The Smart Energy Saver for the smart people . . .

Introducing …

Power Saver for Air Conditioners

This Presentation is specially prepared for the Hotel Industry, Residencies,

Guest

Houses, Company Quarters, Hospitals and all the premises that use Air

Conditioning for

longer durations and it is a major component of the electricity bills

Other Equipment usually comprises of Individual Water heaters, Television sets, lighting etc.

This Presentation is specially prepared for you !

Three point benifit of Power Saver for Air Conditioner…

For Sustainability …

and personal benefit too!

For Energy Saving …

How is the Energy Wasted in an Air Conditioner ?

• Energy loss occurs in an Air Conditioner due to two main reasons.

a) Operating the Air Conidtioners compressor after thermal saturation point is achieved inside the room.

b) Excess Cooling due to Hysteresis / intentional 1 degree difference in set temperature and actual cutoff temperature.

Thermal Saturation Point : In simple words it can be explained as an occurrence of a state when the air

conditioners compressor continues to operate inspite of the room temperature not being able to drop further below

a particular temperature point. This point is the thermal saturation point of the room and it is always changing, and

never constant. ( Refer FAQ of PSAC for more details)

Thermal saturation can be explained with an ideal example of boiling water. The Thermal Saturation point of water

is 100ºC. Thereafter whatever heat is supplied to the water is wasted and temperature of water does not rise

beyond 100 ºC even if the Gas is kept on full power. At this point of time only a little heat energy is required to

maintain the temperature of water at 100ºC. Even if the Gas is turned OFF and Turned ON again in few minutes, the

Water achieves the boiling point in almost no time.

Similarly when an air conditioned room achieves its thermal saturation point, it is meaningless to operate the

compressor of the Air Conditioner thus resulting in increased electricity consumption. Sometimes faulty thermostats

also result in non stop operation of the compressor there by resulting in increased electricity consumption. Also this

prevents the compressor from going into infinite operation cycles there-by increasing the life and reducing the wear

and tear of the compressor.

Note: The Thermostat inside the air conditioner only senses whether the set temperature is reached. It does not detect

the thermal saturation point.

How is the Energy Wasted in an Air Conditioner ?

• Excess Cooling prevention technology.

Even though the thermostat is responsible for cutting off the compressor when the desired temperature is reached, it

always cuts off the compressor when the room temperature reaches 1 or 2 degrees below the set temperature.

This 1 or 2 degree difference makes the compressor work extra for about 5 to 10 minutes extra on an average in each

cycle. Such accumulated extra operation events results to about approximately 1 hour of extra operation time.

This experiment can be conducted and observed by any lay man, by placing a Digital Thermometer in the Air Conditioned

room.

This is the main reason, why we sometimes experience chills even if the set temperature is slightly higher.

Also Faulty thermostats/ clogged / dusty thermostats tend to create excess chills due to improper sensing mechanism.

How does the Energy Saver / Power Saver work ?

• The power saver for Air Conditioner is 100% designed & manufactured in INDIA by Om

Energy Savers.

•It primarily saves energy by adopting the two concepts explained in the previous page,

i.e.

A) Thermal Saturation Prevention Technology , including Thermostat Failure protection/

B)Excess cooling prevention technology.

It saves about from 10% upto 40% Energy depending on model or PSAC and other

influencing factors.

For More information kindly read our Frequently Asked Questions.

Special Secret Feature…..shhh !

•A common problem hotel owners / managements face is that the customer

sets the temperature of the air conditioner too low! Eg: 18ºC. This temperature

is practically impossible to be achieved in Indian climatic conditions , except in

extreme winters.

•A special secret feature introduced by Om Energy Savers, especially for hotels

, guest rooms, residencies prevents the the Air conditioner from operating

below practically un-achievable temperatures. Eg: below 23ºC or 24ºC.

•This prevents the compressor from going into infinite operation cycles there-by

increasing the life and reducing the wear and tear of the compressor.

Some of our precious customers who have tried & tested our

Power Saver for Air Conditioner.

HPCL

BPCL

SIEMENS

Mahindra & Mahindra Nasik Vehicle Plant

Johnson & Johnson

Asian Paints

Aditya Birla group

Suzlon Energy

Max Life Insurance Co Ltd

CASTROL …. and many more….

