Prefabricated Posts for CrossbarsPre-assembled for .47"-diameter crossbars, these posts will save valuable time at the construction site. Choose either floor or fascia mounting condition. Comes with pre-installed adjustable saddle to accommodate stairs. Corrosion-resistant 316 Stainless Steel adds beauty to any environment.

Undrilled PostsThese undrilled posts allow you to completely customize your railing project. Add glass clips to support glass panels, perpendicular collars to attach tubing or drill to accommodate cable. Choose either floor or fascia mounting condition.

Part Number Description

49-B424/36/F/MD/BS36"-high Floor-mount Prefabricated Post for .47" Crossbars with Flange and Adjustable Saddle

49-B424/36/W/MD/BS36"-high Fascia-mount Prefabricated Post for .47" Crossbars with Flange and Adjustable Saddle

Part Number Description

49-U424/38/F/BL 36" Floor-mount Undrilled Post w/flange (no canopy)

49-U424/44/W/BL 42" Fascia-mount Undrilled Post

Prefabricated PostsPre-assembled posts that come with your choice of mounting condition: floor- or fascia-mount!

Project above shown using Undrilled Posts with radius glass grips, adjustable saddle, tubing with half-ball end cap and flange canopy (see back for item numbers).

Project above shown using Crossbar Posts with crossbar holders, crossbar rods and 1.67" satin tubing with flush end caps (see back for item numbers).

6 Locations to Serve You:

Flush Elbow Perpendicular CollarGlass Grips

Adjustable Saddle!

LOS ANGELES8300 San Fernando Rd.

(818) 729-3333

SAN DIEGO7550 Ronson Road

(858) 277-8200

PHOENIX5150 S. 48th Street

(602) 454-1500

IRVINE2481 Alton Parkway

(949) 250-3343

RIVERSIDE301 Main Street(951) 300-9900

TUCSON3757 E Columbia Street

(520) 441-5900

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Cro

ssba

r Fi

ttin

gsP

refa

bric

ated

Pos

tsEn

d C

aps

Con

nect

ors

Gla

ss G

rips

Tubi

ngC

hann

el T

ube

Fitt

ings

Flan

ge

Can

opy

Easy, Ready-made, Pre-assembled Posts

A 49-B424/36/F/MD/AS 36"-high floor-mount prefabricated post for .47" crossbars with flange and ball adjustable saddle. 1.67" diameter tubing.

B 49-B424/36/W/MD/AS 36"-high fascia-mount prefabricated post for .47" crossbars and ball adjustable saddle. 1.67" diameter tubing.

C 49-U424/38/F/BL Undrilled 38"-high floor-mount post, the foundation for custom railing projects. 1.67" diameter tubing.

D 49-U424/44/W/BL Undrilled 44" fascia-mount post, the foundation for custom railing projects. 1.67" diameter tubing.

Modular, Do-It-Yourself Components

49-RH101/424 Center Standoff Crossbar Holder, .47" in diameter for 1.67" tubing.

49-RH102R/424 Right End Standoff Crossbar Holder, .47" in diameter for 1.67" tubing.

49-RH102L/424 Left End Standoff Crossbar Holder, .47" in diameter for 1.67" tubing.

49-RCF101 Ball Finial finishes the look of .47"-diameter crossbar rods.

49-602/424 Half Ball End Cap for 1.67"-diameter tubing. Finishes railing with a clean rounded look.

49-600PF/424 Flat Knurled End Cap for 1.67"-diameter tubing. Knurled edging connects securely without adhesive.

49-818/424 Perpendicular Collar, 1.67" x .08" connects tubing to tubing.

49-732/424 Flush Elbow, 1.67" x 0.08" connects tubing at a 90° angle.

49-732A/424 Adjustable Flush Elbow, 1.67" x .08" connects tubing at any angle.

49-734/424 Flush Tee, 1.67" X 0.08" connects three pieces of tubing.

49-821/424 Adjustable Ball Saddle, 1.67" attaches handrail to posts.

49-852R/424 Radius Glass Grip for 1/2" Glass for 1.67" tubing. Use with rubber insert 85-GGI1015

85-GGI1015 Rubber Insert for 1/2" Glass: use with Radius Glass Clip 49-852R/424

49-850R/424 Radius Glass Grip for 1/4"–3/8" Glass for 1.67" tubing.

85-GGI1007 Rubber Insert for 1/4" Glass: use with Radius Glass Clip 49-850R/424

85-GGI1008 Rubber Insert for 1/2" Glass: use with Radius Glass Clip 49-850R/424

49-860S/424 Square Glass Grip, For 1/2" Glass for 1.67" tubing.

85-GGI1006 Radius Insert for 1/2" Glass: use with Square Glass Grip 49-860S/424

49-850S/424 Square Glass Grip, For 1/4 - 3/8" Glass for 1.67" tubing.

85-GGI1003 Insert for 1/4" Glass. Use with 49-850S/424

85-GGI1004 Insert for 3/8" Glass. Use with 49-850S/424

49-846E/424 Round Glass Grip for 1/2" glass. Made for 1.67"-diameter tubing. End position. Use with rubber insert 85-GGI1002.

49-846C/424 Round Glass Grip for 1/2" glass. Made for 1.67"-diameter tubing. Center position. Use with rubber insert 85-GGI1002.

85-GGI1002 Rubber Insert for 1/2" Glass: use with 49-846E/424 and 49-846C/424.

49-732UV/424 90° Vertical Elbow Channel, 1.67" x.059".

49-732UH/424 90° Horizontal Elbow Channel, 1.67" x.059".

49-640/424 End Cap for Channel Tubing, 1.67" x.059"

49-540/424 Flange Canopy for 1.67"-diameter tubing. Perfect for finishing Undrilled Floor-mount Posts (item #49-U424/38/F/BL).

49-A114/20 1.67"-diameter tubing in satin 316 stainless steel. 1.67" x.08" x 20'.

49-R038/20 Crossbar Rod: .47" in diameter, solid satin-finish 316. 20".

49-A114U/16 Channel Tubing: 1.67" x .06" x 16'.

A CB DPart Number DescriptionOrder Quantity

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor