pressure sensitive adhesives - icap-sira … · adhesive tapes self-adhesive labels graphic arts...
TRANSCRIPT
Pre
ssure
Sensitive
Adhesive
s
VIA CORRIDONI, 1920015 PARABIAGO (MI) - ITALY
VAT no. - F.C. 07134250153
PHONE +39 0331 496.111FAX +39 0331 495.005
0302
Performanceand Innovation
since 1945
Founded in 1945, we are a fam-ily-owned company dedicated to the production, development and commercialization of chemical specialties for the textile and non-wovens, coatings and pressure sen-sitive adhesive sectors.We are an international, innovative and flexible partner, that meets the needs of the global market and our customer requirements. We offer a specialized, technological and high qualified service, and a wide port-folio of synthetic products and for-mulations.
Four production plants, diversi-fied and highly automated and an advanced and innovative Research and Development activity enable us to formulate excellent products and to offer an integrated and ef-ficient service to the customer, re-sulting in our distinguishing and successful characteristics such as quality and quantity flexibility.
We are constantly committed to the innovation and the sustainability of our products, investing in technolo-gy and safety.
OurPlants
Barberino di MugelloFlorenceProduction: Water-based polymers, solvent-based polymers, Compounds
Parabiago Milan Production: Water-based and solvent-based polyurethanes,tackifiers
San Mauro TorineseTurinProduction: Water-based polymers, Compounds
Casorezzo Milan Production: Dispersions and pigment pastes, acrylics and water-based and solvent-based PU Compounds
Icap-SiraCertifications
The company has adopted an integrated system for the Management of Quality, the Environment and the Health and Safety of Employees.
Trademarks & products
Complete range ofwater-based acrylic,styrene/acrylic, vinyl/acrylicpolymers and copolymers
Complete system ready to use for textilepigment printing, including wetting agents,thickeners and organic pigments suitablefor coloring of acrylic emulsions
Isocyanic and melamine-basedcross-linking agents
Siliconic productsfor water proofingtreatments of fabrics
Softeners for textilefinishing
Wetting agents, stabilizers,foam and antifoam agents
Water-based acrylicpolyurethanes
Water dispersionsof tackifiers basedon rosin, hydrocarbonand terpene resins
Water–based polyurethanedispersions, co-solvent freeand low VOC
Water-basedpolyurethane dispersions
Breathable waterproofing systemconsisting of polyurethanesin solvent and emulsion
Registered Trademarks of ICAP-SIRA Chemicals and Polymers S.p.A.
Water-based pigmentdispersions for water-basedpaints, resin dispersions andwater-based systems
Pigment dispersions in water,solvent, oil and chips for waterbased acrylic PSAs, in water,solvent, hot melt
Solventless pigmentdispersions
Pigmentdispersionsin resins andsolvents
®
PVC dispersionsin plasticizers
Solvent-based acrylic andvinyl/acrylic copolimers
Solvent-basedpolyurethanes,skin and adhesives,breathable (ICAPORE®)
Water-based polymers
Auxiliaries
Pigmentdispersions & chips
Solvent-basedpolymers
04 05
0706
PSA Applications
PSAApplications
AdhesiveTapes
Self-Adhesive Labels
Graphic Arts
ProtectiveFilms
Medical SkinContact Products
08 09
PSA
Base Polymers
Pape
r Lab
els
Film
s La
bels
Tape
s
Med
ical
Prot
ectiv
e Fi
lms
Gra
phic
Arts
Text
ile -
Foam
s
Apeo
Fre
e
Solid
Con
tent
(%±1
)
Visc
osity
Adhe
sion
Cohe
sion
Tack
Food
Con
tact
Co
mpl
ianc
e*
Wat
er-B
ased
Em
ulsi
ons
ACRILEM® 1425 60 L Vinylacrylic. Suitable for compounding with tackifiers for the production of high cohesion, extrapermanent adhesive for labelstock.
ACRILEM® 1422 60 L Vinylacrylic. High water resistance.
ACRILEM® 2155 55 L Plasticizers free, very low TG, suitable for the production of removable labels.
ACRILEM® 4357 45 G High resistance to plasticizers and high cohesive performances.
ACRILEM® 4886 60,5 L High resistance to plasticizers for applications on PVC.