Some reports of the test conducted at customer premises

Some reports of the test conducted at customer premises

Some reports of the test conducted at customer premises

Our Power Saver is tested by Central

Government Test Lab !!!

Many Power Saver for Air conditioners available in the

market may have a Govt

Test Lab report merely claiming savings by compromising on

the cooling and

comfort of the user.

Om Energy Savers Power Saver for Air Conditioner is the

first Power Saver

for Air Conditioner in India that was able to prove and

achieve energy saving

without compromising on the cooling and human comfort. (

Flexi Saving Model)

Copy available on request

Power saver for air conditioner

FEATURES ACSECO -01 ACSFIXS-01 ACSFLS-01 ACSFLSLCD-01 ACSCUS-01

1) MODEL NO ACS-ECO ACS-HTS ACS-MAX ACS-MAX-LCD ACS HC 01

2) OPERATING VOLTAGE 190 - 270 VAC 190 - 270 VAC 190 - 270 VAC 190 - 270 VAC 190 - 270 VAC

3) TONNAGE CAPACITY ( TR RATING ) UPTO 2 TONNE UPTO 2 TONNE UPTO 2 TONNE UPTO 2 TONNE FOR MORE THAN 2 TR

4) AIR CONDITIONER TYPE ( COMPATIBLITY) WINDOW & SPLIT AC WINDOW & SPLIT AC WINDOW & SPLIT AC WINDOW & SPLIT AC DUCTABLE / PACKAGE ETC

5) FOR HIGHER CAPACITY PACKAGE/ DUCTABLE AIR CONDITIONERS MORE THAN 2 TR

NO NO CUSTOMISED CUSTOMISED CUSTOMISED

6) OPERATING PRINCIPLE SMART CYCLE THERMAL SATURATION THERMAL SATURATION AND EXCSS COOLING PREVENTION

THERMAL SATURATION & EXCSS COOLING PREVENTION

THERMAL SATURATION AND EXCSS COOLING PREVENTION

7) ESTIMATED ENERGY SAVING DISPLAY* NO DISPLAY NO DISPLAY NO DISPLAY YES YES

8) Average %Age Saving Obtained* 10 to 15 % 15 to 25 % 15 to 35 % or More 15 to 35% or More 15 to 35 % or More.

8) INDICATORS YES , LED YES, LED YES, LED LCD DIDPLAY LCD DISPLAY

9 ) DESIGN BASE MICROCONTROLLER CHIP

MICROCONTROLLER CHIP

MICROCONTROLLER CHIP

MICROCONTROLLER CHIP

MICROCONTROLLER CHIP

10) ADDITIONAL SAVING MOTION SENSOR MODULE COMPATIBILITY FOR 20% EXTRA SAVING ( ROOM OCCUPANCY SENSING ) *

NO NO NO YES At Additional Cost

YES At Additional Cost

11) Payback period* 8 to 12 MONTHS 6 to 10 MONTHS 6 to 8 MONTHS 6 to 8 MONTHS 3 to 6 MONTHS

12) WARRANTY 2 YRS 2 YRS 2 YRS 2 YRS 3 YRS

Comparison & Technical Data of different models of Power Savers for Air Conditioner

Seeing is Believing…!

Seeing is believing. Call us for

a free demo* today and witness

the energy saving with your own

Eyes with the energy meter !!!

Note: Demos free within Mumbai City and Suburbs Only. Out station demos may be chargeable.

The Power Saver for Air Conditioner looks like this…

Models : ECO-01 / FIXS -01/ FLS01

Models : ECO-01 / FIXS -01/ FLSLCD - 01

Thank you for sparing your valuable time…

Om Energy Savers Team.

Manufactured and Distributed by

Om Energy Savers, C-306, Antophill Warehousing Complex, Vidyalankar College marg, Wadala (E),

Mumbai – 400 037. Maharashtra State. INDIA

Phone : 022-66355566/67/68 Mobile : 9323153504

Fax: 022-39166817.

Email :oes.sales@gmail.com / enquiry@omenergysavers.in