powerhouse systems · current 21a (max.) 20a (max.) psophometric noise < 2mv at full load, over 600...

Revised 09.10.2012

an R&D TechnologyGroup Company

PowerhouseSystems

ContentsPhase Control DC Systems 2Modular DC Systems 3Modular Inverters 6Modular Static Switches 7Modular DC/DC Converters 8Power Factor Correction 9Transformers 14Power Supplies 15

Uninterruptable power supplies (UPS)

Surge Protection

Offline

Line Interactive

True Online

Compuguard Series 16

Safeguard Series 18Defender Series 20Commander Rack Tower 22UPS Software 24

Centurion Tower 26Centurion Rackmount 29Centurion 3 to 1 32Platinum Series 34Power Plus Series 36

Surge Boards 43Zone Defender Pro 44Zone Defender 2 48

2 Power Conditioning CataloguePhase Control DC Systems

SPECIFICATIONS

Powerhouse’s Phase Control DC systems are of constant voltage and current limited type. Utilising SCR phase control design they provide a rugged and highly reliable DC supply.

Available with single and three phase inputs, the Powerhouse Phase Control series are ideal for charging sealed lead acid, vent-ed lead acid and lithium phosphate batteries.

Phase Control DC systems are in widespread usage throughout Australia to supply LV & HV switchboards, DC substations, emergency power and lighting systems, and switch tripping. As a result, HILITE chargers are found in both commercial and industrial operations, in areas such as hospitals, airports, utilities, communications, mining and petrochemical industries.

Dependant upon rating, DC systems can be housed in wall-mount or free standing enclosures, which will normally accommodate optional equipment and batteries without increased size. Larger enclosures are available for more complex systems.

PHA

SE C

ON

TRO

L DC

SYS

TEM

S

Input Voltage 220/240 Single Phase +/- 10%380/400/415 Three Phase +/- 10%

Input Frequency 50-60Hz ± 3Hz

Output Voltage 24, 32, 48, 110, 125 VDC

Charging Voltages

Sealed Lead Acid: Float 2.2-2.25V per cell, Boost: 2.3-2.4V per cellVented Lead Acid: Float 2.2-2.25V per cell, Boost: 2.3-2.5V per cellLithium Iron Phospate (LiFePO4): 3.6V per cellThe above settings will vary with cell manufacturer, cell type, duty and ambient conditions.

Output Power Single Phase < 6KWThree Phase > 6KW

Ripple VoltageRMS ripple voltage across the battery will not exceed 2% of the nominal system voltage when a battery of Ah capacity of 4 times that of the charger nominal current rating is connected.

RegulationOutput voltage regulation of +/- 0.5% and current regulation of ± 1%, providing the mains input variations do not exceed ± 10% Voltage, ± 5% frequency and for load changes 0-100%.

Temperature Range

Operational: -10ºC to +40ºC +40ºC to +65ºC (de-rate current by 1% per ºC)

Cooling Air Convection (fan assist - high power units)

Efficiency 80-93% dependant on system voltage and power rating.

AlarmsCharger Fail, Low Volts, High Volts, Low Electrolyte and Earth Fault with audible warning.

Meters Charge Current, Load Current and Battery/Charger Voltage.

Indicators LED Panel: Power On, Boost, Float, Charger fail, Low Volts, High Volts, Low Electro-lyte and Earth Fault.

Controls Input and Output Circuit Breakers, Alarm Reset and Boost Initiation Push buttons.

Options Voltage free contacts for all alarms, Battery Test, Low Voltage Disconnect and Mains Failure alarm contact.

Enclosure

Suitable for operation in industrial environments and tropical conditions. Sheet steel to IP42 with powercoat finish (colour to customer requirements). Alternative materials and IP ratings available on request. Batteries can be housed within the enclosure in a separate compartment.

AS Standards AS1939, 1955, 2293, 2374, 2735, 3000, 3108, 3901 & 4044

3www.powerhousesystems.com.auModular DC Systems

MO

DULA

R DC

SYS

TEM

S

Powerhouse’s Modular DC power system (1UDC+) provides clean DC power to sensitive equipment while simultaneously charging the battery bank, sup-plying backup power during mains failure.

The 1UDC+ contains a 19” 1U subrack that can house up to 3 hot-plugged rectifiers, or 2 rectifiers & controller and an ELVD device. Max system capacity: up to 13 subrack (38 rectifiers + controller), 1266A with height of 13U

Basic shelf: 1U DC + type II – includes a 19” 1U shelf (subrack) with up to 3 rectifiers

Electronic Shelf: 1U DC+ type I – includes a 19” 3U shelf with up to 2 rectifiers + SC 1UDC + control-ler and an electronic ELVD device

FEATURES:• Very high efficiency: 96%• 100A for each 1U shelf• Intelligent power module, digitally controlled• One to three hot-swap rectifiers in each shelf• Active current sharing among rectifiers• Universal input voltage• A built-in dual 70 A Electronic Low Voltage Disconnect device (ELVD) for

battery protection• Option to connect 2 external LVD contactors of up to 1600 A• A high-performance, hot-swap system controller (SC 1UDC+) to measure,

monitor and control voltages, current, power, battery, temperature, etc.• USB (SC1U DC+) or TCP/IP+USB communication (SC 1UDC+ NET)• Advanced battery management• Up to two battery sets handled in one system• Automatic and pre-programmed battery test (for each battery set)• Automatic and pre-programmed equalize charging mode• Breaking alert by modem (option)

4 Power Conditioning Catalogue

The PS1UDC+ power system is comprised of four main subsystems:

• Shelf Unit: Type I: 1U DC+ type I – includes a 19” 3U shelf with up to 2 rectifiers + SC 1UDC + controller and an electronic ELVD device

Type II: 1U DC + type II – 19” 1U shelf (subrack) with up to 3 rectifiers

• System controller: Monitors and controls the system and also communicates with an external PC or network. This is done by an RS232 serial port (standard) or via PPP/SNMP/TCP-IP protocol (optional).

• Rectifier module(s): Convert(s) ac input to dc output.

• Electronic Low Voltage Disconnect (ELVD) device: Disconnects the battery from the load, preventing the damage to the battery that results from over-discharging. The PS1UDC+ has a true semiconductor-based LVD with no moving parts (such as relays or contactors). This ensures reliable operation and a long MTBF. The ELVD of the PS1UDC+ uses power MOSFETs to perform the switching. The ELVD has two branches that can handle two independent battery sets. (For loads higher than 120 A, battery disconnection is performed by a dc contactor (LVD).)

MO

DULA

R DC

SYS

TEM

S

The rectifiers are “hot pluggable” and operate in parallel. This means the rec-tifiers can be added or replaced with no impact on the power supply to the load devices and with no impact on the battery charging current. The parallel configuration of the rectifiers also enables the user to define an “N+1” or “N+2” redundant system.Each rectifier has its own current sharing system, and provides complete, precise current sharing among rectifiers.Output terminals for connecting the load and battery sets are mounted on the connecting busbars of the motherboard, located behind the removable metal rear panel.OPTION: On customer request, the the PS1UDC+ power system can include a special additional rack containing dc–dc converters.

BLOCK DIAGRAM OF PS1UDC+

5www.powerhousesystems.com.au

MO

DULA

R DC

SYS

TEM

S

1UDC+ SPECIFICATIONSINPUT 1UDC 24V 1UDC 48V 1UDC 48V EE

Nominal Voltage 230V

Voltage Range 85Vac - 285Vac, with derating

Maximum Current1 (@ full load) Nx6A Nx10A

Frequency 47Hz - 63Hz

Power Factor (@ Full Load) > 0.99

Protection Relay disconnects input for >300V Fused Relay disconnects

input for >300V

OUTPUT

Voltage (default) 27 ± 0.2Vdc 54 ± 0.2Vdc

Adjustable Range 23Vdc - 30Vdc 47Vdc - 58Vdc

Regulation (line & load) ±1%, ±0.25% with controller

Nominal Current1Nx40A (Vin>195V) Nx20A (Vin=110V) (max 38 modules)

Nx33.3A (Vin>195V) Nx16A (Vin=110V) (max 38 modules)

Ripple & Noise @ BW=30MHz 200mVp/p, 20mVrms

Psophometric Noise -52dbm over 600 Ω (


MO

DULA

R IN

VERT

ERS

POWER 0.5kVA 24V 1kVA 48V

Topology Dual high frequency conversion

Control Dual 8-bit RISC Microcontroller

INPUT

Voltage 24Vdc (nominal) 21- 30Vdc 48Vdc (nominal) 42 - 60Vdc

Current 21A (max.) 20A (max.)

