presenting our newest innovation tilting elevator … tilting... · tilting elevator conduit cart...
TRANSCRIPT
PRESENTING OUR NEWEST INNOVATION
CONTACT THE BHS SALES TEAM FOR MORE INFORMATION ABOUT THIS PRODUCTFlip sheet over to learn more about this electrical solution. [email protected]
TILTING ELEVATOR CONDUIT CART
It’s not always easy to move bulk loads of electrical conduit through a narrow space, like an elevator car or a sharp corner in a tight hallway. The Tilting Elevator Conduit Cart (CC-ELV-1K) provides the solution. This unit’s conduit bed lifts and tilts up to 45 degrees, shrinking the overall footprint in an instant.
Highly Mobile on the Job Site
The cart’s frame is thin enough to slide easily through standard doorways and into elevator cars, while the deep conduit bed and a heavy-duty load capacity can handle a full job’s worth of product.
Adjustable Conduit Bed Fits Virtually Anywhere, Stores with Minimal Footprint
Smooth-Rolling Industrial Casters
Polyurethane-covered steel casters operate under heavy loads, and won’t mark floors. Two swivel and two fixed casters provide trouble-free steering and straight travel.
Rugged Steel Frame and Durable Powder Coating
Comfortable, Ergonomic Controls
The conduit bed tilts 45 degrees, then locks into three positions by pulling a spring loaded locking pin. Two tilt-assist handles provide total control over the process.
Raise or lower the conduit bed for ergonomics during loading and unloading. Tilt conduit 45 degrees to fit into tight spaces, like elevators.
Like all BHS Material Handling Equipment, the CC-ELV-1K is built to last. A steel frame and a damage-resistant powder coating protect the unit for a long service life.
ELECTRICAL MATERIAL CARTSTILTING ELEVATOR CONDUIT CART
Heavy‐duty steel construction and durable powder coat finish resists rust and scratches
Durable Construction
NORTH AMERICA: P.O. Box 28990, St. Louis, MO 63132 USA • 1.800.BHS.9500 • Fax: 314.423.6444 • [email protected] • BHS1.comINTERNATIONAL: P.O. Box 12429, St. Louis, MO 63132 USA • +1 314 423 2075 • Fax: +1 314 423 3034 • [email protected] Specifications are subject to change without notice. ©2019 BHS, Inc. St. Louis, MO. Data Sheet: PL-8500 08/19
Two steel tie-down plates for strapping and securing a load
Secure Materials
Bed pivots for improved ergonomics during loading and unloading
Injury Preventing Design
The Elevator Conduit Cart is designed for standard 10’ lengths of conduit and has a load capacity of 1,000 lbs
Capacity
Two rigid and two locking swivel casters improve mobility
Highly Mobile
Take your brand onto the jobsite with custom laser logos
Custom Laser-Cut Logo
Model Capacity Width Depth Height Casters
CC-ELV-1K 1,000 lb / 454 kg 30.339” / 771 mm Lowered: 71.5” / 1816 mm Raised: 80.625“ / 2048 mm
Lowered: 88.125” / 2238 mm Raised: 51.063“ / 1297 mm
Two rigid and two locking swivel casters
Conduit bed tilts to allow for easy access into and out of elevators as well as standard doorways
Navigate Elevators and Doorways with Ease
The Elevator Conduit Cart is equipped with ergonomic handles for simplified positioning
Ergonomic Handle