 480V/3/60, S/N

97T5248 (Location: Die Cast Department ...[more]

19

Lester 700-Ton Horizontal Cold Chamber Aluminum High Pressure Die Cast Machine, 700-Ton 52'' x 52'' Clearance Between Tie Bars,

15.74"-37.4" Max. Die Thickness Size, 600 Die Locking Pressure, 15.75"-29.53" Die Stroke, 50" x 50" Moving Platen Size, 0-9 Shot

Positions, 25.59'' Shot Stroke, Hydraulic E ...[more]

20 Dynarad MS 500 Melting & Holding Furnace, Approx. 74.36 Gallons, 38"W x 25"D, S/N 611 (Location: Die Cast Department)

21Advance SL 1200 Multi-Link, Helper-Side, Automatic Ladle, Equipped with Adjustable Height Pedestal with Tilting Head Capability Plus

Optional 18 Inch Bottom Riser, 2300mm Horizontal X-Axis Stroke, 1300mm Y-Axis Stroke, (Location: Die Cast Department)

26

B & T 650-Ton Horizontal Cold Chamber Aluminum High Pressure Die Cast Machine, 650-Ton Locking Force, 6" Tie Bar, 30" Clearance

Between Tie Bars, 12"-36" Die Thickness, 21" Die Stroke, 50" x 50" Moving Platen Size, Center-6'' Shot Positions, 480V/3/60, Allen

Bradly SLC 5/03 Control, Plus Visi Tr ...[more]

27{ Group of lots: 27, 28 } Industrial Innovation Dosing Manipulator Ladle, 1250mm Vertical Stroke, Approx. 3100mm Max. Radius, 480V,

(Location: Die Cast Department)

28{ Group of lots: 27, 28 } Dynarad EC 1500 Electric Melting & Holding Furnace, 2000 Deg. F Max. Furnace Chamber Temp, Approx.

1200 Lb. Capacity, Approx. 74.36 Gallons, 38"W x 25"D, 480V, S/N 960 (Location: Die Cast Department)

302011 Wheelabrator Model A3-60981 Pass-Through MonorailShot Blast Machine, 43"W x 56"H Single Door Opening, 29 HP, 460V,

Approx. 10' Of Motorized Track S/N 3843, New 2011 (Location: Die Cast Department)

31

2018 Wheelabrator Model 11289607 Pass-Through MonorailShot Blast Machine, 10' x 36" Elevator 0.33 Spill Hopper, Approx. 25'

Rolling Conveyor, 4' Pass Height, 14" Opening With 67" x 40" x 56" Down Flow Hopper, S/N 601415, New 2018 (Location: Die Cast

Department)

32Wedron Flux Model Mobile De-Gasser, Height Adjustable 40'' Radius Arm, 25-375 RPM, 460V, S/N 3129RF (Location: Die Cast

Department)

33 { Group of lots: 33, 34 } (2) Deburring Tanks, 20" x 8" Openings, With Peerless Blowers (Location: Die Cast Department)

34 { Group of lots: 33, 34 } (2) Deburring Tanks, 20" x 8" Openings, With Peerless Blowers (Location: Die Cast Department)

35

Porta Solutions CNC Rotarty Transfer Machine, Model TRV-08-N-16-90-110/HSK50-HSK63-FMU, 8-Operating Stations, 150Nm Max.

Permitted Toque On Spindle, 1200N Max. Spindle Trust, 15000 Max Permitted Spindle RPM, 1.2 Max Weight Of Tool/Equipment Push

Road, A Vertical Axis Rotary Table Supported On Both S ...[more]

36

Cincinnati Milacron Maxim 500 Twin Pallet Horizontal Machining Center, Travels: X-29.5", Y-27.6", Z-29.5", Dual 19.7" x 19.7" Pallets,

B-Axis Indexing 1 Degree, 7000 RPM, CAT 50 Spindle Taper, 40 ATC Tool Changer, Siemens Acramatic 950 CNC Control, PanelView,

Turbo Chip Conveyor, Coolant Cooler HAF ...[more]

37

Cincinnati Milacron Sabre 1000 CNC Vertical Machining Center, Travels: X-40", Y-20", Z-22", With 44'' x 20'' Table, 60-8,000 RPM

Spindle Speed, 15 HP Spindle Motor, CAT 40 Spindle Taper, 21 ATC Tool Capacity, Nikken 2-Axis Rotary Trunnion Table, Cincinnati

Milacron Acramatic 2100 Panel View CNC Co ...[more]

38

{ Group of lots: 38, 38a } Cincinnati Maxim 500 CNC Twin Pallet Horizontal Machining Center, Travels: X-29.5", Y-27.6", Z-29.5", Dual

19.7" x 19.7" Pallets, B-Axis Indexing 1 Degree, 7000 RPM, CAT 50 Spindle Taper, 40 ATC Tool Changer, 33 HP, 1100 IPM Rapid

Traverse, Siemans Acramatic 950 PanelView ...[more]

38a { Group of lots: 38, 38a } Pallets & Tombstones For Cincinnati Maxims

39

Cincinnati HPC 500 XT CNC Twin Pallet Horizontal Machining Center, GE Fanuc Series 16i-M CNC Control, Travels: X-29.52", Y-

27.55", Z-29.52", Dual 19.7" x 19.7" Pallets, 1-Degree Pallet Indexing, 7000 RPM Spindle Speed, CAT 50, 40 ATC Tool Changer, 33 HP

Spindle Motor, 460V/3/60, S/N. KA00D03010007, ...[more]

40

2007 Makino A71 Horizontal Machining Center, S/N 632, Makino Pro-5 CNC Control, Travels: X-28.74", Y-28.7", Z-31.5", Dual 19.7" x

19.7" Pallets, Full B-Axis 0.001 Degree, 12,000 RPM Max. Spindle Speed, 60 ATC Tool Changer, CAT 50 Taper, With Chip Blaster

JV10 High Pressure Through Spindle Coolant, S ...[more]

40a Pallets & Tombstones For Makino A71

41

{ Group of lots: 41, 41a } Chiron DZ-15K-W 5-Axis CNC Twin-Spindle Vertical Machining Center, Fanuc 18iM CNC Control, Travels: X-

28.74", Y-15.75", Z-16.73", Dual Pallet, Rotary Pallet Changer, (2) CNC 2-Axis Trunnion Rotary Tables, 12,000 RPM, S/N 134-37,

Paper Filtration System, Hyfa VWK140-DE Co ...[more]

41a { Group of lots: 41, 41a } Fixtures For Chiron Pallets

42Proceco MB 18 X12-E-2W-2R-BO-SS Tunnel Parts Washer, 144"L x 12"W Opening, 25 Lb. Max. Belt Capacity, 460V/3/60, S/N 05-610

(Location: Machining Department)

43CAE Ransohoff H-2326 4-Tank Pass-Through Parts Washer With Conveyor, 28"W x 10"H Opening, Approx. 35' Of Conveyor, 4-Tanks

Ranging From 325 Gal., 70 Gal. And 250 Gal. 460V/3/60, S/N H2870 (Location: Machining Department)

44

JR Automation Technologies Fire Turbo Manifold Assembly, Consisting Of: 1- Allen-Bradley Plus 1000 PanelView Control; 1- Allen-

Bradley Plus 700 PanelView Control; 1- Cincinnati Sentinel C28 Test System; 1- Fanuc M-20iA 6-Axis Robot With Fanuc System R-30iB

Control, Fanuc Pendant; 2- 12"W x 7'L Con ...[more]

45{ Choice of lots: 45 } Test Station with Cleco mPro400 gc Primary Global Controller, 30'' Intelli-Arm With Hand held Torque Wrench,

Mounted To 35"W x 33"L Aluminum Fixture Plate, Allen-Bradley Plus 700 PanelView, (Turbo Department)

46{ Choice of lots: 46, 47, 48, 49, 50, 51 } Test Station with Cleco mPro400 gc Primary Global Controller, 30" Intelli-Arm Mounted To 35"

W x 33"L Aluminum Fixture Plate, Allen-Bradley Plus 700 PanelView, (Turbo Department)

47{ Choice of lots: 46, 47, 48, 49, 50, 51 } Test Station with Cleco mPro400 gc Primary Global Controller, 30" Intelli-Arm Mounted To 35"

W x 33"L Aluminum Fixture Plate, Allen-Bradley Plus 700 PanelView, (Turbo Department)

48 { Choice of lots: 46, 47, 48, 49, 50, 51 } Test Station With 21" W x 33" L Aluminum Fixture Plate (Turbo Department)

49{ Choice of lots: 46, 47, 48, 49, 50, 51 } Test Station With 42" x 40" Aluminum Fixture Table With Mounted Gage Tester, Allen-Bradley

Plus 700 PanelView Control, 120 Volt, (Turbo Department)

50{ Choice of lots: 46, 47, 48, 49, 50, 51 } Telesis Technologies Fuel Rail Assembly /Leak Tester, Mounted To Steel Top Fixture Plate,

With (1) Fuel Rail Pressing Station (Loc. Turbo Department)

