[ppt]introduction to dftb+ in material studio 6.0 · web viewdftb why dftb? basic theory dftb...
TRANSCRIPT
![Page 1: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/1.jpg)
Introduction to DFTB+
Martin Persson
Accelrys, Cambridge
![Page 2: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/2.jpg)
• DFTB– Why DFTB?– Basic theory DFTB– Performance
• DFTB+ in Materials Studio– Energy, Geometry, Dynamics, Parameterization– Parameterization• Basic theory• Setting up a parameterization
Outline
![Page 3: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/3.jpg)
Why DFTB+
![Page 4: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/4.jpg)
• DFT codes are good for small systems • Nano structures and bio molecules are often too large for
DFT but their electronic properties are still of interest– hence quantum mechanical description is needed.
• Classical force field based codes can handle large systems but are missing the QM part
• Empirical TB has been applied to systems up to a few million atoms– No charge self consistency– Limited transferability– Using simplified energetic expressions
QM vs. CM
![Page 5: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/5.jpg)
• DFTB merges the reliability of DFT with the computational efficiency of TB – Parameters are based on an atomic basis– The parameters can be made transferable– Charge self consistent– Describes both electronic as well as energetic
properties– Can handle thousands of atoms
This is where DFTB+ comes in
![Page 6: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/6.jpg)
Examples of what can be done with DFTB+
Diamond nucleation Novel SiCN ceramics Si cluster growth
Magnetic Fe clusters WS2 nanotubes
![Page 7: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/7.jpg)
Basic DFTB Theory
![Page 8: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/8.jpg)
• DFTB– Pseudo atomic orbital basis– Non SCC Hamiltonian elements are parameterized– 2nd order charge self consistent theory– Charges are treated as Mulliken charges– Short range potential is used to correct the
energetics – Hamiltonian matrix is sparse and can partly be
treated with O(N) methods
DFTB theory in short
![Page 9: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/9.jpg)
• Minimal basis set • Pseudo atomic orbitals– Slater orbitals– Spherical harmonics
DFTB basis set
vv
vv
v
mlnml
rnlnv r
rerar,,,
![Page 10: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/10.jpg)
Pseudo atomic orbitals
S P1 P2 P3
D5D4D3D2D1
Silicon sp3d5 orbitals
For Silicon the d-orbitals are un-occupied but needed to properly model the conduction band.
![Page 11: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/11.jpg)
Hamiltonian elements
otherwise
if if
0
atom free
0 BAVVTH BBA
A
• Diagonal elements use free atom energies
• Two centre integrals• Tabulated values
![Page 12: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/12.jpg)
1. Expand the Kohn-Sham total energy expression of DFT to 2nd order in terms of electron and magnetization density fluctuations
2. Represent the Hamiltonian elements in a minimal basis of pseudo-atomic orbitals
3. Express the charge density in terms of Mulliken charges4. Expand the magnetization density in terms of non-overlapping
spherically symmetric functions5. Replace the remaining terms with a short range repulsive energy
DFT DFTB
N
xc
occ
iiiitot
RRZZ
nE
rrrdrnvnE
21,
)(21
2,
32
![Page 13: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/13.jpg)
1. Expand the Kohn-Sham total energy expression of DFT to 2nd order in terms of electron and magnetization density fluctuations
2. Represent the Hamiltonian elements in a minimal basis of pseudo-atomic orbitals
3. Express the charge density in terms of Mulliken charges4. Expand the magnetization density in terms of non-overlapping
spherically symmetric functions5. Replace the remaining terms with a short range repulsive energy
DFT DFTB
rrddrrnnrdnnV
RRZZ
nErrddE
rrddnnnnE
rr
nVrrrdnvnE
xc
N
xcnxc
nxc
occ
iixciitot
3300300
033
0,
2
330,
2
,0
32
210,
210,|
21
|121
0,21
2
0
0
nnn 0
0
![Page 14: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/14.jpg)
1. Expand the Kohn-Sham total energy expression of DFT to 2nd order in terms of electron and magnetization density fluctuations
2. Represent the Hamiltonian elements in a minimal basis of pseudo-atomic orbitals
3. Express the charge density in terms of Mulliken charges4. Expand the magnetization density in terms of non-overlapping
spherically symmetric functions5. Replace the remaining terms with a short range repulsive energy
DFT DFTB
rrddrrnnrdnnV
RRZZ
nEWpp
HccnE
xc
N
xc
N
l lllll
occ
iiiitot
3300300
0
,
0
210,
210,
21
21
![Page 15: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/15.jpg)
1. Expand the Kohn-Sham total energy expression of DFT to 2nd order in terms of electron and magnetization density fluctuations
2. Represent the Hamiltonian elements in a minimal basis of pseudo-atomic orbitals
3. Express the charge density in terms of Mulliken charges4. Expand the magnetization density in terms of non-overlapping