ACRILEM® 4468 60 L Technical tapes. Suitable for PVC tapes.
ACRILEM® 4657 55 L General purpose acrylic, particularly suitable for PVC applications.
ACRILEM® 5120 61 G Plasticizers free, very low TG, suitable for the production of deep-freeze pressure sensitive adhesives.
ACRILEM® 5238 60,5 L General purpose for tapes and stickers.
ACRILEM® 7512 61 L Particularly suitable for the formulation of adhesives for building tapes due to its excellent adhesive properties.
ACRILEM® 7505 61 L Particularly suitable for the formulation of adhesives for building tapes due to its excellent adhesive properties. Best compromise adhesion/cohesion.
ACRILEM® 7527 61 L Particularly suitable for the formulation of adhesives for building tapes for low temperature applications.
ACRILEM® 8731 61 L Excellent adhesive properties, suitable for tapes.
ACRILEM® 10792 60 G Suitable for the formulation of products for technical tapes and labels.Good balance of adhesion and cohesion. Suitable for PVC.
ACRILEM® PS 36-468 60 L Technical tapes for the automotive sector. Harnessing tapes.
ACRILEM® WI 16-260 50 L Particularly suitable for repositionable labels and stickers.
ACRILEM® WI 16-576 63 G Vinylacrylic. Suitable for the formulation of products for technical tapes (expecially PVC insulation tapes) and labels.
ACRILEM® WI 16-421 56 L For the formulation of permanent adhesives on plastic films. Good water resistance and clear film.
ACRILEM® WI 16-036 55 L Formulation of adhesives for medical use for skin contact.
*For compliance to specific regulations, please contact our Sales Offices.
Applications Search and compare products on our website:www.icapsira.com
These technical data and suggestions are based on information we believe to be reliable and are given in good faith but without any guarantee, as conditions and methods of use of our products are beyond our control. The consumer should apply our products to his own working conditions and determine the suitability of our materials and suggestions before adopting them on a commercial scale. Nevertheless the suggestions concerning the use of our products must not be considered as recommendation for any possible patent violation.
Characteristic: Low Medium High
Applications: Main Applications. For specific applications, formulations can be customized; please contact our Sales Offices.
Viscosity: G Gravure L Low M Medium H High V Very High
® Registered Trademarks of ICAP-SIRA Chemicals and Polymers S.p.A.
10 11
PSA
Ready to Use Formulations
Pape
r Lab
els
Film
s La
bels
Tape
s
Med
ical
Prot
ectiv
e Fi
lms
Gra
phic
Arts
Text
ile -
Foam
s
Apeo
Fre
e
Solid
Con
tent
(%±1
)
Visc
osity
Adhe
sion
Cohe
sion
Tack
Food
Con
tact
Co
mpl
ianc
e*
Wat
er-B
ased
Em
ulsi
ons
ACRILEM® 215G 50 G Plasticizers free, suitable for the production of removable labels for any surface.
ACRILEM® 226G 49 G Free from phthalic plasticizers, suitable for the production of removable labels for any surface.
ACRILEM® 259G 50,5 G Free from phthalic plasticizers, particularly suitable for the production of removable labels in plastic films.
ACRILEM® 276G/52 52 G Protective films, after crosslinking with ICAPLINK® X3, X5 or X7.
ACRILEM® 282G 52 G Protective films, after crosslinking with ICAPLINK® X3, X5 or X7.
ACRILEM® 448FEG-260C 41 G The product of choice for repositionable children stickers and labels. High resistance to plasticizers. Compliant to toy regulations.
ACRILEM® 475G 50 G Protective films and application tapes with good adhesion on PE and PP treated films. It can be crosslinked with ICAPLINK® X3, X5 and X7.
ACRILEM® 495TH 53 M Semipermanent pressure sensitive adhesive, for the production of PVC and synthetic films.
ACRILEM® 538G 58,5 G Permanent adhesive for tapes and plastic films suitable for clear-films.
ACRILEM® 657RM 53,5 M Foams and textile applications.
ACRILEM® 670G 48 G Formulated specifically for wash-off labels.
ACRILEM® 792G 50 G Permanent labels of plastic films. It provides transparent films and good resistance to plasticizers.
