press brake tooling

EUROPEAN STYLE

PRESS BRAKETOOLING

Your Choice for Higher

Productivity

Strength. Performance. Innovation.

March 2012

Longer tool life, less scrap and quick set-ups are what make the Wilson Tool

European Style Press Brake Tooling the first choice of fabricators worldwide.

Wilson’s unique clamping system, state-of-the-art manufacturing and exclusive

surface enhancement gives you better tooling for your money. We also offer the

world’s largest selection of Quick Change 2V and 1V dies.

WHEN UPTIME IS KEY,CHOOSE

WILSON EUROPEAN.

Change Tools in Seconds.

The Wilson Express Clamping System™ makes set-ups quick and easy. Wilson’s

ingenious system of punch holders allows most tools to be changed in a matter

of seconds. Because the Express Clamping System is designed to use standard

European style press brake tooling with a safety groove there is no need for a

special tooling.

The Strength is in the Steel.

We manufacture each and every press brake tool at our state-of-the-art

manufacturing facility to ensure total quality control and quick delivery.

Precision Ground for Less Scrap.

Wilson European Press Brake Tooling is precision ground to a tolerance of

+/- .0008” (.02mm) on all critical dimensions for increased reliability. Common

centerlines on all punches eliminate costly time spent locating the back gauge

origin position and subsequent scrap.

Hardened Tools Last Longer.

To ensure that you receive the maximum life out of your press brake tooling,

Wilson Tool uses a patented Nitrex® surface enhancement on all dies. Nitrex

provides a surface hardness of HRC-70, which increases long-term durability,

reduces galling and adds lubricity.

INDEXStandard Lengths, Special Ear Piece . . 4Bending Diagrams . . . . . . . . . . . . . .5-6Wilson Express Clamping . . . . . . . . . . 7Standard 880/900 Punches . . . . . . . . . 8Gooseneck Punches . . . . . . . . . . . .9-12880/900 Sash Punches . . . . . . . . . . . 1330° Acute-Angle Punches. . . . . . .14-1560° Acute-Angle Punches. . . . . . . . . 15Large Radius Punches . . . . . . . . . . . 1675° Punches . . . . . . . . . . . . . . .17-18Bend Limit Graphs Standard 880/900 Punch . . . . . . . . . . . . 19 Standard 880/900 Punch w/ Thin Tip . . . . . . 20 Gooseneck Punch . . . . . . . . . . . . . . .21-26 88°/ 90° Narrow Punch . . . . . . . . . . . . 27 88° Sash Punch . . . . . . . . . . . . . . . . . 28 90° Sash Punch . . . . . . . . . . . . . . . . . 29 30° Acute Angle Punch . . . . . . . . . . .30-31 75° Punches. . . . . . . . . . . . . . . . .32-36 Z2 Style Deep Punch Holder . . . . . . . . . . 37Quick Change 75° 2V Dies . . . . . . . . 38Quick Change 88°/ 900 2V Dies . . . . 39Quick Change 88° 2V Dies . . . . . . . 40Quick Change 2V Dies w/Large Shoulder Radii . . . . . . . . . . . . . . . 41Acute Angle Quick Change 2V Dies . . 41Bolt Down 2V Dies (Old Style). . . . . . 422V Dies with Large Shoulder Radii (Old Style) . . . . . . . . . . . . . . . . . . 43Sectionalized 2V Dies (Old Style). .43-45Low Profile Sectionalized 2V Dies (Old Style) . . . . . . . . . . . . . . . . . . 452V Die Rail and Clamp . . . . . . . . . . . 46Stacking Rails . . . . . . . . . . . . . . . . . 46AM to Euro Quick Change 2V Die . . . 462V Die Holders . . . . . . . . . . . . . . . . 46Quick Change 88°/ 900 1V Dies . . . . 47Low Profile Quick Change 88°/ 900 1V Dies. . . . . . . . . . . . . . . . . . . . 4730° Acute Angle Quick Change 1V Dies . . . . . . . . . . . . . . . . . . . 48 Quick Change 75° 1V Dies . . . . . . . . 49Quick Change 1V Die Holder and Wedge Block . . . . . . . . . . . . . . . . 50Acute Angle 30° . . . . . . . . . . . . . . . 51 Large 45°, 85°, 80° 1V Dies . . . .51-544 Way Die . . . . . . . . . . . . . . . . . . . 54Rail Style Offset Tools . . . . . . . . . . . 55 Quick Change Rail-Style Flattening Dies . . . . . . . . . . . . . . . . . . . . . . 56 30° 3V Hemming Die. . . . . . . . . . . . 56 Flattening Dies and Punches . . . . .56-57Hemming Dies. . . . . . . . . . . . . . .58-59 Accessories . . . . . . . . . . . . . . . . . . 60 Urethane Holders & Pads . . . . . . . . . 61 Urethane Products. . . . . . . . . . . . . . 62 Z1/Z2 Narrow Punch Holders . . . .63-64 Stacking Punch Holder . . . . . . . . . . . 65Dual Clamping Kits . . . . . . . . . . . . . 65European Punch & Die Holder . . . . . . 66Tooling Cabinet . . . . . . . . . . . . . . . . 67Urethane Rolls. . . . . . . . . . . . . . . . . 67Measuring Devices. . . . . . . . . . . . . . 67Air Bending Force Charts . . . . . . .68-69

SAVE TIME AND MONEY WITH THEWILSON EXPRESS CLAMPING SYSTEM.TM

Amada® Z2 Style Press Brakes

American Press Brakes

Amada® Z1 and most European (Promecam®)

Style Press Brakes

Trumpf® Press Brakes

Available for virtually any make and model of press brake, the Wilson Express

Clamping System is uniquely designed to increase your productivity and reduce your

operating costs.

Load Punches in a Snap.Loading punches has never been easier. The Wilson Express Clamping system

completely eliminates the need to slide punches in from the end of the machine.

Simply place 16.34” (415mm) long punches or individual pieces of sectionalized

punches under the clamps and push them upward. The spring-loaded clamps

capture the punch via safety groove and hold it in place until the clamps are locked.

To lock the clamps, simply push the removable lever upward.

Unload Punches Quickly and Easily.Again, Wilson has eliminated the need to slide punches to the end of the machine.

Simply pull down the locking lever to unlock the clamp. Or, to remove smaller punch

sections, pushing inward on the tops of the clamps opens the clamps and allows

the operator to pull individual sections straight down. Clamps that are not in use

can easily be removed from the punch holders by hand.

No Special Tooling Required.Wilson Express Clamping Systems can be used with any standard European

(Promecam®) style press brake tooling with a safety groove. You can use the same

high quality Wilson tooling you currently own, without having to repurchase the

system for every tool you order.

Fewer Maintenance Costs.Because the Wilson Express Clamping System is mechanical rather than hydraulic,

maintenance costs are virtually eliminated. And with no hydraulics there’s no risk of

power failures causing clamps to release unexpectedly.

Dual Clamping Available.A dual clamping feature is available on all Wilson Express Clamping Systems for an

additional cost. This added feature allows you to load punches with the safety

groove facing forward or to the rear of the machine. Both front and rear clamps

are opened and closed simultaneously when the locking lever is actuated.

For a free demonstration, or for more information on the Express Clamping

System™, please contact your local Wilson Tool International® sales engineer or

our application sales desk at 800.445.4518.

4Standard Punch LengthS

Toll Free U.S.A. & CanadaTel: 800-445-4518Fax: 800-539-4590

Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096

Website & [email protected]

LocalTel: 651-286-6001Fax: 651-286-5959

16.339[ 415 ](ST)

[ 835 ]32.875(LT)

[ 835 ]32.875(XT)

1. MOST TOOLS CAN BE EASILY LOADED BY A SINGLE OPERATOR.

2. EASY TO STORE.3. ALL SECTIONALIZED TOOLS COME PRE-CUT IN

NINE DIFFERENT PIECES.4. MOST SECTIONALIZED PUNCHES INCLUDE TWO

EAR PIECES (HORNS).5. SPECIAL TOOLING AvAILABLE. PLEASE

CONTACT THE APPLICATION SALES DESk.

SECTION WIDTHS:3.937" (100mm) LEFT EAR / 3.937" (100mm) RIGHT EAR / .394" (10mm) / .591" (15mm) / .787" (20mm) / 1.575" (40mm) / 1.969" (50mm) / 7.874" (200mm) / 11.811" (300mm)

FEATURES:1. MOST TOOLS CAN BE EASILY LOADED BY A

SINGLE OPERATOR.2. EASY TO STORE.3. ALL SECTIONALIZED TOOLS COME PRE-CUT IN

NINE DIFFERENT PIECES.4. NITREX™ (HRC-70) IS STANDARD ON EvERY DIE

IN THE TOOLING LINE.5. SPECIAL TOOLING AvAILABLE. PLEASE

CONTACT THE APPLICATION SALES DESk.

SECTION WIDTHS:3.937" (100mm) / 3.937" (100mm) / .394" (10mm) / .591" (15mm) / .787" (20mm) / 1.575" (40mm) / 1.969" (50mm) / 7.874" (200mm) / 11.811" (300mm)

Note: Special lengths are available at additional cost.

Note: Special lengths are available at additional cost.

16.339[ 415 ](ST)

[ 835 ]32.875(LT)

[ 835 ]32.875(XT)

Standard dIe LengthS

SPecIaL ear PIece

When ordering a special ear section from Wilson Tool, please indicate the following dimensions.

“C”

“W”

“A”

R.375

“B”

LARGE RADIUS PUNCHESPAGE

LARGE 1V DIESPAGE

1300


URETHANE PADSPAGE

URETHANE HOLDERSPAGE

1500

5.118[ 130 ]

STANDARD PUNCHESPAGE

QUICK CHANGE 2V DIESPAGE

2V DIE HOLDERSPAGE

DIE RAILPAGE

100

GOOSENECK PUNCHESWITH THIN TIPPAGE


2V DIE HOLDERSPAGE

DIE RAILPAGE

400

DEEP GOOSENECK PUNCHESPAGE

2V DIESPAGE

2V DIE HOLDERSPAGE

300

these are the right size

EXTRA PARTS

5.118[ 130 ]

NARROW 1V DIEHOLDERSPAGE

NARROW 1V DIESPAGE

SASH PUNCHESPAGE

600

LARGE 1V DIESPAGE


1200


2V DIE HOLDERSPAGE

DIE RAILPAGE

NARROW PUNCHESPAGE

500

STANDARD PUNCHESWITH THIN TIPPAGE


2V DIE HOLDERSPAGE

DIE RAILPAGE

200

STANDARD PUNCHESPAGE 8

STANDARD PUNCHESWITH THIN TIPPAGE 8

NARROW PUNCHESPAGE 12

QUICk CHANGE 2v DIESPAGE 38-41




2v DIE HOLDERSPAGE 46

2v DIE RAILPAGE 46

2v DIE HOLDERS PAGE 46

2v DIE RAIL PAGE 46


2v DIE RAILPAGE 46

LARGE RADIUS PUNCHESPAGE 16



LARGE 1v DIESPAGE 51-54

LARGE 1v DIESPAGE 51-54

URETHANE PADSPAGE 61


2v DIE RAILPAGE 46

SASH PUNCHESPAGE 13

GOOSENECk PUNCHESWITH THIN TIPPAGE 10


QUICk CHANGE 1v DIE HOLDERSPAGE 50

URETHANE HOLDERSPAGE 61

2v DIESPAGE 42-45

GOOSENECk PUNCHESPAGE 9


90 DEGREE BENDING(27 GA - 10 GA)

90 DEGREE BENDING WITHTHIN TIP GOOSENECK PUNCH

90 DEGREE BENDING WITH GOOSENECK PUNCH

90 DEGREE BENDING(SASH)

LARGERADIUS BENDING

90 DEGREE BENDINGWITH NARROW PUNCH

90 DEGREE BENDINGWITH THIN TIP PUNCH

90 DEGREE BENDING(3/8" - 1/2")

3V HEMMING DIESPAGE

FLATTENING PUNCHESPAGE

1000

FLATTENING PUNCHESPAGE

FLATTENING DIESPAGE

1100

OFFSET TOOLSPAGE

2V DIE HOLDERSPAGE

DIE RAILPAGE

1800

HEMMING(27 GA - 16 GA)

HEMMING(27 GA - 11 GA)

OFFSET BENDING(27 GA - 16 GA)