51{ Choice of lots: 46, 47, 48, 49, 50, 51 } Shaft Spinner Test Station, Consisting Of: (1) Baltec RNE281 Grease Injection Nipple, 1680

RPM, With 48" x 24" Steel Top Fixture Plate, Allen-Bradley 550 PanelView Control, 440V, (Turbo Department)

52{ Group of lots: 52, 53, 54 } Cam Roller Bushing Press, With 48" x 24" Steel Top Fixture Plate, Allen-Bradley 300 Micro PanelView, (2)

26" Safety Light Curtains (Turbo Department)

53{ Group of lots: 52, 53, 54 } Valve Fixture Station, With 48" x 24" Steel Top Fixture Plate, Allen-Bradley 550 PanelView Control, 12" Cam

Plate, Torque Wrench, 33" Height Adjustable Radius Arm (Turbo Department)

54{ Group of lots: 52, 53, 54 } Valve Screw Staking Station, Consisting Of: (2) Various Size Steel Top Fixture Tables, (1) Allen-Bradley

mdl. 600 PanelView (4) 26'' L Safety Curtains, With Air Flow Station And 12'' W Monitor, (Turbo Department)

55 Torque Tester, With 9.50'' Lb. Open Torque, 47.5 Angle, Adjustable Throttle Actuator (Turbo Department)

56Thermotron S-1.2C Thermal Chamber, 12.5"D x 16"W x 11" H, 1 Ph, 40 AmPSI, 60 Hz, With Thermotron 2800 Programmer/Controller,

S/N 25084, (Maintenance Department)

57 Micro Craft ECU Tester With Electronic Control Unit Key Panel (Maintenance Department)

58 Espec EPX-4H Thermal Chamber, 40" W x 40" H x 36" D, 230V/50-60Hz, 230 Volt, 50-60 Hz, S/N 01IC725 (Maintenance Department)

59 Custom Built Flow Pump Flow Stand Unit, 0-70 PSI, 0-40 V/DC, 3 Gallon Tank (Maintenance Department)

60{ Group of lots: 60, 61 } Weber Master Flow Box 6 Unit, With 2-Post 45" Drop Dome 14" Clear Window View, HP Compaq LA2006x 20''

Computer Monitor, With Intrex Pro Disc Unit, (Maintenance Department)

61{ Group of lots: 60, 61 } Custom Built Shaft Spinner Test Station, Consisting of: (1) Baltec RNE281 Grease Injection Nipple, 440V 3Ph,

1680 RPM, With 48" x 24" x 24" Steel Top Fixture Plate, Allen-Bradley 550 PanelView Control (Location: Building 2 - Receiving)

62{ Group of lots: 62, 63 } Micro Hydraulic Main Metering Jet Secondary Operation Unit, 48" Round Steel Base With Fixture Mounts, With

Multi Senser, Built I Gemco Rotating Cam Limit Switch(Location: Building 2 - Receiving)

63

{ Group of lots: 62, 63 } Custom Built Volkswagen 4-Cell Water Tube Assembly Station, 3000 lb. Capacity Hydraulic Unit, Cincinnati

Sentinel mdl. C28 Test System (1) Allen-Bradley mdl. 550 PanelView Control Mounted To 40'' W x 70'' L Steel Fixture Plate, 8'' W x 36''

L Conveyor, With Clear Panel Enc ...[more]

64

Betech Model 4512 Custom Built Test Unit, With (1) Cincinnati Test System M24 Multi Station Leak Tester (1) Cincinnati Test System

Pressure Decay Control Unit, (1) Allen-Bradley mdl. 500 PanelView Control, Mounted To 60" x 60" Steel Table, Clear Panel Enclosure

And Fixtures (Location: Building 2 - R ...[more]

65 Custom Built Test Station, 48" x 36" Steel Table With Clear Enclosure, (2) 26" Safety Curtains (Location: Building 2 - Receiving)

66Custom Built Test Station, With Tech-Motive Tool Monitor/ Controller And Electric Wrench, 12'' Adjustable Arm Attached Rivet Gun,

Mounted To 4' W x 36'' L Steel Table Clear Enclosure, (2) 26'' L Safety Curtains (Location: Building 2 - Receiving)

67 Custom Built Test Station, 36" x 36" Steel Table With Clear Panel Enclosure And Fixture Mounts, (Location: Building 2 - Receiving)

68{ Group of lots: 68, 69, 70, 71 } Custom Built Test Station, 36" x 36" Steel Table With Clear Panel Enclosure And Fixture Mounts,

(Location: Building 2)

69 { Group of lots: 68, 69, 70, 71 } Custom Built Test Station, 48" x 36" Steel Table With Clear Enclosure, (Location: Building 2 - Receiving)

70{ Group of lots: 68, 69, 70, 71 } Custom Built Harley Davidson Fuel Pump Pneumatic System, 48" x 36" Steel Table Clear Enclosure, 60

PSI, Allen-Bradley 550 PanelView Control (Location: Building 2 - Receiving)

71{ Group of lots: 68, 69, 70, 71 } Custom Built Test Station, 24" x 36" Steel Table With Clear Enclosure And Fixture Mounts (Location:

Building 2)

72 { Group of lots: 72, 73 } Stromag Bowl Feeder Unit, 48" x 43" Steel Table With 19" Bowl Feeder (Location: Building 2 - Receiving)

73 { Group of lots: 72, 73 } (2) Pressure Decay Leak Tester Units, 100 PSI & 30 PSI Vacuum Pressure (Location: Building 2 - Receiving)

74 Autobag H-100 16''Automatic Packaging Unit (Location: Building 2 - Receiving)

75{ Group of lots: 75, 76, 77 } Great Lakes UE68 Package Machinery, Dual 10" W x 118" Long Rolling Conveyor Unit, With Vibrator

Feeder Unit (Location: Building 2)

76{ Group of lots: 75, 76, 77 } Alton Tool Perforate And Stamp Fixture Unit, 48" x 26" Aluminum Fixture Plate, 480 Volt, 60 Hz (Location:

Building 2 - Receiving)

77{ Group of lots: 75, 76, 77 } Versa Model Mini-Cutter II, Puller/Mini-Cutter, 150 Cuts Per/Min, 1140 RPM, 100' Max. Speed 1/8 Hp, 1 Ph,

60 Hz, 115 Volt (Location: Building 2 - Receiving)

78 (3) Accu-Count Package Counters, 22" Wide Counter, 2,500 Packages Per/Hour, 110 Volt, 80 PSI. (Location: Building 2 - Receiving)

79

Engel 60TL 60-Ton CNC Horizontal Plastic Injection Molder, Engle CNC Control, 60 Ton Capacity, 2.2 OZ. 25mm Shot, 25" x 16.93"

Platen Size, 13" Clamp Stroke, 7" Mold Height, 20" Daylight 20 HP, 480V, With Allen-Bradley 300 PanelView Control, And AECO TCO-

1 Temperature Control Unit, 480V, 100 PSI, S/ ...[more]

79a AEC Hot Water Temperature Control Unit

80Despatch LAC 2-12 LAC Bake Oven, 24"W x 36"H x 24"D, Max Temp 260 c/500 F., 3600 Watts, 240V, 60 Hz (Location: Building 2 -

Receiving)

81 { Group of lots: 81, 82, 83 (P) } Airflow Systems Fume Bath, 30"W x 32"H, 15 PSI, S/N 1032563 (Location: Building 2 - Receiving)

82 { Group of lots: 81, 82, 83 (P) } Airflow Systems Fume/Dust Collector, 7' Extension Hose (Location: Building 2 - Receiving)

83 { Group of lots: 81, 82, 83 (P) } Airflow Systems Dust Collector, 7' Extension Hose (Location: Building 2 - Receiving)

84

Engel Model 85 CNC Vertical Plastic Injection Molder, 3-Ton Opening Clamp, 11" Clamp Stroke, 11"-22" Mold Height, 21" x 13" Plate

Size, 38'' Rotary Table, 5" Ejector Stroke, 2-Ton Ejector Force, 44 Lb. Hopper Capacity, 3000 PSI Injection Pressure, 480V/3/60, S/N

8979-085-97, With Regal 2000 HE, Temp ...[more]

84a Advantage Hot Water Temperature Control Unit

85

Engel Model 85 CNC Vertical Plastic Injection Molder, 3-Ton Opening Clamp, 11" Clamp Stroke, 11"-22" Mold Height, 21" x 13" Plate

Size, 38'' Rotary Table, 5" Ejector Stroke, 2-Ton Ejector Force, 44 Lb. Hopper Capacity, 3000 PSI Injection Pressure, 480V/3/60, S/N

8978-085-97 (Location: Building 2 - R ...[more]

86Custom Built Surge Tester, 48" W x 52" L Clear PanelView, 31'' Round Fixture Plate, Allen-Bradley 600, PanelView (Location: Building 2

- Receiving)

87Nikon Model VM-150 CNC Video Measuring System, X-Axis 300mm, Y-Axis 300mm, Z-Axis 150mm Stroke (Location: Building 2 -

Receiving)