ACRILEM® 796G 50 G Permanent labels of plastic films and protective films.
ACRILEM® 520G 50 G Very low TG, suitable for the production of deep-freeze labels.
ACRILEM® 876M 57 M Extra permanent modified pressure sensitive adhesive, suitable for different substrates (textiles, foams, etc.).
ACRILEM® 904G 53 G Adhesive paper in sheets. Very good “guillotine” behaviour due to its clean-cut properties.
ACRILEM® 925G 50 G General purpose extrapermanent for the production of paper labels.
ACRILEM® 974V 48 V SBR-based, modified pressure sensitive adhesive, suitable for the preparation of labels made of plastic with high adhesion, particularly on low polar surfaces.
ACRILEM® PS 36-291 51 GLV Ideal for clear-on-clear filmic labels.
ACRILEM® PS 36-486 50 G Crystal-clear tapes and transparent labels.
ACRILEM® PS 36-215 53 G Plasters and medical tapes, skin-contact approved. Available in different viscosities.
Applications Search and compare products on our website:www.icapsira.com
These technical data and suggestions are based on information we believe to be reliable and are given in good faith but without any guarantee, as conditions and methods of use of our products are beyond our control. The consumer should apply our products to his own working conditions and determine the suitability of our materials and suggestions before adopting them on a commercial scale. Nevertheless the suggestions concerning the use of our products must not be considered as recommendation for any possible patent violation.
Characteristic: Low Medium High
Applications: Main Applications. For specific applications, formulations can be customized; please contact our Sales Offices.
Viscosity: G Gravure L Low M Medium H High V Very High
*For compliance to specific regulations, please contact our Sales Offices.® Registered Trademarks of ICAP-SIRA Chemicals and Polymers S.p.A.
12 13
PSA
Solvent-Based Solutions
Pape
r Lab
els
Film
s La
bels
Tape
s
Med
ical
Prot
ectiv
e Fi
lms
Gra
phic
Arts
Text
ile -
Foam
s
Org
anic
Sol
vent
s
Solid
Con
tent
(%±1
)
Visc
osity
Adhe
sion
Cohe
sion
Tack
Food
Con
tact
Co
mpl
ianc
e*
Solv
ent-B
ased
Sol
utio
ns
ACRIS® 415 EA / TOL / IPA 48,5 M Self-crosslinking, vinylacrylic, very good general properties. Approved for medical use for skin contact.
ACRIS® 418 TOL / HEX / AA 54,5 H Self-crosslinking, vinylacrylic, for the preparation of crystal-clear films with good adhesion and cohesion properties. The blend of solvent used is suitable to recycling.
ACRIS® 427 EA / HEPT / IPA / AA 50 M Self-crosslinking, vinylacrylic for the preparation of crystal-clear films with good adhesion and cohesion properties. Toluene free.
ACRIS® 435 EA / HEPT / IPA / TOL / AA 45 M Self-crosslinking, vinylacrylic. The soft, low TG film, makes it suitable for applications requiring good adhesion and cohesion properties, especially at low temperatures. Easy removal of film.
ACRIS® 437 EA / HEPT / IPA / TOL / AA 48 M Self-crosslinking, acrylic with low TG and high adhesion. Adhesion increases with coating weight. Particularly suitable for aluminum.
ACRIS® 453 EA / TOL / IPA 50 H Self-crosslinking, vinylacrylic with good adhesion properties. Adhesion increases with coating weight. Approved for medical use for skin contact. Suitable for plasters.
ACRIS® 460 EA / HEPT / IPA / AA 51 H Self-crosslinking, vinylacrylic with good adhesion properties. Approved for medical use for skin contact. Particularly suitable for plasters.
ACRIS® 663 EA 40 M Vinylacrylic. For the production of protective and removable plastic films, after crosslinking.
ACRIS® 702 EA / IPA / AA 36 L Self-crosslinking, acrylic for use in graphic arts on plastic and PVC films. Low viscosity for very smooth adhesive films.
ACRIS® 707 EA / IPA / AA 36 M Self-crosslinking, acrylic with high molecular weight, suitable for the production of high cohesion technical tapes with high resistance to temperatures.