FLATTENING PUNCHESPAGE 57

FLATTENING PUNCHESPAGE 57

RAIL STYLE OFFSET TOOLSPAGE 55


2v DIE RAILPAGE 46

FLATTENING DIESPAGE 56

3v HEMMING DIESPAGE 56

ACUTE ANGLE PUNCHESPAGE

ACUTE ANGLE LARGE1V DIESPAGE

1400


ACUTE ANGLE QUICKCHANGE 2V DIESPAGE

2V DIE RAILSPAGE

2V DIE HOLDERSPAGE

700

STANDARD PUNCH HOLDER(SUPPLIED WITH MACHINE)OR NARROW PUNCH HOLDERSPAGE

STACKING PUNCH HOLDEROR NARROW PUNCH HOLDERSPAGE


LOW PROFILE NARROW1V DIESPAGE

NARROW 1V DIE HOLDERSPAGE

1900

DEEP PUNCH HOLDERPAGE


1600


EXTRA PARTS

5.118[ 130 ]


LARGE 1V DIESPAGE

900


HEMMING DIES

STEP 1

PAGE

STEP 2

800

ACUTE-ANGLE BENDING(12 GA - 6 GA)

ACUTE-ANGLE BENDING(27 GA - 14 GA) DEEP BOX BENDING DEEP PUNCH HOLDER

90 DEGREE BENDING(9 GA - 3/8")

HEMMING (2 STAGE)(27 GA - 14 GA)

ACUTE ANGLE PUNCHESPAGE 14-15 ACUTE ANGLE

PUNCHESPAGE 14-15

ACUTE ANGLE PUNCHES PAGE 14-15

STEP 1

STEP 2

HEMMING DIESPAGE 58-59LARGE

1v DIESPAGE 51-54

DEEP PUNCH HOLDERPAGE 64STANDARD PUNCH HOLDER

(SUPPLIED WITH MACHINE)OR NARROW PUNCH HOLDERS PAGE 63


LOW PROFILE QUICk CHANGE 1v DIES PAGE 47

QUICk CHANGE 1v DIE HOLDERS PAGE 50


ACUTE ANGLE LARGE 1v DIESPAGE 51

ACUTE ANGLE PUNCHESPAGE 14-15

ACUTE ANGLE QUICkCHANGE 2v DIEPAGE 41

2v DIE RAILPAGE 42-45


STACkING PUNCH HOLDER PAGE 65

NARROW PUNCH HOLDER PAGE 63

7 WILSon exPreSS cLamPIng SyStem™




LocalTel: 651-286-6001Fax: 651-286-5959

*Note: Other Punch Holders Shown On Pages 63-66

Z2 Series With Wedge HEIGHT PRICE

43818I-2 2 Front Clamp Plates 120mm

43818I 2 Front & 2 Back Clamp Plates 120mm

Conventional Press Brakes With Wedge HEIGHT PRICE

43815-2 2 Front Clamp Plates 100mm

43815 2 Front & 2 Back Clamp Plates 100mm

Z1 Series With Wedge HEIGHT PRICE

43817I-2 2 Front Clamp Plates 100mm

43817I 2 Front & 2 Back Clamp Plates 100mm

Trumpf Press Brakes With Wedge HEIGHT PRICE

43819-2 2 Front Clamp Plates 100mm

43819 2 Front & 2 Back Clamp Plates 100mm

Mitsubishi Toyokoki HEIGHT PRICE

43031HYB Series Press Brakes Dual Clamping

Included70mm

Mitsubishi Toyokoki HEIGHT PRICE

43033APB Series Press Brakes Dual

Clamping Included70mm

exPreSS cLamP torque Wrench KIt

CAT. No.

0800208003437260679306795

COMPONENT

Complete kitCasePivot

WrenchHex Tip

PRICE

8Standard 88˚ & 90˚ PuncheS




LocalTel: 651-286-6001Fax: 651-286-5959

R .354[ 9 ]

R .197[ R 5 ]

.394[ 10 ]

1.378[ 35 ]

1.181[ 30 ]

"H"

1.378[ 35 ]

Part No. 40002

(Ear Pirce)

A

(Ear Piece)

Part No. 40212

"H"

R.158

[ 4.02 ]

.394[ 10 ].197

[ 5 ]

R .197[ R 5 ]

.394[ 10 ]

(Ear Piece)

1.181[ 30 ]

A

(Ear Piece)

Note: Punch tip modifications and punch relief available at an additional cost. Contact the application sales desk for pricing and lead times.

Part No. 40212

"H"

R.158

[ 4.02 ]

.394[ 10 ].197

[ 5 ]

R .197[ R 5 ]

.394[ 10 ]

(Ear Piece)

1.101[ 27.97]

A

R .354[ 9 ]

R .197[ R 5 ]

.394[ 10 ]

1.378[ 35 ]

1.101[ 27.97]

"H"

1.378[ 35 ]

Part No. 40002

(Ear Pirce)

A

Standard 88˚ & 90˚ PuncheS With thin tiP

Bend Limit Graph - Page 20

CAT. No.MAX. TON

FT / METER(LT & ST)

40002400084001540023400304010240108401154012340130

.008

.030

.060

.090

.120

.008

.030

.060

.090

.120

[0.2][0.8][1.5][2.3][3.0][0.2][0.8][1.5][2.3][3.0]

30 / 10030 / 10030 / 10030 / 10030 / 10030 / 10030 / 10030 / 10030 / 10030 / 100

2.634 [66.9]2.624 [66.6]2.612 [66.3]2.598 [66.0]2.586 [65.7]2.634 [66.9]2.624 [66.7]2.613 [66.4]2.600 [66.0]2.588 [65.7]

14 / 4714 / 4714 / 4714 / 4714 / 4714 / 4714 / 4714 / 4714 / 4714 / 47

AANGLE

RTIP RADIUS

INCHES [mm]

HHEIGHT

INCHES [mm]

88˚88˚88˚88˚88˚90˚90˚90˚90˚90˚

MAX. TONFT / METER

(XT)

ST16.34”

(415mm)

LT32.87”

(835mm)

XT 32.87"

(835mm)

CAT. No.MAX. TON

FT / METER(LT & ST)

4021240202

.008

.008[0.2][0.2]

6 / 206 / 20

2.634 [66.9]2.634 [66.6]

3 / 103 / 10

AANGLE

RTIP RADIUS

INCHES [mm]

HHEIGHT

INCHES [mm]

88˚90˚

MAX. TONFT / METER

(XT)

ST16.34”

(415mm)

LT32.87”

(835mm)

XT 32.87"

(835mm)

Part No. 40402

"H"

.354[ 9 ]

R

1.378[ 35 ]

1.378[ 35 ]

R .197[ R 5 ]

.394 (Ear Piece)[ 10 ]


1.181[ 30 ]

A(Ear Piece)

.354[ 9 ]

.394[ 10 ]

R .197[ R 5 ]

1.378[ 35 ]

1.378[ 35 ]

Part

No.

403

02

(Ear Piece)R

"H"

1.181[ 30 ]

A(Ear Piece)

.354[ 9 ]

.394[ 10 ]

R .197[ R 5 ]

1.378[ 35 ]

1.378[ 35 ]

Part

No.

403

02

(Ear Piece)R

"H"

1.101[ 27.97]

A

Part No. 40402

"H"

.354[ 9 ]

R

1.378[ 35 ]

1.378[ 35 ]

R .197[ R 5 ]

.394 (Ear Piece)[ 10 ]


1.101[ 27.97]

A

9 88˚ GooSeneck PuncheS

88˚ & 90˚ GooSeneck PuncheSBend Limit Graph - Page 21





LocalTel: 651-286-6001Fax: 651-286-5959

CAT. No.MAX. TON

FT / METER(LT, ST & XT)

4030240308

.008

.030[0.2][0.8]

15 / 5015 / 50

4.721 [119.9]4.711 [119.7]

AANGLE

RTIP RADIUS

INCHES [mm]

HHEIGHT

INCHES [mm]

88˚88˚

ST16.34”

(415mm)

LT32.87”

(835mm)

XT 32.87"

(835mm)

CAT. No.MAX. TON

FT / METER(LT & ST)

4040240408404154043040502

.008

.030

.060

.120

.008

[0.2][0.8][1.5][3.0][0.2]

15 / 5015 / 5015 / 5015 / 5015 / 50

4.130 [104.9]4.120 [104.6] 4.108 [104.3]4.082 [103.7] 4.130 [104.9]

14 / 47 14 / 47 14 / 47 14 / 47 14 / 47

AANGLE

RTIP RADIUS

INCHES [mm]

HHEIGHT

INCHES [mm]

88˚88˚ 88˚ 88˚ 90˚

MAX. TONFT / METER

(XT)

ST16.34”

(415mm)

LT32.87”

(835mm)

XT 32.87"

(835mm)


"H"

.354[ 9 ]

R

1.378[ 35 ]

1.378[ 35 ]

R .197[ R 5 ]

.394[ 10 ]

WT-40602

1.181[ 30 ]

A

(Ear Piece)

.984[ 25 ]

.394[ 10 ]

R .394[ R 10 ]

1.181[ 30 ]

"H"

R.236[ 6 ]

WT-40702

1.181[ 30 ]

A

(Ear Piece)

.984[ 25 ]

.394[ 10 ]

R .394[ R 10 ]

1.181[ 30 ]

"H"

R.236[ 6 ]

WT-40702

1.101[ 27.97]

A

"H"

.354[ 9 ]

R

1.378[ 35 ]

1.378[ 35 ]

R .197[ R 5 ]

.394[ 10 ]

WT-40602

1.101[ 27.97]

A


1088˚ GooSeneck PuncheS

88˚ & 90˚ GooSeneck PuncheS With thin tiPBend Limit Graph - Page 23





LocalTel: 651-286-6001Fax: 651-286-5959

CAT. No.MAX. TON

FT / METER(LT & ST)

40602406084061540630

[0.2][0.8][1.5][3.0]

21 / 7021 / 7021 / 70 21 / 70

3.539 [89.9]3.529 [89.6] 3.517 [89.3]3.491 [88.7]

14 / 47 14 / 47 14 / 47 14 / 47

AANGLE

RTIP RADIUS

INCHES [mm]

HHEIGHT

INCHES [mm]

88˚88˚ 88˚ 88˚

MAX. TONFT / METER

(XT)

ST16.34”

(415mm)

LT32.87”

(835mm)

XT 32.87"

(835mm)

CAT. No.MAX. TON

FT / METER(LT & ST)

40702407084071240718

.008

.030

.008

.030

[0.2][0.8][0.2][0.8]

15 / 50 15 / 50 15 / 50 15 / 50

3.539 [89.9]3.529 [89.6] 3.539 [89.9]3.530 [89.7]

9 / 30 9 / 30 9 / 30 9 / 30

AANGLE

RTIP RADIUS

INCHES [mm]

HHEIGHT

INCHES [mm]

88˚88˚ 90˚ 90˚

MAX. TONFT / METER

(XT)

ST16.34”

(415mm)

LT32.87”

(835mm)

XT 32.87"

(835mm)

.008

.030

.060

.120

11 85˚- 90˚ Z2 Style GooSeneck Punch

.787 [20]

9.568 [243]THEO. SHARP

.751 [19.1]

R

A

.925 - .950[23.5 - 24.1]

Reference only,Varies by angleand radius.

1.101[ 27.97]





LocalTel: 651-286-6001Fax: 651-286-5959

Note: This punch mounts to Z2 upper beam. Please call sales desk for further explanation.

Cat. No. AAngle

RTip Radius

Max. TonFt/Meter

(ST)

PRICE(ST)

43080c 85˚- 90˚ .008 - .7 [0.2 - 17.75] 25 / 83

1285˚ GooSeneck PuncheS

*Note: Sectionalized version does not include ear pieces (horns). Ear pieces (horns) available at an additional cost. Punch tip modifications and punch relief available at an additional cost. Contact the application sales desk for pricing and lead times.

"H"

.590[ 15 ]R .394

[ 10 ]

R .197 [ R 5 ]

1.378[ 35 ]

1.378[ 35 ]

44540

EAR PIECE

1.181[ 30 ]

A

(Ear Piece)

"H"

.590[ 15 ]R .394

[ 10 ]

R .197 [ R 5 ]

1.378[ 35 ]

1.378[ 35 ]

44540

EAR PIECE

1.101[ 27.97]

A

2.756[ 70 ] .236

[ 6 ]

"H"

R

WT-40902

1.101[ 27.97]

A






LocalTel: 651-286-6001Fax: 651-286-5959

88˚ & 90˚ narroW PuncheS

CAT. No.MAX. TON

FT / METER(LT & ST)

4454044560

.188

.250[4.8][6.4]

30 / 10030 / 100

4.134 [105.0]4.105 [104.3]

14 / 4714 / 47

AANGLE

RTIP RADIUS

INCHES [mm]

HHEIGHT

INCHES [mm]

85°85°

MAX. TONFT / METER

(XT)

ST16.34”

(415mm)

LT32.87”

(835mm)

XT 32.87"

(835mm)

CAT. No.MAX. TON


4080240902

.008

.008[0.2][0.2]

15 / 5015 / 50

3.740 [95.0]3.740 [95.0]

AANGLE

RTIP RADIUS

INCHES [mm]

HHEIGHT

INCHES [mm]

88˚90˚

ST16.34”

(415mm)

LT32.87”

(835mm)

XT 32.87"

(835mm)

R .394[ R 10 ]

.984[ 25 ]

.394[ 10 ]

.394[ 10 ]

"H"

.315[ 8 ]

R.788[ 20 ]

WT-41002

1.181[ 30 ]

A

13 88˚ SaSh PuncheS


R .394[ R 10 ]

.984[ 25 ]

.394[ 10 ]

.394[ 10 ]

"H"

.315[ 8 ]

R.788[ 20 ]

WT-41002

1.101[ 27.97 ]

A

.394[ 10 ]

"H"

.315[ 8 ]

R

.984[ 25 ]

R .394[ R 10 ]

.394[ 10 ]

.788[ 20 ]

WT-41202

1.101[ 27.97 ]

A(Ear Piece)



88˚ & 90˚ SaSh PuncheS




LocalTel: 651-286-6001Fax: 651-286-5959

CAT. No.A

ANGLE

R TIP RADIUS

INCHES [mm]

H HEIGHT INCHES

[mm]

MAX. TON FT / METER (LT, ST & XT)

LT 32.87"

(835mm)

ST 16.34"

(415mm)

XT 32.87"

(835mm)

41002 88˚ .008 [0.2] 3.993 [99.0] 10/30

CAT. No.A

ANGLE

R TIP RADIUS

INCHES [mm]

H HEIGHT INCHES

[mm]

MAX. TON FT / METER (LT, ST & XT)

LT 32.87"

(835mm)

ST 16.34"

(415mm)

XT 32.87"

(835mm)

41102 88˚ .008 [0.2] 2.752 [69.9] 10/3041202 90˚ .008 [0.2] 2.752 [69.9] 10/30

1430˚ acute-anGle PuncheS

"H"

R

.788[ 20 ]

R .315[ R 8 ]

.472[ 12 ]

.709[ 18 ]

WT-41308

1.101[ 27.97 ]

A

"H".788[ 20 ]

R .315[ R 8 ]

.472[ 12 ]

.788[ 20 ]

41908

R .709[ 18 ](Ear Piece)

1.101[ 27.97]

A

(Ear Piece)






LocalTel: 651-286-6001Fax: 651-286-5959

CAT. No.MAX. TON

FT / METER(LT & ST)

41908 .030 [0.8] 30 / 1004.095 [104.0] 6 / 20

AANGLE

RTIP RADIUS

INCHES [mm]

HHEIGHT

INCHES [mm]

30˚

MAX. TONFT / METER

(XT)

ST16.34”

(415mm)

LT32.87”

(835mm)

XT 32.87"

(835mm)

CAT. No.MAX. TON


4131541330

.060

.120[1.5][3.0]

30 / 10030 / 100

4.016 [102.0] 3.846 [97.7]

AANGLE

RTIP RADIUS

INCHES [mm]

HHEIGHT

INCHES [mm]

30˚30˚

ST16.34”

(415mm)

LT32.87”

(835mm)

XT 32.87"

(835mm)

15 30˚ acute-anGle PuncheS

60˚ acute-anGle PuncheS


Part No. 42610

"H"

.718[ 18.24 ]

R

1.101[ 27.97 ]

A

"H"

R

WT-41440

1.101[ 27.97 ]

A





LocalTel: 651-286-6001Fax: 651-286-5959

CAT. No.MAX. TON

FT / METER(L, S & X)

4144041460

.188

.236[4.8][6.0]

30 / 10030 / 100

2.607 [66.2]2.559 [65.0]

AANGLE

RTIP RADIUS

INCHES [mm]

HHEIGHT

INCHES [mm]

60˚60˚

ST16.34”

(415mm)

LT32.87”

(835mm)

XT 32.87"

(835mm)

CAT. No.MAX. TON

FT / METER(L, S & X)

42610 .030 [0.8] 30 / 1002.579 [65.5]

AANGLE

RTIP RADIUS

INCHES [mm]

HHEIGHT

INCHES [mm]

30˚

ST16.34”

(415mm)

LT32.87”

(835mm)

XT 32.87"

(835mm)

16Large radIuS PuncheS

"H"

R .875[ R 22.2 ]

WT-41722

1.101[ 27.97 ]

"H"

R 1.000[ R 25.4 ]

WT-41725

1.101[ 27.97 ]

*Note: Sectionalized version does not include ear pieces (horns). Ear pieces (horns) available at an additional cost. Additional radii available, please contact our application sales desk.

"H"

R .375 [ R 9.5 ]

WT-41709

1.101[ 27.97 ]

"H"

R .500 [ R 12.7 ]

WT-41712

1.101[ 27.97 ]

"H"

R .625[ R 15.9 ]

WT-41715

1.101[ 27.97 ]

"H"

R .750[ R 19 ]

WT-41719

1.101[ 27.97 ]




LocalTel: 651-286-6001Fax: 651-286-5959

41709

41719

41712

41722

41715

41725

CAT. No.ST

16.34” (415mm)

41709417124171541719 4172241725

HHEIGHT

INCHES [mm]

MAX. TONFT / METER

(L, S & X)

LT32.87”

(835mm)

3.268 [83.0]3.504 [89.0] 3.425 [87.0]3.583 [91.0] 3.701 [94.0]3.780 [96.0]

XT 32.87"

(835mm)

30 / 10030 / 10030 / 10030 / 10030 / 10030 / 100

17 75˚ PuncheS

R .197[ R 5 ]

1.378[ 35 ]

"H"

.377[ 9.6 ]

R

1.378[ 35 ]

.394[ 10 ]

44000

1.181[ 30 ]

A

(Ear Piece)

1.378[ 35 ]

.394[ 10 ]

1.378[ 35 ]

R .197[ R 5 ]

R

"H"

.394[ 10 ]

44030

1.181[ 30 ]

A

(Ear Piece)

*Note: Punch tip modifications and punch relief available at an additional cost. Contact the application sales desk for pricing and lead times.

R .197[ R 5 ]

1.378[ 35 ]

"H"

.377[ 9.6 ]

R

1.378[ 35 ]

.394[ 10 ]

44000

1.101[ 27.97]

A

1.378[ 35 ]

.394[ 10 ]

1.378[ 35 ]

R .197[ R 5 ]

R

"H"

.394[ 10 ]

44030

1.101[ 27.97 ]

A






LocalTel: 651-286-6001Fax: 651-286-5959

CAT. No.MAX. TON

FT / METER(LT & ST)

440004400144003

.030

.060

.120

[0.8][1.5][3.0]

30 / 10030 / 10030 / 100

2.662 [67.6] 2.645 [67.2] 2.607 [66.2]

14 / 4714 / 4714 / 47

AANGLE

RTIP RADIUS

INCHES [mm]

HHEIGHT

INCHES [mm]

75° 75° 75°

MAX. TONFT / METER

(XT)

ST16.34”

(415mm)

LT32.87”

(835mm)

XT 32.87"

(835mm)

CAT. No.MAX. TON


440304403144033

.030

.060

.120

[0.8][1.5][3.0]

15 / 50 15 / 50 15 / 50

4.724 [120.0]4.707 [119.5]4.669 [118.6]

AANGLE

RTIP RADIUS

INCHES [mm]

HHEIGHT

INCHES [mm]

75° 75° 75°

ST16.34”

(415mm)

LT32.87”

(835mm)

XT 32.87"

(835mm)

1.378[ 35 ]

.394[ 10 ]

1.378[ 35 ]

R .197[ R 5 ]

R

"H"

.394[ 10 ]

44020

1.181[ 30 ]

A(Ear Piece)

(Ear Piece)

*Note: Sectionalized version does not include ear pieces (horns). Ear pieces (horns) available at an additional cost (44010). Punch tip modifications and punch relief available at an additional cost. Contact the application sales desk for pricing and lead times.

1.378[ 35 ]

.394[ 10 ]

1.378[ 35 ]

R .197[ R 5 ]

R

"H"

.394[ 10 ]

44020

1.101[ 27.97 ]

A

R

"H"

.187[ 4.8 ]

44010

1.101[ 27.97 ]

A

.394[ 10 ]

"H"

1.101[ 27.97 ]

.394[ 10 ]

A

1875˚ PuncheS

4401044040

Bend Limit Graph - Page 32 Bend Limit Graph - Page 34

Bend Limit Graphs - Page 35-36




LocalTel: 651-286-6001Fax: 651-286-5959

CAT. No.MAX. TON

FT / METER(LT & ST)

44020 .030 [0.8] 21 / 703.543 [90.0] 14 / 47

AANGLE

RTIP RADIUS

INCHES [mm]

HHEIGHT

INCHES [mm]

75˚

MAX. TONFT / METER

(XT)

ST16.34”

(415mm)

LT32.87”

(835mm)

XT 32.87"

(835mm)

CAT. No.A

ANGLE

R TIP RADIUS

INCHES [mm]

H HEIGHT

INCHES [mm]

MAX. TON FT / METER

(LT & ST)

MAX. TON FT / METER

(XT)

LT 32.87"

(835mm)

ST 16.34"

(415mm)

XT 32.87"

(835mm)

44010 75˚ .030 [0.8] 3.740 [95.0] 15/50 15/5044040 75˚ .030 [0.8] 6.299 [160.0] 15/50 14/47

“B”( T.S. ).394

[ 10 ]

1.378[ 35 ]R .197

[ R 5 ]

1

2

3

4

5

6

7

8

1 2 3 4 5 6 7

L

W

W

L

40002SLS

Z1 STYLE(DASHED LINES)

Z2 STYLE(SOLID LINES)

19 Bend LImIt graPhSTANDARD 88° & 90° PUNCHES

Product Details - Page 8




LocalTel: 651-286-6001Fax: 651-286-5959

ANGLE 88 90

CAT. No.

40002 40102

40008 40108

40015 40115

40030 40130

1

2

3

4

5

6

7

8

1 2 3 4 5 6 7

L

W

L

W

40202SLS



20Bend LImIt graPhSTANDARD 88° & 90° PUNCHES WITH THIN TIP





LocalTel: 651-286-6001Fax: 651-286-5959

ANGLE 88 90

CAT. No. 40212 40202

1

2

3

5

6

7

8

1 2 3 4 5 6 7

L

4

L

W

W

40302SLS



21 Bend LImIt graPh88° GOOSENECK PUNCH





LocalTel: 651-286-6001Fax: 651-286-5959

ANGLE 88

CAT. No.40302

40308

1

2

3

4

5

6

7

8

1 2 3 4 5 6 7

L

L

W

W



40402SLS

22Bend LImIt graPh88° & 90° GOOSENECK PUNCHES





LocalTel: 651-286-6001Fax: 651-286-5959

ANGLE 88 90

CAT. No.

40402 40502

40408

40415

40430

1

2

3

5

6

7

8

1 2 3 4 5 6 7

L

W

L

W

WT-40602.08.15.30.PB



4






LocalTel: 651-286-6001Fax: 651-286-5959

ANGLE 88

CAT. No.

