powerpoint presentation€¦ · patent no: 2013100948 • multicap is a uniquely designed product....
TRANSCRIPT
This document is strictly Private and Confidential and remains the property of Sureguard Safety Australia Pty Ltd. It is not to be altered, duplicated or copied in any way.
CLEARVIEW – Patent AU2013101096 Fully Australian Owned – CLEARVIEW is designed, developed and manufactured entirely in
Australia.
•The improved modern design of the attachment slot allows the CLEARVIEW helmet to accept most
general 25mm and 30mm attachments that are in the marketplace (cap attachable earmuffs, visor holder,
etc).
•Made from high impact Polycarbonate
•Extra strong and robust, yet light weight
•The CLEARVIEW caps are designed to be translucent with a see through peak
•The see through peak allows the wearer to look upwards without the need to tilt the head back, causing
discomfort in the neck over a prolonged period of time
•CLEARVIEW also stops the need for the wearer to reverse the head harness in the helmet which normally
allows the wearer to have clearer vision while looking upwards
•This new CLEARVIEW range was designed so the wearer has a clear view looking through the helmet
peak - allowing for safer working conditions and a much safer working environment
•CLEARVIEW has:
• Adjustable 6 point terylene harness or poly cradle.
• Rain guard with reinforced peak.
• Miners Helmet available, with metal or plastic lamp bracket.
• Wide colour range - with logo printing available in up to 8 locations.
•CLEARVIEW is available in vented and non vented designs.
•CLEARVIEW is available in a wide range of exciting translucent colours
•CLEARVIEW is fully Standards approved to AS/NZS 1801
•The CLEARVIEW range is UV400 stabilized and is suitable for indoor or outdoor use.
•CLEARVIEW is the new future of Hard Hats
•Made in Australia
Safe, practical, colourful and fashionable – CLEARVIEW
THE NEXT GENERATION IN HARD HATS
CLEARVIEW hard hats
Multi Purpose Extra large jaws hold small to extra-large gloves
Strong tension for heavier gloves or articles
Unique centre safety break device plus replacement
Non-conductor of electricity
The SSA Croc Grip is ideal for use in work domestic environments:
Automotive
Industrial
Electrical
Construction
Mining
Forestry
Food/Hospitality
Emergency Services
DIY/Home handyman
... the list is endless!
Made in Australia
The centre safety break device protects the user by breaking at an engineered pressure if the article
which the Grip is attached to becomes jammed or snagged in machinery. This will minimise the
potential for injury.
version as show below as well as in bulk (n header carded).
CROC GRIP – single / twin pack
ELECTRICAL SUSPENSION HOOK - 5 Pack
Polyprop
Electrical Suspension Hook
• Electrical Suspension Hangers are used for suspending electrical
leads and cables on worksites helping to reduce the risk of tripping
and falling
• Electrical Suspension Hangers are rated to hold a maximum weight of
10 kilograms. Joining multiple Cable Grips together does not increase
the maximum holding weight
• Electrical Suspension Hangers can be used in both industrial and
commercial areas, it is the solution to numerous hanging problems
• Made in Australia
cket Anchors not supplied
glass filled polypropylene
Multi Purpose Suspension Hook
• Cable Grip is a multi purpose suspension hook
• Cable Grip is designed to hang just about anywhere – garage, shed, workshop,
office or working environment
• Cable grip can be used around your home or workplace
• Cable grip is a non conductor of electricity.
• Detachable support bracket included to install Cable Grip to timber, plaster board,
metal or concrete with correct anchors
• Cable Grip suspension hangers are used for suspending electrical leads and cables
on worksites helping to reduce the risk of tripping and falling
• Cable grip can hang from timber 100x50mm, 75x50mm and 50x50mm fences, pipes
and can be attached to walls.
• Cable grip is UV stabalized for outdoor use.
• Hi Vis Yellow ensures high visibility to workers
• Cable Grip is rated to hold a maximum weight of 20 kilograms. Joining multiple
hooks together does not increase the maximum holding weight.
• Cable Grip is Made in Australia from high quality glass filled polypropylene Anchors not supplied
MULTI PURPOSE SUSPENSION HOOK - Twin Pack
Patent No: 2013100948
• MULTICAP is a uniquely designed product. It is designed to fit over star pickets and
allows fence wire to pass through the cap and star picket when in place
• MULTICAP is designed to fit on both 12mm and 20mm reo bar
• MULTICAP has a unique securing system on star pickets and can be applied to star
pickets by hand in most cases
• Once fitted to a star picket, MULTICAP is securely locked in place, ensuring it will
be difficult to be removed by the elements
• MULTICAP is manufactured in a hi-vis orange colour as an added safety feature to
stand out on building sites, work sites and rural areas
• MULTICAP is manufactured from a strong co-polymer polypropylene
• MULTICAP is reinforced on the top and the base to give extra strength
• MULTICAP has a moulded impression of the star picket on top which allows for
correct fit on star pickets
• Made in Australia
MULTI CAPS - Bag 10
The Cap Grip is a patented product Patent Number 2010101220. The Cap Grip is manufactured in Australia by Sureguard Safety. The Cap grip will hold the following popular
Tuffgard Kits (Helmet + Hard Hat Holder)
These kits have been designed specifically for the following Work Health
and Safety Roles:
• Chief Warden
• Deputy Chief Warden
• Area Warden
• Warden
• First Aid
The helmet colours and titles are as per the Australian Standard, they
have been placed in our Cap Grip Holder for ease of storage and
attachment to office equipment such as filing cabinets and metal
stationary cupboards. They can also be affixed to timber and
plasterboard walls using the appropriate anchors. The helmets are also
available individually with printed logo.
Made in Australia
HARD HAT HOLDER KITS
The Cap Grip is a patented product Patent Number
Hard Hat Holder
Patent No: 2010101220
• Contains high performance magnets for attaching to metal surfaces plus screws to
attach to timber and plaster board surfaces
• Inbuilt safety glasses holder
• Suitable for most standard type hard hats
• UV Stabilised for outdoor use
• Practical use and place applications: Mines, Trucks, Offices, Work Utes, Forklifts,
Factories, Site Sheds
• Cap Grip will hold the following popular brands and styles:
• Sureguard – Tuffgard and Clearview Range
• Unisafe – Unilite Range – RA550, TA560, TA570, TA580,
• MSA – V Gard Range
• Paramounts – HH6 Range
• Protector Brand – HC43
• Made in Australia
HARD HAT HOLDER