precision pneumatic and electropneumatic controlsprogtech.ae/pdf/pts4 - controlair...
TRANSCRIPT
Precision Pneumatic andElectropneumatic Controls Current-to-Pressure (I/P) Transducers Voltage-to-Pressure (E/P) Transducers Pressure-to-Current (P/I) Transducers Precision Air Pressure Regulators Valve Positioners Filter Regulators Volume Boosters Snap Acting Relays & Bias Relays Motorized Regulators Liquid Level Systems Friction-free Diaphragm Air Cylinders Custom Engineered Devices
Short Form Catalogue
Regulators
Flow Capacity SCFM (Nl/min) 14 (420)Exhaust Capacity SCFM (Nl/min)
Type 100 3(90)Type 100HR 11(330)Type 100EHR 15(450)
Sensitivity Inch wc (mm) 0.125 (3.2)
Supply Pressure max. psig (BAR) 150 (10)
Approximate Size (inches) 2.0 x 2.06 x 4.26
Approximate Size (mm) 52 x 52 x 108
Range psig(BAR)Port Size NPT/BSPModel# NPT/BSP0.5-25 (0.03-1.7) 1/4 120-BA/120-BAU2-40 (0.14-2.7) 1/8 100-AA/100-AAU
1/4 100-BA/100-BAU3/8 100-CA/100-CAU
2-60 (0.14-4) 1/8 100-AB/100-ABU1/4 100-BB/100-BBU3/8 100-CB/100-CBU
2-120 (0.14-8) 1/8 100-AC/100-ACU1/4 100-BC/100-BCU3/8 100-CC/100-CCU
Highest level ofregulation accuracyand repeatabilityavailable
1/8", 1/4", 3/8"NPT/BSP porting
Able to hold setpressure over longperiods of time
High relief capacity,plunger operated,manifold mounted,and low range models are available
Type 100 PrecisionAir Pressure Regulator
Flow Capacity SCFM (Nl/min) 22 (660)
Exhaust Capacity SCFM (Nl/min) 0.1 (3)
Sensitivity Inch wc (mm) 1.0 (25.0)
Supply Pressure max. psig (BAR) 250 (17)
Type300/Type310NACE/Type320FilterRange psig (BAR) Port Size NPT Model#0-10 (0-0.7) 1/4 300-BD0-30 (0-2) 1/4 300-BA/310-BA0-60 (0-4) 1/4 300-BB/310-BB0-100 (0-6.8) 1/4 310-BC0-120 (0-8.0) 1/4 300-BCN/A 1/4 320-BX
Provides clean, accurate air pressure
Epoxy paint finishstandard
Stable output andrepeatability
High capacity, long lasting depth filter
Low droop Materials in the
Type 310 meet NACE MR-0175 requirements
Low temperature option Filter only unit available
Type 300 Instrument Air Filter & Regulator
Exhaust Capacity SCFM (Nl/min) 0.1 (3)
Sensitivity Inch wc (mm) 1.0 (25.0)
Supply Pressure max. psig (BAR) 250 (17)
Auto Drain:Supply Pressure max. psig (BAR) 150 psig (10)
Cv Values: 1/4"NPT 0.5 at 150 psig supply and 80 psig setpoint
1/2"NPT 2.5 at 150 psig suppy and 80 psig setpoint
Direct, pipe or bracket mounting Tapped exhaust and panel mount options Second gauge port Low temperature option Automatic drain option Type 335 meets NACE MR-0175
requirements (available in 1/4" only)
Type 330/335/340 Instrument Air Filter Regulator& Regulator
Lightweight compacthousing with epoxypaint withstands harshenvironments
1/4", 1/2" NPT porting High flow capacity
Flow capacity SCFM (NL/min) 14 (420)
Exhaust Capacity SCFM (NL/min) 7 (210)
Sensitivity Inch wc (mm) .25 (6.4)
Supply Pressure max. psig (BAR) 150 (10)
Approximate Size (inches) 1.38x1.38x3.88
Approximate Size (mm) 35.1x35.1x98.5
Range psig (BAR) Port Size NPT/BSP Model# NPT/BSP0.70-30 (0.05-2) 1/8” 90-AA/90-UA1.4-60 (0.1-4) 1/8” 90-AB/90-UB1.4-120 (0.1-8) 1/8” 90-AC/90-UC
1/8" NPT/BSPporting
High resolutionadjustment of setpressure
Will fit into tightspace requirements
Lightweight die castaluminum construction
Compact, lightweight unit
Type 90 Subminiature Precision Air Pressure Regulator
Range PortSizeNPT Filter Regulator Regulatorpsig (BAR) Model # Model #0-30 (0-2) 1/4, 1/2 330-BAB, 330-DAB 340-BAB, 340-DAB0-60 (0-4) 1/4, 1/2 330-BBB, 330-DBB 340-BBB, 340-DBB0-120 (0-8) 1/4, 1/2 330-BCB, 330-DCB 340-BCB, 340-DCB
Ideal for control froma remote location
Precise pneumaticcontrol by using anelectrical control
Regulation accuracyand sensitivity of theType 100
Maintains set outputpressure in the eventof a power failure
Compact size
Type 100M Motorized Precision Air Pressure Regulator
Flow Capacity SCFM (Nl/min) 20 (600)
Exhaust Capacity SCFM (Nl/min) 0.1 (3)
Sensitivity Inch wc (mm) 1.0 (25.0)
Supply Pressure max. psig (BAR) 250 (17)
Range psig (BAR) Port Size NPT Model#0-10 (0-0.7) 1/4 400-BD0-30 (0-2) 1/4 400-BA0-60 (0-4) 1/4 400-BB0-120 (0-8) 1/4 400-BC
1/4" NPT porting Repeatable pressure
output Corrosion-resistant
construction Low cost makes this
unit ideal for highvolume OEMapplications
Type 400 General Service Pressure Regulator
Regulating Range 0 to 30 in.Hg (-1 to -0.013 BAR)
Atmospheric Intake .04 SCFM (1.1 Nl/min)
Sensitivity .5 in w.c. (0.0013 BAR)
Ambient Temperature 32° to 140°F (0° to 60°C)
Weight .93 lbs (.42 kg)
Port size (In and Out) 1/4 NPT
Port size (Gauge) 1/8 BSPT (Rc1/8)
Flow rate (max.) 3.5 SCFM (100 Nl/min)
Range in.Hg (BAR) Port Size NPT Model#0-30 (-1 to -0.013) 1/4 480V-BA
1/4" NPT porting Comes standard with
panel nut andmounting bracket
Integral locking knobprevents inadvertentadjustments
Type 480 Vacuum Regulator
Flow Capacity SCFM (Nl/min) 14 (396)
Exhaust Capacity SCFM (Nl/min) 5 (3.5)
Total Air Consumption SCFM 0.10
Supply Pressure max. psig (BAR) 150 (10)
Motor Type Reversible, synchronous motor with gear drive and slip clutch
Range psig(BAR) Approx. Time to Cover Full Range (seconds)2RPM 6RPM
2-40 (0.14-2.8) 120 402-60 (0.14-4) 90 30
2-120 (0.14-8.3) 150 50
Instrument quality air for corrosive environments.316 stainless steel internal and external1/4" & 1/2" NPT portingMeets NACE MR-0175requirements.
Low temperatureoption
Automatic drainoption
Type 350/360/370SS Stainless Steel Filter Regulator,Regulator & FilterMaximum Flow Capacity SCFM (Nl/min)
1/4” NPT 20 (600)1/2” NPT 160 (4,800)
Exhaust Capacity SCFM (Nl/min) 1.0 (30)
Sensitivity Inch wc (mm) 1.0 (25.0)
Supply Pressure max. psig (BAR) 290 (20)
Type 350SS Filter RegulatorRange psig (BAR) Port Size NPT Model#0-30 (0-2) 1/4, 1/2 350-BA, 350-DA0-60 (0-4) 1/4, 1/2 350-BB, 350-DB0-100 (0-7) 1/4, 1/2 350-BC, 350-DC0-150 (0-10) 1/4, 1/2 350-BD, 350-DD
Type 360SS RegulatorRange psig (BAR) Port Size NPT Model#0-30 (0-2) 1/4, 1/2 360-BA, 360-DA0-60 (0-4) 1/4, 1/2 360-BB, 360-DB0-100 (0-7) 1/4, 1/2 360-BC, 360-DC0-150 (0-10) 1/4, 1/2 360-BD, 360-DD
Type 370SS FilterPort Size NPT Model#
0-30 (0-2) 1/4, 1/2 370-BX, 370-DX
Regulators
Flow Capacity SCFM (Nl/min) 5 (150)
Exhaust Capacity SCFM (Nl/min) 0.4 (12)
Supply Pressure max. psig (BAR) 250 (17)
Approx. Size inches (mm) DIA 1.0 (24.5) H 3.4 (86.4)
Range psig (BAR) Port Size
1/16 NPT 10-32 M50-5 (0-0.4) 800-AA 800-CA 800-BA0-15 (0-1) 800-AB 800-CB 800-BB0-30 (0-2) 800-AC 800-CC 800-BC0-60 (0-4) 800-AD 800-CD 800-BD0-100 (0-7) 800-AE 800-CE 800-BE
Compact unit Flow capacity up
to 5 SCFM Stable/repeatable Lightweight
construction Available with
threaded post /manifold mounting
Type 800 Subminiature Precision Air Pressure Regulator
Flow Capacity SCFM (Nl/min) [gal/min] 24 (720) [2.4]
T850 Exhaust Capacity SCFM (Nl/min) .5 (15)
T850 Supply Pressure max. psig (BAR) 250 (17)
T860 Supply Pressure max. psig (BAR) 150 (10)
Approximate Size (inches) 1.5 x 1.63 x 2.80
Approximate Size (mm) 38.1 x 41.4 x 71.1
Range PortSize AirModel# Water Potablepsig (BAR) NPT/BSP NPT Model# NPT Model# NPT0-5 (0-0.4) 1/8 850-AE 860-AEN 870-AEN
1/4 850-BE 860-BEN 870-BEN0-15 (0-1) 1/8 850-AA 860-AAN 870-AAN
1/4 850-BA 860-BAN 870-BAN0-30 (0-2) 1/8 850-AB 860-ABN 870-ABN
1/4 850-BB 860-BBN 870-BBN0-60 (0-4) 1/8 850-AC 860-ACN 870-ACN
1/4 850-BC 860-BCN 870-BCN0-100 (0-7) 1/8 850-AD 860-ADN 870-ADN
1/4 850-BD 860-BDN 870-BDN
For BSP porting add "U" to end of Model #
Stable (Air/Water/Potable Water) pressure Small, economical
package. Relieving and non-
relieving models Non-rising
adjustment knobwith lockingcapability
Lightweightconstruction
OEM friendly cost 1/8" and 1/4"
NPT/BSP Porting Food grade compliant (870 only)
Type 850/860/870 Minature Air/Water/Potable Water Pressure Regulator
Flow Capacity SCFM (Nl/min) 80 (2,400)
Exhaust Capacity SCFM (Nl/min) 4 (120)
Sensitivity Inch wc (mm) 0.25 (6.4)
Supply Pressure max. psig (BAR) 250 (17)
Approx. Size inches (mm) DIA 3.0 (76) H 6.0 (152)
Flow Capacity SCFM (Nl/min) 50 (1,500)
Exhaust Capacity SCFM (Nl/min) 4 (120)
SEnsitivity Inch wc (mm) 0.25 (6.4)
Supply Pressure max. psig (BAR) 250 (17)
Maximum Flow Coefficients (Cv) Port NPT Forward Exhaust3/4" 5.0 3.51/2" 4.5 3.51/4" 2.0 2.5
Exhaust Capacity SCFM (Nl/min) 3/4" 80 (2,264 NL/min)1/2" 75 (2,123 NL/min)1/4" 35 (991 NL/min)
Sensitivity Inch wc (mm) 0.25 (6.4)
Effect of Supply Pressure <0.3 psi (.007 BAR) forVariation on Output 100 psi (6.7 BAR) change
Air Consumption <12 scfh at 200 psig output
Supply Pressure max. psig (BAR) 250 (17.5)
Accurate pressurecontrol
1/4", 3/8", 1/2"NPT/BSP porting
Allows flow capacityup to 80 SCFM
Dampening action ofaspirator tubeprovides stabilityunder varying flowconditions
Sensitive to minutechanges in down stream pressure
Sensitive protectionagainst overpressurization in thedownstream portionof a pneumaticsystem. Operates asa high precisionrelief valve with anadjustable set point.
1/4", 3/8", 1/2"NPT/BSP porting
Type 700 Precision Pressure Regulator
Type 3500/3600 High Pressure Regulator 6000 psi max. supply Repeatable pressure output Corrosion-resistant construction Low cost makes this unit ideal for high volume
OEM applications
Supply Pressure max. psig (BAR) 6000 (413)
Temperature Range -70° to 225°F
Type 3500 BrassType 3600 316 Stainless SteelRange psig Port Size Adjustment Model#(BAR) NPT
0-125 (0-9) 1/4 socket 3500-BC, 3600-BC0-150 (0-10) 1/4 socket 3500-BD, 3600-BD0-225 (0-16) 1/4 socket 3500-BE, 3600-BE0-125 (0-9) 1/4 Tee Handle 3500-CC, 3600-CC0-150 (0-10) 1/4 Tee Handle 3500-CD, 3600-CD0-225 (0-16) 1/4 Tee Handle 3500-CE, 3600-CE
Rangepsig (BAR) Port Size NPT Model#0-2 (0-0.14) 1/4, 3/8, 1/2 710-BA, 710-CA, 710-DA0-15 (0-1) 1/4, 3/8, 1/2 710-BC, 710-CC, 710-DC0-30 (0-2) 1/4, 3/8, 1/2 710-BD, 710-CD, 710-DD0-60 (0-4) 1/4, 3/8, 1/2 710-BE, 710-CE, 710-DE0-150 (0-10) 1/4, 3/8, 1/2 710-BF, 710-CF, 710-DF
Rangepsig (BAR) Port Size NPT Model#0-2 (0-0.14) 1/4, 3/8, 1/2 700-BA, 700-CA, 700-DA0-15 (0-1) 1/4, 3/8, 1/2 700-BC, 700-CC, 700-DC0-30 (0-2) 1/4, 3/8, 1/2 700-BD, 700-CD, 700-DD0-60 (0-4) 1/4, 3/8, 1/2 700-BE, 700-CE, 700-DE0-150 (0-10) 1/4, 3/8, 1/2 700-BF, 700-CF, 700-DF
Type 700BP Precision Back Pressure Regulator
1/4”, 1/2”, 3/4” NPT porting
Two 1/4" NPT gauge ports
High forward and exhaust flow
Low droop andprecise adjustment
Multiple port options Balanced supply
valve
Rangepsig (BAR) Port Size NPT Model#0-2 (0-0.15) 1/4, 1/2, 3/4 7000-BA, 7000-DA, 7000-EA0-10 (0-0.69) 1/4, 1/2, 3/4 7000-BB, 7000-DB, 7000-EB0-30 (0-2.0) 1/4, 1/2, 3/4 7000-BC, 7000-DC, 7000-EC0-60 (0-4.0) 1/4, 1/2, 3/4 7000-BD, 7000-DD, 7000-ED0-100 (0-7) 1/4, 1/2, 3/4 7000-BE, 7000-DE, 7000-EE0-100 (0-7) 1/4, 1/2, 3/4 7000-BE, 7000-DE, 7000-EE0-150 (0-10) 1/4, 1/2, 3/4 7000-BF, 7000-DF, 7000-EF0-200 (0-13.8) 1/4, 1/2, 3/4 7000-BG, 7000-DG, 7000-EG
Type 7000 High Flow Precision Regulator
Supply Pressure max. 250 psi (17 BAR)
Air Consumption max. 6 scfh (3 Nl/min)
Maximum Flow Coefficients (Cv) Port Forward Exhaust3/4" 5.0 3.51/2" 4.5 3.51/4" 2.0 2.5
Exhaust Capacity SCFM (Nl/min) 3/4" 80 (2,264 NL/min)1/2" 75 (2,123 NL/min)1/4" 35 (991 NL/min)
Sensitivity Inch wc (mm) <1/4 (6.3)
Senses output pressuredeviations to within1/4 inch watercolumn pressure
1/4", 1/2", or 3/4"NPT porting
Two 1/4" NPT gaugeports
High flow capacity Standard tension nut
prevents inadvertentpressure adjustment
Stable output Balanced supply valve
Rangepsig (BAR) Port Size NPT Model#2-40 (0.14-2.7) 1/4, 1/2, 3/4 7100-BA, 7100-DA, 7100-EA2-60 (0.14-4.1) 1/4, 1/2, 3/4 7100-BB, 7100-DB, 7100-EB2-120 (0.14-8.2) 1/4, 1/2, 3/4 7100-BC, 7100-DC, 7100-EC
Type 7100 Precision Air Pressure Regulator
All 316 stainlesssteel construction
3/4” & 1” NPT/BSPported version
High flow capacityNACE approvedAutodrain option Tapped exhaust
Type 380/390SS Stainless Steel Filter Regulator & RegulatorMaximum Flow 3/4" NPT 6.0Coefficients (Cv) 1” NPT 7.0
Maximum Flow 3/4” NPT 350 (9,905)Capacity SCFM (Nl/min) 1” NPT 400 (11,320)
Supply Pressure max. 290 psig (20 BAR)
Operating Temperatures -40° to 200°F (-40°to93°C)
Filter 25 micron or 5 micron filter Weight Type 380 15 lbs (6.80 kg)
Type 390 13 lbs (5.90 kg)
Range psig (BAR) Port Size NPT Model#0-30 (0-2) 3/4, 1 380-EA, 380-FA0-60 (0-4) 3/4, 1 380-EB, 380-FB0-100 (0-7) 3/4, 1 380-EC, 380-FC0-150 (0-10) 3/4, 1 380-ED, 380-FD0-200 (0-14) 3/4, 1 380-EE, 380-FE
Type 390 Stainless Steel RegulatorRange psig (BAR) Port Size NPT Model#0-30 (0-2) 3/4, 1 390-EA, 390-FA0-60 (0-4) 3/4, 1 390-EB, 390-FB0-100 (0-7) 3/4, 1 390-EC, 390-FC0-150 (0-10) 3/4, 1 390-ED, 390-FD0-200 (0-14) 3/4, 1 390-EE, 390-FE
Type 380 Stainless Steel Filter Regulator
I/P, E/P, P/I Transducers
Intrinsically Safe – I/P, E/P
Output pressurefrom 3–15 psig to3–120 psig
NEMA-4X (IP65)Enclosure (optional)
Integral volumebooster