40602

40608

40615

40630

1

2

3

4

5

6

7

8

1 2 3 4 5 6 7

L

W

L

W

WT-40702.40708.PB



24Bend LImIt graPh88° & 90° GOOSENECK PUNCHES WITH THIN TIP





LocalTel: 651-286-6001Fax: 651-286-5959

ANGLE 88 90

CAT. No.40702 40712

40708 40718

L

W

L

W

25 Bend LImIt graPh85° - 90° Z2 STYLE GOOSENECK PUNCH





LocalTel: 651-286-6001Fax: 651-286-5959

ANGLE 85-90

CAT. No. 43080

26Bend LImIt graPh85° GOOSENECK PUNCH

W

L

W

WT-44540.44560.PB GRAPH



1

2

3

5

6

7

8

1 2 3 4 5 6 7

L

4





LocalTel: 651-286-6001Fax: 651-286-5959

ANGLE 85

CAT. No.44540

44560

27 Bend LImIt graPh88° & 90° NARROW PUNCHES


1

2

3

4

5

6

7

8

1 2 3 4 5 6 7

L

W

L

W

WT-40802.40902.PB






LocalTel: 651-286-6001Fax: 651-286-5959

ANGLE 88 90

CAT. No. 40802 40902

28Bend LImIt graPh88° SASH PUNCH

1

2

3

5

6

7

8

1 2 3 4 5 6 7

L

W

L

W

WT-41002.PB



4





LocalTel: 651-286-6001Fax: 651-286-5959

ANGLE 88

CAT. No. 41002

1

2

3

4

5

6

7

8

1 2 3 4 5 6 7

L

W

L

W

WT-41102. 41202.PB




29 Bend LImIt graPh90° SASH PUNCH




LocalTel: 651-286-6001Fax: 651-286-5959

ANGLE 88 90

CAT. No. 41102 41202

1

2

3

5

6

7

8

1 2 3 4 5 6 7

L

4

L

W

W

41908SLS



30Bend LImIt graPh30° ACUTE ANGLE PUNCH





LocalTel: 651-286-6001Fax: 651-286-5959

ANGLE 30

CAT. No. 41908

1

2

3

4

5

6

7

8

1 2 3 4 5 6 7

L

L

W

W

42610SLS



31 Bend LImIt graPh30° ACUTE ANGLE PUNCH





LocalTel: 651-286-6001Fax: 651-286-5959

ANGLE 30

CAT. No. 42610

1

2

3

5

6

7

8

1 2 3 4 5 6 7

L

4

L

W

W

44000



32Bend LImIt graPh75° STANDARD PUNCH





LocalTel: 651-286-6001Fax: 651-286-5959

ANGLE 75

CAT. No.

44000

44001

43001

1

2

3

4

5

6

7

8

1 2 3 4 5 6 7

L

L

W

W

44030








LocalTel: 651-286-6001Fax: 651-286-5959

ANGLE 75

CAT. No.

44030

44031

43033

1

2

3

5

6

7

8

1 2 3 4 5 6 7

L

4

L

W

W

44020








LocalTel: 651-286-6001Fax: 651-286-5959

ANGLE 75

CAT. No. 44020

1

2

3

4

5

6

7

8

1 2 3 4 5 6 7

L

L

W

W

44010



35 Bend LImIt graPh75° NARROW PUNCH





LocalTel: 651-286-6001Fax: 651-286-5959

ANGLE 75

CAT. No. 44010

1

2

3

4

5

6

7

8

1 2 3 4 5 6 7

L

L

W

W








LocalTel: 651-286-6001Fax: 651-286-5959

ANGLE 75

CAT. No. 44040

3737 Bend LImIt graPh

ToLL FrEE MExiCoTel: 001-800-741-2510Fax: 001-800-544-2096

WEbSiTE & [email protected]

CATALOG NO.43002

1

2

3

4

5

6

7

9

8

1 2 3 4 5 6 7 8 9

L

W

L

W

37

Z2 STYLE DEEP PUNCH HOLDER


CAT. No. 43002

38Quick chanGe 75° 2V dieS

1.811[ 46 ]

.630[ 16 ]

.442[ 11.2 ]

.394[ 10 ]

.304[ 7.7 ]

.593[ 15.1 ]

.512[ 13 ]

1.770 [ 45 ]

.256[ 6.5 ]

R .098[ R 2.5 ]

.512[ 13 ]

R .138[ R 3.5 ]

44100

1.811[ 46 ]

.787[ 20 ]

.530[ 13.5 ]

.236[ 6 ]

.206[ 5.2 ]

.593[ 15.1 ]

.512[ 13 ]

1.760 [ 44.7 ]

.256[ 6.5 ]

R .059[ R 1.5 ]

.512[ 13 ]

R .157[ R 4 ]

44101

1.811[ 46 ]

.866[ 22 ]

.580[ 14.7 ]

.394[ 10 ]

.304[ 7.7 ]

.593[ 15.1 ]

.512[ 13 ]

1.908 [ 48.5 ]

.256[ 6.5 ]

R .098[ R 2.5 ]

.512[ 13 ]

R .177[ R 4.5 ]

44102

1.811[ 46 ]

.984[ 25 ]

.658[ 16.7 ]

.472[ 12 ]

.354[ 9 ]

.593[ 15.1 ]

.512[ 13 ]

2.035 [ 51.7 ]

.256[ 6.5 ]

[ R 3 ]

.512[ 13 ]

R .216[ R 5.5 ]

44103

R .118

Note: v-opening modifications and die relief available at an additional cost. Contact application sales desk for pricing and lead times. Nitrex standard on all Quick Change 2v dies provides HRC-70.




LocalTel: 651-286-6001Fax: 651-286-5959

44100

44102

44101

44103

CAT. No. V2INCHES [mm]

44100441014410244103

.630 [16.0]

.787 [20.0]

.866 [22.0]

.984 [25.0]

.394 [10.0]

.236 [6.0]

.394 [10.0]

.472 [12.0]

ANGLE

MAX. TONFT / METER(LT, ST & XT)

V1INCHES [mm]

75˚75˚ 75˚ 75˚

ST16.34”

(415mm)

LT32.87”

(835mm)

XT 32.87"

(835mm)

30 / 10030 / 10030 / 10030 / 100

39 Quick chanGe 88˚ & 90˚ 2V dieS


R .016[ R 0.4 ]

1.358[ 34.5 ]

.593[ 15.05 ].256

[ 6.5 ]

.512[ 13 ]

.512[ 13 ]

1.811[ 46 ]

.276[ 7 ]

.158[ 4 ]

.138[ 3.5 ]

.197[ 5 ]

( 4 )

.256[ 6.5 ]

1.811[ 46 ] .512

[ 13 ].512[ 13 ]

R. 016[ R 0.4 ]

R .024[ R 0.6 ]

1.457[ 37 ]

.593[ 15.05 ]

.394[ 10 ]

.236[ 6 ]

.177[ 4.5 ]

.256[ 6.5 ]

( 2 ) ( 2 )

1.811[ 46 ]

R .031[ R 0.8 ]

.512[ 13 ]

.256[ 6.5 ]

1.536[ 39 ]

.295[ 7.5 ]

.472[ 12 ]

.315[ 8 ]

.217[ 5.5 ]

.512[ 13 ]

.593[ 15.05 ]

R .019[ R 0.5 ]

( 2 ) ( 2 ) 1.811[ 46 ]

R .019[ R 0.5 ]

.512[ 13 ]

1.772[ 45 ]

.709[ 18 ]

.413[ 10.5 ]

.335[ 8.5 ]

.551[ 14 ]

.593[ 15.05 ]

.256[ 6.5 ]

.512[ 13 ]

( 4 )




LocalTel: 651-286-6001Fax: 651-286-5959


420004200842001420024200942003

.276 [7.0]

.276 [7.0] .394 [10.0] .472 [12.0] .472 [12.0] .709 [18.0]

.158 [4.0]

.158 [4.0]

.236 [6.0]

.315 [8.0]

.315 [8.0]

.551 [14.0]

ANGLE


V1INCHES [mm]

90˚88˚ 90˚ 90˚88˚90˚

ST16.34”

(415mm)

LT32.87”

(835mm)

XT 32.87"

(835mm)

18 / 6018 / 6021 / 7024 / 8024 / 8030 / 100

42001

42003

42008, 42000 88˚ 90˚

42009, 42002 88˚ 90˚

40Quick chanGe 88˚ 2V dieS

1.811[ 46 ]

.512[ 13 ]

.512[ 13 ]

1.772[ 45 ]

.413[ 10.5 ]

.709[ 18 ]

.551[ 14 ]

.335[ 8.5 ]

.256[ 6.5 ]

R .019[ R 0.5 ]

.593[ 15.05 ]

( 4 ) 1.811

.512[ 13 ]

.512[ 13 ]

1.792[ 45.5 ]

.593[ 15.05 ]

.787[ 20 ]

.472[ 12 ]

.295[7.5]

.472[ 12 ]

[ 46 ]

R .019[ R 0.5 ]

( 4 )

.256[ 6.5 ]

1.811[ 46 ]

.256[ 6.5 ]

R .031[ R 0.8 ]

.512[ 13 ]

1.969[ 50 ]

.593[ 15.05 ]

.571[ 14.5 ]

.984[ 25 ]

.630[ 16 ]

.374[ 9.5 ]

( 4 )

.512[ 13 ]

.256[ 6.5 ]

.394[ 10 ]

.236[ 6 ]

.177[ 4.5 ]

1.811[ 46 ]

R .024[ R 0.6 ]

.512[ 13 ]

.256[ 6.5 ]

1.457[ 37 ]

.512[ 13 ]

.593[ 15.1 ]

R .016[ R 0.4 ]

42007





LocalTel: 651-286-6001Fax: 651-286-5959

42004

42006

42005

42007


42004420054200642007

.709 [18.0]

.787 [20.0]

.984 [25.0]

.394 [10.0]

.551 [14.0]

.472 [12.0]

.630 [16.0].236 [6.0]

ANGLE


V1INCHES [mm]

88˚88˚ 88˚ 88˚

ST16.34”

(415mm)

LT32.87”

(835mm)

XT 32.87"

(835mm)

30 / 10030 / 10021 / 7021 / 70

41Quick chanGe 2V dieS

WIth Large ShouLder radII

acute-anGle Quick chanGe 2V dieS

1.811[ 46 ]

( 2 )

R .059[ R 1.5 ]

.256[ 6.5 ] 1.575

[ 40 ]

.593[ 15.05 ]

.315[ 8 ]

.394[ 10 ]

.236[ 6 ]

R .098[ R 2.5 ]

.512[ 13 ]

.236[ 6 ]

.512[ 13 ]

( 2 )

1.969[ 50 ]

.512[ 13 ]

.512[ 13 ]

.593[ 15.05 ]

1.969[ 50 ]

R .039[ R 1 ]

.591[ 15 ]

.394[ 10 ]

.236[ 6 ]

.354[ 9 ]

( 4 )

.256[ 6.5 ]

1.969[ 50 ]

( 4 )

.472[ 12 ]

.709[ 18 ]

.315[ 8 ]

.571[ 14.5 ]

R .039[ R 1 ]

.593[ 15.05 ]

.512[ 13 ]

2.303 [ 58.5 ]

.256[ 6.5 ]

.512[ 13 ]

1.811[ 46 ]

( 2 )

.256[ 6.5 ]

1.969[ 50 ]

.512[ 13 ]

.551[ 14 ]

.787[ 20 ]

.472[ 12 ]

.394[ 10 ]

R .118[ R 3 ]

R .158[ R 4 ]

.512[ 13 ]

( 2 )

[ 15.05 ].593

1.811[ 46 ]

.394[ 10 ]

.315[ 8 ]

.236[ 6 ]

.236[ 6 ]

.593[ 15.1 ]

.512[ 13 ]

1.575 [ 40 ]

.256[ 6.5 ]

R .059[ R 1.5 ]

.512[ 13 ]

R .098[ R 2.5 ]

42012





LocalTel: 651-286-6001Fax: 651-286-5959


420104201242011

.394 [10.0]

.394 [10.0]

.787 [20.0]

.236 [6.0]

.236 [6.0].472 [12.0]

ANGLE


V1INCHES [mm]

90˚88˚ 88˚

ST16.34”

(415mm)

LT32.87”

(835mm)

XT 32.87"

(835mm)

24 / 80 24 / 80 30 / 100

42010

42020

42012

42021

42011


4202042021

.394 [10.0]

.472 [12.0].236 [6.0].315 [8.0]

ANGLE


V1INCHES [mm]

30˚ 30˚

ST16.34”

(415mm)

LT32.87”

(835mm)

XT 32.87"

(835mm)

9 / 309 / 30


42Bolt doWn 2V dieS (old Style)

Note: All mounting hardware is included. v-opening modifications and die relief available

at an additional cost. Contact application sales desk for pricing and lead times.