88Sintech Model QT/5 Tensile Strength Test System, 120V, 508mm/ M Speed Clutch S/N 181310/092297 (Location: Building 2 -

Receiving)

89Wilton Model 2704 Drill Press, 45° Tilting Capacity with Mounting Grooves, 5/8" Drill Chuck & Arbor, 3-1/8" Stroke (Location: Building 2 -

Receiving)

90Leica M651 Microscope, 65mm Field-Of-Vew & Spot Illumination, 5-Step Magnification (4X, 6X, 10X, 16X, 25X), Fine Focus, With Sony

12" Monitor (Location: Building 2 - Receiving)

91{ Choice of lots: 91, 92, 93 } Leica M651 Microscope, 65mm Field-Of-Vew & Spot Illumination, 5-Step Magnification (4X, 6X, 10X, 16X,

25X), Fine Focus, (Location: Building 2 - Receiving)

92{ Choice of lots: 91, 92, 93 } Leica M651 Microscope, 65mm Field-Of-Vew & Spot Illumination, 5-Step Magnification (4X, 6X, 10X, 16X,

25X), Fine Focus, With Sony 12" Monitor (Location: Building 2 - Receiving)

93{ Choice of lots: 91, 92, 93 } Leica M651 Microscope,65 mm field-of-view and spot illumination,5-step magnification (4x, 6x, 10x, 16x,

and 25x), fine focus (Location: Building 2 - Receiving)

93a { Group of lots: 93a, 93b, 93c } Nikon SMZ-U Steroscopic Zoom Microscope, Nikon XN Transformer

93b { Group of lots: 93a, 93b, 93c } Diatest Gauge with Mitutoyo Digimatic Indicator

93c{ Group of lots: 93a, 93b, 93c } Sonitek Basic S5 Spectrum Thermal Heat Staking Bench-top Pneumatic Press, Model SB-5 4.4, S/N

8000-0192

93d American MSI Corporation Cyclone 4000 Vacuum System, Model CVC-4000, S/N 9500026

93e Greenerd No. 3 Arbor Press

93f Conair MDC7.5-SC-D Carousel Dryer, Vacuum Loader & Hopper

93g Prosys TL 12 S Coil Winding/Welding System, S/N 02800, 1997

94 Selco Balers Model VS-HD Baler, 60" Opening, 6" Cylinder, 10 HP, SN 100669504 (Outside)

95 { Group of lots: 95, 96, 97, 98, 99, 100 } (1) Skid Of Various Size Cast Iron Plates (Machining Department)

96 { Group of lots: 95, 96, 97, 98, 99, 100 } (1) Skid Of Northern Iron Various Size Die Cast Ladles (Machining Department)

97{ Group of lots: 95, 96, 97, 98, 99, 100 } (1) Skid Of Assorted Die Cast Tooling, To Include Various Size Slide TiPSI, Core Extension

Rods, Core Covers And Turn Key Tooling (Machining Department)

98 { Group of lots: 95, 96, 97, 98, 99, 100 } (1) Skid Of Various Size Screw Rods (Machining Department)

99{ Group of lots: 95, 96, 97, 98, 99, 100 } (1) Skid Of Assorted Contents To Include (1) 24'' x 15'' Ball Screw, (2) Transducer Shot Rods,

(2) Magnetostive Liner Position Sensors, (Machining Department)

100 { Group of lots: 95, 96, 97, 98, 99, 100 } (1) Skid Of Hydraulic Cylinders With Various Size Parker Valves (Machining Department)

101(1) Skid Of Assorted Contents To Include Various Size Piston for Position Cylinders, Various Size Parker Valves, With (2) Machine

Cylinders, (Machining Department)

102(1) Skid Of Assorted Contents To Include Various Size Kit Rete, Machine Brushes, Handles For Window Codes, (Machining

Department)

103(1) Skid of Assorted Contents To Include (1) Lincoln 83167 C/M Pump 2-1/2" Air Motor, 1/8" NPTF Air Inlet, Vertical Mounting Position,

(1) Lubmax Grease Unit , (1) Positioning Unit, (Machining Department)

104(1) Skid Of Assorted Contents To Include Set Of Wheel Blast Blades, Labeling Cartridge, 18" Valves, And Pipe Rings (Machining

Department)

105(1) Skid Of Assorted Contents To Include Various Size Safety Curtains, (1) Mold Flow Regulators For Plastic Injection Molding Machine,

With (1) Rittal Enclosure Cooling Unit (Machining Department)

106 (1) Skid Of Assorted Die Cast Tooling With Wheel / Bare Blades (Machining Department)

107(2) Skid Of Various Size Brass Pipe Flanges, With Rod Flanges, Pipe Connectors And Centering Wheelabrators (Machining

Department)

108(1) Skid Of Assorted Contents, To Include Ring Nuts, Festo DSRL-32-180-P-FW Semi-Rotary Drives, Pneumatic Sandwich Regulators,

Valve DumPSI and Guarnz Step Seals (Machining Department)

109 (1) Skid Of Assorted Contents, To Include Screws, Bolts, Gears, Wires Springs Etc. (Machining Department)

110 (1) Skid Of Assorted Various Size Seals, To Include Screws, Couplings And Gears (Machining Department)

111(1) Skid Of Assorted Contents, To Include Heating Rods, Ball Screws, (1) Heat Exchanger Unit And Thermocouples (Machining

Department)

112(1) Skid Of Assorted Contents, To Include Core Cover Half Dept Pins, Core Up Sweep Mounts, Core Right Sweep Mounts And Core

Ejector Side Centers(Machining Department)

113(1) Skid Of Various Size Injection Molder Tooling, Including Pullback Ejector Locks, Lock Pullback B Ejectors And Slide Carrier

Pullbacks (Machining Department)

114 (1) Skid Of Injection Molder Tooling, Including Various Size Slide Carrier For Motor Pockets (Machining Department)

115

Enerpac L2160 Hydraulic Enerpac Pump Set, With Cylinders Hand Pump, Hose And Gauge With Gauge Adaptor, Lock On ClamPSI,

Threaded Plunger Toe, Cylinder Collar Toe, Spreader, Serrated Saddle, Smooth Saddle, Double Chain Plate, Threaded Adaptor

Saddles, V-Base, Flat Base , Plunger Base, Wedge Head, Duc ...[more]

116{ Group of lots: 116, 117 } (2) Skids Of Assorted Contents To Include Seals, Cylinder Seals, Eaton Valves, Bearing, Stroke Master

Valves, (3) Boxes Of Premium MiG Welding Wire, Grinding Wheels, Batteries And Seal Sets (Machining Department)

117{ Group of lots: 116, 117 } (1) Skid Of Various Size Milling Tools To Include Reamer Motor Bores, Master Tech Diamonds Inserts

(Machining Department)

118{ Group of lots: 118, 119 } (1) Skid Of Assorted Contents To Include 30mm Push -Pull Devices 800T PB, Power Supply Dual Output

Switches (Machining Department)

119{ Group of lots: 118, 119 } (2) Skids Of Assorted ContentsTo Include Fanuc Parts, Gearbox And Motors, Switches, Cincinnati Parts,

Monitors Etc. (Machining Department)

120

{ Group of lots: 120, 121 } (1) Skid Of Assorted Contents D130To Include Multi Press Seals, CDK Valves, Industrial Filters, Hydraulic

Piston Accumulators, Parker mdl. RS-232 Switches, Eaton Contactors, Ortman Heavy-Duty Hydraulic Cylinders, Allen-Bradley Bulletin

Lights, Banner mdl. S18 Series Sens ...[more]

121{ Group of lots: 120, 121 } (1) Skid Of Assorted Contents To Include Altas DMC Digital Motion Controllers, Allen-Bradley mdl. SLC500

Processor Units, Orion Fans Switches, Allen- Bradley mdl. 2711-K6C8X Control PanelView (Machining Department)

122{ Group of lots: 122, 123 } (1) Skid Of Assorted Contents to Include (2) Cincinnati Milacron Control Units, (2) Casting Molds, Die

Machine Parts And (1) GSE Tech-Motive Tool Monitor/ Controller Unit (Machining Department)

123{ Group of lots: 122, 123 } (1) Skid Of Assorted Contents To Include Siemens Sensor Heads, MP Flitri Filter, Separation Water Filter

Unit And Greatlakes Wire And Cables, (Machining Department)

124 { Group of lots: 124, 125, 126 } (1) Skid Of Assorted Contents To Include Various Size Air Filters (Machining Department)

125{ Group of lots: 124, 125, 126 } (1) Skid Of Assorted Contents To Include Eye Bolts, Powe-Rite Bearings, SKF Various Size Bearings,


126{ Group of lots: 124, 125, 126 } (1) Skid Of Assorted Contents To Include Visulation Control Panel, Altas Digitl Monitor, KEB Combilline

Hf-Filter Kits And ABB ACS355 Drives (Machining Department)

127 (1) Skid Of Assorted Various Size Connector Wires And Switches (Machining Department)

128 { Group of lots: 128, 129 } Comau Robotics Model CR17910381 Controller, S/N 1407PE04001 (Machining Department)