Psophometric noise < 2mV at full load, over 600 Ω

Low voltage shutdown 21Vdc ± 0.5 42Vdc ± 0.5

OUTPUT

Voltage 220/230Vac

Power 500VA / 300W 1000VA / 700W

Efficiency (dc-ac) 88% @ 24VDC 90% @ 48VDC

Frequency 50/60Hz ± 0.1% (free-mode)

Synchronization system Active current sharing

Waveform Pure sinewave

THD 1.5% max. for linear load 4% max. for non-linear load

Crest factor 3:1 max. for non-linear load

Voltage regulation (line & load) ±1% (static) recovery within 500mS

GENERAL Parallel Configuration Up to 30 units in parallel

Isolation voltage 1500VAC input-output

1500VAC output-chassis500VDC input-chassis

Protection Output over-voltage, output overload

& short circuit (inherent by pulse-by-pulse) LVD (low input voltage disconnection), over-temperature

Display 5 LEDs and load bar graph

Safety IEC 950 (EN 60950)

EMC (including the shelf ) EN300-386-2, EN 50082-1, EN 55022

Audible noise < 50dBA @ 1.5m

Temperature -10OC - +50OC -10OC - +45OC

Signalization 1 dry contact (fault indication)

Dimensions WxHxD (mm) 202 x 44 x 243

Weight (without shelf ) 1.5Kg

SPECIFICATIONS

Model IPU1000

Features • Up to 30 units in parallel, 30kVA • Employs high frequency PWM technology • A microprocessor controls all diagnostics and operation • Power density (2kVA in 1U 19” shelf; • 1kVA in 1U 9.5” cabinet) Lightweight • Standalone or parallel operation Parallel capability for N+1 redundancy

High efficiency • Continuous input DC curent • Optional: bypass (for standalone operation)

All specifications are typical and subject to change without prior notice

Modular Inverters


MO

DULA

R ST

ATIC

SW

ITCHE

SAC input and output Three phase with a common neutral is available Nominal power 10 ~ 250 kVA

Input voltage range 196 V ~ 253 V (Phase to Neutral), other values are available

Input frequency range 46 Hz ~ 64 Hz, other values are available

Transition time in synchronized mode1 < 3 msec

Transition time in non-synchronized mode < 200 msec

Signals and indicators 5 LEDs, 3 keys, audible alarm

Efficiency 99.90%

Regulations Complies with the IEC950 standard

AC input and output Single phase with common neutral Nominal power 3 to 30 kVA Input voltage range 187–253 Vac, other ranges also available Input frequency range 46 Hz–64 Hz, other ranges also available Signals and indicators 6 6 LEDs, 3 keys, audible alarm, RS232 interfaceEfficiency 99.90%Size in mm (H × W × D) 132 × 483 × 250 (3U) Weight


MO

DULA

R DC

/DC

CO

NVE

RTER

S INPUT SINGLE DC-DC 48-24 MODULE Voltage range 42 - 61.5VDC Current 17A (max) Efficiency >88% Protection Against reserve polarity connection Low Voltage Protection Stops at Vin < 42VDC Restart operation Automatic at Vin > 46VDC

OUTPUT

Voltage 24VDC Current limit 25A (folds back to 9A at short circuit) Voltage adjustment ±5% Voltage regulation ±1% Ripple 50mVrms Protection Over load, output OVP, Over-temperatureDisplay 4 LED bar-graph display the load level Parallel operation Active current-sharing

General

Ambient temperature -10°C - 50°C Humidity 0-95 % Dimensions (mm) Weight (Kg) 146 (W); 44 (H); 260 (D) 0.8

Withstand voltage Input – Output: 1500VDCInput – chassis: 1500VDC

Output – chassis: 1500VDC

Cooling Forced, fan speed control Safety IEC950, EN60950

EMC EN55022, EN6100-4-2 2,3,4,5,6,11

EN61000-3-2 EN6100-3-2, EN61000-3-3

48/24 600W Modules This dc-dc converter module simply converts a nominal 48 V (42 V-61.5 V) into 24 V (25 A maximum) accurate voltage at the output. The unit comes with the option to parallel several similar modules in order to gain more power and redundant operation (N+1).

- All specifications are subject to change without prior notice - All images are for illustration only

DC POWER SYSTEMS - 130912

Modular DC/DC Converters


The following is a general description of the Powerhouse Systems standard Automatic Power Factor Correction system and the components used.The Powerhouse Systems Power Factor Correction equipment is based on many years of experience with the application and installation of automatic power Factor cor-rection equipment in Australia for Australian conditions and using the latest Australian and Overseas standards.

The following Standards are used in the Powerhouse Systems equipment:

IEC 831 - Part 1 and 2 - Manufacturing Standard for Power Factor Correction Ca-pacitors AS 1013 - 1971 - Shunt Capacitors - Where applicable AS 3000 - 2007 - Wiring rulesAS 3008 - 1.1.1998 - Selection of CablesAS 2005 - FusesAS 1028 - Reactors and TransformersISO 9000 - Quality standardsLocal Supply Authority - Service and installation Rules

The kVAr rating of the Powerhouse Systems Power factor correction equipment are based on -

Volts - 415 Volts (+10%) Phase - 3 Phase plus Earth + NeutralFrequency - 50 HzTemperature - 45ºC Continuous Maximum Ambient

The basis of the Powerhouse Systems Power Factor Correction equipment is safety and reliability. All equipment is front accessible and modular in constructionA freestanding 2mm sheet steel, powder coated cubicle is supplied to house all equipment. Forced ventilation, designed to extract air from the top of the cubicle via base screened vents is included. Two(2) High reliability ball bearing cooling fans, ther-mostat controlled, are mounted in the roof and provide a minimum airflow rate of 710m3/h each.Highest quality capacitors are mounted in a separate enclosure, attached to the standard enclosure. This cubicle is separately ventilated.

Modular ConceptThe design utilizes a Modular concept with 100kVAr withdrawable modules contain-ing all required parts. The modules can be removed and replaced within 30 min-utes.

AUT

OM

ATIC

PO

WER

FA

CTO

R C

ORR

ECTIO

N

RATING

GENERAL

DESIGN

GENERAL

Power Factor Correction


CONTACTORS

Detailed Specifications of Capacitors

Standards - IEC 831 1+2/88, VDE 560-46+47 3/95Overvoltages - +10% (8 hours daily) - +15% (30mins daily) - +20% (up to 5 mins) - +30% (up to 1 min)Overcurrent - 1.3In - 1.5 In with 10% Overvoltage , 15% over capacitance and harmonics included, continuous operation.Test Voltages - Terminal/ Terminal - 2.15 Ucn AC 2 Seconds - Terminal/ Casing - 4800 VAC, 2 SecondsTemperature - Category - -25/D ( max. 55 Deg C) To IEC 831 - Max Case Temp. 65 Deg CInrush Current - maximum 200 Times Rated CurrentRated Capacitor Voltage - Ucn: Standard - 440Volts (& 480 Volts) Detuned - 525 Volts

Capacitors are mounted in a separately ventilated cubicle, away from reac-tors, contactors and any heat generating equipment.

Standards - IEC 947-4-1 - AS3947-3Contactors designed especially for switching low inductive capacitive loads are used. These contactors are used for switching capacitors mentioned above and are protected against contact welding for a prospective current of 200 x I e . i.e. 200*72 Amps.

Contactors have magnetically switched early make contacts and damping resistors. These reduce the inrush current to


Standards - IEC947-3Fully shrouded fused isolators are used to isolate and protect either the Power Factor Correction system and/or the individual steps. These are busbar mount-ed and contain DIN fuses suitably rated for protection of each capacitor step and connecting cables (125 Amp for 50kVAr and 63 Amp for 25kVAr steps).

Switching ratings - Step Switch-Fuse - 160 Amp- Making Capacity - 40kA- Impulse Voltage - 8kV

Main Isolator - 400 Amp , 630 Amp, 800, 1250 Amp - Making capacity - 100kA - Impulse Voltage - 12kV Fuses - DIN - To IEC 269-2-1 Breaking Capacity 120kA (size 00-2)

(Monitors power factor and controls capacitor steps)

The reactive control relay is mounted on the front door of the cubicle and monitors the incoming voltage and current from the main switchboard. Based on target power factor and actual switchboard power factor, it switches capacitor steps in or out of circuit ensuring that connection and reconnection times are met.

Reactive Controller Features• Microprocessor Based• Digital Display of Power Factor, step Number op-

erating and all setup information.• Circular switching i.e. all capacitor steps are equal duty shared.• Zero Voltage Tripping i.e. On mains failure, all steps are switched out and , upon

mains restoration capacitors are switched in again only after the correct block-ing delay

• High resistance to faults due to mains harmonics i.e. input circuits have a band pass filter fitted

• Alarm output and indication of (a) Failure to achieve target power factor. (b) Mains failure (c) Temperature (d) Harmonic levels (voltage and Current) (e) Voltage and Current levels (f) Display of Volts, Amps, Kw, KVA, KVAr, Harmonics, temperature, Contactor switchings and duration of contactor operation (g) All maximums data logged for future reference

• Options - serial output RS485, RS232 (profiBus and ModBus )• Front Panel protection - IP 54

(Protects and isolates Capacitor Steps)

AUT

OM

ATIC

PO

WER

FA

CTO

R C

ORR

ECTIO

N

SWITCHES - FUSES

REACTIVE CONTROL RELAY


(Where fitted, Tunes Capacitor Bank below Harmonics)

Standard - AS 1028Harmonic detuning reactors are placed in circuit prior to capacitors to “detune” the capacitor bank to below harmonic frequencies e.g. 5th (250Hz) 7th (350Hz) 11th (550Hz) etc. which are usually caused by power switching devices e.g. Variable speed drives, UPS Systems, Arc Furnaces etc.

Type - Dry Type, Air CooledTuned Frequency - 189 Hz (7%) detuningCurrent Rating (Min) - 70 Amps I1, 51 Amps I5, 86 Amps I total, 100A Flux Density - < 0.80TeslaWinding Temp rise - Not more than 40ºCQ factor - 38Insulation Class - Class H - 180°C Dielectric Strength - 3kV for 1 Minute to IEC 76/3Core Type - High Permeability silicon Grain Oriented Laminated Core.Losses - 86Watts/50kVAr StepConductor and Termination - Copper and busbar connection

MountingWiring to reactors is via single flexible lugged cables. Reactors are mounted on non-magnetic brackets (Aluminium) to Eliminate eddy currents and reduce noise and heat loss.

Standard - AS3439.1 - IP31 standard, IP54 Optional.Cubicle construction is sheet steel minimum thickness 2mm, powder coated X15 orange to AS2700 (any other colour to AS2700 powder coat available).