spherically symmetric functions5. Replace the remaining terms with a short range repulsive energy
DFT DFTB
rep
N
l lllll
occ
iiiitot
EWpp
HccnE
21
21
,
0
![Page 16: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/16.jpg)
DFTB+ Performance
![Page 17: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/17.jpg)
Performance figures
N2.9
N1.5
•10x10 CNT• 32 atoms/unitcell• Run on single core• Intel(R) Xeon(TM) CPU 3.00GHz
•Small systems (<300 atoms) O(N) processes dominate•Large systems (>300) O(n) eigenvalue solver dominates•Around 100 times faster then normal DFT
![Page 18: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/18.jpg)
DFTB+ in Materials Studio 6.0
![Page 19: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/19.jpg)
• First official release that includes the DFTB+ module
• Supported tasks– Energy– Geometry optimization– Dynamics– Parameterization
• Also support– Dispersion correction– Spin unrestricted calculations
DFTB+ in Materials Studio 6.0
![Page 20: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/20.jpg)
• Slater-Koster libraries instead of DFT Functionals– CH, CHNO and SiGeH
• What if I don’t have the needed library?– Download academic
libraries at www.dftb.org• mio, C-H-N-O-S-P• pbc, Si-F-O-N-H|Fe• matsci, various parameters
– Make your own
Starting a DFTB+ job
![Page 21: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/21.jpg)
• Need to register to get access.• The downloaded parameters will
contain many different Slater Koster files
Downloading parameters
•To be used in MS-DFTB+ the parameters need to be packed up in a .skflib format.• The .skflib file is just a tagged concatenation of the different files
• [Begin section] [End section], surrounds list of all files• [Begin file <filename>] [End file <filename>], surrounds content of file.
• Will prevent accidental mixing of files between libraries and makes handling easier
![Page 22: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/22.jpg)
• Band structure• Density of states• Electron density• Fermi surface• Orbitals• Slater-Koster parameters• Dynamics analysis is done
using the Forcite analysis tools
DFTB+ Analysis
![Page 23: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/23.jpg)
Materials Studio 6.0 Parameterization tool
![Page 24: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/24.jpg)
• DFTB+ depends on parameters– Hamiltonian and overlap integrals– Hubbard terms (orbital resolved)– Spin constants– Wave function coefficients– Short range repulsive potential
The DFTB+ Parameterization Tool
The DFTB+ parameterization tool enables you to make your own parameterizations. It calculates all of the needed parameters. The result is packed up in a single file (.skflib)
![Page 25: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/25.jpg)
Repulsive fitting
rep
N
l lllll
occ
iiiitot
EWpp
HccnE
21
21
,
0
pairs
jiijijtype
totbareDFTB
totDFTrep rUEEE )()(,
The remaining terms, Erep, will be described using fitted repulsive pair potentials.
The pair potentials are fitted against a basis of cutoff polynomials
otherwiserr if
0)(
)( cutoffn
cutoffn
rrrf
Pair potentials
![Page 26: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/26.jpg)
• Short range pair potentials are fitted against small molecules or solids• Path generators
– Stretch, Perturb, Scale, Trajectory• Fitting against Energy and optionally forces• Use of spin unrestricted calculations• Steps, weights and width are set under Details...
Systems
![Page 27: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/27.jpg)
Bond order fitting
Use weight distributions to combine several bond orders into a single potential fit
![Page 28: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/28.jpg)
• C-H.txt- Job summary• Best fit (C-H.skflib)
returned in the base folder• Fits for alternative cutoff
factors are returned in the Alternatives folder
Parameterization job results
![Page 29: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/29.jpg)
Evaluating the result
benzene-------DMol3 C3-C2 = 1.39838 C3-H9 = 1.09097 DFTB+ C3-C2 = 1.41171 C3-H9 = 1.10386 Diff C3-C2 = 0.01333 C3-H9 = 0.01289
DMol3 C2-C7-C6 = 120.00000 H12-C7-C6 = 120.00000 DFTB+ C2-C7-C6 = 119.99783 H12-C7-C6 = 120.00930 Diff C2-C7-C6 = -0.00217 H12-C7-C6 = 0.00930
Atomization Diff = -111.42032==============================================
ethene------DMol3 C2-C1 = 1.33543 C2-H5 = 1.09169 DFTB+ C2-C1 = 1.33114 C2-H5 = 1.09898 Diff C2-C1 = -0.00429 C2-H5 = 0.00729
DMol3 C1-C2-H6 = 121.65149 H4-C1-H3 = 116.69702 DFTB+ C1-C2-H6 = 121.55765 H4-C1-H3 = 116.88453 Diff C1-C2-H6 = -0.09384 H4-C1-H3 = 0.18751
Atomization Diff = -48.44673==============================================
Bond Error Statistics:C-C = 8.81072e-03C-H = 1.00915e-02=================Total Average = 9.45112e-03
Angle Error Statistics:HCH = 1.87511e-01CCC = 2.16738e-03HCC = 5.15662e-02=================Total Average = 7.32028e-02
1. Initial evaluation against small set of structures
2. Final evaluation against larger set of structures
3. Validation against larger structures
Materials Studio supplies a MS Perl script which compares geometry and atomization energy for structures.
