pre-qualification uniflo co., ltd.uniflovalve.com/wp-content/uploads/2014/12/uniflo-pq_01.pdf ·...
TRANSCRIPT
UniFlo Co., Ltd Head Office & Plant 1 : 4Ma-319, Sihwa Industrial Complex #703-11, Songgok-dong, Danwon-gu, Ansan-si, Gyeonggi-do, Korea
Plant 2 : 21 Block 13Lot, Gangchon-ro, 139 Beon-gil 72, Danwon-gu, Ansan-si, Gyeonggi-do, Korea
Tel No : 82.31.498 .1577, Fax No : 82.31.498.1574 / Homepage : www.uniflovalve.com
UniFlo Co., Ltd.
Pre-Qualification
A leading company specializing in control & shut-off valves
2/64 Copyright ⓒ Uniflo Valve All rights reserved
1. Introduction
2. Quality & Environmental Policy
3. Company History
4. General Information
5. Production Control
6. Technical Control
7. Quality Control
8. Quality & Technical Conditions
9. Production Items
10. Certification & Registration
11. Photo Gallery
Customer Satisfaction.
1. Contents
3/64 Copyright ⓒ Uniflo Valve All rights reserved
We, UniFlo Co., Ltd (UNIFLO) was established in 1992 as a specialized manufacturer to produce all kinds of
control & shut-off valves using control process system,. Such as Gas Oil, Refinery, Chemical, Steel & Power
Plants.
UNIFLO is the leading company for its business products in Korea with its qualified equipment's, manpower and
technical capability to design, manufacture and test in spite of young company.
We will do our best to accumulate advanced control & shut-off valve engineering technologies, to reduce
production cost and improve quality assurance rules, such as ISO, API, CE,.etc
And also, Our goal is to give our customers the best product at a competitive price, delivered on time and with
the backing of a full service program.
We promise that we will meet the needs and expectations of our valuable customers through the control valve technology services and products of the highest quality.
In conclusion, UNIFLO guarantees that our honorable and potential customers all over the world should enjoy the
most reliable service by continuously technology development and quality fixation.
Thank you for your attention !
1. Introduction
4/64 Copyright ⓒ Uniflo Valve All rights reserved
1. Construct quality and environmental management system by ISO 9001/14001, PED-97/23/EC, API Q1-9
Edition, standard and prove reliability of product through continuous environment improvement and pollution
control, quality improvement.
2. Guarantee company's legal position through observance of quality and environmental regulation.
3. Forecast non-conformance that happen in all fields of our company and do preventive action and do all efforts
about customer complaint and correspond quickly.
4. Do to establish detailed enforcement methodology (Plan-Do-Check-Act) for the all process and strengthen&
improvement quality and environmental management system through review enforcement situation regularly.
5. Use energy and resources efficiently and control occurrence of environmental pollutant, and try actively in
recycling of available waste.
6. Exchange necessary information through communication system, and verify reliability quality and environment
management activity.
2. Quality & Environmental Policy
5/64 Copyright ⓒ Uniflo Valve All rights reserved
1992. 01. Established “ Sewoo Co. Ltd ” & Started Manufacture of Control Valve.
1997. 02. First developed “ nuflo 2-in-1 Control Globe & Butterfly Valve ”
International patents for “ nuflo Control Valve Design ”
1999. 06. Approved NT (New Technology) Mark by Korean Agency for Technology & Standards.
08. First developed “ High-temperature (870℃) Segment Ball Valve ”
2000. 02. First developed “ nuflo 2-in-1 Control Ball Valve ”
06. Award “ Excellent Technical Manufacturer ” by LG Chemical & POSCO .
2001. 04. Obtained Certification of Quality Assurance Management System ISO9001 by KISC .
2005. 04. 3 Units Patents for “ Pneumatic Valves, Valve device for fluid transfer ” & trademark “ nuflo ”
2009. 08. First developed “ Ultra Low-temperature (-196℃) Globe Control Valve ”
2009. 12. Contracted to OEM for Control Glove Valve with CURTISS WRIGHT (U.S.A) .
2010. 03. Moved to New Factory (Present Address) .
2010. 04. Approved API 607 Fire Safety Test for Ball Valve by KETC .
2010. 06. Obtained Certification of Components & Materials Special Company by Ministry of Economy .
2011. 05. Approved R&D Center by Korea Industrial Technology Association .
2012. 01. Changed to Company name “ UNIFLO Co., Ltd ”
2012. 03. Obtained Certification of Quality & Environment Management System ISO 14001 by KISC .
2012. 04. Renewed Certification of Quality Assurance Management System ISO 9001 by KISC .
2012. 04. Approved Technology Innovation INNO-BIZ & Venture(New Technology) Company by KIBO .
