Our classic, high quality acrylic paint has been tested and is trusted by the people of the Northwest. It has become the paint of choice for everyday projects by homeowners and professionals alike. Premium is specially formulated to provide rich, lasting color and performs well in today’s popular deep-toned colors. Available in four sheens, it is perfect for any wall surface in your home or offi ce.

Premium is also available in Super White Base, which is enhanced with more titanium oxide and resin for increased hide or coverage when painting with white or light colors.

• High-quality acrylic resin system• Easy to apply• Low odor• Great coverage and hide• Splatter resistant• Excellent durability and washability• Easy clean-up with water• Available in Super White Base

O U R C L A S S I C I N T E R I O R P A I N T

PREMIUM

F L A TA flat finish will minimize visibility of surface imperfections due to a lack of light refraction. It is less washable and designed for applications where to sheen is desired, such as ceilings, formal living and dining rooms or uneven surfaces.

S A T I NThis finish will minimize dirt pickup and is washable. Ideal for rooms that have an average amount of use and where a deep, rich look with some sheen and washability are desired.

SPECIFICATIONS FOR PREMIUM

SPECIFICATIONS FOR SUPER PREMIUM WHITE BASE

E G G S H E L LIdeal for projects where a deep, rich look is desired yet only a minimal sheen is needed. It is designed for areas that require minimal washability and have limited use.

S E M I G L O S SThis high-sheen product is very washable and perfect for areas that are more susceptible to dirt, grease and moisture. Ideal for high-traffic areas or the most used rooms in a home, such as the den, bathroom, or kitchen.

Specif ication f igures should be taken as accurate for products being produced at the time of publication in untinted white bases only. Formulation improvements may be made from time to time that may affect these f igures to some degree. Manufacturing tolerances of +/-2% are considered acceptable . Whenever a change is made that the Manufacturer considers substantial , the Specif ication wil l be revised.

Mil ler and Mil ler Paints are registered trademarks of Mil ler Paint Co., Inc . Portland, OR.REV 9/16

Volume SolidsViscosityWeight Per GallonGlossV.O.C. (minus water)

FLAT34.0%98-103 KU11.3#0-5%@60°43.5 g/L

EGGSHELL35.0%98-103 KU10.92#4-8%@60°46.0 g/L

SATIN36.1%98-103 KU10.51#10-15%@60°45.0 g/L

SEMIGLOSS33.5%98-103 KU10.3#60-70%@60°49.0 g/L

COVERAGE: Approximately 350-400 square feet per gallon @ 1.5 dry mils. Two coats recommended for even coverage. Coverage depends on porosity and profile of the surface.

DRY TIME: One hour to touch and four hours to recoat @ 70°F and 50% relative humidity.

Volume SolidsViscosityWeight Per GallonGlossV.O.C. (minus water)

FLAT34.5%98-103 KU11.52#0-5%@60°47.0 g/L

EGGSHELL37.8%98-103 KU10.97#4-8%@60°48.0 g/L

SATIN35.8%98-103 KU10.68#10-15%@60°44.0 g/L

SEMIGLOSS35.0%98-103 KU10.95#45-55%@60°49.0 g/L

COVERAGE: Approximately 375-425 square feet per gallon @ 1.5 dry mils. Two coats recommended for even coverage. Coverage depends on porosity and profile of the surface.

DRY TIME: One hour to touch and four hours to recoat @ 70°F and 50% relative humidity.

O U R C L A S S I C I N T E R I O R P A I N T

PREMIUM ENAMEL

Established in 1890, Miller Paint is an employee owned company with a proud Northwest tradition of creating products made for our unique Northwest climate. From our humble beginnings as a family-run company, to a company with over 300 employees and over 50 locations, Miller Paint has always been there for the professional and homeowner alike.

For a location near you, go to www.millerpaint.com

ABOUT MILLER PAINT