PRESSURE VS TEMPERATURE PACKING RATING COLOR CODED OPTIONS

PTFE

6K / 10K PSI

GRAPHOIL

I.T.E. s.r.l. COMMITS ITSELF TO CONSTANTLY IMPROVE ITS PRODUCTS AND THEREFORE IT RESERVES THE RIGHT TO MODIFY DATA, FEATURES WITHOUT NOTICE.

www.ite-srl.comDWG NAME: NEEDLE.dft - REV.: - DATE: 16/04/2018 - I .T.E. s.r.l. COMMITS ITSELF TO CONSTANTLY IMPROVE ITS PRODUCTS AND THEREFORE IT RESERVES THE RIGHT TO MODIFY DATA, FEATURES W ITHOUT NOTICE.

Standard Valve - Pressure rating up to 10,000 psig

STANDARD VALVE

MODEL:

NEEDLE

LIST OF MATERIAL

POS DESCRIPTION AISI 316L A105 LF2 F51 F55 ALLOY 400 ALLOY C276 ALLOY A625 6MO

1 BODY BONNET M18x1 AISI 316L A105 A350 LF2 F51 F55 A400 C276 A625 6MO

2 GLAND PACKING PTFE - - - - - - - -

3 GRAPHOIL THRUST BUSH AISI 316L - - - - - - - -

4 NEEDLE AISI 316L AISI 316L AISI 316L F51 F55 A400 C276 A625 6MO

5 STEM AISI 316L - - - - - - - -

6 GLAND PACKING ADJUSTER AISI 303 - - - - - - - -

7 GLAND ADJUSTER LOCK NUT AISI 303 - - - - - - - -

8 DUST CUP HYTREL BLU - - - - - - - -

9 T HANDLE 50mm AISI 303 - - - - - - - -

10 PIN 4X12 - ISO 8741 A2 - - - - - - - -

11 NO HEAD SCREW M6x10 - 45H - DIN 915 A2 - - - - - - - -

9

8

6

7

11

10

5

1

3

2

4

Equalise

Vent/test

Isolate

Locking Plate Anti-Tamper Head Anti-Tamper Headwith padlock

FEATURES

1 Metal to Metal Seal to Valve Body.

2Adjustable packing installed below operating threads to preventmedium contamination or lubrificant washout of operatingthreads.

3 Metal to Metal secondary needle seal.

4Non-rotating lower stem for smooth operation and minimumwear of sealing elements. The lower stem is antiblow-out/non-removable for your safety.

5Stem with cold rolled threads for high strength and smoothoperation. Stem incorporated back stop design.

6 Gland packing adjuster with easy acces.

7 Gland adjuster lock nut for vibration protection.

8Close dust cup for operating thread protection and providingcolour coded functional identification

9Operating handle for low torque function. Operating options areAnti-Tamper or lcoking device features. Standard lenght forapplication up to 6.000 psi are 50mm.

10 Eliminates unauthorized removal of the bonnet.

www.ite-srl.comDWG NAME: LADV61.004.dft - REV.: - DATE: 14/06/2017 - I .T.E. s.r.l. COMMITS ITSELF TO CONSTANTLY IMPROVE ITS PRODUCTS AND THEREFORE IT RESERVES THE RIGHT TO MODIFY DATA, FEATURES W ITHOUT NOTICE.

Bar stock needle valve designed for operation with any fluid.

BAR STOCK HAND NEEDLE VALVE

MODEL:

MODEL SELECTION

MODEL MATERIAL PACKING IN OUT CODE WEIGHT NOTE

V61

6K psi

AISI 316L

PTFE 1/4" NPT-F 1/4" NPT-F

V61-06ST4N4N

0,6 Kg

ASTM A105 V61-06AT4N4N

F51 V61-06DT4N4N

F55 V61-06ET4N4N

ALLOY 400 V61-06FT4N4N

C276 V61-06GT4N4N

6MO V61-06HT4N4N

I625 V61-06IT4N4N

10K psi

AISI 316L V61-10ST4N4N

ASTM A105 V61-10AT4N4N

F51 V61-10DT4N4N

F55 V61-10ET4N4N

ALLOY 400 V61-10FT4N4N

C276 V61-10GT4N4N

6MO V61-10HT4N4N

I625 V61-10IT4N4N

I.T.E. s.r.l. COMMITS ITSELF TO CONSTANTLY IMPROVE ITS PRODUCTS AND THEREFORE IT RESERVES THE RIGHT TO MODIFY DATA, FEATURES WITHOUT NOTICE.