Agency approvals Field reversible Easy span and zero
adjustmentAlso Available:Type 500X High Pressure RangeFlow Capacity SCFM (Nl/min) 20 (600)Terminal Based Linearity (% of span) ±1.5Supply Pressure max. psig (BAR) 150 (10)
Input SignalOutput Range PSI (BAR)Model# NPT/BSP4-20 mA 2-60 (0.14-4) 500-AG/500-AGU4-20 mA 3-120 (0.2-8) 500-AH/500-AHU0-60 mA 2-120 (0.14-8) 500-BF/500-BFU0-5 V 2-60 (0.14-4) 500-CF/500-CFU0-10 V 3-120 (0.2-8) 500-EH/500-EHU
Type 500X Transducer (I/P, E/P)Flow Capacity SCFM (Nl/min) 12.0 (360)
Terminal Based Linearity (% of span) ±0.75
Repeatability (% of span) <0.5
Supply Pressure max. psig (BAR) 100 (7)
Port Size (Pneumatic) 1/4 NPT, 1/4 BSP
Port Size (Electric) 1/2 NPT
Approximate Size (inches) 2.18 x 2.18 x 4.24
Approximate Size (mm) 55.4 x 55.4 x 107.7
Input Signal Output Range PSI (BAR) Model# NPT/BSP4-20 mA 3-15 (0.2-1) 500-AC/500-ACU4-20 mA 3-27 (0.2-1.8) 500-AD/500-ADU4-20 mA 6-30 (0.4-2) 500-AE/500-AEU4-20 mA 1-17 (0.07-1.2) 500-AF/500-AFU10-50 mA 3-15 (0.2-1) 500-BC/500-BCU10-50 mA 3-27 (0.2-1.8) 500-BD/500-BDU10-50 mA 6-30 (0.4-2) 500-BE/500-BEU0-5 Vdc 3-15 (0.2-1) 500-CC/500-CCU0-5 Vdc 3-27 (0.2-1.8) 500-CD/500-CDU0-5 Vdc 6-30 (0.4-2) 500-CE/500-CEU1-9 Vdc 3-15 (0.2-1) 500-DC/500-DCU1-9 Vdc 3-27 (0.2-1.8) 500-DD/500-DDU1-9 Vdc 6-30 (0.4-2) 500-DE/500-DEU
Unit self-corrects tomaintain precisecontrol of outputpressure
Shock, vibrationand positioninsensitive
High accuracy Noninteractive zero
and span Wall, panel, pipe,
DIN rail (optional)or manifoldmounting
DIN 43650, terminal block orconduit electricalconnections
NEMA-4X(IP65)Enclosure
Supply pressures up to 130 psig Built-in volume booster Direct / reverse acting, full / split range
Type 900X Transducer (I/P, E/P)Inputs 4-20 mA, 0-5 Vdc,
1-9 Vdc, 0-10 Vdc, 1-5 Vdc
Flow Capacity SCFM (Nl/min) 12.0 (360)
Terminal Based Linearity (% of span) ±0.10
Repeatability (% of span) <0.10
Supply Pressure max. psig (BAR) 100 (7)
Port Size (Pneumatic) 1/4 NPT, 1/4 BSP
Port Size (Electric) 1/2 NPT
Approximate Size (inches) 1.5 x 2.2 x 3.7
Approximate Size (mm) 38.1 x 55.9 x 93.7
Input Signal Output Range PSI (BAR) Model# NPT/BSP4-20 mA 3-15 (0.20-1.00) 900-ACA/900-ACAU
4-20 mA 3-27 (0.2-1.9) 900-ADA/900-ADAU
4-20 mA 6-30 (0.4-2.1) 900-AEA/900-AEAU
4-20 mA 1-17 (0.07-1.2) 900-AFA/900-AFAU
0-10 Vdc 3-15 (0.20-1.00 900-ECA/900-ECAU
0-10 Vdc 3-27 (0.2-1.9) 900-EDA/900-EDAU
0-10 Vdc 6-30 (0.4-2.1) 900-EEA/900-EEAU
0-10 Vdc 1-17 (0.07-1.2) 900-EFA/900-EFAU
Inputs 4-20 mA, 0-5 Vdc,0-10 Vdc, 1-9 Vdc
Flow Capacity SCFM (Nl/min) 12.0 (360)
Linearity (Independent) % of span <±0.5
Repeatability % of span <0.5
Supply Pressure max. psig (BAR) 100 (7)
Port Size (Pneumatic) 1/4 NPT, 1/4 BSP
Approximate Size (inches) 1.5 x 2.2 x 3.7
Approximate Size (mm) 38.1 x 55.4 x 93.7
Input SignalOutput Range PSI (BAR)Model# NPT/BSP4-20 mA 3-15 (0.2-1) 550-ACA/550-ACAU4-20 mA 3-27 (0.2-1.8) 550-ADA/550-ADAU4-20 mA 6-30 (0.4-2) 550-AEA/550-AEAU4-20 mA 2-60 (0) 550-AGA/550-AGAU4-20 mA 3-120 (0) 550-AHA/550-AHAU0-10 Vdc 2-60 (0) 550-EGA/550-EGAU010 Vdc 3-120 (0) 550-EHA/550-EHAU
Compact size,accessible portingand easyadjustments forspace constrainedapplications
DIN 43650, M12, terminal block orconduit electricalconnections
DIN rail, mainifold,pipe, wall or panelmounting available
NEMA-4X(IP65)housing
Zero based and highpressure versionsavailable*
Intrinsically safecertifications
Type 550X Transducer (I/P, E/P)
Accurate pressurecontrol at aneconomical cost
Vibration andposition insensitive
Din rail andmanifold mounting
Manifold or 1/8" NPT portingavailable
Wide operatingtemperature limits
Worldwide safety approvals
Type 590X Transducer (I/P)Terminal Based Linearity (% of span) ±0.5Supply Pressure max. psig (BAR)
Manifold (M) 150 (10.0)1/8" NPT (P) 3-15: 22 (1.5)
3-27, 6-30: 42 (2.8)
Approximate Size (inches) 3.3 x 1.4 x 2.0
Approximate Size (mm) 84.9 x 36.1 x 53.1
Input Signal Output RangePSI (BAR) Connection Model#4-20 mA 3-15 (0.2-1) Manifold 590-ACM4-20 mA 3-27 (0.2-1.8) Manifold 590-ADM4-20 mA 6-30 (0.4-2) Manifold 590-AEM4-20 mA 3-15 (0.2-1) 1/8" NPT 590-ACP4-20 mA 3-27 (0.2-1.8) 1/8" NPT 590-ADP4-20 mA 6-30 (0.4-2) 1/8" NPT 590-AEP
Also Available:Type 550X Zero Based RangeInputs 4-20 mA, 0-5 Vdc,
0-10 Vdc, 1-9 VdcMax. Flow Capacity SCFM (Nl/min) 20 (600) Linearity (Independent) % of span <±1.0Repeatability % of span <1.0Supply Pressure max. psig (BAR) 150 (1050)Port Size (Pneumatic) 1/4 NPTApproximate Size (inches) 1.5 x 2.2 x 5.1Approximate Size (mm) 38.1 x 55.4 x 130
Input Signal Output Range PSI (BAR) Model# NPT/BSP4-20 mA 0-30 (0) 550-AIA/550-AIAU4-20 mA 0-60 (0) 550-AJA/550-AJAU4-20 mA 0-120 (0) 550-AKA/550-AKAU0-10 Vdc 0-30 (0) 550-EIA/550-EIAU010 Vdc 0-60 (0) 550-EJA/550-EJAU010 Vdc 0-120 (0) 550-EKA/550-EKAU
Also Available: Type 900X High OutputInputs: 4-20 mA, 0-10 Vdc,
1-9 Vdc, 0-5 Vdc, 1-5 VdcOutputs psig (BAR): 2-60 (0.14-4), 2-100 (0.14-6.9)Supply Pressure psig (BAR): 65-130 (4.5-9), 105-130 (7.2-9)Air Consumption: 4.5 scfh (2.25 NL/min)
at mid range typicalFlow Capacity: 20 SCFM (566 NL/min)
at 130 psig (9.0 BAR) supply
Input Signal Output Range Model# PSI (BAR) NPT/BSP
4-20 mA 2-60 (0.14-4) 900-AGA/900-AGAU4-20 mA 2-100 (0.14-7) 900-AHA/900-AHAU0-10 Vdc 2-60 (0.14-4) 900-EGA/900-EGAU0-10 Vdc 2-100 (0.14-7) 900-EHA/900-EHAU
Also Available: Type 900X Zero BasedInputs: 4-20 mA, 0-10 Vdc, 1-9 Vdc,
0-5 Vdc, 1-5 VdcOutputs psig (BAR): 0-15 (0-1.0), 0-30 (0-2.1), 0-60 (0-4.1)Supply Pressure psig (BAR): 25-65 (1.7-4.5), 40-70 (2.75-4.8),
70-80 (4.8-5.5)Air Consumption: 1.5 scfh (0.75 NL/min)
at mid range typical4.5 scfh (2.25 NL/min) at mid range typical
Flow Capacity: 4.5 SCFM (127 NL/min) at 130 psig (9.0 BAR) supply20 SCFM (566 NL/min) at 130 psig (9.0 BAR) supply
Input Signal Output Range Model# PSI (BAR) NPT/BSP
4-20 mA 0-15 (0-1) 900-ALA/900-ALAU4-20 mA 0-30 (0-2.1) 900-AIA/900-AIAU4-20 mA 0-60 (0-4.1) 900-AJA/900-AJAU0-10 Vdc 0-15 (0-1) 900-ELA/900-ELAU0-10 Vdc 0-30 (0-2.1) 900-EIA/900-EIAU0-10 Vdc 0-60 (0-4.1) 900-EJA/900-EJAU
Explosion-Proof – I/P P/I
Liquid Level Measuring System
Logic Relays
Manifold
Compact design Explosion-proof
NEMA-4X (IP65)enclosure
RFI, EMI protected Shock, vibration and
position insensitive. Field-selectable
outputs (optional) Highly tolerant of impure air Optional tapped exhaust and conduit seal
required for FM/CSA approval when usingnatural gas (sweet) or methane
Type 950XP Explosion-Proof Transducer (I/P)
Flow Capacity SCFM (Nl/min) 12.0 (360)
Terminal Based Linearity (% of span) ±0.10
Repeatability (% of span) <0.10
Supply Pressure max. psig (BAR) 100 (7)
Port Size (Pneumatic) 1/4 NPT
Port Size (Electric) 1/2 NPT
Approximate Size (inches) DIA 3.50 H 4.60
Approximate Size (mm) DIA 88.9 H 116.6
Input Signal Output Range PSI (BAR) Model#4-20 mA 3-15 (0.2-1) 950-AC4-20 mA 3-27 (0.2-1.8) 950-AD4-20 mA 6-30 (0.4-2) 950-AE4-20 mA Field Selectable 950-ACA4-20 mA Explosion-proof 950-ACA
Type 925 Multi-Function Supply Manifold Common supply port for the Type 550 or
Type 900X I/P, E/P One supply line for multiple outlets Patented individual shut-off valve DIN rail mountable Adaptable to provide common output for
solenoid valves
Dahl P200 Dahl P290Inputs 3-15 psig (0.2-1 BAR), 3-27 psig (0.2-1.8 BAR),
6-30 psig (0.4-2 BAR)or customized up to 0-30 psig (0-2 BAR)
Outputs 2 wire: 4-20 mA and 2 wire: 4-20 mA, 10-50 mA with with over-current over-current limit limit
Loads 700 Ω 2-wire: 700 Ω,(24 Vdc) standard.