Nitrex standard on all 2v dies provides HRC-70.

1.024[ 26 ]

( 4 )

R .016[ R 0.4]

1.969[ 50 ]

.138[ 3.5 ]

.197[ 5 ]

.276[ 7 ]

.158[ 4 ]

1.024[ 26 ]

( 2 )( 2 )

R .016[ R 0.4 ]

R .024 [ R 0.6 ]

.256[ 6.5 ]

.394[ 10 ]

.236[ 6 ]

.177[ 4.5 ]

1.969[ 50 ]

1.024[ 26 ]

1.969[ 50 ]

R .031[ R 0.8 ]

R .020 [ R 0.5 ]

.217[ 5.5 ]

.295[ 7.5 ]

.472[ 12 ]

.315[ 8 ]

( 2 ) ( 2 )

1.024[ 26 ]

1.969[ 50 ]

R .020[ R 0.5 ]

.413[ 10.5 ]

.709[ 18 ]

.551[ 14 ]

.335[ 8.5 ]

( 4 )

1.969[ 50 ]

R .020[ R 0.5 ]

.709[ 18 ]

.413[ 10.5 ]

.551[ 14 ]

.335[ 8.5 ]

1.024[ 26 ]

( 4 )

1.024[ 26 ]

R .031[ R 0.8 ]

1.969[ 50 ]

.374[ 9.5 ]

.630[ 16 ]

.984[ 25 ]

.571[ 14.5 ]

( 4 )1.024[ 26 ]

( 4 )

R .020[ R 0.5 ]

1.969[ 50 ]

.472[ 12 ]

.787[ 20 ]

.472[ 12 ]

.295[ 7.5 ]




LocalTel: 651-286-6001Fax: 651-286-5959

42030

42032 42034

42036

42031

42033

42035


42030420314203242033420344203542036

.276 [7.0] .394 [10.0] .472 [12.0] .709 [18.0] .709 [18.0] .787 [20.0] .984 [25.0]

.158 [4.0]

.236 [6.0]

.315 [8.0]

.551 [14.0]

.551 [14.0]

.472 [12.0]

.630 [16.0]

AANGLE

MAX. TONFT / METER

(LT & ST)V1

INCHES [mm]

90˚90˚ 90˚ 90˚ 88˚ 88˚ 88˚

ST16.34”

(415mm)

LT32.87”

(835mm)

18 / 6021 / 7024 / 8030 / 10030 / 10030 / 10021 / 70

432V dieS With larGe Shoulder radii

(old Style)

SectionaliZed 2V dieS (old Style)

1.024[ 26 ]

R .059[ R 1.5 ]

2.165[ 55 ]

R .098[ R 2.5 ]

( 2 ) ( 2 )

.394[ 10 ]

.236[ 6 ]

.236[ 6 ]

.394[ 10 ]

2.165[ 55 ]

R .157[ R 4 ]

.591[ 15 ]

.787[ 20 ]

.472[ 12 ]

.394[ 10 ]

R .118[ R 3 ][ 26 ]

1.024

( 2 )( 2 )

1.811[ 46 ]

R .016 [ R 0.4 ]

.276[ 7 ]

.197[ 5 ]

.138[ 3.5 ]

.158[ 4 ]

.256[ 6.5 ] 1.969

[ 50 ]

.593[ 15.05 ]

( 4 )1.811[ 46 ]

( 2 ) ( 2 )

.256[ 6.5 ]

R .016[ R 0.4 ]

R .023[ R 0.6 ]

.394[ 10 ]

.256[ 6.5 ]

.177[ 4.5 ]

.236[ 6 ]

.593[ 15.05 ]

1.969[ 50 ]

Note: v-opening modifications and die relief available at an additional cost. Contact application sales desk for pricing and lead times. Nitrex standard on all 2v dies provides HRC-70.




LocalTel: 651-286-6001Fax: 651-286-5959


42040 42041

.276 [7.0] .394 [10.0]

.158 [4.0]

.236 [6.0]

AANGLE

MAX. TONFT / METER

(LT & ST)V1

INCHES [mm]

90˚88˚

ST16.34”

(415mm)

LT32.87”

(835mm)

24 / 8030 / 100


4205042051

.276 [7.0] .394 [10.0]

.158 [4.0]

.236 [6.0]

AANGLE

MAX. TONFT / METER

(XT)V1

INCHES [mm]

90˚90˚

XT32.87"

(835mm)

18 / 6021 / 70

42040

42050

42041

42051

44SectionaliZed 2V dieS (old Style)

Note: v-opening modifications and die relief available at an additional cost. Contact application sales desk for pricing and lead times.

Nitrex standard on all 2v dies provides HRC-70.

1.811[ 46 ]

.256[ 6.5 ]

R .020[ R 0.5 ]

R .031[ R 0.8 ]

.593[ 15.05 ]

1.969[ 50 ]

.295[ 7.5 ]

.217[ 5.5 ]

.472[ 12 ]

.315[ 8 ]

( 2 ) ( 2 ) 1.811[ 46 ]

.256[ 6.5 ]

.593[ 15.05 ]

1.969[ 50 ]

.551[ 14 ]

.335[ 8.5 ]

.413[ 10.5 ]

.709[ 18 ]

R .020[ R 0.5 ]

( 4 )

1.811[ 46 ]

R .020[ R 0.5 ]

.593[ 15.05 ]

1.969[ 50 ]

.295[ 7.5 ]

.472[ 12 ]

.787[ 20 ]

.472[ 12 ]

( 4 )

.256[ 6.5 ]

1.811[ 46 ]

R .031[ R 0.8 ]

.984[ 25 ]

.630[ 16 ]

.256[ 6.5 ]

1.969[ 50 ]

.593[ 15.05 ]

.374[ 9.5 ]

.571[ 14.5 ]

( 4 )




LocalTel: 651-286-6001Fax: 651-286-5959

42052

42056

42054 / 42053 880 900

42055


42052 42053420544205542056

.472 [12.0]

.709 [18.0]

.709 [18.0]

.787 [20.0]

.984 [25.0]

.315 [8.0]

.551 [14.0]

.551 [14.0]

.472 [12.0]

.630 [16.0]

AANGLE

MAX. TONFT / METER

(XT)V1

INCHES [mm]

90˚90˚ 88˚ 88˚ 88˚

XT32.87"

(835mm)

21 / 7030 / 10030 / 10030 / 10030 / 100

45SectionaliZed 2V dieS With larGe

Shoulder radii (old Style)

loW Profile SectionaliZed 2V dieS (old Style)

1.969[ 50 ]

R .023[ R 0.6 ]

.177[ 4.5 ]

.256[ 6.5 ]

.394[ 10 ]

.236[ 6 ]

R .016[ R 0.4 ]

1.969[50]

1.969[50]

.630[ 16 ]

1.969[50]

.593[ 15.05 ]

( 2 )( 2 )

.256[ 6.5 ]

.236[ 6 ]

R .059[ R 1.5 ]

(2)

.236[ 6 ]

R .098[ R 2.5 ]

(2)

.394[ 10 ]

.394[ 10 ]

1.811[ 46 ]

.256[ 65 ]

.593[ 15.05 ]

2.165[ 55 ] 2.165

[ 55 ]

.593[ 15.05 ]

R .157[ R 4 ]

.591[ 15 ]

.787[ 20 ]

.472[ 12 ]

.394[ 10 ]

1.811[ 46 ]

R .118[ R 3 ]

( 2 )( 2 )

.256[ 6.5 ]

.630[ 16 ]

R .019[ R 0.5 ]

.256[ 6.5 ]

R .031[ R 0.8 ]

.295[ 7.5 ]

.472[ 12 ]

.315[ 8 ]

1.969[ 50 ]

.593[ 15.05 ]

( 2 )( 2 )

.217[ 5.5 ]

Note: v-opening modifications and die relief available at an additional cost. Contact application sales desk for pricing and lead times. Nitrex standard on all 2v dies provides HRC-70.




LocalTel: 651-286-6001Fax: 651-286-5959

42070

42061

42071

42062


4207042071

.394 [10.0]

.787 [20.0].236 [6.0] .472 [12.0]

AANGLE

MAX. TONFT / METER

(XT)V1

INCHES [mm]

90˚88˚

XT32.87"

(835mm)

24 / 8030 / 100


4206142062

.394 [10.0]

.472 [12.0].236 [6.0] .315 [8.0]

AANGLE

MAX. TONFT / METER

(XT)V1

INCHES [mm]

90˚90˚

XT32.87"

(835mm)

21 / 7021 / 70

END VIEW

.591[ 15 ]

.591[ 15 ]

1.969[ 50 ].394

[ 10 ]

FRONT VIEW

462V die rail and clamP

StacKIng raILS

american to euroPean Quick chanGe 2V die

“H”

2.362[60]

.591[ 15 ]

["X"]

.592

1.969[ 50 ]

[15 ].276[ 7 ]

END VIEW

.591[ 15 ]

.591[ 15 ]

1.969[ 50 ].394

[ 10 ]

FRONT VIEWEND VIEW

.591[ 15 ]

.591[ 15 ]

1.969[ 50 ].394

[ 10 ]

FRONT VIEW

.500

“H”

2.362[60]

07.21005.

78.51 .625

60 2.362

31215.

07.21005.

78.51 .625

60 2.362

31215.

2V die holderS




LocalTel: 651-286-6001Fax: 651-286-5959

CAT. No.

4355332.87” (835mm) 16.34” (415mm)

CATALOGNUMBER

420914209242093

HEIGHTRANGE

X= .575 - 1.250X=1.251 - 2.000X=2.001 - 2.750

X32.87" (835mm)

L32.87” (835mm)

S16.34” (415mm)

CCAT. No.

53090

Max Ton/ftL & S

30

L32.87” (835mm)

S16.34” (415mm)

CAT. No.H

HEIGHT INCHES [mm]

L 32.87" (835mm)

S 16.34" (415mm)

43021 AT 1.536 [39mm]43022 AT 1.772 [45mm]43023 AT 2.953 [75mm]

CAT. No.H

HEIGHT INCHES [mm]

L 32.87" (835mm)

S 16.34" (415mm)

43021 1.536 [39mm]43022 1.772 [45mm]43023 2.953 [75mm]

CAT. No.L

32.87" (835mm)S

16.34" (415mm)

42089 [28-32 HRc]42090 [48-54 HRc]

47 Quick chanGe 88˚ & 90˚ 1V dieS

Note: Quick Change 1v Dies require die holder #43030 or #43530. v-opening modifications and die relief available at an additional cost. Contact application sales desk for pricing and lead times.Nitrex standard on all Quick Change 1v dies provides HRC-70.

3.288[ 83.5 ]

( 2 )

.551[ 14 ]

R .059[ R 1.5 ]

.236[ 6 ]

.551[ 14 ]

R .059[ R 1.5 ]

( 2 )

.315[ 8 ]

3.288[ 83.5 ]

.669[ 17 ]

R .098[ R 2.5 ]

.472[ 12 ]

3.288[ 83.5 ]

( 2 )

.551[ 14 ]

3.288[ 83.5 ]

( 2 )

R .098[ R 2.5 ]

.669[ 17 ]

.551[ 14 ]

.472[ 12 ]

3.288[ 83.5 ]

.709[ 18 ]

R .098[ R 2.5 ]

( 2 )

.551[ 14 ]

.551[ 14 ]

3.288[ 83.5 ]

R .078[ R 2 ]

.551[ 14 ]

.394[ 10 ]

( 2 )

Note: Low Profile Quick Change 1v Dies require die holder #43030 or 43530. Nitrex standard on all Quick Change 1v dies provides HRC-70.

1.181[ 30 ]

R .059[ R 1.5 ]

.236[ 6 ]

.551[ 14 ]

( 2 )

1.181[ 30 ]

R .059[ R 1.5 ]

.551[ 14 ]

.315[ 8 ]

( 2 )

.551[ 14 ]

R .078[ R 2 ]

1.181[ 30 ]

.394[ 10 ]

( 2 )

.551[ 14 ]

.669[ 17 ]

[ R 2.5 ] R .098

.472[ 12 ]

1.181[ 30 ]

( 2 )




LocalTel: 651-286-6001Fax: 651-286-5959

42120, 42100880 900

42103900

42121, 42101880 900

42104880

42122, 42102880 900

42110 4211242111 42114

42105880

CAT. No.LT

32.87” (835mm)

4210042120 4210142121 421024212242103 4210442105

.236 [6.0]

.236 [6.0]

.315 [8.0]

.315 [8.0]

.394 [10.0]

.394 [10.0]

.472 [12.0]

.472 [12.0]

.551 [14.0]

AANGLE


V1INCHES [mm]

90˚ 88˚ 90˚ 88˚ 90˚ 88˚ 90˚ 88˚ 88˚

XT32.87"

(835mm)30 / 10030 / 10030 / 10030 / 100 30 / 100 30 / 10030 / 10030 / 10030 / 100

ST16.34”

(415mm)

CAT. No.