Features• 100mm (or 75mm) heavy duty Galvanized Plinth• Door mounted screened vents on all doors• Three(3) point locking on doors above 1200mm• Gland plate, 3mm thick, non-magnetic fitted to roof of cubicle, positioned

over incoming connections. Bottom cable entry available• Dust proof seals are mounted on all doors

HARMONIC DETUNING REACTORS

CUBICLE CONSTRUCTION

TESTING AND COMMISSIONING

(To house all components and provide environmental protection)

Before dispatch, all power factor correction systems are tested as follows

• Insulation check – 2,000 Volt for 15 Seconds ph-ph and Earth

• All connections and joints checked • Capacitance and wiring check of each step• Reactive relay setup and test• Full load current check of each step including harmonic checks• Completion of test/commissioning report.

13www.powerhousesystems.com.au Power Factor Correction system - 250912

AUT

OM

ATIC

PO

WER

FA

CTO

R C

ORR

ECTIO

N

R&D Technology Pty Ltd Specialised Engineering Products

Powerhouse Systems Pty Ltd

Newcastle P: +61 2 4014 9000 F: + 61 2 4014 9099 Gloucester P: +61 2 6558 2986 F: + 61 2 6558 1002Mackay P: +61 7 4952 3833 F: + 61 2 4014 9099

E: [email protected] website: www.rdtechnology.com.au

Brisbane P: +61 7 3846 2644 F: + 61 7 3846 2346 E: [email protected]: www.powerhousesystems.com.auan R&D Technology

Group Company

PowerhouseSystems

A complete instruction manual is included with each system shipped, which in-cludes the following major items:

• General Description of Power Factor and Installation• Description of Equipment with Specifications and test reports• Commissioning instructions• Component detailed data sheets and performance specifications.• Schematic and wiring diagrams• Maintenance Instructions

INSTRUCTION MANUAL


Product Information

R&D Technology Pty Ltd Specialised Engineering ProductsNewcastle P: +61 2 4014 9000 F: + 61 2 4014 9099

Brisbane P: +61 7 3846 2644 F: + 61 7 3846 2346Wollongong P: +61 2 4285 9978 F: + 61 2 4285 9989Gloucester P: +61 2 6558 2986 F: + 61 2 4014 9099

Regional QLD P: +61 7 4952 3833 F: + 61 2 4014 9099E: [email protected]

website: www.rdtechnology.com.au

Simply contact R&D Technology to obtain the product that suits you...!!Note: all information is subject to change & images are for illustration purposes only.

Below will show you just some of what we candesign and build to your specifi cations and needs....

Transformers

Transformers Brochure - Rev A

Auto transformers - 7.5kw - 1000kw

Three phase transformers from 100va - 500kva...

We can handle almost anythingbig or small, all to Australian standards.

We make single phase 100va - 100kva transformers

AUSTRALIANMADE &OWNED

Custom

Designs

Availabl

e

Transformers


PowerhouseSystems


Product Information

We supply one of the widest selection of dc/dc converters and powersupply products including ac/dc power supplies, dc/dc converters, battery chargers, laboratory/lab power supplies, medical power supplies, dc/ac power inverters, etc., and offer facilities to customise power supply solutions to customers’ specifi cations.

Power Supplies

Power Supplies Brochure - Rev APower Supplies


PowerhouseSystems


CompuGuard

features• Designed specifically to protect todays modern computer

• Unique inverter design allows it to support the most severe Active Power

Factor Corrected power supply units

• Compact size

• Sleak tower design can stand vertically next to your computer

• Low profile design lies flat and you can even put your monitor on top

• Flush wall design for mounting to wall or under desk

• Excellent microprocessor control guarantees high reliability

• Auto restart while AC is recovering

• Cold start function

• Full protection: Discharge, overcharge, short circuit,

and thermal protection

The sophisticated CompuGuard UPS is PowerShield’s

latest development and has been designed by our

engineers specifically to protect today’s modern

computer. This low cost, slimline UPS has three Australian

sockets, two for battery backup and one for surge

protection. This UPS has the smallest footprint in the

PowerShield range but still packs a lot of power due

to an increased 9 amp hour battery in every unit. It is

designed to support computer power supplies that have

either Passive or Active Power Factor Corrected power

supplies. Furthermore it has been designed to protect

these Power Factor Corrected power supply units at full

load rating and at all phase angles.

applications include:•smallofficeandhomeofficeequipment

•standalonepersonalcomputers

•workstations

•smallperipherals

COMPUGUARD

MODEL PSCG650

CAPACITY 650VA / 390W

INPUT

Voltage 240Vac (Nominal)

Acceptable Voltage Range 180 - 270 VAC

Voltage Range

Low Line Transfer 180 ± 5 %

Low Line Comeback 190 ± 5%

High Line Transfer 270 ± 5%

High Line Comeback 260 ± 5%

Frequency 50Hz or 60Hz (Auto sensing)

OUTPUT

Output Voltage (Batt. Mode) 240 VAC ± 10%

Frequency Range (Batt. Mode) 50Hz or 60Hz ± 1Hz

Transfer Time (Typical) 2~6 ms

Waveform (Batt. Mode) Simulated sine wave

Australian Outlets - UPS Protection 2

Australian Outlets - Surge Protection 1

BATTERY

Battery 12 V* 9AH

Backup Time (one-PC load @100W) 25 min.

Typical Recharge Time 8 hours recover to 90% capacity

PROTECTION

Full Protection Overcharge, discharge, short circuit, and thermal protection

Safety EN62040-1-1 2003, IEC60950-1:2001

EMC EN62040-2 2006

COMMUNICATIONS & MANAGEMENT

USB Interface PowerShield NetGuard Supports Windows®, Linux, Unix, and MAC

INDICATIONS

AC Mode Green LED illuminated

Battery Mode Green flashing LED every 10 seconds

Low Battery (Batt. Mode) Green flashing LED every second

Fault Red LED illuminated

ALARM

Battery Mode 2 beeps every 30 seconds

Low Battery (Batt. Mode) Sounding every second

Fault Continuously sounding

PHYSICAL

Dimension, D x W x H (@ vertically stand) (232 x 83 x 200)mm

Net Weight (kgs) 3.6

OPERATING ENVIRONMENT

Humidity 0-90 %

Temerature 0- 40°C (non-condensing)

* Product specifications are subject to change without further notice* Product not intended for servers.

CircuitBreaker

7A

SurgeProtection

UPS+

SurgeProtection

Compuguard Series


CompuGuard

features• Designed specifically to protect todays modern computer

• Unique inverter design allows it to support the most severe Active Power

Factor Corrected power supply units

• Compact size

• Sleak tower design can stand vertically next to your computer

• Low profile design lies flat and you can even put your monitor on top

• Flush wall design for mounting to wall or under desk

• Excellent microprocessor control guarantees high reliability

• Auto restart while AC is recovering

• Cold start function

• Full protection: Discharge, overcharge, short circuit,

and thermal protection

The sophisticated CompuGuard UPS is PowerShield’s

latest development and has been designed by our

engineers specifically to protect today’s modern

computer. This low cost, slimline UPS has three Australian

sockets, two for battery backup and one for surge

protection. This UPS has the smallest footprint in the

PowerShield range but still packs a lot of power due

to an increased 9 amp hour battery in every unit. It is

designed to support computer power supplies that have

either Passive or Active Power Factor Corrected power

supplies. Furthermore it has been designed to protect

these Power Factor Corrected power supply units at full

load rating and at all phase angles.

applications include:•smallofficeandhomeofficeequipment

•standalonepersonalcomputers

•workstations

•smallperipherals

COMPUGUARD

MODEL PSCG650

CAPACITY 650VA / 390W

INPUT

Voltage 240Vac (Nominal)

Acceptable Voltage Range 180 - 270 VAC

Voltage Range

Low Line Transfer 180 ± 5 %

Low Line Comeback 190 ± 5%

High Line Transfer 270 ± 5%

High Line Comeback 260 ± 5%

Frequency 50Hz or 60Hz (Auto sensing)

OUTPUT

Output Voltage (Batt. Mode) 240 VAC ± 10%

Frequency Range (Batt. Mode) 50Hz or 60Hz ± 1Hz

Transfer Time (Typical) 2~6 ms

Waveform (Batt. Mode) Simulated sine wave

Australian Outlets - UPS Protection 2

Australian Outlets - Surge Protection 1

BATTERY

Battery 12 V* 9AH

Backup Time (one-PC load @100W) 25 min.


PROTECTION

Full Protection Overcharge, discharge, short circuit, and thermal protection

Safety EN62040-1-1 2003, IEC60950-1:2001

EMC EN62040-2 2006


USB Interface PowerShield NetGuard Supports Windows®, Linux, Unix, and MAC

INDICATIONS

AC Mode Green LED illuminated

Battery Mode Green flashing LED every 10 seconds

Low Battery (Batt. Mode) Green flashing LED every second

Fault Red LED illuminated

ALARM

Battery Mode 2 beeps every 30 seconds

Low Battery (Batt. Mode) Sounding every second


PHYSICAL

Dimension, D x W x H (@ vertically stand) (232 x 83 x 200)mm

Net Weight (kgs) 3.6


Humidity 0-90 %

Temerature 0- 40°C (non-condensing)

* Product specifications are subject to change without further notice* Product not intended for servers.