Accuracy ± 0.15% of span; ±0.10% of span typical. Includes combined effects of linearity, hysteresis and repeatability errors
Temp. Span and zero: ± 0.007% of span per ˚FStability maximum deviation from 77˚F calibration
Approx. 3.5 x 3.125 .75 x 3.43 x 5.37Size (inches)
Input Signal PSI (BAR)Output Range Model#3-15 (0.2-1) 4-20 mA P200 + P11
3-27 (0.2-1.8) 4-20 mA P200 + P126-30 (0.4-2) 4-20 mA P200 + P133-15 (0.2-1) 4-20 mA P290M + P11
3-27 (0.2-1.8) 4-20 mA P290M + P126-30 (0.4-2) 4-20 mA P290M + P13
Converts standard 3-15, 3-27 or 6-30psig instrument airinto 4-20 or 10-50mA outputs
±0.15% accuracy Custom inputs up to
30 PSI The P200 is FM
approved and CSAcertified as NEMA4(Enc.4) for alllocations andexplosion-proof.
P200/P290M Pneumatic-to-Current P/I Transducers
P200
P290M
Compact design Worldwide safety
approvals Vibration and position
insensitive Low power
consumption
Type 595XP Explosion-Proof Transducer (I/P)Flow Capacity SCFM (Nl/min) 2.4 (72)
Terminal Based Linearity (% of span) ±0.5
Repeatability (% of span) <0.3
Supply Pressure max. psig (BAR) 42 (2.8)
Port Size (Pneumatic) 1/4 NPT
Port Size (Electric) 1/2 NPT
Approximate Size (inches) DIA 2.90 H 5.16
Approximate Size (mm) DIA 73.7 H 131.0
Input Signal Output Range PSI (BAR) Model#4-20 mA 3-15 (0.2-1) 595-AC4-20 mA 3-27 (0.2-1.8) 595-AD4-20 mA 6-30 (0.4-2) 595-AC
Seamless replacements for existing automated controlvalves in the field
Convenient bracketing allows direct or 2”pipe mounting Units come preassembled with filter regulator and
pressure gauge. Explosion-proof and intrinsically safe approvals from
FM, CSA and ATEX
I/PAC Integrated Process Air Control
Requies onlyconnections toair or gassupply, dip tubeand electricalpower source
High accuracyand stability
Visual purgerate indication
Blow-down capability Excellent for hazardous, high-temp., corrosive or
waste water NEMA 4X enclosures available
L100 Bubble Tube Liquid Level SystemDescription Model#Basic System L100Remote Sensing L100RAutomatic Blow-Down L100ARemote Sensing & L100ARAutomatic Blow-Down
Pressure Rating 100 psig max.
Temperature Limits -40°F to +180°F
Port Sizes Tapped for 1/4” NPT with1/8” internal ports
Materials Aluminum, plated steel,neoprene, brass and stainless steel
Snap-acting designautomatically trips oneither an increasingor decreasing signal
Rugged, compactunits engineered forhigh densityapplications
Mite 70/73/74/85 Snap-acting Control Relay with Manual Reset
Pressure Rating 100 psig max.
Temperature Limits -40°F to +180°F
Port Sizes Tapped for 1/4” NPT with1/8” internal ports
Materials Aluminum, plated steel,neoprene, brass and stainless steel
Automatically selectsthe higher or lowerof two pneumaticinputs and passes itdownstream whileblocking the other
Super Mite 71L/71H High Pass or Low Pass Pneumatic Selecting Relay
Volume Boosters
Flow Capacity SCFM (Nl/min) 50 (1,500)
Exhaust Capacity SCFM (Nl/min) 15.0 (450)
Sensitivity Inch wc (mm) 0.25 (6.4)
Supply Pressure max. psig (BAR) 250 (17)
Output Pressure Range psig (BAR) 0-150 (0-10)
Approximate Size (inches) DIA 3.0 H 3.5
Approximate Size (mm) DIA 76 H 85
Port Size NPT/BSP Signal/ Model# NPTOutput Ratio
1/4", 3/8", 1/2" 1:1 600-BA, 600-CA, 600-DA1/4", 3/8", 1/2" 1:2 600-BB, 600-CB, 600-DB1/4", 3/8", 1/2" 1:3 600-BC, 600-CC, 600-DC1/4", 3/8", 1/2" 1:6 600-BD, 600-CD, 600-DD
For BSP porting add "U" to end of Model#
Signal pressure producesan output pressure withhigh flow capacity
1/4", 3/8", 1/2"NPT/BST porting
Flow capacity to 50 SCFM
Available with 1:1, 1:2,1:3 or 1:6 signal tooutput ratio
High relief capacity Negative bias option available
Type 600 Volume BoosterSupply & Signal Pressure 150 psig (10 BAR) max.
Max Flow Coefficients (Cv) Supply 3.0 / Exhaust 3.0
Flow Capacity 115 SCFM (3,450 Nl/min)
Deadband Under 0.25 psig (0.017 BAR)
Signal to Output Ratio 1:1 ± 5%
Temperature Limits -40° to 160°F (-40° to 71°C)
EPDM Option "R" -40° to 230°F (-40° to 110°C)
Silicone -60° to 230°F (-51° to 110°C)
Signal Port 1/4" NPT
Supply/Output Port 1/2" or 3/4" NPT
In/Out Port Construction Model #1/2" NPT Aluminum 6000-DA3/4" NPT Aluminum 6000-EA1/2" NPT Stainless Steel 6000-DS3/4" NPT Stainless Steel 6000-ES
1:1 signal to outputrelay
High air volume forrapid actuatorstroking
Adjustable bypassvalve eliminatesactuator overshoot oroverdamping
Soft seat sealing fortight shutoff
Available inaluminum or 316stainless steelcontruction
EPDM or siliconeelastomer options
Type 6000 Volume Booster
Signal/Output Ratio 1:1
Supply Pressure 250 psig (17.0 BAR) max.
Signal Pressure 150 psig (10.0 BAR) max.Maximum Flow Coefficients (Cv) Port NPT Forward Exhaust
3/4" 5.0 3.51/2" 4.5 3.51/4" 2.0 2.5
Exhaust Capacity SCFM (Nl/min) 3/4" 80 (2,264 NL/min)1/2" 75 (2,123 NL/min)1/4" 35 (991 NL/min)
Output Accuracy 1.0% of 100 psi output span
Sensitivity Inch wc (cm) 1” (2.54)
Supply Pressure Effect 0.1 psig (0.007 BAR) for a 25 psig (1.7 BAR) change
Signal Port 1/4” NPT
Supply/Output Port 1/4", 1/2", or 3/4" NPT
Exhaust Port ø7/16" or 1/4" NPT option
Gauge Port (2) 1/4" NPT
1/4”, 1/2”, 3/4” NPTporting
Two 1/4" NPT gaugeports
Integral adjustablebypass valve
High flow capacity Soft valve seat design High temperature operation Two high output exhaust vents Two 1/4" NPT gauge ports
Type 6100 High Flow Capacity Volume Booster
1:1 relay with positiveand negative biasingadjustment capability.