![Page 30: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/30.jpg)
• sp3d5 basis• LDA(PWC)• Fitted against
– Si, Ge and SiGe solids– Si2H6, Si2H4
– Ge2H6, Ge2H4
– SiGeH6, SiGeH4
– SiH4, GeH4 and H2
• Tested against:– Solids– Nanowires– Nanoclusters– Si vacancy
SiGeH
NNf ENNEE 1
1
Si vacancy Formation energy
Ef(eV)
DFTB+ 2.6
DMol3 2.7
![Page 31: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/31.jpg)
• sp3 basis• GGA(PBE)• Tested against a large set
(~60) of organic molecules• Also, validated against a
smaller set of larger molecules
• Good diamond cell parameter, 3.590 (3.544) Å
CHNO
Bond type Average difference (Å)C-C 0.0108
C-N 0.0131
C-O 0.0105
C-H 0.0081
N-N 0.0070
N-O 0.0123
N-H 0.0087
Average bond difference: 0.0096 Å
Average angle difference: 1.16 degrees
Accuracy is comparative to that of the Mio library.
![Page 32: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/32.jpg)
• Successfully tested for:– CNT– C60
– Caffeine– Glucose– Porphine– N-Acetylneuraminic
acid
CHNO: Larger molecules
Bond Diff (Å)C-C 0.0095C-N 0.0075C-O 0.0078C-H 0.0028
Bond Diff (Å)C-C 0.005
Bond Diff (Å)C-C 0.0148C-N 0.0118C-O 0.0100C-H 0.0114N-H 0.0127O-H 0.0019
CNT-6x6
Caffeine
N-AA
![Page 33: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/33.jpg)
Thanks for your attention
Other contributors:Paddy Bennett (Cambridge, Accelrys)
Bálint Aradi (Bremen, CCMS) Zoltan Bodrog (Bremen, CCMS)
![Page 34: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/34.jpg)
• The Kohn-Sham equation is solved for a single atom.
• Using an added extra confining potential to better model molecules and solids
Generating the orbitals
)()()(ˆ2
0
rrrrrVT at
eff
![Page 35: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/35.jpg)
1. Expand the Kohn-Sham total energy expression of DFT to 2nd order in terms of electron and magnetization density fluctuations
2. Represent the Hamiltonian elements in a minimal basis of pseudo-atomic orbitals
3. Express the charge density in terms of Mulliken charges4. Expand the magnetization density in terms of non-overlapping
spherically symmetric functions5. Replace the remaining terms with a short range repulsive energy
DFT DFTB
N
xc
occ
iiiitot
RRZZ
nE
rrrdrnvnE
21,
)(21
2,
32
![Page 36: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/36.jpg)
1. Expand the Kohn-Sham total energy expression of DFT to 2nd order in terms of electron and magnetization density fluctuations
2. Represent the Hamiltonian elements in a minimal basis of pseudo-atomic orbitals
3. Express the charge density in terms of Mulliken charges4. Expand the magnetization density in terms of non-overlapping
spherically symmetric functions5. Replace the remaining terms with a short range repulsive energy
DFT DFTB
rrddrrnnrdnnV
RRZZ
nErrddE
rrddnnnnE
rr
nVrrrdnvnE
xc
N
xcnxc
nxc
occ
iixciitot
3300300
033
0,
2
330,
2
,0
32
210,
210,|
21
|121
0,21
2
0
0
nnn 0
0
![Page 37: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/37.jpg)
rrddrrnnrdnnV
RRZZ
nErrddE
rrddnnnnE
rr
HccnE
xc
N
xcnxc
nxc
occ
iiiitot
3300300
033
0,
2
330,
2
,
0*
210,
210,|
21
|121
0
0
1. Expand the Kohn-Sham total energy expression of DFT to 2nd order in terms of electron and magnetization density fluctuations
2. Represent the Hamiltonian elements in a minimal basis of pseudo-atomic orbitals
3. Express the charge density in terms of Mulliken charges4. Expand the magnetization density in terms of non-overlapping
