Fire Systems SLC Loop Devices

References:

Document 51253 SLC Wiring

Document 15378 Device Compatibility

Datasheets

SLC Loop Devices

A Signaling Line Circuit can contain a variety of devices, each with a specific function to perform.

Intelligent Detectors to identify a variety of threat conditions various smoke levels, heat, etc.

Addressable Modules to interface the system to conventional input/output circuits and devices notification appliances, smoke detectors, waterflow and supervisory devices, etc.

Addressable Pull Stations for manual alarm activation. These devices actually contain an Addressable Module inside.

Loop Isolators to prevent total loop failure from a SLC short.

Communication Protocols

CLIP Classic Loop Interface Protocol

Polls devices one at a time in serial order. Limited to 99 detectors and 99 modules per SLC

Loop. Compatible with NFS640 NFS2-640 and NFS2-

3030. Solid Technologybut slow. Retrofit solution.

Communication Protocols

FlashScanTM

Complete product line.

Permits the largest number of devices per loop in the industry (159 detectors/159 modules).

Response times offers advanced detection options

Faster polling and response time - exceed worldwide code requirements (< 3 sec ).

Isolator Application Style 4 Riser Classe B

Isolator Application Style 6 Classe A

Isolator Application Style 7 Classe A

FSI-851 Inico

FSP- 851 Fotoeltrico

FST-851 Temperatura fixa (57oC / 135oF)

FST-851R Termovelocimtrico (8,3oC / min) e Temp. Fixa

FST-851H Temperatura fixa alta (90oC / 195oF)

FAPT-851 Acclimate fotoeltrico / trmico

FSL-751 Fotoeltrico a Laser

FSC-851 Multi-critrio IntelliQuad

FSB-200 Beam (tipo feixe)

FSB-200S Beam (tipo feixe) c/ auto-teste

Detectores FlashScan: Tipos disponveis

Acionador Manual enderevel

Chave resetvel

Dupla ao (aperte e puxe)

Pode ser aberto sem causar

uma condio de alarme!

LED indicador bicolor

Verde: normal / Vermelho:

alarme

Visualizao pelo atuador

frontal transparente.

NBG12LXP: Acionador Manual FlashScan

Mdulos de entrada Mdulos monitores

Simples

Duplos

Mini-mdulos

Mdulo de zona convencional Detectores convencionais

Mdulos entrada 4-20mA

Compatvel com sensores industriais em geral:

temperatura, presso, concentrao de gases,

etc.

Mdulos de sada Mdulos de controle

Incluem Superviso

Alimentao 24V

Mdulos para aplicaes de combate

Fiao para solenides classe A/B

supervisionada

Listados UL/FM

Protocolo redundante

Mdulos de sada rel

Permitem comando de desligamento de

equipamentos (ex. Recolhimento de

elevadores)

Mdulos de entradas e sadas Mdulos FDRM-1

2 entradas supervisionadas

2 sadas de rel (NA/NF)

Menor custo de instalao

Mdulos isoladores Mdulos ISO-X

Protege contra curto-circuitos

At 200 mdulos por lao, sem

perda de capacidade

Mximo 25 dispositivos entre

isoladores (20 pela ABNT)

XP10-M Ten Class B or five Class A Initiating Device Circuits for normally open alarm contact devices.

XP6-MA Six Class B or three Class A Initiating Device Circuits for monitoring UL Listed two-wire smoke detectors (requires filtered, resettable 24 volts).

Mounts in BB-XP backboxes two modules, surface mount. Mount up to six modules on a CHS-6 chassis.

Addressable Input Modules

XP6-MA

BB-XP

XP6-C Transponder Control Module. six Notification Appliance Circuits, Class A or B.

SYNC-1 Synchronization daughter module for XP6-C using System Sensor appliances.

XP6-R Transponder Relay Module. Six Form-C Dry Contact Relays.

Mounts in BB-XP backboxes two modules, surface mount. Mount up to six modules on a CHS-6 chassis.

Addressable Output Modules

XP6-C

CHS-6 Chassis

Multi-Circuit Module Mounting Options

BB-25 (Black) / BB-6 (Red)

Mounts up to 6 XP Multi-Mods

BB-XP (Black) / BB-2 (Red) Mounts up to two Multi-Mods

Mounts in a standard CAB-4 Series enclosure using up to 1-4 CHS-6 chassis for a total of 24 Multi-Mods.

CAB-4 Series Enclosure with CHS-6 Chassis

Multi-Circuit Module Mounting Options

Base sonora B200S

Ativa a sirene quando o detector ligado a ela ativado

Pode ser ativada remotamente pela central

Padro Temporal 3 e Temporal 4

Sincroniza com os dispositivos AV da System Sensor

Necessita alimentao 24VDC externa

Diversos modelos:

P2R udio/visual

SR somente strobe

HR somente sirene

Opes a prova de tempo

NEMA 4X/IP56

Sinalizador e placa de montagem

Intensidade ajustvel

Montagem simples

Sinalizadores SpectrAlert Advance