42110421114211242114

AANGLE

90° 90° 90° 88°

MAX. TONFT / METER

V1INCHES [mm]

30 / 100 30 / 100 30 / 100 30 / 100

.236 [6.0]

.315 [8.0].394 [10.0].472 [12.0]

Call for priceand lead time.

loW Profile Quick chanGe 88˚ & 90˚ 1V dieS

48




LocalTel: 651-286-6001Fax: 651-286-5959

42200

3.288[ 83.5 ]

.551[ 14 ]

.630[ 16 ]

R .118[ R 3 ]

(2)

.236[ 6 ]

3.288[ 83.5 ]

.551[ 14 ]

.748[ 19 ]

R .118[ R 3 ]

(2)

.315[ 8 ]

42201

.394[ 10 ]

.551[ 14 ]

3.288[ 83.5 ]

42202

.945[ 24 ]

R .118[ R 3 ]

(2)

42203

3.288[ 83.5 ]

.551[ 14 ]

1.102[ 28 ]

R .197 [ R 5 ]

(2)

.472[ 12 ]

3.288[ 83.5 ]

.551[ 14 ]

1.260[ 32 ]

R .197[ R 5 ]

(2)

.551[ 14 ]

42204 42205

3.288[ 83.5 ]

R .197[ R 5 ]

(2)

1.417[ 36 ]

.551[ 14 ]

.630[ 16 ]


42200

42203

42201

42204

42202

42205

CAT. No.LT

32.87” (835mm)

42200 4220142202 422034220442205

AANGLE


V1INCHES [mm]

30˚30˚ 30˚ 30˚ 30˚ 30˚

ST16.34”

(415mm)

22 / 76 27 / 90 30 / 100 30 / 100 30 / 100 30 / 100

XT32.87"

(835mm).236 [6.0].315 [8.0] .394 [10.0] .472 [12.0] .551 [14.0].630 [16.0]

30˚ acute-anGle Quick chanGe 1V dieS

Quick chanGe 75° 1V dieS

3.288[ 83.5 ]

R .016

.551[ 14 ]

.118[ 3 ]

[ R 4 ]

44200

3.288[ 83.5 ]

R .059

.551[ 14 ]

.236[ 6 ]

[ R 1.5 ]

44201

3.288[ 83.5 ]

R .098

.669[ 17 ]

.394[ 10 ]

[ R 2.5 ]

.551[ 14 ]

44202

3.288[ 83.5 ]

R .118

.748[ 19 ]

.472[ 12 ]

[ R 3 ]

.551[ 14 ]

44203

3.288[ 83.5 ]

R .138

.945[ 24 ]

.630[ 16 ]

[ R 3.5 ]

.551[ 14 ]

44204

[ 28 ]

[ R 4 ]

1.102

R .157

.787[ 20 ]

.551[ 14 ]

[ 83.5 ]3.288

44205

[ 32 ]

[ R 4.5 ]

1.260

R .177

.866[ 22 ]

.551[ 14 ]

[ 83.5 ]3.288

44206

[ 36 ]

[ R 5.5 ]

1.417

R .216

.984[ 25�]

.551[ 14 ]

[ 83.5 ]3.288

44207


49




LocalTel: 651-286-6001Fax: 651-286-5959

44200

44204 44206

44202

44201

44205 44207

44203

CAT. No.LT

32.87” (835mm)

44200442014420244203 44204442054420644207

.118 [3.0]

.236 [6.0]

.394 [10.0]

.472 [12.0]

.630 [16.0]

.787 [20.0]

.866 [22.0]

.984 [25.0]

AANGLE


V1INCHES [mm]

75° 75° 75° 75° 75° 75° 75° 75°

ST16.34”

(415mm)

30 / 100 30 / 100 30 / 100 30 / 100 30 / 100 30 / 100 30 / 100 30 / 100

XT32.87"

(835mm)

50




LocalTel: 651-286-6001Fax: 651-286-5959

2.362 [ 60 ]

.866 [ 22 ]

.555 [ 14.1 ]

1.181 [ 30 ]

1.102 [ 28 ]

1.181[ 30 ]

.555[ 14.1 ]

.866[ 22 ]

2.362[ 60 ]

1.102[ 28 ]

SIDE VIEW

TOP VIEW

Note: Available with die tang. Contact application sales desk for pricing and lead times.

1.181[ 30 ]

.555[ 14.1 ]

.866[ 22 ]

2.362[ 60 ]

1.102[ 28 ]

SIDE VIEW

TOP VIEW

CAT. No.

43559PRICE

CAT. No.

43030

L32.87” (835mm)

S16.34” (415mm)

CAT. No.

43530

LT32.87” (835mm)

ST16.34” (415mm)

Quick chanGe 1V die holder and Wedge BLocK

Note: Available with die tang. Contact application sales desk for pricing and lead times.

acute-anGle 30° & 45° larGe 1V dieS51

2.362[ 60 ]

R .118[ R 3 ]

2.362[ 60 ]

( 2 )

.709[ 18 ]

2.362[ 60 ]

.984[ 25 ]

2.559[ 65 ]

R .157[ R 4 ]

(2)

1.260[ 32 ]

R .196[ R 5 ]

2.362[ 60 ]

2.362[ 60 ]

( 2 )

2.362[ 60 ]

1.575[ 40 ]

R .196[ R 5 ]

3.150[ 80 ]

3.150[ 80 ]

( 2 )

R .236[ R 6 ]

1.969[ 50 ]

2.362[ 60 ]

3.740[ 95 ]

3.740[ 95 ]

( 2 )

Note: Acute-Angle Large 1v Dies may require die holder #43040. Check height against machine stroke prior to ordering. v-opening modifications and die relief available at an

additional cost. Contact application sales desk for pricing and lead times.

Nitrex standard on all large 1v dies provides HRC-70.




LocalTel: 651-286-6001Fax: 651-286-5959

42300

42302

42304

42301

42303

CAT. No.LT

32.87” (835mm)

4230042301423024230342304

.709 [18.0]

.984 [25.0] 1.260 [32.0]1.575 [40.0]1.969 [50.0]

AANGLE

MAX. TONFT / METER

(LT & ST)V1

INCHES [mm]

30°30° 45°45°45°

ST16.34”

(415mm)

24 / 80 18 / 6012 / 40 21 / 7021 / 70

30° 30°

45°

45°

45°

52




LocalTel: 651-286-6001Fax: 651-286-5959

2.362[ 60 ]

1.260[ 32 ]

2.362[ 60 ]

R .157[ R 4 ]

( 2 )

2.362[ 60 ]

1.575[ 40 ]

2.362[ 60 ]

R .157[ R 4 ]( 2 )

2.362[ 60 ]

1.968[ 50 ]

R .157[ R 4 ]

2.362[ 60 ]

( 2 )

3.150[ 80 ]

2.362[ 60 ]

2.953[ 75 ]

R .196[ R 5 ]

2.480[ 63 ]

( 2 )

Note: Large 1v Dies may require die holder #43040. Check height against machine stroke prior to ordering. v-opening modifications and die relief available at an additional cost. Contact application sales desk for pricing and lead times. Nitrex standard on all large 1v dies provides HRC-70.

CAT. No.LT

32.87” (835mm)

42400424014240242403

1.260 [32.0]1.575 [40.0] 1.968 [50.0]2.480 [63.0]

AANGLE

MAX. TONFT / METER

(LT & ST)V1

INCHES [mm]

85°85°85°85°

ST16.34”

(415mm)

30 / 10030 / 10030 / 10030 / 100

42400

42402

42401

42403

larGe 85° 1V dieS

larGe 85° 1V dieS53

Note: Large 1v Dies may require die holder #43040. Check height against machine stroke prior to ordering.v-opening modifications and die relief available at an additional cost.

Contact application sales desk for pricing and lead times.


3.740[ 95 ]

2.362[ 60 ]

3.150[ 80 ]

3.740[ 95 ]

R .236[ R 6 ]

( 2 )

R .275[ R 7 ]

4.331[ 110 ]

2.362[ 60 ]

4.724[ 120 ]

3.937[ 100 ]

( 2 )




LocalTel: 651-286-6001Fax: 651-286-5959

42404

42405

CAT. No.LT

32.87” (835mm)

4240442405

3.150 [80.0]3.937 [100.0]

AANGLE

MAX. TONFT / METER

(LT & ST)V1

INCHES [mm]

85°85°

ST16.34”

(415mm)

30 / 10030 / 100

54




LocalTel: 651-286-6001Fax: 651-286-5959

Note: Large 1v Dies may require die holder #43040. Check height against machine stroke prior to ordering.

Please check width of lower beam of press brake prior to ordering die #42406.

v-opening modifications and die relief available at an additional cost. Contact application sales desk for pricing and lead times.


1.969[ 50 ]

2.362[ 60 ]

6.063[ 154 ]

3.543[ 90 ]

4.921[ 125 ]

[ 123 ] 4.843

R .354[ R 9 ]( 2 )

larGe 1V die holderCAT. No.

43040

L32.87” (835mm)

S16.34” (415mm)

CAT. No.ST

16.34” (415mm)

42406 4.921 [80.0]

AANGLE

MAX. TONFT / METER

(LT & ST)V1

INCHES [mm]

80° 30 / 100

1.969[50]

850

880

1.378[35]

2.362[60]

2.362[60]

.630[16]

.867[22]

eXacta 4 Way die

Cat.No. V Opening Angle Max TonFt/Meter

32.87" L[835mm]

32.87" X[835mm]

42340

V1 .630" [16] 88

30/100V2 1.378" [35] 85

V3 .867" [22] 88

V4 1.969" [50] 85

larGe 80° 1V die

Note: Exacta 4 Way Die is hardened, but does not have Nitrex surface enhancement.

55

Note: *Dimensions are for shut height. †Offset height may vary as much as +- .020" (0.5mm) after bending. All angles will be obtuse. Special offset sizes are available at additional cost. Nitrex (HRC-70) standard on all dies. Quick change offset tools are available at additional cost.

Part No. 43104

.375[ 9.52 ]

3.524[ 89.51 ]

†

*

3.569[ 90.65 ]

.312[ 7.9 ]

Part No. 43103

†

*

3.480[ 88.39 ]

.438[ 11.1 ]

Part No. 43105

†

*

3.701[ 94 ]

.125[ 3.18 ]

PART NO.43100

†

*


EXTRA PARTS

5.118[ 130 ]

3.657[ 92.88 ]

.188[ 4.8 ]

PART NO. 43101

†

*

.250[ 6.4 ]

3.612[ 91.76 ]

PART NO. 43102

†

*

3.436[ 87.27 ]

.500[ 12.7 ]

Part No. 43106

*

†




LocalTel: 651-286-6001Fax: 651-286-5959

raIL StyLe offSet tooLS

CAT. No.LT

32.87” (835mm)

43100 4310143102 4310343104 43105 43106

.125 [3.18]

.188 [4.8]

.250 [6.4]

.312 [7.9]

.375 [9.52]

.438 [11.1]

.500 [12.7]


MAX.MATERIAL

OFFSET DIM. INCHES [mm]

30 / 100 30 / 100 30 / 100 30 / 100 30 / 100 30 / 100 30 / 100

ST16.34”

(415mm)

18 GA. CRS 18 GA. CRS 18 GA. CRS 18 GA. CRS 16 GA. CRS 16 GA. CRS 16 GA. CRS

XT32.87"

(835mm)

43100 4310343101

43104

43102

43105 43106

EFFECTIVE V

.177" .266".354".441".530".619".707"

56




LocalTel: 651-286-6001Fax: 651-286-5959

quIcK change raIL StyLe fLattenIng dIe

30˚ 3V hemminG die

fLattenIng dIe

3.780[ 96 ]

2.362[ 60 ]

4.110[ 104.4 ]

3.110[ 79 ]

2.362[ 60 ]

.394[ 10 ]

R .039[ R 1 ]

.236[ 6 ]

.472[ 12 ]

R .039[ R 1 ]

2.362[ 60 ]

R .039[R 1]( 2 ) ( 2 )

( 2 )

1.969[ 50 ]

.593[ 15.05 ]

1.969[ 50.0 ]

.570[ 14.5 ]

Nitrex standard on all dies provides HRC-70.