CircuitBreaker

7A

SurgeProtection

UPS+

SurgeProtection

R&D Technology Pty Ltd Specialised Engineering ProductsNewcastle P: +61 2 4014 9000 F: + 612 4014 9099

Brisbane P: +61 7 3846 2644 F: + 61 7 3846 2346Wollongong P: +61 2 4285 9978 F: + 61 2 4285 9989Gloucester P: +61 2 6558 2986 F: + 61 2 4014 9099

Regional QLD P: +61 7 4952 3833 F: + 61 2 4014 9099E: [email protected]

website: www.rdtechnology.com.au



Newcastle P: +61 2 4014 9000 F: + 61 2 4014 9099

Brisbane P: +61 7 3846 2644 F: + 61 7 3846 2346

Wollongong P: +61 2 4285 9978 F: + 61 2 4285 9989Gloucester P: +61 2 6558 2986 F: + 61 2 4014 9099

Regional QLD P: +61 7 4952 3833 F: + 61 2 4014 9099E: [email protected] website: www.rdtechnology.com.au

E: [email protected]: www.powerhousesystems.com.au


PowerhouseSystems



Newcastle P: +61 2 4014 9000 F: + 61 2 4014 9099Wollongong P: +61 2 4285 9978 F: + 61 2 4285 9989

Gloucester P: +61 2 6558 2986 F: + 61 2 4014 9099Regional QLD P: +61 7 4952 3833 F: + 61 2 4014 9099



Group Company

PowerhouseSystems


Small telephone with 4 handsets 60 minutes

Medium telephone with 16 hand sets 23 minutes

DVR and 4 cameras 62 minutes


Computer with 17” LCD monitor 17 minutes


Typical run Times

SIX S CKETS

SPECIFICATIONS PSG750

Model PSG750

Topology Line interactive

INPUT

Voltage 240Vac

Voltage range 177Vac to 290Vac

Frequency 50Hz

OUTPUT

Nominal voltage 240Vac

Voltage regulation +/-10%

Battery transfer time 6 msec ( typical )

VA/Wattage 750VA/450W

BATTERY

Type Sealed lead acid maintenance free battery

Capacity 12V/9Ah

Full load backup time 2.5 min

Data protection Tel/modem/Lan, RJ45 connector

Software PowerShield NetGuard for Windows, Linux & Mac

Interface USB interface

Audible noise


Small telephone with 4 handsets 60 minutes

Medium telephone with 16 hand sets 23 minutes





Typical run Times

SIX S CKETS

SPECIFICATIONS PSG750

Model PSG750

Topology Line interactive

INPUT

Voltage 240Vac

Voltage range 177Vac to 290Vac

Frequency 50Hz

OUTPUT

Nominal voltage 240Vac

Voltage regulation +/-10%

Battery transfer time 6 msec ( typical )

VA/Wattage 750VA/450W

BATTERY

Type Sealed lead acid maintenance free battery

Capacity 12V/9Ah

Full load backup time 2.5 min

Data protection Tel/modem/Lan, RJ45 connector

Software PowerShield NetGuard for Windows, Linux & Mac

Interface USB interface

Audible noise


DEFENDER LINE INTERACTIVE UPSMODEL PSD1200 PSD1600

CAPACITY 1200 VA / 720 W 1600 VA / 960 W

INPUT

Voltage (Nominal) 240 VAC (Australia)

Voltage Range 177-290 VAC

Frequency Range 50/60 Hz +/-5Hz (auto sensing)

OUTPUT

Output Voltage 240Vac Australia

Output Voltage Regulation 240Vac±10%

Frequency AC mode tracks utility. Battery Mode 50Hz+/-1%

Frequency Range (Batt. Mode) 50 Hz or 60 Hz ±1 Hz

Transfer Time Typical 2-6 ms, 10ms max.

Waveform (Batt. Mode) Simulated Sine Wave

Australian Outlets - UPS Protection 3 3

Australian Outlets - Surge Protection 3 3

BATTERY

Battery Type & Number 12V*7AH (x2) 12V*9AH (x2)

Backup Time (One PC load @ 120 W) 40 min. 45 min.

Typical Recharge Time 4-6 hours recover to 90% capacity

PROTECTION

Full Protection Overload, discharge, and overcharge protection

Safety EN62040-1-1 2003, IEC60950-1:2001

EMC EN62040-2 2006


USB interace PowerShield NetGuard Supports Windows®, Linux, Unix, and MAC

Smart LCD

AUDIBLE ALARM

Battery Mode 2 beeps every 30 secs

Low Battery Rapid Beep (one sec intervals)

Overload Constant Beeping

Battery Replacement Alarm Constant Beeping

Fault Constant Beeping


Humidity 0-90 % RH @ 0-40°C (non-condensing)

Noise Level Less than 40dB

PHYSICAL

Dimension, D X W X H (mm) 397 x 146 x 205

Net Weight (kgs) 11.1 11.5

* Product specifications are subject to change without further notice

1. Input voltage2. Output voltage3. AC mode indicator4. Battery mode indicator5. Load level indicator, flashing indicates overload6. Battery capacity indicator, flashing indicates low battery level

1 23

456

Defender Range

features• Excellentmicroprocessorcontrolguaranteeshighreliability

• AustralianoutletsforUPSProtection(x3)

• AustralianoutletsforSurgeprotection(x3)

• BoostandbuckAVRforvoltagestabilization

• Userreplaceablebatteries

• SilentOperation(Nofansincluded)

• AutorestartswhileACisrecovering

• Off-modecharging

• Coldstartfunction

• USBcommunicationwithsophisticatedNetGuardsoftware

TheDefenderrangeusesAutomaticVoltageRegulation

(AVR) tominimisefluctuations in inputvoltage.TheUPS

takes this inconsistent voltage then provides clean,

consistent output for the equipment it protects. AVR

keeps your business running through even the most

frequent brownouts and power sags.

applications include:•homeofficeequipment

•workstations

•rackequipment

•pointofsaleequipment

Defender Series


DEFENDER LINE INTERACTIVE UPSMODEL PSD1200 PSD1600

CAPACITY 1200 VA / 720 W 1600 VA / 960 W

INPUT

Voltage (Nominal) 240 VAC (Australia)

Voltage Range 177-290 VAC

Frequency Range 50/60 Hz +/-5Hz (auto sensing)

OUTPUT

Output Voltage 240Vac Australia

Output Voltage Regulation 240Vac±10%

Frequency AC mode tracks utility. Battery Mode 50Hz+/-1%

Frequency Range (Batt. Mode) 50 Hz or 60 Hz ±1 Hz


Waveform (Batt. Mode) Simulated Sine Wave

Australian Outlets - UPS Protection 3 3

Australian Outlets - Surge Protection 3 3

BATTERY

Battery Type & Number 12V*7AH (x2) 12V*9AH (x2)

Backup Time (One PC load @ 120 W) 40 min. 45 min.

Typical Recharge Time 4-6 hours recover to 90% capacity

PROTECTION


Safety EN62040-1-1 2003, IEC60950-1:2001

EMC EN62040-2 2006


USB interace PowerShield NetGuard Supports Windows®, Linux, Unix, and MAC

Smart LCD

AUDIBLE ALARM

Battery Mode 2 beeps every 30 secs

Low Battery Rapid Beep (one sec intervals)

Overload Constant Beeping

Battery Replacement Alarm Constant Beeping

Fault Constant Beeping


Humidity 0-90 % RH @ 0-40°C (non-condensing)


PHYSICAL

Dimension, D X W X H (mm) 397 x 146 x 205

Net Weight (kgs) 11.1 11.5


1. Input voltage2. Output voltage3. AC mode indicator4. Battery mode indicator5. Load level indicator, flashing indicates overload6. Battery capacity indicator, flashing indicates low battery level

1 23

456

Defender Range

features• Excellentmicroprocessorcontrolguaranteeshighreliability

• AustralianoutletsforUPSProtection(x3)

• AustralianoutletsforSurgeprotection(x3)

• BoostandbuckAVRforvoltagestabilization

• Userreplaceablebatteries

• SilentOperation(Nofansincluded)

• AutorestartswhileACisrecovering

• Off-modecharging

• Coldstartfunction

• USBcommunicationwithsophisticatedNetGuardsoftware

TheDefenderrangeusesAutomaticVoltageRegulation

(AVR) tominimisefluctuations in inputvoltage.TheUPS

takes this inconsistent voltage then provides clean,

consistent output for the equipment it protects. AVR

keeps your business running through even the most

frequent brownouts and power sags.

applications include:•homeofficeequipment

•workstations

•rackequipment

•pointofsaleequipment



Newcastle P: +61 2 4014 9000 F: + 61 2 4014 9099

Brisbane P: +61 7 3846 2644 F: + 61 7 3846 2346





PowerhouseSystems







Group Company

PowerhouseSystems


Commander RT

features• Pure sine wave output

• Rack/Tower design

• Microprocessor-based line interactive design

• Built-in boost and buck AVR

• Output power factor 0.8

• Programmable power management outlets

• ECO mode operation for energy saving (ECO)

• Emergency Power Off Function (EPO)

• Hot-swappable battery design

• Long-run models available

• Multiple communication available • User-friendly and easy-s

LCD display

With pure sine wave output, the Commander

Rackmount Tower guarantees compatibility for all kinds

of loads. It’s perfect power protection for versatile

applications such as networking, telecom and other

mission-critical applications.

The ECO mode function allows cost-effective

operation of UPS Systems as high as 98%. In this

operation mode, load is supplied by the mains.

In the event of a mains failure, the inverter takes

over the load and provides supply continuity to the

connected systems.

To provide longer backup time the 2kVA and 3kVA

models are expandable to include an additional

battery bank.