Accurately and quicklyproduces a signalpressure with consistentrepeatability
Output control to within0.1% of full range
Positive or negative biasup to 30 psig
High relief capacity model available Compact unit Available with external bias adjustment (shown)
Type 200 Precision Air Relay
Flow Capacity SCFM (Nl/min) 50 (1,500)
Exhaust Capacity SCFM (Nl/min) 15.0 (450)
Sensitivity Inch wc (mm) 0.25 (6.4)
Supply Pressure max. psig (BAR) 250 (17)
Output Pressure Range psig (BAR) 0-150 (0-10)
Approximate Size (inches) DIA 3.0 H 3.5
Approximate Size (mm) DIA 76 H 85
Port Size NPT/BSP Bias Range PSI (BAR) Model# NPT/BSP1/4 0-15 (0-1) 650-BC/650-BCU1/4 0-30 (0-2) 650-BD/650-BDU1/4 0-60 (0-4) 650-BE/650-BEU1/4 0-150 (0-10) 650-BF/650-BFU
Output pressure isthe sum of the inputsignal pressure plusan adjustablepositive bias
Four bias rangesfrom 0-15 psig to 0-150 psig
Flow capacity to 50 SCFM
Relief capacity to 15 SCFM
Type 650 Positive Bias Relay
Flow Capacity SCFM (Nl/min) 14 (420)
Exhaust Capacity SCFM (Nl/min)Standard Relief 2.0 (60)
High Relief Capacity 10 (300)
Sensitivity Inch wc (mm) 0.125 (3.2)
Supply Pressure max. psig (BAR) 150 (10)
Output Pressure Range psig (BAR) 2-120 (0.14-8)
Approximate Size (inches) 2.06 x 2.06 x 2.88
Approximate Size (mm) 52 x 52 x 73
Port Size NPT/BSP Max.Output Pressure Model#psig (BAR) NPT/BSP
Standard Relief1/4 2-120 (0.14-8) 200-BC/200-BCU3/8 2-120 (0.14-8) 200-CC/200-CCU
High Relief Capacity1/4 2-120 (0.14-8) 210-BC/210-BCU3/8 2-120 (0.14-8) 210-CC/210-CCU
Captures downstreampressure when thesupply pressure fallsbelow a set value
Two pressure ranges 15-60 psig (1-4 BAR) or30-120 psig (2-8 BAR)
Manual relief valve Corrosion-resistance
construction Aluminum or stainless steel material option No leakage in lock-up position
Type 250 Lock-up Air RelayCut-off Pressure Range psig (BAR) 15-60 (1-4)
Supply Pressure max. psig (BAR) 125 (8.35)
Temperature Limits: 0° to 160°F(-18° to 71°C)
Port Size NPT 1/4”
Set Point Rangepsig (BAR) Part Number Construction15-60 (1-4) 250-AA Aluminum30-120 (2-8) 250-BA Aluminum15-60 (1-4) 250-AS Stainless Steel30-120 (2-8) 250-BS Stainless Steel
In/Out Port Construction Model #1/2" NPT Aluminum 6100-DA3/4" NPT Aluminum 6100-EA1/2" NPT Stainless Steel 6100-DS3/4" NPT Stainless Steel 6100-ES
Air Relays
Signal/Output Ratio 1:1
Supply Pressure 250 psig (17.0 BAR) Maximum
Signal Pressure 150 psig (10.0 BAR) MaximumMaximum Flow Coefficients: 3/4"-Forward: 6.0; Exhaust 5.0
1"-Forward: 7.0; Exhaust 5.0
Flow Capacity: 3/4"-350 SCFM (9,905 NL/min); 1"-400 SCFM (11,320 NL/min)100 psig (7 BAR) supply, 20 psig (1.4 BAR) output
Signal to Output 2.0% (% of 100 psi output span)Ratio Accuracy: 1.5% (% of 15 psi output span)
Temperature Limits -40 to 200˚F (-40 to 93˚C)
Low Temperature Limits -62 to 194˚F (-52 to 90˚C)
Deadband Under 0.2 psig (.01 BAR)
Suppy Pressure Effect 0.3 psig (.02 BAR)
1:1 signal to outputrelays utilized in high flow applications
Aluminum or 316stainless steel construction
3/4" or 1" NPT porting SIL3 certifications Integral adjustable
bypass valve High temperature option Soft valve seat design Tapped high output
exhaust port Two gauge ports - optional
output feedback port Low temperature option
Type 6500/6600 Large Flow Capacity Volume Booster
In/Out Port Construction Model #3/4" NPT Stainless Steel 6600-ES1" NPT Stainless Steel 6600-FS
In/Out Port Construction Model #3/4" NPT Aluminum 6500-EA1" NPT Aluminum 6500-FA
Diaphragm Air CylindersA rolling diaphragm provides a low-friction dynamic seal. This designprovides virtually frictionless conversion of fluid pressure to linear force. Low hysteresis No blow-by leakage Foot & clevis mounts
Singel acting & double acting optional Ultra cylinders available with linear ball bearings Standard units are easily modified to meet
individual customer requirements
Valve Positioner
Stable and accurate positioning of rotaryand linear valves
Simple, reliable and user friendly forcalibration, maintenance and field upgrades
Available with worldwide safety approvals inan Intrinsically Safe and Explosion-proofversion
The NEMA-4X (IP 66) housing providesrugged resistance to severe industrialenvironments
Modular constructionBase pneumatic unit can be quickly field converted to a fullyoptioned electro-pneumatic unit.
Rotary and linear, single and double acting External and zero adjustment for easy calibration Compact design
Small size and low weight Vibration, position and shock insensitive Namur rotary mounting kits Linear mounting kits for most valves Stainless steel spool valve
Long operating life
High gain pilot valveProvides quick and accurate valve/actuator response
Standard pointed indicator (rotary), standard blankcover (linear) and optional raised beacon
High maximum supply pressure145 psig (10 Bar)
FM, CSA & ATEX approvalsFor Intrinsically Safe (CA2010/CA2011) andExplosion-proof (CA2020/CA2021) operation
Optional mechanical switches and 4-20mA positionfeedback
Type-2000 Pneumatic (CA2000) Electro-Pneumatic(CA2005/CA2010/CA2011)
Input Signal 3-15 PSI (0.2-1.0 Bar) 4-20 mA (Ri<250 ohms)Supply Pressure <145 PSI (<10 Bar) 21.8-145 PSI (1.5-10 Bar)Linearity Error <0.7 % f.s <1.0% f.sHysteresis <0.4% f.s <0.6% f.sRepeatability <0.3% f.s <0.5% f.sPressure Gain 750 P out/P in 750 P out/P inFlow Capacity SCFM Nl/min SCFM Nl/min@29 PSI (2.0 Bar) 9.5 268.9 9.5 268.9@87 PSI (6.0 Bar) 28.3 800.1 28.3 800.1@145 PSI (10 Bar) 47.1 1333 47.1 1333Air Consumption SCFM Nl/min SCFM Nl/min@29 PSI (2.0 Bar) 0.18 5.09 0.2 5.7@87 PSI (6.0 Bar) 0.53 424.5 0.6 17.0@145 PSI (10 Bar) 0.88 707.5 1.0 28.3Impedance 260 Ohms @ 70˚FLoop Load 5.2 Volts @ 70˚F
Input Signal HoneywellV15S05-CZ100 A05-01
Switch Type SPDTLoop Load 5A 125/ 250 VAC/
0.1A 48 VdcOperating Force 100gf
Position Feedback(F & FS Option)Voltage Supply 12-30 VdcOutput 2 Wire; 4-20 mA DCLoop Impedance Max. 700Ω @ 24 VdcLinearity Error <1.5% F.S.Hysteresis Error <0.5% F.S.
Type 2000 Pneumatic and Electro-Pneumatic Valve Positioner
Functional Specifications
Mechanical Switches(S & FS Option)
Temperature Range -40° to 185° F (-40° to 85° C)Port Sizes Pneumatic: 1/4" NPT; Gauge Ports - 1/8" NPT
Electric: 1/2" NPT; M20-1.5 (ATEX)Media Clean, dry, oil-free instrument air, filtered to 40 micronEnclosure Nema 4X / IP66 aluminum with polyester epoxy finishWeight 3.5 lbs (1.6 kg) 3.8 lbs (1.7 kg) CA2005/CA2010/CA2011
5.1 lbs (2.3 kg) 5.4 lbs (2.5 kg) CA2005 with feedback4.8 lbs (2.2 kg) CA2020/CA2 011
Physical Specifications
Type of Positioner00 P/P Pneumatic05 E/P Electro-pneumatic; no approvals;
general purpose only10 E/P Electro-pneumatic; FM/CSA Intrinsically Safe11 E/P Electro-pneumatic; ATEX Intrinsically Safe20 E/P Electro-pneumatic; FM/CSA Explosion-proof21 E/P Electro-pneumatic; ATEX Flame-proof
Type of MotionR RotaryL Linear
Model
CA20
IndicatorN None (Standard Linear)
A Arrow (StandardRotary)
D Dome (Option)
Spindle0 Namur
(Rotary)1 Standard (Linear)
2 3/8" Square3 1/2" Square
-- - - -
CamC1 90˚/180˚ (Standard Rotary)C2 45˚/90˚C3 30˚/60˚ (Standard Linear)
- Feedback/Switches(factory installed)CA20-05-R or CA20-00-R onlyF 4-20 mA FeedbackS Mechanical Switch(2 spdt)
FS 4-20 mA Feedback& mechanical switches
3/15/19 P/N: 441-625-013
8 Columbia Drive / Amherst, NH 03031 USAWebsite: www.controlair.comEmail: [email protected]/886-9400 Fax: 603/889-1844
An ISO 9001 Registered Company
Distributed by:
Partner with a global companythat delivers top-quality products and
highly-personal, friendly service. Over 30 years of innovation in precisionpneumatic and electro-pneumatic controls
World-wide distribution ISO 9001:2015 registered manufacturing Unparalleled expertise
TRY US...WE'RE EASY!
ControlAir delivers precision pneumatic and electropneumatic controls
to critical industries around the world. AUTOMATED INDUSTRIAL EQUIPMENT
PROCESS CONTROL SYSTEMS
LABORATORY RESEARCH & ANALYSIS
ENERGY MANAGEMENT
FLUID POWER
ROBOTICS
VALVE AUTOMATION
MEDICAL VALVE ACTUATION PAPER & PULP OIL & GAS MARINE OFFSHORE FOOD PROCESSING
Get the details on any ControlAir productand find a distributor in your area.LOG ONTO WWW.CONTROLAIR.COM
Browse our entire product line View complete specifications and
performance data Download product specs and
2D/3D CAD models
OR CALL 603-886-9400 FOR MOREINFORMATION AND A FULL PRODUCT CATALOG
I N S T R U M E N T A T I O N A N D P R O C E S S C O N T R O L S O L U T I O N S F O R T H E N A T U R A L G A S I N D U S T R Y
8 Columbia Drive • Amherst • New Hampshire • 03031 • U.S.A. Tel: (603) 886-9400 • Fax: (603) 889-1844 • Toll Free (800) 216-3636
[email protected] • www.controlair.com
Quick response regulators for reliable valve operation.
