[ppt]click to add title, arial 30 pts - rockwell...

Copyright © 2012 Rockwell Automation, Inc. All rights reserved.

Stratix 5700 Industrial Switch OverviewCompact and scalable solutions for EtherNet/IP networks


Today’s Pain Points

Ethernet networks continue to grow: Each machine adds another 5 - 50 Ethernet nodes Every line adds another 250 - 1,000 Ethernet nodes Each new product solves a new problem but adds more nodes A consequence of convergence is so many more devices are connected to the same

flat network

You need products and solutions that can help you simplify your network


Get the Right Information to the Right Person, at the Right Time

3

z

Plant Management View• Provide performance rollup• View asset utilization/yields

Maintenance View• Keep your machines running in peak

condition to increase your OEE• Identify root cause to minimize MTTR

Operator View• Simplify your machine operations• Diagnostics where you need them

Increase customer value by simplifying the integration of your machine into their existing network infrastructure


Presentation

Source

Delivery

Real-time Information

Rockwell Automation & our partners have the right solutions to meet your network requirements


Agenda

Hardware & Advanced Features

Stratix 5700 Overview

Simple Configuration & Maintenance Tools


The Stratix PortfolioIntegrating industrial and enterprise environments

• Productivity• Energy Savings• Safe Operations

• Time to Market• Scale & Modularity• Protecting IP

Switches for: Applications for small to complex

networks Monitor and control distributed devices Plant floor and enterprise integration

Addressing the needs of automation professionals…

Stratix 8000/8300Layer 2, Layer 3

Stratix 2000Unmanaged

Stratix 6000Layer 2

Stratix ETAPs

Stratix 5700Layer 2


The Stratix PortfolioIntegrating industrial and enterprise environments

Technology that offers: Scalable solutions Common, familiar tools

Cisco IOS & Configuration tools

Premier Integration within RA Integrated Architecture

Advanced switching, routing & security features Operator / maintenance-ready with built-in back-upManufacturing IT

… as well as operations & IT professionals

Stratix 8000/8300Layer 2, Layer 3

Stratix 2000Unmanaged

Stratix 6000Layer 2

Stratix ETAPs

Stratix 5700Layer 2


The Stratix 5700Layer 2 Managed Switches with Cisco Technology

Premiere Integration to the Integrated Architecture CIP interface

Studio 5000 AOP ControlLogix tags FactoryTalk View faceplates

Built with Cisco technology (IOS) Common feature set with Stratix 8x00 Common IT development tools

(CLI, CNA, DM, CiscoWorks) Simple to Deploy & Maintain

Easy integration Default configurations Common Smartports DHCP per port IP addressing

Easy maintenance Secure Digital card for configuration backup Diagnostics & network management tools

Compact & Scalable

Best of Rockwell & Cisco in a compact size


Stratix 5700 Configurations 3 base platforms offering 20 configurations

6, 10 & 20 port base units 6 copper & 4 copper + 2 SFP slots 8 copper + 2 combo* 16 copper + 2 combo* + 2 SFP slots

2 Gig port option SFP slots support multi & single mode fiber

Wide variety of SFPs available Compatible with other Cisco SFPs

Advanced feature set to address: EtherNet/IP applications Security Resiliency & Redundancy

Two software packages to choose from Lite & Full versions

Conformal coating option for harsh environments*Combo ports can be either copper or SFP

Ideal for simple to complex applications


Hardware Features

Dual (independent) power inputs 12/24/48VDC

Secure Digital storage card (optional) Stores configuration and IOS of

switch Alarm Relays

Two 24V configurable alarm inputs and single output

Console port Serial and USB port for direct

switch access Port and mode LEDs Dual ground contacts Din rail mount Temperature

-40° C to 60° C OperatingSecure Digital card

for backup(1784-SD1)

Redundant power

Configurable Alarm Relays

Port & mode LEDs


H x W x D

6 Port 5.1” x 2.95” x 4.3”130mm x 75mm x 109mm

10 port 5.1” x 3.6” x 4.3”130mm x 91mm x 109mm

10 port w/1588+NAT

5.1” x 3.6” x 5.05”130mm x 91mm x 128mm

20 port 5.1” x 5.0” x 5.05”130mm x 127mm x 128mm

Product Dimensions

Reduce cabinet space with a smaller form


The Stratix 5700 Engine = Cisco IOS

Cisco IOS® Software is the most widely leveraged network infrastructure software in the world

Currently operating on millions of active systems, ranging from the small home office router to the core systems of the world's largest service provider networks

Cisco's leadership in switching & routing is now in industrial Ethernet applications