2012. 06. Listed as a Manufacturer of thermal & hydroelectric power plant at KOPEC (R Class) .
2014. 06. Approved ATEX (CE) for Control Valve by ICIM S.p. A
2014. 11. Approved API 607 Fire Safety Test for Butterfly Valve by TUV Nord .
2014. 11. Approved API 6D Monogram Certificate by API .
3. Company History
6/64 Copyright ⓒ Uniflo Valve All rights reserved
4. General Information
1. Company Features Company Name : UNIFLO Co., Ltd Established : In 1992 by Mr. Pil - Jae, Woo / President (30 years of business experience in Control valve market) 2. Head Office & 1st Plant
Address : 4 Ma-319, Sihwa Industrial Complex #703-11, Songgok-dong, Danwon-gu, Ansan-si,
Gyeonggi-do, Korea
Plant 2 : 21 Block 13Lot, Gangchon-ro, 139 Beon-gil 72, Danwon-gu, Ansan-si, Gyeonggi-do, Korea
Tel No : 82.31.498 .1577, Fax No : 82.31.498.1574 / Homepage : www.uniflovalve.com Contact Point : Mr. Sun Ku, Chung - Vice President / E-mail : [email protected] 3. Product Capacity Capital : USD 300,000 $ Annual Sales Amount : USD 6,500,000 $ Full Production Capacity : USD 20,000,000$ 4. Company Management Policy A leading Company Specializing in Control & Shut-off Valves 5. Quality Management Goal That is to give our customers the best product at a competitive price with high-quality, delivered on time
7/64 Copyright ⓒ Uniflo Valve All rights reserved
6. Company Organization Structure
4. General Information
President
Quality & Environmental Management Committee Managing Director
Management
Dep’t
Accounting
Purchase
Sales
Dep’t
Domestic
Overseas
Production
Dep’t
Machining
Assembly
Technical
Dep’t
Design
Development
Q/A
Dep’t
Q/C
lnspection
8/64 Copyright ⓒ Uniflo Valve All rights reserved
7. Employees
8. Experience & Technicians
9. Building & Acreage (m2)
Description Administration Sales Production Technical QA/QC Total
No of People 2 6 15 5 4 32
Factory Factory Building Ground Total
Head Office & Plant 1 1,590 m2 1,750 m2 (Third Floor ) 750 m2 4,090 m2
Plant 2 2.140 m2 1,980 m2 (Third Floor ) 990 m2 5,110 m2
Discipline Y<5 5<Y<10 10<Y Total
Mechanical 3 5 9 17
Electrical 1 1 2 4
Physical & Chemical - 1 1 2
QA/QC 1 2 1 4
Total 5 9 13 27
4. General Information
9/64 Copyright ⓒ Uniflo Valve All rights reserved
10. Main products range
UNIFLO Valves are designed by innovated engineers, and progressed through highly automated machining
by skillful specialist.
UNIFLO have tried our best to provided excellent quality and safety our customer, our products are
continually judged for compliance with International Standards Specification & Code and other quality
Standards.
No Valve
Type Type Class Size
Body & Trim
Materials
Service
Temperature Actuators Accessory
1 Control
Globe Globe & Angle
ANSI #150 ~
4,500
½”~24”
Carbon Steel
Stainless Steel
Special Alloy
-196 ~ 870℃
Pneumatic
Electronic
Hydraulic
Positioner
Air Filter
Booster
Regulator
Solenoid v/v
Limit Switch
Transmitter
2 Shut-Off
Ball
Side & Top Entry
Eccentric &
Segment ½”~48”
3 Shut-Off
Butterfly
Rubber Lined
High-Performance
Triple Offset
ANSI #150 ~ 600 1”~78”
4 Pressure
Regulator
Diaphragm
Piston ANSI #150 ~ 300
½”~6”
5 Pressure
Safety
Conventional
Bellows ½”~14”
6 Desuper-
Heater
MNSD, PRDS
Variable
ANSI #150 ~
1,500 2”~24”
7 Pneumatic
Actuator
Diaphragm
Cylinder 3~ 5 Bar ½”~100” -28 ~ 150℃ -
4. General Information
10/64 Copyright ⓒ Uniflo Valve All rights reserved
11. Production Activities & Scope of application
UNIFLO is specialized in the design, manufacturing and service of Control & Shut-off Valves that are used
for flow control as follows service area :
- Nuclear and Power Plant, Oil and Gas Plant, Chemical and Refinery, Petrochemical Plant.
- Steel and Iron Industry plant, Offshore and Shipbuilding, Cooling and Heating water System.
- Waste and Water treatment System, Pulp & Paper Industry Plant, Bio Technology Plant.
12. Service Capability
UNIFLO has a long specific experience on designing, erecting, commissioning and training of personnel on
the field of reducing and metering stations and of components for the Automatic Control System.
And available to provide technical advise & service, as well as several fields assistance all around the world.
13. Quality Management Approval
UNIFLO Valves were approved by the following institutes:
- API-Q1/6D : American petroleum Institute
- ATEX / CE : ICIM S.p. A / SZUTEST
- ISO 9001, 14001 : Korea International Standards Certification (KISC)
- R Class : Korea Power Engineering Co., ltd - Fire Safe Test : API 607 & 6FA, ISO 10957, BS 6755 Part 2 / BS 5351
4. General Information
11/64 Copyright ⓒ Uniflo Valve All rights reserved
14. After Service
UNIFLO A/S Team are fully trained & available to provide technical advise, documentation, spare parts
offers as well as field assistance all around the world.
15. Manufacturing Applicable Standards UNIFLO Valves are designed to confirm the following standards where applicable and not to limited any
request by customer.
- ISO (International Standards Organization)
- EN (European National Standards)
- ANSI (American National Standard Institute)
- API (American Petroleum Institute)
- ASTM (American Society for Testing and Materials)
- ASME (American Society Mechanical Engineers)
- BSI (British Standards Institute), DIN (Germany Standards)
- MSS (Manufacturers Standardization Society of the valve and fittings industry)
- SSPC (Steel Structure Painting Council) - NACE (National Association of Corrosion Engineers)
- AWWA (American Water and Wastewater Works Association)
- FCI (Fluid Control Institute, Inc)
- ISA (Instrument Society of America)
- KS (Korean Standards), JIS (Japan Industrial Standards)
4. General Information
12/64 Copyright ⓒ Uniflo Valve All rights reserved
1. Machining Process Purpose Assembly, computer operated machining ensures production of consistently high quality components to precision tolerances. All valve parts machined have been under the control of a comprehensive quality assurance system and details drawings. Especially, MCT & CNC machining work cells have been created in the machine shop to reduce the manufacturing time and improve the quality through decreasing employees involved and empower continual investment in manufacturing hardware such as the latest CNC machining equipment, research laboratories and testing facilities and ensures that UNIFLO products are the best available. UNIFLO is equipped with a state of the art and complete set of machines necessary to the complete in-house manufacturing of equipment in our range of production.
No Description Model Q’ty No Description Model Q’ty
1 CNC Lathe KT 35 4 10 Precision Lathe 200 x 2,000 2
2 M CT 1100 x 1100 2 11 Milling M/C HMT 1100N 2
3 Lathe 380 x 1800 4 12 Radial M/C BR-1.6 1
4 Compressor 30 Hp 2 13 Shooting Machine 1,000 x 1,000 1
5 Welding M/C Argon, 5.0kw 1 14 Polishing M/C 800 x 800 1
6 Welding M/C Arc 2 15 Air Dryer PADC-20 1
7 Marking M/C P5000 1 16 Hoist 10 Tons 4
8 Cutting M/C 1000 mm 1 17 Paint Booth 20HP 1
9 Tapping M/C Drilling M/C
STD-410 3 18 Hydraulic Wrench M/C 700Bar 2
5. Production Control
13/64 Copyright ⓒ Uniflo Valve All rights reserved
2. Characteristics of Product
UNIFLO’s Control valves are designed and manufactured for durability, long life cycle and maintenance
ease as follows:
- Double Free Operation : Heavy top-guiding ensures stable and optimized operation of the UNIFLO
Products throughout the entire stroking range.
The effects of unexpected system upsets or heavy vibration are minimized with
this construction.
- Reduced Noise Levels : The optional multi-hole low noise trim designs provide single-stage and
double stage noise attenuation benefits.
Potential noise reduction levels of up to 25dBA are possible, depending on the
specific operating conditions.
- Long Life-Cycle : Optional Anti-cavitation trim is also available in single stage and double-stage
configurations.
Proper control of dynamic cavitation conditions is extremely important for
continuous high performance and operation of control valves.
- Lower Cost : Dependable tight shutoff of a control valve minimizes loss of process fluids,
and can potentially eliminate the need for separate isolation valves.
The optional soft seat design, provides bubble-tight shutoff capabilities in
accordance with ANSI/FCI and IEC requirements.
VIII and IX.
5. Production Control
14/64 Copyright ⓒ Uniflo Valve All rights reserved
UNIFLO’s Shut-off valves are engineered & tested for long life service under million cycle.
- Lower torque : There is no frictional contact between Stem / Disc / Ball and Soft / Metal Seat, which
makes frictional almost close to zero, thus markedly reducing operation torque.
The upper and lower journal shaft bearing provide high compression strength and low
friction. So those UNIFLO Valve operations are very smooth and easy.