Multiple communication available

- USB port

- RS-232 port

- SNMP slot (option)

- AS400 card (option)

- PowerShield NetGuard® software included

Commander Rack Tower


Commander rT BaTTerY BanKS

modeL PSCrT800 PSCrT1100 PSCrT2000 PSCrT3000 PSCrTBB8 PSCrTBB12

CAPACITY 800VA/640 W 1100VA/880W 2000VA/1600W 3000VA/2400W Suits PSCRT2000 only Suits PSCRT3000 only

InPUT

Input voltage range 162-290 VAC

frequency range 50/60 Hz (auto sensing) +/-5Hz

oUTPUT

Voltage Regulation (AC Mode) 240Vac (Selectable208/220/230Vac) +/-10% AVR

Voltage Regulation (Batt. Mode) ±3% (before battery alarm)

Frequency Range (Batt. Mode) 50 Hz or 60 Hz ± 1 Hz

Current Crest Ratio 3:1

Harmonic Distortion 5% max @ 100% linear load, 10% max @ 100% non-linear load (before alarm)


Waveform (Batt. Mode) Pure Sine Wave

eFFICIenCY

ECO Mode 97% 97% 97%

Buck & Boost Mode 90% 90% 90%

Battery Mode 83% 89% 87%

eFFICIenCY

Standard Model

Battery Type & Number 12 V*9Ah x 2 12 V*9Ah x 2 12 V*9Ah x 4 12 V*9Ah x6 12 V*9Ah x 8 12 V*9Ah x 12


Additional Battery Banks N/A N/A PSCRTBB8 (x1) PSCRTBB12 (x1)

IndICaTorS

LCD Display AC Mode, Battery Mode, Load Level, Input Voltage, Output Voltage, Overload, Fault, and Low Battery, Battery time remaining

ProTeCTIon


aLarm

Battery Mode Sounding 2 beeps every 30 seconds

Low Battery Sounding 1 beep every second

Overload Sounding 2 beeps every 2 seconds


PHYSICaL

Standard Model

Dimension DxWxH (mm) 380 x 438 x 88 600 x 438 x 88 380 x 438 x 88 600 x 438 x 88

Net/Gross weight (kg) 15/16 15/16 23/25 32/35 25/27 35/37

envIronmenT

Operating Humidity 0-90 % RH @ 0- 40°C (non-condensing)


manaGemenT

Smart RS232PowerShield NetGuard® software - supports Windows based operating systems, Linux, Unix

USB

Optional SNMP Power management from SNMP manager and web browser (Intelligent Slot)

Optional AS400 AS400 dry contact communication card (intelligent Slot)

PSCRT3000PSCRT800/1100/2000

w w w . p o w e r s h i e l d . c o m . a u







Group Company

PowerhouseSystems


Software/SNMP

Allows control and monitoring of multiple

UPSs via LAN and INTERNET

User-friendly power analysis graph: event

statistics, history data chart export

Real-time dynamic graphs of UPS data

(voltage, frequency, load level,

battery level)

Safely OS shutdown and protection from

data loss during power failure

Warningnotificationsviaaudiblealarm,

broadcast, mobile messenger, and e-mail

Scheduled UPS on/off, battery test, programmable

outlet control, and audible alarm control

Password security protection and remote

access management

Supports multiple languages

Bundled with the PowerShield CompuGuard, SafeGuard,

New Defender and Centurion Series is the NetGuard

UPS management software. Users can remotely monitor

and manage from one to multiple UPSs in a networked

environment, either LAN or over the INTERNET. It prevents

data loss from power outage by safely shutting down

systems avoiding hard shutdowns. Also this software has

the ability to store programming data and schedule

shutdown UPSs.

This new version allows remote control and monitoring for

multiple UPSs via networked environment. Besides, it also

provides event statistic and power flow information in

diagram for corporate MIS to analyse the power status. To

avoid outside hackers, it also provides password security

protection for control and management.

PSCSNMP Simple Network Management Protocol card that allows for remote monitoring and shutdown of UPSs over the internet. This unit is especially designed for the

Commander tower and rackmount range.

PSCESNMP Simple Network Management Protocol card that allows for remote monitoring and shutdown of UPSs over the internet. This unit is especially designed for the

Centurion tower and rackmount range.

PSCSNMPee Simple Network Management Protocol card that allows for remote monitoring and shutdown of UPSs over the internet. This unit is especially designed to

take an environmental monitoring plugin that allows the user to monitor temperature,

humidity, opening and closing of server room doors and windows.

AS400For an easy connection to dry contacts featured in manufacturing applications and

building management systems, the AS400 card can be inserted into the backs of both

the Commander and Centurion Ranges.

The PowerShield Commander, Centurion, Centurion 3/1 and the

Platinum have in-built facilities for a Simple Network Management

Protocol (SNMP) card. These cards offer remote access of the

UPS anywhere where there is internet access. No PC is required

to access the UPS as it has its own LAN connection with a unique

IP address.

NetAgent Mini is an ultra-compact, light and fast tool to remotely

monitor and manage any UPS system. It can perform multi-servers

shutdown with ClientMate (Freeware for Windows, Linux and

FreeBSDOS),auto-sendnotifications,displayreal-timeinput-output

status, battery status, current UPS temperature and much more.

NetAgent II is also a tool to remotely monitor and manage any

Commander, Centurion or Platinum system. In addition, to the

features of the NetAgent Mini, the NetAgent II has the option to

add NetFeeler Lite to detect temperature, humidity, smoke and

security sensors, making the NetAgent II a versatile management

tool. Like the Mini, the NetAgent II also supports multiple languages

and is setup for web-based auto language detection.

SNMPSoftwarefeatures

UPS Software


Software/SNMP

Allows control and monitoring of multiple

UPSs via LAN and INTERNET

User-friendly power analysis graph: event

statistics, history data chart export

Real-time dynamic graphs of UPS data

(voltage, frequency, load level,

battery level)

Safely OS shutdown and protection from

data loss during power failure

Warningnotificationsviaaudiblealarm,

broadcast, mobile messenger, and e-mail

Scheduled UPS on/off, battery test, programmable

outlet control, and audible alarm control

Password security protection and remote

access management

Supports multiple languages

Bundled with the PowerShield CompuGuard, SafeGuard,

New Defender and Centurion Series is the NetGuard

UPS management software. Users can remotely monitor

and manage from one to multiple UPSs in a networked

environment, either LAN or over the INTERNET. It prevents

data loss from power outage by safely shutting down

systems avoiding hard shutdowns. Also this software has

the ability to store programming data and schedule

shutdown UPSs.

This new version allows remote control and monitoring for

multiple UPSs via networked environment. Besides, it also

provides event statistic and power flow information in

diagram for corporate MIS to analyse the power status. To

avoid outside hackers, it also provides password security

protection for control and management.

PSCSNMP Simple Network Management Protocol card that allows for remote monitoring and shutdown of UPSs over the internet. This unit is especially designed for the

Commander tower and rackmount range.

PSCESNMP Simple Network Management Protocol card that allows for remote monitoring and shutdown of UPSs over the internet. This unit is especially designed for the

Centurion tower and rackmount range.

PSCSNMPee Simple Network Management Protocol card that allows for remote monitoring and shutdown of UPSs over the internet. This unit is especially designed to

take an environmental monitoring plugin that allows the user to monitor temperature,

humidity, opening and closing of server room doors and windows.

AS400For an easy connection to dry contacts featured in manufacturing applications and

building management systems, the AS400 card can be inserted into the backs of both

the Commander and Centurion Ranges.

The PowerShield Commander, Centurion, Centurion 3/1 and the

Platinum have in-built facilities for a Simple Network Management

Protocol (SNMP) card. These cards offer remote access of the

UPS anywhere where there is internet access. No PC is required

to access the UPS as it has its own LAN connection with a unique

IP address.

NetAgent Mini is an ultra-compact, light and fast tool to remotely

monitor and manage any UPS system. It can perform multi-servers

shutdown with ClientMate (Freeware for Windows, Linux and

FreeBSDOS),auto-sendnotifications,displayreal-timeinput-output

status, battery status, current UPS temperature and much more.

NetAgent II is also a tool to remotely monitor and manage any

Commander, Centurion or Platinum system. In addition, to the

features of the NetAgent Mini, the NetAgent II has the option to

add NetFeeler Lite to detect temperature, humidity, smoke and

security sensors, making the NetAgent II a versatile management

tool. Like the Mini, the NetAgent II also supports multiple languages

and is setup for web-based auto language detection.

SNMPSoftwarefeatures



Newcastle P: +61 2 4014 9000 F: + 61 2 4014 9099

Brisbane P: +61 7 3846 2644 F: + 61 7 3846 2346





PowerhouseSystems







Group Company

PowerhouseSystems


features• TrueOnlineDoubleConversion

• Wideinputvoltagerange(110-300VAC)

• Inputpowerfactorcorrection0.98

• 50Hz/60Hzfrequencyconvertermode

• Programmablepoweroutlets

• Emergencypowerofffunction(EPO)

• OptionalEco-modeoperationforenergysaving

• Generatorcompatible

• Backuptimeforallmodelsiseasilyextendedbysimplypluggingadditionalbatterybanks

• Batterybanksareavailablewithinternalchargertoenablefastrechargeevenwithlargebatterybanks

• Chargercapacityexpansionto9Aforlong-runmodels

• USB,RS232,SNMPandAS400multiplecommunicationsavailalble

• Externalmaintenancebypassavailableforallmodels

• N+Xparallelredundancyavailablefor6K/10Kmodels

• MonitoringandShutdownSoftwareincluded

Centurion Tower

The Centurion is designed to protect critical computer

and communications equipment as well as industrial and

automation applications where losses as a result of power

failure may accumulate at frightening speed. A true online

double conversion UPS, the Centurian is designed to

guarantee trouble-free operation of protected equipment in

anyphysicalorsystemenvironment.Versatilemanagement

and hardware options offer the flexibility to build up a

power protection solution to fit any application. When

the mission is critical, get the best UPS in the PowerShield

range. This new range now comes with two sets of sockets

on the back. One row of output sockets are programmable

meaning that in times of limited backup time, the user can

program the sockets to turn off after a prescribed time. This

will leave valuable backup time to the equipment that is

most critical. The LCD display is amongst the easiest.

