preacher curl

19
Preacher curl plan - Free fitness equipment plan NOTE: The measurements within this text and 2D documentation are given both in millimeters and inches (in brackets). This website is based on ISO measurement unit system, which is the international standard. I apologize to the people who use other measurement units; but I believe that measurements given in millimeters and inches should be adequate for everyone who would like to build this project. Besides that, on today’s Internet it is easy to purchase the ruler containing all the measurement units and overcome the difficulties of any kind. Use various tools and clamps in process of welding, so you could weld the items together with accuracy. Make the components as given on drawings. Subassembly list

Upload: omikami

Post on 20-Oct-2015

64 views

Category:

Documents


3 download

DESCRIPTION

Preacher curl bench

TRANSCRIPT

Page 1: Preacher Curl

Preacher curl plan - Free fitness equipment plan

NOTE: The measurements within this text and 2D documentation are given both in millimeters and inches (in brackets). This website is based on ISO measurement unit system, which is the international standard. I apologize to the people who use other measurement units; but I believe that measurements given in millimeters and inches should be adequate for everyone who would like to build this project. Besides that, on today’s Internet it is easy to purchase the ruler containing all the measurement units and overcome the difficulties of any kind. Use various tools and clamps in process of welding, so you could weld the items together with accuracy. Make the components as given on drawings.

Subassembly list

Page 2: Preacher Curl

Preacher curl subassembly parts list

Page 3: Preacher Curl

Preacher curl subassembly drawing

Page 4: Preacher Curl

Frame components

Page 5: Preacher Curl

1.05 Square Tubing 50x50x4 Cut Length 610mm

1.08. Square Tubing 40x40x2_9 Cut Length 620mm

1.09 Declination sheet 1.10 Seat

Page 6: Preacher Curl

1.11 Sheet support 1.12 Triangle support

1.16 Pin D8mm 1.17 Dumbbell set holder

Page 7: Preacher Curl

1.18 Cover 50 x 50mm Standard parts

Weight set subassembly parts list

Page 8: Preacher Curl

Weight set subassembly drawing

2.01 Round tubing D31_8x6_3 Cut Length 1050mm 2.02 Delimiter

2.03 Dumbbell 5kg 2.04 Dumbbell nut

Page 9: Preacher Curl

2.05 Dumbbell 3kg 2.06 Dumbbell 1,5kg

1. PREACHER CURL SUBASSEMBLY - ASSEMBLAGE INSTRUCTIONS 1. Weld the Cover 50x50mm (Parts 18) to the Square Tubing 50x50x4 Cut Lenght 800,00mm (Part 3).

Page 10: Preacher Curl

2. Weld the Cover 50x50mm (Parts 18) to the Square Tubing 50x50x4 Cut Lenght 600,00mm (Part 2).

3. Weld the Square Tubing 50x50x4 Cut Lenght 790,00mm (Part 1) between subassemblies from step 1 and 2.

Page 11: Preacher Curl

4. Weld the Square Tubing 50x50x4 Cut Lenght 360,00mm (Parts 7) to the subassembly made in the previous step.

5. Weld the Dumbbell Set Holder (Parts 17) to the Square Tubing 50x50x4 Cut Lenght 360,00mm (Parts 7).

Page 12: Preacher Curl

6. Weld the Square Tubing 50x50x4 Cut Lenght 610,00mm (Part 5) to the assembly made in the previous step.

7. Weld the Square Tubing 50x50x4 Cut Lenght 435,00mm (Part 6) to the assembly made in the previous step.

Page 13: Preacher Curl

8. Weld the Square Tubing 50x50x4 Cut Lenght 410,00mm (Part 4) to the assembly from the previous picture. Chamfer the edges on places were the Parts are joining together by welding.

Page 14: Preacher Curl

9. Weld the Sheet Support (Part 11) and Triangle Support (Part 12) together.

Make the four of these subassemblies

10. Weld these four subassemblies to the subassembly made in step 8.

Page 15: Preacher Curl

11. Fasten the Seat (Part 10) to the assembly made in the previous step using standard parts: Slotted Pan Head Screw M5x30mm (Part 13), Spring Lock Washer (Part 14) and Hexagon Nut M5 (Part 15).

12. Weld the Declination Sheet (Part 9) and Square Tubing 40x40x2,9 Cut Lenght 420,00mm (Part 8) together

Page 16: Preacher Curl

13. Mount the subassembly from the previous step to the subaasembly from step 11 at the height of your choice using Pin D8mm (Part 16).

Page 17: Preacher Curl

2. WEIGHT SET SUBASSEMBLY - ASSEMBLAGE INSTRUCTIONS 1. Weld the Delimiter (Part 2) to the Round Tubing D31,8x6,3mm (Part 1).

2. Line up the dumbbells at the both ends of subassembly made in the previous step.

Page 18: Preacher Curl

3. Fix the dumbbells using Dumbbell Nut (Parts 5).

Page 19: Preacher Curl