129 { Group of lots: 128, 129 } Comau Robotics Model CR17910381 Controller, S/N 1407PE04003 (Machining Department)

130 { Group of lots: 130, 131, 132 } Denso TP-RC7/8 Controller, S/N 410100-1771 (Machining Department)

131 { Group of lots: 130, 131, 132 } Serpro AE0000318503 Pendent (Machining Department)

132 { Group of lots: 130, 131, 132 } Fanuc Model P02018 I Pendent (Machining Department)

133

{ Group of lots: 133, 134 } (1) Skid Of Assorted Contents To Include Fanuc Servo Amplifiers Rated Input 283-325 Volt, Rated Output

230 Volt, With Fanuc Spindle Amplifiers Rated Input 283-325 Volt, Rated Output 230 Volt And (1) GE Fanuc series 16i-M PanelView


134{ Group of lots: 133, 134 } (1) Skid Of Assorted Contents To Include Various Size Chains, Allen-Bradley Switches, H-p Installer, Wire

Cables, 50 PSI. Decreasing, IMI Norgren Bowl Kit Replacements Festo Solenoid Valve's (Machining Department)

135{ Group of lots: 135, 136, 137 } (1) Skid Of Assorted Contents To Include Various Size Tool Holders And End Mills, (Loc. Machining

Department)

136{ Group of lots: 135, 136, 137 } (1) Skid Of Assorted Contents To Include 5'' Piston Seals, Limit Switches, Dial Gauges, Module Cards

And Connectors (Machining Department)

137{ Group of lots: 135, 136, 137 } (1) Skid Of Assorted Contents To Include Disconnector Switches, Delay Switches, Accumulators

Switches, Sensors And Various Size Filters (Machining Department)

138REIS 6-Axis Robotic Arm, 36" Round Floor Base, Reis Robotics Controller Unit, Mounted Rettal Top Thermal Enclosure Cooling Unit,

Model K3384100, 230V, Wollin Electrical Panel (Machining Department)

138AFanuc M10iA 10S Dual Robotic Cell Station, With (2) Fanuc M-10iA 10S 6-Axis Robots, (2) Fanuc System R-30 iA Controller With (2)

Pendant Control And Allen-Bradley PanelView Plus 700, 480 Volt, (Loc. Machining Department)

139{ Group of lots: 139, 140 } (1) Skid of Assorted Contents, To Include Belts, Turhill Gear PumPSI, Trollies, Emerson Gas Valve Kits, Left

Side Handle GriPSI Colusio Pot Contactor (Machining Department)

140{ Group of lots: 139, 140 } (1) Skid Of Assorted Contents, Including Fanuc CP32 Control Units, Allen -Bradley Control Unit And Heating

Rods (Loc. Machining Department )

141 (1) Skid Of Assorted Contents To Include Various Size End Mills, Gears, Tool Holders And Core Breast (Machining Department)

142 { Group of lots: 142, 143 } (1) Skid Of Various Size Pipe Sleeves (Machining Department)

143{ Group of lots: 142, 143 } (1) Skid Of Assorted Contents To include Parker Hydraulic Valves Units, Photo Sensors, Switches, Breakers,

Connectors (Machining Department)

144 (1) Skid Of Assorted Various Size Servo Motors And Motors (Machining Department)

145{ Group of lots: 145, 146 } (1) Skid Of Assorted Contents To Include Tool Detector Kits, Cincinnati Milacron Drives, Mini Code Sensors,

Allen-Bradley Cylinder Position Sensors, Fuses, Magnaloy Coupling (Loc. Machining Department)

146 { Group of lots: 145, 146 } (1) Skid Of Assorted Various Size Wire Assembly Kits (Machining Department)

147 (2) Watlow 2150-3684 FL7 Water Heating Electrical Immersion Rods (Machining Department)

148{ Group of lots: 148, 149 } (1) Skid Of Assorted Contents To Include Plastic And Steel Sprockets, Spring Loaded Connector Shades,

Wheelabrator Bump Guard And Shade Roller (Machining Department)

149 { Group of lots: 148, 149 } (1) Skid Of Various Size Adjustable Steel Frame Pins (Machining Department)

150{ Group of lots: 150, 151 } (2) Skids Of Assorted Motors To Include Various Size Sew-Euro drive Motors And Siemens Servo Motors


151 { Group of lots: 150, 151 } (2) Skids Of Assorted Motors To include Gear PumPSI Motors And Gear Hub Units, (Machining Department)

152 (3) Skids Of Various Size Hoses And Tubes (Machining Department)

153{ Choice of lots: 153, 154 } Strinko Dynarad Melting & Holding Furnace, Approx. 74.36 Gallons, 38" x 25", 480V/3/60, Without Controller

(Die Casting Department)

154{ Choice of lots: 153, 154 } Strinko Dynarad EC1500 Melting & Holding Furnace, Approx. 74.36 Gallons, 38'' W x 25'' D, 480 Volt, 60 Hz

With Controller (Die Casting Department)

155 53'' Melting & Holding Furnace Frame With 34'' Lid (Die Casting Department)

155a { Choice of lots: 155a, 155b } Morgan Crucible, Brand New In Box

155b { Choice of lots: 155a, 155b } Morgan Crucible, Brand New In Box

155c { Choice of lots: 155c, 155d } (15) Morgan Elements, Brand New, 5-Boxes, 3 Units Per Box

155d { Choice of lots: 155c, 155d } (12) Morgan Elements, Brand New, 4-Boxes, 3 Units Per Box

155e (6) Morgan Elements, Brand New, 2-Boxes, 3 Units Per Box

156 (8) Hot Aluminum Molding Molds, With 35'' W x 67'' L Steel Rack (Die Casting Department)

157{ Choice of lots: 157, 158 } South Worth PP3360 Pallet Pal 360 Spring-Actuated Pallet Carousel And Skid Positioner Assembled 43'' L, x

43'' W, 4500 Lb. Capacity, 27'' Max. Height (Die Casting Department)

158{ Choice of lots: 157, 158 } South Worth PP3360 Pallet Pal 360 Spring-Actuated Pallet Carousel And Skid Positioner Assembled, 43'' L,

x 43'' W, 4500 Lb. Capacity, 27'' Max. Height (Die Casting Department)









163South Worth PP3360 Pallet Pal 360 Spring-Actuated Pallet Carousel And Skid Positioner Assembled, 43'' L, x 43'' W, 4500 Lb.

Capacity, 27'' Max. Height (Die Casting Department)

164 Robamat Thermocast 5212 Hot Oil Temperature Control Unit, 480 Volt, 63 Hz, 24 VDC S/N. 17451/2009 (Die Casting Department)

165 Sullair 7500PSI/A Air Compressor, 480 Volt, 125 Max Air Press Rated 135 PSI., S/N. 201101200036 (Die Casting Department)

166 Zeks 600HSFA400 Heatsink Cycling Air Dryer, 300 Max. PSI., 460 Volt, 60 Hz, 4 Hp (Die Casting Department)

167 Air Tank, 165 PSI., 400 Gal. (Die Casting Department)

168 Sullair 2200II Air Compressor, 61909 Run Hours, 30 Hp, 150 PSI., 2.5 Gal. sump Tank Capacity (Oil & Lubrications Department)

169 Sullair Model 407106 Air Compressor, 200 PSI. 230/460 Volt (Oil & Lubrications Department)

170 Sullair Model 02250096-704 Air Compressor, 200 PSI. 230/460 Volt (Loc. (Oil & Lubrications Department)

171 Sullair Model SLR-250 Air Compressor, 203 Rated Input, 230 Volt, 60 Hz, (Oil & Lubrications Department)

172 Air Tank, 165 PSI, 400 Gallon Capacity (Oil & Lubrications Department)

173{ Choice of lots: 173, 174 } Quincy Model QSVI50AN3A 50 HP Rotary Screw Vacuum Pump, 50 HP, 3560 RPM S/N 91842J (Air

Compressor Room)

174{ Choice of lots: 173, 174 } Quincy Model QSVI50AN3A 50 HP Rotary Screw Vacuum Pump, 50 HP, 3560 RPM, 3 Ph, 60 Hz, S/N.