applications include:•criticalservers

•smallnetworks

•CriticalITapplications

•PLCs

•Telecomapplications

•securityequipment

•manufacturing

Centurion Tower

27www.powerhousesystems.com.au23

TOWER MODELS BATTERY BANKS

MODEL PSCEBB6 PSCEBB12 PSCEBB18CH PSCEBB40 PSCEBB60CH

SUITS UPS PSCE1000 PSCE2000/3000 PSCE2000/3000 PSCE6000/10K PSCE6000/10K

BATTERY

Type 12V*9AH 12V*9AH 12V*9AH 12V*9AH 12V*9AH

Number 6 12 18 40 60

Nominal DC 36Vdc 72Vdc 72Vdc 240Vdc 240Vdc

Charger From UPS From UPS Internal 3Amp From UPS Internal 3.5Amp

PHYSICAL

Dimensions (D x W x H)cm 397 x145 x 220 421 x 190 x 318 534 x 190 x 318 592 x 285 x 576 830 x 250 x 576

Weight N et/Gross KG 21/22Kg 42/44Kg 62/64Kg 125/132Kg 190/205Kg

PROTECTION DC Circuit breaker

VIRTUALLY UNLIMITED RUN TIMES CAN BE ACHIEVED BY ADDING BATTERY BANKS TO STANDARD MODELS

Notes: Unlimited Numbers of batteries banks can be added however it is recommended to add a Battery Bank that has an internal charger (PSCEBB18CH

or PSCEBB60CH) if large battery banks are added and fast charging is required. Usually these should be added as the second, third or fourth battery

bank depending on your requirements. When these battery banks with chargers are added, it is possible to substantially increase the number of regular

battery banks. The following battery banks have built-in chargers. These also have more batteries than regular battery banks. PSCEBB18CH - Suits 2k & 3K

• PSCEBB60CH - Suits 6k & 10K

VA LOAD MODEL

PSCE1000 PSCEBB6 PSCEBB6 PSCEBB6

1000VA 100% 12 minutes 45 minutes 80 minutes 115 minutes500VA 50% 25 minutes 105 minutes 170 minutes 250 minutes

PSCE2000 PSCEBB12 PSCEBB18CH PSCEBB12






PSCE10K PSCEBB40 PSCEBB60CH PSCEBB40

10KVA 100% 5 minutes 27 minutes 60 minutes 100 minutes5000VA 50% 16 minutes 60 minutes 145 minutes 205 minutes

MODEL PSCE1000 (L) PSCE2000 (L) PSCE3000 (L) PSCE6000 (L) PSCE10K (L)

CAPACITY 1000VA / 800W 2000VA / 1600W 3000 VA / 2400W 6000VA / 4800W 10000VA / 8000 W

INPUT

Voltage Range

Low Line Transfer 160 VAC / 140 VAC / 120 VAC / 110 VAC ± 5 % (based on load percentage 100% - 80 % / 80 % - 70 % / 70 - 60 % / 60 % - 0)

176 VAC @ 100% load110 VAC @ 50% load

Low Line Comeback 175 VAC ± 5 % 186 VAC @ 100% load120 VAC @ 50% load

High Line Transfer 300 VAC ± 5 % 300 VAC

High Line Comeback 47.5Hz ~ 52.5 Hz or 57Hz ~ 63Hz 290 VAC

Frequency Range 47.5Hz ~ 52.5 Hz or 57Hz ~ 63Hz 46~54 Hz ◎ 50Hz / 56~64Hz ◎ 60Hz

Phase Single phase with ground

Power Factor ◎ 0.98 ◎ 0.99 @ 100%load

OUTPUT

AC Voltage Regulation (Batt. Mode) ± 3% ± 1%

Frequency Range (Synchronized Range) 48 ~ 52 Hz or 57 ~ 63 Hz 46~54 Hz ◎ 50 Hz / 56~64 Hz ◎ 60 Hz

Frequency Range (Batt. Mode) 50 Hz ± 0.25 Hz or 60Hz ± 0.3 Hz 50 Hz ± 0.1 Hz or 60 Hz ± 0.1 Hz


Harmonic Distortion 3 % THD (Linear Load) 6 % THD (Non-linear Load)

◎ 4 % THD (Linear Load) ◎ 7 % THD (Non-linear Load)

◎ 2 % THD (Linear Load) ◎ 6 % THD (Linear Load)

Transfer Time

AC Mode to Batt. Mode Zero

Inverter to Bypass 4 ms (Typical) zero

Waveform (Batt. Mode) Pure Sinewave

EFFICIENCY

AC Mode 85% 88% 90%

Battery Mode 83% 88%

BATTERY

Standard Model

Battery Type 12 V / 9 AH 12 V / 9 AH 12 V / 9 AH 12 V / 9 AH 12 V / 9 AH

Numbers 3 6 6 20 20

Typical Recharge Time 4 hours recover to 90% capacity 7 hours recover to 90% capacity

7 hours recover to 90% capacity

Charging Current (max.) 1.0 A 1.0 A

Charging Voltage 41.0 VDC ± 1% 82.1 VDC ±1% 273.0 VDC

INDICATORS

LCD Panel UPS status, Load level, Battery level, Input/Output voltage, Discharge timer, and Fault conditions

LED Panel UPS status, Load level, Battery level, and Fault indicators

ALARM

Battery Mode Sounding every 4 seconds

Low Battery Sounding every second

Overload Sounding twice every second

Fault Continously sounding

PHYSICAL

Dimension, D X W X H (mm) 338.5 X 145 X 220 387 X 190 X 318 526 X 250 X 576.5

Net Weight (kgs) 14 7 29.5 16 29.5 16 90 35 93 38

ENVIRONMENT

Operation Humidity 20-90 % RH @ 0- 40°C (non-condensing)

Noise Level Less than 45dBA @ 1 Meter Less than 55dB @ 1 Meter

MANAGEMENT

Smart RS232PowerShield NetGuard Software - Supports Windows Based Operating Systems, Linux & Unix

USB


AS400 AS400 dry contact communication card (Intelligent Slot)

* L means long-run model


PSC

E100

0

PSC

E200

0

PSC

E300

0

PSC

E600

0

PSC

E100

00


23

TOWER MODELS BATTERY BANKS

MODEL PSCEBB6 PSCEBB12 PSCEBB18CH PSCEBB40 PSCEBB60CH

SUITS UPS PSCE1000 PSCE2000/3000 PSCE2000/3000 PSCE6000/10K PSCE6000/10K

BATTERY

Type 12V*9AH 12V*9AH 12V*9AH 12V*9AH 12V*9AH

Number 6 12 18 40 60

Nominal DC 36Vdc 72Vdc 72Vdc 240Vdc 240Vdc

Charger From UPS From UPS Internal 3Amp From UPS Internal 3.5Amp

PHYSICAL

Dimensions (D x W x H)cm 397 x145 x 220 421 x 190 x 318 534 x 190 x 318 592 x 285 x 576 830 x 250 x 576

Weight N et/Gross KG 21/22Kg 42/44Kg 62/64Kg 125/132Kg 190/205Kg


VIRTUALLY UNLIMITED RUN TIMES CAN BE ACHIEVED BY ADDING BATTERY BANKS TO STANDARD MODELS

Notes: Unlimited Numbers of batteries banks can be added however it is recommended to add a Battery Bank that has an internal charger (PSCEBB18CH

or PSCEBB60CH) if large battery banks are added and fast charging is required. Usually these should be added as the second, third or fourth battery

bank depending on your requirements. When these battery banks with chargers are added, it is possible to substantially increase the number of regular

battery banks. The following battery banks have built-in chargers. These also have more batteries than regular battery banks. PSCEBB18CH - Suits 2k & 3K

• PSCEBB60CH - Suits 6k & 10K

VA LOAD MODEL

PSCE1000 PSCEBB6 PSCEBB6 PSCEBB6








PSCE10K PSCEBB40 PSCEBB60CH PSCEBB40

10KVA 100% 5 minutes 27 minutes 60 minutes 100 minutes5000VA 50% 16 minutes 60 minutes 145 minutes 205 minutes

MODEL PSCE1000 (L) PSCE2000 (L) PSCE3000 (L) PSCE6000 (L) PSCE10K (L)

CAPACITY 1000VA / 800W 2000VA / 1600W 3000 VA / 2400W 6000VA / 4800W 10000VA / 8000 W

INPUT

Voltage Range

Low Line Transfer 160 VAC / 140 VAC / 120 VAC / 110 VAC ± 5 % (based on load percentage 100% - 80 % / 80 % - 70 % / 70 - 60 % / 60 % - 0)

176 VAC @ 100% load110 VAC @ 50% load



High Line Comeback 47.5Hz ~ 52.5 Hz or 57Hz ~ 63Hz 290 VAC

Frequency Range 47.5Hz ~ 52.5 Hz or 57Hz ~ 63Hz 46~54 Hz ◎ 50Hz / 56~64Hz ◎ 60Hz


Power Factor ◎ 0.98 ◎ 0.99 @ 100%load

OUTPUT


Frequency Range (Synchronized Range) 48 ~ 52 Hz or 57 ~ 63 Hz 46~54 Hz ◎ 50 Hz / 56~64 Hz ◎ 60 Hz



Harmonic Distortion 3 % THD (Linear Load) 6 % THD (Non-linear Load)

◎ 4 % THD (Linear Load) ◎ 7 % THD (Non-linear Load)

◎ 2 % THD (Linear Load) ◎ 6 % THD (Linear Load)