- Long life service : When the Stem/Disc/Ball contact the tapered face of the Soft/Metal Seat, a complete
seal is attained, which results in long life service.
3. Special Process
UNIFLO is special processing control with welding work on the metal Body & Parts of the product as follows.
- When found to any external defects, Casting shall be repaired by welding.
- When repair welding done after the casting has been heat treated, or when heat treatment is required by
the specification, the casting shall be re-heat treated.
- Whenever a defect is removed, the excavated areas shall be examined by Non- Destructive Testing
(NDT), such as Radiographic Test (R/T), Dye Penetrate testing (P/T), Magnetic Particle Testing (M/T)
and Ultrasonic Testing (U/T).
- All welding processes are in accordance with ASME VIII and IX are covered by relevant qualifications
- UNIFLO’s welding engineers can choose from a variety of carbon and stainless steel to apply to critical
item areas for the improves performance and extends valves life.
5. Production Control
15/64 Copyright ⓒ Uniflo Valve All rights reserved
1. Design Engineering
UNIFLO design engineers combine proven engineering expertise with state-of the art technology, including
computer aided design (2~3D Auto CAD) and Computational Fluid Dynamics(CFD) Program with finite
element analysis (Structure, Thermal, Fluid and Mobile), to refine existing designs and help develop new
products.
The minimum wall thickness of Valve bodies and other pressure containing parts, such as covers, extension
plates is in accordance with ANSI B 16.34 Table 3.
The pressure / temperature rating for the Valve is in accordance with the appropriate class which is ANSI
B16.5 or B 16.34 and dimensional for the face to face which is in accordance with ANSI B 16.10
All valves are designed to operate under the serve conditions in accordance with the following codes:
ISO-EN-ANSI-ASTM-ASME-API-BSI-DIN-MSS-SSPC-FCI-ISA-NACE-AWS-AWWA-KS-JIS
6. Technical Control
16/64 Copyright ⓒ Uniflo Valve All rights reserved
2. Materials Design
The information contained in this section is for reference purpose only and is not to be construed as
recommendation for service.
1) Shell parts
The pressure containing components, or shell, of UNIFLO Valves included the body and bonnet.
A variety of materials in compliance with API 6D, 602. 608, 609 & ASME/ANSI B 16.34 and ASME
materials specifications are used, the standard materials used for the shell are :
- Carbon Steel : A216Cr. WCB, LCB, A105, LF2,. etc
- Stainless Steel : A182 F304/304L/316/316L,. etc
- Alloy Steel : A217 WC6/9, C5/12/15,. etc
- Duplex : A743CK3MDU, CD-4MCU, F51
2) Stem / Cage / Ball / Disc parts
The standard metallic trim materials are available upon request
- Carbon Steel with Tungsten or Nickel thermal spray coating by the principles of Plazma
or Electro less Nickel plating
- Stainless Steel : A351 CF8/8M/3/3M, A276-316/304L/316L,.etc
- Duplex : A743CKMDU, CD-4MCU,F51,.etc
- Other materials, such as alloy 20, Titanium, Monel /Inconel, and Hastelloy,.etc
6. Technical Control
17/64 Copyright ⓒ Uniflo Valve All rights reserved
3) Seat and Packing parts
For detailed information on seat and packing materials, please contact UNIFLO Technical Department.
But usually, UNIFLO used to the following standard materials.
- Seat : Teflon, Nylon, Devlon, Peek, Carbon, / Stellite-21,
Metal with Tungsten or Nickel thermal spray by the principles of Plazma,.etc
- Packing : Teflon, Viton, EPDM, Graphite,. etc
4) Bolts and Nuts parts
Bolting materials used in UNIFLO Valves are in accordance with the requirement ASTM/ANSI B16.34
and ASME material standards.
5) Actuators
All kind of Actuators used in UNIFLO Valves are in accordance with the Clients requirements,
But usually, UNIFLO used to the following types.
- Multi Spring Diaphragm
- Liner Motion Cylinder / Rack & Pinion Cylinder
- Electric – Hydraulic / Multi Turn Electric / Quarter Turn Electric
- Accessary : Positioner, Air Filter, Booster, Regulator, Solenoid v/v, Limit Switch, Transmitter
6. Technical Control
18/64 Copyright ⓒ Uniflo Valve All rights reserved
1. QA/QC Management System UNIFLO’s Quality systems are integral to all operations, procurement, manufacturing administration, and product service functions are conducted within a comprehensive quality assurance system,. such as ISO 9001 & API Q1. CE ,. etc Especially, documentation control is a key component of UNIFLO’s overall quality system. The requirements of material certificate, testing, drawing and other essential data are clearly identified and provided with on time a basis.
UNIFLO Valves have been developed and are updated, and manufacturing benefits the customers with the
Quality Assurance & Control Planning to achieve the highest products quality.