ACRIS® 715 EA / HEPT / IPA / TOL / AA 50 L Self-crosslinking, acrylic with high adhesion properties, especially at high coating weight. Suitable for technical tapes and plastic films when high adhesion is requested.
ACRIS® 725 EA / HEPT / IPA / AA 50 M Self-crosslinking, acrylic for use in graphic arts on plastic and PVC films.
ACRIS® 740 EA / IPA / AA 44 M Self-crosslinking, acrylic particularly suitable for car wrapping, with good initial repositionability.
ACRIS® 750 EA / IPA / AA 40 M Self-crosslinking, for the preparation of technical and double sided tapes. High temperatures and UV resistance properties.
ACRIS® 770 EA / IPA / AA 43 L Self-crosslinking, modified, acrylic, particularly suitable for use in technical and double sided tapes due to high adhesion on apolar surfaces and excellent temperature resistance properties.
ACRIS® 830 EA / HEPT / IPA / AA 53 L Self-crosslinking, modified, acrylic, particularly suitable for use in technical and graphic arts tapes due to high adhesion on apolar surfaces and excellent temperature resistance properties.
Auxiliaries
Aux
iliar
ies ICAPLINK® X3 Crosslinker for polymers in water-based dispersions. Aliphatic isocyanate. For polymers containing carboxy, hydroxy or amine groups.
ICAPLINK® X5 Crosslinker for polymers in water-based dispersions. Polifunctional blocked isocyanate. For polymers containing carboxy, hydroxy or amine groups.
ICAPLINK® X7 Crosslinker for polymers in water-based dispersions. Poliaziridine. For polymers containing carboxy, hydroxy or amine groups.
ICAWET® Wetting agents and defoamers.
Applications
*For compliance to specific regulations, please contact our Sales Offices.® Registered Trademarks of ICAP-SIRA Chemicals and Polymers S.p.A.
Organic Solvents: Ethyl acetate Ethanol Isopropyl alcohol Acetylacetone Toluene Heptane HexaneEA ETH IPA AA TOL HEPT HEX
Search and compare products on our website:www.icapsira.com
These technical data and suggestions are based on information we believe to be reliable and are given in good faith but without any guarantee, as conditions and methods of use of our products are beyond our control. The consumer should apply our products to his own working conditions and determine the suitability of our materials and suggestions before adopting them on a commercial scale. Nevertheless the suggestions concerning the use of our products must not be considered as recommendation for any possible patent violation.
Characteristic: Low Medium High
Applications: Main Applications. For specific applications, formulations can be customized; please contact our Sales Offices.
Viscosity: G Gravure L Low M Medium H High V Very High
14 15
Tackifiers
Apeo
Fre
e
Solid
s %
R&B
°C
Rosin Esters
ICATACK® 650 General purpose for labels and tapes. 52 62
ICATACK® 660 General purpose, excellent wetting properties. 52 61
ICATACK® 950 General purpose, very high softening point. 52 80
ICATACK® 651 General purpose for labels and tapes. 56 62
ICATACK® 951 General purpose, higher softening point. 56 80
ICATACK® 1050 General purpose, high cohesion. 60 81
ICATACK® 1070 General purpose, high adhesion and softening point. 60 87
Modified Rosin Esters
ICATACK® 742 Hydrocarbon modified, improved adhesion on low polar substrates. 57 82
Rosin Acid
ICATACK® 281 General purpose, higher softening point. 56 75
Hydrocarbon
ICATACK® 150 Specialty labels and tapes. 52 77
Applications
These technical data and suggestions are based on information we believe to be reliable and are given in good faith but without any guarantee, as conditions and methods of use of our products are beyond our control. The consumer should apply our products to his own working conditions and determine the suitability of our materials and suggestions before adopting them on a commercial scale. Nevertheless the suggestions concerning the use of our products must not be considered as recommendation for any possible patent violation.
Search and compare products on our website:www.icapsira.com
® Registered Trademarks of ICAP-SIRA Chemicals and Polymers S.p.A.
Pre
ssure
Sensitive
Adhesive
s
VIA CORRIDONI, 1920015 PARABIAGO (MI) - ITALY
VAT no. - F.C. 07134250153
PHONE +39 0331 496.111FAX +39 0331 495.005
G F
EB 2
019
– 80
0