Transfer Time

AC Mode to Batt. Mode Zero

Inverter to Bypass 4 ms (Typical) zero

Waveform (Batt. Mode) Pure Sinewave

EFFICIENCY

AC Mode 85% 88% 90%

Battery Mode 83% 88%

BATTERY

Standard Model

Battery Type 12 V / 9 AH 12 V / 9 AH 12 V / 9 AH 12 V / 9 AH 12 V / 9 AH

Numbers 3 6 6 20 20

Typical Recharge Time 4 hours recover to 90% capacity 7 hours recover to 90% capacity

7 hours recover to 90% capacity

Charging Current (max.) 1.0 A 1.0 A

Charging Voltage 41.0 VDC ± 1% 82.1 VDC ±1% 273.0 VDC

INDICATORS

LCD Panel UPS status, Load level, Battery level, Input/Output voltage, Discharge timer, and Fault conditions

LED Panel UPS status, Load level, Battery level, and Fault indicators

ALARM

Battery Mode Sounding every 4 seconds

Low Battery Sounding every second

Overload Sounding twice every second

Fault Continously sounding

PHYSICAL

Dimension, D X W X H (mm) 338.5 X 145 X 220 387 X 190 X 318 526 X 250 X 576.5

Net Weight (kgs) 14 7 29.5 16 29.5 16 90 35 93 38

ENVIRONMENT

Operation Humidity 20-90 % RH @ 0- 40°C (non-condensing)

Noise Level Less than 45dBA @ 1 Meter Less than 55dB @ 1 Meter

MANAGEMENT

Smart RS232PowerShield NetGuard Software - Supports Windows Based Operating Systems, Linux & Unix

USB


AS400 AS400 dry contact communication card (Intelligent Slot)

* L means long-run model


PSC

E100

0

PSC

E200

0

PSC

E300

0

PSC

E600

0

PSC

E100

00



Newcastle P: +61 2 4014 9000 F: + 61 2 4014 9099

Brisbane P: +61 7 3846 2644 F: + 61 7 3846 2346





PowerhouseSystems







Group Company

PowerhouseSystems


features• Truedouble-conversion

• Wideinputvoltagerange(110-300VAC)

• Inputpowerfactorcorrection0.98

• 50Hz/60Hzfrequencyconvertermode

• Programmablepoweroutlets

• Emergencypowerofffunction(EPO)

• Eco-modeoperationforenergysaving(ECO)

• Generatorcompatible

• Backuptimeforallmodelsiseasilyextendedbysimplypluggingadditionalbatterybanks

• Chargercapacityexpansionto8Aforlong-runmodels

• USB+RS232+SNMP+AS400multiplecommunications

• Maintenancebypassavailableforallmodels

• N+Xparallelredundancyavailablefor6K/10Kmodels

Centurion Rackmount

The Centurion resolves utility power problems and delivers

superior power to equipment requiring critical power.

As a True Online Double-conversion UPS, the UPS takes

the AC signal, converts it to DC and then back to AC,

thus eliminating any noise or electrical interference and

delivering perfect 240 voltage and 50 Amps frequency to

all equipment. It is this seamless transfer to batteries that will

continue to feed equipment even after the front half of the

UPS has failed or if there is a mains fail.

The Centurion Rack comes complete with NetGuard

software to enable the UPS to softly shutdown the system

after a prescribed amount of time designated by the user.

The Centurion Rackmount, like its Tower counterpart, also

has programmable sockets on the back so that the user

may get more backup on more critical equipment. SNMP

and AS400 card slots are present on the back of the unit for

remote management and dry contact communications.

applications include:•manufacturing

•serversandnetworkinggear

•telecommunications,VoIPandsecuritysystems

•medicalsystems

•Miningapplications

Centurion Rackmount


MODEL PSCERBB6 PSCERBB12 PSCERBB20

SUITS UPS PSCER1000 PSCER2000/3000 PSCER6000L/10KL

BATTERY

Type 12V*9AH 12V*9AH 12V*9AHNumber 6 12 20Nominal DC 36Vdc 72Vdc 240Charger From UPS From UPS From UPS

PHYSICAL

Dimensions (D x W x H)cm 420 X 438 X 88 (2U) 580 X 438 X 133 (3U) 580 X 438 X 133 (3U)Weight Nett/Gross KG 21Kg 37Kg 57Kg


LOAD VA

PSCER1000 Internal Batteries 1x PSCERBB6 2 x PSCERBB6 3 x PSCERBB6

1000VA 12 45 80 115500VA 25 105 170 250

PSCER2000 1x PSCERBB12 2 x PSCERBB12 3 x PSCERBB12

2000VA 12 50 90 1151000VA 25 110 170 250


3000VA 5 27 50 801500VA 16 60 110 170

PSCE6000 1x PSCERBB20 2x PSCERBB20 3x PSCERBB20

6000VA 12 30 553000VA 30 85 120

PSCE10K 1x PSCERBB20 2x PSCERBB20 3x PSCERBB20

10KVA 5 16 285000VA 16 38 60

MODEL PSCER1000 (L) PSCER2000 (L) PSCER3000 (L) PSCER6000L PSCER10KL

CAPACITY 1000 VA / 800 W 2000 VA / 1600 W 3000 VA / 2400 W 6000 VA / 4800 W 10000 VA / 8000 W

INPUT

Voltage Range

Low Line Transfer 160 VAC / 140 VAC / 120 VAC / 110 VAC ± 5 % ( based on load percentage 100% - 80 % / 80 % - 70 % / 70 - 60 % / 60 % - 0)

176 VAC @ 100% load110 VAC @ 50% load



High Line Comeback 290 VAC ± 5 % 290 VAC

Frequency Range 47.5Hz ~ 52.5 Hz or 57Hz ~ 63 Hz 46-54 Hz or 56-64 Hz


Power Factor ≧ >0.98 ≧ >0.99 @ >100% load

OUTPUT

Voltage (selectable) 240Vac (Selectable 208,220,230Vac)


Frequency Range (Synchronized Range) 47 ~ 53 Hz or 57 ~ 63 Hz 46~54 Hz or 56~64 Hz



Harmonic Distortion


MODEL PSCERBB6 PSCERBB12 PSCERBB20

SUITS UPS PSCER1000 PSCER2000/3000 PSCER6000L/10KL

BATTERY

Type 12V*9AH 12V*9AH 12V*9AHNumber 6 12 20Nominal DC 36Vdc 72Vdc 240Charger From UPS From UPS From UPS

PHYSICAL

Dimensions (D x W x H)cm 420 X 438 X 88 (2U) 580 X 438 X 133 (3U) 580 X 438 X 133 (3U)Weight Nett/Gross KG 21Kg 37Kg 57Kg


LOAD VA

PSCER1000 Internal Batteries 1x PSCERBB6 2 x PSCERBB6 3 x PSCERBB6

1000VA 12 45 80 115500VA 25 105 170 250


2000VA 12 50 90 1151000VA 25 110 170 250


3000VA 5 27 50 801500VA 16 60 110 170

PSCE6000 1x PSCERBB20 2x PSCERBB20 3x PSCERBB20

6000VA 12 30 553000VA 30 85 120

PSCE10K 1x PSCERBB20 2x PSCERBB20 3x PSCERBB20

10KVA 5 16 285000VA 16 38 60

MODEL PSCER1000 (L) PSCER2000 (L) PSCER3000 (L) PSCER6000L PSCER10KL

CAPACITY 1000 VA / 800 W 2000 VA / 1600 W 3000 VA / 2400 W 6000 VA / 4800 W 10000 VA / 8000 W

INPUT

Voltage Range

Low Line Transfer 160 VAC / 140 VAC / 120 VAC / 110 VAC ± 5 % ( based on load percentage 100% - 80 % / 80 % - 70 % / 70 - 60 % / 60 % - 0)

176 VAC @ 100% load110 VAC @ 50% load



High Line Comeback 290 VAC ± 5 % 290 VAC

Frequency Range 47.5Hz ~ 52.5 Hz or 57Hz ~ 63 Hz 46-54 Hz or 56-64 Hz


Power Factor ≧ >0.98 ≧ >0.99 @ >100% load

OUTPUT

Voltage (selectable) 240Vac (Selectable 208,220,230Vac)


Frequency Range (Synchronized Range) 47 ~ 53 Hz or 57 ~ 63 Hz 46~54 Hz or 56~64 Hz



Harmonic Distortion


Centurion 3/1

features• True double-conversion

• DSP technology guarantees high performance

• Wide input voltage range (110-300 VAC)

• Input power factor correction in all phases

• 50Hz/60Hz frequency converter mode

• Eco mode operation for energy saving (ECO)

• Programmable power outlets

• Emergency power off function (EPO)

• Generator compatible

• All models are Long Run

• USB+RS232 + SNMP + AS400 multiple communications

• Maintenance bypass available

• N+X parallel redundancy available

CENTURION 1G THREE PHASE/SINGLE PHASE SELECTION GUIDE

MODEL PSCE10KL3/1 PSCE15KL3/1 PSCE20KL3/1CAPACITY 10000 VA / 8000 W 15000 VA / 12000 W 20000 VA / 16000 WINPUTPhase Three Phase in/One Phase Out or One Phase in/One Phase out (User selectable)Voltage (Nominal) 240/415Vac (User Selectable)

Voltage Range

Low Line Transfer 176 VAC (phase voltage)@ 100% load110VAC (phase voltage) @ 50% load

Low Line Comeback 186 VAC (phase voltage) @ 100% load120VAC (phase voltage) @ 50% load

High Line Transfer 276 VAC (phase voltage) @ 100% load300VAC (phase voltage) @ 50% load

High Line Comeback 266 VAC (phase voltage) @ 100% load290VAC (phase voltage) @ 50% load

Frequency Range 46~54 Hz or 56~64Hz Power Factor ≧ 0.99 @ 100% loadTHDi < 6% @ 100% loadOUTPUTVoltage (ac mode) 240Vac (220, 230Vac User Selectable)AC Voltage Regulation (Batt. Mode) ± 1%Frequency Range (Synchronized Range) 46~54Hz or 56~64HzFrequency Range (Batt. Mode) 50 Hz ± 0.1 Hz or 60 Hz ± 0.1 HzCurrent Crest Ratio 3:1 (max.)