90235J (Air Compressor Room)

175 200 Gallon Air Tank, 75 PSI, 200 Gal. (Air Compressor Room)

176Sullair Model VS20-25/A/SRF Base Mount Rotary Screw Air Compressor, 125 PSI., 460 V 3 Ph, S/N 003-V86999 (Air Compressor

Room)

177 Sullair Model LS20S-150 Base Mount Rotary Screw Air Compressor, 100-110 PSI, S/N 003126723 (Air Compressor Room)

178 Zeks Model 1600NCFA400 Heatsink Cycling Air Dryer, 300 Max. PSI, 460V/3Ph, 4 HP, S/N 546474-2 (Die Casting Department)

179Richmond Engineering Model TK-10 Air Tank, 125 Design Pressure, 230'' Head Thick, 450 Max. Work Temp, 120'' Overall L, 42'' Tank

Dia. S/N. 70772 (Air Compressor Room)

180{ Choice of lots: 180, 181, 182, 183, 185 } Nash Vacuum Dry Pump, Size 1002, 750 RPM, With Test Equipment Control Panel And

Reliance Electric Motor 1170 RPM, 60 Hp, 364T Frame (Basement )

181{ Choice of lots: 180, 181, 182, 183, 185 } Nash Vacuum Dry Pump, Size CL 1002,POS. 4, 880 RPM, With Test Equipment mdl. 22053

Control Panel And Pace Maker Motor 1170 RPM, 60 Hp, 364T Frame (Basement)

182{ Choice of lots: 180, 181, 182, 183, 185 } Nash Vacuum Dry Pump, Size 1002, 750 RPM, With Test Equipment Control Panel And

Reliance Electric Motor 1170 RPM, 60 Hp, 364T Frame (Basement)

183{ Choice of lots: 180, 181, 182, 183, 185 } Nash Vacuum Dry Pump, Size CL-102, 880 RPM, With Gloud Motor 40 Hp, 1170 RPM, 324T

Frame (Basement)

185{ Choice of lots: 180, 181, 182, 183, 185 } Nash Vacuum Dry Pump, Size CL 702, 980 RPM, With Control Panel And Reliance Electric

Motor 1170 RPM, 60 Hp, 364T Frame (Loc. Basement)

186 { Choice of lots: 186, 187 } Nash Size CL 702 Vacuum Dry Pump Size CL 702, 984 RPM, With 40 HP, 324T Frame, (Loc. Basement )

187 { Choice of lots: 186, 187 } Nash Size CL 702 Vacuum Dry Pump Size CL 702, 1770 RPM (Loc. Basement )

188{ Group of lots: 188 } Nash-Elmo Model CL302/4 Vacuum Pump With Delco mdl. EG5404E5 Motor, 3240 Frame, 1170 RPM, 15 Hp

(Loc. Basement)

189 Nash Size CL 302 Vacuum Pump Size CL 302, With Stanford Electric Motor 1175 RPM, 460Volt (Loc. Basement )

190 { Choice of lots: 190 } Nash-Elmo Model CL302/4 Vacuum Pump With Baldor Motor, 3240 Frame, 1170 RPM, 15 Hp (Loc. Basement)

191 { Group of lots: 191, 192, 194 } Nash-Elmo Model CL702 Vacuum Pump (Only) (Loc. Basement )

192 { Group of lots: 191, 192, 194 } Nash-Elmo Model CL702 Vacuum Pump, 1765 RPM Motor (Loc. Basement)

193 { Choice of lots: 193 } Nash-Elmo Model Cl702 Vacuum Pump, 1765 RPM Motor 324T Frame, 40 Hp (Loc. Basement)

194 { Group of lots: 191, 192, 194 } Nash-Elmo Model Cl702 Vacuum Pump, With Delco 30 Hp. Motor, 4040 Frame3 Ph (Loc. Basement )

195{ Choice of lots: 195, 196, 197 } Busch RC0250-B006-1102 Vacuum Pump, 175 CFM, S/N. C-7492, With High Efficiency Motor 3Ph

1145 RPM, 230/460 Volt, 215TC Frame (Loc. Basement )

196{ Choice of lots: 195, 196, 197 } Busch Vacuum Pump, 176 CFM, With High Efficiency Motor 3Ph 1145 RPM, 230/460 Volt, 215TC

Frame, S/N. AB28283.2 (Loc. Basement )

197{ Choice of lots: 195, 196, 197 } Busch Vacuum Pump, 177 CFM, With High Efficiency Motor 3Ph 1145 RPM, 230/460 Volt, 215TC

Frame, S/N.AE08735-18 (Loc. Basement )

198 Fabwell Air Tank, 200 PSI. 53'' Between Seams (Loc. Basement )

199{ Choice of lots: 199, 200, 201, 202, 203, 204, 205 } Nash Elmo Size CL 317 Vacuum Pump With Reliance Electric Motor 1170 RPM,

364T Frame, 60 Hp, 230/460 Volt (Loc. Basement)









204{ Choice of lots: 199, 200, 201, 202, 203, 204, 205 } Nash Elmo CL 317 Size, With Reliance Electric Motor 1170 RPM, 364T Frame, 60

Hp, 230/460 Volt (Loc. Basement)

205 { Choice of lots: 199, 200, 201, 202, 203, 204, 205 } Nash Elmo Size SC 717 Vacuum Pump, 880 RPM (Basement)

206 { Group of lots: 206, 207, 208 } 5000 Lb. Capacity Engine Jack (Basement)

207 { Group of lots: 206, 207, 208 } 2-Ton Capacity Engine Jack (Basement)

208 { Group of lots: 206, 207, 208 } 5000 Lb. Capacity Thern Engine Jack (Basement)

209{ Group of lots: 209, 210 } Contents Of Pallet Racking To Include Valves, Plastic Pipe Fittings, Bus Bars, Lift Master Connector, Hopper

Unit, Blower (Loc. Basement )

210 { Group of lots: 209, 210 } (5) Sections Of Pallet Racking With (6) 138'' H Up Rights,(30) 8' Cross Beams, (Basement)

211 { Group of lots: 211, 211A, 212 } 550 Lb. Capacity Pallet Jack, 36" x 3" (Basement)

211A { Group of lots: 211, 211A, 212 } U-Line H-1043 5500 Lb. Pallet Jack, 5500lb. Capacity, 4' L x 6'' W Fork Extension (Loc. Basement)

212 { Group of lots: 211, 211A, 212 } 5500 Lb. Capacity Global Pallet Jack, 48" x 6" Extension (Basement)

212A{ Group of lots: 212A, 212B, 212C } Dayton 5500 Lb. Pallet Jack, 5500 lb. Capacity 4' L x 6'' W Fork Extension (Loc. Harley Davidson

Department)

212B{ Group of lots: 212A, 212B, 212C } Global 5500 Lb. Pallet Jack, 5500 lb. Capacity 4' L x 6'' W Fork Extension (Loc. Harley Davidson

Department)

212C{ Group of lots: 212A, 212B, 212C } Global 5500 Lb. Pallet Jack, 5500 lb. Capacity 4' L x 6'' W Fork Extension (Loc. Harley Davidson

Department)

250

Haas TM1 CNC Toolroom Mill & Machining Center, Travels: X-30'', Y-12", Z-16", 47" x 10" T-Slotted Table Size, 1000 lb. Max. Table

Load, 0-4000 RPM Spindle Speed, CAT 40 Spindle Taper, Haas CNC Control, S/N 33289, With Kurt mdl. D688 6'' Machine Vise

(Location: Die Repair)

251

Brown & Sharpe One 7-10-7 CMM Machine, Travels: X-27.6", Y-39.4", Z-25", With Granite Table, Renishaw PH10M Probe With (6)

Various Size Touch Probes, HexagonMetrology H009834/D Pendant,Renishaw PHC10-3 Plus Unit, 24'' HP LA2306x Computer Monitor

Screen, HP Pro Desk Computer Tower Keyboard And Mo ...[more]

251a Starrett AV300 CNC Vision System, Model AV300+-Z-QC530-3LED, S/N GA-1061-1508-1209

252Zeiss Prismo CMM, Travels: X-35", Y-60", Z-20", With Zeiss Vast Probe, (6) Touch Probes, (1) Probe Head And Probe (1) Magnetic V-

Vise, Zeiss Controller, (1) 18'' W HP Computer Screen (1) HP Computer Tower S/N 115246 (Loc. CMM Room)

252a Brown & Sharpe Global Classic 7107 CMM, SN 0909-1431, with Renishaw PH10M Probe (Sale Subject To Confirmation)

25310-Ton Engineered Systems Overhead Crane, Approx. 38' Span, (2) 5-Ton Acco Wright Cable Hoist To Include Approx. 32' L Runway

Rails (Loc. Die Repair )

2545-Ton Piedmont Hoist & Crane Overhead Bridge Crane, 5-Ton x Approx. 38' Span, With Street 5-Ton Cable Hoist (Loc. Die Department

)

2555-Ton Piedmont Hoist & Crane Overhead Bridge Crane, 5-Ton x Approx. 38' Span, With Work-Rated 5-Ton Cable Hoist (Loc. Die

Department )

255A5-Ton Piedmont Hoist & Crane Overhead Bridge Crane, 5-Ton x Approx. 38' Span, Bridge Rail, With Work-Rated 5-Ton Cable Hoist

(Loc. Die Department)

255B{ Group of lots: 255B, 255C } (12) Assorted Hoisting Chains, Various Sizes, Ranging From 1000 lb. Capacity (Loc. Machining

Department)

255C{ Group of lots: 255B, 255C } Assorted Various Size Eye Bolts, Ranging From 5,000-24,000 Lb. Capacity, With (3) Various Size Die

Bars (Loc. Machining Department)

25610-Ton Piedmont Hoist & Crane Overhead Bridge Crane, 10-Ton x Approx. 19' Span, With Yale 10-Ton Cable Hoist, To Include Approx.