7. Quality Cntrol
19/64 Copyright ⓒ Uniflo Valve All rights reserved
2. Inspection & Test UNIFLO is fully equipped with all necessary device to assure a perfect inspection of all part manufactured before shipment according to the customer’s specific requirement and special testing such as low temperature can also be performed and the equipment for inspections covers components and finished products both. Our inspection and test capabilities include but are not limited to, - Receiving Inspection for the Raw materials - Dimensional & Visual Inspection - Hydrostatic Test (Pneumatic or Hydrostatic) - Painting & Coating, Packing Inspection - Nondestructive Test of PT/RT/UT/MT as per customer specification - Certificate of Material Test Report (CMTR) - Positive Material Identification (PMI) - Certificate of Conformity (c of c) to the specified code and standards - Ultra High Temperature & Low temperature test if required
No Type Description Q’ty No Type Description Q’ty
1 Hydraulic Pressure Tester 50 ~ 1,000 mm 4 9 Actuator Tester 50 ~ 650 mm 2
2 Air Leakage Tester 50 ~ 1,000 mm 3 10 Cryogenic Tester ~ 1200mm 1
3 Repetition Tester 15 ~ 750 mm 2 11 Flow Capacity Tester ~ 350mm 1
4 Dial Gauge 0-300 mm 3 12 Thermometer AT-10 2
5 Venire Calipers 0 ~ 1,000 mm 16 13 RPM Tester 30V.3A 1
6 Ultra Thickness Gauge VA8041 2 14 Hydraulic Torque Wrench ~ 100 kg/m 3
7 Rockwell Hardness Tester SR-200 1 15 High Temperature Tester ~ 1200℃ 1
8 Multi Tester ATECK 434 2 16 Pitch Gauge 2P ~ 20P 2
7. Quality Control
20/64 Copyright ⓒ Uniflo Valve All rights reserved
3. Interaction of Quality Management System Processes
7. Quality Control
21/64 Copyright ⓒ Uniflo Valve All rights reserved
No Process Relevant Quality & Technical Spec UNIFLO Quality Procedure & Standards
1 QA/QC - ISO 9001 / 14001, API Q1 / 6D / 602/ 608/ 609
- CE Mark (PED 97/23/EC)
- Quality Assurance Manual (QAM -001)
- Procedure for Quality Assurance and Control (QP-A-101)
2 Material
(PMI)
- ISO 15156 / NACE MR 0175 (Sour Gas)
- ASTM Materials Spec / DIN 17175
- ASTM A 105 / 216 / 182 / 351
- ASTM A193-B7/A193M/194-2H /320 L7
- Procedure for Material Identification(QP-D-501)
- Procedure for Supplier control (QP-D-302)
- Procedure for Corrosion Environment control (QP-K-202)
- Working Std of Material purchase (WS-07)
- Working Std of Heat treatment (WS-10)
2-1 Bolting
- ASTM A193-B7/B8/A193M/194-2H/320 L7
- ASTM A307-B,/ASME/ANSI B18.2
- ISO 15156/ NACE MR 0175 (Sour Gas)
- Procedure for Purchase (QP-D-301)
- Working Std of Materials Purchase (WS-07)
- Working Std of Heat treatment (WS-10)
3 Design
- API 6D / 602 / 608 / 609, ISA S75-01/ FCI 70-2
- ASME/ANSI B 16.5 / 16.10 / 16.34
- BS 6755 Part 2 / ISO 10947 (Fire safety test)
- Procedure for Design and Development (QP-D-201)
- Procedure for Drawing control (QP-D-202)
- Working Std of Fire safety test (WS-11)
3-1 By Pass
- ASME/ANSI B 1.1 / 1.20/ 16.34
- ISO 228-1/2
- API 6D / 600
- Procedure for Design and Development(QP-D-201)
- Procedure for Production Controls (QP-D-502)
- Working Std of Material purchase (WS-07)
3-2 Actuation
Kind of
- ISO 5211
-Type (Electric/Pneumatic/Hydraulic)
- Procedure for Inspection and testing(QP-E-103)
- Procedure for Measuring and testing Equipment (QP-D-503)
- Working Std of Maintenance (WS-13)
4 Visual
- ANSI B 16.34 , 16.5
- MSS-SP-25,44, 55
- API 6D/ 602/ 608 / 609
- BS 1868
- Procedure for Material Identification (QP-D-501)
- Procedure for Inspection and testing (QP-E-103)
- Working Std of Marking (WS-08)
- Working Std of Coating (WS-06)
8. Quality & Technical Conditions
22/64 Copyright ⓒ Uniflo Valve All rights reserved
No Process Relevant Quality & Technical Spec UNIFLO Quality Procedure & Standards
4-1 Surface
Condition - SSPC-SP-10 - BS 1868(Coating)
- Procedure for Production Control (QP-D-502) - Working Std of Surface Treatment and Painting (WS-03)