Packing material PTFE as standardmax temperature 180°C.

The dimensions shown apply only tothe illustrated valve – if you need thedimensions for your individual type or

should you still not find your options atall please contact the factory.

V61

100

60

30

40

50

IN

OUT

www.ite-srl.comDWG NAME: LADV61.008.dft - REV.: - DATE: 14/06/2017 - I .T.E. s.r.l. COMMITS ITSELF TO CONSTANTLY IMPROVE ITS PRODUCTS AND THEREFORE IT RESERVES THE RIGHT TO MODIFY DATA, FEATURES W ITHOUT NOTICE.

Bar stock needle valve designed for operation with any fluid.

BAR STOCK HAND NEEDLE VALVE

MODEL:

MODEL SELECTION

MODEL MATERIAL PACKING IN OUT CODE WEIGHT NOTE

V61

6K psi

AISI 316L

PTFE 1/2" NPT-F 1/2" NPT-F

V61-06ST8N8N

0,6 Kg

ASTM A105 V61-06AT8N8N

F51 V61-06DT8N8N

F55 V61-06ET8N8N

ALLOY 400 V61-06FT8N8N

C276 V61-06GT8N8N

6MO V61-06HT8N8N

I625 V61-06IT8N8N

10K psi

AISI 316L V61-10ST8N8N

ASTM A105 V61-10AT8N8N

F51 V61-10DT8N8N

F55 V61-10ET8N8N

ALLOY 400 V61-10FT8N8N

C276 V61-10GT8N8N

6MO V61-10HT8N8N

I625 V61-10IT8N8N

I.T.E. s.r.l. COMMITS ITSELF TO CONSTANTLY IMPROVE ITS PRODUCTS AND THEREFORE IT RESERVES THE RIGHT TO MODIFY DATA, FEATURES WITHOUT NOTICE.

Packing material PTFE as standardmax temperature 180°C.

The dimensions shown apply only tothe illustrated valve – if you need thedimensions for your individual type or

should you still not find your options atall please contact the factory.

V61

100

60

30

40

50

IN

OUT

NEEDLE VALVES 1 2 3 4 5 6 7 8 9 10 11 12 14 15

EX.: V 4 1 - 0 6 S T 8 I 8 I P M

V61 Needle vlv F/F 90°

06 6000 PSI10 10000 PSI

S Aisi 316LA A105D F51E F55F Monel 400G C276 HastelloyH 6 Mo/F44I Inconel 625

T TeflonG Graphoil

4 1/4"6 3/8"8 1/2"

12 3/4"20 M20 x 1,5

N NPTI BSPP GAS (ISO 1179)R BSPP GAS (EN 837-1) - Gauge connectionK BSPT R/RC (ISO 7)S Socket WeldM ISO

4 1/4"6 3/8"8 1/2"

12 3/4"20 M20 x 1,5

THREAD (Same as "IN" standard)N NPTR GAS EN 837-1 (Gauge connections)I BSPP GAS (ISO 1179)K BSPT R/RC (ISO 7)S Socket WeldM ISO

/B All component 316LC Special testingD Custom markingL Lox cleaningTI Isolate Anti-tamperK Padlock for all anti tamper bonnet

PM Panel mountingEX Up to 130mm extended lenghtT Mounted plug drain

KT Padlock for all T-bar bonnetCR Criogenic VersionP8 Internal bore 8mm

OPTIONS

OUT (Same as "IN" standard)

MODEL

RATING

MATERIAL

PACKING

IN

THREAD

V61.pdf04 - HAND VALVES