105' Runway Rails (Loc. Machining Department)

25715-Ton Piedmont Hoist & Crane Overhead Bridge Crane, 15-Ton x Approx. 35' Span, With (2) Detroit 7-1/2-Ton Cable Hoist, To Include

Approx. 87' L Runway Rails (Loc. Machining Department)

258Acco Wright Model 14208 1000 Lb. Capacity Electric Cable Hoist, 1000 lbs. Capacity Cable Hoist, 49' Lift 22 FPM, 1800 RPM, 7.5 Hp, 3

Ph, 230-460 Volt, S/N. 775489A-8 (Loc. Penthouse)

260Taylor -Dunn mdl. E0-034-51 Electric Stockchaser, 24 Volt, 1620 lb. Approx. Weight, 1100 lb. Capacity, S/N. 176726, With EF Ferro

resonant Series, mdl XPT12-475B- EX-F, 24 Volt Battery Charger (Loc. Front Shipping Dock )

261 { Group of lots: 261, 262, 263 } LR ALTRA 5000 Lb. Pallet Jack, Model ALT50, 5000 Lb. Capacity (Loc. Back Shipping Dock )

262 { Group of lots: 261, 262, 263 } Roll-Lift 5000 Lb. Pallet Jack, 5000 lb. Capacity S/N. 134723 (Loc. Back Shipping Dock)

263 { Group of lots: 261, 262, 263 } Crown 5000 Lb. Pallet Jack, 5000 Lb. Capacity (Loc. Die Casting )

263A{ Group of lots: 263A, 263B, 263C } Crown 5500 Lb. Pallet Jack , 5500 lb. Capacity 4' L x 6'' W Fork Extension (Loc. Machining

Department)

263B{ Group of lots: 263A, 263B, 263C } Crown 5500 Lb. Pallet Jack , 5500 lb. Capacity 4' L x 6'' W Fork Extension (Loc. Machining

Department)

263C{ Group of lots: 263A, 263B, 263C } Wesco 5500 Lb. Pallet Jack, 5500 lb. Capacity 4' L x 6'' W Fork Extension (Loc. Machining

Department)

263D { Group of lots: 263D, 264, 265 } Crown 5500 Lb. Pallet Jack, 5500 lb. Capacity 4' L x 6'' W Fork Extension (Loc. Machining Department)

264 { Group of lots: 263D, 264, 265 } Global 5500 Lb. Pallet Jack, 5500 Lb. Capacity (Loc. Die Casting )

265 { Group of lots: 263D, 264, 265 } 5500 Lb. Pallet Jack, 5500 Lb. Capacity (Loc. Die Casting )

265A { Group of lots: 265A, 266 } Global 5500 Lb. Pallet Jack , 5500 lb. Capacity, 4' L x 6'' W Fork Extension (Loc. Machining Department)

266 { Group of lots: 265A, 266 } 5500 Lb. Capacity (Loc. Die Casting )

267{ Option of lots: 267, 268, 269, 270, 271, 272 } (9) 30'' W x 36'' L Mesh Wire Baskets With (9) 1200 lb. Capacity Mobile Carts (Loc. Die

Casting )


Casting )


Casting )


Casting )


Casting )


Casting )

273 (7) 30'' W x 36'' L Mesh Wire Baskets With (7) 1200 lb. Capacity Mobile Carts (Loc. Die Casting )

274 (14) 30'' W x 36'' L Mesh Wire Baskets (Loc. Die Casting )

275 { Group of lots: 275, 276, 277 } (4) Various Size Metal Bins (Loc. Die Casting )



278{ Option of lots: 278, 279, 280, 281, 282, 283, 284, 285, 286, 287, 288, 289, 290, 291, 292, 293, 294, 295, 296 } Strong Hold Heavy-

Duty 2-Door Cabinet, 36'' W x 24'' L x 78'' H Without Contents (Loc. Die Repair)


























Duty 2-Door Cabinet, 60'' W x 24'' L x 78'' H Without Contents (Loc. Machining Department)

292{ Option of lots: 278, 279, 280, 281, 282, 283, 284, 285, 286, 287, 288, 289, 290, 291, 292, 293, 294, 295, 296 } Weber Heavy-Duty 2-

Door Storage Cabinet, 36'' W x 24'' L x 72''H Without Contents (Loc. Machining Department)

293{ Option of lots: 278, 279, 280, 281, 282, 283, 284, 285, 286, 287, 288, 289, 290, 291, 292, 293, 294, 295, 296 } Weber Heavy-Duty 2-

Door Storage Cabinet, 36'' W x 24'' L x 72''H Without Contents (Loc. Machining Department)


Duty 2-Door Cabinet, 36'' W x 24'' L x 78'' H Contents are included (Loc. Maintenance Department )


Duty 2-Door Cabinet, 36'' W x 24'' L x 78'' HContents are included (Loc. Maintenance Department )


Duty 2-Door Cabinet, 36'' W x 24'' L x 78'' HContents are included (Loc. Maintenance Department )

297{ Group of lots: 297, 298, 298A, 298B, 298C, 299 (P) } Strong Hold Heavy-Duty 2-Door Cabinet, 36'' W x 24'' L x 78'' HContents are

included (Loc. Maintenance Department)


included (Loc. Maintenance Department )

298A{ Group of lots: 297, 298, 298A, 298B, 298C, 299 (P) } Strong Hold Heavy-Duty 2-Door Storage Cabinet, 36'' W x 24'' L x 78'' HContents

are included (Loc. Machining Department)

298B{ Group of lots: 297, 298, 298A, 298B, 298C, 299 (P) } Strong Hold Heavy-Duty 2-Door Storage Cabinet, 36'' W x 24'' L x 78'' HContents

are included (Loc. Machining Department)

298C{ Group of lots: 297, 298, 298A, 298B, 298C, 299 (P) } Just-rite Sure-Grip EX 43'' W x 18''L x 66''H Flammable Safety 2-Door Storage

Cabinet, 45 Gallon Capacity, 170 Liters Capacity(Loc. Machining Department)


included (Loc. Maintenance Department )

300{ Choice of lots: 300, 301, 302, 303, 304, 305, 306, 307, 309, 310, 311, 312, 313, 314, 315, 316, 317 } Stanley-Vidmar Tool Cabinet,

30''W x 28''D x 59''H,Contents are included (Loc. Maintenance Tool Room)















308 { Choice of lots: 308 } Stanley-Vidmar Tool Cabinet, 30''W x 28''D x 59''H,Contents are included (Loc. Maintenance Tool Room)



















318{ Group of lots: 318, 319, 320 } (2) Fastenal Multi-Slot Tool Bins, Double Stacked 34'' W x 14''L 84'' H With Assorted Contents To

Include Flow Control Valves, Shoulder Sockets Heads (Loc. Maintenance Tool Room )

319{ Group of lots: 318, 319, 320 } (2) Fastenal Multi-Slot Tool Bins, Double Stacked 34'' W x 14''L 84'' H With Assorted Contents To

Include Flow Control Valves, Shoulder Sockets Heads, Straight Union Fittings, H.F. Vac Ejects, (Loc. Maintenance Tool Room )

320{ Group of lots: 318, 319, 320 } (2) Fastenal Multi-Slot Tool Bins, Double Stacked 34'' W x 14''L 84'' H With Various Size O-Rings.

Contents are included (Loc. Maintenance Tool Room )

321{ Choice of lots: 321, 322, 323, 324, 325, 326, 327 } (1) MSC 34'' W x 12'' L x 72'' H Multi-Slot Tool Bins, With Assorted Content To

Include Nuts Bolts And Screws (Loc. Maintenance Tool Room )













328 { Group of lots: 328, 329 } Lyon 30'' W x 28'' L x 59''H Multi -Drawer Vidmar Cabinets, Without Contents (Loc. Machining Tool Crib )

329 { Group of lots: 328, 329 } Lyon 30'' W x 28'' L x 59''H Multi -Drawer Vidmar Cabinets, Without Contents (Loc. Machining Tool Crib )

330 { Option of lots: 330, 331, 332 } Stanley-Vidmar Tool Cabinet, 30" W x 28" L x 59" H Without Contents (Loc. Machining Tool Crib )



333 Stanley-Vidmar Tool Cabinet, 30'' W x 28'' L x 45''H, Without Contents (Loc. Machining Department )

334{ Option of lots: 334, 335, 336, 337 } Stanley Sentry 100 Static Gard Vidmar Tool Cabinet, 30''W x 28''L x 59''H, Without Contents (Loc.