5 Dimension - ASME/ANSI B16.34 / 16.10 - API 6D/602/608/609
- Procedure for Inspection and testing (QP-E-103) - Working Std of Machine (WS-06)
6 Testing
(Pressure)
- ISO 5208 / EN 1626 / BS 6364/ / KS B2821 - API 598 / 6D / 602/ 608 / 609 - ASME/ANSI B16.34 / B16.37 / B16.104 - FCI 70.2 / ISA S75.19 / IEC 60534-4
- Procedure for Inspection and testing (QP-E-103) - Working Std of Installation (WS-13) - Working Std of Pressure test (WS-01) - Working Std of Cryogenic test (WS-16)
7 Welding - AWS (WPS / PQR / WPQ) - ASME Sec IX-EN287/8 , ASME/ANSI B16.34 - API 6D / 602/ 608 / 609
- Procedure for Process Controls (QP-E-401) - Procedure for Production Controls (QP-D-502) - Working Std of Welding (WS-05)
8 NDE - ASME Sec V/ VIII Div 1 - ASME/ANSI B16.34 - ASTM E10 / 18 / 94 / 142 / 709
- Procedure for Production Controls (QP-D-502) - Procedure for Inspection and testing (QP-E-103) - Working Std of NDE (WS-04)
9 Certificate - ISO 9001 / 10474 / 10204 / 14000 - API Q1 / 6D / 602/ 608 / 609 / 607 - PEC 97/23/EC
- Procedure for Customer Satisfaction (QP-E-101) - Working Std of Packing and shipment (WS-09) - Certificate of Conformance (ISO 10204) - Declaration of Conformity (PEC 97/23/EC)
Remarks : 1. UNIFLO will guarantee the product against defects / damages in design, materials and workmanship for a period of one
(1) year after loading from UNIFLO warehouse.
2. UNIFLO will guarantee quality through UNIFLO QC and third party inspection before Shipping / Loading.
Note : QP - UNIFLO Quality Procedure / WS - UNIFLO Working Standards.
8. Quality & Technical Conditions
23/64 Copyright ⓒ Uniflo Valve All rights reserved
1. Control Globe Valve
UNIFLO Control Valves provided superior performance in demanding control and tight shut-off
process, and used for either throttle or on-off control of a wide variety of power plant, Gas & Oil,
Water, Steam,. etc. includes high flow capacity & pressure drops, low noise, reduced maintains.
9. Production Items
24/64 Copyright ⓒ Uniflo Valve All rights reserved
2. Control Globe Valve Trim
Trim Type : Single Port, Conventional Cage, Single Stage, Multi Stage, Disc Stack
Conventional Cage Pressure energized
seal
Single Stage Multi Hole, Low noise &Anti-
cavitation
Double Stage, High attenuation & Low noise
Multi-hole, Multi-stage intermediate Anti-cavitation Trim
Disk Stack Ass’y, Anti-cavitation, Low noise & High pressure drop
Trim
Multi-hole, Low noise & Anti-cavitation Trim with internal diffuser
9. Production Items
25/64 Copyright ⓒ Uniflo Valve All rights reserved
No Parts Description
1 Body
2 Bonnet
3 Body Stud
4 Body Nut
5 Plug
6 Seatring
7 Window Cage
7-1 Balance Cylinder
8 Stem
9 Plug-Stem
10 Spacer
11 Balance Ring
16 Bonnet Gasket
17 Seatring Gasket
18 Packing
20 Packing Follower Bolt
21 Packing Follower Nut
22 Packing Flange
23 Pakcing Follower
9. Production Items
3. Control Globe Valve Structure
UNIFLO Products incorporate the unique sealing & seating principle which is ideally suited for
difficult process application including high cycle & temperature, ultra-cryogenic, high abrasive media,
slurries ,.etc
26/64 Copyright ⓒ Uniflo Valve All rights reserved
9. Production Items
4. Control Angle Valve
The body designs of UNIFLO Angle Control have bolted bonnet, over sizing stem & yoke type and
also, trim designs have single port, conventional cage, single stage, multi stage type.
27/64 Copyright ⓒ Uniflo Valve All rights reserved
9. Production Items
5. Shut-off Butterfly Valve
UNIFLO Soft & double, triple-offset butterfly valve is high performance in a rotary valve package.
Its patented seating concept and adjustable travel actuator reduces dynamic unbalanced force and
permits even flow rate adjustments. UNIFLO’s new improved double design products easily meet
today’ most challenging special control process application.