Note: Designed to run with standard 2v Quick Change die system. Custom heights available for stage bending. Contact application sales desk for pricing and lead times. Nitrex standard on all Quick Change dies provides HRC-70.

Nitrex standard on all dies provides HRC-70.

CAT. No.

42312


30 / 100

XT32.87" (835mm)

ST16.34” (415mm)

LT32.87” (835mm)


42310 .276 [7.0].276 [7.0]

MAX. TONFT / METER

(LT & ST)V1

INCHES [mm]V2

INCHES [mm]

30 / 100 .158 [4.0]

ST16.34” (415mm)

LT32.87” (835mm)

CAT. No.

42311

MAX. TONFT / METER

(L & S)

30 / 100

S16.34” (415mm)

L32.87” (835mm)

fLattenIng PuncheS57




LocalTel: 651-286-6001Fax: 651-286-5959

.906[ 23 ]

"H"

1.575[ 40 ]

WT-41523

1.101[ 27.97 ]

"H"

.551[ 14 ]

1.181[ 30 ] .472

[ 12 ]

WT-41630

1.101[ 27.97 ]

41523 41630

CAT. No.

4152341630

MAX. TONFT / METER

(LT & ST)

30 / 10030 / 100

ST16.34” (415mm)

LT32.87” (835mm)

HHEIGHT

INCHES [mm]

2.559 [65.0]3.307 [84.0]

58




LocalTel: 651-286-6001Fax: 651-286-5959

rePlacement V-BlockS for WilSon hemminG dieS

.236[ 6 ]

.039[ 1 ]

.630[ 16 ]

.551[ 14 ]

.906[ 23 ]

Part No.43522

.315[ 8 ]

.630[ 16 ]

.551[ 14 ]

.906[ 23 ]

.039[ 1 ]

.394[ 10 ]

.630[ 16 ]

.866[ 22 ] 1.220

[ 31 ]

.039[ 1 ]

1.181[ 30 ]

.394[ 10 ]

1.720[ 43.7 ]

.118[ 3 ]

Note: Nitrex (HRC-70) standard on all dies.

H

2.362

[ 60 ]

43522

43524

43523

43528


43522435234352443528

.236 [6.0]

.315 [8.0].394 [10.0] .394 [10.0]

20 GA. CRS16 GA. CRS14 GA. CRS 14 GA. CRS

MAX. TONFT / METER

(LT & ST)MAX.

MATERIAL

20 / 6720 / 6720 / 67 25 / 83

ST16.34” (415mm)

LT32.87” (835mm)

CAT. No.V1

INCHES [mm]

H HEIGHT INCHES

[mm]

MAX. TON FT / METER

(LT & ST)

MAX MATERIAL

LT 32.87"

(835mm)

ST 16.34"

(415mm)

42601 .236 [6.0] 4.587 [116.5] 20/67 20 GA. CRS

42602 .315 [8.0] 4.587 [116.5] 20/67 16 GA. CRS

42603 .394 [10.0] 4.902 [124.5] 20/67 14 GA. CRS

42608 .394 [10.0] 5.402 [137.2] 25/83 14 GA. CRS

hemmIng dIeS

2 StaGe hemminG Punch & die59




LocalTel: 651-286-6001Fax: 651-286-5959

.394[ 10 ]

4.094[ 104 ]

30˚

4.331[ 110 ]

2.362[ 60 ]

R.039[ 1 ]

2 Stage Hemming Punch & Die Assembled

CAT. No.

4190943595


30 / 100 30 / 100

XT32.87" (835mm)

ST16.34” (415mm)

LT32.87” (835mm)

41909

43595

Note: 16 ga. maximum material.Nitrex (HRC-70) standard on all dies.

60




LocalTel: 651-286-6001Fax: 651-286-5959

magnetIc SquarIng arm SIde gauge

quIcK change BacK gauge StoPPer PLate/PadS

*Note: Intended for use with Quick Change, 2v, Sectionalized 2v, and Quick Change 1v Dies.

Note: Quick Change Back Gauge Stopper Pads are for Amada Style Back Gauges.

Adjustable Back Gauge Stopper Plate

Single Point PadCAT. No. 42709

Reworkable PadCAT. No. 42712

Sheet Support Pad CAT. No. 42708

Replaces Original Pad CAT. No. 42707

CAT. No.

42750L (left) 42750R (right)

PRICE

CAT. No.

42701

PRICE

CATALOGNUMBER

42703PRICE

CAT. No. PRICE

42707 427084270942712

DESCRIPTION

Replaces Original Pad Sheet Support Pad Single Point Pad Reworkable Pad

61 urethane holderS & PadS

1.693[ 43 ]

2.362[ 60 ]

.984[ 25 ]

1.181[ 30 ]

3.268[ 83 ]

2.362[ 60 ]

4.724[ 120 ]

1.181[ 30 ]

3.150[ 80 ]

3.583

[ 60 ]

[ 91 ]

2.362

[ 100 ]3.937

1.969[ 50 ]

1.969[ 50 ]

5.906[ 150 ]

2.362[ 60 ]

4.252[ 108 ]

1.772[ 45 ]

4.331[ 110 ]

Note: All urethane die holders are machined from 6061-T6 aluminum. Urethane holders may require die holder #43040.

Check height against machine stroke prior to ordering.




LocalTel: 651-286-6001Fax: 651-286-5959

CAT. No. DESCRIPTIONSHORE

HARDNESS

L 32.87"

(835mm)

S 16.34"

(415mm)

42501 Urethane Holder N/A

42511 Urethane Pad 80A/Red42521 Urethane Pad 90A/Blue


HARDNESS

L 32.87"

(835mm)

S 16.34"

(415mm)




HARDNESSL 32.87" (835mm)

S 16.34" (415mm)





S 16.34" (415mm)



62




LocalTel: 651-286-6001Fax: 651-286-5959



S 16.34" (415mm)





S 16.34" (415mm)



urethane ProductS

CAT. No. ANGLE V1Opening

V2Opening

HHeight

WWidth

PRICEL

PRICES

42001u 900 .23" [6] .39" [10] 1.81" [46] 1.45" [37]42002u 900 .31" [8] .47" [12] 1.81" [46] 1.53" [39]42004u 880 .55" [14] .70" [18] 1.81" [46] 1.77 [45]42005u 880 .47" [12] .78" [20] 1.81" [46] 1.79" [45.5]42006u 880 .63" [16] .98" [25] 1.81" [46] 1.96" [50]42021u 300 .31" [8] .47" [12] 1.81" [46] 2.30" [58.5]

1.53[39]

1.81[46]

.31[8]

.47[12]

.51[13]

.47[12]

.78[20]

1.81[46]

1.79[45.5]

.51[13]

.51[13]

1.81[46]

2.30[58.5]

.31[8]

.47[12]

.23[6]

.39[10]

1.81[46]

1.45[37]

.51[13]

.51[13]

.51[13]

1.77[45]

1.81[46]

.55[14]

.70[18]

1.81[46]

1.96[50]

.63[16]

.98[25]

900 900

300

880

880 880

42001ue 42002ue 42004ue

42005ue 42006ue 42021ue

.39[10]

.31[8]

.47[12]

.55[14]

.70[18]

.47[12]

.63[16]

.78[20]

.98[25]

.31[8]

.47[12]

.51[13]

.51[13]

.51[13]

.51[13]

.51[13]

.51[13]

63 Z1 narroW Punch holderS

5.118[ 130 ]

1.969[ 50 ]

3.937[ 100 ]

.276[ 7 ]

Part No. 43000

5.118[ 130 ]

1.969[ 50 ]

3.937[ 100 ]

.276[ 7 ]

Part No. 43000

1.969[ 50 ]

5.906[ 150 ]

Part No. 43001

4.724[ 120 ]

.787[ 20 ]

1.969[ 50 ]

5.906[ 150 ]

Part No. 43001

4.724[ 120 ]

.787[ 20 ]

Z2 narroW Punch holderS




LocalTel: 651-286-6001Fax: 651-286-5959

CAT. No. PRICE MAX. TON

43001 30 T/FT

CAT. No. PRICE MAX. TON

43000 30 T/FT

64Z2 Style deeP Punch holder

9.842[ 250 ]

.787[ 20 ]

8.662[ 220 ]

Part No. 43002

Note: Punch holder #43002 is designed for Z2 style upper beams, but may be modified for a Z1 center by using kit #980079.





LocalTel: 651-286-6001Fax: 651-286-5959

CAT. No. MAX. TONFT/METER LENGTH PRICE

43002 15/50 5.906 [150mm]980079 Z1 Conversion kit 5.906 [150mm]

43002 Z2 Punch Holder

980079 Z1 Conversion Kit

65 StacKIng Punch hoLder

5.118[ 130 ]

3.937[ 100 ]

5.906[ 150 ]

Part No. 43003

.276[ 7 ]

EXISTING CLAMP PLATEPart #43531CLAMP PLATE

SPECIAL BOLT

Part No. 42720

EXISTING DISTANCE PIECEASSEMBLY (PUNCH HOLDER)

EXISTING SPRINGSPRING

CLAMP FRONT (CW)

CLAMP REAR (CCW)

SPECIAL LOCKING CAP

Part No. 42710

EXISTING SPRING

EXISTING CLAMP PLATE

EXISTING DISTANCE PIECEASSEMBLY (PUNCH HOLDER)

SPRING

Part #43519CLAMP PLATE

WITH SAFETY TONGUE

SPECIAL LOCKING CAP

SPECIAL BOLT

CLAMP FRONT (CW)

CLAMP REAR (CCW)

5.118[ 130 ]

3.937[ 100 ]

5.906[ 150 ]

Part No. 43003

.276[ 7 ]

duaL cLamPIng KItS

Part No. 42710 Part No. 42720




LocalTel: 651-286-6001Fax: 651-286-5959

42710, 43531 42720, 43519

CAT. No. MAX. TON PRICE

43003 30 T/FT

CAT. No. PRICE

42710427204351943531

66euroPean Punch hoLderS

5.906[ 150 ]

2.638[ 67 ]

1.575[ 40 ]

Part No. 43004


EXTRA PARTS

5.118[ 130 ]

5.906[ 150 ]

2.638[ 67 ]

1.575[ 40 ]

Part No. 43004


EXTRA PARTS

5.118[ 130 ]

euroPean dIe hoLder

1.536[ 39 ]

2.362[ 60 ]

*Note: Please verify press brake tongue slot width when ordering.

For Conventional Press Brakes without punch holder height adjustment.




LocalTel: 651-286-6001Fax: 651-286-5959

08.05000.2

06263.2

European to AmericanEuropean to American

CAT. No. Description

Max Ton/ft=

L & S

L 36"

S 18"

43590 European to American Punch Holder 40

American to EuropeanAmerican to European

CAT. No. Description

Max Ton/ft=

L & S

L 36"

S 18"

43006 American to European Die Holder 40

CAT. No. PRICE

43004

67 WILSon PreSS BraKe tooLIng caBInet




LocalTel: 651-286-6001Fax: 651-286-5959

90007 Cabinet Features: • Mobile base with heavy duty casters with a

rated capacity of 3600 pounds • Dies are separated by custom U-channels to

prevent damage to v-openings • Individual latches on all drawers • Full width handles with end caps and paper

labeling strips with clear protective label covers

urethane roLLS

Note: Urethane dies are also available for mark-free bending. Contact application sales desk for pricing and lead times.

meaSurinG deViceS

Urethane Rolls For Mark-Free Bending

CAT. No. PRICE

425304253142532

DIMENSIONS

.015 [0.4] x 6” [152] x 100'

.030 [0.8] x 6” [152] x 100'.022 [0.56] x 6” [152] x 100'

91007 Tip-up Punch Cabinet for European Style Press Brake Tooling Features: • Integrated locking easily activated with one hand • Handle and base extensions for casters

• Solid steel construction• Drawer capacity of 440lbs/drawer• Retainer top with rubber mat• Label protectors for each drawer• Lock in Mechanism• 2 swivel casters with total brake (2) fixed

casters• Safety interlock to prevent the opening of more

than one drawer at a time • Punches are held upright in custom steel

U-channels to prevent damage to tips and mounting tongues

974117 974118974119

Common Features

055 Avalanche Blue

051 Everest Blue

052 Classic Blue

057 Midnight Blue

102 Boreal Green

091 Black

041 Beige

061 Frost White

071 Light Gray

072 Charcoal Gray

208 Yellow

085 Sienna Orange

081 Flame Red

616 White

*Colors may differ slightly from those illustrated.