Machining Department )

335{ Option of lots: 334, 335, 336, 337 } Stanley Static Gard Tool Cabinet, 30''W x 28''L x 59''H, Without Contents (Loc. Machining

Department )

336{ Option of lots: 334, 335, 336, 337 } Stanley-Vidmar Tool Cabinet, 30'' W x 28'' L x 45''H, Without Contents (Loc. Machining Department

)

337{ Option of lots: 334, 335, 336, 337 } Stanley-Vidmar Tool Cabinet, 30'' W x 28'' L x 45''H, Without Contents (Loc. Machining Department

)

338Lantech Model Q300 Stretch Wrapper Machine, 25-35 Peak Speed, 72'' Load Size, 80'' Max. Load Wrap Height, 4000 lb. Capacity, 12

RPM, 65'' Turntable Size, (Loc. Front Shipping Dock)

340 Acecor Model SE50-175PT Sump Sucker, 175 PSI. 480 Volt, 60 Hz, 3 Ph (Loc. Die Casting )

341 { Option of lots: 341, 342, 343 } Roura Hopper 28" W x 48" L x 24" D Mobile Self Dumping Hopper, 500 Lb. Capacity (Loc. Die Casting )






347 { Choice of lots: 347, 348 } Roura Hopper 28" W x 48" L x 24" D Mobile Self Dumping Hopper, 500 Lb. Capacity (Loc. Die Casting )

348 { Choice of lots: 347, 348 } Roura Hopper 28" W x 48" L x 24" D Mobile Self Dumping Hopper, 500 Lb. Capacity (Loc. Die Casting )

349{ Group of lots: 349, 350, 351, 352, 353, 354, 355, 356, 357, 358, 359, 360, 361, 362, 363, 364, 365, 366, 367, 368, 369, 370 (P) }

Roura Hopper 28" W x 48" L x 24" D Mobile Self Dumping Hopper, 500 Lb. Capacity (Loc. Die Casting )

350{ Group of lots: 349, 350, 351, 352, 353, 354, 355, 356, 357, 358, 359, 360, 361, 362, 363, 364, 365, 366, 367, 368, 369, 370 (P) }


351{ Group of lots: 349, 350, 351, 352, 353, 354, 355, 356, 357, 358, 359, 360, 361, 362, 363, 364, 365, 366, 367, 368, 369, 370 (P) }


352{ Group of lots: 349, 350, 351, 352, 353, 354, 355, 356, 357, 358, 359, 360, 361, 362, 363, 364, 365, 366, 367, 368, 369, 370 (P) }


353{ Group of lots: 349, 350, 351, 352, 353, 354, 355, 356, 357, 358, 359, 360, 361, 362, 363, 364, 365, 366, 367, 368, 369, 370 (P) }


354{ Group of lots: 349, 350, 351, 352, 353, 354, 355, 356, 357, 358, 359, 360, 361, 362, 363, 364, 365, 366, 367, 368, 369, 370 (P) }

Roura Hopper 28" W x 48" L x 24" D Mobile Self Dumping Hopper, 500 lb. Capacity (Machining Department )

355{ Group of lots: 349, 350, 351, 352, 353, 354, 355, 356, 357, 358, 359, 360, 361, 362, 363, 364, 365, 366, 367, 368, 369, 370 (P) }


356{ Group of lots: 349, 350, 351, 352, 353, 354, 355, 356, 357, 358, 359, 360, 361, 362, 363, 364, 365, 366, 367, 368, 369, 370 (P) }


357{ Group of lots: 349, 350, 351, 352, 353, 354, 355, 356, 357, 358, 359, 360, 361, 362, 363, 364, 365, 366, 367, 368, 369, 370 (P) }


358{ Group of lots: 349, 350, 351, 352, 353, 354, 355, 356, 357, 358, 359, 360, 361, 362, 363, 364, 365, 366, 367, 368, 369, 370 (P) }


359{ Group of lots: 349, 350, 351, 352, 353, 354, 355, 356, 357, 358, 359, 360, 361, 362, 363, 364, 365, 366, 367, 368, 369, 370 (P) }


360{ Group of lots: 349, 350, 351, 352, 353, 354, 355, 356, 357, 358, 359, 360, 361, 362, 363, 364, 365, 366, 367, 368, 369, 370 (P) }


361{ Group of lots: 349, 350, 351, 352, 353, 354, 355, 356, 357, 358, 359, 360, 361, 362, 363, 364, 365, 366, 367, 368, 369, 370 (P) }


362{ Group of lots: 349, 350, 351, 352, 353, 354, 355, 356, 357, 358, 359, 360, 361, 362, 363, 364, 365, 366, 367, 368, 369, 370 (P) }


363{ Group of lots: 349, 350, 351, 352, 353, 354, 355, 356, 357, 358, 359, 360, 361, 362, 363, 364, 365, 366, 367, 368, 369, 370 (P) }


364{ Group of lots: 349, 350, 351, 352, 353, 354, 355, 356, 357, 358, 359, 360, 361, 362, 363, 364, 365, 366, 367, 368, 369, 370 (P) }


365{ Group of lots: 349, 350, 351, 352, 353, 354, 355, 356, 357, 358, 359, 360, 361, 362, 363, 364, 365, 366, 367, 368, 369, 370 (P) }


366{ Group of lots: 349, 350, 351, 352, 353, 354, 355, 356, 357, 358, 359, 360, 361, 362, 363, 364, 365, 366, 367, 368, 369, 370 (P) }


367{ Group of lots: 349, 350, 351, 352, 353, 354, 355, 356, 357, 358, 359, 360, 361, 362, 363, 364, 365, 366, 367, 368, 369, 370 (P) }


368{ Group of lots: 349, 350, 351, 352, 353, 354, 355, 356, 357, 358, 359, 360, 361, 362, 363, 364, 365, 366, 367, 368, 369, 370 (P) }


369{ Group of lots: 349, 350, 351, 352, 353, 354, 355, 356, 357, 358, 359, 360, 361, 362, 363, 364, 365, 366, 367, 368, 369, 370 (P) }


370{ Group of lots: 349, 350, 351, 352, 353, 354, 355, 356, 357, 358, 359, 360, 361, 362, 363, 364, 365, 366, 367, 368, 369, 370 (P) }


383

Parlec Parsetter TMM Series 1550 Tool Presetter, 12" Max Tool, 15" Tool Length, 40-Taper Spindle, With 19'' Computer Screen Parlec

Software, (1) Dell Computer Tower To Include 60'' W x 31''L Workbench With Kennedy Multi Drawer Cabinet, Input 100-240 V/AC 2A,

50-60 Hz, (Machining Department)

384 { Option of lots: 384, 385 } Lyon 30'' W x 28'' L x 59''H Multi-Drawer Vidmar Cabinet, Without Contents (Loc. Machining Department)

385 { Option of lots: 384, 385 } Lyon 30'' W x 28'' L x 59''H Multi-Drawer Vidmar Cabinet, Without Contents (Loc. Machining Department)

386 { Group of lots: 386, 387 } Lyon 30'' W x 28'' L x 45''H Multi-Drawer Vidmar Cabinet, Without Contents (Loc. Machining Department)

387 { Group of lots: 386, 387 } Lyon 30'' W x 28'' L x 45''H Multi-Drawer Vidmar Cabinet, Without Contents (Loc. Machining Department)

388 14" Starrett Optical Comparator, 10x, 20x, 50x, Magnification (Loc. Machining Department)

389{ Group of lots: 389, 390, 391 } Argon Cylinder Portable And Wheeled Fire Extinguisher, 110 Cu. Ft Charged With Cap (Loc. Die Casting

Department )


Department )


Department )

392 { Group of lots: 392, 393, 394 } Portable And Wheeled Fire Extinguisher 110 Cu. Ft Charged With Cap (Loc. Die Casting Department )



395{ Choice of lots: 395, 396, 397 } Regoplas P160MD/8/SM73/S K/RT100 Thermal Regulator Unit, 10 PSI Bar, 25 Liters SN

117501180001, New 2018 (Loc. Die Casting )


117501180002, New 2018 ( Loc. Die Casting )


117501180003, New 2018 ( Loc. Die Casting )

398 Airtech SCS-L63-1TAN Job# 1639 Vacuum System, 1 Hp, 200 PSI. Tank 53'' Between Seams, 3Hp Motor (Loc. Die Casting )

399Chem Trend Moswl 60C DMD-EE2 / 001 Central Lube System, 60 C Production Pump Stand 120 Volt, 1 Ph, 60 Hz, 30 Amp, With Allen

Bradley Control (Loc. Die Casting )

400 { Group of lots: 400, 401, 402, 403 } (2) 24'' x 22'' Mobile Hand Transport Carts (Loc. Die Casting )




404{ Choice of lots: 404 } Spanco Mobile 2-Ton Gantry Crane, 24' Max Height Adjustable, 9' Spain With Coffing 2-Ton Chain Hoist And 2-

Botton Pendant (Loc. Machining Department )

405Spanco Mobile 2-Ton Gantry Crane, 12' Max Height Adjustable, 7' Spain With C 1-Ton Chain Hoist And 2-Botton Pendant (Loc.