28/64 Copyright ⓒ Uniflo Valve All rights reserved
9. Production Items
6. Shut-off Ball Valve
UNIFLO Soft & metal seated ball valve is flow conditioning technology and a unique ball arrangement.
UNIFLO ball valves owe their success and long life on the market a to favorable combination of design
with movable seat and performing characteristics and also, new improved double design products
easily meet today’ most challenging special control process application.
29/64 Copyright ⓒ Uniflo Valve All rights reserved
9. Production Items
7. nuflo Ball Valve (International Patents)
UNIFLO nuflo ball valve with movable seats design is specially designed to offer a solution in server.
Seat wear condition and having operational difficulty due to slurry accumulation between ball and seat.
When the ball is about to rotate to any position or in open position, the non-fixed seats are detached
from the ball surface by pneumatic control. The non-fixed seat moves toward the ball and tight shut to
ball surface when the ball is in closed position.
With this superior movable seats design, there will be no leakage due to excessive seat wear and
excellent sealing effect since the seats are tightened to ball be pneumatic pressure.
30/64 Copyright ⓒ Uniflo Valve All rights reserved
9. Production Items
8. nuflo Control Valve (International Patents)
UNIFLO nuflo control valve actuators built-in specifically with the body of the new concept is a very
compact product.
UNIFLO Valves owe their success and superior life on the market a to favorable combination of design
with low operation torque and performing characteristics with self cleaning seat and also, new improve
d double sealing design products easily meet today’ most challenging special control process application
such as slurry, tar fluid, corrosion & toxic fluid, gas & vacuum line (Max 740 mmHg).
31/64 Copyright ⓒ Uniflo Valve All rights reserved
9. Production Items
9. Desuper Heater Valve
UNIFLO has a complete line of desuper-heater designed to cool superheated steam efficiently, single
or multiple spray. steam atomizing, variable orifice, and a combined pressure reducing and desuper
heating station. One of the most efficient desuper-heaters is the multiple nozzle spray unit shown at
right along with the variable orifice desuper-heaters.
32/64 Copyright ⓒ Uniflo Valve All rights reserved
9. Production Items
10. Actuators
UNIFLO Actuator product is a pneumatic, spring-opposed diaphragm actuator operating from plant
air. Excellent long-term accuracy and reliability is achieved through the use of multiple springs in the
actuator.
The rugged one-piece yoke, the pressed steel diaphragm case and the special nylon reinforced
diaphragm provide dependable, high thrust performance. Additionally, the precision formed
diaphragm eliminates friction and reduces variations in the effective area during operation which, in
turn, results in exceptional linearity.
Five different sizes of the UNIFLO actuators an optional top or side-mounted manual override is
available on both direct and reverse actin with various accessories can virtually satisfy all application
requirements.
33/64 Copyright ⓒ Uniflo Valve All rights reserved
Date Title Item Description Register Certificate No
‘08. 02. 19 ISO 9001 The Quality Management System for
Control Globe, Ball, Butterfly Valves D A S 12Q11814
‘99. 04. 03 NT New Technology for Control Valves SMBA 1999-013
‘99. 11. 19 Trade Mark Nuflo Korea 40-0459034
‘03. 08. 29 Patent Pneumatic Valves, Valves device for
Fluid transfer Korea
10-0283593
/0397759
‘05. 05. 11 Patent Nuflo Control Valves & Design International 113182 / 207780
‘10. 02. 11 Venture Business New Technology Company KIBO 20110200702
‘11. 04. 07 INNO-BIZ Technology Innovation Company SMBA 110601-00488
‘11. 05. 23 R & D Center R&D for the Valves KOITA 2011110524
‘12. 03. 26 ISO 14001 The Environmental Management System
for Control Globe, Ball, Butterfly Valves IAF ESC2468
‘12. 03. 28 R Class Listed as a manufacturer & repair for
thermal & hydroelectric power plant
Korea
Power Co., Ltd A945
‘14. 07. 10 ATEX Control Globe Valves ICIM S.p.A 0425
‘14. 08. 10 CE Control & Shut-off Valves SZUTEST 2195
