powersoft dm3004pfc4 data en v1.6
TRANSCRIPT
-
8/10/2019 Powersoft Dm3004pfc4 Data en v1.6
1/2
powersoft_
DM3004PFC4_
data_
en_
v1.6
2014 Powersoft Data are subject to change without notice.
Powersoft S.p.A.Via Enrico Conti, 5 - 50018 Scandicci (FI) ItalyTel: +39 055 735 0230 - Fax: +39 055 735 6235www.powersoft-audio.com
DigiMod 3004PFC4High Efciency 4-Channel Class-D Amplier Module For Professional Applications
High Power 2-way and 3-way PA
Systems / Line Arrays
High Power Single or Double Subwoofer
Multi-Channel High Power Applications
High Power Sub+Satellite Systems
Efciency and robustness, always and everywhere
f Latest generation single-stage patented Power Factor Correction design
allows to achieve optimal and consistent performance in all operating
conditions worldwide.
Maximize performances, minimize consumption
fPatented SRM (Smart Rails Management) technology allows to maximizethe efciency of the sys tem and drast ically reducing power consumption
at any load condition.
Premium Performances
f Powersoft Class-D technology is an industry s tandard in terms of quality,
reliability, robustness and at tention to detail. Accurate design of the
Pulse Width Modulation block guarantees maximum performance, high
predictability and immunity from intermodulation artifacts.
Powerful and exible signal processing tools
f Using Powersofts new DSP-4 together with Armona Pro Audio Suite
you can tailor the modules behavior to t your design: from standard
Linkwitz-Riley crossovers to FIR lters, from limiters to delays andeverything in between.
Complete set of protections
f Powersoft amp modules are equipped with extensive protection
circuitry: power limiters, thermal shutdown, short circuit and overload,
clip limiter.
Certication process made easy
f Powersoft provides EMI/safety certications, reports and documentation
that will ef fectively cut certication costs on the nal product .
Compact:
f
Power supply, output stage, DSP and connectors are all included in asingle, compact, lightweight and protected chassis
The DigiMod 3004PFC4is an
amplier module featuring 4 output
channels specically designed for multi-way
loudspeakers and asymmetric loads.
The highly compact design, integrating all
4 channels and the power supply in a single
chassis, makes the DigiMod 3004PFC4
a unique product, capable of delivering up
to 2000 W on a single 4 channel, granting
the highest power available for driving all
speakers on multi-way systems.
The 6-layers PCB and a new power supply
design equipped with PFC and featuring
Smart Rails Management grant reliability and
low power consumption in any operating
conditions.
The DigiMod 3004PFC4is fullycompatibile with all existing Powersoft DSP
solutions, and represents, in conjunction
with the DSP-4, the most advanced platform
for 3-way active systems.
3-way unbalanced load (e.g. 3-way line array)LF: 3000 W @ 8 BTLMF: 1000 W @ 8 SEHF: 500 W @ 8 SE
2-way unbalanced load (e.g. active loudspeaker) LF: 3000 W @ 8 BTLMF/HF: 1500 W @ 8 BTL
Balanced load (e .g. double subwoofer) 2x 2000 W @ 8 BTL
Max output voltage per channel 140 Vpeak
EIAJ Test Standard, 1 kHz, 1% THD
f Thermal protections
(power limiting - thermal shutdown)
f Short-circuit/overload/high frequency
output protections
f Clip limiter, permanent signal limiter
f Auxiliary output voltages
f Bypass line outputs for
external active/passive lters
f Mute commandf Temperature controlled
internal fans and output
f Optional DSP boards
f Fully integrated in Armona Pro Audio
Suite for Monitoring, Remote Control
& Networking with optional DSP board
T T
T T
T T
T T
T T
T T
http://www.powersoft-audio.com/http://www.powersoft-audio.com/ -
8/10/2019 Powersoft Dm3004pfc4 Data en v1.6
2/2
2014 Powersoft Data are subject to change without notice.
Powersoft S.p.A.Via Enrico Conti, 5 - 50018 Scandicci (FI) ItalyTel: +39 055 735 0230 - Fax: +39 055 735 6235www.powersoft-audio.com
High Efciency 4-Channel Class-D Amplier Module For Professional Applications
DigiMod 3004PFC4
Specications
General
Number of channels 4 I/O channels, bridgable per channel pair
Max output power per channel* single channel mode bridge mode
EIAJ Test Standard, 1 kHz, 1% THD 4 / Ch 8 / Ch 16 / Ch 8/ Ch pair 16/ Ch pair
2000 W 1000 W 600 W 3000 W 2000 W
Max output voltage 140 Vpeak(100 Vrms) 280 Vpeak
Max output current 54 Apeak(38 Arms)
AC Mains Power
Power supply Universal regulated, switch mode with PFC
Nominal power requirements AC 100 V - 240 V 10%, 50/60Hz
Operating range AC 90 V - 264 V
Power factor (cos) > 0.90 @ 4 full power
Power consumption
I/8 of max power @ 8 bridged 600 VA
Thermal
Max environmental operating temperature 40C
Thermal dissipation Fan, variable speed, temperature controlled
115 V 230 V
I/8 of max output power @ 4 621 BTU/h 156 kcal/h 615 BTU/h 155 kcal/h
I/4 of max output power @ 4 1154 BTU/h 290 kcal/h 1123 BTU/h 283 kcal/h
Audio
Gain (dB/voltage) selectable: 32 dB, 38 dB (x40, x80 voltage gain respectivelly)
Frequency response 20 Hz - 20 kHz (+0 -1 dB) for 1 W @ 8
S/N ratio (amplier section) > 115 dBA (20 Hz - 20 kHz, A weighted)
Crosstalk separation -70 dB @ 1 kHz (4 )
Input sensitivity @ 8 1.6 V / +6 dBu
Max input level 2.7 V / +10.8 dBu @ 32 dB gain
Input impedance 10 k balanced
THD+N* < 0.09% 1 W to full power @ 4 (typically