spherically symmetric functions5. Replace the remaining terms with a short range repulsive energy
DFT DFTB
ii HH 00 ˆ
ii c
![Page 38: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/38.jpg)
1. Expand the Kohn-Sham total energy expression of DFT to 2nd order in terms of electron and magnetization density fluctuations
2. Represent the Hamiltonian elements in a minimal basis of pseudo-atomic orbitals
3. Express the charge density in terms of Mulliken charges4. Expand the magnetization density in terms of non-overlapping
spherically symmetric functions5. Replace the remaining terms with a short range repulsive energy
DFT DFTB
rrrrnnrnnV
RRZZ
nErrE
HccnE
xc
N
xcnxc
occ
iiiitot
3300300
033
0,
2
,
0
210,
210,|
21
21
0
βα βα
interacion Coulomb UHubbard
a
nn
0 qqq
![Page 39: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/39.jpg)
1. Expand the Kohn-Sham total energy expression of DFT to 2nd order in terms of electron and magnetization density fluctuations
2. Represent the Hamiltonian elements in a minimal basis of pseudo-atomic orbitals
3. Express the charge density in terms of Mulliken charges4. Expand the magnetization density in terms of non-overlapping
spherically symmetric functions5. Replace the remaining terms with a short range repulsive energy
DFT DFTB
rrddrrnnrdnnV
RRZZ
nEWpp
HccnE
xc
N
xc
N
l lllll
occ
iiiitot
3300300
0
,
0
210,
210,
21
21
llal ppp
ninteractiospin llW
![Page 40: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/40.jpg)
1. Expand the Kohn-Sham total energy expression of DFT to 2nd order in terms of electron and magnetization density fluctuations
2. Represent the Hamiltonian elements in a minimal basis of pseudo-atomic orbitals
3. Express the charge density in terms of Mulliken charges4. Expand the magnetization density in terms of non-overlapping
spherically symmetric functions5. Replace the remaining terms with a short range repulsive energy
DFT DFTB
rep
N
l lllll
occ
iiiitot
EWpp
HccnE
21
21
,
0
![Page 41: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/41.jpg)
• Most of DFTB+ is running with O(N) routines • Two exceptions – DFTB+ SCC
• Ewald-summation, O(N2)– DFTB+ eigenvalue solvers
• LAPACK solvers, O(N3)
• Small systems (<300 atoms), the O(N) processes dominate
• Large systems (>300), the eigenvalue solver dominates
Calculation time vs. structure size
![Page 42: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/42.jpg)
Performance figures
N2.9
N1.5
•10x10 CNT• 32 atoms/unitcell• Run on single core• Intel(R) Xeon(TM) CPU 3.00GHz
•Small systems (<300 atoms) O(N) processes dominate•Large systems (>300) eigenvalue solver dominates
#cpu Speedup Efficiency
1 1.0
2 0.87
3 0.80
4 0.72
OpenMP
![Page 43: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/43.jpg)
• DFTB+ is significantly faster than a normal DFT code• Depending on what DFT code we compare to its a factor 102-103 faster• DFTB+ compared to DMol3 is a factor of 30-80 faster
DMol3 vs. DFTB+
Atoms TimeDFTB+(s) TimeDMol3(s) TimeDMol3/TimeDFTB+
32 4 233 58
64 8 632 79
96 17 872 51
128 26 1092 42
160 46 1501 33
![Page 44: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/44.jpg)
Starting a DFTB+ job: Setup
• Available tasks• Energy• Geometry optimization• Dynamics• Parameterization
• Dispersion correction• Spin unrestricted
The parameterization dialogs are accessed through the More... Button.