Wellhead Instrumentation & Analysis Equipment
Process Control Valve Systems Flare / Burner Systems
High flow regulators for gas vent control.
Precision regulator and low bleed controllers for sensitive instrument control.
Type-950 Explosion-proof I/P Transducer
Specifications
Flow Capacity SCFM (Nl/min): 12.0 (360) Terminal Based Linearity (% of span): +0.10 Repeatability (% of span): < 0.10 Supply Pressure Max. PSIG (BAR): 100 (7) Port Size (Pneumatic): 1/4 NPT Port Size (Electric): 1/2 NPT Operating Temperature: -400 to 1600F (-400 to 710C) Output Pressure Ranges PSIG (BAR): 3-15 (0.2-1), 3-27 (0.2-1.8), 6-30 (0.4-2)
Specifications
Flow Capacity SCFM (Nl/min): 80 (2,400) Exhaust Capacity SCFM (Nl/min): 4 (120) Sensitive Inch wc (mm): 0.25 (6.4) Supply Pressure Max. PSIG (BAR): 250 (17) Approximate Size (inches): DIA 3.0 H 6.0 Approximate Size (mm): DIA 76 H 152 Operating Temperature: -400 to 1600F (-400 to 710C) Output Pressure Ranges PSIG (BAR): 0-2 (0-0.14), 0-15 (0-1), 0-30 (0-2), 0-60 (0-4), 0-150 (0-10)
Type-3500 High Pressure Regulator
Type-350/360 Stainless Steel Filter Regulator & Regulator
Type-330/340 Instrument Air Regulator and Filter Regulator
Type-700 Precision High Flow Pressure Regulator
Specifications
Exhaust Capacity SCFM (Nl/min): 0.1 (2.8) Sensitivity: 1 inch of water Air consumption SCFH (Nl/min): < 5 (2.5) Supply Pressure Max. PSIG (BAR): 250 (17) Operating Temperature: 00 to 1600F (-180 to 710C) 320 to 1600F (00 to 710C) auto drain Port Sizes NPT: 1/4, 1/2 Ranges PSIG (BAR): 0-30 (0-2), 0-60 (0-4), 0-120 (0-8)
Specifications
Flow Capacity SCFM (Nl/min): 20 (600) 1/4" NPT, 160 (4,800) 1/2" NPT Exhaust Capacity SCFM (Nl/min): 1.0 (30) Sensitivity Inch wc (mm): 1.0 (25.0) Supply Pressure Max. PSIG (BAR): 290 (20) Operating Temperature: -200 to 1850F (-290 to 850C) -580 to 1940F (-500 to 900C) low temp. Port Sizes NPT/BSP: 1/4, 1/2 Ranges PSIG (BAR): 0-30 (0-2), 0-60 (0-4), 0-100 (0-7), 0-150 (0-10)
Specifications
Supply Pressure Max. PSIG (BAR): 6000 (413) Operating Temperature: -700 to 2250F (-570 to 1070C) Inlet Port NPT: 1/4" Outlet Ports (3) NPT: 1/4" Weight: 3.25 lb (1.5 kg) Ranges PSIG (BAR): 0-125 (0-9), 0-150 (0-10), 0-225 (0-16),
Features
Explosion-proof NEMA-4X(IP65) enclosure
RFI, EMI protected Shock, vibration and position insensitive Field-selectable outputs (optional) Highly tolerant of impure air Optional tapped exhaust and conduit
seal required for FM/CSA approval when using natural gas (sweet) or methane
Features
Allows flow capacity up to 80 SCFM Dampening action of aspirator tube
provides stability under varying flow conditions
Sensitive to minute changes in down stream pressure
Features
Compact and lightweight construction 1/4" NPT and 1/2" NPT ported versions Automatic drain option High flow capacity Direct, pipe or bracket mounting Low air consumption Tapped exhaust option Rugged, corrosion resistant design
Features
Low temperature option Autodrain option 316 stainless steel internal and external Viton seals NACE approved Large flow capacity Low air consumption Tapped exhaust
Features
Repeatable pressure output Corrosion-resistant construction Choice of three output ports Socket head or Tee Handle adjustment Multi-seat rotating valve block provides
up to 4 replacement sealing surfaces High Maximum inlet pressure Low cost makes this unit ideal for high
volume OEM applications
Other Natural Gas Applications
Offshore Platforms
ControlAir Inc., 8 Columbia Drive, Amherst, New Hampshire 03031 U.S.A. ♦ Tel: (603) 886-9400 ♦ Toll Free: (800) 216-3636 ♦ Fax: (603) 889-1844 ♦ [email protected] ♦ www.controlair.com
Natural Gas Compressors Tank Blanketing
Instrumentation and Process ControlSolutions for the Oil & Gas Industry
ControlAir's Precision PressureRegulators, Filter Regulators,Volume Boosters, Air Relays andI/P Transducers help ensure precise pressure adjustment forinstrumentation and process control in the oil and gas markets.These demanding applicationsrequire accurate and repeatablepressure regulation, sometimesunder extreme conditions.ControlAir's family of StainlessSteel and NACE units providelonger life in offshore and otherharsh environments.Pneumatic and Electro-Pneumatic Regulators areused in the followingapplicationsProcess Control Valves Control of valves with Precision Regulators, I/P PressureTransducers and Volume Boosters Separator SkidsWater and oil separators Rotational Speed Controls onCompressors and TurbinesI/P Transducers are used to control throttle speed Emergency Shutdown System Controls Filter Regulators and VolumeBoosters for quick and reliable valve actuation Flare and Burner SystemsHigh Flow Regulators used for gas vent control Wellhead Instrumentation and AnalysisPrecision Regulators and low bleed I/P Transducers for sensitive instrument control Tank Blanketing PrecisionRegulators for controling tank pressures Natural Gas CompressorsRegulators for fuel systems on compressor skids
TYPE 310/335Filter Regulators
TYPE 350/360/370Filter Regulator/Regulator/Filter
TYPE 380/390SSFilter Regulator / Regulator
TYPE 3500/3600High Pressure Regulators
TYPE 6000Volume Booster
T Y P E 6 1 0 0Volume Booster
T Y P E 6 5 0 0 / 6 6 0 0Large Flow Volume Booster Large
Features
NACE CompliantMaterial (Body)
Output Ranges
Maximum SupplyPressure
Maximum FlowCoefficients (Cv)
Air ConsumptionFlow Capacity
Operating Temperatures
Filter
PortingInlet/Outlet:Gauge(s):Exhaust:
Weight
Operating Media
• Corrosion Resistant Construction• NACE MR0175 Compliant• Depth Filter• Two Outlet Connections• Stable Output and Repeatability• Low Droop At High Flow Levels• Tight Shutoff• Low Air Consumption• Tapped Exhaust
0-30 psig (0-2.1 bar)0-60 psig (0-4.1 bar)0-100 psig (0-6.9 bar)
-20° to 180°F (-29° to 82°C)
Type 350 & Type 360: 0-30 psig (0-2.1 bar)0-60 psig (0-4.1 bar) 0-100 psig (0-6.9 bar)0-150 psig (0-10.3 bar) Type 370: N/A
-20° to 185°F (-29° to 85°C)Autodrain option (Type 350 & Type 370 only):32° to 185°F (0° to 85°C)Low temp option: -61° to 194°F (-52° to 90°C)
0-30 psig (0-2.1 bar) 0-60 psig (0-4.1 bar) 0-100 psig (0-6.9 bar)0-150 psig (0-10.3 bar)0-200 psig (0-13.8 bar)
-40° to 200°F (-40° to 93°C)Autodrain: 32° to 200° (0° to 93°C)
0-125 psig (0-8.6 bar) 0-150 psig (0-10.3 bar) 0-225 psig (0-15.5 bar)
Type 3500: -70° to 225°F (-57° to 107°C)Type 3600: -40° to 225°F (-40° to 107°C)
0-150 psig (0-10.3 bar) 0-150 psig (0-15 bar)0-150 psig (0-10.3 bar)
Type 310: 1.6 lb. (0.72 kg) Type 335: 1.2 lb. (0.54 kg)
Type 350:1/4" NPT: 2.2 lbs. (1.0 kg) 1/2" NPT: 2.8 lbs. (1.3 kg)
Type 360:1/4" NPT: 2.0 lbs. (0.9 kg)1/2" NPT: 2.6 lbs. (1.2 kg)
Type 370:1/4" NPT: 2.1 lbs. (0.95 kg)1/2" NPT: 2.5 lbs. (1.14 kg)
Type 380: 16.6 lbs (7.5 kg)Type 390: 14.5 lbs (6.6 kg)
3.25 lbs (1.5 kg) Type 6500: 6.5 lbs. (2.95 kg)Type 6600: 15 lbs. (6.80 kg)
Aluminum: 5 lbs. (2.3 kg)Stainless Steel:11.7 lbs. (5.3 kg)
2.5 lbs (1.13 kg)
1/4" NPT1/4" NPT1/4" NPT
Type 350/360 Type 3701/4" NPT or 1/2" NPT 1/4" NPT or 1/2" NPT 1/4" NPT 1/4" NPT1/8" NPT —
3/4" NPT or 1" NPT(2) 1/4" NPT1/8" NPT
1/4" NPT 3/4" or 1" NPT(2) 1/4" NPT3/4" NPTSignal port: 1/4" NPT Feedback port option: 1/4" NPT
1/2" or 3/4" NPT1/4" NPT1/2" or 3/4" NPT Signal port: 1/4" NPT
