power over ethernet adapter kit -...

2
www.tp-link.com DescriptionFeaturesDelivers power and data through a single Ethernet cable for simple network extension Transmits power & data over an Ethernet cable up to 100m(328 feet) away Plug and play design provides a hassle free setup 12/9/5VDC triple output adapts to diffierent Ethernet-enable devices The TL-POE200 is designed to deliver power and data over a single Ethernet cable to an Ethernet enabled device up to 100m away. The PoE kit uses two devices, one, the ‘injector’ injects power and data into a single Ethernet cable while the other, the ‘splitter’ placed at the receiving end splits the power and data back into two cables to be used by the connected Ethernet device. This convenience allows users to place Ethernet enabled devices such as access points, IP cameras, or VoIP phones anywhere that they are best suited. As such, regardless of whether a power socket is available, connected devices are able to achieve the best performance where not previously possible in less optimal locations. TL-POE200 Power over Ethernet Adapter Kit

Upload: lamkhanh

Post on 14-Mar-2018

218 views

Category:

Documents


1 download

TRANSCRIPT

www.tp-link.com

Description:

Features:Delivers power and data through a singleEthernet cable for simple network extension

Transmits power & data over an Ethernetcable up to 100m(328 feet) away

Plug and play design provides a hassle freesetup

12/9/5VDC triple output adapts to di�erentEthernet-enable devices

The TL-POE200 is designed to deliver power and data over a single Ethernet cable to an Ethernet enabled

device up to 100m away. The PoE kit uses two devices, one, the ‘injector’ injects power and data into a single

Ethernet cable while the other, the ‘splitter’ placed at the receiving end splits the power and data back into

two cables to be used by the connected Ethernet device. This convenience allows users to place Ethernet

enabled devices such as access points, IP cameras, or VoIP phones anywhere that they are best suited. As

such, regardless of whether a power socket is available, connected devices are able to achieve the best

performance where not previously possible in less optimal locations.

TL-POE200

Power over Ethernet Adapter Kit

www.tp-link.comSpecifications are subject to change without notice. TP-LINK is a registered trademark of TP-LINK Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK Technologies Co., Ltd.

TL-POE200Power over Ethernet Adapter Kit

Diagram:

Package:- POE Adapter Kit TL-POE200

- One Power Adapter

- One Power Cord

- One RJ-45 Ethernet Cable

- User Guide

Related Products:- Load Balance Broadband Router

TL-R470T+

- 150Mbps Wireless N Access Point

TL-WA701ND

- PoE Injector

TL-POE150S

- PoE Splitter

TL-POE10R

Specifications:

Ports

Output Power for PoE Splitter

Input Power for PoE Injector

Standards IEEE 802.3, 802.3u, CSMA/CD, TCP/IP

TL-POE200A

1 10/100Mbps Auto-Negotiation RJ45 LAN port

1 10/100Mbps Auto-Negotiation RJ45 PoE port

1 48VDC Power Input Port

TL-POE200B

1 10/100Mbps Auto-Negotiation RJ45 LAN port

1 10/100Mbps Auto-Negotiation RJ45 PoE port

1 12/9/5VDC Power Output Port

100~240VAC

12/9/5VDC

PWR(Green)

FCC, CE

3.2*2.1*0.9 in.(80.8*54*24 mm)

0°C~40°C (32°F~104°F)

-40°C~70°C (-40°F~158°F)

10%~90% non-condensing

5%~90% non-condensing

LED Indicator

Operating Temperature

Storage Temperature

Operating Humidity

Storage Humidity

Dimensions

PoE Injector

TL-POE200A

Up to 100 meters

PoE Splitter

TL-POE200B

Up to 100 meters

PoE SplitterPoE Injector

Up to 100 meters

Data only

Data & PowerPower only

Legend:

Non-PoE IP Camera

Non-PoE IP Phone

Non-PoE Wireless NAccess Point

Load Balance Broadband Router

Safety & Emission