![Page 45: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/45.jpg)
• Select Slater-Koster library– CH, CHNO and SiGeH– Use Browse... to access local
library• What if I don’t have the
needed library?– Download academic libraries at
www.dftb.org• mio, C-H-N-O-S-P• pbc, Si-F-O-N-H|Fe• matsci, various parameters
– Make your own
Starting a DFTB+ job: Electronic
![Page 46: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/46.jpg)
• Select any properties that should be calculated– Band structure– DOS– Electron density– Orbitals– Population analysis
• Properties will be calculated at the end of the job
Starting a DFTB+ job: Properties
![Page 47: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/47.jpg)
• Select server or run on local machine
• DFTB+ support OpenMP but not MPI
• On a cluster it will run on the cores available to it on the first node
• Parameterization is always run as a serial job
Starting a DFTB+ job: Job Control
![Page 48: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/48.jpg)
• The DFTB+ calculations are run by Materials Studio as an energy server
• Geometry optimization and Dynamics jobs are controlled by the same code that is used during a Forcite job
During a DFTB+ job
![Page 49: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/49.jpg)
• <>.xsd– Final structure
• <>.xtd (dynamics)– Dynamics trajectory
• <>.txt – Compilation of the results
• <>.dftb– The last output from DFTB+
• <>.skflib (parameterization)– Slater-Koster library
DFTB+ Result files
• *.tag– Final output data
• *.cube– Density and orbital
data• *.bands– Band structure data
Visible files Hidden files
![Page 50: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/50.jpg)
Zn compounds using DFTB+
![Page 51: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/51.jpg)
• Zn-X (X = H, C, N, O, S, Zn)• Can be downloaded at www.DFTB.org (znorg-0-1)• Reference systems during fitting
– ZnH2, Zn(CH3)2, Zn(NH3)2, Zn(SH)2
– fcc-Zn, zb-ZnO• Applied to:
– Zinc solids, Zn, ZnO, ZnS– Surfaces, ZnO– Nanowires and Nanoribbons, ZnO– Small species interaction with ZnO surface (H, CO2 and
NH3)– Zn in biological systems
Working with Zn containing compounds
N. H. Moreira, J. Chem. Theory Comput. 2009, 5 , 605
![Page 52: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/52.jpg)
Zn Solids
Method Ecoh a(Å) b(Å) B0(GPa)
w-ZnO DFTB+ 9.77 3.28 5.25 161
PBE 8.08 3.30 5.34 124
EXP 7.52 3.25 5.20 208
zb-ZnS DFTB+ 7.93 5.43 - 44.2
LDA 7.22 5.35 - 82
EXP 6.33 5.40 - 76.9
W-ZnO DFTB+
W-ZnO PBE
• Reasonable solid state properties
N. H. Moreira, J. Chem. Theory Comput. 2009, 5 , 605
![Page 53: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/53.jpg)
ZnO Surface stability
F. Claeyssens J. Mat. Chem. 2005, 15 139
N. H. Moreira, J. Chem. Theory Comput. 2009, 5 , 605
•Predicts correct order and magnitude for the cleavage energy•Bond and angle deviation ~1-2%
DFTB+
DFT
![Page 54: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/54.jpg)
ZnO nanowires
•Good geometries and electronic structure•Excellent agreement with DFT results• Surface Zn atoms move inwards
N. H. Moreira, J. Chem. Theory Comput. 2009, 5 , 605
![Page 55: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/55.jpg)
CO2• Bond difference 1-2%• Binding too strong
~0.5 eV/CO2
• Turn over point for monolayer well described
NH3
• Overall good agreement with experiments and DFT calculations
Small molecule surface interaction
ZnO (1010)-CO2 ZnO (1010)-NH3
2/)( 0110 nEEE ZnOTabs
N. H. Moreira, J. Chem. Theory Comput. 2009, 5 , 605
![Page 56: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/56.jpg)
• Choose functional (LDA(PWC) or GGA(PBE))• The electronic fitting can be done in two modes
– Potential mode, confinement potential for wave function– Density mode, confinement potentials for wave function and
electron density• Each element will have its own settings
– What basis to use– Electron configuration– Confinement potential(s)
Electronic settings
![Page 57: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/57.jpg)
• Each fitting is done using different polynomial orders
• Fittings are done for a set of cutoff radius scale factors
Polynomial fitting setup
otherwiserr if
0)(
)( cutoffn
cutoffn
rrrf
![Page 58: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/58.jpg)
Possible future extensions to DFTB+
![Page 59: [PPT]Introduction to DFTB+ in Material Studio 6.0 · Web viewDFTB Why DFTB? Basic theory DFTB Performance DFTB+ in Materials Studio Energy, Geometry, Dynamics, Parameterization Parameterization](https://reader034.vdocuments.mx/reader034/viewer/2022050704/5aa9ae877f8b9a9a188d4425/html5/thumbnails/59.jpg)
• Optical Properties– LR-TD-DFTB
• Electronic transport – NEG-DFTB
• QM/MM• Vibrational modes
DFTB+ features outside of Material Studio
Please let us know what extensions and enhancements you would like to see for DFTB+ in the future.