1/4" NPT, 1/2" NPT or 3/4" NPT1/4" NPTø7/16" or 1/4" NPT option
Air, inert gas, sweet (natural) andsour gases
Air, inert gas, sweet (natural) and sour gases Air, inert gas, sweet (natural gas) Type 3500:Air, inert gas, noncorrosive gasesType 3600:Air, inert gas, sweet (natural) andsour gases
Air, inert gas, sweet (natural gas)Air, inert gas, sweet (natural gas) Air, inert gas, sweet (natural gas)
Standard: -40° to 160°F (-40° to 71°C) EPDM option: -40° to 230°F (-40° to 110°C)Silicone option: -60° to 230°F (-51° to 110°C)
-40˚ to 200˚F (-40˚ to 93˚C)
250 psig (17.2 bar) Type 350: 290 psig (20.0 bar) Autodrain: 150 psig (10.34 bar) Type 360: 290 psig (20.0 bar)Type 370: 150 psig (10.34 bar) Autodrain: 150 psig (10.34 bar)
290 psig (20.0 bar) Autodrain: 150 psig (10.0 bar)
6000 psig (413 bar)
250 psig (17.0 bar)150 psig (10.3 bar) 250 psig (17.0 bar)
Type 335: 0.5 at 150 psig supply and 80 psig setpoint
1/4" = 1.21/2" = 3.3
Type 380: 3/4": 9.0; 1": 10.0 Type 390: 3/4": 11.0; 1": 11.0
0.13 3/4" Forward: 8.0Exhaust: 8.0
1" Forward: 9.0Exhaust: 8.0
1/2" Forward: 6.6Exhaust: 5.8
3/4" Forward: 6.8Exhaust: 5.8
Port Forward Exhaust3/4” 5.0 3.51/2” 4.5 3.51/4” 2.0 2.5
• 316 Stainless Steel (Type 350/360/370)• NACE MR0175 Compliant• Autodrain Option (Type 350 & 370)
• 1/4" & 1/2" NPT Ports• Low Temp Option• High Flow Capacity• Tapped Exhaust Port• Minimal Air Consumption
• 316L Stainless Steel Construction• High Flow Capacity• 3/4" or 1" NPT Porting• 2 Gauge Ports• Automatic Drain Option• Soft Seat Self Relieving Design
• 316 Stainless Steel (Type 3600)• NACE MR0175 Compliant (Type 3600)• Choice of Three Output Pressures• Choice of Three Output Ports• Socket Head or Tee Handle• Replacement Valve Seat• Non-Relieving Design (T3600)• High Maximum Inlet Pressure
• Fast Response• Adjustable Bypass Valve• Soft Seat Sealing• Corrosion and Wear Resistant• Choice of Porting
• 1/4", 1/2" or 3/4" NPT Porting• Integral Adjustable Bypass Valve
• High Flow Capacity• Soft Valve Seat Design• High Temperature Operation• 2 High Output Exhaust Vents• 2 1/4" NPT Gauge Ports• Balanced Supply Valve
• 3/4" or 1" NPT Porting• Integral Adjustable Bypass Valve• High Flow Capacity• Soft Valve Seat• High Temp. Operation• Tapped High Output Exhaust Port
• 2 Gauge Ports-Optional• Low Temp. Option• IEC 65108 SIL 3 Compliant
Less than 5 scfh (2.5 Nl/min) 4 scfh (2 Nl/min) maximum 4 scfh (2 Nl/min) maximumType 310: 20 scfm at 100 psig with 20 psig output
Type 380: 3/4" &1": 425 scfm (12,027 Nl/min) Type 390: 3/4": 450 scfm (12,735 Nl/min);
1": 500 scfm (14,150 Nl/min)
300 scfm (8,490 Nl/min) 250 scfm (7,075 Nl/min) 3/4": 375 scfm (10,613 Nl/min)1": 425 scfm (12,028 Nl/min)
40 micron (5 micron option) Type 350/360: 25 micron; optional 5 micron; Type 370: N/A
Type 380: 40 micron (5 micron option)Type 390: N/A
Type 310 & Type 335 Type 350, 360 & 370 Type 3600Diecast Aluminum with Baked Epoxy Finish
316L Stainless Steel 316L Stainless Steel Type 3500: Brass Type 3600: 316 Stainless Steel
Type 6000-EA: AluminumType 6000-ES: Stainless Steel
Aluminum Type 6500: Aluminum Type 6600: 316 Stainless Steel
-40˚ to 200˚F (-40˚ to 93˚C) Low temperature option:-62˚ to 194˚F (-52˚ to 90˚C)
PROCESS CONTROL VALVES SEPARATOR SKIDS EMERGENCY SHUTDOWN VALVE ACTUATION FLARE AND BURNER SYSTEMS WELLHEAD INSTRUMENTATION TANK BLANKETING
CA_Oil-Gas_Brochure.qxp_1-19 1/3/19 1:17 PM Page 4
P/N 441-622-187 1/3/19
8 Columbia Drive / Amherst, NH 03031 USAWebsite: www.controlair.com / Email: [email protected] FAX 603-889-1844An ISO-9001:2008 Certified Company
Note: Supply pressure must be a minimum of 5 psig (0.3 bar) above maximum output
TYPE 595I/P Transducer
TYPE 900I/P Transducer
TYPE 950I/P Transducer
TYPE 2000Valve Positioner
Pneumatic/Electro-PneumaticFeatures
ApprovalsMaterial (Body)
Inputs
Output Rangespsig (bar)
Maximum SupplyPressure
Air ConsumptionCoefficients (Cv)
Operating Temperatures
Porting
Flow Capacity
Operating Media
FM, CSA, ATEX, EAC
3-15 (0.2-1.0)3-27 (0.2-1.9)6-30 (0.4-2.1)
-40°F to 158°F (-40°C to 70°C)Low temperature (L) option:-67ºF to 158ºF (-55ºC to 70ºC)
1-17 (0.1-1.2) 2-60 (0.14-4.1)3-15 (0.2-1.0) 2-100 (0.14-6.9)3-27 (0.2-1.9) 0-60 (0-4.1)6-30 (0.4-2.1) 0-100 (0-6.9)0-15 (0-1) 0-30 (0-2.1)
-40° to 158°F (-40° to 70°C)
3-15 (0.2-1.0)3-27 (0.2-1.9)6-30 (0.4-2.1)
-40° to +158°F(-40° to +70°C)
Pneumatic: 1/4" NPT (P & N versions); 1/16" manifold mount (M version)1/8" NPT Gauge Port (P version)Electric: 1/2" NPT or M20-1.5
Pneumatic: l/4" NPT/BSP Electric: l/2" NPT/BSP
Pneumatic: 1/4" NPT Electric: 1/2" NPT M20 x 1.5 (ATEX)
1/4" NPT; 1/2" NPT; Gauge Ports M20-1.51/8" NPT (ATEX)
Clean, dry, oil-free, instrument air, filtered to 40 micron
Clean, dry, oil-free, instrument air,filtered to 40 micron
Clean, dry, oil-free, instrument air, filtered to40 micron. Sweet naturalgas or methane when purchased with (E)option.
Clean, dry, oil-free instrument air, filtered to 40 micron
-40˚ to 185˚F (-40˚ to 85˚C)
3-15: 22 psig (1.5 bar) max3-27, 6-30: 42 psig (2.8 bar) max
22-60 (1.5-4.1) 65-130 (4.5-9.0)20-100 (1.4-6.9)32-100 (2.2-6.9) 105-130 (7.2-9.0)35-100 (2.4-6.9) 70-80 (4.8-5.5)25-65 (1.7-4.5)40-70 (2.8-4.8)
100 psig (6.9 bar) <145 psi 21.8-145 psi(<10 bar) (1.50-10 bar)
0.1 scfm (2.82 Nl/min) 1.5 scfh (0.75 Nl/min) 4.5 scfh (2.25 Nl/min)at mid range typical at mid range typical
3.0 scfh (1.5 Nl/min) at mid range
Electro-Pneumatic Pneumaticscfm (Nl/min) scfm (Nl/min)
@29 psi (2.0 bar): 0.18 (5.09) 0.2 (5.7)@87 psi (6.0 bar): 0.53 (424.5) 0.6 (17.0)@145 psi (10 bar): 0.88 (707.5) 1.0 (28.3)
• Compact Size • Vibration & Position Insensitive • Low temperature Option• Worldwide Agency Approvals
• Electronic Closed-loop Feedback• Compact Size• Easy Wiring• Input/Output Ports on Front and Back• Intrinsic Safety Approvals• Field selectable outputs (optional)• Field reversable, RFI/EMI protection• Zero-based ranges available
• Optional Field-Selectable Outputs
• Approved for Natural Gas
• RFI/EMI Protected• Compact Size• Low Air / Gas Consumption
• Modular Construction• Rotary & Linear, Single & Double Acting• Optional 4-20 mA Feedbackon Mechanical Switches
• External Zero Adjustment• Compact Design and Low Weight• Vibration/Position/Shock Insensitive• Stainless Steel Spool Valve
4-20 mA Standard Range High Output Range4-20 mA, 0-5 Vdc 4-20 mA, 0-5 Vdc0-10 Vdc, 1-5 Vdc 0-10 Vdc, 1-5 Vdc1-9 Vdc 1-9 Vdc
4-20 mA Pneumatic Electro-Pneumatic3-15 psi 4-20 mA (0.2-1.0 bar) (Ri<250 ohms)
4.5 scfm (127.35 Nl/min) at 25 psig (1.7 bar) supply (3-15, 3-27, 6-30 psig)12.0 scfm (340 Nl/min) at 100 psig (6.9 bar) supply (3-15, 3-27, 6-30, 2-60 psig)
20.0 scfm (566 Nl/min) at 150 psig (10.0 bar) supply (0-120 psig)
2.4 scfm (67.92 Nl/min) max 4.5 scfm (127 Nl/min) at 25 psig (1.7 bar) supply 12.0 scfm (340 Nl/min) at100 psig (6.9 bar) supply
scfm Nl/min@29 psi (2.0 bar) 9.5 268.9@87 psi (6.0 bar) 28.3 800.1@145 psi (10 bar) 47.1 1333
FM, CSA, ATEX, EAC FM, CSA, ATEX, EAC FM, CSA, ATEXChromate-treated aluminum w/epoxy paint NEMA 4X (IP65)
Chromate-treated aluminum w/epoxy paint NEMA 4X (IP65)
Chromate-treated aluminum w/epoxy paint NEMA 4X (IP66)
NEMA 4X (IP66) aluminum w/polyester epoxy finish
ExplosionProof!
