ppu: 960 physics practical report format sample
TRANSCRIPT
Physics Practical Report Format:
To facilitate assessment by the teacher, it is suggested that the
practical work report should consist of the structures below.
a. Topic
b. Title
c. Objective
d. Theory
e. Apparatus
f. Procedure
g. Observations and measurements
h. Processing and analysis of data
i. Discussion
j. Conclusion
*(g) and (h) can be combined as 'Observation and analysis of data'.
Marks given are based on:
a. Practical skills → 3 marks b. Observations and measurements → 4 marks c. Processing and analysis of data→ 4 marks d. Discussion and conclusion → 3 marks e. General → 1 mark
TOTAL: 15 marks
SAMPLE REPORT
Topic: Kinematics
Title: Projectile
Objective: To study the trajectory of an object subjected to the gravitational acceleration.
Theory:
When an object is projected at an initial velocity at an angle to the horizontal, the position
of the object at some later time t can be specified by two equations.
Apparatus:
i. A 1.0 m aluminum V-track
ii. A target board (30 cm x 100 cm)
iii. Steel ball bearing (about 1 cm)
iv. Carbon paper / Carbonised printing paper
v. A metre rule
vi. Retort stand
Procedure:
Observation & data Analysis:
TABLE …
Graph
Discussion: [SELF creation]
1. If the ball bearing is place at the ending on the V track, will it be strike the wall of distance
?
ANS: NO, because the ball bearing cannot produce fast movement velocity and it have short
eject time to reach the borad.
2. If a projectile moment of a ball bearing can be calculated, how about this happened in space?
Will it be the same?
ANS: Yes, because the calculation we done is neglect the air resistance, everything is due to
constant acceleration which is gravitational pull.
Conclusion:
In the study of trajectory of an object subjected to the gravitational acceleration is proven by the
theory proposed above. Hence, the theory is accepted. It only can be applied in VACUUM physics.
*** NOTES: STPM Physics = VACUUM Physics.