‘14. 11. 10 Fire Safety API 607 Fire Safety Test for Butterfly
Valve TUV Nord K8709/C14
‘14. 11. 11 API Q1/6D The Quality Management System for
Ball Valves API 6D-1483
10. Certification & Registration
1. Certification Status
34/64 Copyright ⓒ Uniflo Valve All rights reserved
10. Certification & Registration
2. API 6D Monogram
35/64 Copyright ⓒ Uniflo Valve All rights reserved
10. Certification & Registration
3. ISO 9001 Quality System / 14001 Environment System
36/64 Copyright ⓒ Uniflo Valve All rights reserved
10. Certification & Registration
4. API 607 Fire Safety Test
37/64 Copyright ⓒ Uniflo Valve All rights reserved
10. Certification & Registration
5. ATEX (Control Globe Valve) / CE (Industrial Valve)
38/64 Copyright ⓒ Uniflo Valve All rights reserved
10. Certification & Registration
6. Patents (nuflo Trade Mark / Ball Valve)
39/64 Copyright ⓒ Uniflo Valve All rights reserved
10. Certification & Registration
7. Patents (On-off Device for Liquid Process / On-off Device for Pneumatic)
40/64 Copyright ⓒ Uniflo Valve All rights reserved
10. Certification & Registration
8. International Patent (Actuator built-in Valve Body)
41/64 Copyright ⓒ Uniflo Valve All rights reserved
10. Certification & Registration
9. Venture (New Technology) / INNO-BIZ (Technology Innovation)
42/64 Copyright ⓒ Uniflo Valve All rights reserved
10. Certification & Registration
Clients Process Conditions Clients Process Conditions
Korea Power Plant Thermal & Hydroelectric
power plant POSCO Steel Power Plant, Gas, Steam
Korea Gas Corp Gas Plant Hyundai Steel Power Plant, Gas, Steam
Hyundai Eng & Cont’, Heavy
Industry, Motors,
Gas, Oil, Refinery,
Shipbuilding, Offshore Hanwha Chemical Chemical, Steam
Samsung C&T, Techwin,
Petro Chemical,
Chemical, Semiconductor,
Refinery, Gas, Oil, Steam Styro Lution Chemcal, Gas, Steam
SK Chemical, Industry,
Construction , Energy Chemical, Refinery, Gas, Oil Hyosung T&C, BASF Refinery, Gas, Oil, Steam
GS Construction, Power Refinery, Gas, Oil, Steam Dongyang Nylon Chemical
Doosan Heavy Industry Power Plant, Chemical, Steam OCI Chemical, Gas
Wolsung Nuclear Power Plant Nuclear Power Plant Daelim Eng, Industry Power Plant, Oil
LG Chemical, Micronics,
Phillips, Eng,
Chemical, Semiconductor,
Refinery, Oil, Steam China Petro Chemical (China) Gas, Oil, Refinery
Lotte Chemical Chemical, Refinery, Steam B A S F (Germany) Chemical, Steam
S - Oil Refinery, Gas, Oil, Steam KOPECS (Korea) OEM supply
Daewoo Construction Refinery, Gas, Oil, Steam MOTOYAMA (Japan) OEM supply
Hyundai Oil Bank Refinery, Gas, Oil, Steam CURTISS WRIGHT (USA) OEM supply
10. Major Client List
43/64 Copyright ⓒ Uniflo Valve All rights reserved
11. Photo Gallery
1. Control Globe Valves
44/64 Copyright ⓒ Uniflo Valve All rights reserved
11. Photo Gallery
1-1. Control Globe Valves
45/64 Copyright ⓒ Uniflo Valve All rights reserved
11. Photo Gallery
1-2. Control Globe Valves
46/64 Copyright ⓒ Uniflo Valve All rights reserved
11. Photo Gallery
1-3. Control Globe Valves
47/64 Copyright ⓒ Uniflo Valve All rights reserved
11. Photo Gallery
1-4. Control Globe Valves
48/64 Copyright ⓒ Uniflo Valve All rights reserved
11. Photo Gallery
2. Shut-off Ball Valves
49/64 Copyright ⓒ Uniflo Valve All rights reserved
11. Photo Gallery
2-1. Shut-off Ball Valves
50/64 Copyright ⓒ Uniflo Valve All rights reserved
11. Photo Gallery
2-2. Shut-off Ball Valves
51/64 Copyright ⓒ Uniflo Valve All rights reserved
11. Photo Gallery
2-3. Shut-off Ball Valves
52/64 Copyright ⓒ Uniflo Valve All rights reserved
11. Photo Gallery
3. Shut-off Butterfly Valves
53/64 Copyright ⓒ Uniflo Valve All rights reserved
11. Photo Gallery
3-1 Shut-off Butterfly Valves
54/64 Copyright ⓒ Uniflo Valve All rights reserved
11. Photo Gallery
4. Desuper Heater Valves
55/64 Copyright ⓒ Uniflo Valve All rights reserved
11. Photo Gallery
4-1. Desuper Heater Valves
56/64 Copyright ⓒ Uniflo Valve All rights reserved
11. Photo Gallery
5. Actuators
57/64 Copyright ⓒ Uniflo Valve All rights reserved
11. Photo Gallery
6. Valves Installation Status
58/64 Copyright ⓒ Uniflo Valve All rights reserved
We, UNIFLO will do our best for the customer’s satisfaction as a leading company of the control valve.
Thanks very much for your kind attention.
Thanks