ExplosionProof!
Rugged, Stainless Steel OffshoreControl Products from ControlAir
ControlAir’s family of stainless steelprocess control devices utilize corrosion resistant stainless steelto provide longer life in offshoreand other harsh environments. Allare designed for high-performanceand accuracy while being in themost challenging environments. Regulators provide accurate pressure regulation and quickresponse; offered as filter service,high flow capacity, low tempera-ture and Autodrain. Our VolumeBoosters offer high flow capacityand are designed to increase thestroking speed of control valves.The Lock-Up Relay is a reliableunit for fail in place applications ofcontrol valves when air supplydrops below acceptable pressurelevels.
F E A T U R E SRegulators, FilterRegulators and Filters• 316 Stainless Steel Construction• NACE Compliant• 1/4” and 1/2” NPT Ports• Autodrain option• Low temperature option• High flow capacityVolume Boosters• 316 Stainless Steel Construction• 3/4” or 1” NPT Porting• Integral Adjustable bypass valve• High flow capacity• Soft valve seat design• High temperature option Lock up Relay• 304 Stainless Steel Construction• No leakage in lock-up position• Two pressure ranges available• Manual relief valve
Corrosion resistant, stainless steel construction for tough, offshore environments.Stainless Steel Regulators, Filters, Filter Regulators Stainless Steel,
High PressureRegulator
Stainless Steel Volume Boosters
Stainless Steel Lock-up Air Relay
TYPE 350SS TYPE 360SS TYPE 370SS TYPE 380/390SS TYPE 3600 TYPE 6000 TYPE 6600Output Ranges 0-30 psig (0-2.0 BAR) 0-30 psig (0-2.0 BAR) 0-30 psig (0-2.0 BAR) 0-125 psig (0-8.6 bar) 0-150 psig (0-15 BAR) 0-150 psig (0-15 BAR)
0-60 psig (0-4.0 BAR) 0-60 psig (0-4.0 BAR) N/A 0-60 psig (0-4.0 BAR) 0-150 psig (0-10.3 bar)0-100 psig (0-7.0 BAR) 0-100 psig (0-7.0 BAR) 0-100 psig (0-7.0 BAR) 0-225 psig (0-15.5 bar)0-150 psig (0-10.0 BAR) 0-150 psig (0-10.0 BAR) 0-150 psig (0-10.0 BAR)
0-200 psig (0-14.0 BAR)Maximum 290 psig (20.0 BAR) 290 psig (20.0 BAR) 150 psig (10.0 BAR) 290 psig (20.0 BAR) 6000 psig (413 bar) 150 psig (10.0 bar) 250 psig (17.0 BAR)Supply Pressure Autodrain: 150 psig (10.0 BAR) Autodrain: 150 psig (10.0 BAR) Autodrain: 150 psig (10.0 BAR)Maximum Flow 1/4" = 1.2 1/4" = 1.2 1/4" = 1.2 Type-380: 3/4": 9.0; 1”: 10.0 1/4" = 0.13 1/2" - Forward: 6.6 / Exhaust: 5.8 3/4": Forward: 8.0 / Exhaust: 8.0Coefficients (Cv) 1/2" = 3.3 1/2" = 3.3 1/2" = 3.3 Type-390: 3/4": 10.0; 1”: 11.0 3/4" - Forward: 6.8 / Exhaust: 5.8 1": Forward: 9.0 / Exhaust: 8.0Air Consumption 4 SCFH (2 nl/min) maximum 4 SCFH (2 nl/min) maximumOperating -20° to 185°F (-29° to 85°C) -40° to 200°F (-40° to 93°C) Type 3500: Standard: -40° to 160°F -40˚ to 200˚F (-40˚ to 93˚C)Termperature Autodrain Option: T350 and T370: 32° to 185°F (0° to 85°C) Autodrain: 32° to 200° (0° to 93°C) -70° to 225°F (-57° to 107°C) (-40° to 71°C) Low temperature option:
Low Temperature Option: -61° to 194°F (-52° to 90°C) Type 3600: EPDM Option: -40° to 230°F -62 to 194˚F (-52 to 90˚C)-40° to 225°F (-40° to 107°C) (-40° to 110°C)
Silicone Option: -60° to 230°F(-51° to 110°C)
Filter 25 micron 25 micron 40 micron 40 micronoptional 5 micron optional 5 micron
PortingInlet/Outlet 1/4" NPT or 1/2" NPT 1/4" NPT or 1/2" NPT 1/4" NPT or 1/2" NPT 3/4" NPT or 1" NPT 1/4" NPT 1/2" or 3/4" NPT 3/4" or 1" NPTGauge(s) 1/4" NPT 1/4" NPT 1/4" NPT 1/4" NPT 1/4" NPT 1/4" NPTExhaust 1/8" NPT 1/8" NPT 1/8" NPT 1/2" or 3/4" NPT 3/4" NPT
Signal Port: 1/4" NPT Signal Port: 1/4" NPTFeedback Port Option: 1/4" NPT
Weight 1/4" NPT: 2.2 lbs. (1.0 kg) 1/4" NPT: 2.0 lbs. (0.9 kg) 1/4" NPT: 2.1 lbs. (0.95 kg) Type 380: 16.6 lbs (7.5 kg) 3.25 lbs (1.5 kg) 11.7 lbs (5.3 kg) 15.0 lbs (6.80 kg)1/2" NPT: 2.8 lbs. (1.3 kg) 1/2" NPT: 2.6 lbs. (1.2 kg) 1/2" NPT: 2.5 lbs. (1.14 kg) Type 390: 14.5 lbs (6.6 kg)
Operating Media Air, inert gas, sweet (natural) and sour gases Air, inert gas, sweet (natural gas) Air, inert gas, sweet (natural) & sour gases
Flow Capacity 1/4" = 60 scfm 1/4" = 60 scfm 1/4" = 60 scfm Type 380-3/4" & 1": 425 scfm (Supply Pressure at 2000 psi) 300 scfm (8,490 NL/min) 3/4": 375 scfm (10,613 NL/min)1/2" = 160 scfm 1/2" = 160 scfm 1/2" = 160 scfm (12,027 NL/min) 75 psi outlet = 1900 scfm 1": 425 scfm (12,028 NL/min)
Type 390-3/4": 450 scfm 150 psi outlet = 3000 scfm(12,735 NL/min); 225 psi outlet = 4500 scfm1": 500 scfm (14,150 NL/min)
Maximum 150 psig (10.0 BAR) 150 psig (10.0 BAR)Signal PressureSignal to Output 1:1 1:1RatioDeadband Under 0.25 psig (0.017 bar) Under 0.2 psig (.01 BAR)
T Y P E 2 5 0Maximum 125 psig (8.35 BAR)Supply PressureCut-off 15-60 psig (1-4 BAR) Pressure Range 30-120 psig (2-8 BAR) Operating 0° to 160°F Temperatures (-18° to +71°C)Porting 1/4" NPTWeight: 4 lbs (1.8 kg)
CA_StainlessSteel_Brochure.qxp_5-18 7/25/18 12:44 PM Page 4
Type 6600 StainlessSteel Volume Booster• 316L Stainless SteelConstruction
• ¾" or 1" NPT Porting• Integral Adjustable BypassValve
• High Flow Capacity• Soft Valve Seat Design• High Temperature Operation• Tapped High Output ExhaustPort
• 2 Gauge Ports - Optional IEC 65108 SIL 3 Compliant
• Low Temperature Option
Type 6000 Stainless SteelVolume Booster• Fast Response• Adjustable Bypass Valve• Soft Seat Sealing• Corrosion and Wear Resistant• Choice of Porting
Type 380/390SS StainlessSteel Filter Regulators• 316L Stainless Steel Construction• High Flow Capacity• 3/4" or 1" NPT Porting• 2 Gauge Ports• Automatic Drain Option
Type 250 LockupAir Relay• Two Pressure RangesAvailable
• Manual Relief Valve• Corrosion-Resistant• 304 Stainless Steel• Mounting Bracket• No Leakage in Lock-upPosition
Type 350/360/370SSStainless SteelRegulators, Filters,Filter Regulators• 316 Stainless SteelConstruction
• NACE MR-0175Compliant
• 1/4" and 1/2" NPT Ports• Autodrain Option• Low Temperature Option• High Flow Capacity• Tapped Exhaust Port• Minimal Air Consumption
Type-3600 High Pressure Regulator• 316 Stainless Steel Construction• NACE MR-0175 Compliant• Choice of Three Output Pressures• Choice of Three Output Ports• Socket Head or Tee Handle Adjustment• Replaceable Valve Seat• High Maximum Inlet Pressure• Non-Relieving Design
P/N 441-625-066 6/5/18
8 Columbia Drive / Amherst, NH 03031 USAWebsite: www.controlair.comEmail: [email protected] FAX 603-889-1844An ISO 9001:2015 Registered Company
ControlAir’s line of stainless steel process control devices are packedwith features that make them ideal for off-shore applications.