Providing Robust, Reliable and Secure networking at the machine and plant levels

Copyright © 2012 Rockwell Automation, Inc. All rights reserved. 13

Optional Software Feature Set

Based of of Cisco IOS® Software World's leading network infrastructure software

Common feature set and configuration tools with Stratix 8x00 family

Software option: Lite - Ideal for machine level networks with

limited integration into a plant-wide infrastructure

Full – Ideal when machines that need to integrate with a converged plant-wide infrastructure

Includes IT- friendly features and functions

Hardware and software options helping to reduce your costs yet give you the performance & functionality you need


Highlighted Features:Automation

Optimizing network performance QoS – Quality of Service - default configurations are set to ODVA standards for EtherNet/IP industrial applications for

discrete, motion, safety and process applications IEEE1588 (CIP Sync) - ODVA implementation of the IEEE 1588 precision time protocol ensures performance when

connecting EtherNet/IP devices

Securing the machine CIP port control and fault detection - enable/disable port access based on Logix controller program or controller

mode (idle/fault) to limit access to the network based on machine conditions

Simplify design, deployment and maintainability DHCP per port - assign a specific IP address to each port, ensuring that the device attached to a given port will get the

same IP address Broken Wire Detection - detect cabling problems like, open, broken, cut or shorted twisted-pair wires, with status

availability in Logix Network Address Translation – NAT – A 1:1 IP address translation to help segment machine level network devices

from the plant network, translate only the devices that need to be visible to the plant network (Future Release 1.5 Q1CY13)

Designed & developed for EtherNet/IP applications


Highlighted Features: Security

Protecting the machine Application/Project (CIP) based port access

Controller based port control (on/off) Port access based on controller mode (idle/fault) Unauthorized device identification (tags) per port

Configurable port security Preconfigured port security set-up via smartports Configure number of devices allowed per port Configurable device MAC ID authentication

Protecting the plant Encrypted administrative traffic

SSHv2, SNMPv3, and HTTPS Advanced security features

802.1x for user authentication Multiple layers of password protection Access Control Lists (ACLs) to apply security policies per port TACACS+ and Radius for centralized authentication

Simplified tools to help machine builders protect their machinesAdvance feature set to meet IT standards and policy


Highlighted Features:Resiliency & Redundancy

Spanning Tree Protocol (STP/RSTP) <1sec recovery time

Resilient Ethernet Protocol (REP) Ring Topology <70ms recovery time

Flex Links – Redundant Star Topology <60msec recovery time

EtherChannel - Redundant Star Topology Port link aggregation - load sharing &

redundancy <100msec recovery time

The right technology to meet your needs

When network availability is critical to the application


NAT OverviewNetwork Address Translation

Provides 1 to 1 IP address translations Maximum 1 subnet and 127 single translations Translations provided on uplink ports

One or both ports for ring support Translation table is stored as part of switch configuration

Line Controller

Send message to Machine 2 PAC at address 10.10.11.2

192.168.1.2 192.168.1.3 192.168.1.4 192.168.1.5

Machine 1 NAT Translation192.168.1.2 = 10.10.10.2

192.168.1.2 192.168.1.3 192.168.1.4 192.168.1.5

Machine 2 NAT Translation192.168.1.2 = 10.10.11.2

Stratix 8300

Send message to Machine 1 PAC at address 10.10.10.2

REP

Cable break

Improve system uptime by adding a Ring using REPContinue to send messages to Machine 1 PAC at address 10.10.10.2 when broken connection

Easily integrate machines into existing network architectures

Available in Q1CY13

Can help segment machine network from plant network


Agenda

Hardware & Advanced Features

Stratix 5700 Overview

Simple Configuration & Maintenance Tools


Common Toolsets for Controls & IT

Automation Professionals FactoryTalk Services

Tightly integrates into the Integrated Architecture (IA)

IT Professionals Cisco CNA, CLI, CiscoWorks

Tightly integrates into joint Cisco and Rockwell Automation Converged Plantwide Ethernet (CPwE) Reference Architectures

The right tools for the right person

Configure, Manage and Diagnose your network with familiar tools


Premier Integration into the Integrated Architecture

Advanced status and diagnostic information Logix Predefined Tags Product identification I/O connection Port Status Alarms Broken wire detection Save and restore Link Status Unauthorized device Threshold exceeded Bandwidth Utilization Alarm relays Port Control

Device Profiles, Configuration Wizards, Operator Faceplates


Integrated into Studio 5000™

Add On Profile (AOP) Add Stratix switches into the

project just like you would I/O, Drives, Communication modules

Simple configuration and diagnostic tags available in the profile

Advanced diagnostics, including broken wire detection

You don’t need to be an IT professional to configure or manage the switch

Simplifies configuration and maintenance


FactoryTalk™ View Faceplates

Helps provide the diagnostics where you need them to get equipment back up and running… quickly