Machining Department )

406Rico PLW-I-DO-WR-2500 Electric Die Cart, 25,000 Lb. Capacity, 24 Volt, S/N. R-15124,With GNB EHY Series mdl. EHY24M100N

Battery Charger 24 Volt DC, 480 Volt AC, S/N. 348846 (Loc. Machining Department ) **Note: Sale is Subject to Confirmation**

406ABlue Giant RBC3000SPB 3000 Lb. Materials Lifting & Handling System, With 3000 lb. Capacity Boom Retracted, 1500 lb. Boom

Extension S/N. 60127, To Include Napa 12-Volt Battery Charger and Starter (Loc. Machining Department)

406BDayton 05RRZ5 Battery Power Lift Stacker, 42'' Fork Extensions, 2200 Lb. Capacity, 12 Volts, S/N. 13071081-1/024 (Loc. Machining

Department)

406CInterthor LL 1000TE Battery Powered Trans-Positioner, 45'' L Fork Extensions, 2200 lb. Capacity S/N LX536822 (Loc. Machining

Department)

407 Dual 8'' Pedestal Grinder (Loc. Machining Department)

408 5'' Bench Vise (Loc. Machining Department)

410 { Group of lots: 410, 411, 412, 413, 414, 415 } Approx. (9) Various Size Storage Racks (Loc. Machining Department)

411 { Group of lots: 410, 411, 412, 413, 414, 415 } (1) Skid Of Disassembled Various Size Storage Racks, (Loc. Machining Department)




415 { Group of lots: 410, 411, 412, 413, 414, 415 } (5) Skids Of Disassembled Various Size Storage Racks (Loc. Machining Department)

416 { Group of lots: 416, 417 } (9) Various Size Carts (Loc. Machining Department)

417 { Group of lots: 416, 417 } (12) Various Size Carts (Loc. Machining Department)

418{ Group of lots: 418, 419, 420, 421, 422, 423, 424, 425, 426, 427, 428, 429, 430, 431, 432, 433, 434, 435 } (5) CAT 50 Tool Holders

(Loc. Machining Department)



































436{ Group of lots: 436, 437, 438, 439, 440, 441, 442, 443, 444, 445, 446, 447, 448, 449, 450, 451, 452, 453, 454 } (6) HSK Tool Holders






































455 { Group of lots: 455, 456, 457, 458, 459, 460, 461, 462, 463, 464, 465 } (5) CAT 50 Tool Holders (Loc. Machining Department)











466 { Group of lots: 466, 467, 468, 469, 470, 471 } (6) HSK Machine Tool Holders (Loc. Machining Department)






472{ Group of lots: 472, 473, 474, 475, 476, 477, 478, 479, 480, 481, 482, 483, 484, 485, 486, 487, 488, 489, 490 } (5) CAT 50 Tool

Holders (Loc. Machining Department)




Holders With (4) Various Size End Mills (Loc. Machining Department)







478{ Group of lots: 472, 473, 474, 475, 476, 477, 478, 479, 480, 481, 482, 483, 484, 485, 486, 487, 488, 489, 490 } (6) HSK Machine Tool


























491 { Group of lots: 491, 492, 493, 494, 495 } Upper Scoot Mobile Tool Changing Cart (Loc. Machining Department)

492 { Group of lots: 491, 492, 493, 494, 495 } Mobile Tool Changing Cart (Loc. Machining Department)




496 Approx. (50) Assorted Various Size Machine Die Molds (Loc. Machining Department)

497{ Group of lots: 497, 497a, 497b, 497c, 497d } (9) Sections Of Pallet Racking, 9,000 Lb. Capacity (11) 10' H Up-Rights, Approx. (54) 5' L

Cross Beams With Metal Decking (Loc. Die Casting )

497a { Group of lots: 497, 497a, 497b, 497c, 497d } Heavy Duty Pallet Racking, 18 Sections, 4048 Lb. Capacity

497b { Group of lots: 497, 497a, 497b, 497c, 497d } Heavy Duty Pallet Racking, 18 Sections, 4048 Lb. Capacity

497c { Group of lots: 497, 497a, 497b, 497c, 497d } Heavy Duty Pallet Racking, 15 Sections, 4048 Lb. Capacity

497d { Group of lots: 497, 497a, 497b, 497c, 497d } Heavy Duty Pallet Racking, 7 Sections, 4048 Lb. Capacity

499 Wheelabrator Model CM-08 Dust Collector, 45'' x 90'' L Approx. 30' H, 200 KST Valve, S/N.601415 (Loc. Outside Near Front Entrance )

500Fike Model CV-SF Dust Collector, 24' W x 36'' L, 25 Ft-Lbs. Torque, Min. .25 PSI., Max. .75 PSI., Part No. D2042-3 (Loc. Outside Near

Front Entrance )

501 (7) 16'' W x 3''L x 7' H A-Frame Racks, With Assorted Various Size Aluminum Piping And PVC Tubes (Loc. Outside Near Basement )

502 { Group of lots: 502, 503 } Assorted Various Size Guard Rails, (Loc. Outside Near Basement )

503 { Group of lots: 502, 503 } (1) 46'' L x 14'' W x 66'' H 6-Cylinder Rack, (Loc. Outside Near Basement )

504 (1) 30'' W x 36'' W x 5'' H Mesh wire Propane Cage, (Loc. Outside Near Basement )

505

Gaylord of misc. machine parts to include HAAS servo amplifier, Numatic Control, and Siemens self-protect contactor (Sale Is Subject

To Confirmation) Gaylord of misc. machine parts to include HAAS servo amplifier, Numatic Control, and Siemens self-protect contactor

(Sale Is Subject To Co ...[more]

506Gaylord of mics. Machine partsto include Allen-Bradley Panel view plus, valves, Praker Cylinders, and Cleco MPRO 400 GC (Sale Is

Subject To Confirmation)

507 { Group of lots: 507, 508 } Gaylord of mics. Air and Oil Filters (Sale Is Subject To Confirmation)

508 { Group of lots: 507, 508 } Gaylord of misc. machine parts to include Heater clamps (Sale Is Subject To Confirmation)

509{ Group of lots: 509, 510 } Gaylord of misc. machine parts to include Siemens connectors and touch screen (Sale Is Subject To

Confirmation)

510 { Group of lots: 509, 510 } Gaylord of misc. machine parts to include Transducers, and Transmitters (Sale Is Subject To Confirmation)

511 Gaylord of misc. machine parts to include 3/8 in. Wilkerson Lubricators, and safety horns (Sale Is Subject To Confirmation)

512 Gaylord of misc. Air and Oil filters (Sale Is Subject To Confirmation)

513{ Group of lots: 513, 514, 515 } Gaylord of misc. machine parts to include Fanuc Axis modules, pumps and electric motor (Sale Is

Subject To Confirmation)

514{ Group of lots: 513, 514, 515 } Gaylord of misc. machine parts to include Cleco control and Material feeders (Sale Is Subject To

Confirmation)

515 { Group of lots: 513, 514, 515 } Gaylord of spare parts for all machines nuts, bolts, and wires (Sale Is Subject To Confirmation)

516 Gaylord of Allen-Bradley switches, Square D limit switches and Keyence wire harnesses (Sale Is Subject To Confirmation)

517 { Group of lots: 517, 518, 519 } Gaylord of misc parts (Sale Is Subject To Confirmation)

518 { Group of lots: 517, 518, 519 } Gaylord of misc. electric motors (Sale Is Subject To Confirmation)

519 { Group of lots: 517, 518, 519 } Gaylord of misc. machine lights and filters (Sale Is Subject To Confirmation)

520{ Group of lots: 520, 521 } Gaylord of misc. machine parts to include Omron safety beams, clamps and wiring (Sale Is Subject To

Confirmation)

521 { Group of lots: 520, 521 } (4) 100 drawer cabinets on pallet (Sale Is Subject To Confirmation)

522 Gaylord of misc. parts for Chiron and tooling (Sale Is Subject To Confirmation)

523 Gaylord of misc. tooling (Sale Is Subject To Confirmation)

524 Gaylord of misc. Hydraulics (Sale Is Subject To Confirmation)

525 Gaylord of Chiron parts (Sale Is Subject To Confirmation)

526 { Group of lots: 526, 528, 529, 530 } Gaylord of misc. filters (Sale Is Subject To Confirmation)

527 Gaylord of misc. Hydraulics (Sale Is Subject To Confirmation)

528 { Group of lots: 526, 528, 529, 530 } Gaylord of misc. electric motors (Sale Is Subject To Confirmation)

529 { Group of lots: 526, 528, 529, 530 } Pallet of Chiron and Fanuc parts (Sale Is Subject To Confirmation)

530 { Group of lots: 526, 528, 529, 530 } Assorted size Ball Screws (Sale Is Subject To Confirmation)

531 { Group of lots: 531, 532, 533, 534, 535, 536 } Gaylord of misc. Air, Oil filters and Chiron P/N 1121502 (Sale Is Subject To Confirmation)

532 { Group of lots: 531, 532, 533, 534, 535, 536 } (2) Tech Motive Tool CS 4000 (Sale Is Subject To Confirmation)

533 { Group of lots: 531, 532, 533, 534, 535, 536 } (1) crated Spindle (Sale Is Subject To Confirmation)

534 { Group of lots: 531, 532, 533, 534, 535, 536 } Assorted size Feed Screws and guide tracks (Sale Is Subject To Confirmation)

535 { Group of lots: 531, 532, 533, 534, 535, 536 } 11- drawer Vidmar (Sale Is Subject To Confirmation)

536{ Group of lots: 531, 532, 533, 534, 535, 536 } (5) crates of drawers and tooling and (7) Shelf Units for Drawers (Sale Is Subject To

Confirmation)

prestige equipment auctions / holland industrial group

Documents