• Allow 15 days lead time for custom colors

CUSTOM COLOR OPTIONS

STOCKCAT. No.

Lead Time

(Days)Height Width Depth

Drawers IncludedPrice2"

[50mm]3"

[76mm]7"

[175mm]8"

[203mm]

90007 20 42" 40.25" 22.5" 2 N/A 3 N/A

91007 5-15 45.5" 42" 24" N/A 2 1 2

CAT. No. PRICE

974117974118974119974150980065

DESCRIPTION

Thickness GaugeCaliperCube

MagnetDigital Ruler Protractor Set

(includes 4", 8" 12")

TIR

V

MF

AIR

BEN

DIN

G F

OR

CE

CH

ART

M

ETR

IC

Soft

Bras

s....

......

......

......

......

......

...To

ns P

er M

eter

x 5

0%So

ft Al

umin

um...

......

......

......

......

...To

ns P

er M

eter

x 5

0%H

eat T

reat

ed A

lum

inum

Allo

ys...

..Ton

s Pe

r Met

er x

100

%St

ainl

ess

Stee

l.....

......

......

......

......

.Ton

s Pe

r Met

er x

150

%

STA

ND

AR

D F

OR

MU

LAS

FO

R S

ELE

CT

ING

A V

-OP

EN

ING

MAT

ER

IAL

TH

ICK

NE

SS

: 2.6

mm

OR

LES

S =

T x

6

3.00

mm

- 8.

0mm

= T

x 8

9.

00m

m -

12.0

0mm

= T

x 1

0

14.0

0mm

& T

HIC

kER

= T

x 1

2N

OTE

: The

ab

ove

form

ulas

are

for

ref

eren

ce o

nly.

For

mor

e sp

ecifi

c in

form

atio

n, p

leas

e re

fer

to t

he c

hart

bel

ow.

The

ben

din

g fo

rce

(tonn

age)

fig

ures

list

ed a

bov

e ar

e b

ased

on

mild

ste

el w

ith a

ten

sile

str

engt

h of

45-

50 k

ilogr

ams

per

sq

uare

m

illim

eter

. To

calc

ulat

e th

e ap

pro

xim

ate

ben

din

g fo

rce

(tonn

age)

req

uire

men

ts f

or o

ther

mat

eria

ls, p

leas

e us

e th

e m

ultip

liers

list

ed.

Not

e: *

Base

d on

ben

ding

to a

n in

clud

ed a

ngle

of 8

8 de

gree

s. T

his

dim

ensi

on w

ill in

crea

se w

hen

bend

ing

to a

n in

clud

ed a

ngle

of l

ess

than

88

degr

ees.

T =

MAT

ERIA

L TH

ICKN

ESS

• V =

V-O

PENI

NG •

MF

= M

INIM

UM F

LANG

E LE

NGTH

• IR

= IN

SIDE

RAD

IUS

V (m

m)

34

67

810

1214

1618

2022

2532

4050

6380

100

125

160

200

250

*MF

2.2

2.8

4.2

4.9

5.6

7.0

8.6

10.1

11.5

13.0

14.4

*15.

818

24.0

30.0

37.5

47.3

60.0

75.0

96.3

123.

215

4.0

192.

5

IR0.

50.

71.

01.

21.

31.

72.

02.

32.

73.

03.

33.

74.

25.

36.

78.

310

.513

.316

.720

.826

.733

.341

.7

TH

ICK

NE

SS

0.5m

m5.

24.

52.

8

0.6m

m6.

04.

23.

33.

2

0.8m

m8.

07.

25.

64.

4

1.0m

m11

.010

.09.

07.

05.

5

1.2m

m14

.013

.210

.88.

47.

56.

6

1.4m

m15

.414

.012

.69.

88.

87.

7

1.6m

m17

.616

.014

.411

.210

.08.

8

2.0m

mT

22.0

20.0

18.0

16.0

14.0

12.5

11.0

2.3m

mO

25.3

23.0

20.7

18.4

16.1

14.4

12.7

2.6m

mN

28.6

26.0

23.4

20.8

18.2

14.3

3.0m

mS

33.0

30.0

28.5

327

.021

.016

.5

3.2m

m35

.231

.928

.822

.417

.614

.4

3.5m

mP

38.5

35.0

28.0

21.9

15.8

14.0

4.0m

mE

44.0

36.0

28.0

22.0

18.0

4.5m

mR

45.0

36.0

28.1

20.3

5.0m

m55

.045

.035

.026

.322

.5

6.0m

mM

60.0

54.0

37.5

31.5

24.0

7.0m

mE

56.0

43.8

31.5

28.0

9.0m

mT

72.0

56.3

40.5

10.0

mm

E90

.070

.052

.545

.0

12.0

mm

R10

8.0

84.0

63.0

54.0

16.0

mm

144.

011

2.0

84.0

72.0

19.0

mm

152.

011

8.8

99.8

22.0

mm

176.

013

7.5

25.0

mm

225.

017

5.0

30.0

mm

270.

0

TIR

V

MF

AIR BEN

DIN

G FO

RC

E CH

ART IN

CH

Soft Brass.....................................Tons Per Meter x 50%

Soft Aluminum

..............................Tons Per Meter x 50%

Heat Treated Alum

inum Alloys.....Tons Per M

eter x 100%Stainless Steel..............................Tons Per M

eter x 150%

STA

ND

AR

D F

OR

MU

LAS

FO

R S

ELE

CT

ING

A V-O

PE

NIN

G

MAT

ER

IAL T

HIC

KN

ES

S: .105” O

R LESS = T x 6

.120” - .313” = T x 8

.375” - .500” = T x 10

.625” & TH

ICkER

= T x 12

MAT

ER

IAL T

HIC

KN

ES

S: .036” - .437” = T x 8

.500” & TH

ICkER

= T x 10N

OTE

: The above form

ulas are for reference only. For more sp

ecific information, p

lease refer to the chart below

.

The bend

ing force (tonnage) figures listed ab

ove are based

on mild

steel with a tensile strength of 45-50 kilogram

s per sq

uare m

illimeter. To calculate the ap

proxim

ate bend

ing force (tonnage) requirem

ents for other materials, p

lease use the multip

liers listed.

Note: * Based on bending to an included angle of 88 degrees. This dim

ension w

ill increase when bending to an included angle of less than 88 degrees.

T = MATERIAL THICKNESS • V = V-OPENING • M

F = MINIM

UM FLANGE LENGTH • IR = INSIDE RADIUS

V (m

m)

46

78

1012

1416

1820

2532

4050

6380

100125

160200

250

V (“)

0.1570.236

0.2760.315

0.3940.472

0.5510.630

0.7090.787

0.9841.260

1.5751.969

2.4803.150

3.9374.921

6.2997.874

9.843

*MF

0.1100.165

0.1930.220

0.2760.331

0.3970.454

0.5100.567

0.7090.945

1.1811.476

1.8602.362

2.9533.789

4.8506.063

7.579

IR0.026

0.0390.046

0.0520.066

0.0790.092

0.1050.118

0.1310.164

0.2100.262

0.3280.413

0.5250.656

0.8201.050

1.3121.640

GA

UG

ED

EC

.

200.036

5.43.6

3.02.5

2.01.7

180.048

T7.2

5.84.8

3.72.7

2.42.0

160.060

O7.8

6.05.0

4.23.5

3.12.7

140.075

N11.3

7.57.1

5.64.8

4.13.2

120.105

S15.8

13.010.5

9.57.5

5.64.0

110.120

16.113.1

10.17.2

5.03.8

100.135

P12.0

8.16.2

4.73.5

3/160.188

E24.1

15.011.3

7.55.8

1/40.250

R30.0

20.015.0

10.58.5

5/160.313

37.625.0

18.813.1

10.0

3/80.375

F38.3

28.122.5

15.011.3

1/20.500

O52.0

39.030.0

22.016.0

5/80.625

O70.0

52.537.5

27.520.0

15.0

3/40.750

T66.0

45.032.3

22.5

11.000

90.060.0

44.0

1-1/41.250

102.575.0

70termS of SaLe




LocalTel: 651-286-6001Fax: 651-286-5959

CREDIT REQUIREMENTS All orders are subject to approval by our Credit Department. If you are a new account, please

furnish us with your tax exempt status, a bank reference, three current supplier references and/

or your current D&B rating with your first order. A credit limit will be imposed on new accounts

until credit has been established.

PAYMENT TERMS Terms are net 10 days. Catalog prices are subject to change without notice.

FREIGHTOrders are shipped F.O.B. from our manufacturing facility. (International Shipments are

Incoterms: Ex Works).

ORDER CANCELLATION In the event an order is cancelled, an additional charge will be assessed to cover the cost of

labor and material.

RETURNED MATERIAL A handling/restocking fee will be applied to all standard products returned for credit. A return

authorization number and shipping instructions must be obtained in advance before an item can

be returned.

CLAIMSAll claims or product shortages must be made within 30 days of the invoice date.

Press Brake Tooling Division12909 Farnham Avenue • White Bear Lake, MN 55110

Tel (Free): 800-445-4518Fax (Free): 800-539-4590Email: [email protected]

PRECISION TOOLING.UNBEATABLE PERFORMANCE.

For more than 40 years, Wilson Tool International ® has

provided industry-leading tooling solutions that enhance

the performance of sheet metal fabricators and

stampers worldwide.

The three divisions of Wilson Tool – Punching, Press

Brake, and Impax – represent the most comprehensive

line of tooling systems and accessories available. Our

ability to consistently provide innovative, high quality

products that outlast and outperform the competition

is why the world’s most successful fabricators rely

upon Wilson Tool tooling systems.

A knowledgeable global sales force, multilingual

customer support staff, same-day shipping and

extensive distribution network are just a few of the

benefits that keep our customers coming back time

and again.

© 2012 Wilson Tool International®

WILSON TOOL INTERNATIONAL

B300C

Wilson Tool International, Inc. - United States

Tel (Free): 800-328-9646 | Tel: 651-286-6001 Fax (Free): 800-222-0002 | Fax: 651-286-5959 Email: [email protected]

Wilson Tool International, Ltd. - United Kingdom

Tel (Free): 0800-373748 | Tel: +44 1793 831818 Fax (Free): 0800-373758 | Fax: +44 1793 831945 or 46 Email: [email protected]

Wilson Tool International - China

Tel: +86 21 51089638 | Fax: +86 21 64422195 Email: [email protected]

Wilson Tool International - Germany

Tel (Free): 00800-9457668665 | Tel: +49 5723 747 0 Fax (Free): 00800-945766329 | Fax: +49 5723 747 10 Email: [email protected]

Wilson Tool International A/S - Denmark

Tel (Free): 80 20 20 24 | Tel: +45 44 53 1699 Fax (Free): 80 20 20 26 | Fax: +45 44 53 0607 Email: [email protected]

Wilson Tool International - France

Tel: +33 (0) 164 13 47 80 | Fax: +33 (0) 164 13 47 81 Email: [email protected]

Wilson Tool International - Argentina

Tel: +54 114 7634004 | Fax: +54 114 5084190 Email: [email protected]

Wilson Tool - South Africa (Pty) Limited

Tel: +27 877 217 875 | Fax: 086 657 8629 Email: [email protected]

The Wilson Tool Company S. de R.L. de C.V. - Mexico

Tel: 52 (81) 8865-4820 | Fax: 52 (81) 8865-4599 Email: [email protected]

Exacta Precision Products - Ontario

Tel: 800-268-5573 | Fax: 800-668-9314 Email: [email protected]

Exacta FabTool - Ontario

Tel: 905-840-2240 | Fax: 905-840-1032 Email: [email protected]

Milling Puncionadeiras - Brazil

Tel/Fax: 55 11 5621-2100 Email: [email protected]

press brake tooling

Documents

euro quick change

change tools

quick setups

setups quick

low profile quick change

quick delivery

acute angle punch

acuteangle punches