Help

AlarmsConfiguration

Status

Trending

Pre-engineered faceplates for network monitoring


Express Setup

Tailored for industrial automation applications Automatically sets many parameters including:

Enables CIP Configures network traffic prioritization

(QoS) settings for EtherNet/IP CIP, CIP Safety, CIP Sync, CIP Motion,

time synchronization (PTP) and other network traffic

Enables Layer 2 loop prevention (STP) Enables alarms, SYSLOG, and SNMP

notifications Enables IGMP snooping and querier

Automatically sets up the switch for control system applications


Device Manager

Web based graphical device management tool Dashboard, Configure, Monitor and

Maintenance views to help manage and diagnose network issues

Displays real-time views of configuration and performance

Simplifies task of setting up switch ports Express Set-up, Smartports

Graphical displays to easily monitor & diagnose the switch

Alarm tools to alert, identify and help solve network problems

Connect securely from your internet browser


Smartports Are a set of recommended configurations that can

be set on a specific switch port

Pre-defined settings for common devices like Logix controllers, I/O, ETAPs, Desktop devices

Optimizes traffic through the network Minimizes latency

Create, modify, import, export and develop custom Smartport macros

Select the device to the assigned port, the configuration parameters are assigned to the port

Create your own Smartport to customize and develop your own standards

Simplifies deployment and commissioning of equipment


Cisco Command Line Interface - CLI

CLI is the Cisco primary user interface for configuring, monitoring and maintaining Cisco devices

It is the primary tool used by IT professionals today

Used for advanced configurations Global macros and Smartports are

simply user friendly CLI scripts Available on Stratix 8000/8300 & 5700

IT professionals know and understand the language, helps with product acceptance when IT is involved


Single management tool for both IT and plantSame tool already monitoring the plant network

Cisco Network Assistant – CNA

Network management tool for: Configuration Monitoring Troubleshooting Maintenance

Compatible with Stratix 5700 & 8x00 family Free download from Cisco website

http://www.cisco.com/cisco/software/release.html

http://www.cisco.com/cisco/software/release.html


Configuration Copy and Backup Options

Secure Digital (SD) support Contains switch configuration and IOS Simple device replacement

Quickly duplicate and manage configurations Standard configurations copied to:

Multiple SD cards Multiple switches

Store and copy on a PC Configuration file can be edited on PC as .txt file Edit and copy to SD card for fast deployments

Store configuration as part of Studio 5000 project

Simplify duplication & storing switch configurations

A

B

C

A

A

AA

B

C


Easy Switch Replacement Simplifies On-site Maintenance

SD card stores entire configuration Operating system (IOS) Configuration parameters

Install SD card from failed switch into replacement switch

Power on and the switch is back to its required configuration

NO PC, NO set-up, NO configuration required!

Get your machines back up and running FAST!


Tools and Solutions

Simplifies the configuration, deployment and maintainability of

the network

Differentiate normal and priority traffic – Motion, Information, I/O,

Safety, Video, etc.

Reduces risk of down networks due to human error or threats

When resiliency and redundancy is critical to your applications

Simplifying network design & management

Performance of the Network Standard QoS with CIP Policies Time Synchronization

IEEE 1588 Precision Time Protocol

Security Programmatic port control Industry standard user authentication (802.1x) Encrypted management traffic Advanced Cisco compatible features (ACLs)

Resiliency & Redundancy REP (Resilient Ethernet Protocol) – Ring

<70ms recovery time Flex Link – Redundant Star

<60msec recovery time EtherChannel – load sharing & redundancy Spanning Tree Protocol – Redundant star

<1 sec recovery time

Common Program & Monitoring tools Rockwell Automation Tools:

RSLogix Add On Profile (AOP) Pre-defined Logix tags, View Faceplates

Cisco Tools: Command Line Interface (CLI),Cisco Network Assistant (CAN)


We have Product & Services to help

Products•Switching and routing

•Media•Gateways

Service•On-site Assessments

•Installation•Training•Network and security services

Support• Remote diagnostics• Real-time phone and chat support

• Knowledgebase• Forums• On-site support• Migration• Commissioning• Asset management

Rockwell Automation & our partners have the right solutions to meet your network requirements


Questions?

For more information http://ab.rockwellautomation.com/Networks-and-Communications/Ethernet-IP-Infrastructure

37

http://ab.rockwellautomation.com/Networks-and-Communications/Ethernet-IP-Infrastructure

http://ab.rockwellautomation.com/Networks-and-Communications/Ethernet-IP-Infrastructure

[ppt]click to add title, arial 30 pts - rockwell...

Documents