Harmonic Distortion ≧ 2 % THD (Linear Load) 5 % THD (Non-linear Load)

Transfer TimeAC Mode to Batt. Mode zeroInverter to Bypass zero

Waveform (Batt. Mode) Pure Sine WaveEFFICIENCYAC Mode 89%Battery Mode 86% 88% 87%BATTERY

Standard Model

Battery Type 12 V / 9 AHNumbers 20 40 40Typical Recharge Time 9 hours recover to 90% capacity 9 hours recover to 90% capacityCharging Current (max.) 1A 2A 2ACharging Voltage 273Vdc

Long-run Model

Battery TypeDepending on the capacity of external batteries

NumbersCharging Current (max.) 4A 8A 8ACharging Voltage 273Vdc

INDICATORSLCD Panel UPS status, Load level, Battery level, Input/Output voltage, Discharge timer, and Fault conditionsALARMBattery Mode Sounding every 4 secondsLow Battery Sounding every secondOverload Sounding twice every secondFault Continuously soundingPHYSICAL

Standard ModelDimension, D X W X H (mm) 592 X 250 X 576 815 x 250 x 826Net Weight (kgs) 83 164 164

Long-run ModelDimension, D X W X H (mm) 592 X 250 X 576 592 X 250 X 576 592 X 250 X 576Net Weight (kgs) 28 37 37

ENVIRONMENTOperation Humidity 0-95 % RH @ 0- 40°C (non-condensing)Noise Level Less than 58dB @ 1 MeterMANAGEMENTSmart RS232

PowerShield NetGuard software supports Windows, Linux, Unix, and MACUSBOptional SNMP Power management from SNMP manager and web browser

* L means long-run model * Product specifications are subject to change without further notice

In applications where only three phase power is available yet

single phase power is necessary the PowerShield Centurion

3/1 ticks all the boxes. Recommended in manufacturing

applications the Centurion 3/1 Series has all of the features of

the Centurion range with the added ability of accepting three

phase power to its input.

Like the Centurion range , the 3/1 range boasts the same User

friendly LCD display that allows the operator to interrogate

and program the UPS on the front panel as well as with the

included software. It also has a small footprint which will fit

any tight space requirement.

Models come standard with internal batteries. If a longer

back up time is required, the long run models with extra large

chargers are available. Back up from 5 minutes to 5 days with

the Centurion 3/1.

Centurion 3 to 1


Centurion 3/1

features• True double-conversion

• DSP technology guarantees high performance

• Wide input voltage range (110-300 VAC)

• Input power factor correction in all phases

• 50Hz/60Hz frequency converter mode

• Eco mode operation for energy saving (ECO)

• Programmable power outlets

• Emergency power off function (EPO)

• Generator compatible

• All models are Long Run

• USB+RS232 + SNMP + AS400 multiple communications

• Maintenance bypass available

• N+X parallel redundancy available

CENTURION 1G THREE PHASE/SINGLE PHASE SELECTION GUIDE

MODEL PSCE10KL3/1 PSCE15KL3/1 PSCE20KL3/1CAPACITY 10000 VA / 8000 W 15000 VA / 12000 W 20000 VA / 16000 WINPUTPhase Three Phase in/One Phase Out or One Phase in/One Phase out (User selectable)Voltage (Nominal) 240/415Vac (User Selectable)

Voltage Range

Low Line Transfer 176 VAC (phase voltage)@ 100% load110VAC (phase voltage) @ 50% load

Low Line Comeback 186 VAC (phase voltage) @ 100% load120VAC (phase voltage) @ 50% load

High Line Transfer 276 VAC (phase voltage) @ 100% load300VAC (phase voltage) @ 50% load

High Line Comeback 266 VAC (phase voltage) @ 100% load290VAC (phase voltage) @ 50% load

Frequency Range 46~54 Hz or 56~64Hz Power Factor ≧ 0.99 @ 100% loadTHDi < 6% @ 100% loadOUTPUTVoltage (ac mode) 240Vac (220, 230Vac User Selectable)AC Voltage Regulation (Batt. Mode) ± 1%Frequency Range (Synchronized Range) 46~54Hz or 56~64HzFrequency Range (Batt. Mode) 50 Hz ± 0.1 Hz or 60 Hz ± 0.1 HzCurrent Crest Ratio 3:1 (max.)

Harmonic Distortion ≧ 2 % THD (Linear Load) 5 % THD (Non-linear Load)

Transfer TimeAC Mode to Batt. Mode zeroInverter to Bypass zero

Waveform (Batt. Mode) Pure Sine WaveEFFICIENCYAC Mode 89%Battery Mode 86% 88% 87%BATTERY

Standard Model

Battery Type 12 V / 9 AHNumbers 20 40 40Typical Recharge Time 9 hours recover to 90% capacity 9 hours recover to 90% capacityCharging Current (max.) 1A 2A 2ACharging Voltage 273Vdc

Long-run Model

Battery TypeDepending on the capacity of external batteries

NumbersCharging Current (max.) 4A 8A 8ACharging Voltage 273Vdc

INDICATORSLCD Panel UPS status, Load level, Battery level, Input/Output voltage, Discharge timer, and Fault conditionsALARMBattery Mode Sounding every 4 secondsLow Battery Sounding every secondOverload Sounding twice every secondFault Continuously soundingPHYSICAL

Standard ModelDimension, D X W X H (mm) 592 X 250 X 576 815 x 250 x 826Net Weight (kgs) 83 164 164

Long-run ModelDimension, D X W X H (mm) 592 X 250 X 576 592 X 250 X 576 592 X 250 X 576Net Weight (kgs) 28 37 37

ENVIRONMENTOperation Humidity 0-95 % RH @ 0- 40°C (non-condensing)Noise Level Less than 58dB @ 1 MeterMANAGEMENTSmart RS232

PowerShield NetGuard software supports Windows, Linux, Unix, and MACUSBOptional SNMP Power management from SNMP manager and web browser

* L means long-run model * Product specifications are subject to change without further notice

In applications where only three phase power is available yet

single phase power is necessary the PowerShield Centurion

3/1 ticks all the boxes. Recommended in manufacturing

applications the Centurion 3/1 Series has all of the features of

the Centurion range with the added ability of accepting three

phase power to its input.

Like the Centurion range , the 3/1 range boasts the same User

friendly LCD display that allows the operator to interrogate

and program the UPS on the front panel as well as with the

included software. It also has a small footprint which will fit

any tight space requirement.

Models come standard with internal batteries. If a longer

back up time is required, the long run models with extra large

chargers are available. Back up from 5 minutes to 5 days with

the Centurion 3/1.



Newcastle P: +61 2 4014 9000 F: + 61 2 4014 9099

Brisbane P: +61 7 3846 2644 F: + 61 7 3846 2346





PowerhouseSystems







Group Company

PowerhouseSystems


Platinum

features• CentralisedcontrolcoordinatesthePFCrectifierandinverterbyDSP

• Switchingfrequency:15kHZ–lessnoise(higherfrequency)

• LowinputcurrentdistortionTHDi

• ExcellentoutputsupportsbothleadingandlaggingPowerfactorof0.1

• Unitypowerfactor(0.99)atlowoutputload(10%)

• IGBTtechnologyintheInverterandRectifier

• EasytouseLCDdisplayforalarmcontrol

Platinum

The New PowerShield Platinum Three Phase UPS

technology has been tried and tested throughout the

world. Designed by a leading Italian UPS manufacturer,

the Platinum model takes its place as the standard in

three phase applications. PowerShield has sourced this

UPS for our exclusive use in Australia.

Its specifications speak for themselves with perfect

uninterruptible power for sensitive data centres, medical

applications and manufacturing environments. The

space saving footprint design with a User Friendly LCD

screen makes the Platinum UPS the obvious three phase

choice.

The team at PowerShield can design a three phase

solution to suit all three phase solutions according to

loads and scalable runtimes for each application.

When a centralised uninterruptible power supply in

necessary, the PowerShield Platinum is the always the

best solution.

Model PSP10K PSP15K PSP20K PSP30K PSP40K PSP60K PSP80K

Nominal rating (kVA) 10kVA 15kVA 20kVA 30kVA 40kVA 60kVA 80kVA

Nominal rating (kW) 8KW 12KW 16KW 24KW 32KW 48KW 64KW

Input

Nominal voltage 240/415Vac (3Ph + N)

Input voltage Range +15%or–20%

Frequency 50/60 Hz ± 5 %

Total Harmonic Distortion (THDi) < 1.5% @ 100% load< 2.5% @ 50% load< 6.0% @ 10% load

< 1.0% @ 100% load< 2.0% @ 50% load< 5.0% @ 10% load

Power Factor 1.0

Inverter

Nominal Voltage 240/415Vac (3Ph + N)

Precision Stationary: ±1% Transitory: ±2% (load variations 100-0-100%)

Frequency 50/60 Hz synchronised ±4 %With mains absent ±0.05%

Max. Synchronisation Speed ±1 Hz/s

Waveform Pure Sinewave

Total Harmonic Distortion (THDv)


��

��

��

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �

��

��

powerhouse systems · current 21a (max.) 20a (max.) psophometric noise < 2mv at full load, over 600...

Documents